Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
� Load the document. � Select [Added Features]. � Select [Delayed Start]. � Select [ON] - the Delayed Start screen will be displayed. � Use the up/down scroll arrows to indicate the hour and minutes when you would like the fax to be transmitted. � Select [Save] and then [Start]. Send Priority (DC440/432) � Select [Added Features]. � Select [Send Priority]. � Select either [Normal] or [High]. � Select [Save]. NOTE: If a power outage occurs, all pending delay start jobs will be queued to start immediately once power is restored. Use this feature to choose either a high or normal priority for a fax job. If Normal is selected the job will not be sent until all the high priority jobs have been sent. NOTE: Send Priority can be used with Delayed Start. Page 4-24 Xerox Document Centre 440/432/420 User Guide
Advanced Features (Fax) Quick Pathway �Select [Features] on the control panel. �If necessary select the Fax tab. �Select [Advanced Features]. � Select [Added Features]. � Select [Advanced Features] the options available will be displayed. The Advanced Features tab offers additional programming features that can be applied when sending a fax. For more information about the features available refer to the following: Build Job - page 4-26 Poll Remote Fax - page 4-27 Store for Polling - page 4-28 Fax Mailbox - page 4-31 Original Size (DC440/432)/Mixed Size Originals (DC420) - page 4-34 Xerox Document Centre 440/432/420 User Guide Page 4-25 Fax
- Page 85 and 86: Edit (optional) Erase options Off n
- Page 87 and 88: Area Edit options Off the feature i
- Page 89 and 90: Output Format (Copy) Quick Pathway
- Page 91 and 92: N Up (2 Up - DC420) Transparency op
- Page 93 and 94: Annotation � Load the documents.
- Page 95 and 96: � If Off is selected, select comm
- Page 97 and 98: Inserts � Load the insert stock i
- Page 99 and 100: � After the last entry has been m
- Page 101 and 102: � Select either [Front Only] or [
- Page 103 and 104: Job Assembly (Copy) Build Job Quick
- Page 105 and 106: Stored Jobs � Program the job fea
- Page 107 and 108: � Select [Added Features] and the
- Page 109 and 110: Name the name of the job. For copy
- Page 111 and 112: Use the scroll buttons to move thro
- Page 113 and 114: 4 Fax Sending and receiving a facsi
- Page 115 and 116: 1. Select Features � If necessary
- Page 117 and 118: 3. Dial the number � Using the nu
- Page 119 and 120: The standard memory in the fax mach
- Page 121 and 122: Fine (200 x 200 dpi) recommended fo
- Page 123 and 124: Dialing � Enter the first fax num
- Page 125 and 126: Dial pause [-] to pause between num
- Page 127 and 128: Line 1 select this option if Line 1
- Page 129 and 130: To add numbers to the Current Dial
- Page 131 and 132: Added Features (Fax) Quick Pathway
- Page 133 and 134: Transmission Report � Load the do
- Page 135: Delayed Start The following options
- Page 139 and 140: Poll Remote Fax NOTE: Build Job can
- Page 141 and 142: � Load the document. � Enter th
- Page 143 and 144: Fax Mailbox � Select [Added Featu
- Page 145 and 146: � Select [Added Features]. � Se
- Page 147 and 148: Reports & Setups (Fax) Quick Pathwa
- Page 149 and 150: Answer Mode � Select [Answer Mode
- Page 151 and 152: � Use the soft keypad to enter th
- Page 153 and 154: Maximum Store Width determines the
- Page 155 and 156: � Select [Dial Directory]. � Us
- Page 157 and 158: LAN Fax (Local Area Network Fax) LA
- Page 159 and 160: and is displayed on either the top
- Page 161 and 162: Type the job category, such as rece
- Page 163 and 164: 5 Media Print Media Print allows a
- Page 165 and 166: � Select [Media Print]. � Selec
- Page 167 and 168: 6 Scan to File The Scan option will
- Page 169 and 170: Scan to EMail (DC440/432) Quick Pat
- Page 171 and 172: Scan to File Quick Pathway �Selec
- Page 173 and 174: � Load the documents in the Docum
- Page 175 and 176: Added Features (Scan Setups) Quick
- Page 177 and 178: Basic Image Quality Adjusts the set
- Page 179 and 180: Reduce/Enlarge Adjusts the magnific
- Page 181 and 182: Erase Used to erase unwanted marks
- Page 183 and 184: Server IP Address /Server Name Docu
- Page 185 and 186: Filing Policy use to temporarily ch
Advanced Features (Fax)<br />
Quick Pathway<br />
�Select [Features] on<br />
the control panel.<br />
�If necessary select the<br />
Fax tab.<br />
�Select [Advanced<br />
Features].<br />
� Select [Added Features].<br />
� Select [Advanced Features]<br />
the options available will be<br />
displayed.<br />
The Advanced Features tab offers additional programming<br />
features that can be applied when sending a fax. For more<br />
information about the features available refer to the following:<br />
Build Job - page 4-26<br />
Poll Remote Fax - page 4-27<br />
Store for Polling - page 4-28<br />
Fax Mailbox - page 4-31<br />
Original Size (DC<strong>440</strong>/<strong>432</strong>)/Mixed Size Originals (DC<strong>420</strong>) -<br />
page 4-34<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 4-25<br />
Fax
Change language