Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
Standard Features (Fax) Resolution Quick Pathway �Select [Features] on the control panel. �If necessary select [Fax]. �Select the features available on the first Fax screen. The first Fax screen offers access to the features required to send a fax. For more information about the features available refer to the following: Resolution - page 4-8 Original Type - page 4-9 Sides Scanned - page 4-10 Dialing- page 4-11 The resolution affects the appearance of the fax at the receiving fax terminal. A higher resolution yields better quality for photos. A lower resolution reduces communication time. Standard (200 x 100 dpi) recommended for text documents. It requires less communication time, but does not produce the best image quality for graphics and photos. Page 4-8 Xerox Document Centre 440/432/420 User Guide
Fine (200 x 200 dpi) recommended for line art. It produces output with a resolution between super fine and standard. This is the default resolution and the best choice in most cases. Super Fine (400 x 400 dpi) recommended for photos and halftones, or images that have graytones. It requires more communication time, but produces the best image quality. Original Type Use this feature to identify the type of document being scanned for transmission. Text use this setting for text, line art and documents with large solid areas. It produces sharp text images, but might reduce the quality of halftone or photographic images. This is the factory default setting. Auto senses the image and automatically selects the best text or photo option. Use this setting for combinations of text and photos, or text and graphics. Photo use this setting for photographs and images that have a continuous tone. However, it might reduce the sharpness of the text. Xerox Document Centre 440/432/420 User Guide Page 4-9 Fax
- Page 69 and 70: � With the documents face up, sli
- Page 71 and 72: Portrait Images Landscape Images. H
- Page 73 and 74: Paper Supply - Normal — reduces o
- Page 75 and 76: Image Quality options Text used for
- Page 77 and 78: Image Adjustment tab (Copy) � Sel
- Page 79 and 80: To produce size for size copies �
- Page 81 and 82: Bound Originals options Off the fea
- Page 83 and 84: Expert Image Quality � Select the
- Page 85 and 86: Edit (optional) Erase options Off n
- Page 87 and 88: Area Edit options Off the feature i
- Page 89 and 90: Output Format (Copy) Quick Pathway
- Page 91 and 92: N Up (2 Up - DC420) Transparency op
- Page 93 and 94: Annotation � Load the documents.
- Page 95 and 96: � If Off is selected, select comm
- Page 97 and 98: Inserts � Load the insert stock i
- Page 99 and 100: � After the last entry has been m
- Page 101 and 102: � Select either [Front Only] or [
- Page 103 and 104: Job Assembly (Copy) Build Job Quick
- Page 105 and 106: Stored Jobs � Program the job fea
- Page 107 and 108: � Select [Added Features] and the
- Page 109 and 110: Name the name of the job. For copy
- Page 111 and 112: Use the scroll buttons to move thro
- Page 113 and 114: 4 Fax Sending and receiving a facsi
- Page 115 and 116: 1. Select Features � If necessary
- Page 117 and 118: 3. Dial the number � Using the nu
- Page 119: The standard memory in the fax mach
- Page 123 and 124: Dialing � Enter the first fax num
- Page 125 and 126: Dial pause [-] to pause between num
- Page 127 and 128: Line 1 select this option if Line 1
- Page 129 and 130: To add numbers to the Current Dial
- Page 131 and 132: Added Features (Fax) Quick Pathway
- Page 133 and 134: Transmission Report � Load the do
- Page 135 and 136: Delayed Start The following options
- Page 137 and 138: Advanced Features (Fax) Quick Pathw
- Page 139 and 140: Poll Remote Fax NOTE: Build Job can
- Page 141 and 142: � Load the document. � Enter th
- Page 143 and 144: Fax Mailbox � Select [Added Featu
- Page 145 and 146: � Select [Added Features]. � Se
- Page 147 and 148: Reports & Setups (Fax) Quick Pathwa
- Page 149 and 150: Answer Mode � Select [Answer Mode
- Page 151 and 152: � Use the soft keypad to enter th
- Page 153 and 154: Maximum Store Width determines the
- Page 155 and 156: � Select [Dial Directory]. � Us
- Page 157 and 158: LAN Fax (Local Area Network Fax) LA
- Page 159 and 160: and is displayed on either the top
- Page 161 and 162: Type the job category, such as rece
- Page 163 and 164: 5 Media Print Media Print allows a
- Page 165 and 166: � Select [Media Print]. � Selec
- Page 167 and 168: 6 Scan to File The Scan option will
- Page 169 and 170: Scan to EMail (DC440/432) Quick Pat
Fine (200 x 200 dpi) recommended for line art. It produces output with a resolution<br />
between super fine and standard. This is the default resolution<br />
and the best choice in most cases.<br />
Super Fine (400 x 400 dpi) recommended for photos and halftones, or images that have<br />
graytones. It requires more communication time, but produces<br />
the best image quality.<br />
Original Type<br />
Use this feature to identify the type of document being scanned<br />
for transmission.<br />
Text use this setting for text, line art and documents with large solid<br />
areas. It produces sharp text images, but might reduce the<br />
quality of halftone or photographic images. This is the factory<br />
default setting.<br />
Auto senses the image and automatically selects the best text or<br />
photo option. Use this setting for combinations of text and<br />
photos, or text and graphics.<br />
Photo use this setting for photographs and images that have a<br />
continuous tone. However, it might reduce the sharpness of<br />
the text.<br />
<strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong> Page 4-9<br />
Fax
Change language