Xerox Document Centre 440/432/420 User Guide

3. Dial the number
� Using the numeric keypad,
enter the fax number.
If a character is normally dialed
before the telephone number,
for example 9 for an outside
line, a pause will need to be
entered after this character -
select [Dial Pause] on the
control panel before continuing
to enter the fax number.
NOTE: Dial Pause is displayed
as a dash. When using manual
dialling, the Dial Pause
character is not required;
instead wait for the outside line
dial tone before proceeding. Dial Pause button
4. Select Start
� Select [Start].
The Fax Job Monitor pop-up
window will be displayed. This
shows information about the fax
job.
The Document Centre scans
the images and places them in
its memory.
Xerox Document Centre 440/432/420 User Guide Page 4-5
Fax