Xerox Document Centre 440/432/420 User Guide
Xerox Document Centre 440/432/420 User Guide Xerox Document Centre 440/432/420 User Guide
A password is required to release a Secure Print job. Each user sets his or her password(s) at the network user application driver. Different passwords for each job, or one password for all jobs can be set. Other jobs in the queue bypass this job and are completed. After a problem has been resolved, or when the held job is ready to print, select the job and select Release. Delete deletes the selected job from the Print Queue. After the job is deleted, all of the resources allocated to that job are also released. In an open system (no access control), any job can be deleted by any user. If an active job is deleted, it stops printing immediately and is placed in the Completed Print Jobs Queue, where it is listed as Canceled by User. If a pending job is deleted, it is removed from the Print Queue and is placed in the Completed Print Jobs Queue, where it is listed as a canceled job. NOTE: Only the owner of a job should delete the job. Details displays additional programming information about the jobs in the Print Queue. For held jobs, the Details screen includes information about how to release the job. Other Queues displays the other job queues available. Completed Print Jobs Queue Maintains completed print jobs. Jobs are considered complete when they are successfully printed, or terminated due to user request or a fault. The queue contains the last 50 completed print jobs. Jobs are maintained on a first-in, first-out basis and organized in order of completion. Page 3-54 Xerox Document Centre 440/432/420 User Guide
Use the scroll buttons to move through the jobs in the queue. Item the number in sequence for the job. Name the name of the document or the remote terminal. Type the type of job, for example Copy. Owner the creator of the job. For print jobs, this is the person who submitted the job. Status information about the progress of the completed job. This includes completed jobs, faulted jobs, jobs canceled by users and jobs canceled by the system. Time completed the time and date when the job entered the queue. Use the toolbar across the top of the Completed Print Jobs Queue to manage jobs. Details displays additional information about the jobs in the queue. Other Queues displays the other job queues available. Xerox Document Centre 440/432/420 User Guide Page 3-55 Copy
- Page 59 and 60: � Before placing the documents in
- Page 61 and 62: Constant Velocity Transport Glass 2
- Page 63 and 64: 4. Enter the quantity � Use the n
- Page 65 and 66: Standard Features (Copy) Output Qui
- Page 67 and 68: 1,2,3. � Select and release the b
- Page 69 and 70: � With the documents face up, sli
- Page 71 and 72: Portrait Images Landscape Images. H
- Page 73 and 74: Paper Supply - Normal — reduces o
- Page 75 and 76: Image Quality options Text used for
- Page 77 and 78: Image Adjustment tab (Copy) � Sel
- Page 79 and 80: To produce size for size copies �
- Page 81 and 82: Bound Originals options Off the fea
- Page 83 and 84: Expert Image Quality � Select the
- Page 85 and 86: Edit (optional) Erase options Off n
- Page 87 and 88: Area Edit options Off the feature i
- Page 89 and 90: Output Format (Copy) Quick Pathway
- Page 91 and 92: N Up (2 Up - DC420) Transparency op
- Page 93 and 94: Annotation � Load the documents.
- Page 95 and 96: � If Off is selected, select comm
- Page 97 and 98: Inserts � Load the insert stock i
- Page 99 and 100: � After the last entry has been m
- Page 101 and 102: � Select either [Front Only] or [
- Page 103 and 104: Job Assembly (Copy) Build Job Quick
- Page 105 and 106: Stored Jobs � Program the job fea
- Page 107 and 108: � Select [Added Features] and the
- Page 109: Name the name of the job. For copy
- Page 113 and 114: 4 Fax Sending and receiving a facsi
- Page 115 and 116: 1. Select Features � If necessary
- Page 117 and 118: 3. Dial the number � Using the nu
- Page 119 and 120: The standard memory in the fax mach
- Page 121 and 122: Fine (200 x 200 dpi) recommended fo
- Page 123 and 124: Dialing � Enter the first fax num
- Page 125 and 126: Dial pause [-] to pause between num
- Page 127 and 128: Line 1 select this option if Line 1
- Page 129 and 130: To add numbers to the Current Dial
- Page 131 and 132: Added Features (Fax) Quick Pathway
- Page 133 and 134: Transmission Report � Load the do
- Page 135 and 136: Delayed Start The following options
- Page 137 and 138: Advanced Features (Fax) Quick Pathw
- Page 139 and 140: Poll Remote Fax NOTE: Build Job can
- Page 141 and 142: � Load the document. � Enter th
- Page 143 and 144: Fax Mailbox � Select [Added Featu
- Page 145 and 146: � Select [Added Features]. � Se
- Page 147 and 148: Reports & Setups (Fax) Quick Pathwa
- Page 149 and 150: Answer Mode � Select [Answer Mode
- Page 151 and 152: � Use the soft keypad to enter th
- Page 153 and 154: Maximum Store Width determines the
- Page 155 and 156: � Select [Dial Directory]. � Us
- Page 157 and 158: LAN Fax (Local Area Network Fax) LA
- Page 159 and 160: and is displayed on either the top
A password is required to release a Secure Print job. Each user<br />
sets his or her password(s) at the network user application<br />
driver. Different passwords for each job, or one password for<br />
all jobs can be set. Other jobs in the queue bypass this job and<br />
are completed.<br />
After a problem has been resolved, or when the held job is<br />
ready to print, select the job and select Release.<br />
Delete deletes the selected job from the Print Queue. After the job is<br />
deleted, all of the resources allocated to that job are also<br />
released. In an open system (no access control), any job can<br />
be deleted by any user. If an active job is deleted, it stops<br />
printing immediately and is placed in the Completed Print Jobs<br />
Queue, where it is listed as Canceled by <strong>User</strong>. If a pending job<br />
is deleted, it is removed from the Print Queue and is placed in<br />
the Completed Print Jobs Queue, where it is listed as a<br />
canceled job.<br />
NOTE: Only the owner of a job should delete the job.<br />
Details displays additional programming information about the jobs in<br />
the Print Queue. For held jobs, the Details screen includes<br />
information about how to release the job.<br />
Other Queues displays the other job queues available.<br />
Completed Print Jobs Queue<br />
Maintains completed print jobs. Jobs are considered complete<br />
when they are successfully printed, or terminated due to user<br />
request or a fault. The queue contains the last 50 completed<br />
print jobs. Jobs are maintained on a first-in, first-out basis and<br />
organized in order of completion.<br />
Page 3-54 <strong>Xerox</strong> <strong>Document</strong> <strong>Centre</strong> <strong>440</strong>/<strong>432</strong>/<strong>420</strong> <strong>User</strong> <strong>Guide</strong>