Xerox Document Centre 440/432/420 User Guide

Stored Jobs
� Program the job features.
� Select [Added Features].
� Select [Job Assembly].
� Select [Stored Job].
� If required, use the scroll
arrows to select an empty job
in the Store Job list.
NOTE: Inserts or Interrupt cannot be used with Build Job. The
Build Job 2 Sided selection will only copy Portrait documents
in Head to Head or Head to Toe orientation.
Up to 8 combinations of feature selections can be retained in
the machine memory as stored jobs. The machine stores only
the programming for the job, not the image. Each time a stored
job is used, the image must be scanned. The Stored Job touch
screen displays a list of all stored jobs.
Stored jobs are set to Off as the default. Contact the Key
Operator to change this feature to On.
To store a job
Xerox Document Centre 440/432/420 User Guide Page 3-49
Copy