Control systems

The complete range of multicode
receivers with management
of Identity Codes and Certifi cates.
With connector, pre-wired,
with and without built-in transmitter.
Available in two versions:
• 433.92 MHz;
• 868.46 MHz.
Technical specifi cations
Frequency
reception
Frequency
transmission
-
OXI
OXIT
OX2
433.92 MHz
433.92 MHz
-
OX2T 433.92 MHz
OXIFM
-
OXITFM
OX2FM
868.46 MHz
868.46 MHz
-
OX2TFM 868.46 MHz
Each receiver in the series One has its own
secret identifi cation number known as
a Certifi cate to distinguish it from all others.
The Certifi cate can also be programmed
on the transmitter in the One range which
uses it as an enable code to interact
with the receiver.
Practical and functional:
the built-in transmitter of the receivers
OXIT/OXITFM and OX2T/OX2TFM
enables bi-directional communication
with the multi-functional O-Box interface;
enables operations such as download
of radio codes, management of certifi cates
and passwords directly on the receiver, also
when located in positions diffi cult to access.
3 password-protected levels.
Receivers
Impedance
input Sensitivity Decoding
52 Ohm
>0,5 μ V
for signal
successful
>0,8 μ V
for signal
successful
O-Code,
Smilo,
FloR,
Flo, TTS
O-Code
Internal transmitter:
the receivers OXIT/OXITFM and OX2T/OX2TFM
can be used as signal repeaters to increase
the operating distance between transmitters
and other possible receivers in the One series.
By means of O-Box, the new receivers
in the One series can also be interfaced
with a PC or PDA for simple and rapid
programming of certifi cates.
3 programming modes.
Multicode:
receivers in the One series are compatible
with the transmitters with encoding
system O-code One at 868.46 MHz
and at 433.92 MHz and Smilo, Flo, FloR, TTS
(only for One at 433.92 MHz) for multi-group
transmission, which enables the delivery
of multiple commands simultaneously
from a single transmitter.
433.92 MHz, with connector
Code Description Pc./Pack
OXI 4 channels, without built-in transmitter 1
OXIT 4 channels, with built-in transmitter 1
868.46 MHz, with connector
Code Description Pc./Pack
OXIFM 4 channels, without built-in transmitter 1
OXITFM 4 channels, with built-in transmitter 1
433.92 MHz, pre-wired
Code Description Pc./Pack
OX2 2 channels, without built-in transmitter 1
OX2T 2 channels, with built-in transmitter 1
868.46 MHz, pre-wired
Code Description Pc./Pack
OX2FM 2 channels, without built-in transmitter 1
OX2TFM 2 channels, with built-in transmitter 1
Number
of channels Contact relay Power supply Absorption
4
(15 on BUS T4)
2
4
(15 on BUS T4)
2
- 5 Vdc 30 mA (max)
max 0.5 A
50 V (NA)
from 12 to 28
Vdc/Vac
80 mA (max)
with relays
active
- 5 Vdc 30 mA (max)
max 0.5 A
50 V (NA)
from 12 to 28
Vdc/Vac
100 mA (max)
with relays
active
Protection
rating
IP 30
Dimensions
weight
50x19x45 h
mm, 20 g
58x86x22 h
mm, 55 g
50x19x45 h
mm, 20 g
58x86x22 h
mm, 55 g
Nice Gate&Door 139
Alphabetic index Nice Classics Control systems and accessories For garage and industrial doors Barrier gate operator systems For sliding gates For swing gates