IBM Tivoli Netcool/OMNIbus SNMP Writer Gateway: Reference Guide

Table 7. Gateway-specific properties (continued)
Property name Command line option Description
Gate.SNMP.EngineID string -snmpengineid string Use this property to specify
the engine ID of the gateway.
This identifies the gateway as
the source of the SNMP V3
traps.
Gate.SNMP.
ForwardUpdates boolean
The default is 0x0102030405.
Note: This property is only
used with SNMP V3 traps and
must match the engine ID
specified in the configuration
file of the receiver.
-snmpforwardupdates boolean Use this property to specify
whether or not the gateway
forwards alert updates to the
ObjectServer. In effect, the
original alert is duplicated but
will include the updated data.
Gate.SNMP.Gateway string -snmpgateway string
The default is FALSE.
Use this property to specify
the IP address and port to
which the gateway forwards
traps.
12 IBM Tivoli Netcool/OMNIbus SNMP Writer Gateway: Reference Guide
The default is 127.0.0.1:162.
Note:
If you are operating in an
IPv4 environment, specify this
location in IPv4 format as
address:port.
For example: 127.0.0.1:8080
If you are operating in an
IPv6 environment, specify this
location in IPv6 format,
preceded by tcp6 or udp6 (as
appropriate), and followed by
the port number, as
tcp6|udp6:address:port.
For example:
tcp6:[::01]:6666