HCAC Collet Adaptation Chucks
HCAC Collet Adaptation Chucks
HCAC Collet Adaptation Chucks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
26<br />
FlexC <strong>Collet</strong> <strong>Chucks</strong> for CNC Lathes<br />
42 and 65mm Quick-change Vulcanized <strong>Collet</strong>s<br />
• Mount to A2-5, A2-6, A2-8 and some flat-back spindle noses<br />
• Gipping range of ±.020" (.5mm) above and below its nominal size to<br />
allow variation in bar stock<br />
• Guaranteed accuracy within .0004" (.010mm) TIR collet system styles<br />
A and D {.0008" (.020mm) TIR for style DL.}<br />
• <strong>Collet</strong> heads change out in 20 seconds using a compression wrench<br />
• True parallel gripping<br />
• 42mm, 65mm, and S-Master sizes<br />
• Round smooth, round serrated, hexagon serrated and square smooth shapes.<br />
Refer to separate brochure #2382 for more information.<br />
Custom-Engineered <strong>Collet</strong> <strong>Adaptation</strong> <strong>Chucks</strong><br />
Hydraulic Dead-Length ®<br />
<strong>Collet</strong> <strong>Adaptation</strong> Chuck<br />
Style D—Pull-back with<br />
thru-hole for bar work<br />
Style A—Pull-back with<br />
removable Dead-Length ®<br />
work stop<br />
Style DL—Push-to-close<br />
Dead-Length ®<br />
Did you find what you were looking for?<br />
Call and ask for one of our collet application engineers. They will be happy<br />
to look at your requirements and give you a reasonable quote and delivery<br />
schedule. Look to Hardinge for all your special requirements –<br />
<strong>Collet</strong> <strong>Adaptation</strong> <strong>Chucks</strong>, <strong>Collet</strong>s, Feed Fingers, Step <strong>Chucks</strong>, Expanding<br />
<strong>Collet</strong>s, 3-Jaw Power <strong>Chucks</strong> and Jaws. Call 800.843.8801.