HCAC Collet Adaptation Chucks
HCAC Collet Adaptation Chucks
HCAC Collet Adaptation Chucks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Quick to mount on all<br />
spindle configurations:<br />
• ANSI American Standard<br />
<strong>Chucks</strong> for A1 and A2 spindles<br />
• Taper-Key Drive <strong>Chucks</strong> for<br />
#00, #0, #1, #2 spindles<br />
• Cam-Lock <strong>Chucks</strong> for D1-3",<br />
D1-4", D1-5", DI-6" and D1-8"<br />
spindles<br />
• Threaded-Nose <strong>Chucks</strong> for<br />
2 1 ⁄4" - 8 TPI spindles<br />
• Plain-Back <strong>Chucks</strong> for 5", 5 3 ⁄4",<br />
and 6 1 ⁄4" plain-back spindles<br />
Hardinge-Sjogren Speed <strong>Collet</strong> <strong>Chucks</strong> provide greater collet capacity, reduced<br />
machining time and increased accuracy as compared to using a 3-jaw chuck. The<br />
manual chuck easily mounts to your lathe’s spindle, enabling the use of precision<br />
hardened and ground collets.<br />
The 5C Hardinge threaded or taper spindle nose versions allow the use of step<br />
chucks with closers for larger diameter secondary operation work. The 5C and 3J<br />
spindles can accept Hardinge Sure-Grip ® Expanding collets which grip parts with<br />
1 ⁄ 2" (12.70mm) to 4" (101.60mm) bores.<br />
Increase Capacity: The Hardinge-Sjogren Speed <strong>Collet</strong> Chuck increases the lathe’s<br />
capacity 25% to 40% compared to a lathe with a standard collet closing attachment.<br />
The Hardinge-Sjogren Speed <strong>Collet</strong> Chuck takes advantage of the full spindle bore<br />
— there is no draw tube.<br />
Save Time: An almost effortless turn of the hand wheel automatically opens or<br />
closes the collet, releasing or gripping the workpiece as desired. The chuck is easily<br />
adjusted to grip a thin wall part which may be crushed with a standard collet closer.<br />
Use Precision-machined or Emergency <strong>Collet</strong>s: The Precision-machined collets<br />
provide an extremely long life and superior TIR as compared with a 3-jaw chuck.<br />
The emergency collet is for chucking diameters when a standard Precision-machined<br />
collet is not available.<br />
Sjogren Speed <strong>Collet</strong> <strong>Chucks</strong><br />
For Manual Machines<br />
Use standard 5C, 2J, 3J and 22J collets on toolroom<br />
lathes, engine lathes, and grinding machines to increase<br />
your machine capacity!<br />
CAUTION: Hardinge-Sjogren Speed <strong>Collet</strong> <strong>Chucks</strong> are designed to operate at speeds of 4,000 rpm<br />
or less. <strong>Chucks</strong> that feature a Hardinge threaded- or taper-nose spindle should not be operated in<br />
excess of 3,000 rpm when a step chuck with closer is used.<br />
21<br />
www.shophardinge.com