service manual sacd/dvd receiver - Diagramas Gratis - Diagramas ...
service manual sacd/dvd receiver - Diagramas Gratis - Diagramas ...
service manual sacd/dvd receiver - Diagramas Gratis - Diagramas ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HCD-S550/S880<br />
• Code list of Emergency History<br />
10: Communication to RF AMP (IC001) failed.<br />
11: Each servo for focus, tracking, and spindle is unlocked.<br />
12: Check sum error of EEPROM (IC203).<br />
14: Communication to servo DSP (IC401) failed, or servo DSP<br />
decoder (IC801) is faulty.<br />
15: Communication to DVD decoder (IC701) failed, or DVD<br />
decoder (IC801) is faulty.<br />
16: Communication to DSD decoder (IC801) failed, or DSD<br />
decoder (IC801) is faulty.<br />
20: Initialization of sled servo failed. It is not placed in the initial<br />
position.<br />
23: Sled servo operation error.<br />
24: Made a request to move the sled servo to wrong position.<br />
30: Tracking balance adjustment error.<br />
31: Tracking gain adjustment error.<br />
33: Focus bias adjustment error.<br />
34: Focus gain adjustment error.<br />
35: Equalizer adjustment error.<br />
40: Focus servo does not operate.<br />
41: With a DVD dual layer disc, focus jump failed.<br />
50: CLV (spindle) servo does not operate.<br />
51: Spindle does not stop.<br />
60: Made a request to seek nonexistent address.<br />
61: Seek error of retry more than regulated times.<br />
70: Control data could not be read.<br />
80: Disc reading failed.<br />
5. MECHA ERROR HISTORY<br />
On the Test Mode Menu screen, selecting [5] displays the information<br />
of mechanism deck error history.<br />
The history information from last 1 up to 8 can be scrolled with<br />
the O key or o key. Also, specific information can be displayed<br />
by directly entering that number with ten keys.<br />
26<br />
### Mecha Error History ###<br />
1. aa bb cc xx xx xx xx xx<br />
2. aa bb cc xx xx xx xx xx<br />
3. aa bb cc xx xx xx xx xx<br />
4. aa bb cc xx xx xx xx xx<br />
5. aa bb cc xx xx xx xx xx<br />
6. aa bb cc xx xx xx xx xx<br />
7. aa bb cc xx xx xx xx xx<br />
8. aa bb cc xx xx xx xx xx<br />
Scroll:UP/DOWN<br />
(1.Latest Err.) Exit: RETURN<br />
aa: Initialization is completed or not.<br />
FF : Complete.<br />
other number : Not complete.<br />
bb: Operating status of mechanism deck at an error occurred.<br />
(lod sq jcp)<br />
00 : Initializing.<br />
10 to 15 : Open operating.<br />
16 to 19 : Kicking cause open failed.<br />
1A to 1F : Open operating.<br />
20 to 27 : Complete the open operation.<br />
28 : No disc and complete the open operation.<br />
29 to 2F : Complete the open operation.<br />
30 to 3F : Close requesting.<br />
40 to 4F : Open requesting.<br />
50 to 5F : Close operating.<br />
60 to 6F : Complete the chucking operation.<br />
80 to 8F : Complete the release operation.<br />
(BU is home position)<br />
90 to 9F : BU down operating.<br />
A0 to AF : Opening/closing the shutter. Or stationary state in<br />
open/close the shutter is enablement.<br />
B0 to BF : BU up requesting.<br />
C0 to CF : BU down requesting.<br />
D0 to DF : BU upping.<br />
E0 to EF : No disc checking in disc loading.<br />
cc: Operating status of mechanism deck at an error occurred.<br />
(lod oq jcp)<br />
00 : Complete the operation.<br />
10 to 1F : Open operating.<br />
20 to 2F : Close operating.<br />
30 to 3F : Release operating.<br />
60 to 6F : Chucking operating.<br />
70 to 7F : Kicking operating.<br />
80 to 8F : Returning the BU to home position. (after kicking)