AT&T UNIX™PC Unix System V Users Manual - tenox

ASYNC_MAIN( IC ) ASYNC_MAIN ( IC )
NAME
async_main - vt100, b513 terminal emulation program
SYNOPSIS
async_main e profile
async_main r profile f ldev lttyOOO
async_main r profile r 1 dev 1 phx i phfd P pid
DESCRIPTION
Async_main is used to communicate with a host computer using
vt100 or b513 escape and control sequences and to edit communication
profiles. Async_main may be used with any of ports
ldevlttyOOO or ldevlphx, where xis 0 or 1, to communicate
with a host.
Use the first form above to edit (e) a profile. Profile must contain
the full path name of the file to be edited. The profile suffix for
ldevlttyOOO is tA.2 and for ldevlphx the suffix is tAm.
To run async_main via ldevlttyOOO, use the second form above.
Again, profile must contain the full path name of the file to be
used in the run ( r) session.
To run async_main via ldevlphO or ldevlphl, use the third
form above. Phfd is the phone file descriptor. The calling process
must first open the device file via open(2) and pass the phone file
descriptor to async_main . Pid is the process ID of the calling process.
- 1 -