Industrial & large bore hoses - Gates Fleximak

CAT No. 08.08 Section 04.
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE
INDEX Bold Gates Fleximak PN Represents Standard Stock Holding
Application Gates Fleximak PN Specifications Section
Air & Multi-Purpose 14 Bar EPDM RAF200 Adapta Flex TM 4.2
Air & Multi-Purpose 17 Bar Nitrile C RPF250 Premo Flex ® ) 4.3
Air & Multi-Purpose 20 Bar Nitrile C RPF300 Premo Flex ® 4.3
Air & Multi-Purpose, Lock-On 20 Bar RLO300 LOL Plus 4.4
Air & Multi-Purpose, 35 Bar RTR500 Terminator ® 4.5
Water Suction Delivery 10 Bar WSD150 Barracuda ® 4.6
Super-Vac (to replace OSD150 ITR) RSV150 / RSV100 Gates Super-Vac 150 psi / 100psi 4.7
Steam Hose 18 Bar R2A-xx SH-RED Steam Queen 232 MB 4.8
Breathing Air Low Pressure 30 Bar RLPBA Diver-100 EN 250 N/L 4.9
Divers’ Air Hose 1125psi (3/8 & ½”) RDIVER/ 33B Divers’ Air 33HB 4.10
Air Drill – Wire Braid RAD500 Gates Air Drill 18MB 4.11
Large Bore Marine & Oilfield Hose 4.12
Water Suction Delivery 14 Bar WSD200 Gates Fleximak 4.13
Water Delivery 40 Bar RWD600 Gates Fleximak 4.13
Water Delivery 70 Bar RWD1000 Gates Fleximak 4.14
Bulk Cement Delivery 10 Bar RDC150 Gates Fleximak 4.14
Chemical Acid (EPDM) 16 Bar RCE235 Gates Fleximak 4.15
Concrete Placement 80 Bar RCP1230 Gates Fleximak 4.15
Mud Suction 10 Bar RMS150 Gates Fleximak 4.16
Dock Loading BS1435 L15 RFD250 Gates Fleximak 4.16
Dock Loading BS1435 S15 RDH250 Gates Fleximak 4.17
Oilfield Multi-Purpose 15 Bar RGD220 Gates Fleximak 4.17
Oilfield Multi-Purpose 10 Bar RGP150 Gates Fleximak 4.18
Oilfield Multi-Purpose 20 Bar RGP300 Gates Fleximak 4.18
Oil Delivery 40 Bar ROD600 Gates Fleximak 4.19
Fire Deluge Hose 20 Bar RFW300 Gates Fleximak 4.19
End Fittings HA Series 4.20
End Fittings Selection Chart 4.21
MATERIAL CODES
Structure Materials Code Temp°C Applications
Natural Rubber NR -20 to +80 Water, Air, Abrasives, Inert fluids, Foods (W)
Synthetic Rubber SBR -40 to +90 Water, Air, Abrasives, Oil Mist Resistance
Nitrile NBR -30 to +100 Standard Hydrocarbons up to 55% Aromatics
Viton FKM -20 to +160 Chemical, Hydrocarbons, High Temperatures
Hypalon CSM -20 to +130 Chemical, Acids, High Aromatics
Ethylene Propylene EPDM -20 to +130 Some Acids, Caustics, Chemical, Steam
Cross-linked Polyethylene XLPE -20 to +70 Some Acids, Chemical
Chloroprene (Neoprene) CR -30 to +120 Hydrocarbons, Abrasion Resistant Covers
Ultra High Molecular Weight PE UHMWPE -30 to +93 Hydrocarbons, Acids, Chemicals
Polytetraflouroethylene (Teflon ®) PTFE -200to+260 Most Chemicals & Acids, High Temperature
The Standard Industrial Hose range is used in conjunction with Industrial Hose Couplings using Stainless Steel Strapping, Bolt
Clamp, and Hose Clips for attachment means. Fuel Hoses use Internal Swaged or Reusable Ends.
These assemblies are designed for low-pressure applications where the following end fittings are commonly used. These
coupling products can be found in Section 05 of this catalogue - Industrial Fittings:
� Steel and Stainless Steel King Nipples (Combination Nipples)
� Crow Foot Couplings (Universal or Air King Couplings)
� Aluminium, Brass or Stainless Steel Cam and Groove Couplings (Camlock Couplings)
� Boss Couplings
� Steam Couplings etc.,
� Holedall Internal Swage Couplings
If assemblies are required to have pressure tests at 1.5 times the rated working pressure of the hose used, it is recommended
that end fittings are attached by internal or externally swaged or both. These products can be found in Section 05 of this
catalogue - Large Bore Marine and Oilfield Hoses.
For items not shown in this catalogue, please consult Gates Fleximak for more information on the products or specifications you require
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
1