Industrial & large bore hoses - Gates Fleximak
Industrial & large bore hoses - Gates Fleximak
Industrial & large bore hoses - Gates Fleximak
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The World’s Most Trusted Name In Belts, Hose, Hydraulics & Related Services<br />
Dubai • Jebel Ali • Sharjah • Abu Dhabi • Doha • Dammam • Jubail • Kuwait • Addis Ababa<br />
I N D U S T R I A L & L A R G E B O R E H O S E S
INDUSTRIAL HOSES GATES FLEXIMAK INDUSTRIAL CATALOGUE<br />
INDUSTRIAL HOSES<br />
GATES FLEXIMAK FLUID POWER CATALOGUE<br />
4<br />
OVERVIEW<br />
The range of <strong>Industrial</strong> hose from<br />
<strong>Gates</strong> <strong>Fleximak</strong> has been<br />
developed for optimum<br />
performance and best value,<br />
utilising <strong>Gates</strong> extensive<br />
manufacturing knowledge.<br />
With a long history of constant<br />
evaluation, testing and application,<br />
<strong>Gates</strong> <strong>Fleximak</strong> assures its<br />
customers that <strong>Industrial</strong> Hose<br />
supplied from <strong>Gates</strong> <strong>Fleximak</strong><br />
service centres are of the best<br />
quality and conforms to BS, ISO,<br />
DIN and European Norms where<br />
applicable.<br />
All industrial hose from <strong>Gates</strong><br />
<strong>Fleximak</strong> is:<br />
� stored in a dust free and airconditioned<br />
environment.<br />
� well within the age limit<br />
acceptable under European<br />
Norms<br />
� manufactured to specific<br />
application<br />
� totally compatible with the<br />
<strong>Fleximak</strong> end fitting program<br />
� available in varying lengths and<br />
sizes.<br />
HOSE SELECTION<br />
Application<br />
Hose selection is governed by<br />
various factors such as size or flow<br />
rate, maximum operating pressure,<br />
and type of media, operating<br />
temperature and possibly abrasion.<br />
Operating pressure<br />
<strong>Gates</strong> <strong>Fleximak</strong> supplied <strong>hoses</strong> are<br />
rated for continuous operation at the<br />
maximum operating design<br />
pressure.<br />
The operating pressure is normally<br />
one-third of the hose minimum burst<br />
pressure for standard industrial<br />
<strong>hoses</strong>.<br />
Chemical Resistance<br />
Compatibility of inner tube material<br />
can be checked against<br />
Compatibility Charts for basic<br />
guidance on selection.<br />
End Fittings<br />
A comprehensive range of industrial<br />
hose fittings are available from the<br />
<strong>Gates</strong> <strong>Fleximak</strong> program. Assembly,<br />
Test and Certification of <strong>hoses</strong> can<br />
also be provided.<br />
A N 1 S O 9 0 0 1 C E R T I F I E D C O M P A N Y<br />
THE WORLD’S The World’s MOST Most TRUSTED Trusted NAME Name IN In BELTS, Belts, HOSE, Hose, Hydraulics HYDRAULICS & Related & RELATED Services SERVICES<br />
Dubai (Al Dubai Ramoul • Jebel & Ali Al • Quoz) Sharjah • � Abu Jebel Dhabi Ali • � Doha Abu • Dammam Dhabi � Doha • Jubail � • Dammam Kuwait • Addis � Jubail Ababa � Kuwait
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
INDEX Bold <strong>Gates</strong> <strong>Fleximak</strong> PN Represents Standard Stock Holding<br />
Application <strong>Gates</strong> <strong>Fleximak</strong> PN Specifications Section<br />
Air & Multi-Purpose 14 Bar EPDM RAF200 Adapta Flex TM 4.2<br />
Air & Multi-Purpose 17 Bar Nitrile C RPF250 Premo Flex ® ) 4.3<br />
Air & Multi-Purpose 20 Bar Nitrile C RPF300 Premo Flex ® 4.3<br />
Air & Multi-Purpose, Lock-On 20 Bar RLO300 LOL Plus 4.4<br />
Air & Multi-Purpose, 35 Bar RTR500 Terminator ® 4.5<br />
Water Suction Delivery 10 Bar WSD150 Barracuda ® 4.6<br />
Super-Vac (to replace OSD150 ITR) RSV150 / RSV100 <strong>Gates</strong> Super-Vac 150 psi / 100psi 4.7<br />
Steam Hose 18 Bar R2A-xx SH-RED Steam Queen 232 MB 4.8<br />
Breathing Air Low Pressure 30 Bar RLPBA Diver-100 EN 250 N/L 4.9<br />
Divers’ Air Hose 1125psi (3/8 & ½”) RDIVER/ 33B Divers’ Air 33HB 4.10<br />
Air Drill – Wire Braid RAD500 <strong>Gates</strong> Air Drill 18MB 4.11<br />
Large Bore Marine & Oilfield Hose 4.12<br />
Water Suction Delivery 14 Bar WSD200 <strong>Gates</strong> <strong>Fleximak</strong> 4.13<br />
Water Delivery 40 Bar RWD600 <strong>Gates</strong> <strong>Fleximak</strong> 4.13<br />
Water Delivery 70 Bar RWD1000 <strong>Gates</strong> <strong>Fleximak</strong> 4.14<br />
Bulk Cement Delivery 10 Bar RDC150 <strong>Gates</strong> <strong>Fleximak</strong> 4.14<br />
Chemical Acid (EPDM) 16 Bar RCE235 <strong>Gates</strong> <strong>Fleximak</strong> 4.15<br />
Concrete Placement 80 Bar RCP1230 <strong>Gates</strong> <strong>Fleximak</strong> 4.15<br />
Mud Suction 10 Bar RMS150 <strong>Gates</strong> <strong>Fleximak</strong> 4.16<br />
Dock Loading BS1435 L15 RFD250 <strong>Gates</strong> <strong>Fleximak</strong> 4.16<br />
Dock Loading BS1435 S15 RDH250 <strong>Gates</strong> <strong>Fleximak</strong> 4.17<br />
Oilfield Multi-Purpose 15 Bar RGD220 <strong>Gates</strong> <strong>Fleximak</strong> 4.17<br />
Oilfield Multi-Purpose 10 Bar RGP150 <strong>Gates</strong> <strong>Fleximak</strong> 4.18<br />
Oilfield Multi-Purpose 20 Bar RGP300 <strong>Gates</strong> <strong>Fleximak</strong> 4.18<br />
Oil Delivery 40 Bar ROD600 <strong>Gates</strong> <strong>Fleximak</strong> 4.19<br />
Fire Deluge Hose 20 Bar RFW300 <strong>Gates</strong> <strong>Fleximak</strong> 4.19<br />
End Fittings HA Series 4.20<br />
End Fittings Selection Chart 4.21<br />
MATERIAL CODES<br />
Structure Materials Code Temp°C Applications<br />
Natural Rubber NR -20 to +80 Water, Air, Abrasives, Inert fluids, Foods (W)<br />
Synthetic Rubber SBR -40 to +90 Water, Air, Abrasives, Oil Mist Resistance<br />
Nitrile NBR -30 to +100 Standard Hydrocarbons up to 55% Aromatics<br />
Viton FKM -20 to +160 Chemical, Hydrocarbons, High Temperatures<br />
Hypalon CSM -20 to +130 Chemical, Acids, High Aromatics<br />
Ethylene Propylene EPDM -20 to +130 Some Acids, Caustics, Chemical, Steam<br />
Cross-linked Polyethylene XLPE -20 to +70 Some Acids, Chemical<br />
Chloroprene (Neoprene) CR -30 to +120 Hydrocarbons, Abrasion Resistant Covers<br />
Ultra High Molecular Weight PE UHMWPE -30 to +93 Hydrocarbons, Acids, Chemicals<br />
Polytetraflouroethylene (Teflon ®) PTFE -200to+260 Most Chemicals & Acids, High Temperature<br />
The Standard <strong>Industrial</strong> Hose range is used in conjunction with <strong>Industrial</strong> Hose Couplings using Stainless Steel Strapping, Bolt<br />
Clamp, and Hose Clips for attachment means. Fuel Hoses use Internal Swaged or Reusable Ends.<br />
These assemblies are designed for low-pressure applications where the following end fittings are commonly used. These<br />
coupling products can be found in Section 05 of this catalogue - <strong>Industrial</strong> Fittings:<br />
� Steel and Stainless Steel King Nipples (Combination Nipples)<br />
� Crow Foot Couplings (Universal or Air King Couplings)<br />
� Aluminium, Brass or Stainless Steel Cam and Groove Couplings (Camlock Couplings)<br />
� Boss Couplings<br />
� Steam Couplings etc.,<br />
� Holedall Internal Swage Couplings<br />
If assemblies are required to have pressure tests at 1.5 times the rated working pressure of the hose used, it is recommended<br />
that end fittings are attached by internal or externally swaged or both. These products can be found in Section 05 of this<br />
catalogue - Large Bore Marine and Oilfield Hoses.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
1
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application AIR & Multi-Purpose 14 BAR<br />
GATES ADAPTAFLEX<br />
RECOMMENDED FOR: Air & water applications requiring maximum flexibility in any industry, including mining, construction, agriculture,<br />
vehicle repair and in-plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute<br />
solutions of herbicides.<br />
MAXIMUM WORKING PRESSURE: 200 psi and 250 psi see table below. Safety Factor 3:1<br />
TEMPERATURE RANGE: -40 O C to +93 O C (-40 O F to +200 O F) continuous service.<br />
CONSTRUCTION: Tube: Type P (EPDM). Black.<br />
Reinforcement: Synthetic, high tensile textile cord.<br />
Cover: Type P (EPDM). Black. All sizes through ½” are perforated.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue). <strong>Gates</strong> Power Crimp / <strong>Gates</strong> GLX.<br />
BRANDING: Continuous ink brand. Example: ‘GATES’ ADAPTA FLEX MULTI-PURPOSE 3/8 INCH (9.5mm) 200 PSI (1.72MPa) WP<br />
MADE IN USA”<br />
STANDARDS: Tube: RMA (Class C) Limited Oil Resistance<br />
Cover: RMA (Class C) Limited Oil Resistance<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RAF200-04<br />
RAF200-06<br />
RAF200-08<br />
RAF200-10<br />
RAF200-12<br />
RAF200-16<br />
-04<br />
-06<br />
-08<br />
-10<br />
-12<br />
-16<br />
¼”<br />
3/8”<br />
½”<br />
5/8”<br />
¾”<br />
1”<br />
6.4<br />
9.5<br />
12.7<br />
15.9<br />
16.1<br />
25.4<br />
0.50<br />
0.66<br />
0.81<br />
0.97<br />
1.11<br />
1.40<br />
12.7<br />
16.8<br />
20.6<br />
24.6<br />
28.2<br />
35.6<br />
200<br />
200<br />
200<br />
200<br />
200<br />
200<br />
13.8<br />
13.8<br />
13.8<br />
13.8<br />
13.8<br />
13.8<br />
30.0<br />
30.0<br />
25.0<br />
20.0<br />
15.0<br />
10.0<br />
762<br />
762<br />
635<br />
508<br />
381<br />
254<br />
3.0<br />
3.0<br />
5.0<br />
6.0<br />
6.0<br />
7.9<br />
76<br />
76<br />
127<br />
152<br />
152<br />
203<br />
0.09<br />
0.14<br />
0.19<br />
0.26<br />
0.32<br />
0.45<br />
0.04<br />
0.06<br />
0.09<br />
0.12<br />
0.15<br />
0.20<br />
3204-1401<br />
3204-1407<br />
3204-1413<br />
3204-1419<br />
3204-1422<br />
3204-1431<br />
RAF250-20 -20 1-1/4” 31.8 1.73 43.9 250 17.2 10.0 254 10.0 254 0.68 0.31 3204-1434<br />
RAF250-24 -24 1-1/2” 38.1 1.98 50.3 250 17.2 10.0 254 12.0 305 0.79 0.36 3204-1437<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
2
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application AIR & Multi-Purpose 17 & 22 BAR<br />
GATES PREMO FLEX<br />
RECOMMENDED FOR: Application requiring a premium grade spiral hose with excellent flexibility and maximum resistance to air, water,<br />
petroleum oils and lubricating oils (to 212 O F). Recommended for gasoline, kerosene and fuel oil transfer only (to 120 O F). Excellent weather<br />
and ozone resistance. Suitable for application where oily & greasy external environment like workshop, barges and wash bays. Non<br />
conductive @1000V DC (>1 MEGOHM/IN.)<br />
MAXIMUM WORKING PRESSURE: 250 psi and 300 psi see table below. Safety Factor 4:1. Largest Sizes are 3.6:1<br />
TEMPERATURE RANGE: -40 O C to +100 O C (-40 O F to +212 O F) continuous service.<br />
CONSTRUCTION: Tube: Type C (Nitrile). Black<br />
Reinforcement: Synthetic, high tensile textile cord.<br />
Cover: Type C2 (Modified Nitrile). Red.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue). <strong>Gates</strong> Power Crimp / <strong>Gates</strong> GLX.<br />
BRANDING: Continuous ink brand. Example: ‘GATES’ PREMO FLEX MULTI-PURPOSE 3/8 INCH (9.5mm) 250 PSI (1.72MPa) WP<br />
NONCONDUCTIVE @1000V DC(>1 MEGOHM/IN.) MADE IN USA”<br />
STANDARDS: Tube: RMA (Class A) High Oil Resistance<br />
Cover: RMA (Class B) Medium Oil Resistance<br />
Non conductive at 1000 volts D.C. Electrical resistance is greater than one megohm per inch when subjected to 1000 volts<br />
D.C. Storage and use may adversely affect electrical properties.<br />
Mil-H-2815G Section 3.12.2 off-gassing for breathing applications such as supplied by air respirators, for sizes 3/16” through 3/8”, ¾” and 1”<br />
Specifications: 250psi<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RPF250-03 -03 3/16” 4.8 0.45 11.2 250 17.2 30.0 762 2.0 51 0.07 0.03 3205-0010<br />
RPF250-04 -04 ¼” 6.4 0.50 12.7 250 17.2 30.0 762 2.0 51 0.09 0.04 3205-0015<br />
RPF250-05<br />
RPF250-06<br />
RPF250-08<br />
RPF250-10<br />
RPF250-12<br />
RPF250-16<br />
-05<br />
-06<br />
-08<br />
-10<br />
-12<br />
-16<br />
5/16”<br />
3/8”<br />
½”<br />
5/8”<br />
¾”<br />
1”<br />
7.9<br />
9.5<br />
12.7<br />
15.9<br />
19.1<br />
25.4<br />
0.56<br />
0.66<br />
0.85<br />
0.98<br />
1.15<br />
1.47<br />
14.2<br />
16.8<br />
21.6<br />
24.9<br />
29.2<br />
37.3<br />
250<br />
250<br />
250<br />
250<br />
250<br />
250<br />
17.2<br />
17.2<br />
17.2<br />
17.2<br />
17.2<br />
17.2<br />
30.0<br />
30.0<br />
25.0<br />
20.0<br />
20.0<br />
10.0<br />
762<br />
762<br />
635<br />
508<br />
508<br />
254<br />
2.0<br />
3.0<br />
4.0<br />
5.0<br />
5.0<br />
7.9<br />
51<br />
76<br />
102<br />
127<br />
127<br />
203<br />
0.10<br />
0.14<br />
0.22<br />
0.27<br />
0.36<br />
0.54<br />
0.05<br />
0.06<br />
0.10<br />
0.12<br />
0.16<br />
0.25<br />
3205-0020<br />
3205-0025<br />
3205-0030<br />
3205-0035<br />
3205-5040<br />
3205-0046<br />
RPF250-20 -20 1-1/4” 31.8 1.75 44.5 250 17.2 10.0 254 10.0 254 0.67 0.30 3205-0049<br />
RPF250-24 -24 1-1/2” 38.1 2.00 50.8 250 17.2 10.0 254 12.0 305 0.78 0.35 3205-0055<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered. Only items in bold fonts are regular stock items.<br />
Specifications: 300psi<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RPF300-04<br />
RPF300-05<br />
RPF300-06<br />
RPF300-08<br />
RPF300-10<br />
RPF300-12<br />
-04<br />
-05<br />
-06<br />
-08<br />
-10<br />
-12<br />
¼”<br />
5/16”<br />
3/8”<br />
½”<br />
5/8”<br />
¾”<br />
6.4<br />
7.9<br />
9.5<br />
12.7<br />
15.9<br />
19.1<br />
0.57<br />
0.67<br />
0.73<br />
0.88<br />
0.98<br />
1.19<br />
14.5<br />
17.0<br />
18.5<br />
22.4<br />
24.9<br />
30.2<br />
315<br />
315<br />
315<br />
315<br />
315<br />
315<br />
21.7<br />
21.7<br />
21.7<br />
21.7<br />
21.7<br />
21.7<br />
30.0<br />
30.0<br />
30.0<br />
25.0<br />
20.0<br />
20.0<br />
762<br />
762<br />
762<br />
635<br />
508<br />
508<br />
2.0<br />
2.0<br />
3.0<br />
4.0<br />
5.0<br />
5.0<br />
51<br />
51<br />
76<br />
102<br />
127<br />
127<br />
0.12<br />
0.16<br />
0.18<br />
0.24<br />
0.27<br />
0.40<br />
0.05<br />
0.07<br />
0.08<br />
0.11<br />
0.12<br />
0.18<br />
3205-0016<br />
3205-0021<br />
3205-0026<br />
3205-0031<br />
3205-0036<br />
3205-5041<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
3
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application AIR & Multi-Purpose Lock on 20 BAR<br />
GATES LOL PLUS<br />
RECOMMENDED FOR: Petroleum-base hydraulic oils, water, glycol, antifreeze solutions, hot lubricating oils and air.<br />
NOTE: Lock-on hose and couplings are not recommended for pressure surge applications or critical<br />
applications, such as permanent piping in residential or commercial buildings. Not recommended for<br />
gasoline or diesel fuels.<br />
MAXIMUM WORKING PRESSURE: 300 psi see table below. Safety Factor 4:1<br />
TEMPERATURE RANGE: -40 O C to +100 O C (-40 O F to +212 O F) normal service. For air: +71 O C (160 O F) only. For water emulsions, see<br />
Hydraulic hose section 1.<br />
CONSTRUCTION: Tube: Type C (Nitrile). Black<br />
Reinforcement: Synthetic, high tensile textile cord.<br />
Cover: Type A (Neoprene). Black.<br />
Type C2 (Modified Nitrile). Blue, Red, Yellow, Green and Gray<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue). <strong>Gates</strong> Lock on Couplings / <strong>Gates</strong> GLX.<br />
BRANDING: Continuous ink brand. Example: “GATES’ LOL PLUS 12LOLA+3/4 INCH 300 PSI WP FLAME RESISTANT COVER MADE IN<br />
USA”<br />
STANDARDS: Tube: RMA (Class A) Medium Oil Resistance<br />
Cover: RMA (Class B) Medium Oil Resistance. Flame-resistant<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
LOL-04<br />
LOL-06<br />
LOL-08<br />
LOL-10<br />
LOL-12<br />
-04<br />
-06<br />
-08<br />
-10<br />
-12<br />
¼”<br />
3/8”<br />
½”<br />
5/8”<br />
¾”<br />
6.4<br />
9.5<br />
12.7<br />
15.9<br />
19.1<br />
0.47<br />
0.63<br />
0.77<br />
0.94<br />
1.06<br />
11.9<br />
15.9<br />
19.6<br />
23.9<br />
26.9<br />
300<br />
300<br />
300<br />
300<br />
300<br />
20.7<br />
20.7<br />
20.7<br />
20.7<br />
20.7<br />
27.9<br />
27.9<br />
27.9<br />
27.9<br />
15.0<br />
711<br />
711<br />
711<br />
711<br />
381<br />
3.0<br />
3.0<br />
5.0<br />
6.0<br />
7.0<br />
76<br />
76<br />
127<br />
152<br />
178<br />
0.09<br />
0.11<br />
0.15<br />
0.20<br />
0.24<br />
0.04<br />
0.05<br />
0.07<br />
0.09<br />
0.11<br />
3201-1100<br />
3201-1101<br />
3201-1102<br />
3201-1103<br />
3201-1104<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
Lock-on hose with Black outer cover is ex-stock for other colours please contact <strong>Gates</strong> <strong>Fleximak</strong>.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
4
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application AIR & Multi-Purpose 35 BAR<br />
GATES TERMINATOR<br />
RECOMMENDED FOR: Application requiring a premium quality, multi-purpose hose with superior abrasion resistance for air, oil and some<br />
chemical applications. Excellent durability for extra long life in these applications: mining, air drill, construction,<br />
poultry plants and other service. Excellent weather and ozone resistance.<br />
MAXIMUM WORKING PRESSURE: 501 psi see table below. Safety Factor 4:1<br />
TEMPERATURE RANGE: -40 O C to +100 O C (-40 O F to +212 O F) continuous service.<br />
CONSTRUCTION: Tube: Type C (Nitrile). Black<br />
Reinforcement: Synthetic, high tensile textile cord.<br />
Cover: Type C4 (Carboxylated Nitrile). Yellow.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue). <strong>Gates</strong> Power Crimp / Mega Crimp / <strong>Gates</strong> GLX.<br />
BRANDING: Continuous ink brand. Example: ‘GATES ® ’ TERMINATOR ® ’ 501PSI (3.45Mpa) WP ¾ INCH (19.1mm) FLAME RESISTANT<br />
MSHA 2G-IC-11C MADE IN USA”<br />
STANDARDS: Tube: RMA (Class A) High Oil Resistance<br />
Cover: RMA (Class A) High Oil Resistance. Meets MSHA 30CFR 16.65. Flame-resistant.<br />
All sizes except 1-1/2” and 2” are non-conductive at 1000 volts D.C. Electrical resistance is greater than one mega ohm<br />
per inch when subjected to 1000 volts D.C. Storage and use may adversely affect electrical properties.<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RTR500-04<br />
RTR500-06<br />
RTR500-08<br />
RTR500-12<br />
RTR500-16<br />
RTR500-20<br />
RTR500-24<br />
-04<br />
-06<br />
-08<br />
-12<br />
-16<br />
-20<br />
-24<br />
¼”<br />
3/8”<br />
½”<br />
¾”<br />
1”<br />
1-1/4”<br />
1-1/2”<br />
6.4<br />
9.5<br />
12.7<br />
19.1<br />
25.4<br />
31.8<br />
38.1<br />
0.57<br />
0.75<br />
0.89<br />
1.22<br />
1.51<br />
1.78<br />
2.09<br />
14.5<br />
19.1<br />
22.6<br />
31.0<br />
38.4<br />
45.2<br />
53.1<br />
501<br />
501<br />
501<br />
501<br />
501<br />
501<br />
501<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
30.0<br />
25.0<br />
25.0<br />
15.0<br />
10.0<br />
10.0<br />
10.0<br />
762<br />
635<br />
635<br />
381<br />
254<br />
254<br />
254<br />
3.0<br />
3.0<br />
5.0<br />
6.0<br />
7.9<br />
10.0<br />
12.0<br />
76<br />
76<br />
127<br />
152<br />
203<br />
254<br />
305<br />
0.12<br />
0.19<br />
0.25<br />
0.42<br />
0.57<br />
0.73<br />
0.96<br />
0.05<br />
0.09<br />
0.11<br />
0.19<br />
0.26<br />
0.33<br />
0.44<br />
3202-0001<br />
3202-0006<br />
3202-0011<br />
3202-0016<br />
3202-0021<br />
3202-0027<br />
3202-0029<br />
RTR500-32 -32 2” 50.8 2.64 67.1 501 34.5 10.0 254 14.0 356 1.35 0.61 3202-0032<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
5
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application Water Suction Delivery 10 BAR<br />
GATES BARRACUDA<br />
RECOMMENDED FOR: Medium to light duty water suction / discharge for agricultural, construction and industrial applications. EPDM tube<br />
designed to handle a variety of liquids including Lasso, Lasso II, and Freedom. Recommended for sanitation lines<br />
in marine applications.<br />
MAXIMUM WORKING PRESSURE: 100 psi and 150 psi see table below. Safety Factor 3:1<br />
TEMPERATURE RANGE: -40 O C to +82 O C (-40 O F to +180 O F) For 1” through 6” sizes.<br />
-36 O C to +93 O C (-32 O F to +200 O F) For 8” through 12” sizes.<br />
CONSTRUCTION: Tube: Type P (EPDM). Black<br />
Reinforcement: Synthetic, high tensile textile with steel wire helix.<br />
Cover: Type B2 (Specially compounded elastomer for ozone and abrasion resistance). Black with green spiral stripe.<br />
For sizes 1” through 6”<br />
Type P (EPDM). Black with green spiral stripe. For sizes 8”, 10” and 12” only.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue).<br />
BRANDING: Continuous transfer label. Example: ‘GATES ® ’ Barracuda ® ’ Water Suction/Discharge 150 PSI (1.03MPa) WP MADE IN USA”<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
WSD150-16 -16 1” 25.4 1.33 33.8 150 1.03 30.0 762 5.0 127 0.39 0.18 4686-0199<br />
WSD150-20 -20 1-1/4” 31.8 1.61 40.9 150 1.03 30.0 762 5.0 127 0.51 0.23 4686-0203<br />
WSD150-24 -24 1-1/2” 38.1 1.86 47.2 150 1.03 30.0 762 6.0 152 0.60 0.27 4686-0237<br />
WSD150-32 -32 2” 50.8 2.36 59.9 150 1.03 30.0 762 8.0 203 0.76 0.35 4686-0235<br />
WSD150-40 -40 2-1/2” 63.5 2.96 75.2 150 1.03 30.0 762 10.0 254 1.06 0.48 4686-0205<br />
WSD150-48 -48 3” 76.2 3.54 89.9 150 1.03 30.0 762 14.0 356 1.74 0.79 4686-0236<br />
WSD150-64 -64 4” 101.6 4.54 115.3 150 1.03 30.0 762 18.0 457 2.25 1.02 4686-0208<br />
WSD150-96 -96 6” 152.0 6.68 170.0 100 0.69 30.0 762 28.0 711 3.94 1.79 4686-0234<br />
WSD150-128 -128 8” 203.2 9.00 228.6 100 0.69 30.0 762 40.0 1016 8.81 4.00 4686-0209<br />
WSD150-160 -160 10” 254.0 11.27 286.3 100 0.69 30.0 762 50.0 1270 15.80 7.17 4686-0210<br />
WSD150-192 -192 12” 304.8 13.27 337.1 100 0.69 30.0 762 60.0 1524 18.63 8.45 4686-0211<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
6
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application Oil Suction & Delivery 10 BAR<br />
GATES SUPERVAC ®<br />
RECOMMENDED FOR: Tank truck service, including oil field vacuum truck, where full suction or rated working pressure are required.<br />
Ideal for applications handling crude oil, salt and fresh water, tank bottoms, drilling mud, dilute solutions of<br />
hydrochloric acids, diesel fuels and sewage transfer. Ref: Chemical Resistance Chart in Section 19.<br />
NOTE: NOT RECOMMENDED FOR REFINED PERTROLEUM PRODUCTS SUCH AS GASOLINE.<br />
MAXIMUM WORKING PRESSURE: 150 psi to 60 psi see table below. Safety Factor 4:1<br />
TEMPERATURE RANGE: -40 O C to +150 O C (-40 O F to +66 O F) continuous service. Note: Diesel fuel normally conveyed below 120 O F<br />
(+49 O C)<br />
CONSTRUCTION: Tube: Type C (Nitrile). Black<br />
Reinforcement: Synthetic, high tensile textile with steel wire helix.<br />
Cover: Type D (SBR). Black corrugated with blue spiral stripe.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue).<br />
BRANDING: Continuous transfer label. Example: ‘GATES ® ’ Super-Vac ® ’ Oil Field Vacuum 150 PSI (1.03MPa) WP. MADE IN USA”<br />
STANDARDS: Tube: RMA (Class B) Medium Oil Resistance<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
OSD150-16<br />
OSD150-20<br />
OSD150-24<br />
OSD150-32<br />
OSD150-40<br />
OSD150-48<br />
OSD150-64<br />
OSD150-96<br />
-16<br />
-20<br />
-24<br />
-32<br />
-40<br />
-48<br />
-64<br />
-96<br />
1”<br />
1-1/4”<br />
1-1/2”<br />
2”<br />
2-1/2”<br />
3”<br />
4”<br />
6”<br />
25.4<br />
31.8<br />
38.1<br />
50.8<br />
63.5<br />
76.2<br />
101.6<br />
152.4<br />
1.42<br />
1.68<br />
1.97<br />
2.47<br />
2.99<br />
3.52<br />
4.52<br />
6.67<br />
36.1<br />
42.7<br />
50.0<br />
62.7<br />
75.9<br />
89.4<br />
114.8<br />
169.4<br />
150<br />
150<br />
150<br />
150<br />
150<br />
150<br />
100<br />
60<br />
1.03<br />
1.03<br />
1.03<br />
1.03<br />
1.03<br />
1.03<br />
0.69<br />
0.41<br />
30.0<br />
30.0<br />
30.0<br />
30.0<br />
30.0<br />
30.0<br />
30.0<br />
30.0<br />
762<br />
762<br />
762<br />
762<br />
762<br />
762<br />
762<br />
762<br />
3.0<br />
3.0<br />
3.0<br />
4.0<br />
5.0<br />
6.0<br />
8.0<br />
18.0<br />
127<br />
127<br />
152<br />
203<br />
254<br />
356<br />
457<br />
711<br />
0.52<br />
0.67<br />
0.77<br />
0.99<br />
1.46<br />
1.76<br />
2.29<br />
4.37<br />
0.24<br />
0.30<br />
0.35<br />
0.45<br />
0.66<br />
0.80<br />
1.04<br />
1.98<br />
4688-0651<br />
4688-0653<br />
4688-0656<br />
4688-0668<br />
4688-0675<br />
4688-0680<br />
4688-0690<br />
4688-0702<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
7
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application Steam Hose 18 BAR<br />
GATES STEAM QUEEN ® 232MB (RED COVER)<br />
RECOMMENDED FOR: All types of stream – saturated and superheated – up to 250 PSI +450 O F (+232 O C)<br />
MAXIMUM WORKING PRESSURE: 250 psi see table below. Safety Factor 10:1<br />
TEMPERATURE RANGE: -40 O C to +232 O C (-40 O F to 450 O F) continuous service.<br />
CONSTRUCTION: Tube: Type P2 EPDM. Black<br />
Reinforcement: Braided, high tensile steel wire.<br />
Cover: Type B1 (Special compound designed to withstand heat and oil). Red. All sizes are perforated.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue).<br />
BRANDING: Continuous molded brand. Example: ‘GATES ® ’ 232MB STEAM QUEEN ® ’ ¾ INCH 2 WIRE BRAID 250 PSI WP AT 450<br />
DEGREES F MADE IN USA. CAUTION: TIGHTEN CLAMPS BEFORE USING”<br />
STANDARDS: Tube: RMA (Class C) Limited Oil Resistance.<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong> Part<br />
No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong><br />
Part No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
R2A-06SH-RED<br />
R2A-08SH-RED<br />
R2A-12SH-RED<br />
R2A-16SH-RED<br />
R2A-24SH-RED<br />
R2A-32SH-RED<br />
-06<br />
-08<br />
-12<br />
-16<br />
-24<br />
-32<br />
3/8”<br />
½”<br />
¾”<br />
1”<br />
1-1/2”<br />
2”<br />
9.5<br />
12.7<br />
19.1<br />
25.4<br />
38.1<br />
50.8<br />
0.80<br />
1.02<br />
1.27<br />
1.52<br />
2.18<br />
2.66<br />
20.3<br />
25.9<br />
32.3<br />
38.6<br />
55.4<br />
67.6<br />
250<br />
250<br />
250<br />
250<br />
250<br />
250<br />
17.2<br />
17.2<br />
17.2<br />
17.2<br />
17.2<br />
17.2<br />
30.0<br />
25.0<br />
20.0<br />
20.0<br />
10.0<br />
10.0<br />
762<br />
635<br />
508<br />
508<br />
254<br />
254<br />
4.0<br />
7.0<br />
9.0<br />
11.0<br />
20.0<br />
25.0<br />
102<br />
178<br />
229<br />
279<br />
508<br />
635<br />
0.30<br />
0.45<br />
0.60<br />
0.73<br />
1.24<br />
1.64<br />
0.14<br />
0.20<br />
0.27<br />
0.33<br />
0.56<br />
0.74<br />
3602-1061<br />
3602-1062<br />
3602-1065<br />
3602-1057<br />
3602-1059<br />
3602-1060<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
8
CAT No. 08.08 Section 04.<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application RLPBA 35 BAR<br />
GATES RLPBA<br />
RECOMMENDED FOR: Suitable for personal air breathing purposes. Hose according to UNI EN 250 (paragraph 5.7), it is specially<br />
designed and manufactured for air supplying in scuba diving systems<br />
MAXIMUM WORKING PRESSURE: 510 psi see table below. Safety Factor 4:1<br />
TEMPERATURE RANGE: -30 O C to +70 O C (-22 O F to 158 O F) continuous service.<br />
CONSTRUCTION: Tube: EPDM. Black<br />
Reinforcement: Synthetic, high tensile textile cord.<br />
Cover: EPDM. Black. Perforated.<br />
COUPLINGS: Corrosion resistant couplings supplied and applied by diving contractors.<br />
BRANDING: Continuous ink print label. Example: “GATES ® ’ RLPBA-04 BREATHING AIR HOSE 35 BAR WP MADE IN USA”<br />
STANDARDS: Meets DIVER 100 EN250 N/L standard requirements for breathing air hose.<br />
Do Not Exceed 510 Psi (35 Bar) – Higher Psi (Bar) May Cause Damage Or Personal Injury<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RLPBA-04 -04 ¼” 6.4 0.59 15.1 510 35 30.0 762 2.35 60 0.18 0.09 4218-1118<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait<br />
9
CAT No. 08.08 Section 04. 10<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application Divers’ Air 78 BAR<br />
GATES DIVERS’ AIR 33 HB<br />
RECOMMENDED FOR: Handling mixtures of oxygen, helium and nitrogen gases customarily used in diving applications as air breathing<br />
hose. The kink resistance hose is designed for extra long wear under normal operating use.<br />
MAXIMUM WORKING PRESSURE: 1000 psi and 1125 psi see table below. Safety Factor 4:1<br />
TEMPERATURE RANGE: -40 O C to +49 O C (-40 O F to 120 O F) continuous service.<br />
CONSTRUCTION: Tube: Type C (Nitrile). Black<br />
Reinforcement: Synthetic, high tensile textile cord.<br />
Cover: Type A (Neoprene). Black. All sizes are perforated.<br />
COUPLINGS: Corrosion resistant couplings supplied and applied by diving contractors.<br />
BRANDING: Continuous ink print label. Example: ‘GATES ® ’ 33HB DIVERS’ AIR 3/8 INCH (9.5mm) MADE IN USA”<br />
STANDARDS: Meets MIL-H-2815G Section 3.12.2 off-gassing for air breathing applications, especially diving.<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RDIVER-06<br />
RDIVER-08<br />
-06<br />
-08<br />
3/8”<br />
½”<br />
9.5<br />
12.7<br />
0.75<br />
0.94<br />
19.1<br />
23.9<br />
1125<br />
1000<br />
77.6<br />
69.0<br />
30.0<br />
30.0<br />
762<br />
762<br />
4.0<br />
5.0<br />
102<br />
127<br />
0.19<br />
0.29<br />
0.09<br />
0.13<br />
3333-0017<br />
3333-0035<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 11<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application Air Drill 35 BAR<br />
GATES AIR DRILL 18 MB<br />
RECOMMENDED FOR: Extra heavy duty, high pressure use on industrial, construction and pneumatic mining applications requiring wire<br />
braided hose with an oil resistant tube and abrasion resistant cover.<br />
MAXIMUM WORKING PRESSURE: 500 psi see table below. Safety Factor 4:1<br />
TEMPERATURE RANGE: -30 O C to +100 O C (-34 O F to 212 O F) continuous service.<br />
CONSTRUCTION: Tube: Type A (Neoprene). Black<br />
Reinforcement: Braided, high tensile steel wire.<br />
Cover: Type C2 (Modified Nitrile). Gray with yellow stripe. All sizes are perforated. For ¾” through 1-1/4” sizes only.<br />
Type D3 (Natural Rubber). Gray with yellow stripe. All sizes are perforated. For ¾” through 4” sizes only.<br />
COUPLINGS: <strong>Industrial</strong> Hose Couplings (Refer: Section 05 of this catalogue).<br />
BRANDING: Continuous transfer label. Example: “GATES ® ’ 18MB PREMIUM AIR DRILL 500PSI (3.45MPa) WP MADE IN USA”<br />
STANDARDS: Tube: RMA (Class B) Medium Oil Resistance<br />
Specifications:<br />
<strong>Gates</strong><br />
<strong>Fleximak</strong><br />
Part No<br />
Hose<br />
Dash<br />
Size<br />
Nominal ID Nominal OD Max W.P. Suction Min Bend Wt. Per Ft.<br />
<strong>Gates</strong> Part<br />
No.<br />
Inch mm Inch mm psi Bar In. mm Inch mm Lbs Kg<br />
Hg Hg<br />
RAD500-12<br />
RAD500-16<br />
RAD500-20<br />
RAD500-24<br />
RAD500-32<br />
RAD500-40<br />
RAD500-48<br />
RAD500-64<br />
-12<br />
-16<br />
-20<br />
-24<br />
-32<br />
-40<br />
-48<br />
-64<br />
¾”<br />
1”<br />
1-1/4”<br />
1-1/2”<br />
2”<br />
2-1/2”<br />
3”<br />
4”<br />
19.1<br />
25.4<br />
31.8<br />
38.1<br />
50.8<br />
63.5<br />
76.2<br />
101.6<br />
1.28<br />
1.55<br />
1.80<br />
2.21<br />
277<br />
3.46<br />
3.97<br />
5.06<br />
32.5<br />
39.4<br />
45.7<br />
56.1<br />
70.4<br />
87.9<br />
100.8<br />
128.5<br />
500<br />
500<br />
500<br />
500<br />
500<br />
500<br />
500<br />
500<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
34.5<br />
25.0<br />
25.0<br />
15.0<br />
15.0<br />
15.0<br />
10.0<br />
10.0<br />
10.0<br />
635<br />
635<br />
381<br />
381<br />
381<br />
254<br />
254<br />
254<br />
6.0<br />
8.0<br />
10.0<br />
12.0<br />
14.0<br />
30.0<br />
36.0<br />
47.6<br />
152<br />
203<br />
254<br />
305<br />
356<br />
762<br />
914<br />
1219<br />
0.60<br />
0.80<br />
0.95<br />
1.26<br />
1.99<br />
3.04<br />
3.69<br />
5.77<br />
0.27<br />
0.36<br />
0.43<br />
0.57<br />
0.90<br />
1.38<br />
1.67<br />
2.62<br />
3618-0011<br />
3618-0021<br />
3618-0031<br />
3618-0041<br />
3618-0051<br />
3618-0205<br />
3618-0215<br />
3618-0225<br />
Note: <strong>Gates</strong> Part No. may change based on the packaging specs and quantity ordered.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 12<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Large Bore Marine & Oilfield Hose<br />
<strong>Gates</strong> <strong>Fleximak</strong> carries a wide range of <strong>large</strong> <strong>bore</strong> marine and oilfield hose for different<br />
applications like Water Suction Delivery, Bulk Cement handling, Concrete Placement, Mud<br />
Suction, Dock Loading, Oil suction & delivery and Oil Field Multi-Purpose hose. These <strong>hoses</strong><br />
are custom built and available in sizes ranging from 4 Inch to 12 Inch ID with different end<br />
connections.<br />
TOLERANCES<br />
Outside ∅ Range (mm) Tolerance (mm)<br />
All sizes Within ISO 1307/92<br />
13-51 ±1.50<br />
52-63 ±1.75<br />
64-76 ±2.00<br />
77-102 ±2.35<br />
103-152 ±2.50<br />
154-203 ±2.75<br />
204-254 ±3.00<br />
255-355 ±3.25<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 13<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application WATER SUCTION / DELIVERY 14 BAR<br />
TYPE Water Suction & Delivery WSD (Sizes -32 to –128)<br />
Part No. WSD200 - (size code)<br />
END Fittings <strong>Industrial</strong> Inserts and Clamps or Swaged Holedall Ends<br />
Maximum WP 14 Bar (200 PSI) 4:1 Safety Factor<br />
Temperature -40°C to +90°C (-40 to +200°F)<br />
Branding <strong>Gates</strong> FLEXIMAK WSD200 - Water Suction - Discharge WP 14 Bar<br />
Structure SBR smooth black inner tube - Textile reinforcement - Wire Helix - SBR black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
WSD200-32 2” (51) (66) 1.70 40 280<br />
WSD200-40 2½” (63) (79) 2.77 40 350<br />
WSD200-48 3” (76) (93) 3.42 40 440<br />
WSD200-64 4” (102) (121) 4.78 40 600<br />
WSD200-96 6” (152) (171) 9.10 30 1060<br />
WSD200-128 8” (203) (225) 13.50 30 1600<br />
Twin High Tensile Wire Helix (BS 3592 Part 2)<br />
Application WATER DELIVERY 40 BAR<br />
TYPE Water Delivery (Sizes -48 to -96)<br />
Part No. RWD600 - (size code)<br />
END Fittings Swaged Holedall Ends only<br />
Maximum WP 40 Bar (600 PSI) 4:1 Safety Factor<br />
Temperature -40°C to +90°C (-40 to +200°F)<br />
Branding <strong>Gates</strong> FLEXIMAK RWD600 - HP Water Discharge - WP 40 Bar<br />
Structure SBR smooth black inner tube - Textile reinforcement - SBR smooth black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
RWD600-48 3” (76) (98) 4.37 40<br />
RWD600-64 4” (102) (129) 7.80 40<br />
RWD600-96 6” (152) (179) 9.68 30<br />
Min Bend<br />
Radius mm<br />
Specially designed for HP Pipeline Testing<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 14<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application WATER DELIVERY 70 BAR<br />
TYPE Water Delivery (Sizes -48 to -64)<br />
Part No. RWD1000 - (size code)<br />
END Fittings Swaged Holedall Ends only (Welded on Ferrule)<br />
Maximum WP 70 Bar (1000 PSI) 4:1 Safety Factor<br />
Temperature -40°C to +90°C (-40 to +200°F)<br />
Branding <strong>Gates</strong> FLEXIMAK RWD1000 - HP Water Discharge - WP 70 Bar<br />
Structure SBR smooth black inner tube - Textile reinforcement - SBR smooth black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong> ID∅ OD∅ Weight Roll (L)<br />
PN<br />
Inch (mm) (mm) Kg/Mtr Mtr<br />
RWD1000-48 3” (76) (103) 4.37 40<br />
RWD1000-64 4” (102) (131) 7.80 40<br />
Min Bend<br />
Radius mm<br />
Specially designed for HP Pipeline Testing and Water<br />
Injection Applications<br />
Application BULK CEMENT DELIVERY 10 BAR<br />
TYPE Bulk Cement Delivery (Sizes -48 to -80)<br />
Part No. RDC150 - (size code)<br />
END Fittings <strong>Industrial</strong> Couplings and Clamps or Swaged Holedall Ends<br />
Maximum WP 10 Bar (150 PSI) 3:1 Safety Factor<br />
Temperature -20°C to +90°C (-4 to +194°F)<br />
Branding GATES FLEXIMAK RDC150 - Dry Bulk Cement WP 10 Bar<br />
Structure NR/SBR Inner tube (Polymer base) - Textile reinforcement - 596 Compound black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RDC150-48 3” (76) (98) 3.76 40 610<br />
RDC150-64 4” (102) (124) 4.87 40 820<br />
RDC150-80 5” (127) (151) 6.67 40 1020<br />
Electrically continuous for static conduction<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 15<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application EPDM ACID SUCTION / DELIVERY 16 BAR<br />
TYPE EPDM ACID SUCTION & DELIVERY (Sizes -16 to -64)<br />
Part No. RCE235 - (size code)<br />
END Fittings PP or PP Coated <strong>Industrial</strong> Inserts and Clamps or Swaged Ends<br />
Maximum WP 16 Bar (235 PSI) 4:1 Safety Factor<br />
Temperature -20°C to +130°C (-4 to +266°F)<br />
Branding GATES FLEXIMAK RCE235 - EPDM Chemical - Acid WP 16 Bar WT +130°C<br />
Structure EPDM Inner tube - Textile reinforcement - Wire Helix - EPDM yellow cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RCE235-16 1” (25) (39) 1.15 40 160<br />
RCE235-32 2” (51) (65) 1.96 40 200<br />
RCE235-48 3” (76) (93) 3.77 40 335<br />
RCE235-64 4” (102) (121) 5.82 40 450<br />
Twin High Tensile Wire Helix (BS 3592 Part 2)<br />
Please check compatibility chart for chemical resistance<br />
Application HP CONCRETE PUMP HOSE 80 BAR<br />
TYPE HP Concrete Pump Hose (Sizes -48 to -80)<br />
Part No. RCP1230 - (size code)<br />
END Fittings Swaged Holedall Grooved Stem Ends only (Welded on Ferrule)<br />
Maximum WP 80 Bar (1230 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +90°C (-22 to +194°F)<br />
Branding GATES FLEXIMAK RCP1230 - Concrete Placement WP 85 Bar<br />
Structure NR Inner tube - Multiple polyester cord - NR black cover high abrasion resistance<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
No. of Plies<br />
RCP1230-48 3” (76) (101) 4.37 40 6<br />
RCP1230-64 4” (102) (132) 7.80 40 8<br />
RCP1230-80 5” (127) (162) 11.50 40 10<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 16<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application MUD SUCTION 10 BAR<br />
TYPE Mud Suction (Sizes -96 to -192)<br />
Part No. RMS150 - (size code)<br />
END Fittings <strong>Industrial</strong> Inserts and Clamps or Swaged Holedall Ends<br />
Maximum WP 10 Bar (150 PSI) 3:1 Safety Factor<br />
Temperature -12°C to +100°C (+10 to +212°F)<br />
Branding GATES FLEXIMAK RMS150 - Mud Pump Suction - WP 10 Bar<br />
Structure SBR Inner tube - Textile reinforcement - Wire Helix - SBR black cover (Max 15” Hg)<br />
<strong>Gates</strong> <strong>Fleximak</strong> ID∅ OD∅ Weight Roll (L) Min Bend<br />
PN<br />
Inch (mm) (mm) Kg/Mtr Mtr Radius mm<br />
RMS150-96 6” (152) (173) 9.10 40 1350<br />
RMS150-128 8” (203) (224) 13.15 30 1800<br />
RMS150-160 10” (254) (279) 19.86 12 2300<br />
RMS150-192 12” (305) (337) 27.65 12 3000<br />
Specially designed for Pump Connection (Suction Side)<br />
Application HD DOCK LOADING OIL/PETROL TRANSFER 15 BAR<br />
TYPE HD DOCK LOADING OIL/PETROL TRANSFER (Sizes -48 to -128)<br />
Part No. RFD250 - (size code)<br />
END Fittings Swaged Holedall Ends<br />
Maximum WP 15 Bar (220 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +100°C (-22 to +212°F)<br />
Branding GATES FLEXIMAK RFD250 - Marine Dock Bunkering - Discharge WP 15 Bar<br />
Structure NBR Inner tube - HT Polyester reinforcement - Electrical continuity - CR black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RFD250-48 3” (76) (98) 3.86 40 450<br />
RFD250-64 4” (102) (126) 5.87 40 600<br />
RFD250-96 6” (152) (177) 8.65 30 900<br />
RFD250-128 8” (203) (233) 14.07 30 1200<br />
Performance to BS EN ISO 1765 - 1997 L15<br />
(Previously BS1435 Part 1:1987) Delivery Only<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 17<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application HD DOCK LOADING OIL/PETROL SUCTION DISCHARGE 15 BAR<br />
TYPE HD DOCK LOADING OIL/PETROL SUCTION DISCHARGE (Sizes -64 to -128)<br />
Part No. RDH250 - (size code)<br />
END Fittings Swaged Holedall Ends<br />
Maximum WP 15 Bar (220 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +100°C (-22 to +212°F)<br />
Branding GATES FLEXIMAK RDH250 - Marine Dock Handling - Suction-Discharge WP15 Bar<br />
Structure NBR Inner tube - HT Polyester RF - Wire Helix - Electrical continuity - CR black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RDH250-64 4” (102) (131) 10.35 40 675<br />
RDH250-96 6” (152) (186) 16.18 30 850<br />
RDH250-128 8” (203) (243) 24.78 30 1125<br />
Performance to BS EN ISO 1765 - 1997 S15<br />
(Previously BS1435 Part 1:1987)<br />
Application OILFIELD MULTI-PURPOSE OIL/MUD/WATER 15 BAR<br />
TYPE Oilfield Multi-Purpose Oil/Mud/Water 15 bar (Sizes -32 to -128)<br />
Part No. RGD220 - (size code) - 55% Aromatics<br />
END Fittings <strong>Industrial</strong> Inserts and Clamps or Swaged Holedall Ends<br />
Maximum WP 15 Bar (220 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +100°C (-22 to +220°F)<br />
Branding GATES FLEXIMAK RGD220 - WP 15 Bar Oil Field Multi-Purpose / Fuel Delivery<br />
Structure NBR Inner tube - Textile reinforcement - Electrical continuity - CR black cover.<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
RGD220-48 3” (76) (89) 2.12 40<br />
RGD220-64 4” (102) (115) 2.97 40<br />
RGD220-80 5” (127) (143) 4.32 40<br />
RGD220-96 6” (152) (170) 6.22 40<br />
RGD220-128 8” (203) (222) 8.50 30<br />
Min Bend<br />
Radius mm<br />
Exceeds BS EN ISO 1765 L10 Working Pressure.<br />
High Tenacity Polyester Tyre Cord<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 18<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application OILFIELD MULTI-PURPOSE OIL/MUD/WATER 10 BAR<br />
TYPE Oilfield Multi-Purpose Oil/Mud/Water 20 bar (Sizes -160 to -192)<br />
Part No. RGP150 - (size code) - 55% Aromatics<br />
END Fittings <strong>Industrial</strong> Inserts and Clamps or Swaged Holedall Ends<br />
Maximum WP 10 Bar (150 PSI) 3:1 Safety Factor<br />
Temperature -30°C to +95°C (-22 to +203°F)<br />
Branding GATES FLEXIMAK RGP150 - Oilfield Suction Discharge Oil- Mud- Cement- Fuel WP 10 Bar<br />
Structure NBR Inner tube - Textile reinforcement - Wire Helix - CR black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RGP150-160 10” (254) 278.0 20.8 12 1778<br />
RGP150-192 12”(305) 331.0 26.2 12 2135<br />
Twin High Tensile Wire Helix<br />
Application OILFIELD MULTI-PURPOSE OIL/MUD/WATER 20 BAR<br />
TYPE Oilfield Multi-Purpose Oil/Mud/Water 20 bar (Sizes -32 to -128)<br />
Part No. RGP300 - (size code) - 55% Aromatics<br />
END Fittings <strong>Industrial</strong> Inserts and Clamps or Swaged Holedall Ends<br />
Maximum WP 20 Bar (300 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +100°C (-22 to +220°F)<br />
Branding GATES FLEXIMAK RGP300 - Oilfield Suction Discharge Oil- Mud- Cement- Fuel WP 20 Bar<br />
Structure NBR Inner tube - Textile reinforcement - Wire Helix - CR black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RGP300-32 2” (51) (64) 1.87 40 280<br />
RGP300-40 2½” (63) (80) 3.21 40 350<br />
RGP300-48 3” (76) (93) 3.76 40 440<br />
RGP300-64 4” (102) (122) 5.50 40 600<br />
RGP300-80 5” (127) (148) 8.19 40 850<br />
RGP300-96 6” (152) (176) 10.61 30 1060<br />
RGP300-128 8” (203) (234) 16.72 30 1200<br />
Twin High Tensile Wire Helix (BS 3592 Part 2)<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 19<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Application HEAVY DUTY OIL DELIVERY 40 BAR<br />
TYPE Heavy Duty Oil Delivery 40 bar (Sizes -48 to -96)<br />
Part No. ROD600 - (size code)<br />
END Fittings Swaged Holedall Ends only (Ferrule welded to insert)<br />
Maximum WP 40 Bar (600 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +121°C (-22 to +250°F)<br />
Branding GATES FLEXIMAK ROD600 - Oil Delivery - WP 40 Bar<br />
Structure CR smooth black inner tube - Textile reinforcement - CR smooth black cover<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
ROD600-48 3” (76) (98) 3.66 40<br />
ROD600-64 4” (102) (125) 5.26 40<br />
ROD600-96 6” (152) (180) 9.10 30<br />
Min Bend<br />
Radius mm<br />
Specially designed for HP Crude Oil<br />
Application FIRE DELUGE HOSE 20 BAR<br />
TYPE Heavy Duty Fire Deluge Hose 20 bar (Sizes -32 to -128)<br />
Part No. RFW300 - (size code)<br />
END Fittings Carbon Steel Swaged Coupling Ends<br />
Maximum WP 20 Bar (300 PSI) 4:1 Safety Factor<br />
Temperature -30°C to +85°C (-22 to +185°F)<br />
Branding GATES FLEXIMAK RFW300 - Water Delivery - WP 20 Bar<br />
Structure<br />
<strong>Gates</strong> <strong>Fleximak</strong><br />
PN<br />
Black (SBR) Synthetic Rubber inner tube, Reinforcement of Steel wire with thermal<br />
insulation and (SBR) Synthetic Rubber Cover (Red Color)<br />
ID∅<br />
Inch (mm)<br />
OD∅<br />
(mm)<br />
Weight<br />
Kg/Mtr<br />
Roll (L)<br />
Mtr<br />
Min Bend<br />
Radius mm<br />
RFW300-32 2” (50.8) (79) 4.55 40 400<br />
RFW300-64 4” (101.6) (134) 9.00 40 600<br />
RFW300-96 6” (152.4) (187) 16.70 40 1140<br />
RFW300-128 8” (200) (190) 21.50 12 1440<br />
RFW300-192 12” (348) (305) 30.50 12 2100<br />
Specially designed Hot Water Applications<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 20<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
Large Bore Fittings HOLEDALL END FITTINGS<br />
As part of <strong>Gates</strong> <strong>Fleximak</strong>’s Large Bore Marine and Oilfield Hose Program, a<br />
range of end terminations are available in different styles and are<br />
manufactured from seamless material, with certification as per BS EN 10204<br />
3.1B (Previously DIN 50049 3.1B). Materials are also regularly checked to<br />
ensure high yield strengths so that brittle fractures do not occur.<br />
The end fittings program uses both internal swage (for greater performance,<br />
higher pressures and full <strong>bore</strong>) and external swaging for standard industrial<br />
requirements.<br />
End fittings are stocked in high quality Carbon Steel however other materials<br />
are available on special request.<br />
End terminations available:<br />
Style 2” 2 ½” 3” 4” 5” 6” 8” 10” 12”<br />
NPT Male ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓<br />
ASA 150# Flange Fixed ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓<br />
ASA 150# Flange Swivel ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓<br />
ASA 300# Flange Fixed ✓ ✓ ✓ ✓ ✓ ✓<br />
FIG 100 Union ✓ ✓ ✓ ✓ ✓<br />
FIG 200 / 206 Union ✓ ✓ ✓ ✓ ✓ ✓<br />
Style<br />
3” NB<br />
Head 3” x 88.9<br />
4” NB<br />
Head 4” x 114.3<br />
4” NB<br />
Head 4½” x127.0<br />
5” NB<br />
Head 5” x 142.0<br />
5” NB<br />
Head 5½” x148.0<br />
Groove Stem* ✓ ✓ ✓ ✓ ✓<br />
* For Concrete Placement Pump Hose 80 Bar<br />
Holedall Concrete Placement Stems are designed to be compatible with Putzmeister and Schwing Concrete Pumping Units and are suitable<br />
for working pressures of up to 80 Bar. Stems are usually manufactured from Hot Finished Seamless Tube in accordance with DIN 2448.1629<br />
St52.0. Since the tail is internally swaged, this creates a full <strong>bore</strong> reducing the chances of excessive wear on the tail from product. The ferrule<br />
is welded to the tail to ensure higher-pressure rating.<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait
CAT No. 08.08 Section 04. 21<br />
GATES FLEXIMAK INDUSTRIAL CATALOGUE INDUSTRIAL & LARGE BORE HOSE<br />
End Fittings Selection Chart:<br />
Size: 2" (-32) 2-1/2" (-40) 3" (-48) 4" (-64)<br />
Hose Type Ferrule Fitting Ferrule Fitting Ferrule Fitting Ferrule Fitting<br />
RGP300 HA68 - 32 H77-32/H34-32 HA80 - 40 H77-40/H34-40 HA93 - 48 H77-48/H34-48 HA122 - 64 H77-64/H34-64<br />
RGD220 HA89 - 48 H77-48/H34-48 HA115 - 64 H77-64/H34-64<br />
RFD250 HA98 - 48 H77-48/H34-48 HA126 - 64 H77-64/H34-64<br />
OSD150 LBF - 40 LBKN - 40 LBF - 48 LBKN - 48 LBF - 64 LBKN - 64<br />
WSD150 LBF - 64 LBKN - 64<br />
WSD200 LBF - 40 LBKN - 40 LBF - 48 LBKN - 48 LBF - 64 LBKN - 64<br />
RCP1230 Single Piece H77-48HD Single Piece H77-64HD<br />
RWD600 Single Piece H77-48HD Single Piece H77-64HD<br />
RDC150 LBF - 48 LBKN - 48 LBF - 64 LBKN - 64<br />
RCE235 HA93 - 48 H77-48/H34-48 HA121 - 64 H77-64/H34-64<br />
RDH250 HA133 - 64 H77-64/H34-64<br />
ROD600 Single Piece H77-48HD Single Piece H77-64HD<br />
RFW300<br />
Size: 5" (-80) 6" (-96) 8" (-128)<br />
Hose Type Ferrule Fitting Ferrule Fitting Ferrule Fitting<br />
RGP300 HA148 - 80 H77-80/H34-80 HA176 - 96 H77-96/H34-96 HA234 - 128 H77-128/H34-128<br />
RGD220 HA143 - 80 H77-80/H34-80 HA171 - 96 H77-96/H34-96 HA224 - 128 H77-128/H34-128<br />
RFD250 HA176 - 96 H77-96/H34-96 HA234 - 128 H77-128/H34-128<br />
OSD150 LBF - 96 LBKN - 96<br />
WSD150 LBF - 96 LBKN - 96 HA224 - 128 H77-128/H34-128<br />
WSD200 LBF - 96 LBKN - 96 HA226 - 128 H77-128/H34-128<br />
RCP1230 Single Piece HVC-80 & 80-88<br />
RWD600 HA179 - 96 H77-96/H34-96<br />
RDC150 LBF - 80 LBKN - 80<br />
RCE235<br />
RDH250 HA186 - 96 H77-96/H34-96 HA242 - 128 H77-128/H34-128<br />
ROD600 HA179 - 96 H77-96/H34-96<br />
RFW300<br />
Size: 6" (-96) 8" (-128) 10" (-160) 12" (-192)<br />
Hose Type Ferrule Fitting Ferrule Fitting Ferrule Fitting Ferrule Fitting<br />
RMS150 HA173 - 96 H77-96/H34-96 HA224 - 128 H77-128/H34-128 HA279 - 160 H77-160/H34-160 HA337 - 192 H77-192/H34-192<br />
RMS150 HA282 - 160 H77-160/H34-160 HA335 - 192 H77-192/H34-192<br />
For items not shown in this catalogue, please consult <strong>Gates</strong> <strong>Fleximak</strong> for more information on the products or specifications you require<br />
The World’s Most Trusted Name in Belts, Hose, Hydraulics & Related Services<br />
Dubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait