You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The following section details some common connection options that may assist. Please note that some of these connection options may<br />
require third party interconnects or cables beyond what is supplied in the box. Talk to your retailer about the best options for connecting<br />
your TDR-2190.<br />
Connecting the Antenna<br />
ANT 1<br />
DC 5V<br />
35mA max<br />
ANT 1<br />
RF LOOP IN<br />
RF LOOP TV OUT<br />
TV OUT<br />
VIDEO<br />
AUDIO<br />
Basic Set Up - Standard TV<br />
Use supplied RCA ~ RCA cable.<br />
ANT 1<br />
DC 5V<br />
35mA max<br />
ANT 1<br />
RF LOOP IN<br />
RF LOOP TV OUT<br />
VIDEO<br />
!<br />
RS232<br />
Connection Options<br />
The TDR-2190 can power a 5VDC active antenna. By default this functionality is disabled<br />
to prevent damaging standard passive antennas. To enable this feature, please refer to the<br />
‘Antenna Power’ sub-menu on page 16.<br />
CAUTION<br />
RISK OF ELECTRICAL SHOCK<br />
DO NOT OPEN<br />
7<br />
90-250V ~<br />
50/60Hz 40Wmax<br />
Please Note: If you would like to receive either community television channels<br />
or original analogue programming, you may use the RF LOOP OUT output<br />
signal to connect your VCR or TV receiver to it. (This signal carries the same<br />
signal that is received by the antenna and is not processed by the STB).<br />
AUDIO<br />
Video<br />
Audio<br />
RS232<br />
90-250V ~<br />
50/60Hz 40Wmax<br />
CAUTION<br />
RISK OF ELECTRICAL SHOCK<br />
DO NOT OPEN<br />
!<br />
!<br />
N1334<br />
N1334<br />
7
Change language