Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Main <strong>Menu</strong><br />
!<br />
1<br />
2<br />
3<br />
!<br />
1<br />
2<br />
16<br />
Antenna Power<br />
The TDR-2190 can power a 5V active antenna. By default this<br />
functionality is disabled to prevent damaging standard passive antennas<br />
and masthead amplifi ers.<br />
Active antennas are commonly used in boats, caravans and recreational<br />
vehicles. A standard home installation with a passive antenna should not<br />
require this setting to be activated.<br />
Enabling Active 5VDC Antenna:<br />
Navigate (page 12) to the Installation sub-menu and highlight Antenna<br />
Power. Press OK ( 1<br />
20 ) to open the Antenna Power sub-menu.<br />
Use ⊳� ( 1<br />
21 ) buttons to select off or on.<br />
Press the RED ( 1<br />
24 ) button to accept the change, or press the BLUE ( 1<br />
27 )<br />
button to cancel.<br />
Initialise STB<br />
Initialising the TDR-2190 will wipe all of the channels and user settings,<br />
restoring the set top to a factory default state.<br />
Initialising The STB:<br />
Navigate (page 12) to the Installation sub-menu and highlight Initialise<br />
STB. Press OK ( 1<br />
20 ) to open the Enter Pin Code sub-menu.<br />
Use 0 ~9 ( 1<br />
11 ) buttons to enter the Pin code (default 0000).<br />
If the Pin code is incorrect you will be provided with the chance to enter it<br />
again. If the Pin code is correct, the STB will initialise and reboot.
Change language