TIRE MAINTENANCE MANUAL - Goodyear Off-The-Road (OTR)

More documents

Recommendations

Info

Demounting Procedures Before removing any rim or wheel component: • Wear proper personal protective equipment (PPE) • Remove the valve core. • Exhaust all air from the tire. • Run a piece of wire through the stem to be sure it is not plugged. Exhaust air from both tires of a dual assembly before working on either. Failure to follow this procedure may lead to death or serious injury. 35
Read safety instructions (pages 26-35) before proceeding. PROCEDURE REQUIRES: • 2 Goose-necked bead unseating tools. • Rubber lubricant. • Rubber, plastic, lead or brass faced mallet. Photo 1 Demounting Instructions Semi Drop-Center Rims Three Piece Type TG - TGD - TGF (Graders) 36 Before removing any rim or wheel component: • Wear proper personal protective equipment (PPE) • Remove the valve core. • Exhaust all air from the tire. • Run a piece of wire through the stem to be sure it is not plugged. Photo 2 Exhaust air from both tires of a dual assembly before working on either.
Page 2 and 3: To The Owner/Operator Off-the-road
Page 4 and 5: Horizontal Demounting 51” and Lar
Page 6 and 7: forms a barrier to protect the carc
Page 8 and 9: leads directly to a higher cost per
Page 10 and 11: 2) Keep front windshield, headlight
Page 12 and 13: 1) Do not overload haulage trucks.
Page 14 and 15: Fig. 14.This break resulted from a
Page 16 and 17: Inflation pressure recommendations
Page 18 and 19: Circumferential measurement is a mo
Page 20 and 21: and Front Axle Load = (B/C X Payloa
Page 22 and 23: Both tube-type and tubeless tires c
Page 24 and 25: cover. Water and moisture must be k
Page 26 and 27: Tire Changing Equipment and Tools T
Page 28 and 29: Use mmechaniicall aids when removin
Page 30 and 31: PRECAUTION Doon’t hammer beead se
Page 32 and 33: Neveer introduce a flammable substa
Page 34 and 35: SERVICING TIRE AND RIM ON MACHINE P
Page 38 and 39: After complete deflation, place ass
Page 40 and 41: 5. Work 2nd tire iron around wheel
Page 42 and 43: Be sure tool is properly seated. If
Page 44 and 45: Be sure tool is properly seated. If
Page 46 and 47: 8. Unseat back tire bead. Use hydra
Page 48 and 49: Mounting Off-The-Road Tires On Type
Page 50 and 51: Mounting Bias Off-The-Road Tires on
Page 52 and 53: 9. Lubricate O-ring with vegetable
Page 54 and 55: 6. Place back flange on rim base. 7
Page 56 and 57: Mounting Radial Off-The-Road Tires
Page 58 and 59: Mounting Tires on a Machine (Tubele
Page 60 and 61: Photo 5 Photo 6 59 Typical Heavy Du
Page 62 and 63: All off-the-road (OTR) tires are su
Page 64 and 65: Ton Mile Per Hour (TMPH/TKPH) Requi
Page 66 and 67: Formula Limitation: Tests have show
Page 68 and 69: WCF Field Applications The WCF can
Page 70 and 71: Swell factors will vary with the am
Page 72 and 73: HRR-1A (E-1) Hard Rock Rib tire for
Page 74 and 75: SGL D/L-2A (L-2) Provides excellent
Page 76 and 77: RGB-1A (G-1) An ideal tire for the
Page 78 and 79: RL-2+ (E-3+T) Unique tire for use i
Page 80 and 81: GP-2B (E-3) Non-directional tread d
Page 82 and 83: GP-3D (L-3) Centerline riding lugs
Page 84 and 85: SG-2B (G-2) The SG-2B is a 100 leve
Page 86 and 87:
85 85 LOAD LIMITS AT COLD INFLATION
Page 88 and 89:
87 LOAD LIMITS AT COLD INFLATION PR
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
101 LOAD LIMITS AT COLD INFLATION P
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
121 LOAD AND INFLATION TABLES: ENGL
Page 124 and 125:
123 LOAD AND INFLATION TABLES: METR
Page 126:
125 LOAD AND INFLATION TABLES: METR
show all

TIRE MAINTENANCE MANUAL - Goodyear Off-The-Road (OTR)

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?