Newsletter_07-2024_EN

The new DRYPOINT RA III
BEKO TECHNOLOGIES is now launching
the third generation of its proven DRYPO-
INT RA compressed air refrigeration dryers.
The new systems are available in five
different sizes for capacities from 20 m³/h
to 3000 m³/h and as air-cooled or water-cooled
model specifications.
Users benefit from greater process reliability
and energy efficiency. The modern design
with the significantly more compact dimensions
compared to the second generation
of devices with the same performance
stands for reliable compressed air drying.
Beko Technologies integrates the electronically
level-controlled Bekomat condensate
drain into the DRYPOINT RA III refrigeration
dryers as standard. The condensate drain
is monitored via the central control unit of
the refrigeration dryers. The excellent accessibility
of all components reduces the
time and effort required for servicing.
Environmentally friendly refrigerant
The new DRYPOINT RA III refrigeration
dryers use the environmentally friendly refrigerant
R513A with low GWP and ASHRAE
A1 classification for non-flammability and
zero ozone depletion potential (ODP). The
reduction in the amount of refrigerant by
an average of 33 % compared to the second
generation of appliances protects the environment.
Intelligent control
BEKO TECHNOLOGIES has equipped the
third generation of DRYPOINT RA refrigeration
dryers with advanced control units.
The smaller models for volume flows of up
to 960 m³/h have an easy-to-operate LED
controller with a large display. The more
powerful models for volume flows of up to
3000 m³/h have a touchscreen controller.
Important information on temperature and
pressure as well as other operating parameters
are displayed live. All refrigeration
dryers are equipped with a Modbus RTU
and are therefore IIoT-capable. Operators
benefit from immediately visible alarm messages
with time and date stamps as well as
downloadable reports.
Heat exchanger design saves energy
A special feature is the new horizontal design
of the integrated heat exchangers,
which differs greatly from those in conventional
refrigeration dryers. This minimizes
pressure loss and saves energy. The model
versions for volume flows from 370 m³/h
increase their cooling efficiency thanks to
an optimized microchannel condenser. This
enables the use of a smaller refrigerant compressor
and thus additional energy and cost
savings.
The new DRYPOINT RA III refrigeration
dryers also feature a patented hot gas
bypass valve with external pressure equalization.
The technology ensures a precise
and stable pressure dew point of 3°C. This
prevents freezing and gives users maximum
process reliability.
BEKO TECHNOLOGIES GMBH
D 41468 Neuss
Impressum:
cleanroom online / W.A. Schuster GmbH · Mozartstrasse 45 · D 70180 Stuttgart · Tel. +49 711 9 64 03 50 · Fax +49 711 9 64 03 66
info@reinraum.de · www.cleanroom-online.de · GF Dipl.-Designer Reinhold Schuster · Stgt, HRB 14111 · VAT DE 147811997
Original texts and images
The contributions mentioned by name are the responsibility of the particular author. Reprinting, also of extracts, are permitted only with the approval of
the editor and with reference to the source. The publisher does not accept any responsibility for unsolicited manuscripts and illustrations. The publisher
is granted the exclusive, spatial, temporal and contentual limited right to freely use the article in unchanged or edited form for all purposes as often as
desired or to transfer it to third parties for use. This right of use relates to print and electric media (Internet, databases, data carriers of all kinds).
www.reinraum.de | www.cleanroom-online.com NEWSLETTER | Edition EN 07-2024
page 28/28