User's Guide, Kodak s1220 Photo Scanning System, A ... - Database
User's Guide, Kodak s1220 Photo Scanning System, A ... - Database User's Guide, Kodak s1220 Photo Scanning System, A ... - Database
A-61601 Part No. 9E4780 s1220 Photo Scanning System User’s Guide
- Page 2 and 3: This product contains portions of i
- Page 4 and 5: 1 Introduction Supporting documenta
- Page 6 and 7: Installing the software • Install
- Page 8 and 9: The installation will begin. During
- Page 10 and 11: The following screen will be displa
- Page 12 and 13: 14.Connect the USB cable to the sca
- Page 14 and 15: 2 Getting Started Customer & Order
- Page 16 and 17: Scan Images screen When you click C
- Page 18 and 19: Enhance Picture screen Batch Inform
- Page 20 and 21: Order Preview screen This screen al
- Page 22 and 23: Order Summary & Creation screen Thi
- Page 24 and 25: Starting the software and using the
- Page 26 and 27: As photos are being scanned, the sc
- Page 28 and 29: 13.Click Yes. The Order Preview scr
- Page 30 and 31: If you want to print the order summ
- Page 32 and 33: Application issues • The Kodak s1
- Page 34 and 35: Error Code Message Description 9006
A-61601<br />
Part No. 9E4780<br />
<strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong><br />
User’s <strong>Guide</strong>
This product contains portions of imaging code owned and copyrighted by Pegasus Imaging Corp., Tampa, FL,<br />
(www.pegasustools.com). ALL RIGHTS RESERVED.
Contents<br />
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1<br />
Supporting documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1<br />
Product features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1<br />
<strong>System</strong> requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2<br />
Installing the software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3<br />
Using this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9<br />
Starting the application software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10<br />
Exiting the application software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10<br />
2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1<br />
Customer & Order Information screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1<br />
Scan Images screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3<br />
Continue Scan Images screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4<br />
Enhance Picture screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5<br />
Order Preview screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7<br />
Preview Details screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8<br />
Order Summary & Creation screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9<br />
3 Using the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1<br />
Handling guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1<br />
Starting the software and using the scanning system . . . . . . . . . . . . . . . . 3-2<br />
4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1<br />
Error code listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2<br />
Problem solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3<br />
Getting service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3<br />
A-61601 July 2007 i
1 Introduction<br />
Supporting<br />
documentation<br />
The <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> allows you to make<br />
digitizing photos easy! The <strong>Kodak</strong> <strong>Photo</strong> <strong>Scanning</strong> Software combined<br />
with the <strong>Kodak</strong> <strong>s1220</strong> Scanner allows you to scan photos, remove red<br />
eye, retouch and rotate images, and apply image sharpening if desired.<br />
Once the images are scanned, the images can be used in a variety of<br />
ways; e.g., printed, emailed, written to a CD/DVD, or uploaded to<br />
<strong>Kodak</strong> Easyshare Gallery or other photo management system for<br />
sharing and printing.<br />
This chapter provides a brief overview of product features, system<br />
requirements, instructions for installing the software, an overview of<br />
what information you will find in other chapters of this User’s <strong>Guide</strong> and<br />
procedures for logging into and exiting the software.<br />
This User’s <strong>Guide</strong> provides information on how to use the <strong>Kodak</strong> <strong>s1220</strong><br />
<strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
The User’s <strong>Guide</strong> for the <strong>Kodak</strong> i1200/i1300 Series Scanners, A-61560<br />
(included with the <strong>Kodak</strong> s1200 <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>) provides<br />
information and procedures for using the <strong>Kodak</strong> <strong>s1220</strong> Scanner. Refer<br />
to the <strong>Kodak</strong> i1200/i1300 Series Scanners User’s <strong>Guide</strong> for any<br />
maintenance and troubleshooting information you need for the scanner.<br />
Periodically, you will have to clean the scanner and change the<br />
separation module. Chapter 5, in the scanner User’s <strong>Guide</strong> (A-61560)<br />
provides maintenance information.<br />
Product features The <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> provides the following<br />
features:<br />
• captures both the front and back of photos at the same time or just<br />
fronts or backs<br />
• scans up to 30 (front and back), 4 x 6” photos per minute at 300 dpi<br />
resolution<br />
• handles photos from 2.5 x 3.5” (wallet size) to 8 x 10”<br />
• can use the <strong>Kodak</strong> A4 Flatbed Accessory to safety scan fragile and<br />
precious photos<br />
• provides a user friendly interface which allows you to scan and<br />
enhance your photos<br />
• allows you to rotate images 90, 180 or 270 degrees<br />
• allows you to remove red eye<br />
• provides a choice of resolutions: 300, 600 or 1200 dpi<br />
• stores JPEG compressed images as .jpg files for printing, emailing or<br />
uploading to a photo management system<br />
• supports the optional flatbed accessory<br />
A-61601 July 2007 1-1
<strong>System</strong> requirements Following is the minimum recommended system configuration to run<br />
the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>:<br />
• Intel Pentium IV, 3.2 GHz processor, 250 MB free hard disk space, 1<br />
GB RAM for 300 dpi or 3 GB RAM for 600 and 1200 dpi<br />
• Two USB 2.0 ports (1 for the scanner, 1 for the WIBU key)<br />
• Microsoft Windows XP, Service Pack 2; Windows 2000 Professional;<br />
Windows Vista — all supporting USB 2.0 with administrator privileges<br />
for installation<br />
• Microsoft .Net Framework 2.0 (included on the installation CD)<br />
NOTE: Depending on how you choose to manage the images after<br />
scanning, you will need supporting devices such as CD/DVD<br />
Writers, photo printers, etc.<br />
1-2 A-61601 July 2007
Installing the<br />
software<br />
• Install the software before connecting the scanner to the PC.<br />
• Be sure you have administrator rights. The <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong><br />
<strong>System</strong> application must be installed under Administrator and run<br />
under Administrator or Standard groups.<br />
• Close any currently running applications that use a WIBU security<br />
key before starting the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> installation.<br />
1. Place the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> installation CD in the<br />
CD-ROM drive. The software installation will automatically start. If<br />
the software does not auto start, access the drive where the<br />
installation and application CD is inserted and browse to the<br />
INSTALLSTW.exe file on the root directory of the CD.<br />
NOTE: If a security software application is installed on the PC, you<br />
will be asked to Allow or Deny the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong><br />
<strong>System</strong> from installing or running, select Allow or Yes. If<br />
you inadvertently select Deny or No, open the security<br />
software application and set the permission to Allow the<br />
application to install and run.<br />
A-61601 July 2007 1-3
2. Click Next. The Software Licence screen will be displayed.<br />
3. Read the License Agreement and click Next.<br />
The Select Destination Directory screen will be displayed.<br />
4. Click Next or click Browse if you want to install the software in a<br />
directory other than the default.<br />
1-4 A-61601 July 2007
The installation will begin.<br />
During the installation, the Browse dialog box will be displayed.<br />
5. If you want to store the scanned images in the default C:/<br />
Scanned_Pictures default directory, click Next. Otherwise, click<br />
Browse to go to the directory where you want to store your scanned<br />
images, or enter a new folder name where you want to store the<br />
images, then click OK. See Chapter 4, “Application configuration”<br />
for information on changing the Scanned Images folder after<br />
installation.<br />
The following messages will be displayed.<br />
A-61601 July 2007 1-5
The WIBU-KEY Setup screen will be displayed.<br />
NOTE: Do not install the WIBU key at this time.<br />
6. Click Next.<br />
The Language screen will be displayed.<br />
7. Select the desired language and click Next.<br />
1-6 A-61601 July 2007
The following screen will be displayed.<br />
8. Click Next. A message will be displayed asking if you want to create<br />
the folder, click Yes to continue. The following screen will be<br />
displayed.<br />
9. Click Next. The following screen will be displayed.<br />
A-61601 July 2007 1-7
10.Click Next. The following screen will be displayed.<br />
11. Click Finish.<br />
12.Click OK on the Setup screen when the installation is complete.<br />
When WIBU has been installed, the Installation Complete screen<br />
will be displayed.<br />
13.Insert the WIBU key into the USB port of the PC.<br />
1-8 A-61601 July 2007
14.Connect the USB cable to the scanner and the PC.<br />
15.If you have an optional <strong>Kodak</strong> A4 Flatbed, connect the flatbed cable<br />
to scanner.<br />
16.Turn on the scanner.<br />
The PC will recognize the scanner and optional flatbed. Follow any<br />
prompts.<br />
Using this manual This User’s <strong>Guide</strong> describes the functions and procedures of the <strong>Kodak</strong><br />
<strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Chapter 2, Getting Started — describes the screens and tools that are<br />
available when using the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Chapter 3, Using the Software — provides procedures for using the<br />
features and functionality of the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Chapter 4, Troubleshooting — provides an error code listing, a list of<br />
potential problems you may encounter when using the <strong>Kodak</strong> <strong>Photo</strong><br />
<strong>Scanning</strong> Software and instructions on how to contact <strong>Kodak</strong> Service.<br />
NOTE: For information on how to use the <strong>Kodak</strong> <strong>s1220</strong> Scanner, Scan<br />
Validation Tool or smart touch functionality, refer to the User’s<br />
<strong>Guide</strong> for the <strong>Kodak</strong> i1200/i1300 Series Scanners, A-61560<br />
(included with your <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>).<br />
A-61601 July 2007 1-9
Starting the<br />
application software<br />
Exiting the<br />
application software<br />
• Double-click on the application shortcut on your desktop or select<br />
Programs><strong>Kodak</strong>>Document Imaging><strong>s1220</strong> <strong>Photo</strong> <strong>System</strong>><br />
<strong>s1220</strong> <strong>Photo</strong> Scanner. The Customer Information screen will be<br />
displayed.<br />
To exit the software:<br />
• Click the Exit icon in the lower-right hand corner on any screen or<br />
click the Close box in the upper right-hand corner.<br />
1-10 A-61601 July 2007
2 Getting Started<br />
Customer & Order<br />
Information screen<br />
This chapter describes the screens and icons that are available when<br />
using the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
All screens within the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> provide the<br />
following icons:<br />
About: displays the software version and copyright information.<br />
Exit: closes the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
A message area is provided on all screens in the title bar.<br />
Messages are displayed in this area<br />
When you launch the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> application<br />
software, the Customer & Order Information screen will be displayed.<br />
Order # — this number is prefixed with the date and time and is<br />
appended with any text you want to add for your own reference. An<br />
entry must be made in this field. Up to 51 alphanumerical characters<br />
are allowed in this field.<br />
A-61601 July 2007 2-1
Customer Information — enter the customer name, address and<br />
email address information. You do not need to make an entry in these<br />
fields.<br />
• Up to 64 characters are allowed in the Last, First, Street, and City<br />
fields.<br />
• Up to 20 characters are allowed in the State/County/Country and<br />
Phone fields.<br />
• If you enter an email address, it must be a valid email address<br />
format.<br />
• Up to 10 numeric characters are allowed in the Zip/Post Code field.<br />
Continue — displays the next screen and allows you to proceed to the<br />
next set of scanning options.<br />
Resolution — allows you to select the dots per inch (dpi), which<br />
determines the image quality. The options are: 300, 600 and 1200 dpi.<br />
The default is 300 dpi. In most cases, 300 dpi is sufficient. Selecting<br />
600 dpi or 1200 dpi increases scanning time and image size.<br />
Mode — select one of the following:<br />
• <strong>Photo</strong> Face Up — captures the picture side facing upward. When<br />
scanning, place the stack of photos in the feeder so the front side is<br />
facing you.<br />
• <strong>Photo</strong> Face Down — captures the picture side facing downward.<br />
When scanning, place the photo in the feeder facing away from you.<br />
• Two Sided - <strong>Photo</strong> Face Up — captures both sides of the photo.<br />
Sharpen Image — sharpens the focus and edges of the scanned<br />
image. If this option is selected, all photos within the order (the stack of<br />
photos to be scanned) will be sharpened. This option is turned off, by<br />
default. You should not need to use Sharpen Images when scanning<br />
good quality images.<br />
2-2 A-61601 July 2007
Scan Images screen When you click Continue on the Customer & Order Information screen,<br />
the Scan Images screen will be displayed.<br />
16-Up Display window — displays up to 16 images at a time.<br />
Previous — goes back to the Customer & Order Information screen.<br />
Start Over — goes back to the Customer & Order Information screen<br />
but clears all information and scanned images on the Scan Images<br />
screen. The confirmation message Do you want to start over? This<br />
will delete all the files that were scanned will be displayed.<br />
Start <strong>Scanning</strong> — scans photos.<br />
Batch Information — these values will be 0 until a batch has been<br />
scanned.<br />
• Image: displays the number of the first image shown in the 16-Up<br />
Display window.<br />
• To: displays the number of the last image shown in the 16-Up Display<br />
window.<br />
• Of: displays the total number of images scanned in the batch.<br />
Total Images: displays the total number of scanned images.<br />
Moves to the previous set of 16 images.<br />
Moves to the next set of 16 images.<br />
A-61601 July 2007 2-3
Continue Scan<br />
Images screen<br />
When you click Start <strong>Scanning</strong> on the Scan Images screen, thumbnail<br />
images will be displayed in the 16-Up Display window as they are being<br />
scanned. After the pictures are displayed you can rotate and retouch<br />
the images.<br />
16-Up Display window — displays up to 16 images at a time.<br />
Rotates the image 90 degrees counter-clockwise (left).<br />
Rotates the image 90 degrees clockwise (right).<br />
Moves to the previous set of 16 images, if any.<br />
Moves to the next set of 16 images, if any.<br />
Continue — displays the Order Preview screen.<br />
Start Over — goes back to the Customer & Order Information screen<br />
and will clear all information and scanned images. The confirmation<br />
message Do you want to start over? This will delete all the files<br />
that were scanned will be displayed.<br />
Continue <strong>Scanning</strong> — allows you to scan another batch of photos.<br />
Redo Scan Batch — replaces the last batch of scanned images.<br />
Retouch Batch — automatically retouches (e.g., color, contrast,<br />
brightness, etc.) all of the images in a batch. When this option is<br />
selected, an Image Retouch progress bar is displayed at the top of the<br />
screen.<br />
2-4 A-61601 July 2007
Enhance Picture<br />
screen<br />
Batch Information — these values will be 0 until a batch has been<br />
scanned.<br />
• Image: displays the number of the first image shown in the 16-Up<br />
Display window.<br />
• To: displays the number of the last image shown in the 16-Up Display<br />
window.<br />
• Of: displays the total number of scanned images in the batch.<br />
Total Images: displays the total number of scanned images.<br />
When you click on an image on the Scan Images screen, the image will<br />
be displayed in the Original Picture and Enhanced Picture display<br />
windows.<br />
Original Picture/Enhanced Picture — the selected photo will be<br />
displayed. The Original Picture window displays the image “as-is”.<br />
While you make changes to the displayed image, the changes will be<br />
displayed in the Enhanced Picture window. When you are finished, a<br />
message will be displayed asking if you want to save the changes.<br />
Return — goes back to the Scan Images screen.<br />
Start Over — goes back to the Customer & Order Information screen<br />
but clears all information and scanned images on the Scan Images<br />
screen. The confirmation message Do you want to start over? This<br />
will delete all the files that were scanned will be displayed.<br />
A-61601 July 2007 2-5
Enhance Picture icons<br />
Deletes the selected image.<br />
Replaces the current image with the new scanned image.<br />
Enhances the colors in the scanned image.<br />
Removes the red eye in the scanned image.<br />
Rotates the image 90 degrees to the left (counter-clockwise).<br />
Rotates the image 90 degrees to the right (clockwise).<br />
Allows you to scroll through the current batch of 16 images.<br />
Allows you to scroll through the current batch of 16 images.<br />
2-6 A-61601 July 2007
Order Preview screen This screen allows you to preview and modify your photos before<br />
completing this order.<br />
Display window — displays the folder(s) of scanned photos. You can<br />
click on a folder to view the contents.<br />
Moves to the previous set of folders.<br />
Moves to the next set of folders.<br />
Continue — displays the Order Summary and Creation screen.<br />
Start Over — goes back to the Customer & Order Information screen<br />
but clears all information and scanned images on the Scan Images<br />
screen. The confirmation message Do you want to start over? This<br />
will delete all the files that were scanned will be displayed.<br />
This Order — provides a summary of the folders displayed on this<br />
screen.<br />
A-61601 July 2007 2-7
Preview Details<br />
screen<br />
This screen allows you to preview the photos within a selected folder<br />
and enhance them if necessary.<br />
16-Up Display window — displays up to 16 images from the selected<br />
folder.<br />
Rotates the image 90 degrees counter-clockwise (left).<br />
Rotates the image 90 degrees clockwise (right).<br />
Moves to the previous set of 16 images.<br />
Moves to the next set of 16 images.<br />
Continue — displays the Order Preview screen.<br />
Start Over — goes back to the Customer & Order Information screen<br />
but clears all information and scanned images on the Scan Images<br />
screen. The confirmation message Do you want to start over? This<br />
will delete all the files that were scanned will be displayed.<br />
Retouch Folder— automatically retouches all the photos within the<br />
selected folder.<br />
This Folder — provides a summary of the current images and how<br />
many images are in this folder.<br />
2-8 A-61601 July 2007
Order Summary &<br />
Creation screen<br />
This screen allows you to finalize your order.<br />
Display window — provides the order number, customer name,<br />
address and email address. It also provides the number of photos<br />
scanned. If desired, you can change the Name, Address and Email<br />
information.<br />
Finalize order — you can either print the order summary or complete<br />
the order.<br />
• Print Order Details — if selected, allows you to print the order<br />
summary. The operating system’s Print dialog box will be displayed.<br />
You may send the order summary to the default printer, or select a<br />
different printer from the list box. After you select Print, the order<br />
summary will be sent to the printer and a message will be displayed<br />
asking if you want to start another scan session.<br />
• Print Order Details — if not selected, start another scan session or<br />
exit the application software.<br />
Previous — displays the Order Preview screen.<br />
Start Over — goes back to the Customer & Order Information screen<br />
allowing you to start a new session but clears all information and<br />
scanned images on the Scan Images screen. The confirmation<br />
message Do you want to start over? This will delete all the files<br />
that were scanned will be displayed.<br />
A-61601 July 2007 2-9
3 Using the Software<br />
The <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> allows you to scan and<br />
enhance photographs using a <strong>Kodak</strong> <strong>s1220</strong> Scanner. Once the photos<br />
are scanned, each photo is saved as a .jpg file that can be written to a<br />
CD/DVD or uploaded to the <strong>Kodak</strong> Easyshare Gallery or other photo<br />
management system for sharing and printing.<br />
Chapter 2 provides an overview of the screens and tools that you will<br />
use with the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
This chapter provides procedures for using the <strong>Photo</strong> <strong>Scanning</strong><br />
<strong>System</strong>.<br />
Handling guidelines Before scanning a batch of photos, review the following guidelines to<br />
save time and improve efficiency.<br />
• Handle photos with care! Be sure your hands are clean or wear<br />
clean white cotton gloves. Avoid touching the photographic surface.<br />
• Fragile or precious photos should be scanned using the <strong>Kodak</strong> A4<br />
Flatbed Accessory to eliminate the risk of damage from automated<br />
handling.<br />
• Use the scanner in a clean, dust-free environment.<br />
• Avoid unnecessary bending and flexing of photos.<br />
• Due to copyright laws, any professionally taken photos that are<br />
copyrighted cannot be scanned without written permission from the<br />
owner.<br />
• Two-sided photo scanning:<br />
- If you have a batch of photos where both sides of some photos<br />
need to be scanned, group these photos together and scan them<br />
in a separate batch. This will save time deleting unwanted blank<br />
images.<br />
- If you need to rescan a two-sided photo, always put the side you<br />
want to rescan facing down.<br />
• If you have a batch of photos that need retouching, group these<br />
photos together. When you select Retouch Batch, the application<br />
software retouches the entire batch of photos at the same time.<br />
• When you delete an image in a batch of 16, the first photo in the next<br />
batch of 16 will be placed in the batch of 16 where you deleted the<br />
image. Take the time to review the batch to be sure you do not need<br />
to do any additional enhancing.<br />
• The Sharpen Image option is not necessary for good quality photos.<br />
If you use Sharpen Image, only use it at 300 dpi or processing time<br />
will be increased.<br />
A-61601 July 2007 3-1
Starting the software<br />
and using the<br />
scanning system<br />
Before you begin, be sure the <strong>s1220</strong> Scanner is on and in the Ready<br />
state.<br />
1. Double-click on the <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> software icon. The<br />
Customer & Order Information screen will be displayed.<br />
2. Enter up to 51 alphanumeric characters in the Order # field to<br />
identify this order. You must make an entry in this field.<br />
3. If desired, enter the last name, first name, phone, street, city, state/<br />
county/country, zip/post code and email information in the available<br />
fields.<br />
4. Select the desired resolution: 300 dpi, 600 dpi or 1200 dpi.<br />
5. Select the Mode you want to scan: <strong>Photo</strong> Face Up, <strong>Photo</strong> Face<br />
Down, or Two Sided - <strong>Photo</strong> Face Up.<br />
NOTES:<br />
• If you are using an optional <strong>Kodak</strong> A4 Flatbed, you must select<br />
<strong>Photo</strong> Face Down or Two Sided - <strong>Photo</strong> Face Up.<br />
• If you are using the flatbed, be sure there are no photos in the<br />
input tray of the scanner, otherwise the photos that are in the<br />
input tray will be scanned instead of the photo on the flatbed.<br />
Refer to the documentation included with the <strong>Kodak</strong> A4 Flatbed<br />
Accessory for setup instructions.<br />
6. If you want to use the Sharpen Images option, click the checkbox.<br />
This option is not intended to be used with good quality photos.<br />
NOTE: Only use this option at 300 dpi. Using higher dpi settings<br />
increases processing time.<br />
3-2 A-61601 July 2007
7. Select Continue. The Scan Images screen will be displayed.<br />
8. Place the first batch of photos in the scanner. The feeder can<br />
accommodate up to 30 photos at a time. Depending on your<br />
selection in Step 5, be sure the side you want to scan is facing<br />
properly.<br />
NOTES:<br />
• For best feeding performance always scan the photos with the<br />
scanner body tilted back to the 25-degree angle and with photos<br />
face up as shown in the illustration below. For more information<br />
see the section entitled “Scanner positions” in the User’s <strong>Guide</strong><br />
for the <strong>Kodak</strong> i1200/i1300 Series Scanners, A-61560.<br />
• The scanner scans photos from the bottom of the stack first.<br />
Therefore, if you want your photos scanned in a specific order,<br />
stack your photos with the first photo being closet to the input<br />
tray.<br />
9. Click Start <strong>Scanning</strong>. The message, Scanner lamps are<br />
warming, may be displayed. <strong>Scanning</strong> will start when the lamps are<br />
ready (usually within a few seconds).<br />
A-61601 July 2007 3-3
As photos are being scanned, the scanned images will be displayed<br />
in the 16-Up Display window.<br />
10.When a batch of photos has been scanned, retouch and/or rotate<br />
the photos as desired. If you do not need to make any changes and<br />
are finished scanning all photos in this order, click Continue.<br />
11. If you want to scan more photos, make enhancements, etc. these<br />
options are available:<br />
• If you want to scan another batch of photos in this order, place<br />
more photos in the feeder and click Continue <strong>Scanning</strong>. The<br />
photos will be scanned. When you are finished scanning all the<br />
photos in the order, go to Step 12.<br />
• Use the rotate arrows on each displayed image to rotate as<br />
desired. Make any other desired changes then go to Step 12.<br />
• If you want to retouch all of the photos in the scanned batch, click<br />
Retouch Batch. All the images in the batch will be retouched.<br />
Make any other desired changes then go to Step 12.<br />
• If you want to rescan all of the photos in the scanned batch, click<br />
Redo Scan Batch. The 16-Up Display window will be cleared,<br />
and the rescanned photos will be displayed on the screen. Make<br />
any other desired changes then go to Step 12.<br />
3-4 A-61601 July 2007
• If you want to use any special enhancement features, e.g.,<br />
correct red eye, delete an image, retouch a specific image, etc.),<br />
click on the image you want to enhance. The Enhanced Picture<br />
screen will be displayed. Make any other desired changes then<br />
go to Step 12.<br />
12.When finished making changes and scanning, click Continue. The<br />
following message will be displayed.<br />
A-61601 July 2007 3-5
13.Click Yes. The Order Preview screen will be displayed.<br />
14.Select the folder that you want to preview and click Continue.<br />
The Preview Details screen will be displayed.<br />
15.From the Preview Details screen you can make any final changes.<br />
When finished, click Continue.<br />
3-6 A-61601 July 2007
The Order Preview screen will be displayed.<br />
16.If you want to review the contents of the folder one more time before<br />
finishing your order, select the desired folder, otherwise, click<br />
Continue.<br />
The Order Summary & Creation screen will be displayed.<br />
17.Verify that all the information in the order summary is complete and<br />
click Finalize Order.<br />
A-61601 July 2007 3-7
If you want to print the order summary, check the Print Order<br />
Details check box. When you click Finalize Order, the Print dialog<br />
box will be displayed allowing you to print the order summary.<br />
The following message will be displayed.<br />
18.If you want to start a new scan session, click Yes. Otherwise, click<br />
No to close the <strong>Kodak</strong> <strong>Photo</strong> <strong>Scanning</strong> Software.<br />
Unless you changed the default at installation, scanned images can be<br />
found at C:\Scanned_Pictures. These images can now be handled in<br />
a variety of ways: uploaded to a photo management system, burned to<br />
CD/DVD, printed, emailed, etc. A .xml file will also be created with the<br />
print order summary. The .xml file can be found within the print order<br />
directory.<br />
3-8 A-61601 July 2007
4 Troubleshooting<br />
Use the Error Code list on the next page as a guide to check possible<br />
solutions to problems you may encounter when using the <strong>Kodak</strong> <strong>s1220</strong><br />
<strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Installation Issues<br />
• Unless you changed the default at installation, scanned images can<br />
be found at C:\Scanned_Pictures. These images can now be<br />
handled in a variety of ways: uploaded to a photo management<br />
system, burned to CD/DVD, printed, emailed, etc. A .xml file will also<br />
be created with the print order summary. The .xml file can be found<br />
within the print order directory.<br />
• The <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> uses Microsoft .NET Framework<br />
2.0. If .Net Framework 2.0 is not installed on the PC, it will be<br />
installed during installation.<br />
• If a security software application is installed on the PC, you will be<br />
asked to Allow or Deny the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> from<br />
installing or running, select Allow or Yes. If you inadvertently select<br />
Deny or No, open the security software application and set the<br />
permission to Allow the application to install and run.<br />
• Close any currently running applications that use a WIBU security<br />
key before starting the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> installation.<br />
• The WIBU key should be plugged into a USB 2.0 port directly on the<br />
PC, not into a USB hub that is then plugged into a PC USB port.<br />
Plugging a USB 2.0 hub into a USB 1.1 port can cause the WIBU<br />
software to not load automatically (see the next issue).<br />
• If after installation of the application and plug-in of the WIBU key, the<br />
WIBU software does not automatically load, a message may be<br />
displayed asking for the WIBU installation disk. Select that you have<br />
the software disk and choose the CD drive with the <strong>s1220</strong> <strong>Photo</strong><br />
<strong>Scanning</strong> <strong>System</strong> installation CD. This will complete the WIBU<br />
software installation.<br />
A-61601 July 2007 4-1
Application issues<br />
• The <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> has a fixed screen size of<br />
1024 x 768. You may want to change the taskbar properties by<br />
unselecting "Keep the taskbar on top of other windows." This will<br />
keep the taskbar from covering the lower portion of the application<br />
when the screen resolution is set at 1024 x 768. You can also<br />
alternatively set the display properties to a higher screen resolution<br />
than 1024 x 768, such as 1280 x 960 so the application does not<br />
cover the entire desktop.<br />
• If the scanner encounters E9 Document Jams when scanning at<br />
higher resolutions (600 or 1200 dpi) and the PCs RAM is less than<br />
3GB, then the memory should be increased to the required 3GB<br />
RAM for high resolution scanning.<br />
Application Configuration<br />
• The <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> may be configured by modifying<br />
the PrintScan.ini file in the <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong> installation<br />
directory. You can change the location for the output JPG files<br />
(Target_Path) and adjust the number of pictures in a folder for<br />
burning CDs or DVDs (NoFilesInFolder). The default values for<br />
SharpenIntensity, Contrast, JPGChromeFactor, JPGLumFactor, and<br />
JPGSubSampling are preset to optimal values and generally do not<br />
need to be modified.<br />
4-2 A-61601 July 2007
Error code listing Following are some error codes that you may encounter when using the<br />
<strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Error Code Message Description<br />
251085:<br />
1220<br />
Access to destination folder XXXX could not<br />
be set exiting the application.<br />
Start error. <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong><br />
<strong>System</strong> copy protection error. No license<br />
found.<br />
6017 Please check if the correct WIBU USB<br />
license dongle has been inserted in your<br />
PCs USB port. If this error persists, please<br />
contact support with error code 6017.<br />
6XXX Please check if the correct WIBU USB<br />
License dongle has been inserted into your<br />
PCs USB port. If this error persists, please<br />
contact support with error code 6XXX.<br />
7000 Please check if WIBU runtime has been<br />
installed. WIBU runtime (WkRuntime.exe)<br />
can be found on the CD provided with the<br />
<strong>Kodak</strong> scanner.<br />
7001 License .dat file not found. Please contact<br />
support with error code 7001.<br />
8001 Profile error. Please verify that STW default<br />
profile settings have not been altered. If this<br />
error persists, please contact support with<br />
error code 8001.<br />
8002 Scanner name not found. Please verify that<br />
STW default profile settings have not been<br />
altered. If this error persists, please contact<br />
support with error code 8002.<br />
9001, 9002,<br />
9003<br />
TWAIN drivers could not be instantiated.<br />
Please retry. If this error persists, please<br />
contact support with error code 900X.<br />
Verify that there is a valid Target_Path for the scanned<br />
photos in the PrintScan.ini file.<br />
Verify that the supplied <strong>s1220</strong> WIBU key is plugged into<br />
a USB 2.0 port on the PC.<br />
Verify that the supplied <strong>s1220</strong> WIBU key is plugged into<br />
a USB 2.0 port on the PC.<br />
Verify that the supplied <strong>s1220</strong> WIBU key is plugged into<br />
a USB 2.0 port on the PC.<br />
Contact <strong>Kodak</strong> Service.<br />
Contact <strong>Kodak</strong> Service.<br />
Reinstall the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Refer to the section entitled, “Installing the software” in<br />
Chapter 1.<br />
Reinstall the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Refer to the section entitled, “Installing the software” in<br />
Chapter 1.<br />
Reinstall the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Refer to the section entitled, “Installing the software” in<br />
Chapter 1.<br />
9004 Could not find a <strong>Kodak</strong> scanner. Be sure that a <strong>Kodak</strong> scanner is attached, turned on and<br />
the green LED is on and steady. If the error persists,<br />
contact <strong>Kodak</strong> Service.<br />
9005 Please check if scanner is available to STW. Verify that the <strong>s1220</strong> Scanner is connected and<br />
powered on. If this error persists, contact <strong>Kodak</strong><br />
Service.<br />
A-61601 July 2007 4-3
Error Code Message Description<br />
9006, 9007,<br />
9008, 9010<br />
Could not instantiate the scanner. Please<br />
retry. If this error persists, please contact<br />
support with error code 900X.<br />
9009 Could not get the image from the scanner.<br />
Please retry. If this error persists, please<br />
contact support with error code 9009.<br />
Reinstall the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong> <strong>System</strong>.<br />
Refer to the section entitled, “Installing the software” in<br />
Chapter 1.<br />
Contact <strong>Kodak</strong> Service.<br />
<strong>s1220</strong> Scanner specific errors.<br />
For more information see the User’s <strong>Guide</strong> for the <strong>Kodak</strong> i1200/i1300 Series Scanners.<br />
E0 USB cable is not connected Connect the USB cable to the PC and scanner.<br />
E6 Cover open Be sure the scanner cover is securely closed and begin<br />
scanning.<br />
E9 Document jam A document is lodged in the scanner. Clear the paper<br />
path by opening the scanner cover, removing the lodged<br />
document and closing the scanner cover.<br />
Problem solving Use the chart below as a guide to check possible solutions to problems<br />
you may encounter when using the <strong>Kodak</strong> <strong>s1220</strong> <strong>Photo</strong> <strong>Scanning</strong><br />
<strong>System</strong>.<br />
Problem Possible Solution<br />
Application display<br />
windows and screens are<br />
distorted<br />
Check the font size settings in the Display<br />
Properties. The settings should be set to Normal<br />
96 dpi with 32-bit color.<br />
Getting service If your scanner needs service, go to the website at:<br />
www.kodak.com/go/docimaging<br />
There you can find out how best to obtain service for your scanner for<br />
your region.<br />
4-4 A-61601 July 2007
Eastman <strong>Kodak</strong> Company<br />
343 State Street<br />
Rochester, NY 14650 U.S.A.<br />
© <strong>Kodak</strong>, 2007. All rights reserved.<br />
TM: <strong>Kodak</strong>