Section 16 Custom Chrome Europe Catalog 2024

16 

SHEETMETAL 

www.custom-chrome-europe.com

FRONT FENDER FOR SPORTSTER 

921457 

921458 


PART# 

Front Fender for Sportster S 

• Fits standard OEM 160/70 17“ tires 

• Tight fit over the tire 

• Perfect addition to any conversion 

• Adapted to the radius of the front tire 

• With integrated protection for the fork tubes 

• Made of 2,0 mm steel 

• High torsion strength 

• 3D laser cut, maximum fit precision 

• Shapely due to perfect contour 

• Mounting holes already present 

• Easy installation 

• Delivered unpainted 

• Made in Germany 

Fitment: 21-23 Sportster S RH1250S , Fitment Note: For 160/70 17“ Tire , Color: Raw , Material: Steel , Unit: Each , Qty.: 1 

DESCRIPTION 

921457 Standard 17“ 

921458 Street Cut 17“ 

16.2 

Attention! Articles marked with the APPROVAL-sign do not necessarily cover all H-D and Indian models and years. Before ordering please check if your bike is listed in 

the approval certificate. Please contact your CCE dealer or our sales support. In case of any complaints we do not grant any warranty and will not withdraw those parts.


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

Front Fender for Sportster S 

Special front mudguard for original tires. 

• Supplied undrilled and unpainted 

Part#: 923638 , Fitment: 21-23 Sportster S RH1250S , Material: Fibre Glass , Unit: Each , Qty.: 1 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

642873 923864 

TRANNY & 

CLUTCH 

DRIVELINE 

Bobber Front Fender 

It‘s shorter, narrower and clears the view of the front wheel. No adjustment work necessary! All holes and millings are milled on the 

most modern 5-axis CNC machining centers, so that the fender only has to be exchanged for the original. 

Position: Front , Material: ABS , Unit: Each , Qty.: 1 

PART# FITMENT FITMENT NOTE COLOR CERTIFICATION 

893728 10-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS Gloss Black With Approval 

642873 10-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS Ready to Paint With Approval 

923865 22-23 Nightster RH975, 23 Nightster Special RH975S Gloss Black With Approval 

923864 22-23 Nightster RH975, 23 Nightster Special RH975S Ready to Paint With Approval 

893746 87-20 Sportster, except 08-10 XR1200, 10-13 XR1200X, 

10-20 XL1200X, 16-20 XL1200CX, 18 XL1200X ANX, 19-20 

XL1200XS 

Fits only Narrow Glide Forks, 

not for Models equipped 

with 21“ Wheels. 

Ready to Paint With Approval 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

for more details check www.custom-chrome-europe.com 

16.3


Custom V1 Front Fender 

This front fender is shorter, narrower and makes the view of the 

front wheel free. In addition to account for the original metal 

holder. The mounting holes are designed as slots, so the fenders 

can be adjusted in height continuously so you can regulate the 

distance between. 

Fitment: 21-23 Sportster S RH1250S , Certification: With 

Approval , Position: Front , Material: ABS , Wheel /Tire ø: 

17“ , Unit: Each , Qty.: 1 

PART# 

COLOR 

921641 Gloss Black 

921640 Ready to Paint 


• Direct fit to OEM front fender mounting points 

• Available ready to paint or in H-D black 

Fitment: 21-23 Sportster S RH1250S , Certification: With 

Approval , Position: Front , Material: ABS , Wheel /Tire ø: 

17“ , Unit: Each , Qty.: 1 

PART# 

COLOR 



607599 893776 923866 

923867 

Old School Front Fender 

• ABS plastic 

• No adjustment work necessary 

• All drilling and milling are machined on the latest 5-axis CNC machining centers 

• Fender replaces the OEM part 

Position: Front , Material: ABS , Unit: Each , Qty.: 1 

923867 


PART# FITMENT FITMENT NOTE COLOR CERTIFICATION 

893747 05-06 XL(H)53C, 02-03, 05-15 XL883R, 05-17 XL883L, 04-09 XL883, 98-04, 

07 XL53C, 86-03 XLH883, 00-03 XL883H, 08-10 XL883C, 09-20 XL883N 

For Narrow Forks. Ready to Paint With Approval 

607599 10-15 XL1200X Ready to Paint With Approval 

893776 10-15 XL1200X Gloss Black With Approval 

923867 22-23 Nightster RH975, 23 Nightster Special RH975S Gloss Black 

923866 22-23 Nightster RH975, 23 Nightster Special RH975S Ready to Paint 





APPAREL 

Speedo Relocation Dash Cover for Nightster 

Models 

• Ready to paint with perfect primer layer (minor labor) 

• Black glossy (just remove protective film and the fender shines 

in the original H-D black!) 

• All mounting drillings are pre-set on 5-axis CNC machines 

Fitment: 22-23 Nightster RH975, 23 Nightster Special 

RH975S , Material: ABS , Unit: Set , Qty.: 1 

PART# 

COLOR 

923898 Gloss Black 

923897 Ready to Paint 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ist im AB zwar so drin sollte aber bestimmt nach hinten 

ELECTRICAL 

EXHAUST 

INTAKE 

Non Cut Out Front Fender 

• Precision made in Germany 

• Made of solid steel 

• Perfect finish with less pre-print labor to do 

Color: Raw , Position: Front , Material: Steel , Unit: Each , Qty.: 1 

FITMENT DESCRIPTION PART# 

11-15 XL1200X 130/70-18, 120/70-18,130/90-16, 130/80-17 890584 

ENGINE 

GASKETS 

11-20 XL1200C, 13-16 XL1200CA, 13-17 XL1200CB, 13 XL1200C ANV 130/90-16 902115 

14-18 XL1200T, 05-20 XL883L, 20 XL 1200T, 05-06 XL(H)53C, 04-10 XL1200C, 04-09 130/70-18, 120/70-18,130/90-16, 130/80-17 890586 

XL883, 04, 07 XL53C, 08-10 XL883C 

16-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS 130/70-18, 120/70-18,130/90-16, 130/80-17 890585 

21-23 Sportster S RH1250S 160/70-17, Kit includes Adapter Plates 926541 

86-20 Sportster, except 05-20 XL883L, 11-20 XL1200C, 13-16 XL1200CA, 13-17 100/90-19, 110/90-19 86678 

XL1200CB, 10-20 XL1200X, 14-18 XL1200T, 16-20 XL1200CX, 06-10 XL1200L, 08-10 

XR1200, 10-13 XR1200X, 13 XL1200C ANV, 18 XL1200X ANX, 19-20 XL1200XS, 20 

XL 1200T, 91-05 Dyna, except 93-03 FXDWG, 02 FXDWGSE3, 04-05 FXDWGI 

86-20 Sportster, except 05-20 XL883L, 11-20 XL1200C, 13-16 XL1200CA, 13-17 130/60R23, MH 90-21 890588 




86-20 Sportster, except 05-20 XL883L, 11-20 XL1200C, 13-16 XL1200CA, 13-17 




Universal, Drill and Cut 890590 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

Roadster Front Fender 

• Direct fit to OEM front fender mounting points. 

PART# FITMENT COLOR MATERIAL 

901681 16-20 XL1200CX Ready To Paint ABS 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




Cut Out Front Fender 





FITMENT TEXT 

DESCRIPTION 

11-20 XL1200C, 13 XL1200C ANV, 13-16 XL1200CA, 13-17 XL1200CB 130/90-16 902116 

14-18 XL1200T, 05-20 XL883L, 20 XL 1200T, 05-06 XL(H)53C, 04-10 XL1200C, 04-09 XL883, 

04, 07 XL53C, 08-10 XL883C 

86-20 Sportster, except 05-20 XL883L, 11-20 XL1200C, 13-16 XL1200CA, 13-17 XL1200CB, 

10-20 XL1200X, 14-18 XL1200T, 16-20 XL1200CX, 06-10 XL1200L, 08-10 XR1200, 10-13 

XR1200X, 13 XL1200C ANV, 18 XL1200X ANX, 19-20 XL1200XS, 20 XL 1200T, 91-05 Dyna, 

except 93-03 FXDWG, 02 FXDWGSE3, 04-05 FXDWGI 









130/70-18, 120/70-18,130/90-16, 890587 

130/80-17 

100/90-19, 110/90-19 890623 

130/60R23, MH 90-21 890589 


DIY Front Fender 




Field of Application: For most Sportster, Dyna and Softail Models, in in conjunction with matching Mounting Parts , 

Color: Raw , Material: Steel , Unit: Each , Qty.: 1 

PART# 

DESCRIPTION 

685428 Width: 125mm, Arc Length: 420mm 


Show Polished 


Show Polished 

Mad Max Aluminum Front Fender 

Delivered in raw finish (to be polished or painted) 

893464 For10-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS 


REAR FENDER FOR SPORTSTER 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

892165 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Bobber Rear Fender for Sportster 

• 3D laser cut and handcrafted Steel Fenders 

• Made out of 2,5mm thick sheet metal 

• Rick’s products have a perfect fit and fine surface finish 

• Bolts onto OEM mounting points 

• For OEM tire and wheel dimensions 

• Fender struts have to be cut off 

• A optional solo seat mounting kit 916976 is available 

Part#: 916975 , Fitment: 10-20 Sportster, except 08-10 

XR1200, 10-13 XR1200X , Color: Raw , Material: Steel , 

Unit: Each , Qty.: 1 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Rick’s Rear Steelfender for Sportster 

• Steel fender with built-in struts 

• Made on special jigs to exact measurements 

• Perfect fitment, easy installation 

• Available for selected tire width below for 04-06, 10-20 

Sportster, except 10-13 XR1200X, 08-10 XR1200 

892163 For 200 mm tires 



Note: Kits above require swingarm modification! 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




607978 

607980 

607981 

607979 

Rick’s Fenders for Sportster 

Rear Fenders 

607978 Bobber fender long fiber 04-06, 10-20 

Sportster, except 10-13 XR1200X, 08-10 

XR1200 

607979 Bobber fender short fiber 04-06, 10-20 

Sportster, except 10-13 XR1200X, 08-10 

XR1200 

Front Fenders 

607980 Sportster ‚48‘ front fender fiber 

Bobber“, 10-20 XL1200X, 18 XL1200X 

ANX, 19-20 XL1200XS 

607981 Sportster ‚48‘ front fender fiber Street“, 

10-20 XL1200X, 18 XL1200X ANX, 19-20 

XL1200XS 


Rick’s Rear Fender Dirt Track 

Glass reinforced plastic XR 750 Dirt Track style fender 

Includes seat base plate, fender and mounting hardware 

Made in Germany 

890945 Rear fender, Dirt Track for 09-20 Sportster, except 08-10 XR1200, 10-13 XR1200X 





APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Short Style Rear Fender 




Fitment: 04-20 Sportster, except 08-10 XR1200, 10-13 

XR1200X , Color: Raw , Certification: With Approval , 

Position: Rear , Material: Steel , Unit: Each , Qty.: 1 

PART# 

DESCRIPTION 

890592 180 Tire, Width: 200 mm 

890593 210 Tire, Width: 230 mm 

TXT Strutless Rear Fender for Sportster Models 

These fenders are designed to be used with a 200-series tires on 5 

1/2"-wide rims. No modification of swingarm or offset kit is required. 

Requires the use of wheels and belt pulleys for 88-93 models. All 

Sportster fenders require wider swingarms. 

86996 Fender up to 180 rear tires for all Sportster models from 88-93 

(wide swingarm required CC #86111 or 86112) 

86997 Fender up to 210 rear tires for all Sportster models from 88-93 

(wide swingarm required CC #86111 or 86112) 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

DIY Bobber Rear Fender 





XR1200X , Color: Raw , Position: Rear , Material: Steel , 


PART# 

DESCRIPTION 

902095 For Evo with 130-150 Tires (155mm Wide) 

902096 For Evo with 160-180 Tires (175mm Wide ) 

Bobber Rear Fender 





XR1200X , Color: Raw , Certification: With Approval , 

Position: Rear , Material: Steel , Unit: Each , Qty.: 1 

PART# 

DESCRIPTION 

902093 For Evo with 130-150 Tires (155mm Wide) 

902094 For Evo with 160-180 Tires (175mm Wide ) 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




F. Kodlin Racing Rear Fender for Sportster 

The Racing rear fender is made of steel (no fiberglass) and can be used 

for rear tires up to 200 mm. Perfect match in combination with the F. 

Kodlin racing swingarm. Fits 04-20 Sportster, except 08-10 XR 1200, 

10-13 XR 1200X. Frame needs to be modified and converts the bike to 

a solo ride without a passenger seat! Seat base plates made of steel 

matching to Racing fenders are available separately. 

894345 Racing rear fender, steel 


Cafe Au Lait Rear End Conversion Kit 

• Including fiber seat base plate 

• Requires fender strut modifications 

Color: Raw , Description: Fibre Seat Pan , Material: Steel , 

Unit: Kit , Qty.: 1 

PART# 

FITMENT 

889786 86-93 Sportster 

889787 94-03 Sportster 

889788 04-20 Sportster, except 08-10 XR1200, 10-12 XR1200X 





APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

607600 607603 607601 

HAND 

CONTROLS 

Cult-Werk Rear Fenders for 04-06, 10-20 Sportster, except 10-13 XR1200X, 08-10 XR1200 

ABS made plastic rear fenders with accurate fit and ready to paint surface. They shorten the gap between rear tire and fender about 50 mm. 

607600 Rear fender “Bobber” 

607603 Rear fender “Bobber” black gloss 

607601 Rear fender “Bobber Short” 

LIGHTING 

ELECTRICAL 

923896 

EXHAUST 

Original Style Short 

923895 

Rear Fender 


• Black glossy (just remove protective film and the fender shines in original H-D black!) 


Fitment: 22-23 Nightster RH975, 23 Nightster Special RH975S , Material: ABS , Unit: Each , Qty.: 1 

PART# 

COLOR 


INTAKE 

ENGINE 

GASKETS 


893730 

607602 

TRANNY & 

CLUTCH 

893796 

893757 

Rear Fenders by Cult Werk for 04-06, 10-20 

Sportster, except 10 XR1200, 10-13 XR1200X 

Precision CNC made fenders of durable ABS, black glossy or in a 

‘ready to paint’ finish. Always check clearance of rear fender to tire 

space. 

Oldschool rear fender 

Reduces the gap between tire and fender approx. 50 mm and 

delivers a cool retro look without lowering the bike. 

893730 Old School rear fender ready to paint 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

607602 Old School rear fender, black 

Swingarm mounted rear fender 

893755, 893764 

This fender mounts to the swingarm and can be mount with a very 

mall gap between fender and tire. CNC made of durable ABS plastic. 

FORKS & 

SHOCKS 

893757 Swingarm mounted rear fender 

Rear fender kit, Cafe Racer 

Precision CNC made ABS plastic Cafe Racer rear fender with excellent 

fitment precision and retro styling. Ready to paint, the OEM splash 

guard stays in place. 

893796 Plain with leather 04-06, 10-20 Sportster, except 10 XR1200, 

10-13 XR1200X 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

893772 893773 

Rear fender kit, OEM style 

Precision CNC made ABS plastic OEM style rear fenders in short or 

long version. 

893755 Short OEM style fender, glossy black 

LUBRICANTS & 

CHEMICALS 

893764 Short OEM style fender, ready to paint 

893772 Long OEM style fender, glossy black 

893773 Long OEM style fender, ready to paint 

TOOLS & 

EQUIPMENT 




Short Seat Cowl 

893818 

895802 

Seat and Tail Section Cowl 

• Fiber glass 

• Black gel coated, ready to paint 

• 04-06, 10-20 Sportster, except 10 XR1200, 10-13 XR1200X 

893818 Cowl section with diagonal seat, blackv 

895663 

Vertical 

895664 

893094 


Cafe Tail Section 

• Has clearance for stock shocks, wheels & tires 

• Covered in Black Gel coat 

• Required removal of stock fender, supporting struts and seat 

• Requires relocation of taillight and turn signals 

• Fiberglass construction with stainless steel mounting brackets 

• All necessary mounting hardware included 

• Direct Bolt on to the RSD Café Tail Section 

• Ergonomic shape keeps rider seated comfortably & firmly 

• Controlled density polyurethane foam 

• Marine grade fiberglass baseplate 

• RSD metal logo 

895802 Tail Section, Cafe Sportster, 04-20 Sportster, except 08-10 XR1200, 

10-13 XR1200X 

Matching Solo Seats for Cafe Tail Section 

895663 Boss black for 04-20 Sportster, except 08-10 XR1200, 10-13 

XR1200X 

895664 Cafe, black for 04-20 Sportster, except 08-10 XR1200, 10-13 

XR1200X 

Viper 

Seat and Tail Section Gunfighter 

• Tail section with a variety of seats 

• Fiber glass 

• Black gel coated, ready to paint 

• 04-06, 10-20 Sportster, except 10 XR1200, 10-13 

XR1200X 

893094 Vertical Seat 

893093 





APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Cafe Seat and Taillight Bracket Kit 

• Seat material synthetic leather / urethane foam 

• Seamline is not waterproof 

PART# FITMENT COLOR 

FINISH 

DESIGN 

911444 04-06, 10-20 Sportster, except 08-10 XR1200, 10-13 XR1200X Black Diagonal Cafe 

MATERIAL 

Leather/Synthetic, 

Urethane 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

Cafe Racer Tail by DUB for Sportster 

Express the Racing Spirit of your Sportster with this tiny tail kit by Dub Performance! 1-piece tail including mudguard delivered with a solo seat 

pan. Fiberglass high quality and white gel coat finish. For 04-20 Sportster, except 08-10 XR1200, 10-13 XR1200X Sold each. 

619629 DUB Performance Sportster ‘Cafe Racer’ tail 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




688688 

688689 

690204 


Chopped and Stock Rear Fenders for Late 

Sportsters 

As seen on our Café Sporty! Turn your XL into a café racer, chopper or 

whatever you see fit. 

688688 Chopped rear fender for 04-06, 10-20 Sportster, except 08-10 

XR1200, 10-13 XR1200X 

688689 Stock rear fender for 04-06, 10-20 Sportster, except 08-10 XR1200, 

10-13 XR1200X 

Café Racer Tail Section by Burly 

The Sportster based Café Racer has become a style of its own, taking the 

classic look to new levels and doing it with a magic only a Harley can 

bring to the table. Yet, there’s one key part that has been conspicuously 

absent and that’s an authentic Café tail section. Not any more, as Burly 

Brand has crafted a unique seat/cowl designed to bolt right to your 

86-03 Sportster. Available in partially covered with paintable black gel 

coat as well as a full covered version. Requires removal of fender, supporting 

struts and relocation of taillight and signals. Includes mounting 

hardware for OEM electronics. 

690204 Café Sportster tail section partial cover 86-03 

888389 Café Sportster tail section partial cover 04-06 

888390 Café Sportster tail section partial cover 07-09, except 08-09 

XR1200 

888391 Café Sportster tail section partial cover 10-20 Sportster, except 10 

XR1200, 10-13 XR1200X 




FRONT FENDER FOR DYNA 

APPAREL 

Clubstyle Front Fender 

This short front fender from Cult-Werk fits all Harley-Davidson 

Dyna models with an 18 „& 19“ rim and a 49mm fork (Street 

Bob, Softail Standard & Low Rider). In addition, the fender also 

fits the Harley-Davidson Street Bob from the year of construction 

2018! It is shorter, narrower and clears the view of the front 

wheel. The part gives your Harley a clean, cool look and a very 

sporty look! This front fender is a 100% perfectly fitting ABS 

plastic part, NO cheap fiberglass! It therefore offers a 100% 

accuracy of fit! No adjustment work necessary! All holes and 

millings are milled on the most modern 5-axis CNC machining 

centers, so that the fender only has to be exchanged for the 

original fender. The part is TOP processed, fits perfectly and 

clears the view of the front wheel. Original fit - new design. 

Fitment: 06-17 Dyna, 18-20 FXBB, 20-23 FXST, 21-23 FXBBS 

, Fitment Note: For use with 18“ or 19“ Wheels only , 

Certification: With Approval , Position: Front , Material: 

ABS , Wheel /Tire ø: 18“, 19“ , Unit: Each , Qty.: 1 

PART# 

COLOR 


SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 


INTAKE 

ENGINE 






FAMILY FITMENT DESCRIPTION PART# 

Dyna 

Fitment neu, 06-17 Dyna, except 06 FXDWGI, 07-08, 10-12, 14-17 FXDWG, 

08-12, 14-17 FXDF, 09 FXDFSE, 10 FXDFSE2, 12, 14-16 FLD, 13 FLD103, 13 

FXDF103, 13 FXDWG103, 18-20 FXBB, 20-23 FXST, 21-23 FXBBS 

Dyna 06-17 Dyna, except 06 FXDWGI, 07-08, 10-12, 14-17 FXDWG, 08-12, 14-17 

FXDF, 09 FXDFSE, 10 FXDFSE2, 12, 14-16 FLD, 13 FLD103, 13 FXDF103, 13 

FXDWG103, 18-20 FXBB, 20-23 FXST, 21-23 FXBBS 














100/90-19, 110/90-19 696263 

120/70R16, 130/60(70)-16, 

120/60R17, 130/70R16 

687493 

130/60R23, MH 90-21 890599 

130/70-18, 120/70-18, 

130/90-16, 130/80-17 

696264 

MH90-21, 100/90R21 685378 


Dyna 09 FXDFSE, 08-12, 14-17 FXDF, 10 FXDFSE2, 13 FXDF103 130/70-18, 120/70-18, 685379 

130/90-16, 130/80-17 

Sportster, Dyna 86-20 Sportster, except 05-20 XL883L, 11-20 XL1200C, 13-16 XL1200CA, 13-17 130/60R23, MH 90-21 890588 

XL1200CB, 10-20 XL1200X, 14-18 XL1200T, 16-20 XL1200CX, 06-10 XL1200L, 

08-10 XR1200, 10-13 XR1200X, 13 XL1200C ANV, 18 XL1200X ANX, 19-20 

XL1200XS, 20 XL 1200T, 91-05 Dyna, except 93-03 FXDWG, 02 FXDWGSE3, 

04-05 FXDWGI 

Sportster, Dyna 86-20 Sportster, except 05-20 XL883L, 11-20 XL1200C, 13-16 XL1200CA, 13-17 

XL1200CB, 10-20 XL1200X, 14-18 XL1200T, 16-20 XL1200CX, 06-10 XL1200L, 

08-10 XR1200, 10-13 XR1200X, 13 XL1200C ANV, 18 XL1200X ANX, 19-20 

XL1200XS, 20 XL 1200T, 91-05 Dyna, except 93-03 FXDWG, 02 FXDWGSE3, 

04-05 FXDWGI 


GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


FRONT FENDER FOR DYNA 






FITMENT TEXT 

DESCRIPTION 

11-20 XL1200C, 13 XL1200C ANV, 13-16 XL1200CA, 13-17 XL1200CB 130/90-16 902116 

14-18 XL1200T, 05-20 XL883L, 20 XL 1200T, 05-06 XL(H)53C, 04-10 XL1200C, 04-09 XL883, 

04, 07 XL53C, 08-10 XL883C 













130/70-18, 120/70-18,130/90-16, 890587 

130/80-17 

100/90-19, 110/90-19 890623 

130/60R23, MH 90-21 890589 






Field of Application: For most Sportster, Dyna and Softail 

Models, in in conjunction with matching Mounting Parts , 


PART# 

DESCRIPTION 




16.16 



REAR FENDER FOR DYNA 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Wide Fenders for Dyna Models 06-17 

Perfect match to the wide drive swingarm kits by Rick’s. All fenders are tig welded and are measurement/fitment tested before they 

get shipped out! They are very strong because of integrated 10 mm fender struts and Approval tested for rider + passenger. Besides 

the 260 series rear version we offer also some more for 180 mm, 200 mm and 240 mm rear wheels. The OEM seat can be re-used and 

needs only a little modification. 

619422 Rick‘s Rear Fender for Dyna 180 




INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

890605, 890606 

WHEELS, TIRES 

& BRAKES 

Short Rear Fender 




Fitment: 99-17 Dyna , Color: Raw , Certification: With 

Approval , Position: Rear , Material: Steel , Unit: Each , 

Qty.: 1 

PART# 

DESCRIPTION 

890605 No Cut Out, 210 Tire 

890606 No Cut Out, 240 Tire 

Smooth Rear Fender 






Qty.: 1 

PART# 

DESCRIPTION 

890601 210 Tire, Width: 230 mm 

890602 240 Tire, Width: 270 mm 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



REAR FENDER FOR DYNA 

653937 

653938 







Qty.: 1 

Rocket Bob Voodoo Dyna 06-17 Fender Kits 

These fenders fits Dyna models 06-17 and are designed the 

length you see for the struts, however we also offer a + 70mm 

version to accommodate a 2up seat. Struts are CNC milled & 

pressed 10 mm plate, with inner blind holes so the fender 

mounts out of sight to keep a clean line. There is a captive nut 

on the fender to accept OEM seats or aftremarket seats. The rear 

cross brace plate is supplied with shims so that you can alter the 

height of the fender off the rear tyre. This means that if you 

lower your ride or change up to an 18“ wheel etc, the fender will 

adapt. 

653937 Rocket Bob Voodoo Fender Kit Std. RAW 

653938 Rocket Bob Voodoo Fender Kit +70 mm RAW 

PART# DESCRIPTION 

902097 For Evo/TwinCam with 130-150 Tires (160mm Wide) 

902098 For Evo/TwinCam with 170-200 Tires (205mm Wide ) 





Fitment: 91-17 Dyna , Color: Raw , Position: Rear , 

Material: Steel , Unit: Each , Qty.: 1 

Cafe Au Lait Rear End Conversion Kit 

• Including fiber seat base plate 

• Requires fender strut modifications 

Part#: 889789 , Fitment: 00-17 Dyna , Color: Raw , 

Description: Fibre Seat Pan , Material: Steel , Unit: Kit , 

Qty.: 1 

PART# DESCRIPTION 

902099 For Dyna Evo/TwinCam for 130-150 Tires (160mm Wide) 


902100 For Dyna Evo/TwinCam for 170-200 Tires (205mm Wide ) 


FRONT FENDER FOR SOFTAIL 

18“ Fat Boy Short 19“ FXDR/S 16“ Fat Bob 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

21“ Slim Deluxe Heritage Long 21“ Breakout Long 19“ Low Rider S 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Steel Front Fender for Softail Models 

• Available for various HD models short 

and long variant 

• Tight fit above the tire. 

• Great addition to every custom job 

• Shaped to tightly fit the radius of the 

front wheel 

• Manufactured from 2 or 2.5 mm steel 

• High torsional resistance 

• 3D laser cut, high precision fit 

• Smooth lines through perfect contour 



• Mounting holes pre-drilled 

• Raw finish 


FITMENT DESCRIPTION FITMENT NOTE DIM DIM PART# 

LENGTH MATERIAL 

THICKNESS 

18, 20 FXFBS 114, 18-20 FXFB, 19 FXFB 114, 21-23 

FXFBS 

For Fat Bob For 150/80 16 Tire 465 2 916704 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 Short Version for For 130/60-21 or 120/70-21 370 2 912603 

FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS Breakout 

Tire 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 Long Version for For 130/60-21 or 120/70-21 480 2 901698 

FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS Breakout 

Tire 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 For Breakout For 130/60-23 Tire 410 2 925287 

FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 

18-21 FLSL, 18 FLHCS 114, 18-21 FLHC, 18 FLHCS Short Version for Slim, For 120/70 21 and 130/60 389 2 916979 

114 ANV, 18-20 FLDE, 19-20 FLHC 114, 21-23 

FLHCS, 23 FLHCSANV 

Deluxe, Heritage 21 Tire 

18-21 FLSL, 18 FLHCS 114, 18-21 FLHC, 18 FLHCS Short Version for Slim, For 130/60-18 Tire 350 2.5 916707 

114 ANV, 18-20 FLDE, 19-20 FLHC 114, 21-23 


Deluxe, Heritage 

18-21 FLSL, 18 FLHCS 114, 18-21 FLHC, 18 FLHCS Short Version for Slim, For 130/90-16 Tire 350 2.5 901695 

114 ANV, 18-20 FLDE, 19-20 FLHC 114, 21-23 



18-21 FLSL, 18 FLHCS 114, 18-21 FLHC, 18 FLHCS Long Version for Slim, For 120/70 21 and 130/60 525 2 916978 

114 ANV, 18-20 FLDE, 19-20 FLHC 114, 21-23 


Deluxe, Heritage 21 Tire 

18-21 FLSL, 18 FLHCS 114, 18-21 FLHC, 18 FLHCS Long Version for Slim, For 130/60-18 Tire 450 2.5 916706 

114 ANV, 18-20 FLDE, 19-20 FLHC 114, 21-23 



18-21 FLSL, 18 FLHCS 114, 18-21 FLHC, 18 FLHCS Long Version for Slim, For 130/90-16 Tire 450 2.5 901696 

114 ANV, 18-20 FLDE, 19-20 FLHC 114, 21-23 



18 FLFBS 114 ANV, 18-20 FLFB, 18-20 FLFBS 114, 18 Short Version for Fat Boy For 160/60-18 Tire 350 2 912598 

FLFBS 114 ANX, 21-23 FLFBS, 23 FLFBSANV 

18 FLFBS 114 ANV, 18-20 FLFB, 18-20 FLFBS 114, 18 Long Version for Fat Boy For 160/60-18 Tire 445 2 901697 


18 FLFBS 114 ANV, 18-20 FLFB, 18-20 FLFBS 114, 18 For Fat Boy For 120/70 21 and 130/60 21 457 2 925284 


Tire,Mounting Kit 925286 

required 

18 FLFBS 114 ANV, 18-20 FLFB, 18-20 FLFBS 114, 18 For Fat Boy 

For 130/60-23 Tire, Mounting 457 2 925285 


Kit 925286 required 

19-20 FXDRS 114 For FXDR/S For 130/60-19 Tire 337 2.5 916669 

20-23 FXLRS, 22-23 FXLRST, 22 FXRST For Low Rider S For 110/90 19 Tire 383 2.5 918538 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



21“ and 23“ Front Fender Spacer Kit for Fat 

Boy 

• For Rick‘s 21“ and 23“ steel font fender for Fat Boy 


• Screws included 

Part#: 925286 , Fitment: 18 FLFBS 114 ANV, 18-20 FLFB, 18- 

20 FLFBS 114, 18 FLFBS 114 ANX, 21-23 FLFBS, 23 FLFBSANV 

, Color: Aluminium Satin , Unit: Kit , Qty.: 1 

Bobber Front Fender 

It‘s shorter, narrower and clears the view of the front wheel. No 

adjustment work necessary! All holes and millings are milled 

on the most modern 5-axis CNC machining centers, so that the 

fender only has to be exchanged for the original. 

Fitment: 18-20 FXBB, 20-23 FXST, 21-23 FXBBS , 

Certification: With Approval , Position: Front , Material: 

ABS , Unit: Each , Qty.: 1 

PART# 

COLOR 






• All drilling and milling are machined on the latest 5-axis CNC 

machining centers 


Fitment: 18-20 FXBB, 20-23 FXST, 21-23 FXBBS , 

Certification: With Approval , Material: ABS , Unit: Each , 

Qty.: 1 

PART# 

COLOR 



895495 917170 917169 917169 


PART# FITMENT COLOR DESCRIPTION WHEEL /TIRE Ø 



This front fender is shorter, narrower and makes the view of the front wheel free. In addition to 

account for the original metal holder. The mounting holes are designed as slots, so the fenders 

can be adjusted in height continuously so you can regulate the distance between. 

Certification: With Approval , Position: Front , Material: ABS , Unit: Each , Qty.: 1 

895495 13-14 FXSBSE, 14-17 FXSB, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 

ANX, 21-22 FXBRS 

914862 

Gloss Black 16“ 

895494 13-14 FXSBSE, 14-17 FXSB, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 Ready to Paint 16“ 

ANX, 21-22 FXBRS 

917170 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 Gloss Black OEM Wheel 18“ 

FLFBS, 23 FLFBSANV 

917169 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 Ready to Paint OEM Wheel 18“ 

FLFBS, 23 FLFBSANV 

914862 19-20 FXDRS 114 Ready to Paint OEM Wheel 19“ 

921627 20-23 FXLRS, 22-23 FXLRST, 22 FXRST Gloss Black 19“ 

921626 20-23 FXLRS, 22-23 FXLRST, 22 FXRST Ready to Paint 19“


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

895497 895496 901863 914863 

HAND 

CONTROLS 




Certification: With Approval , Position: Front , Material: ABS , Unit: Each , Qty.: 1 

PART# FITMENT FITMENT NOTE COLOR DESCRIPTION WHEEL /TIRE Ø 

895497 13-14 FXSBSE, 14-17 FXSB, 18-19, 23 FXBR, 18-20 FXBRS For 16“ Wheel. Gloss Black 16“ 

114, 18 FXBRS 114 ANX, 21-22 FXBRS 

895496 13-14 FXSBSE, 14-17 FXSB, 18-19, 23 FXBR, 18-20 FXBRS For 16“ Wheel. Ready to Paint 16“ 

114, 18 FXBRS 114 ANX, 21-22 FXBRS 

917172 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 

Gloss Black OEM Wheel 18“ 

114 ANV, 21-23 FLFBS, 23 FLFBSANV 

917171 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 

Ready to Paint OEM Wheel 18“ 

114 ANV, 21-23 FLFBS, 23 FLFBSANV 

914863 19-20 FXDRS 114 Ready to Paint OEM Wheel 19“ 

921629 20-23 FXLRS, 22-23 FXLRST, 22 FXRST Gloss Black 19“ 

921628 20-23 FXLRS, 22-23 FXLRST, 22 FXRST Ready to Paint 19“ 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Front Fender for Breakout Models 

• For 21“ Wheels 

• Raw steel 

• Unpainted 

Part#: 918332 , Fitment: 13-14 FXSBSE, 14-17 FXSB, 18-19, 23 FXBR, 18-20 FXBRS 114, 21-22 FXBRS , Field of Application: 

21“ Wheels (130/60 B 21 Tires) , Material: Steel , Unit: Each , Qty.: 1 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 





902112 





889101, 889103, 889105 

FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS 




14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 120/70R21, 130/60R21 889103 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 130/70-18, 120/70- 889101 

18,130/90-16, 130/80-17 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 140/70R21, 130/60 23 889105 

18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV 160/60-18 902110 

18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 19-20 FLHC 114, 21-23 FLHCS, 

23 FLHCSANV 

84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, 01-02, 

04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 


04-06 FXSTI, 11-12 FXS, 13 FXS 103 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 FLSTN, 01-06 

FLSTCI, 01-06 FLSTFI, 05 FLSTFSE, 05-06 FLSTNI, 06 FLSTFSE2, 06 FLSTI, 10-12, 14-17 FLSTFB, 12, 14-17 

FLS, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 13 FLSTF 103, 13 FLSTFB 103, 13 FLSTN103, 14-15 

































130/90-16 902112 

100/90R19, 130/80R18 696545 

120/70R16, 130/60(70)- 696542 

16, 120/60R17, 

130/70R16 

130/60R23, MH 90-21 890629 

130/70-17, 130/80-16, 696543 

130/60-18, 120/60-18 

130/70-18, 120/70-18, 696544 

130/90-16, 130/80-17 

MH90-21, 100/90R21 685377 

MT90/16 696541 


100/90R19, 130/80R18 696540 

120/70R16, 130/60(70)- 

16, 120/60R17, 

130/70R16 

696537 

130/60R23, MH 90-21 890635 

130/70-17, 130/80-16, 

130/60-18, 120/60-18 

130/70-18, 120/70-18, 

130/90-16, 130/80-17 

696538 

696539 

140/75R17 889113 

MH90-21, 100/90R21 685376 

MT90/16 696536 

Universal, Drill and Cut 890636


APPAREL 

SEATS & 

TOURING 






889102, 889104 

FOOT 

CONTROLS 

HAND 

CONTROLS 


14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 120/70R21, 130/60R21 889102 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 130/70-18, 120/70-18, 130/90- 889100 

16, 130/80-17 

14-17 FXSB, 13-14 FXSBSE, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 140/70R21, 130/60 23 889104 

18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV 160/60-18 902109 

18-20 FXBB, 18-20 FXLR, 20-23 FXST, 21-23 FXBBS 110/90-19 902113 

18-20 FXFB, 18, 20 FXFBS 114, 19 FXFB 114, 21-23 FXFBS 130/90-16 902114 

18-20 FXLR, 20-23 FXLRS, 22-23 FXLRST, 22 FXRST 110/90B19 926542 

18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 19-20 FLHC 114, 21-23 130/90-16 902111 


84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, 120/70R16, 130/60(70)-16, 86659 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 


84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, 130/60R23, MH 90-21 890627 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 

84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, 130/70-17, 130/80-16, 130/60- 86661 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 

18, 120/60-18 

84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, 130/70-18, 120/70-18,130/90- 86663 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 

16, 130/80-17 

84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, 130/80R18 86830 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 

84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, MH90-21, 100/90R21 685375 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 

84-89, 99-03, 07, 11-15 FXST, 87-98, 07-10 FXSTC, 98-03, 05, 07-09 FXSTB, 01-02, 04-06 FXSTBI, Universal, Drill and Cut 890628 

01-02, 04-06 FXSTI, 11-12 FXS, 13 FXS 103 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 100/90R19, 130/80R18 86831 

FLSTN, 01-06 FLSTCI, 01-06 FLSTFI, 05 FLSTFSE, 05-06 FLSTNI, 06 FLSTFSE2, 06 FLSTI, 10-12, 14- 

17 FLSTFB, 12, 14-17 FLS, 12 FLSTSE3, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 13 FLSTF 

103, 13 FLSTFB 103, 13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 120/70R16, 130/60(70)-16, 86660 





86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 130/70-17, 130/80-16, 130/60- 86662 




18, 120/60-18 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 130/70-18, 120/70-18,130/90- 86664 




16, 130/80-17 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 130/60R23, MH 90-21 890632 

FLSTN, 01-06 FLSTCI, 01-06 FLSTFI, 05 FLSTFSE, 05-06 FLSTNI, 06 FLSTFSE2, 06 FLSTI, 10-12, 

14-17 FLSTFB, 12, 14-17 FLS, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 13 FLSTF 103, 13 

FLSTFB 103, 13 FLSTN103, 14-15 FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 140/75R17 889112 




86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 MH90-21, 100/90R21 681272 




86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 14-17 FLSTF, 93-96, 05, 07-12, 14-17 






LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 







Field of Application: For most Sportster, Dyna and Softail 

Models, in in conjunction with matching Mounting Parts , 


PART# 

DESCRIPTION 



Steel Front Fender for Fat Boy Models 

Get the great Fat Boy look on your Heritage Softail model, 

or replace damaged fenders on Fat Boy models from 90-06. 

Replaces OEM 59139-89. 

78312 Steel Front Fender 

Cut-Out Front Fender Side Plates 

PART# FITMENT COLOR FINISH MATERIAL 

902132 

18 FLFB 

With Tires 160/60-18 

Raw 

Steel 

902134 

902138 

18 FLSL, FLDE, FLHC 

With Tires 130/90-16 

10-17 XL1200C/CA/CB 

With Tires 130/90-16 

Raw 

Raw 

Steel 

Steel 

Quickbob Front Fender 

This fender compliments our ever popular Quickbob and Fatbob 

rear fender kits. It fits 1980 and later FXST, FXSTC and FXWG 

models. 

699022 Quickbob front fender 

Front Fender Side Plates 


902131 

902133 

902135 


902136 

902137 

18 FLFB 

With Tire 160/60-18 

18 FLSL, FLDE, FLHC 

With Tire 130/90-16 

18 FXLR, FXBB 

With Tire 110/90-19 

18 FXFB 


10-17 XL1200C/CA/CB 


Raw 

Raw 

Raw 

Raw 

Raw 

Steel 

Steel 

Steel 

Steel 

Steel 

Front Fenders for Heritage Softail Models 

Replacement fender without holes and dimples for custom 

applications, i.e. early style fender tips. Heavy-duty braces are 

riveted to fender shell. Fits Heritage Softail models from 86-17, as 

well as all Fat Boy models when a full fender is desired. 

13251 Smooth-style fender 

Exact duplicate of Original Equipment fender with all holes and 

dimples for stock lighted fender tips as well as upper and lower 

trim. Heavy-duty braces are riveted to fender shell. Fits Heritage 

Softail models from 86-17, as well as all Fat Boy models when a 

full fender is desired. 

13255 Stock replacement fender (repl. OEM 59129-86) 


REAR FENDER FOR SOFTAIL 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Inner Rear Fender for Softail FXDR 

• 3D laser cut Steel Fenders 




• A optional rear turn signal and brake light mount is available 

Part#: 916681 , Fitment: 19-20 FXDRS 114 , Fitment Note: 

For use with 8“ Rim. , Color: Raw , Material: Steel , Unit: 

Each , Qty.: 1 

Bobber Rear Fender Short Version for Softail 

• Short Version without fender struts 

• No welding necessary. 

• Fender made from 2,5 mm steel. 

• Perfect contour and fitment. 

• Available in two versions for OEM tire sizes 150/16 and 200/17 

Fitment: 08-17 Softail , Color: Raw , Material: Steel , Unit: 


PART# 

FITMENT NOTE 

918533 Does fit with 150/80 16“ Tire 

918535 Does fit with 200/50 17“ Tire 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Bobber Rear Fender Long Version for Softail 

• 3D laser cut and handcrafted Steel Fenders 





PART# FITMENT FITMENT NOTE 

916682 18-20 FXBB, 18-20 FXLR, 18-21 FLSL, 18-20 FLDE, 18 FLHCS 114, 18-21 FLHC, 18 

FLHCS 114 ANV, 18-20 FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 19-20 FLHC 114, 19 

FXFB 114, 20-23 FXLRS, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 21-23 FXFBS, 22- 

23 FXLRST, 23 FLHCSANV 

916683 18-20 FXBB, 18-20 FXLR, 18-21 FLSL, 18-20 FLDE, 18 FLHCS 114, 18-21 FLHC, 

18 FLHCS 114 ANV, 19-20 FLHC 114, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 23 

FLHCSANV 

Does fit with tire up to 200mm with 16- 

18“ diameter 

Does fit with tire up to 200mm with 16- 

18“ diameter 

918534 08-17 Softail Does fit with 150/80 16“ Tire 

918536 08-17 Softail Does fit with 200/50 17“ Tire 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




Rear Fender Kit for M8 Softail 

• Bolt-On fender kit for Breakout and Fat Boy M8 Softail models with 180-200, 240 or 260 tires 

• Handcrafted from steel featuring integrated 10 mm fender struts 

• Available for different tire width 

• Suitable for passenger 

• Includes fitting GRP seat base plate 

• Includes stainless steel tailend mounting kit and hardware 

• With Approval 

Color: Raw , Certification: With Approval , Position: Rear , Material: Fibre Glass, Steel , Qty.: 1 

FITMENT 

18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 

114 ANX, 21-22 FXBRS 

18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 

114 ANX, 21-22 FXBRS 

18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 

ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 

FLFBSANV 

18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 

ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 

FLFBSANV 

18-21 FLSL, 18-20 FLDE, 18-20 FXBB, 18-20 

FXLR, 18 FXFB, 18-21 FLHC, 18 FLHCS 114 

ANV, 18 FLHCS 114, 18-23 FLSB, 19 FXFB 

114, 19-20 FLHC 114, 20-23 FXLRS, 20-23 

FXST, 21-23 FXBBS, 21-23 FLHCS, 22-23 

FXLRST, 22-23 FXFBS, 23 FLHCSANV 

FITMENT DESCRIPTION 

NOTE 

8“ rim With cover for closing gap 

between seat and tank 







6“ rim Without cover, gap between 

tank and seat remains 

LENGTH 180-200 TIRE 240 TIRE 260 TIRE 

600 901701 901702 

600 901703 

600 901704 901705 

600 901706 

675 912605 


Rear Fender Kit for Twin 

Cam Breakout 

• Seel rear fender kit matching to 

Breakout frames 

• Made with special welding jigs 

• Fender with built-in-struts 

• Comes with fender, seat pan, frame 

tank cover (between seat and 

tank), and stainless steel mounting 

hardware 

• Passenger approved 

890901 8”wide for 240 OEM tires for 

FXSB 13-17, FXSBSE 13-17 

890902 8” wide for 260 Metzeler tires 

for FXSB 13-17, FXSBSE 13-17 

890903 9” wide for 260 Metzeler tires 

for FXSB 13-17, FXSBSE 13-17 





APPAREL 

SEATS & 

TOURING 

901707 901707 

912606 

FOOT 

CONTROLS 

HAND 

CONTROLS 

901709 

901709 

912600 

LIGHTING 

912606 

ELECTRICAL 

901707/08/09 

EXHAUST 

Rear Fender for M8 Softail 

• Hand crafted from solid steel with integrated 10 mm struts 

• With or without integrated taillight. 

• Available for different tires. 

• Fit for passenger transport 

• Includes mounting hardware 


Color: Raw , Certification: With Approval , Position: Rear , Material: Steel , Unit: Each , Qty.: 1 

FITMENT 

18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18- 

20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 

114 ANV, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV 










FITMENT 

NOTE 

DESCRIPTION 

DIM 180-200 

LENGTH TIRE 

240 

TIRE 

260 

TIRE 

8“ rim Wide frame models 600 901708 901709 

8“ rim Wide frame models, 

integrated center tail 

light and 2 turn signal 

housings 

600 912600 912601 

9“ rim Wide frame models 600 912599 

9“ rim Wide frame models, 

integrated center tail 

light and 2 turn signal 

housings 

18-20 FXBB, 18-20 FXLR, 18-21 FLSL, 18-20 FLDE, 18 

FLHCS 114, 18-21 FLHC, 18 FLHCS 114 ANV, 18-23 FLSB, 

18-20 FXFB, 18, 20 FXFBS 114, 19-20 FLHC 114, 19 FXFB 

114, 20-23 FXLRS, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 

21-23 FXFBS, 22-23 FXLRST, 23 FLHCSANV 

6“ rim Narrow frame models 550 901707 

18-20 FXBB, 18-20 FXLR, 18-21 FLSL, 18-20 FLDE, 18 

FLHCS 114, 18-21 FLHC, 18 FLHCS 114 ANV, 18-23 FLSB, 

18-20 FXFB, 18, 20 FXFBS 114, 19-20 FLHC 114, 19 FXFB 

114, 20-23 FXLRS, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 


6“ rim Narrow frame models, 

integrated tail light 

housing 

600 912602 

550 912606 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

Seat Pan 

PART# FITMENT MATERIAL 

910643 

18-21 FLSL, 18-23 FLSB, 18-20 FLDE, 18-20 FXLR, 18-20 FXBB, 18-20 FXFB, 19-21 FLHC, 19-20 FLHC 114, 19 

FXFB 114, 20-23 FXLRS, 20 FXFBS 114, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 21-23 FXFBS, 22-23 FXLRST, 23 

FLHCSANV In combination with Ricks Rear Fender, 6“, 200 Tires 


GFK 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Shorty Rear Fender 

• Unpainted 

• Including mounting kit and struts 

• Fits to OEM Slim and Street Bob seat 

• With Approval (2 persons) 

Part#: 917433 , Fitment: 18-23 Softail, except 18-20 FLFB, 

18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 

18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 19-20 

FXDRS 114, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV , Field 

of Application: fits with Slim and Street Bob Seat or in 

combination with Fibreglass Seat Plate 917147 , Color: 

Raw , Material: GFRP , Unit: Kit , Qty.: 1 

Old School Rear Fender 






Part#: 921637 , Fitment: 18-20 FXBB, 18-20 FLSL, 20-23 

FXST, 21-23 FXBBS , Color: Ready to Paint , Certification: 

With Approval , Material: ABS , Unit: Each , Qty.: 1 

16 Original Style Short Rear Fender 


• Black glossy (just remove protective film and the fender shines 

in the original H-D black!) 


Fitment: 18-20 FXBB, 18-21 FLSL, 20-23 FXST, 21-23 FXBBS , 

Certification: With Approval , Material: ABS , Unit: Each , 

Qty.: 1 

PART# 

COLOR 



Old School Rear Fender Kit 






• Inklusive frame cover and „old school“ seat 

Part#: 921638 , Fitment: 18-20 FXBB, 18-20 FLSL, 20-23 

FXST, 21-23 FXBBS , Color: Ready to Paint , Certification: 

With Approval , Material: ABS , Unit: Kit , Qty.: 1 





APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

Racing 1-Seat Rear End Conversion Kit 

This Cult-Werk rear 1-seater conversion is an ABS plastic part and is CNC milled on modern 5-axis machining centers! The rear fender 

„Racing“ was optically very complex and the rear is characterized by an easy mounting procedure. All you have to do is remove the 

original rear section and replace it with our metal inner fender. Then the lighting in the rear fender needs to be wired and finally 

the ABS plastic part is screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction 

results in a very beefy look. 

• Includes fender base, fender cover, leather seat and mounting hardware 

Description: Solo version , Certification: With Approval , Position: Rear , Material: ABS , Unit: Kit , Qty.: 1 


917155 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Gloss Black 

917154 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Ready to Paint 

913227 18-19, 23 FXBR, 18 FXBRS 114 ANX, 18-20 FXBRS 114, 21-22 FXBRS Gloss Black 

895493 18-19, 23 FXBR, 18 FXBRS 114 ANX, 18-20 FXBRS 114, 21-22 FXBRS Ready to Paint 

917193 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV Gloss Black 

917192 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV Ready to Paint 

917152 19-20 FXDRS 114 Gloss Black 

914869 19-20 FXDRS 114 Ready to Paint 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




917159 913228 917194 

Racing 2-Seat Rear End Conversion Kit 

This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! The rear fender 

„Racing“ was optically very complex and the rear is characterized by very simple assembly. All you have to do is remove the original 

rear section and replace it with our metal inner fender. Then the lighting in the rear fender has to be wired and finally the ABS 

plastic part is screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction results in 

a very beefy look. 

• Includes fender base, fender cover, leather seat and mounting hardware 

Description: 2-Up version , Certification: With Approval , Position: Rear , Material: ABS , Unit: Kit , Qty.: 1 


917160 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Gloss Black 

917159 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Ready to Paint 

913229 18-19, 23 FXBR, 18 FXBRS 114 ANX, 18-20 FXBRS 114, 21-22 FXBRS Gloss Black 

913228 18-19, 23 FXBR, 18 FXBRS 114 ANX, 18-20 FXBRS 114, 21-22 FXBRS Ready to Paint 

917195 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV Gloss Black 

917194 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV Ready to Paint 

917153 19-20 FXDRS 114 Gloss Black 

914870 19-20 FXDRS 114 Ready to Paint 


240 Tire Rear Fender for M8 Breakout 

• For 240 rear tires 

• Raw steel 

• Unpainted 


• State of the art quality 

• Shown with air ride system 

Perfect match to: Gas 

Tank 918330! 

Part#: 918331 , Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 

18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 

114 ANX, 18 FLFBS 114 ANV, 21-23 FLFBS, 21-22 FXBRS, 23 

FLFBSANV , Certification: With Approval , Material: Steel , 






APPAREL 

SEATS & 

TOURING 

Short Rear Fender 


902079 




PART# FITMENT DESCRIPTION 

890634 08-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE 2 Cut Out, 200 Tire 

890647 08-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE 2 Cut Out, 260 Tire 

890649 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE, 08-11 FXCWC, 08 FXCW 2 Cut Out, 260 Tire 

902077 18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 18-20 FXFB, 18, 20 FXFBS 114, 18- 

20 FXLR, 18-20 FXBB, 19-20 FLHC 114, 19 FXFB 114, 20-23 FXLRS, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 


902075 18-19, 23 FXBR, 18-20 FLFB, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 

FLFBS 114 ANV, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV 

2 Cut Out, 210 Tire 


FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

DIY Short Rear Fender 




Color: Raw , Position: Rear , Material: Steel , Unit: Kit , Qty.: 1 

890611 902085 


890611 99-17 Dyna No Cut Out, 210 Tire 

890667 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE, 08 FXCW, 08-11 FXCWC 2 Cut Out, 260 Tire 

902081 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 

18 FLFBS 114 ANV, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV 


ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

902087 

FRAMES 

902087, 902088, 902089 

Smooth Short Rear Fender 






902087 18-19, 23 FXBR, 18-20 FLFB, 18-20 FXBRS 114, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 18 

FXBRS 114 ANX, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV 

902088 18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 18-20 FXFB, 18, 20 FXFBS 114, 18-20 

FXLR, 18-20 FXBB, 19-20 FLHC 114, 19 FXFB 114, 20-23 FXST, 20-23 FXLRS, 21-23 FXBBS, 21-23 FLHCS, 21-23 

FXFBS, 22-23 FXLRST, 22 FXRST, 23 FLHCSANV 

902089 18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 18-20 FXFB, 18, 20 FXFBS 114, 18-20 

FXLR, 18-20 FXBB, 19-20 FLHC 114, 19 FXFB 114, 20-23 FXST, 20-23 FXLRS, 21-23 FXBBS, 21-23 FLHCS, 21-23 

FXFBS, 22-23 FXLRST, 22 FXRST, 23 FLHCSANV 


No Cut Out, 

260 Tire 

No Cut Out, 

210 Tire 

No Cut Out, 

260 Tire 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



902062 902060 

New Line Rear Fender 






902054 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 3 Cut Out, 260 Tire 


902052 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, Non Cut Out, 260 Tire 


902058 18-23 Softail, except 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 3 Cut Out, 210 Tire 

114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 18-23 FLSB, 19-20 FXDRS 114, 21-23 FLFBS, 21-22 FXBRS, 

23 FLFBSANV 

902056 18-23 Softail, except 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS Non Cut Out, 210 Tire 


23 FLFBSANV 

890654 08-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Non Cut Out, 200 Tire 

890655 08-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Non Cut Out, 260 Tire 

Version V Rear Fender 






902076 18-19, 23 FXBR, 18-20 FLFB, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 

FLFBS 114 ANV, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV 

902078 18-23 Softail, except 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 

ANX, 18 FLFBS 114 ANV, 18-23 FLSB, 19, 23 FXBR, 19-20 FXDRS 114, 21-22 FXBRS, 21-23 FLFBS, 23 

FLFBSANV 



16 Smooth Rear Fender 




Fitment: 08-17 Softail, except 08-11 FXCWC, 08 FXCW, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE , Color: Raw , Certification: 

With Approval , Position: Rear , Material: Steel , Unit: Each , Qty.: 1 

PART# 

DESCRIPTION 

890631 200 Tire, Width: 230 mm 

890651 260 Tire, Width: 270 mm 





APPAREL 

SEATS & 

TOURING 

902059 890653 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

New Line Short Rear Fender 






902051 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, Non Cut Out, 260 Tire 


902053 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 2 Cut Out, 260 Tire 


902055 18-23 Softail, except 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS Non Cut Out, 210 Tire 


23 FLFBSANV 

902057 18-23 Softail, except 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 2 Cut Out, 210 Tire 


23 FLFBSANV 

890652 08-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE No Cut Out, 200 Tire 

890653 08-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE No Cut Out, 260 Tire 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

902101, 902102 902105, 902106 

FRAMES 







902101 84-07 Softail For Evo/TwinCam with 130-150 Tires 

(160mm Wide), without fender support 

braces 

902102 84-07 Softail For Evo/TwinCam with 170-200 Tires 

(205mm Wide ), without fender support 

braces 

902105 18-23 Softail, except 19-20 FXDRS 114, 18-20 FLFB, 18-20 FLFBS 114, 18-20 FXBRS 

114, 18-23 FLSB, 18-19, 23 FXBR, 18 FXBRS 114 ANX, 18 FLFBS 114 ANX, 18 FLFBS 


902106 18-23 Softail, except 19-20 FXDRS 114, 18-20 FLFB, 18-20 FLFBS 114, 18-20 FXBRS 

114, 18-23 FLSB, 18-19, 23 FXBR, 18 FXBRS 114 ANX, 18 FLFBS 114 ANX, 18 FLFBS 



For Milwaukee-Eight with 130-150 Tires 

(160mm Wide), without fender support 

braces 

For Milwaukee-Eight with 170-200 Tires 

(205mm Wide ), without fender support 

braces 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



902103, 902107 





Color: Raw , Position: Rear , Material: Steel , Unit: Each , 

Qty.: 1 


902103 84-07 Softail For Softail Evo/ 

TwinCam with 130-150 

Tires (160mm Wide), 

without fender support 

braces 

902104 84-07 Softail For Softail Evo/ 

TwinCam with 170-200 

Tires (205mm Wide), 


braces 

902107 18-23 Softail, except 19-20 

FXDRS 114, 18-19, 23 FXBR, 

18-20 FXBRS 114, 18-20 FLFB, 

18-20 FLFBS 114, 18-23 FLSB, 

18 FXBRS 114 ANX, 18 FLFBS 

114 ANX, 18 FLFBS 114 ANV, 

21-23 FLFBS, 21-22 FXBRS, 23 

FLFBSANV 

902108 18-23 Softail, except 19-20 

FXDRS 114, 18-19, 23 FXBR, 

18-20 FXBRS 114, 18-20 FLFB, 

18-20 FLFBS 114, 18-23 FLSB, 

18 FXBRS 114 ANX, 18 FLFBS 

114 ANX, 18 FLFBS 114 ANV, 

21-23 FLFBS, 21-22 FXBRS, 23 

FLFBSANV 

For Softail Milwaukee- 

Eight with 130-150 

Tires (160mm Wide), 


braces 

For Softail Milwaukee- 

Eight with 170-200 

Tires (205mm Wide ), 


braces 

CCE Custom Rear Fender for Softail models 

Raw, Unground Finish, Medium, 210 mm Tire, 220 mm 

Inner Width 

685382 00-06 Softail Carburator Models with 64mm Hole 

Distance 

685383 Softail T/C Injection Models 01-06 with 64mm Hole 

Distance 

685384 Softail T/C Injection Models 07-11 with 29 mm Belt, 97 

mm Hole Distance, 10 mm Offset 

685385 Softail T/C Injection Models 07-09 with 20mm Belt, 

97mm Hole Distance, Centered 

Raw, Unground Finish, Medium, 250 mm Tire, 270 mm 

inner Width 

685386 00-06 Softail Carburator Models with 64 mm Hole 

Distance 

685387 Softail T/C Injection Models 01-06 with 64 mm Hole 

Distance 

Raw, Ground Finish, Medium, 250 mm Tire, 270 mm inner 

Width, With Approval 

685397 Softail T/C Injection Models 07-09 with 20mm Belt, 

97mm Hole Distance, Centered 


Seat Shellfor M8 Models 

PART# FITMENT MATERIAL 

18, 19 FLFB, 18, 19 FXBR 

902127 

In combination with TXT rear fenders 

18, 19 FLSL, 18, 19 FLDE, 18, 19 FLFB, 18, 

902128 19 FLHC, 18, 19 FXLR, 18, 19 FXBB 

In combination with TXT rear fenders 

Steel 

Steel 

Shorty Rear Fender for 07-17 Softails 

This fender bolts right onto 07-17 Softails with a stock 200mm 

rear tire. We chose to leave the end like the “bobbed” look of 

a hinged fender with the back portion taken off but you are 

welcome to take a grinder to it and give it your personal touch! 

699899 Shorty Softail fender 



APPAREL 

SEATS & 

TOURING 

78345 

FOOT 

CONTROLS 

78347 

Replacement Rear Fenders for Softail Models 

Accurate reproductions of their Original Equipment 

counterparts. They’re pre-drilled for the fender struts and license 

plate mount, and have the taillight mount in place. They fit all 

Softail models from 86-96. Available with or without provisions 

for the turn signal bar. 

78345 Without mounting holes for turn signal bar (repl. OEM 

59596-89) 

78347 With mounting holes for turn signal bar (repl. OEM 

59126-86) 

240469 Vintage rear fender without taillight and turn signal 

mounts 

Custom Rear Fenders for Softail Models 

Early-style ‘reveal’ stamped in the rear tips. Installation requires 

the removal of 5" from the struts. Two decorative end caps are 

supplied to finish off the shortened struts. Fit all 5-speed Softail 

models from 86-99. 

13254 With no taillight mount 

Note: 97-99 models require modification and/or relocation of OEM fuse box. The stock turn 

signals must be relocated, and the saddlebags on FLSTC models cannot be reinstalled due to the 

shortened fender struts. Always be sure to check for fitment and clearance before painting. 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

86667 

TXT Fender Mounting Kits 

Includes polished stainless steel countersunk sockethead screws 

and polished billet aluminum countersunk washers. 

86667 Rear fender mounting kit 

86668 Front fender mounting kit for FX forks 

86669 Front fender mounting kit for FL forks 

686728 Rear fender mounting kit for 250 series rear tires 

Custom Rear Fender for Softail Models 

A duplicate of the fenders fitted to Heritage Softail models, but 

is smooth with only fender strut holes in it for custom taillights. 

It’s ready to use as a replacement item or for FX Softail models 

converting to full fenders. 

Note: 97 and newer models require modification and/or relocation of OEM fuse box. Always be 

sure to check for fitment and clearance before painting. 

13211 Fits all Softail models from 84-96 as a custom fender 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

696277 

696278 

Rear Fender Weld in Box 

Fitment: 84-17 Softail , Color: Raw , Position: Rear , 


PART# 

FITMENT NOTE 

696277 only for Carburator Models 

696278 only for Injector Models 

Frame Cover 

• Covers the frame section underneath the seat on Breakout/Fat 

Boy models. 

PART# COLOR FINISH MATERIAL 

902129 Raw Steel 

902130 Raw Steel 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



FRONT FENDER FOR V-ROD 

890786 

Rick‘s Front Fender for V-Rod 

• Fits models up with up side down fork 

• Only fits 18- Wheels, 130/60 18 front tire 

• Handcrafted from high-tensile GRP 

• Pre-drilled - matching stock mounting position 

• Integrated fork tube protection 

619414 Front fender 18“ V-Rod 12-17 with inverted front fork (upside-down) 

890785 

890786 

Custom Front Fenders for V-Rod 

• For all V-Rod models 12-17, Muscle 09-17 

• Plastic ABS 

• Black 

890785 V1 Font fender 

890786 V2 Font fender including steel mesh and longer mounting screws in black 



FRONT FENDER FOR V-ROD 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Front Fender GT by Cult Werk 

618454 Fits all 02-11 V-Rod, except 09-11 

VRSCF, 06-07 VRSCR 

Front fender Special with 

Mounting Screws 

• Side air intakes 

• Grid for gluing air inlets are provided 

• Including 6 mounting screws 

• Ready to paint 

LIGHTING 

ELECTRICAL 

Front Fender Racing by Cult 

Werk 

Made of high grade ABS plastic, no 

fiber junk! Perfect shaped with little air 

hood on top. The fender comes perfect 

pre-drilled as an easy bolt-on part. The 

mounting holes allow to set the height 

of the fender-to-tire clearance in the 

way you like it. To mount the fender we 

recommend the CW fender screw set (CCI# 

618474 or 618469). 

618476 Front fender Racing fits 02-11 

V-Rod, except 09-11 VRSCF, 06-07 

VRSCR 

Front Fender Special without 

Screws by Cult Werk 

Front fender ‚Special‘ with nice air flow 

openings. Made of ABS pre-drilled for an 

easy replacement. To mount the fender 

we recommend the CW fender screw set 

(CCI# 618474). Ready to Paint. 

618475 Fits 12-17 V-Rod, 09-11 VRSCF 

Fitment Note: For 09-17 VRSCF additional bracket of VRSCDX 

2012 required 

PART# 


FITMENT 

12-17 V-Rod, 

09-11 VRSCF 

Fitment 

Note: For 

09-17 VRSCF 

additional 

bracket of 

VRSCDX 

2012 

required 

COLOR 

FINISH MATERIAL 

Ready 

To 

Paint 

ABS 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



REAR FENDER FOR V-ROD | AIRBOX COVERS FOR V-ROD 

Rick‘s Short Cut Fender ‘RACE’ for V-Rod 

To push and support the race optic on V-Rod models Rick’s 

developed this ‘Race’ short cut fiber glas rear fender. It matches 

perfect the ‘Race’ airbox cover which is available separately. It 

has two air inlets which underlines the V-Rod design nicely. The 

kit includes a seat base plate and all needed mounting material. 

For models 02-06 we offer the 280 version only, models 07-17 

can be updatet with a 240 version for the OEM rear wheel or a 

version for 280 custom wheels. 

619411 For V-Rod models 07-17 with 240 rear wheel 

619413 For V-Rod models 07-17 with 280 rear wheel 

619412 For V-Rod models 02-06 with 280 rear wheel Rick’s Airbox Cover ‘Race’ for V-Rod 

This airbox cover is a perfect match to the short cut rear fender 

and makes it an easy job to totally modify V-Rods. Finest fiber 

glas construction with a perfect fit including all mounting 

materials and air filter cover. The air filter cover avoids a lean 

running engine what a lot of other airbox covers on the market 

not do. The OEM speedo can be re-used as integrated system 

inside the airbox cover which has a clean look at the handlebar 

riser section as side effect! 

619418 Airbox Cover Kit „RACE“ GFK V-Rod, except VRSCR, 

VRSCF 

Racing Rear End Conversion Kit 

• Includes fender base, fender cover, leather seat and mounting 

hardware 

• Solo Version 

• Material: ABS 



618457 07-17 V-Rod Ready To Paint 

18-19, 23 FXBR, 18 FXBRS 114 ANX, 

18-20 FXBRS 114, 21-22 FXBRS 

895493 

Ready To Paint 

Unterscheider: 1-seat conversion kit 

18-19, 23 FXBR, 18 FXBRS 114 ANX, 

913227 18-20 FXBRS 114, 21-22 FXBRS Black Gloss 


18-19, 23 FXBR, 18 FXBRS 114 ANX, 

913228 18-20 FXBRS 114, 21-22 FXBRS Ready To Paint 


18-19, 23 FXBR, 18 FXBRS 114 ANX, 

913229 18-20 FXBRS 114, 21-22 FXBRS Black Gloss 


2-Seat Conversion Kit for V-Rod 

• For all V-Rod models 07-17 

• Racing rear fender 

• Mounting kit 

• Seats included 

890788 2-Seat conversion kit 


AIRBOX COVERS FOR V-ROD 

APPAREL 

607441 

890792 

SEATS & 

TOURING 

FOOT 

CONTROLS 

607441 

890791 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

890783 

EXHAUST 

INTAKE 

618460 

890776 

Airbox Covers for V-Rod and Night Rod Special 

Made of ABS plastic and CNC machined with extremly precise fit. Speedo bracket included. 

• Fits V-Rod and Night Rod models 02-17 

• Plastic CNC crafted ABS 

• Black, ready to paint 

607441 Custom 

890791 Special 

890792 GT 

890783 Racing 

618460 Racing including flat air box top cover 

Air Filter Cover for V-Rod 

Air filter cover to be used with airbox covers above (except 618460 which comes as complete kit). Can also be used with most 

aftermarket airbox covers out there! 


• Black 

• Clips into the OEM position 

890776 Air filter cover 

890783 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



AIRBOX COVERS FOR V-ROD 

Racing Airbox Cover for V-Rod Muscle 

• Replacement for the stock air cleaner cover 

• ABS Plastic 

PART# FITMENT COLOR FINISH DESIGN MATERIAL 


09-17 VRSCF, 13 VRSCF105 

Use of 890776 Inner Air Filter Cover is recommended 

Ready To Paint Racing ABS 

Special Airbox Cover for V-Rod Muscle 

• Replacement for the stock air cleaner cover 

• ABS Plastic 



09-17 VRSCF, 13 VRSCF105 

Use of 890776 Inner Air Filter Cover is recommended 


ABS 

Custom Airbox Cover for V-Rod Muscle 

• Air filter cover sold separately 



09-17 V-Rod 

Sheeting with air cleaner cover is recommended to avoid possible damage to the 

engine 


ABS 



V-ROD 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Ram Air GT Cover by Cult 

Werk 

618455 Fits all V-Rod & Night Rod models 

02-17 

LIGHTING 

ELECTRICAL 

EXHAUST 

Tank Covers Racing by Cult 

Werk 

These covers hide the tank in a real cool 

way. Sold as set for both sides. Fits V-Rod, 

Night Rod, NRS and Muscle models 


07-17 

INTAKE 

ENGINE 

GT Gas Tank Covers for V-Rod 



• Black 

890772 Gas tank cover 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Ram Air Racing by Cult Werk 


02-17 

RBS Cooler Cover for V-Rod 

For our V-ROD customers, who want 

to achieve a spectacular style of their 

V-ROD bike, the RBS V-ROD cooler cover 

is the ideal supplement replacement of 

the original cover. The cover is made of 

aluminum and will be mounted with a 

high-grade steel mat which fits between 

the cooling slots. Trouble-free mounting is 

guranteed! The cover is available in rawaluminum 

or high polished black coating. 

683173 V-Rod cooler cover, black 

Racing Radiator Cover for 

V-Rod 



• Black 

• Includes brackets, brake master cylinder 

remains in its oem position 

890781 Radiator cover 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



FRONT FENDER FOR TOURING 

21“ Steel Front Fender for Touring Models 

• Produced tension-free in deep-drawing process 

• Material thickness: 2 mm 

• Fits 3,5 and 4 x 21“ with 130/60 21 or 120/70 21“ tires 

• Three lengths available: Standard, Street-Cut, Shorty 

• Extra strong torsional stiffness, very important for big front wheels 

• Delivery in raw / unpainted 

• Mounting holes pre-drilled 

• Fender spacer kits available separately 


Fitment: 14-23 Touring, 14-23 Trike , Color: Raw , Position: Front , Material: Steel , Wheel /Tire ø: 21“ , Unit: Each , Qty.: 1 

PART# DESIGN LENGTH MM 

923986 Standard 1075 

923987 Street-Cut 870 

923988 Shorty 457 

16• Available for Touring models from 2014 

Front Fender Mounting Bracket for 21“ Wheels on Touring Models 

• Fits the FLH fork in combination with Rick‘s 21“ front fender 

• No adjustment necessary 

• Screws included 

• Surface in black or machine finish 

Fitment: 14-23 Touring, 14-23 Trike , Position: Front , Material: Billet Aluminium , Unit: Each , Qty.: 1 

PART# 

COLOR 

924069 Aluminium Brushed 

924070 Black, Anodized 





APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Steel Front Fender for Touring Models 23“ & 

26“ 

This Fender matches big front wheels on Touring models. 

Additional reinforcements at the side sections avoids the torsion 

of the fender during the ride. 

619435 Touring steel front fender 23“ 87-23 Touring, 09-23 Trike 

642959 Touring steel front fender 26” 87-23 Touring, 09-23 Trike 

Note: Matching front fender adapters by Rick’s are available! 

26“ Daytona Front Fender for Touring 

• Steel 

• Not painted or drilled 

• Incl. mounting parts 

Color: Raw , Position: Front , Material: Steel , Wheel /Tire 

ø: 26“ , Unit: Each , Qty.: 1 

PART# 

FITMENT 

619565 09-13 Touring, 09-13 Trike 

917144 14-23 Touring, 14-23 Trike 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

890913 

901860 

TRANNY & 

CLUTCH 

890914 

Rick’s Front Fender Brackets 

Billet aluminum brackets to fit aftermarket front fenders on 

Touring models. 

890913 Black for 14-23 Touring, 14-23 Trike 

890914 Polished for 14-23 Touring, 14-23 Trike 

890915 Black for Touring models 87-13 

890916 Polished for Touring models 87-13 


This front fender is shorter, narrower and makes the view of the 

front wheel free. In addition to account for the original metal 

holder. The mounting holes are designed as slots, so the fenders 

can be adjusted in height continuously so you can regulate the 

distance between. 

Fitment: 14-23 Touring, 14-23 Trike , Certification: With 

Approval , Position: Front , Material: ABS , Unit: Each , 

Qty.: 1 

PART# FITMENT NOTE COLOR WHEEL /TIRE Ø 

901861 For 19“ Wheels. Gloss Black 19“ 



901860 For 19“ Wheels. Ready to Paint 19“ 



DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




901866 

Fat Stocker Front Fender 

• Stocker (Fat) full length front fenders for wide tire Baggers 

feature a smooth flowing custom design with a straight cut 

front to match your factory style 

• Each steel fender features a direct bolt-on design, specially 

notched sides and smooth flowing body lines for contoured 

curves seen from every angle 

• Offers a smoother ride & protects the front wheel from 

potholes 

• 8“ Wide, designed to fit 18“ x 5.5“ front wheels w/ 180mm 

tires 

• Made from a single sheet of premium quality steel, stamped & 

laser cut to perfection 

• Allows clearance for up to 14“ oversized brake rotors 

• Pair with Arlen Ness Smooth style fork boots for complete 

direct bolt-on installation 

• Note: Check fender fit and clearance prior to painting 



919433 14-23 Touring, 14-23 Trike Application includes radius 

body lines on side of fender 

919434 99-13 Touring, 09-13 Trike For proper clearance radius 


are not included 

901862 

16Approval , Position: Front , Material: ABS , Unit: Each , 





Fitment: 14-23 Touring, 14-23 Trike , Certification: With 

Qty.: 1 

PART# FITMENT NOTE COLOR WHEEL /TIRE Ø 







Pro Short Wide Front Fender 

• Pro Short front fenders for wide tire Baggers feature a 

performance inspired design with a short overall length 





potholes 


tires 







Part#: 919435 , Fitment: 14-23 Touring, 14-23 Trike , 

Fitment Note: Application include radius body lines on 

side of fender , Color: Raw , Material: Steel , Unit: Each , 

Qty.: 1 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

629730 

HAND 

CONTROLS 

Rapper Fat Front Fender 

• Rapper full length front fenders for wide / fat tire Baggers (FLT 

Touring Models) 





potholes 


tires 









919436 14-23 Touring, 14-23 Trike Application includes radius 


919437 99-13 Touring, 09-13 Trike For proper clearance radius 


are not included 

629731 

629732 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Fender Relocation Kit 

• Relocates the front fender on Touring models when using a 

21“ front wheel 

• 4-23 Touring, 14-23 Trike 

PART# COLOR DESCRIPTION MATERIAL 

906762 Black 

906763 Black 

For OE fork legs and 21 x 

3,5” front wheel 

For Arlen Ness Hot Legs 

and 21 x 3,5” front wheel 

Steel 

Steel 

629733 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

Custom Fenders for Touring 87-13 with 21x3.5” 

Wheels 

These versions of our popular front fenders come with some 

added width and extended mounting tabs to accommodate taller 

21” wheels on Touring models. Fitment must be checked before 

paint, recommended for 120/70-21 tires. 

629730 Forty 6” fender 

629731 Roller 6” fender 

629732 Steeler 6” fender 

629733 Tombstone 6” fender 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



REAR FENDER FOR TOURING 

891959 

891959 

891959 642962 

642962 


Rear End Conversion Kit „Rick Rod“ 

• Contains: 

• GFK rear fender +4,2“ down and +8“ rear stretch 

• Pre set for HD CVO taillights 

• 2 x GFK hard bags (for models 93-13): +4,2“ down and +8“ rear 

stretch 

• Bags complete with inner felt liner 

• 2 x storage bottoms inside 

• Hard bag lids needs to be re-used 

• OEM mounting hardware needs to be re-used 

642962 Rear End conversion „Rick Rod“ kit for Touring models 

09-13 

891959 Framed license plate base plate 180 x 200 mm, aluminium 

polished, including license plate light 

619439 Touring License plate bracket 180 x 200, with license 

plate illumination 

619440 CVO Style Touring LED Turn Signal/Taillight/Brake Light, 

dark smoke (NO Approval) 

619441 CVO Style Touring LED Turn Signals, amber (E-approved) 

619568 License plate base plate 180 x 200 mm, with tail light / 

license plate illumination, aluminium polished 



APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

Custom Rear Fender 

• Direct fit without modifications 


PART# FITMENT COLOR FINISH DESCRIPTION 

901839 14-23 Touring, 14-23 Trike Ready To Paint Plain Fender Kit without Turn Signals and Tail Light (no Picture) 

901840 14-23 Touring, 14-23 Trike Black Gloss Plain Fender Kit without Turn Signals and Tail Light (no Picture) 

901878 14-23 Touring, 14-23 Trike Ready To Paint Fender Kit including Turn Signals and Tail Light 

901879 14-23 Touring, 14-23 Trike Black Gloss Fender Kit including Turn Signals and Tail Light 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Wide Smooth 

Long Smooth 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FBI Fat Bagger Fenders 

Take your Fat Bagger to another level with the FBI Fat Fender Kits available in Long (ideal with extended bags) or Wide. To make 

ordering simple, we're offering kits including an unfinished composite fiberglass fender, a fender mounting kit and choice of FBI's 

flush-mounted lighting. Long fenders include cutouts for dual exhaust. 

FBI Long Fender Options 

641753 Long fender, no lighting cutouts, 96-08 

641759 Long fender for 09-13 Touring, no lighting cutouts 

FBI Wide Fender Options 

641756 Wide fender with no lighting cutouts, 96-08 

641762 Wide fender for 09-13 Touring, no cutouts 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




648025 653125 

653126 

653125 

Rear Fender Kits for Touring Models 

FLH/FLT Rear Fender Kits 

• New Bagger-Tail fenders from Arlen Ness are a direct replacement for the OEM fender on 02-08 Touring models. 

• Pre-drilled bolt-on fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags. 

• Fenders can be used with either a stock width rear tire or up to a 200mm rear tire. 

• Supplied with a Ness/RWD license/taillight assembly with turn signals that plug into the factory harness. 

• We recommend using the Bagger-Tail fender kit with Arlen’s ‘Big Bags’ and using the Duck-Tail fender kit with stock 

saddlebags 

653125 Bagger-Tail FLT fender kit, 09-13 FLT 

653126 Duck-Tail FLT fender kit, 09-13 FLT 

653127 Bagger-Tail FLT fender kit, 09-13 FLT, no exhaust 





FRONT FENDER FOR INDIAN 

APPAREL 

990211 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 







Fitment: 15-23 Scout, Certification: With Approval , 

Material: ABS , Unit: Each , Qty.: 1 

PART# 

COLOR 







Fitment: 15-23 Indian Scout , Color: Raw , Position: Front , 


FITMENT TEXT DESCRIPTION PART# 

15-23 Indian Scout 110/90R19 990213 

15-23 Indian Scout 130/90B16 990211 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 





Fitment: 15-23 Indian Scout , Color: Raw , Position: Front , 


FITMENT TEXT DESCRIPTION PART# 

15-23 Indian Scout 110/90R19 990214 

15-23 Indian Scout 130/90B16 990212 

Front Fender for Indian Chief 

• Front fender made of 2.5 mm thick steel (base material) 

• For the original 19 or 16 inch wheel with 130 tires 

• The fender impresses with its beautiful fit 

• Fastening material is included 

• Easy construction 

• 100% Made in Germany 

Fitment: 22-23 Chief Dark Horse, 22-23 Chief Bobber 

Dark Horse, 22-23 Super Chief Limited, 23 Chief, 23 Chief 

Bobber, 23 Super Chief, Color: Raw , Material: Steel , Unit: 


PART# 

DESCRIPTION 

921547 Short Version 

921548 Long Version 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



REAR FENDER FOR INDIAN 

Seat Shell 

Part#: 990210 , Fitment: 15-23 Indian Scout , Fitment Note: 

For use with TXT smooth rear fenders , Color: Raw , Unit: 



The „Bobber“ rear fender gives the Indian a narrower look and 

fits all Indian® Scout Bobber models from 2018. 

Fitment: 18-23 Scout Bobber, 21-23 Scout Bobber Twenty, 

23 Scout Bobber Sixty , Certification: With Approval , 

Material: ABS , Unit: Each , Qty.: 1 

PART# COLOR DESCRIPTION 

921535 Gloss Black Clear without Taillight 

921537 Gloss Black with Taillight 

921534 Ready to Paint Clear without Taillight 

921536 Ready to Paint with Taillight 


Smooth Rear Fender 




Fitment: 15-23 Indian Scout , Color: Raw , Certification: 

With Approval , Position: Rear , Material: Steel , Unit: Each 

, Qty.: 1 

Long Rear Fender for Indian Chief 

• Rear fender suitable for passenger riders 

• Including extra seat shell and fastening material 

• A compartment is integrated in the fender to store the control 

units 

• The original rear carrier is completely eliminated 

• The fender impresses with its shape and accuracy to fit 

• Easy bolt on 


• Fits up to 200 Tire 


Part#: 923707 , 22-23 Chief Dark Horse, 22-23 Chief Bobber 

Dark Horse, 22-23 Super Chief Limited, 23 Chief, 23 Chief 

Bobber, 23 Super Chief, 23 Sport Chief , Color: Raw , 


PART# 

DESCRIPTION 

990206 240 Tire, Width: 270 mm 

990207 200 Tire, Width: 230 mm 




REAR FENDER FOR INDIAN 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Stiletto Rear Fender for Indian Chief 

• Rear fender suitable for pillion riders 

• The original seat can still be used 

• A compartment is integrated in the fender to store the 

control units 

• The original rear carrier is completely eliminated 

• The fender impresses with its shape and accuracy of fit 

• Fastening material is included 

• Easy construction 

• Bolt on 


• up to 200 Tire 


Part#: 921549 , Fitment: 22-23 Chief Dark Horse, 22-23 

Chief Bobber Dark Horse, 22-23 Super Chief Limited, 23 

Chief, 23 Chief Bobber, 23 Super Chief, 23 Sport Chief , 

Color: Raw , Certification: With Approval , Material: Steel 

, Unit: Each , Qty.: 1 

Caferacer Rear End Conversion Kit 

• Including aluminum seat base plate 

• No frame modification required 

• Fits perfect in combination with OEM 150 tire 

Part#: 990260 , Fitment: 15-23 Indian Scout , Fitment Note: 

Bolts on OE mounting studs and utlizes original bolts and 

rubber , Color: Raw , Description: Aluminum Seat Pan , 

Material: Steel , Unit: Kit , Qty.: 1 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



CUSTOM 

924888 924887 

Bobber Rear Fender Blank 

• „Do it yourself“ fender blank 

• 2 mm material thickness 

• Deep drawn, stress relieved 

• Delivery in raw / unpainted 


Color: Raw , Material: Steel , Unit: 


FIELD OF 

PART# 

APPLICATION 

924887 Fits Tire Size 150/ 80/ 

R16 

924888 Fits Tire Sizes 200/ 50/ 

R18, 200/ 55/ R17, 200/ 

60/ R16 

LENGTH 

MM 

818 

842 


Roller 

Forty 

Tombstone 

Custom Steel Front Fenders 

Construction starts with two pieces of 

heavy-gauge steel which are formed and 

welded into shape. Finally, the fender 

is sanded and finished out, making it 

primer ready. Used by many of the top 

bike builders for their unmistakable style 

and superior quality. Designed for custom 

applications. Be sure to check installation 

and fit before painting. 

Custom Front Fenders 

Steel front fenders designed for custom 

applications. Be sure to check installation 


4 3/4"-Wide Fenders 

13794 ‘Forty’ 

13795 ‘Roller’ 

13796 ‘Tombstone’ 

Note: Always be sure to check for fitment and clearance 

before painting. 

6"-Wide Fenders 

11526 ‘Tombstone’ 

11531 ‘Roller’ 


CUSTOM 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

‘Diablo’ Custom Front Fenders 

Styled to draw attention anywhere 

you go. Made of 18-gauge steel and 

come undrilled for all types of custom 

applications. 

16952 4 3/4"-wide 

Note: CC #16952 is designed for low-profile 18" tires, standard 

profile 19" tires, and low profile 21" tires with an outside 

diameter of 28" or less. 

Custom Fender for Wide Glide 

Front Ends 

A bolt-on version that completely 

replaces the stock front fender on Dyna 

Wide Glide, Softail and 4-speed FXWG 

models from 80-06 (except Heritage 

Softail, Fat Boy and Springer Softail 

models). Styled with an added accent 

bead around its entire edge. These 

fenders include polished aluminum spacer 

blocks, and fit with 19" or 21" wheels 

only. May require drilling. 6” wide. 

Narrow Front Fender for FL 

Models 

Custom, unpainted steel narrow FXWGstyle 

front fender for all 4-speed FL 

model forks from 49-84. Includes chrome 

mounting brackets, the fender profile is 

designed to clear 18", 19" and 21" tires. 

26159 Narrow Front Fender 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

620101 

13183 Custom fender 

ENGINE 

GASKETS 

620102 

TRANNY & 

CLUTCH 

620100 

‘Dixie’ Fenders 

Fenders are made from 18 gauge cold 

rolled steel and are ready for fit and 

paint. 

Front Fenders 

620100 4 3/4"-wide 

620101 6"-wide 

Rear Fenders 

620102 7 1/4"-wide 

620103 9"-wide 

Note: Always be sure to check for fitment and clearance 


One-Piece Rear Fenders for FL 

Models 

Accurate reproductions of the one-piece 

rear fenders on 4-speed FL models from 

80-84. One version is smooth with no 

taillight or turn signal mounts, and the 

other has the 73-98 taillight mount (but 

no turn signal mounts). Fender strut 

mounting holes are already drilled. 

13189 With no taillight or turn signal 

mounts 

13212 With 73-98 taillight mount but 

no indentations for the turn signal 

mounting bar 


Custom Skirted Fender with 

Flip 

Based loosely on the skirted early K model 

front fender, this timeless classic has been 

updated to fit all 35mm and 39mm front 

forks from 73-19. Unpainted (5 3/4” wide). 

13196 Custom skirted fender 

Note: Fender should not be used on bikes equipped with 

highway bars. Always be sure to check for fitment and clearance 


13187 

Rigid Rear Fender for Big Twin 

Models 

An accurate reproduction of the rigid 

mounted rear fenders used on 36-57 

models. Fenders come unpainted and with 

brackets ready to bolt-on. 

13187 Fits 36-48 Big Twin models repl. 

OEM 59604-39 

Note: Always be sure to check fitment and clearance before 

painting. 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


CUSTOM 

Arc Length 

13377 

700 mm 

‘Mama Jama’ Steel Fenders 

A set of these custom fit at just the right 

angle and some sharp paint is about all 

that’s needed for a full-blown custom 

bike. 

Front Fenders 

13170 4 3/4"-wide fits 86-20 Sportster, 

except 10-20 XL1200X, 08-10 

XR1200, 10-13 XR1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 

19-20 XL1200XS, 71-84 FX Shovel, 

91-05 Dyna, 84-23 Softail, except 

19-20 FXDRS 114, 18-20 FXFB, 

19 FXFB 114, 18-23 FLSB, 20-23 

FXLRS, 18, 20 FXFBS 114, 16-17 

FXSE, 21-23 FXFBS, 22-23 FXLRST, 

22 FXRST, 85-23 Touring, 09-23 

Trike 

Note: CC #13170 is designed for low-profile 18" tires, 

standard profile 19" tires, and lowprofile 21" tires with an 

outside diameter of 28" or less. 

Custom Rear Fenders for 

Santee Rigid Frames 

Plain steel straps support the rear fender 

on your wide-tired Santee-framed 

chopper. 

180-Series Rigid Frames 

13377 8 1/2"-wide rear fender with 

plain steel strap supports 

16955 8 1/2"-wide without support 

200-Series Rigid Frames 

16956 9"-wide without support 

25933 25932 25931 

1100 mm 

560 mm 


26520 Springer front fender 


Springer Front Fender for Big 

Twins 

Accurate, faithful reproduction of the 

original fender. Complete with braces 

and fender edge ‘reveal’. Fits all Big 

Twins from 37-48. Replaces OEM 59000-36 

(measures 7 1/2” wide). 

Colony Front Fender Mounting Kit 

Cadmium-plated reproduction of the 

stock hardware used to mount Springer 

front fenders on 36-48 Big Twins. 

36105 Complete kit (replaces OEM 

59007-50) 

Rear Fenders for FX Models 

Detailed reproductions of the Original 

Equipment 4-speed FX rear fenders 

from 73-85. Available with or without 

mounting bracket for 73-98 taillight 

assembly. 

25931 Original style with light mount 

25932 Original style without mount 

25933 Custom bobbed, overall length 

41.5” 

Note: Taillight, visor and license mounting bracket are not 

included and are shown for illustration purposes only. Always 

be sure to check for fitment and clearance before painting. 

Front Fenders for 4-Speed 

Models 

Our replacement steel fenders fit all 

4-speed FL models from 81-84, and have 

all of the correct holes and dimples for 

fender trim and tip lights. 

240380 81-84 style (replaces OEM 59093- 

79) 

TXT Rear Fenders, Raw 

Thick rear fenders in raw steel to create 

your tail section of the bike. Available 

in different width and Arc Length. The 

Fenders are pre-heated and come with a 

solid wall thickness of 2,2 mm -3 mm for 

easy welding. The cut out fender pieces 

are from a 740 mm diameter unit. 

Arc Length 560, shaped 

The 560 shaped versions include a rear 

weld in reinforcement metal sheet (see 

560 image). 

890645 Width: 200 mm 

890644 Width: 270 mm 

Arc Length 700 

890637 Width: 230 mm 

890638 Width: 270 mm 

Arc Length 1100 

890640 Width: 230 mm

CUSTOM 

APPAREL 

SEATS & 

TOURING 

Roller 

FOOT 

CONTROLS 

Narrow Front Fenders 

These replacement narrow front fenders fit 

73-99 FX, FXR, 83-06 Sportster and 91-05 Dyna 

Glide models from with 35mm or 39mm front 

forks (except 93-05 FXDWG). Available chrome 

or unpainted with chrome brackets. For use 

with narrow 18", 19" and 21" rims. Replaces 

OEM 59031-83. 

240331 Chrome fender and bracket 

240383 Raw fender and bracket 

Tombstone 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Fenders for Narrow Glide Models 

Original-style front fenders for FX, FXR, 

Sportster and Dyna Glide models from 73-03. 

Unpainted and include chrome brackets and 

the rivets necessary to install them. 

19652 Fender (repl. OEMs 59007-73TB, 

59111-74) 

Manta Ray Smooth Steel 

Fender 

• High quality fender with a flared 

duckbill and subtle stamped branding 

• Radius fits 18“ tires as well as vintagestyle 

16“ tires 

Steel version 

895115 4-3/4” 

895114 6” 

895113 7” 

‘Desperado’ Rear Fender 

You may have noticed it’s simplicity yet 

distinctive design. This rear fender is truly 

one of a kind. 

• Measures 9"-wide with 400mm-radius 

• Especially made for 16" and 18" wheels 

• For up to 200 series tires 

• Made of raw, heavy 18-gauge steel 

699900 Desperado fender 

Custom Rear Fenders 

Wide to super-wide steel rear fenders 

are designed for custom applications. Be 

sure to check installation and fit before 

painting. 

‘Steeler’ 

13785 7 1/4"-wide 

13786 8 1/2"-wide 

13787 9"-wide 

‘Tombstone’ 

13788 7 1/4"-wide 

13789 8 1/2"-wide 

13790 9"-wide 

‘Roller’ 

13791 7 1/4"-wide 

13792 8 1/2"-wide 

13793 9"-wide 

Steeler 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

Stingray Fenders by Lowbrow 

The raised center rib, flared duckbill classic 

style at its best. 

INSTRUMENTS 

& GAUGES 

• Available in 4-3/4” and 6” widths 

• Radius fits 18” tires as well as vintagestyle 

16” tires. 

Steel version 

LUBRICANTS & 

CHEMICALS 

655846 4-3/4” 

655844 6” 

895112 7” 

TOOLS & 

EQUIPMENT 



CUSTOM 

Bobbed Rigid Rear Fender 

This new custom fender is beautifully made and includes the full set of brackets ready to bolt on to complete your restoration or 

custom build. Fits early rigid 45 cui models or custom applications. 

888782 Bobbed 45 cui rigid rear fender 

88175 

R. 13-3/8 

88178 

88175 Measures 10-1/2”-wide, accepts 16” wheels 


R. 15-3/4 

‘Roll-Your-Own’ Custom Blank Steel Fenders 

• Fabricate your own custom fenders with these blank steel fenders. 

• Made just for the custom bike builder or experienced metal-worker. 

• Permit you to cut, style and create your own front and/or rear fenders. 

• Raw steel finish in smooth-side and round-top versions. 

• Compatible with wheels from 16" up to 21". 

Smooth-Side Front Fenders with 13-3/8“ Radius 

Round-Top Rear Fenders with 13-3/8“ Radius 

88171 Measures 6”-wide, accepts 16” wheels 

Smooth-Side Rear Fenders with 13-3/8“ Radius 





Smooth-Side Rear Fenders with 15-3/4“ Radius 






88177 Measures 4-3/4”-wide, accepts 19” to 21” wheels 

88178 Measures 6”-wide, accepts 16” to 18” wheels 

Smooth-Side Front Fenders with 15-3/4“ Radius 

88179 Measures 7-1/4”-wide, accepts 16” to 18” wheels 






CUSTOM 

APPAREL 

SEATS & 

TOURING 

13531 

Long 

FOOT 

CONTROLS 

Medium 

Short 

8,5“ Classic Custom Style Rear 

Fender 

The durability of heavy-gauge.steel with a 

great custom look. 8,5“ Classic rear fender 

fit the full radius of the tire for that fat 

look. For custom installations fenders are 

not pre-drilled. Be sure to check installation 


13160 8 1/2"-wide rear 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

13530 

’OneTonHo’ and ’TwoTonHo’ 

Custom Rear Fenders 

Designed specifically for wide rigid 

frames. Fenders feature internal wiring 

loom and a belt cutout. The ‘TwoTonHo’ 

has built-in fender supports pre-drilled for 

turn signals while the ‘OneTonHo’ has no 

supports. 

13530 9"-wide ‘TwoTonHo’ 

13531 9"-wide ‘OneTonHo’ 

13526 8 1/2"-wide ‘OneTonHo’ 

13520 7 1/2"-wide ‘OneTonHo’ 

For Santee 200-Series Rigid Frames 

08680 9"-wide custom ‘OneTonHo’ 

Universal Flat Steel Rear 

Fenders 

Available in 6" width. Great for trailers too. 

12459 6" wide 

Fender Struts 

Universal Fenders, Fender 

Brackets and Struts 

Universal fenders in three lengths with 

matching fender brackets and fender 

struts. Now you can create your own 

custom rear fender to match your rear 

wheel. To mount the fender, choose the 

matching wide bracket and the correct 

length of fender struts (sold separately). 

88342 Fender 8 3/4"-wide (220mm), 

long version 

88343 Fender 8 3/4"-wide (220mm), 

medium version 

88344 Fender 8 3/4"-wide (220mm), 

short version 

88312 Fender 10 3/4"-wide (270mm), 

long version 

88313 Fender 10 3/4"-wide (270mm), 


88314 Fender 10 3/4"-wide (270mm), 

short version 

88389 Fender 11 1/8"-wide (280mm), 

long version 

88390 Fender 11 1/8"-wide (280mm), 


88391 Fender 11 1/8"-wide (280mm), 

short version 

88324 Fender struts, long 

88325 Fender struts, medium 

88326 Fender struts, short 

Fender 

Bracket 

88327 Fender mounting bracket 8 3/4"- 

wide (220mm) 

88328 Fender mounting bracket 10 3/4" 

to 11 1/8"-wide (270 to 280mm) 


‘Diablo’ Custom Rear Fender 

Styled to draw attention anywhere 

you go. Made of 18-gauge steel and 

comes undrilled for all types of custom 

applications. Struts not included! 

08694 7 1/4"-wide 

‘Two Eight’ 

Ultra-Wide Custom Fender 

Made of 18-gauge steel, these 10 1/2"- 

wide fenders fit Avon 230-250 series tires. 

Undrilled for custom applications. 

16951 10.5” - wide ‘Two Eight’ 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


210 Tire Fender Struts for Softail Models 

To build your own rear fender we offer fender struts in 8mm 

steel. They come straight to mount the fender in the center 

or with 10 mm offset bending for tires up to 210 mm. With 

the additional spacer steel plates #696283 you can create rear 

fenders with up to 240 mm. 


685475 

685476 


696279 84-06 Softail With 10 mm Offset, 210 Tire 

696281 07-17 Softail With 10 mm Offset, 210 Tire 

696280 84-06 Softail Without Offset, 210 Tire 

696282 07-17 Softail Without Offset, 210 Tire 

685478 

Custom Fender Struts 

Universal fender struts, made of 8mm German steel, laser cut 

and drilled. Available in three different designs matching to a lot 

of aftermarket parts for Softail and Dyna models. 

685475 Slim, for Softail models 07-17 

685476 Standard, for Softail models 07-17 

685478 Standard, for Dyna / Street Bob models 06-17 

CCE Custom Fender Struts Fit 220 mm and 270 

mm CCE Custom Fender For Softail models 

For 220 mm Fender 

685399 8mm Strong, Centered, with 64mm Hole Distance, 

Softail 84-06 

685400 8mm Strong, Offset, with 97mm Hole Distance, Softail, 

07-17 


Softail, 07-17 

For 270 mm Fender 

685402 8mm Strong, Offset, with 64mm Hole Distance, Softail 

84-06 


Softail 84-06 

685404 8mm Strong, Offset, with 97mm Hole Distance, Softail, 

07-17 

Adapter Plates For Use With 240 mm- 260 mm Tires 


685406 10mm strong, 67mm Hole Distance, 84-06 Softail 

Reinforcement For Weld In Box 

685369 T/C Injection Models 

Custom Fenderstruts for Softail 84-06 

684808 Fenderstruts slim, length from front hole to end tip 455 

mm 

684809 Fenderstruts standard, length from front hole to end tip 

525 mm 

Short Fender Struts Covers by Cult-Werk 

Short fender strut covers which are helpful whenever the rear 

fender struts got cut. Made of ABS plastic with precision for 04- 

20 Sportster, except 08-10 XR1200, 10-13 XR1200X 

642874 Short ABS fender strut covers 


26517 

APPAREL 

26518 

240071 

SEATS & 

TOURING 

FOOT 

CONTROLS 

26522 

Chrome Fender Strut Sets 

Chrome rear fender struts for 4-speed Big 

Twin, Sportster and K models from 54-86. 

All sets are formed from high-grade steel 

and pre-drilled with the correct mounting 

holes before polishing and plating. Can 

be used to mount custom, reproduction 

or Original Equipment fenders. 

Note: Hardware is not included. 

Fender Mounting Kit for 

Custom Wide Glide Front Ends 

This kit is designed to mount a stock type 

front fender on FX and XL models 73-83 

when the front fork has been converted 

for the Wide Glide “look” using the 

narrow glide tubes. 

240470 Complete kit 

893996 

Eagle Head Fender Ornament 

This die-cast fender ornament is highly 

detailed and come with illuminated 

eyes. The illuminated version is internally 

lit with 2 independent 12V light bulbs 

which can be connected to the turn 

signals or running lights. Fits FL, FLT and 

FLHT models 80-13 and many custom 

applications. 

240071 Illuminated eyes with gold 

accented beak 

330297 Replacement 12 volt bulb assembly. 

Fits CC# 240071. Sold in pack 

of 5 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

26517 Fit FX models from 72-85 – 2 

holes (not countersunk) 

26518 Fit FL models from 58-76 

78315 Fit FL models from 58-76 (turn 

signal holes have been removed) 

78319 Fit FXWG from 80-86 (turn signal 

holes have been removed) 

26522 Fit Sportster and K models from 

54-78 (turn signal holes have 

been removed) 

Fender Mounting Hardware Kits 

Complete chrome-plated hardware sets. 

26608 Fits CC #26518 or Original 

Equipment struts 

893995 

Front Fender Mounting 

Brackets 3-Point Slim 

• For 98-13 Road King , Road Glide, Street 

Glide 

• Pair 

893995 Chrome 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

Chrome Fender Struts for 

Softail Models 

These stock replacement struts fit all FL 

Softail models from 86-99. Replaces OEMs 

59964-86 and 59969-86. Sold in sets 

893996 Black 

Chrome Saddlebag Trim Rail 

Kit 

894952 For Touring models with hard 

saddlebags 87-13 (repl. OEM 

53662-87) 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

78303 Softail Fender Struts 

FORKS & 

SHOCKS 

Fender mounting kit Iron 

Cross 

685737 RR fender mounting kit Iron 

Cross, polished 30 mm 


Cross, polished 40mm 


Cross, black 30mm 


Cross, black 40mm 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



26589 

26588 

Vintage ‘V’ Style Fender Tips 

and Trim 

Reproductions of the chrome front 

and rear fender tips and stainless steel 

trim pieces. The fender tips are diecast 

in the ‘V’ design used as Original 

Equipment from 59-66. The front fender 

side trim and front fender lower edge 

trim are formed in stainless steel. Each 

part includes hardware, and fits all FL 

front fenders from 49-86 and all FL rear 

fenders from 58-86. 

26588 Front fender tip ‘V’ design 

(indexed for side spears) as used 

from 59-66 (repl. OEM 59216-59) 

26595 Front fender side spear set as 

used from 57-73 (repl. OEMs 

59205-57 and 59206-57) 

26589 Rear fender tip ‘V’ design as used 

from 59-66 (repl. OEM 59887-59) 

Kuryakyn Fender Accents for 

Touring Models 

The clean, unadorned fenders on the 

Road Glide, Road King Custom, Street 

Glide and many CVO Screamin’ Eagle 

Touring Models look sharp, but could use 

a little flash. Our classy fender tips are 

the perfect chrome complement to these 

clean fenders. 

605204 Front fender accent for all 86-23 

Touring models where the fender 

has no recess 

603455 

Chrome Front Fender Trim 

Fits narrow Wide Glide, Sportster and FXR 

style fenders. 

240540 Sold each 

777787 

609985 

603454 

609982 



Chrome Front Fender Trim 

Bumper 

Chrome front fender trim bumper for FLT 

93-Up models (except 98-Up FLTR and 

Trike models), replaces OEM 91085-83C. 

688660 Fender trim bumper fits FLT 

93-Up 

Chrome Fender Tips by 

National Cycle 

Sturdy, die-cast fender tips provide that 

classic look for front and rear fenders of 

many models. Jewel quality chrome finish. 

27437 Front of Front Fender Tip; Fits 

FLSTF models from 90-17 

27438 Rear Fender Tip; Fits FLSTF models 

90-06, FLSTS models 97 -05 

603454 Front Fender 2-Piece Tip Set; Fits 

FLSTF models from 01-17 


from 01-06 


07-17, FLSTFB 10-17, 16-17 

FLSTFBS 

603458 Front Fender 2 Piece Tip Set; Fits 

FXST/FXSTB/FXSTC/FXSTD from 

00-08, FXST from 84-90 & 99, 

FXSTS from 89-06, FXSTSB from 

95-97, FXSTC from 87-99, FXWG 

from 80-85, FXDG model 83 

603456 Rear Fender Tip; Fits FXST from 

06-07, FXSTB from 06-08, FXSTC 

models from 07-08 (MFG #N7042) 

603457 Rear Fender Tip; Fits FXSTD from 

00-07 models (MFG #N7043) 

Kuryakyn Chrome Fender Tips 

These fender tips add a nostalgic touch to 

any bike in seconds! Models are available 

to fit many Original Equipment H-D 

fenders. Simple installation requires no 

drilling, and can be done without any 

tools. A great way to cover dinged fender 

edges. 

Front Fenders 

609983 Front ‘leading edge’ fender tip 

for Fat Boy 90-17 

609984 Front ‘trailing edge’ fender tip 

for Fat Boy models 90-17 

609982 Narrow front fender tip 

Rear Fenders 

609985 Rear fender tip for Fat Boy 

models 90-06, except 06FLSTFSE 

777787 07-17 FLSTF, 10-17 FLSTFB, 17 

FLSTFBS & 06 FLSTFSE

APPAREL 

SEATS & 

TOURING 

Fender Tip Set 

PART# FITMENT COLOR MATERIAL POSITION 

913331 15-23 Scout, 16-20, 23 Scout Sixty Chrome Steel/Cast Steel Front 

913332 

15-23 Scout, 16-20, 23 Scout Sixty 

Scout 

Chrome Steel/Cast Steel Rear 

Fender, Seat Nut Kit 

• Fender/seat nut mounting kit replaces 

the plastic plug on Harley-Davidson 

models. 

PART# 

910641 Steel 

MATERIAL 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Chrome Lower Fender Trim 

A reproduction of the lower trim installed 

on FL models from 68-75, but completely 

chrome-plated without the black accents. 

Fits all FL, FLT, FLHT and FLHS models 

from 49-85. Comes complete with chrome 

mounting hardware. 

26585 Replaces OEM 59233-68 

Fender Extension for Narrow 

Front Fenders 

Enjoy a dryer ride, a cleaner engine and 

even sparkle! A molded-in contour hugs 

the stock H-D narrow fender tightly for a 

clean look. 

Fits: Most Narrow H-D Front Fenders on 

FXST, XL, Dyna & FXR Models 

779016 Front Fender Extension (ea) 

Steel “Round Bungs” and 

“Round Nuts” by Hell’s 

Kitchen Choppers 

These Round Nuts are CNC machined for 

use as Sissy Bar mounts, Fender mounts, 

Gas Tank mounts and a hundred other 

applications. Paint, Chrome or Powdercoat 

as desired. Every person putting a 

bike, or a street rod together needs a 

selection of these handy puppies on their 

workbench! Use along with the “Round 

Bungs” for allen head bolts also available 

in this catalog. Sold in Pairs. 

632701 Round Bung: 1/2” long, 1/2” 

O.D., 1/4” I.D. For 1/4” socket 

allen head bolts 


O.D., 5/16” I.D. For 5/16” socket 


632703 Round Bung: 3/4” long, 11/16” 

O.D., 3/8” I.D. For 3/8” socket 



O.D., 7/16” I.D. For 7/16” socket 


632693 Round Nut 1/4-20 UNC x 1/2 

632694 Round Nut 1/4-20 UNC x 1 

632695 Round Nut 5/16-18 UNC x 1/2 

632696 Round Nut 5/16-18 UNC x 1 

632697 Round Nut 3/8-16 UNC x 1/2 

632698 Round Nut 3/8-16 UNC x 1 

Chrome Rear Fender Strut 

Mounting Kits by Colony 

Kits include everything necessary for 

mounting fender struts. 

35165 For mounting four-hole struts 

on FL Softail models from 86-99 

(repl. OEM 59969-86) 

35164 For mounting six-hole struts on 

FX Softail models from 86-99 

(repl. OEM 59954-86) 

Colony Acorn Fender Rail 

Mounting Kit 

Fits Sportster and K models from 54-78 

and 4-speed FX models from 71-86. 

36184 Kit 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

Steel Iron Cross Plates by 

Hell’s Kitchen Choppers 

These cool Iron Crosses are water jet cut 

from 3/16” cold rolled steel. You can weld 

them on your sissy bar, use as brackets, 

make custom foot pegs or lots of other 

uses. Sold Raw. Paint, Chrome or Powdercoat 

as desired. Sold each. 

632690 Steel Iron Cross 1x1 

632691 Steel Iron Cross 2x2 


INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


THE LUCKY F*CKER 

CONVERSION KIT FOR TWIN CAM SOFTAIL 

641911 

600158 

BEFORE 

AFTER 

641904 

641907 


641903 

641905 

641900 


Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust.

THE LUCKY F*CKER 

CONVERSION KIT FOR TWIN CAM SOFTAIL 

APPAREL 

SEATS & 

TOURING 

The Lucky F*cker Conversion Kit for Twin Cam 

Softail 

Are you ready to turn your run of the mill, everyday Softail into 

something cool that will turn heads and grab attention? With 

the Lucky F*cker conversion kit, the transformation from stock 

to custom can be done easily and quickly. The Lucky F*cker 

kit consists of a custom gas tank, tank adapter, a solo seat kit, 

swingarm mounted ‘rigid-style’ rear fender and fender struts. 

These parts are as ‘bolt-on’ as you can get for a kit that will 

transform your bike as drastically as the Lucky F*cker will. Each 

part was designed to work together or can be used as standalone 

components, giving you the creative lead while building 

your custom vision without breaking the bank. 

Custom Gas Tank 

The Lucky F*cker tank is designed for easy ‘bolt-on’ installation 

when used with the tank adapter CCI #641905 (sold separately) 

on any 00-17 EFI or carbureted Twin Cam Softails or custom 

applications (EFI models requires the use of a Harley Davidson 

OEM fuel pump #75268-07D) 

641900 Lucky F*cker Gas Tank 

641906 Lucky F*cker Gas Tank for EFI Models 

641911 Lucky F*cker Indian Larry Style Dished Tank 3.5 Gal for 

EFI models 

600158 Lucky F*cker Cole Foster Bobber Tank for EFI models 

653105 Weld in plate for fuel pump 

641908 Lucky F*cker replacement gas cap 

653430 Fuel pump to be used with 641906 (repl. OEM 75268- 

07) 

653431 Fuel pump gasket for 653430 (repl. OEM 75301-07) 

653432 Fuel pump screw for 653430 (5 needed repl. OEM 

1081A) 

Softail Tank Adapter 

This part makes installing a custom gas tank onto your 00-17 

Twin Cam Softail as easy as removing the stock tank and bolting 

this adapter on. The adapter bolts-on to the stock mounting 

points and has a mount built into it for the OEM ignition switch. 

You can bolt the Lucky F*cker tank directly onto it or you can 

fabricate your own with the builders kit that will allow you place 

the tank mounts and ignition switch where-ever you like. 

641905 Lucky F*cker Gas Tank Adapter 

641910 Lucky F*cker tank adapter builders kit 

‘Rigid-Style’ Rear Fender & Struts 

The perfect way to give your Softail that ‘Old School’ rigid 

look. Designed to fit Softail models from 00-06 and custom 

applications. Installation of the fender will require the separate 

purchase of a set of chrome or raw fender struts or you can 

custom build your own. 

641907 Lucky F*cker 9” wide rigid-style fender (200 mm rear 

tires) Softail 00-06 

641901 Lucky F*cker 7.25” wide rigid-style fender (150 mm rear 

tires) Softail 00-06 

641902 Lucky F*cker rigid-style fender struts, chrome (pr) 

641903 Lucky F*cker rigid-style fender struts, raw (pr) 

Note: Swingarm needs welding! 

The Lucky F*cker Softail Solo Seat Kit 

The perfect accessory to the rigid fender kit since your stock seat 

will no longer fit. This seat completes the transformation of your 

Softail to a pure rigid-look. The seat is solid mounted to keep 

you as low to the ground as possible. Seat kit comes complete 

with a raw steel seat pan and all necessary mounting brackets 

and hardware. Designed to fit FX Softail models (except Deuce) 

from 00-06 and FL Softail models (except FLSTF 07-17) from 00- 

17. 

641904 Lucky F*cker Solo Seat kit 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

690900 

Universal EFI Mount Weld In Bracket for Gas Tank 

• Steel 

• For Sportster 07-20 fuel pump CCE #653430 

690900 Weld-in bracket 

FRAMES 

FORKS & 

SHOCKS 

921307 

921308 

Fuel Pump Plate Screw Kit 

High-quality replacement fuel pump plate screws from Twin Power. 

• O.E.M. style parts complete with sealing washers 

• 304 stainless-steel material 

• Replace each time the plate is removed 

Fitment Note: Only Fuel Injected Models , Unit: Kit , Qty.: 1 

PART# FITMENT OEM # 

921307 01-17 Softail, 02-07 Touring 1311D 

921308 04-17 Dyna 1331 

921309 04-20 Sportster 1081A 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Stretched Gas Tank for M8 Breakout 

• Stretched design 

• Raw steel 

• Unpainted 

• Includes a pop-up gas cap 

• Uses the OEM fuel pump (not included) 

• Capacity 12L 

Part#: 918330 , Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 

21-22 FXBRS , Material: Steel , Unit: Each , Qty.: 1 


7 Gallon Stretched Tank for Touring Models 

These new custom 7 gal stretched tanks bolt to the frame via stock mountings, the one 

piece steel construction has a curved bottom design to add that great custom look. 

They measure approximately 18“ wide x 25“ long and require a custom seat to be 

fitted. EFI version tanks come with a custom dash with hidden filler opening & accepts 

the stock OEM fuel-pumps. Carbureted version (not shown) comes with a center screw 

in type bung, gas cap sold separately. Hardware & rear mounting brackets included. 

629390 Stretched 7 gallon tank, no dash, screw bung fits carbureted Touring models 

96-06 

629391 Stretched 7 gallon tank, raw dash fits EFI Touring models 03-07 

629392 Stretched 7 gallon tank, raw dash fits 08-23 EFI Touring models 

629393 Chrome dash for EFI Touring tank 

603080 

PYO/Bagger Nation Custom 

Stretched Gas Tank for 

Touring Models 

Paul has created what he feels is the 

finest stretched tank design available. 

Flowing and elegant lines that perfectly 

compliment the stance of your Bagger. 

This tank is a 6 gallon one-piece stretched 

unit and if the tank wasn’t enough Paul 

also designed a custom steel dash with a 

cool pop-up gas cap for this tank. Tank 

kits include a 6 gal. tank, custom lowprofile 

steel dash, rubber trim and any 

necessary mounting brackets. Available 

for 03-Up EFI FLHT/FLTR models only.( 

Stock seat may need to be modified or 

custom seat has to be made ) 

603080 PYO/Bagger Nation stretched gas 

tank for 08-23 FHLT/ FLTR 

603081 PYO/Bagger Nation stretched gas 

tank for 03-07 FLHT/FLTR models 

Replacement Parts 

603082 PYO/Bagger Nation replacement 

stretched dash for 08-23 FHLT/ 

FLTR 

603083 PYO/Bagger Nation replacement 

stretched dash for 03-07 FLHT/ 

FLTR models 

603074 Replacement rubber gasket for 

603084 

603084 Replacement pop-up gas cap 

603077 Replacement hardware kit for 

603080 

603078 Replacement hardware kit 

(excluding filler neck) for 

603081 

603079 Replacement filler neck for 

603081 



APPAREL 

600154 600155 600157 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Custom ‘Bobber Style Gas Tanks’ by Cole Foster 

An absolutely beautiful new tank designed with the keen styling of Cole Foster - Salinas Boyz Customs. The tanks feature a mini 

pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames 

but can also be easily adapted to any custom application. They use the existing stock rubber mounts or are included as needed. Fuel 

capacity is 2.35 gallons. 

600158 Lucky F*cker Cole Foster Bobber Tank for EFI models 

600155 Fits Evolution Softail models from 84-99 and 4-speed FX and FL models and custom applications. 

Note: These applications require the front frame dash mount to be cut off and rear screw hole modified. 

600157 Fits carburated Twin Cam 88 Softail models from 00-06 

600154 Fits Sportster models from 82-03 

Replacement Gas Caps 

47775 Stainless Steel 


683620 Gas Cap Gasket 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



601298 

15639 

15602 

15296 

15696 


601297 

Custom One-Piece Stretched 

Tanks for Twin Cam Softail 

Models 

These tanks are stretched 2" and have all 

the tabs to mount your stock dash. They 

accept late model screw-in gas caps and 

also have provisions for the stock fuel 

gauge. They’re available for both fuel 

injected and carbureted models. 

601297 Fits carbureted Softail models 

from 00-03, 5 gallons 

601298 Fits fuel injected Softail models 

00-05 (except Deuce models, 

04-06 carbureted models) 

Note: All fuel tanks should be test fitted and pressure tested 

before painting. Installation of this tank may require a custom 

seat due to their longer lengths. 

Custom Smooth-Top Gas Tanks 

for FXR Models 

Our 2" stretch tanks are new stampings 

rather than using welded tips to achieve 

stretch. They come with flush-mount 

locking gas cap (included). Single cap 

tanks have inlet offset to the right side. 

Tanks fit all models from 82-99 and have 

a 4.0 gallon capacity. Models with stock 

turn signals mounted to the top triple 

tree must relocate them to avoid contact 

with the tank. 

15696 2" stretch with single flush locking 

cap 

15639 Replacement dual flush locking 

caps 

EFI Gas Tank for Softail 

Models 

Custom gas tanks with dash mount for 

Twin Cam EFI models 08-17. Can be used 

with the stock or stock style seats. Made 

from heavy gauge steel for years of 

leak and trouble free riding. Tanks are 

available for use with OEM style Screw-In 

gas caps and the gauge equipped OEM 

left side cap, as well as a model with our 

Quick Cam lockable gas caps on both sides 

of the tank. Tanks take approx. 5.1 gallon 

(19,3l). 

888796 Custom Softail EFI gas tank 

Fat Bob Style Gas Tanks 

Tanks are designed with accurate, 

precision-placed mounting plates and 

stud bosses. For increased durability, lowtemperature 

welding is used throughout 

the tank. Accepts either the dash for Low 

Rider models or the Fat Bob dash for FL 

and FXWG models. Features late 13/16" 

external-thread fuel valve connections for 

Original Equipment style gas valves (CC #’s 

25245, 25243) or high volume versions. 

Available to accept either pre-1982 camstyle 

gas caps or later model screw-in style 

gas caps. They are shipped with a dash 

spacer kit to accommodate the increased 

height. Fit all Original Equipment and 

aftermarket 4-speed Big Twin frames thru 

84 (except FXST models). 

Tanks with Cam-Style Bungs 

15289 3.5 gallon 

25549 5.0 gallon 

Tanks with Screw-Style Bungs 

15295 3.5 gallon 

15296 5.0 gallon 

15602 6.0 gallon 

Gas Tank Accessories 

25548 Rubber grommet with a steel 

insert for use in mounting Fat 

Bob tanks. Helps to isolate the 

tanks from vibration. Pack of 10 

(repl. OEM 11411) 

One-Piece Stretched Gas Tanks 

for Softail Models 

Smooth top gas tanks come with a single 

center-mounted 8 screw aircraft-style 

gas cap, and are stretched to 2". Made 

of heavy-gauge steel and inspected and 

pressure-tested to ensure quality as well 

as a perfect fit. Overall length- 20-1/2” 

x Width of tank- 16” x Height at tallest 

point- 14-1/4” x Tunnel Length- 18-3/4” 

x Tunnel Depth- 6-1/4” x Tunnel Width- 

3-1/8”. Holds about 4.2 gallons. 

15787 2" stretched, fits all Softail models 

from 84-99 

Note: This gas tank requires modifications on the seat or a 

custom seat due to the longer length. 



For 

reference 

only 

APPAREL 

SEATS & 

TOURING 

15676 

FOOT 

CONTROLS 

Custom One-Piece Smooth-Top 

Stretched Tanks for Softail 

Models 

Our 2" stretch tanks are new stampings 

rather than using welded tips to achieve 

stretch. They come with single flushmount 

locking gas caps (included), or 

for stock-style screw-in gas caps (not 

included). Single cap tanks have inlet 

offset to the right side. For the extreme 

custom Softail models, the 4" stretch 

tanks have welded wings on the 2" 

stretch tanks for the ultimate long, low 

look. Bike builders should note that these 

tanks, while simply bolting on stock tank 

mounts on the frame, will require minor 

finishing (especially with welded tip 

extensions), and probably a custom seat 

to fit the rear contours of the extended 

tank. Fit models from 84-99. 4.2 gallon 

capacity. 


cap 


cap 

1982-1996 

Screw-In 

Stretched Flatside Fat Bob 

Tanks for Softail Models 

Stretched tanks are one of the hottest 

custom bike trends. We start with our 

best selling 5 gallon tanks and weld on 

custom formed steel extensions. The 

extensions add over two inches to the 

length of the tank and create a smooth 

flowing look by filling the void between 

the seat and where the tank normally 

ends. Manufactured of heavy gauge 

steel on new tooling, each tank is hand 

inspected and pressure tested to ensure 

quality and a perfect fit. Designed for 

use with a stock dash, tank panel, late 

model (13/16" thread) petcock and 

most standard width seats. Available 

with bungs for 82-95 screw-in gas caps. 

Fit Softail models from 84-99 and most 

frames with mounts for flatside tanks. 

Gas caps must be purchased 

separately. 

46188 5 gallon Screw-in style cap, 

stretched tank 

Note: Stretched portion of tank does not hold fuel. Some 

wide or touring seats may require modification. All fuel tanks 

must be test fitted, pressure tested, and pre-sealed before 

painting. Tanks shown painted for illustration purpose only, 

tanks require finish body work. 

Flatside Gas Tanks with Screw- 

Type Gas Caps 

Designed to accept 82-95 screw in caps. 

Each tank is formed on all-new tooling to 

ensure quality. Tanks are designed to work 

with stock and most aftermarket frames 

with flatside brackets and single large 

diameter instruments, dashes, trim panels 

and 13/16" petcocks. Fit Softail models 

from 84-99 and most aftermarket frames 

with mounts for flatside tanks. 

Gas caps must be purchased 

separately. 

15297 3.5 gallon 

15298 5 gallon 

15294 6 gallon 

Note: Due to the slightly different contour of the 6-gallon 

tanks, flexible steel, leather or plastic tank panels should be 

used. All fuel tanks must be test fitted, pressure tested, and 

pre-sealed before painting. Tanks shown painted for illustration 

purpose only, tanks require finish body work. 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Fat Bob Gas Tank for FXR 

Models 

Classic Fat Bob look for all FXR models 

from 82-99. It has the appearance of split 

tanks, but is really a one piece welded 

tank with twin screw type filler necks, 

and 13/16" external thread gas valve 

fitting. Bolts directly to the stock mounts 

and accepts all FL-style dash assemblies 

(except Cateye) when the appropriate 

dash base is used. Included with each 

tank is a superflex speedo cable and a 

chrome tank divider panel (dash and 

speedo sold separately). The tanks are 

even equipped with internal emission 

control system connections, for use on 

vehicles WITH fuel tank emission devices 

(i.e., California models). 

25551 4-gallon Fat Bob gas tank for 

FXR models 

Note: CC #25551 tanks require removal of solder from 

vent tube prior to installation on vehicle when connecting 

fuel tank emissions control devices. 

3.5 Gallon Hand Shift Gas 

Tanks 

Two versions of the obsolete hand shift style 

3.5 gallon gas tank sets. Accurate placement 

of the shifter gate lugs and shut-off rod 

hole centers ensures trouble-free service. 

Available in two versions. One is a totally 

accurate reproduction of the original, rodstyle 

gas shut-off equipped tank used from 

48-65. The other is based on the same tank, 

but eliminates the early style gas shut-off rod 

system and replaces it with the tank bottom 

fitting for the late 13/16" external-thread 

petcock. Both tanks accept the correct camstyle 

gas caps and are designed to accept the 

stock shifter guide. (Sold separately.) 

25568 Original style with rod shut-off 

(shown) 

25569 Updated style with petcock M22 

x 1 


Detail of Gas Cap 

Custom Stretched Gas Tank 

• Uniquely-styled tank provides an 

affordable option in defining your 

ultimate hand-built custom chopper. 

• Features a long, tapered shape with a 

raised custom fuel bung. 

• Includes 5-bullet style cap. 

• Shipped with custom mounting brackets 

to weld to the frame. 

• Fuel capacity is approximately 3.5 

gallons. 

88120 Fits most aftermarket frames 

with a minimum of a 3" stretch 

in the backbone and a 4" stretch 

in the front downtubes (frame 

backbone diameters cannot 

exceed 2") 

689991 Replacement smooth pop-up gas 

cap 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


601800 

675704 

675705 

601803 

Pro Image I & II Chopper Gas Tanks 

The latest and greatest one-piece chopper gas tanks available! Fabricated from heavygauge 

steel with 4.1 or 4.7 gallon capacities. Compliments chopper frames with 4" 

downtube stretch and 3" backbone stretch. Backbone outer diameter cannot exceed 1 

3/4". Available with flush or raised cap. Includes rubber mounted weld-on brackets. 

Pro Image II Chopper Gas Tanks 

675704 4.1 gallon with flush cap, L - 23.5”, W - 12”, H - 10” 

675705 4.7 gallon with raised cap 

Special Flush Mount Pop Up Gas Cap 

675706 Fits CCI 675704, and 675705 

Stretched ‘Super Cruiser’ 

Steel Gas Tanks for Custom 

Applications 

• Made of heavy-gauge steel for 

maximum strength and durability. 

• Designed to use pop-up caps or bolt-in 

cap kits. 

• Tank must be fitted to frame before 

painting. 

• Available in a 3.5 gallon with 2" or 5" 

stretch. 

601800 3.5 gal. tank with 2" stretch 

made for pop-up cap, L- 23.5”, 

W- 13.5”, H - 9” 


made for bolt-in cap, L- 23.5”, W- 

13.5”, H - 9” 


made for pop-up cap, L- 25.25”, 

W- 14”, H - 8” 


made for bolt-in cap, L- 25.25”, 

W- 14”, H - 8” 

Custom Pop-Up Gas Caps 




Aircraft-Style Bolt-In Gas Caps 

Comes with mounting ring, gasket, screws 

and cap. 

08661 Chrome, Locking vented cap kit 

08660 Chrome, Non-locking vented cap 

kit 

XL Flat Bottom Sportster Tanks by Paughco 

Traditional Sportster tanks but modified for universal applications with horseshoe front 

mounts and tab rear mounts. They are equipped with a bung to accept late model 

22mm petcocks and screw-in style gas caps. Made in the USA. 

632933 XL Flat Bottom Gas Tank. 2.9 gals. 

Custom “Low Tunnel” Gas Tank 

This 2.8 gallon custom tank features a 1 1/2"-high tunnel with universal style mounts for 

custom applications. Accepts 3/8" NPT threaded petcock. Tank measures 15 1/2"-long x 

9"-wide x 7"-high with a 1 1/2" tunnel. 

260121 Unpainted steel (Bajonett) 

Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. 



APPAREL 

SEATS & 

TOURING 

19639 

FOOT 

CONTROLS 

‘Peanut’ Tank for Sportster 

Models 

A quality reproduction of the Original 

Equipment 2.4 gallon gas tank. 

12724 Fits early Sportster and K models 

from 55-78 

Note: All fuel tanks should be test fitted, pressure tested, and 

pre-sealed before painting. 

629446 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Smooth-Bottom Tanks for 

Sportster Models 

An updated design with a 3.3 gallon 

capacity and rounded lower edges. Very 

similar to the latest factory design, but 

with petcock locations and mounts for 

early or late frames. Includes mounting 

hardware. 


650246 

‘King’ Tanks for Early 


2"-wider than the ‘Standard’ tank... 

enough to give extra mileage and just 

wide enough to make them look great. 

These high tunnel tanks are equipped 

with stock mounts but do not include 

mounting hardware. They have a 3.1 

gallon capacity. 3/8" NPT Fuel Inlet. 

19639 Fits all models from 55-78 



Stretched 4 Gallon Tank for 

Late Sportsters 

If you are looking for more range or just 

want to set your Sporty apart from all the 

others this is the tank for you. Accepts 

the stock fuel pump, available with or 

without indents. Some seats may require 

slight modification (stock solo seat works). 

629446 Stretched 4 gal tank, screw bung, 

indented fits 07-20 Sportster, 

except 08-10 XR1200, 10-13 XR 

1200X 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Rubber Mounted 'King' Tank 

for Sportster Models 

Classic good looks of the original ‘Peanut’ 

tank, but with increased capacity for an 

extended cruising range. We took our 

best-selling 3.25-gallon capacity ‘King’ 

tank and added rubber mounts to the 

front and rear. By isolating the tank, 

we’ve reduced stress on the tank mounts 

for increased durability. Require vented 

screw-type gas caps. 


Fat-Bob Style Tanks For 04-06 

Sportsters 

Stock replacement tank for 04-06 

Sportster models with rubber mounted 

engines. They feature an offset, stockstyle 

screw in with vent and have a 

standard 22mm external thread petcock 

installed on the left side. Each tank 

includes threated hose line fittings for the 

vent bung on the bottom right-side of 

the tank. They attach to the stock frame 

mounting points and have a 4,5 gallon 

capacity. 

653129 4,5 gallon gas tank (gas cap not 

included) 

Stretched One-Piece Fat 

Bob Gas Tanks for Sportster 

Models 

• Features a 2"-stretch 

• 3.5 gallon capacity 

• Available in smooth-top versions ONLY 

• Single or dual screw-in caps (not 

included) 

• Single or dual flush aircraft-style caps 

with locks are included 

Smooth-Top for Late Models 

Fit all Sportster models from 82-03 (except 

XL1200S models). 

15673 With a single screw-in bung 

15218 With dual flush locking caps 

15219 With a single flush locking cap 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



629440 

629442 

EFI Tanks for Late Sportsters 

Whether you need to replace a damaged tank or just want to add some style to your ride, we have the tank for you. These tanks 

accept the stock fuel pump and come with or without indents and are available with OEM style screw in caps (sold separately) or our 

raised custom cap (included). Fits 07-20 Sportster, except 08-10 XR1200, 10-13 XR1200X. 

629440 EFI 3.3 gal OEM style tank, screw bung 

629441 EFI 3.3 gal OEM style tank, custom cap 

629442 EFI indented 3.3 gal OEM style tank, screw bung 

629443 EFI indented 3.3 gal OEM style tank, custom cap 

651445 


Dished and Axed Custom Gas Tank for 07-20 EFI Sportster 

Dished ‘Old-School’ gas tanks with the appropriate OEM-style mounting brackets to fit fuel-injected Sportster models 07-20. Perfect 

look with more capacity. These single cap tanks have the late stock-style screw-in filler necks. Re-use your OEM fuel pump assembly 

on the 07–20 tanks. 

PART# CAPACITY LENGTH WIDTH DEPTH TUNNEL 

LENGTH 

TUNNEL 

DEPTH 

TUNNEL 

WIDTH 

651445 3.5-gallons 16” 12” 9” 16” 2¾” 3¼” 23” 

893633 5.0-gallons 19” 13½” 9” 19” 2¾” 3¼” 23” 

CENTERLINE HOLE-TO-HOLE ON MOUNTING 

BRACKETS 



APPAREL 

SEATS & 

TOURING 

894882 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Legacy Steel Custom Gas Tanks 

894879 With right hand bung and 3 piece weld on mounting 

bracket kit for custom build applications 

894880 With center bung for XL 04-06 carbureted models 

894881 With right hand bung for XL 04-06 carbureted models 

894882 Legacy gas tank black rubber knee pads (1 pair) 

632930 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

3.3 Gallon Mustang Tank 

This one piece tank is perfect for a variety of custom 

applications. It has rounded mounting plates front and rear that 

are welded in place. It features a twin cap look, but the left neck 

is non-functional, for appearance only. The 3.3 gallon capacity 

tank fills on the right-side only. Tunnel measures 2 1/2"-high x 2 

3/4"-wide. Tank measures 18 1/2"-long x 12"-wide. 

260143 Unpainted steel, 3.3 Mustang Tank 

632931 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Mustang Gas Tank with Pop-Up Cap 

Comes with a center-mounted single “pop-up” gas cap and has a 

capacity of 3.3 gallons. Tank measures 16 1/2"-long x 11"-wide at 

widest point. Total length from tip-to-tip of mounting brackets is 

approximately 20". Tunnel is approximately 2 3/4"-wide x 2 1/2"- 

deep. Features a 3/8" NPT gas outlet (use CC #’s 12726 or 12727 

petcocks) on the center of the bottom right side as well as two 

1/4" gas outlets (use CC #’s 632252 petcocks) on both sides near 

the rear of the tank to be used as a crossover line or, for multiple 

choices in routing your gas lines. Petcocks sold separately. 

632165 Mustang tank with pop-up cap 

Special Flush Mount Pop Up Gas Cap 

675706 Fits CCI 675704, and 675705 

“Mini Mustang” Gas Tanks by Paughco 

These small gas tanks look awesome! Great lines, and only 16 

1/2” long, 9” wide and 7” deep. For custom applications with 

2 mounting styles available. The Narrow “Mini Mustang” tank 

has a capacity of 2.4 gals., with tunnel measuring 2 1/4” wide x 2 

1/2” deep and front/rear mount tabs. Total length tab center to 

tab center is 17”. The Frisco “Mini Mustang” tank has a capacity 

of 2.2 gals. and features a Frisco style front mount. Tunnel 

measures 3” wide x 1 1/2” deep, and total length tab center 

to tab center is 15 1/2”. Both tanks have 2, 1/4” NPT petcock 

outlets; petcocks sold separately. Made in Nevada, USA by the 

crew at Paughco. 

632930 “Mini Mustang” Gas Tank. Narrow. 2.4 gals. 

632931 “Mini Mustang” Gas Tank. Frisco. 2.2 gals. 

632252 1/4” NPT Petcock. No reserve. 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



651242 

3.1 Gallon Laredo Ribbed Gas Tank with Rh 

Screw Bung 

Tanks hold 3.1 Gallon (11.5L), are 17“ (43cm) long, 11 1/2“ (29 

cm) wide, have a 2“ (5 cm) wide low tunnel and a 3/8 NPT right 

center petcock opening, as well as rear left and right 1/4 NPT 

connections. Has universal brackets that makes it easy to mount 

it to almost any stock or custom frame. These are made from 

heavy gauge steel. 

Part#: 919733 , Description: With right side bung for 83-17 

screw-in style gas cap , Unit: Each , Qty.: 1 

651243 

Extra-Wide Custom Mustang Tank by Paughco 

This tank features a low tunnel with either straight or a 

horseshoe style mounting tabs, single early cam style gas cap 

with dual 1/4” treaded fuel outlets and will require the use of a 

1/4” aftermarket petcock (sold separately). Made in the U.S.A. 

651242 3 gallon Extra-wide Mustang tank with single gas cap 

and straight mounting tabs both front & rear 

651243 3.4 gallon Extra-wide Mustang tank with single gas cap 

and horseshoe front mount and straight tab rear mount 

651258 


PART# 

919732 919731 

3.1 Gallon Laredo Gas Tank 

Tanks hold 3.1 Gallon (11.5L), are 17“ (43cm) long, 11 1/2“ (29 

cm) wide, have a 2“ (5 cm) wide low tunnel and a 3/8 NPT right 

center petcock opening, as well as rear left and right 1/4 NPT 

connections. Has universal brackets that makes it easy to mount 

it to almost any stock or custom frame. These are made from 

heavy gauge steel. 


DESCRIPTION 

919732 With center bung for 83-17 screw-in style gas cap 

919731 With right side bung for 83-17 screw-in style gas cap 

One-Piece Stock Replacement Gas Tanks for 

Sportster Models by Paughco 

These 4.2-gallon tanks will bolt right to the stock frame mounts 

on 82-03 Sportsters and are available with either an early camstyle 

or screw-in style gas cap bung. Tanks are set up on the 

left-side with a 22mm external threaded fuel bung. Made in the 

U.S.A. 

Tanks with screw-in gas cap 

651257 4.2-gallon one-piece tank with single screw-in gas cap 

for 82-94 XL models 

651258 4.2-gallon one-piece tank with single screw-in gas cap 

for 95-03 XL models 



APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Axed 4 Gallon Single Cap Custom Gas Tank 

This tanks features a low tunnel with a horseshoe style front 

mounting tab and tab style rear mount, single early cam style 

gas cap with threaded fuel outlet on the left-side for a standard 

3/8” NPT petcock (sold separately). Made in the U.S.A. 

651244 4 gallon Axed Custom tank with single gas cap 

Narrow “Mustang” Style Tank 

This sleek looking gas tank features dual bung type caps, holds 

2.2 gallons of gas and measures 16 1/2” long, 9” wide and 7” 

deep. Tunnel is 2 1/2” wide x 2 1/4” deep. Center line hole-tohole 

on mounting tabs is 17 1/2”. Tank has two 1/4” gas outlets 

(use our #632252 petcock). This is a sweet looking tank and goes 

great with narrow springers or our girder set-up. Gas caps and 

petcocks not included. Made in USA by Paughco. 

651241 2.2 gal single cap narrow mustang tank 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

651253 

INTAKE 

ENGINE 

651254 

Mustang and Axed Custom Gas Tanks for 95-03 

Sportsters 

Bolt right to the stock frame mounts on 95-03 Sportsters. Gas 

tanks have an early cam-style gas cap bung. Made in the USA. 

Fits Sportster Models from 95-03; with a 22mm threaded 

fuel bung on the left-side of the tank 

651253 4.2-gallon Axed Style Custom tank with single gas cap 

for 95-03 XL 

651254 3-gallon Mustang Style tank with single gas cap for 

95-03 XL 

“Wasp” Custom Chopper Gas Tank 

Building a trick chopper but haven’t found the prefect tank for 

it yet? Look no further! This 2.2 gallon tank with it’s tear drop 

shape is perfect for any retro scoot. Available with one or two 

cam style bungs, TIG welded with the petcock bung on the right 

side. 

651017 Wasp chopper tank 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



920324 920323 

Sportster 

Dyna 

Deluxe Option Rear Tank Lift Kit 

• Made from American Cold Rolled Steel 

• All Stainless Steel Hardware 

• Durable Black Powder Coat Finish 

• E-Z BOLT-ON INSTALL - DOES NOT REQUIRE REMOVAL OF 

TANK 

• Instruction Sheet Included 

Color: Black Powder Coated , Material: Steel , Unit: Kit , 

Qty.: 1 

Touring, Trike 


920324 99-17 Dyna, 95-20 

Sportster 

920323 99-23 Touring, 00-17 

Softail 

Moves the tank back up to 3/8“ 

Moves the tank back up to 1/2“ 

Softail 

Billet Aluminum Tank Lift Kit 

• Made from 6061 billet aluminum 

• All stainless steel hardware 

• Includes thread protector caps 

• Choice of durable black powdercoat finish 

• Bolt-On design 

• Does not require removal of the gas tank 

• Instruction sheet included 

Color: Black Powder Coated , Material: Billet Aluminium , 

Unit: Kit , Qty.: 1 

Tank Lift Kit for Sportster 04-20 

This tank lift kit allows to adjust the height in steps from 35-50 

mm. The lift kit aligns perfect with the lower edge of the tank. 

Wire routing underneath the tank is possible with this kit. 

642876 Adjustable (35-50 mm) tank lift kit 


920316 99-17 Dyna 2,5“ Lift for Dyna 

920317 99-17 Dyna 3“ Lift for Dyna 

920318 00-17 Softail 1“ Lift for Softail 

Thunderbike Tank Pin-Up Kit 

920319 00-17 Softail 

920320 00-17 Softail 

920321 00-17 Softail 

920322 00-17 Softail 

1,5“ Lift for Softail 

2“ Lift for Softail 

2,5“ Lift for Softail 

3“ Lift for Softail 

• Black powdercoated 

• Tank lift kit 

• Cool chopper look for 12-16 XL1200V, 10-20 XL1200X, 19-20 

XL1200XS 

• Ideal in combination with coil relocation kits 

892210 Tank Pin-Up Kit, black 



920310 95-20 Sportster 1“ Lift for Sportster 

920311 95-20 Sportster 1,5“ Lift for Sportster 


920313 95-20 Sportster 2,5“ Lift for Sportster 


920328 99-07 Touring 2,5“ Lift for Touring 

920329 99-07 Touring 3“ Lift for Touring 

920315 99-17 Dyna 2“ Lift for Dyna 

920325 99-23 Touring, 09-23 Trike 1“ Lift for Touring 

920326 99-23 Touring, 09-23 Trike 1,5“ Lift for Touring 

920327 99-23 Touring, 09-23 Trike 2“ Lift for Touring 

Note: Key switch might need relocation!

APPAREL 

893593 893594 893595 893596 893597 893599 

SEATS & 

TOURING 

690833 

Paughco Gas Tank Bushings and Petcock 

Adapters 

893593 Adapter 3/8” NPT petcock on late-style 22 mm bung 

893594 Adapter 1/4” NPT petcock on late-style 22mm bung 

893595 Adapter late-style 22 mm petcock on 3/8” NPT bung 

893596 Reducer bushing – 1/2” NPT to 3/8” NPT 

893597 Petcock Bung – 1/4” NPT 

893599 Petcock Bung – 22 mm 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Tank Lift Kit 

• Black powder coated 

• Fits 04-20 Sportster, except 08-10 XR1200, 10-13 XR1200X 

690833 Tank lift kit 

619665 

619663 

ELECTRICAL 

EXHAUST 

INTAKE 

Reducer Bushings 

893589 1/4” NPT to 1/8” NPT 

893590 3/8” NPT to 1/8” NPT 

893591 3/8” NPT to 1/4” NPT 

893589 893590 893591 

619666 

619664 

ENGINE 

GASKETS 

Paughco Oil Tank Drain Plug 

893600 Plug comes with O-ring (5/8”-18) 

Gas Tank Fitting 

893592 Unplated Fitting 1/2” x 3/8” For Custom Built Gas Tanks 

656148 

Tank Lift Kits by ODC 

For 95-20 Sportster, except 08-10 XR1200, 10-13 XR1200X 

619663 1.5“ 

619664 2“ 

619665 2.5“ 

619666 3“ 

For Dyna 99-17 

656148 2“ for Dyna 99-17 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

893586 893587 893588 

Hex Plugs 

893586 1/8” NPT Hex Plug (zinc-plated) 

893587 1/4” NPT Hex Plug (zinc-plated) 

893588 3/8” NPT Hex Plug 


Steel “Petcock Bungs” by Hell’s Kitchen 

Choppers 

While you’re creating that out of sight one-off tank, don’t 

forget you need to get the gas to the engine, and that calls for 

a petcock mount. Most petcocks used in custom applications, 

and what we offer, have either 3/8” NPT or 1/4” NPT threads. 

These steel Petcock Bungs are offered to accept either thread 

size. They are 2” long, with 1/2” of either 3/8” NPT or 1/4” 

NPT internal thread for your petcock to screw into, then the 

remaining 1 1/2” bored out to .8200 inner bore to allow good 

gas flow. Can be used with custom oil tanks as well. Comes Raw. 

Position Petcock Bung where you want the petcock to mount, 

cut a hole in the tank, then weld ‘er in!. Sold Each. 

632705 Petcock Bung. 2” long, 7/8” O.D. For 3/8 NPT Petcocks 

632706 Petcock Bung. 2” long, 7/8” O.D. For 1/4 NPT Petcocks 


12726 Petcock fits OEM and custom tanks thru 74 with internal 

3/8" NPT connection 

12727 3/8” NPT Petcock w/90 degree outlet. With reserve 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


86665 

696276 

86676 

Mounting Kit for Fat Bob Tanks 

Hardware kit includes bolts, nuts, washers and spacers for 

mounting Fat Bob tanks on 4-speed style Big Twin frames 

through 84 and most customs. 

260113 Mounting Kit for Fat Bob Tanks 

Weld-On Gas Tank Extensions 

Raw steel pre-formed, changes the look of your bike 

dramatically just by welding on these two stylish tips without 

the expense of a new stretched gas tank. 

86665 For 3.5 gallon split tanks 

86666 For 5 gallon split tanks 

86676 For Twin Cam Softail tanks 

696276 New system tank extensions for Twin Cam Softail 

models 

Universal Tank Mounting Kit for Builders 

Building your own tank you say, well how are you going to 

mount it? This complete set of tank mounts comes with not only 

the straps and rubber mounting parts to go on the frame, but 

also the machined blocks that are welded into the fuel tank for 

them to bolt to. 

699985 Universal Tank Mounting Kit 

Wagner Fuel Tank Sealing 

Fuel tank sealing set is a special treatment to stop corrosion 

inside of fuel tanks and to protect the fuel tank from further 

corrosion on a longterm basis. The fuel tank sealing set consists 

of a rust exchanger and a single-component resin for longterm 

coating. 

Rust Exchanger: 

• Stops corrosion immediately, total derusting no longer 

necessary 

• Additionally converts rust into a non-corrosive metal 

compound. 

• The rust exchanger is a very thin liquid and thus gets through 

all pores. 

• It forms a violet-black layer, an ideal condition for the 

following treatment with the sealing. 

• It saves times and money, neither intensive derusting, nor 

dangerous sandblasting or undercoating necessary. 

16• It may only be applied on dry, oil and grease-free surfaces 

• Easy application, ready for use, protect from frost. 

• Content 2x 250 ml sufficient for tank treatments up to 

40 ltrs. tank volume (or multiple applications on smaller 

tanks). 

Single-Component Sealing: 

• Forms a fuel and acid-resistant longterm coating. 

• Single-component resin, thus universal application. 

• Multiple applications possible. 

• Economic in use. 

• Content 500ml, sufficient for tank treatments up to 40 ltrs. 

tank volume (multiple applications possible on smaller tanks) 

685993 Wagner tank sealing kit 

Rubber Mounts for ‘Flatside’ Gas Tanks 

Accurate reproductions of the Original Equipment parts used to 

mount ‘flatside’ gas tanks to 4-speed FX models 85-86, and Softail 

models from 84-99. Pack of 6. Replaces OEMs 11447, 5775. 

25577 Flatside Rubber Mounts 

Grommet Fuel Tank Mounting by James 

Gaskets 

667093 84 & Up, FX, FXST, Softail, Pack of 12 


APPAREL 

SEATS & 

TOURING 

Custom Hardware Kit for ‘Flatside’ Tanks 

Chrome-plated beveled washers and countersunk mounting 

screws provide a custom look. They replace the cad-plated 

Original Equipment screws and washers. 

25590 Fits all Softail models from 91-99 

Lower Bolt Kit for Fat Bob Tanks 

This kit replaces the stock lower front mounting hardware on all 

motorcycles equipped with twopiece ‘flatside’ Fat Bob gas tanks 

from 84-90. Kit includes threaded stud, two beveled washers, 

and two chrome acorn nuts. 

25001 For 4-speed FX’s from 85-86 and Softail models from 

84-90 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Mounting Kit for Fat Bob Tanks 

A ‘must’ when installing CC or Original Equipment Fat Bob tanks on 

4-speed frames through 84. Special washers in kit prevent possible 

thread damage to rear mounting holes and keep tanks from resting 

against heads. 

26446 Mounting Kit for Fat Bob Tanks 

Another ‘must’ for installing Fat Bob tanks. One of our 

mechanics came up with this little item. It’s actually the chain 

guard mounting grommet, but it works great in the front Fat 

Bob tank mount holes to isolate the tanks from vibration. 

25548 Rubber grommet with a steel insert for use in mounting 

Fat Bob tanks. Helps to isolate the tanks from vibration. 

Pack of 10 (repl. OEM 11411) 

Custom Mounting Kit for ‘Flatside’ Tanks 

A complete kit that can be used to update your existing ‘flatside’ 

tank mounts, or used on newly-constructed bikes instead of 

purchasing Original Equipment parts. The beveled washers and 

countersunk mounting screws are chrome-plated, and provide a 

custom look. 

25550 Fits 84 Softail models, and all models with split tanks 

from 85-99 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Universal Fat Bob Gas Tank Quickmount Kit 

A precise and effortless way to mount Original Equipment or 

aftermarket Fat Bob tanks to custom or Original Equipment 

frames that have had the gas tank brackets removed. It 

permits the builder to temporarily attach the one-piece 

bracket for a quick visual check of tank placement on custom 

applications, and once a tank position is selected, the entire 

bracket assembly may be welded in place for a stronger-thanstock, 

precision system of support. 

25048 Universal Fat Bob Gas Tank Quickmount Kit 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



These drawings are top views of the valves illustrating the positions of the levers and the nipples in left-side installations 

Pingel Power-Flo High Volume Petcocks 

Features a brass body with show quality chrome-plating or highly-polished aluminum stainless steel internal components and 

permanent stainless steel filter screen. These petcocks offer the highest fuel flow available of any aftermarket fuel valve. Available to 

fit gas tanks from 75-06 with 22mm tank bung. 

Smooth 

Diamond 

27086 

1626602 Chrome-plated brass 

27085 

Reserve Petcocks with 22 mm Threads 75-06 

All the features of 3/8" NPT reserve petcocks, but specifically 

designed to fit 1975 and later tanks with 22mm tank bung. No 

adapter required. Petcocks have the adapter nut installed for 

you. No additional sealants required. 

CHROME POLISHED 

26835 n/a Single outlet (illustration ‘A’) 

27085 27087 Single outlet (illustration ‘G’) 

27086 n/a 

Single outlet with nipple down (illus. 

‘H’) 

Replacement Mounting Nut 

26843 For use with 22mm threaded petcocks only 

Reserve Petcocks with 3/8"-NPT Threads Pre 75 

Primarily for use on street bikes. The reserve position provides 

comparable reserve fuel amount to the OEM and other 

aftermarket petcocks. 

CHROME 

POLISHED 

26700 26600 Single outlet (illustration ‘A’) 

27089 27091 Single outlet (illustration ‘G’) 

Adapter Nut 

Permits installation of 3/8"-NPT petcocks on OEM and 

aftermarket gas tanks with 7/8" or 22mm tank bungs. 

Rebuild Kits for Reserve Petcocks 

For 3/8“ NPT and 22 mm Petcocks and Single-Side Outlet only 

(not for nipple-down). A 6 1/2“ or wider bench wise is required. 

26718 Complete kit with tools and components for 3 Pingel 

petcocks 

26719 Components only with parts to rebuild 5 Pingel petcocks 

Pingel Power-Flo ‘Designer’ High-Volume 

Petcocks 

Same as the standard Pingel petcocks, except with brass chromeplated 

‘Designer’ bodies. Designed for the 22mm tanks bungs 

used on gas tanks 75-06. Same maximum flow rate to keep 

fuel at the carb where the fuel amounts as OEM and other 

aftermarket petcocks. Made in the USA. Patented 

STYLE ‘ILLUS. A’ ‘ILLUS. F’ ‘ILLUS. G’ 

Smooth 27070 27075 27080 

Diamond 27073 27078 27083 

Replacement Mounting Nut 

26843 For use with 22mm threaded petcocks only 

Rebuild Kits for Reserve Valves 

For 3/8“ NPT and 22 mm Petcocks and Single-Side Outlet only 

(not for nipple-down). A 6 1/2“ or wider bench wise is required.. 

26718 Complete kit with tools and components for 3 Pingel 

petcocks 

26719 Components only with parts to rebuild 5 Pingel petcocks 

Pingel Power-Flo ‘Designer’ High-Volume 

Petcocks 

Same as the standard Pingel petcocks, except with brass show 

chrome plated ‘Designer’ bodies. Designed for 22mm tank bungs 

used on gas tanks 75-06. Same maximum flow rate to keep fuel 

at the carb where the fuel is needed. Same comparable reserve 

fuel amounts as OEM and other aftermarket petcocks. Made in 

the U.S.A. Patented. 

26622 Round ‘Finned’ 

26627 Hexed Oval 


APPAREL 

688504 

688500 

688501 

SEATS & 

TOURING 

25253 

25246 25252 

FOOT 

CONTROLS 

688507 

688502 688503 

HAND 

CONTROLS 

688505 

Fuel Injection to Carburetor 

Conversion Tank Fitting Kits 

by Pingel 

Pingel has developed the perfect kit to 

help you convert your fuel injected bike 

over to a carburetor to help deliver more 

power to that ‘big-inch’ motor. The kit 

replaces the OEM fittings and allows you 

to install the Pingel Power-Flo fuel valve 

of your choice. Made of stainless steel 

right here in the U.S.A. 

688504 Conversion kit for 95-01 Touring 

models with Magneti Marelli EFI 

(adapter & plug) for use with any 

Pingel 22mm fuel valve 

688505 Conversion kit for 00-03 models 

with Delphi EFI (adapter & plug) 

for use with any Pingel 22mm 

fuel valve 

688506 Conversion kit for 04-17 Dyna, 

01-17 Softail, 02-16 Touring, 

09-16 Trikewith Delphi EFI 

(adapter only) for use with any 

Pingel 22mm fuel valve 

688507 Conversion kit for 07-20 

Sportster, except 08-10 XR1200, 

10-13 XR1200Xwith Delphi EFI 

(adapter only) for use with any 

Pingel 1/4” NPT fuel valve 

Weld-In Petcock Bungs by 

Pingel 

These tank bungs come in 22mm (stock 

H-D) male or 3/8” NPT female and are 

designed to be welded directly to the 

fuel tank. Great for custom gas tanks or 

repairing of stock tanks. 

688500 22mm aluminum weld-in bung 

688501 22mm steel weld-in bung 

688502 3/8” NPT aluminum weld-in bung 

688503 3/8” NPT steel weld-in bung 

Valve Adapter for 35-65 Big 

Twin Tanks by Pingel 

This product offers better fuel flow and 

retains the stock crossover connection of 

your 35-65 Harley-Davidson Big Twin split 

fuel tanks. Don’t let the stock fuel valve 

be the bike’s main jet. The stock fuel 

valve set up simply cannot support today’s 

high performance engine fuel demands. 

This stainless steel gas tank adapter and 

any of the 22mm threaded Pingel Power- 

Flo fuel valves will drastically improve 

your fuel supply. 

688508 Fuel valve adapter for 35-65 Big 

Twins 

Chrome Replacement Petcocks 

Chrome-plated duplicates of the stock gas valves 

used from 75-06. Available in three different 

outlet tube options, straight down, left-hand 

or right-hand for applications at the front, rear, 

or either side of the gas tanks. Complete with 

a chromed 13/16" nut and nylon mesh filter 

screen. 

25246 Straight down spigot 

25252 Left-side spigot 

25253 Right-side spigot 

12731 Replacement 3-hole Viton seal 

(fits latest design with .260" fuel 

tubes) 

12726 12727 

25245 

25243 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Petcock Adaptor 

Allows the use of a 22mm petcock in 

a fuel tank designed for Delphi fuel 

injection. Accepts any petcock that installs 

using a 22mm nut, chrome finish and 

includes o-ring. Sold each 

643240 22mm petcock adaptor, 07-20 

Sportster, except 08-10 XR1200, 

10-13 XR1200X, 04-17 Dyna, 

01-17 Softail, 02-16 Touring, 

09-16 Trike 

Fuel Tank Outlet Plug 

Used to plug the outlet on fuel tanks 

that use either fuel-injection or petcock 

adapter #62842-00. Also for use on 

aftermarket fuel tanks that have dual 

fuel outlets when only one is required. 

Polished chrome finish and includes 

o-ring. 

643239 Polished chrome fuel tank outlet 

plug, 01-03 Softail, 00 FXSTD 


Chrome Petcocks 

Engineered and designed to eliminate 

all internal O-rings. The innercore 

design insures against gas leakage while 

providing maximum flow. Features a filter 

screen, reserve setting, and chrome body. 

12726 Fits OEM and custom tanks thru 

74 with internal 3/8" NPT connection 

12727 3/8” NPT Petcock w/90 degree 

outlet. With reserve. 

25245 Fits OEM and custom tanks 75-82 

with external 13/16" nut connection 

25243 Same fit as CC #25245 but with 

90° barb 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


OFF 

ON RES 

OFF 

ON RES 

OFF 

ON RES 

OFF 

ON RES 

DOWN 

STRAIGHT 

BACKWARD 

FORWARD 

‘Click-Slick’ Petcocks by Golan Products 

• Manufactured from 360 brass with stainless steel ball bearings 

and components 

• Stainless steel internal ball bearings provide virtually frictionfree 

movement of the petcock handle 

• Available in either a brass or chrome-plated finish 

• Features quick detents with a 90º movement from “on” to 

“off” to “reserve” 

• Made in the USA 

Chrome 

‘Click-Slick’ Petcocks with 22mm Threads for Fuel Tanks 

from 75-06 

603530 Rear Facing 

603531 Downward facing 

603532 Forward facing 

603533 Straight facing 

603534 6-AN fitting 

‘Click-Slick’ Petcocks with 3/8”-NPT Threads for Fuel Tanks 

Pre-75 





Black Oxide 

’Click-Slick’ Petcocks with 22mm Threads for Fuel Tanks 

from 75-06 





’Click-Slick’ Petcocks with 3/8”-NPT Threads for Fuel Tanks 

Pre-75 



Brass 

‘Click-Slick’ Petcocks with 22mm Threads for Fuel Tanks 

from 75-06 





‘Click-Slick’ Petcocks with 3/8”-NPT Threads for Fuel Tanks 

Pre-75 





603549 6-AN fitting 

603558 603549 

603530 

890478 

890479 

632252 



1/4” Petcocks for Custom 

Tanks 

These petcocks are available with or 

without the reserve feature, and fit 

any custom gas tank and that take 1/4” 

petcocks. 


696054 

Fuel Line Petcock by Kustom 

Tech 

• Available in brass polished or chrome 

• Clean look (no petcock on your custom 

tank) 

• No reserve 

696054 Brass polished 


696055 

Petcock for S&S Carburetor by 

Kustom Tech 

• Available in brass polished or chrome 

• Clean look (no petcock on your custom 

tank) 

• For S&S Super E/G 

• No reserve 

• To match with the Kustom Tech device 

and throttle kit 

696055 Brass polished 

890479 Chrome

632040 

APPAREL 

632041 

SEATS & 

TOURING 

FOOT 

CONTROLS 

668376 

27050 

27051 

27051 

Viton Seals for Petcocks 

Viton material eliminates the swelling 

problems associated with the various fuels 

available today. The 3-hole design (not 

shown) fits petcocks with .260"-diameter 

fuel tubes. Pack of 10. 

12728 4-hole seal 

12731 Replacement 3-hole Viton seal 

(fits latest design with .260" fuel 

tubes) 

Gas Tank Knee Pads 

These universal fit rubber knee pads affix 

to your tank with double sided adhesive 

(included) and give tanks a very cool old 

school look! Available in 2 sizes to match 

most any tank configuration out there. 

The smaller size measures approx. 7” long 

x 3 1/2” tall at the highest point. The 

larger version measures approx. 7” long 

x 4” tall at the highest point. Stick these 

puppies on your tank and stand out from 

the crowd! Sold as pairs. 

632040 Gas tank knee pads-Small 

632041 Gas tank knee pads-Large 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

668376 

ENGINE 

Accel High-Flow Petcocks 

American-made high-flow petcocks 

feature chrome-plated bodies and 5/16" 

O.D. hose barbs. Other features include 

a reserve function, 100 micron filtering 

screens, and easy-to-grasp handles. Bodies 

are engineered to prevent leakage, yet 

deliver maximum fuel flow for highperformance 

applications. Two of the 

petcocks have a swiveling banjo which 

rotates 180° for custom hose routing. Fit 

all Original Equipment or aftermarket 

tanks with 22mm bungs. 

Vacuum Petcock Bypass Kit 

Bypass the Original Equipment vacuum 

operated petcock. Easy to install. Fits most 

Big Twin and Sportster models from 98-06 

(except fuel injected models). 

25257 Vacuum Petcock Bypass Kit 

19882 

15093 

K&N ‘Nylon’ Inline Fuel Filters 

Fit 1/4" fuel line. 

19882 Large (card of 12) 

15093 Small (card of 12) 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

27051 Petcock with rotating barb 

27050 Petcock with straight down barb 

668376 Petcock with vertically rotating 

barb 

WHEELS, TIRES 

& BRAKES 

FRAMES 

‘Wing’ Type Fuel Valve 

This classic was used on early Sportsters 

but it can be used on any tank with a 3/8 

NPT petcock outlet. 

688254 Wing type fuel valve 

Brass 6-AN Adapter Fittings 

by Golan Products 

Perfect for adding hard lines to your 

Mikuni or S&S carburetor uses a 6-AN 

fitting. CNC-Machined from brass. Made 

in the U.S.A. 

603524 6-AN fitting for Mikuni carburetors 

18255 

Fuel Filter 

Small size, but packs big protection for 

your motor. Easily cleaned, reusable 

screen. 


18255 For 5/16" fuel line 

18256 For 1/4" fuel line 

Black 

651855 For 5/16" fuel line 

651854 For 1/4" fuel line 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Replacement Fuel Filter 

894887 Fits EFI 95-01 Touring Models 

(repl. OEM 61343-95) 

Shut-Off Valves for Fat Bob 

Tanks 

Accurate reproduction of the pre-66 thrutank 

gas tank shut-off assembly. Complete 

assembled unit includes shut-off rod, 

seat, cap knob and all washers, seals and 

hardware. 

25294 Replaces OEM 62033-41 

688512 

651856 

18240 

See-Flow Glass Fuel Filters 

A custom in-line fuel filter for 1/4" or 

5/16" line. 


18240 Complete filter for 1/4" line 

18239 Complete filter for 5/16" line 

Black 

651856 Black filter for 1/4” line 

651857 Black filter for 5/16” line 

Replacement filter element 

18241 Replacement element 

SUPER MINI 


Products 

CNC-Machined from T-6061 billet 

Billet Fuel Filters by Golan 

aluminum. Available in a chrome-plated 

or clear anodized finish. Chose from the 

Mini (3” overall length) or the Super Mini 

(2” overall length). Made in the U.S.A. 

Super Mini Fuel Filters 

603520 Super Mini fuel filter 5/16” fittings, 

clear anodized 

614033 

Hi-Flow Braided Fuel Line 

Crossovers by Goodridge 

These durable and attractive pre-made 

lines feature clear-coated stainless braided 

hose and chrome-plated steel compression 

fittings for easy installation. They are also 

available in a universal fitment for custom 

applications with 1/8 NPT ports in the 

bottom of the gas tank. 

Model Specific Pre-Made Fuel Line 

614027 Fits all FXSTD Deuce models from 00- 

07 

Universal Pre-Made Fuel Line 

Crossovers 

614033 9” Universal fuel line crossover 

with 1/8 NPT fittings 

614034 6” Universal fuel line crossover 

with 1/8 NPT fittings 

Steel Braided Fuel Line Kit 

This kit can be used to replace the fuel 

crossover line (between tanks) or fuel feed 

line (between petcock and carburetor). 

Fits all models with 1/4" I.D. fuel lines. Kits 

include 16" braided hose and a pair of 

chrome end caps. 

270565 Steel Braided Fuel Line Kit 

26603 

688514 

Pingel Fuel Filters 

The Pingel fuel filter is built to appeal to 

the true motorcycle enthusiast. This filter 

offers the same high quality as our fuel 

valve line and is designed and machined 

from billet aluminum. Close attention to 

detail and aesthetic quality is the standard 

and the result is a beautifully finished 

product that includes a cleanable bronze 

element that will last a lifetime. Pingel 

filters are the only filters designed to 

meet the high flow requirement needs of 

the Pingel Power-Flo gas valves, as well 

as today’s high flow carburetors. The fuel 

filters are available with 5/16” or 3/8” 

hose barb and also with a -6AN male 

thread inlets and outlets. Made in the 

U.S.A. 

26603 Fits 5/16" I.D. fuel line 

688512 -6AN chrome fuel filter 

688514 Repl. 40 micron bronze filter element 


APPAREL 

690979 

690980 

SEATS & 

TOURING 

690982 

690981 

690976 

FOOT 

CONTROLS 

Goodridge High Pressure 

Braided Fuel Line Kit for 

Fuelies 

Finally! Great looking fuel lines for your 

fuel-injected bike. Cleans up the last area 

to set off your custom paint job. 

14969 Fits all fuel injected models from 

95-99 

690978 

690977 

690975 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EFI Fuel Line Kits by 

Goodridge USA 

These durable and attractive kits feature 

your choice of either clear or black 

PVC coated, Teflon lined, stainless steel 

braided hoses with chrome plated steel 

valves and hardware. Kits come complete 

with fuel line, necessary hardware and 

replacement o-rings. 

Clear coated Braided Stainless Steel 

614176 Fits all 02-06 Touring models and 

04-17 Dynas 

614178 Fits all 08-16 Touring models 

614180 Fits all 07-20 Sportster models 

Black PVC coated Braided Stainless 

Steel 

614175 Fits all 02-06 Touring models and 

04-17 Dynas 

614177 Fits all 08-16 Touring models 

614179 Fits all 07-20 Sportster models 

Fuel Pump Door Seals 

690975 For 95-01 FLT/FLHT/FLTR/FLHR, cork 

690976 For 02-17 Softail models except Deuce, viton 

690977 For 02-07 FLHT/FLTR/FLHR, viton 

690978 For 08-23 Touring, 09-23 Trike, viton 

690979 For 07-20 Sportster, 18-22 Softail, viton 

690980 For 04-10 FXD,05-06 FXDC, 04-05 FXDX, viton 

690981 For 04-17 FXDL 04-17 FXDWG, 06-17 FXDB, 12-17 FLD, viton 

690982 For 07-17 FXDC, 08-17 FXDF, 04-08 FXDWG, viton 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

921279 921278 921280 921277 

EFI OEM-Style Replacement Fuel Line 

• High quality OEM-style replacement 

Fitment Note: Only Fuel-Injected Models , Unit: Each , Qty.: 1 


921279 04-17 Dyna 62349-04F 

921278 02-07 Touring, 01-17 Softail 62900-01D 

921280 07-20 Sportster 62350-07, 62351-07 

921277 08-10 Touring 62905-08 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



921281 921284 921282 921286 921285 921283 

OEM-Style Replacement Fuel Check Valve 

• High quality OEM-style replacement 

Fitment Note: Only Fuel Injected Models , Unit: Each , Qty.: 1 


921281 00-02 Touring 61408-00A 

921284 02-07 Softail 62189-01A 

921282 03-07 Touring 62228-03 

921286 04-17 Dyna 61294-04B 

921285 08-17 Softail 62189-08 

921283 08-23 Touring, except 23 FLHXSE, 23 FLTRXSE 62228-08A 

Black PVC Coated Stainless Braided Fuel Line 

As an upgrade over stock kit. Flex lines are clear or black PVC coated stainless steel braided with chrome steel hard line and fittings. 

All components are resistant to chemicals found in gasoline. 

Color: Black , Unit: Each , Qty.: 1 

PART# FITMENT FITMENT NOTE OEM # 

919887 01-17 Softail, 02-07 Touring, 04-17 Dyna Only fuel-injected models 62900-01D, 62349-04F 

919889 07-20 Sportster 62350-07, 62351-07 

919888 08-16 Touring Only fuel-injected models 61208-10, 62905-08 

921287 921290 921288 921289 


Replacement Fuel Filter Kit 

• Meets or exceeds OEM specifications 

• Includes necessary additional parts required for installation 

• Periodic replacement ensures top performance 

Fitment Note: Only Fuel Injected Models , Unit: Kit , Qty.: 1 


921287 01-07 Softail, 02-07 Touring 61001-01 

921290 07-20 Sportster 75304-07A 

921288 08-23 Touring, except 23 FLHXSE, 23 FLTRXSE, 08-17 Softail, 04-17 Dyna, 09-23 Trike 61011-04A 

921289 95-99 Touring 61343-95 




APPAREL 

Dash Cover with Speedometer Offset Kit 

The part gives your Harley a clean, cool and flatter look on the tank and 

is required as a replacement for the original cover if the speedometer are 

relocated to the headlight mask with our offset! 

During assembly it is necessary to shorten the holder for the original dash 

cover and then holes have to be drilled - then the cover is attached with 

the new supplied bracket. 

Included speedometer offset kit which ensures a much better view of the 

speedometers as you no longer have to look down at the tank! It is made 

of steel and then powder-coated in glossy black! 

No cables need to be extended during assembly, it is enough to reroute 

the cables to get to the right position! In principle, the holder replaces 

the original holder of the mask and the mask can then be attached to the 

new holder again! Two covers are supplied for the fittings, which serve as 

splash protection from below and for attachment! 

Fitment: 18-20 FXLR, 20-21 FXLRS , Certification: With Approval , 

Material: ABS , Unit: Kit , Qty.: 1 

PART# 

COLOR 



SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

Dash Cover 

The part gives your Harley a clean, cool and flatter look on the tank and is required as a replacement for the original cover if the 

speedometer are relocated to the headlight mask with our offset! 

During assembly it is necessary to shorten the holder for the original dash cover and then holes have to be drilled - then the cover is 

attached with the new supplied bracket 

Fitment: 18-20 FXLR, 20-23 FXLRS, 22-23 FXLRST, 22 FXRST, 23 FXBR , Certification: With Approval , Material: ABS , Unit: 


PART# 

COLOR 



DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

Skull Lower Tank Panel 

Multiple skull design cast from an original hand carved mold. 

37734 Fits most Fat Bob cast dashes from 65-99 


TOOLS & 

EQUIPMENT 


310192 

Dash Panel for Fat Bob Gas 

Tanks 

Fits Fat Bob gas tanks when dash or 

instruments are not mounted on tanks. 

26344 Plain Dash Panel for Fat Bob Gas 

Tanks 

Steel Chrome Dash for FX 

Models 

Stamped steel, chrome-plated instrument 

housing for tank mounted gauges on 

FX models from 77-84. Includes thick 

style tank-to-housing trim rubber and 

warning light hole plugs for custom 

applications. 

26339 Dash cover 

26338 Replacement trim rubber (repl. 

OEM 61401-82) 

310193 

310194 

Dash Panels for Fat Bob Tanks 

Fits FX and Low Rider models with Fat Bob 

gas tanks from 77-84. 

26348 Plain Dash Panel (repl. OEM 

61647-77T) 

310170 Replacement trim rubber 

310195 

3105050505 



Chrome Steel Dash Panel and 

Filler Strips 

Covers the gap between gas tanks on 84 

and earlier models. Attaches with rubber 

mounting band and clips. Sold each. 

Chrome Tank Panel 

New-style, show-chromed tank panel. Fits 

most Softail models from 84-99. Replaces 

OEM# 61155-84B. 

84747 Chrome tank panel 

Dash Kit with Integral Tach 

Features a 120 mph speedometer with 

built-in coil driven tachometer that 

works with all Harley 12 volt systems. Kit 

includes speedometer, two-light chrome 

dash cover, base plate with hardware, and 

ignition switch with keys. 

310139 2:1 speedo/tach dash kit 

Note: 91-03 self-canceling turn signals will not self cancel. 

91-03 models use a distance counting reed switch to self-cancel 

turn signals. The turn signals will operate normally, but 

will not self cancel. 

Chrome Dash and Mounting 

Kits 

These chrome kits contain the dash 

mounting and trim parts required for 

Fat Bob tanks in a single, easy-to-order 

package - simply choose from our great 

variety of large diameter speedometers 

to complete the installation. Each kit 

comes complete with chrome dash cover, 

base plate assembly with hardware and 

ignition switch with keys. 

Note: Not compatible with flat side tanks. 

310192 Cateye dash and mounting kit 

310193 Two-light dash and mounting kit 

310194 Three-light dash and mounting 

kit 

310195 Late-style dash and mounting 

kit

26188 

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

25972 

HAND 

CONTROLS 

Performance Machine Fuel 

Doors 

PM Fuel doors are offered in a recessed 

smooth version and a fluted style to 

match the look of your bike and designed 

to install easily. Machined from billet 

aluminum and available in chrome, 

black ano, and Contrast Cut finishes, the 

Contour Gas Door is the finishing touch to 

any well sorted bagger. 

684387 Fluted for models 92-07, black 

684388 Fluted for models 92-07, chrome 

08-23 Touring, except FLHR/C/XS, CVO 

FLHX, FLTR, 09-23 Trike, except 15-23 

FLRT 

684391 Smooth, black 

684392 Smooth, chrome 

684389 Fluted, black 

684390 Fluted, chrome 

Kuryakyn Push Button Fuel 

Door Latch for Touring Models 

Fumbling with your keys in the dark 

while trying to get your gas door open is 

not anyone's idea of fun. Add our Push 

Button Fuel Door Latch & make getting to 

the gas cap easy! It's a direct replacement 

for the stock key-lock fuel door latch. 

605193 Push button for fuel door for All 

92-23 Electra Glides, Road Glides, 

Street Glides & Tour Glides, Trike 

Two-Light and Three-Light 

Dashes for Fat Bob Tanks 

Show-chrome dash covers complete with 

lenses and trim rubber. Replacement 

lenses and trim rubber also available 

separately. 

26188 2-light dash 

25972 3-light dash 

26180 Replacement trim rubber 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Push Button Fuel Door Release 

Kit 

894869 Push Button fuel door release 

kit fits its 92-23 Touring, except 

Roadking models, black 

Fuel Tank Console Door 

894866 Fits 08-23 Touring, except 

FLHR/C/XS, CVO FLHX, FLTR, 

09-23 Trike, except 15-23 FLRT, 

(repl. OEM 61278-08), chrome 

894867 Fits 08-23 Touring, except 

FLHR/C/XS, CVO FLHX, FLTR, 

09-23 Trike, except 15-23 FLRT 

(repl. OEM 70900465), black 

Classic Cast Dashes 

Heavy-duty zinc die-cast dashes are 

beautifully chrome-plated duplicates of 

their Original Equipment counterparts. 

Complete in every detail, each dash also 

includes the lenses, light divider, and trim 

rubbers. May be installed on most 4-speed 

frames and Softail models when the 

appropriate dash base is used. 

26187 Fits all models 68-90 (replaces 

OEM 71241-68B) 

26186 Fits all models with self-cancelling 

turn signals from 91-95 

(except Dyna Wide Glide models) 

replaces OEM 71241-91 


These pieces will fit Original Equipment 

dashes as well as the dashes listed above. 

26239 Lens kit: Includes lenses, divider 

and hardware 

26240 Trim rubbers (pair) replaces OEM 

71295-68 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



26356 

310154 

26352 

26353 

26354 

Cateye Dash for Fat Bob Tanks 

Show-chrome cateye-style dash with 

lenses. Replacement lenses are sold each. 

26189 Cateye dash 

26356 Cateye red lens-plastic 

310154 Cateye green lens-plastic 

Dash Switch Decal 

Fits FL models from 68-84, FX models from 

71-72, FXWG models from 80-86, and 

Softail models from 84-99. Sold in pack 

of 5. 

310136 Replaces OEM 71300-79 

Replacement Lenses for Fat 

Bob Dash Covers 

Can be used to restore Original Equipment 

dashes or as replacement parts for CC 

dashes. Sold each. 

26356 Cateye red lens-plastic 

26354 3-light dash red lens (2 used) – 

plastic 

26353 3-light dash blue lens (1 used) – 

plastic 

26352 2-light dash red lens GEN / OIL – 

plastic 

310154 Cateye dash lens, green 

Three-Light Dash Mounting 

Plate 

Includes wiring and sockets. 

25971 Fits CC dash #25972 

26191 Replacement dash base light 

sockets (pack of five) 

Odometer Reset Cable for FX 

Models 

Complete odometer reset cable assembly 

for all 4-speed FX models (except FXWG) 

73-84. Includes chrome knurled knob, 

rubber grommet, washer, spring and 

flexible cable. Fully assembled, ready to 

install. 

26445 Replaces OEM 67210-73T 

Instrument Light Socket 

Assemblies 

OEM style replacement light socket 

assemblies include socket with wire and 

bulb. Available for most Big Twins and 

Sportster models 76-97. Sold in 5 packs. 

310113 Steel, 1 wire type 



Plain Dash Mounting Plate 

Basic mounting plate for use with Fat Bob 

dash covers #25972 and #26188 when 

dash lighting is not desired. 

25235 Without dash lights 

Rubber Dash Trim 

This handy item is designed to replace the 

rubber dash trim on 87-94 FXR models and 

the nacelle trim on 87-94 FLHS models. 

The trim is also a perfect match for 

Custom Chrome Rick Doss ABS dashes and 

many other protective uses.50"-long. 

13232 Replaces OEM 61117-86 

Trim Rubber for Low Rider 

Dash 

Thick style, black rubber trim for FX 

dual gauge housings. Neatly fills the 

open space between the tanks and the 

instrument housing while isolating the 

gauges from vibration. 

26338 Replacement trim rubber (repl. 

OEM 61401-82) 

Custom Dash Cover 

This custom dash cover has had the 

indicator lights and switch hole removed 

for a clean custom look. Designed for use 

with large diameter FL style speedometer 

and Fat Bob tanks. Perfect for custom 

FX and FL applications with remote 

mounted indicator lights and ignition 

switches. Fits all Big Twin 4-speed models. 

310146 Dash only (fits all two-light base 

plates)

APPAREL 

651239 

600244 

651858 

SEATS & 

TOURING 

FOOT 

CONTROLS 

651240 

Early Dash Mount Hardware 

by Paughco 

Center stud and top bolt for most Big 

Twin models from 47-67 or custom 

applications where the choke wire is not 

routed threw the dash. Made in the 

U.S.A. 

600247 

600240 

651859 

HAND 

CONTROLS 

LIGHTING 

651239 Chrome-plated dash center bolt 

for 47-67 models (OEM 71075-47) 

651240 Dash base stud for 47-67 models 

(OEM 71067-47) 

600241 

15850 

ELECTRICAL 

EXHAUST 

INTAKE 

Dash Center Mounting Bolt 

and Stud 

Includes chrome-plated center screw with 

stud and hardware. Fits Big Twins from 

47-67 as original part replacement or can 

be used on custom applications where 

choke wire is not brought through dash. 

Sold each. 

26162 Dash Center Mounting Bolt and 

Stud 

Chrome Dash Cover Screws 

Complete 4-piece set of chrome plated, 

buttonhead panel screws. Fit all Low Rider 

and FXEF dashes 77-84. Set of 4. 

26441 Chrome Dash Cover Screws 

Screw-In Style ‘Pop-Up’ Gas 

Caps 

Give your gas tank a custom look without 

having to cut, weld or re-paint! These 

caps simply screw into your existing tank 

bungs. They fit in nearly flush when 

closed; opens easily with just a 1/4 turn 

of the center of the cap. Billet aluminum 

construction with either a chrome-plated 

or wrinkle black finish. Available for a 

wide variety of models & years. 

Fits 96-19 Models 

600240 Chrome, Pop-Up gas cap set 

includes one vented & one 

‘dummy’ cap 

600247 Black, Pop-Up Gas cap set 


‘dummy’ cap 



non-vented gas cap 

653087 Black, Pop-Up gas cap set 



600245 Chrome, Vented Pop-Up gas cap 

(sold each) 

653089 Black, Vented Pop-Up gas cap 

(sold each) 

600246 Chrome, Non-vented Pop-Up gas 

cap (sold each) 

653091 Black, Non-vented Pop-Up gas 


Fits 82-95 Models 




653086 Black, Pop-Up gas cap set 



600242 Chrome, Vented Pop-Up gas cap 

(sold each) 

653088 Black, Vented Pop-Up gas cap 

(sold each) 

600243 Chrome, Non-vented Pop-Up gas 


653090 Black, Non-vented Pop-Up gas 



603075 Replacement o-ring for Pop-Up 

gas caps 


15851 

Low Profile Stainless Steel 

Gas Cap Sets 

These polished gas caps feature an 

extremely low-profile with either a 

peaked or domed top design. They fit all 

models with screw-type gas tanks from 

late 96-19. Sold in matched sets with left 

and right hand threads. 

15850 Chrome, Peaked set 

651858 Black, Peaked set 

15851 Chrome, Domed set 

651859 Black, Domed set 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


12 Point Gas Cap 

• 12 Point Gas Caps features a race inspired design made to 

accent stainless 12 point hardware 

• Each top is CNC machined from solid billet aluminum 

• Exclusive ratchet design provides proper closure torque & 

design alignment 

• Sold individually 

• Fitment: 97-up Vented 

• Laser engraved Arlen Ness logo & „Race Gas Only“ 

• Black Anodized or Chrome finish 

Fitment: 96-19 Sportster, 96-17 Dyna, 97-03, 07-10, 13, 

16-19 FLHR, 97, 00-02, 04-06 FLHRI, 98-06 FLHRCI, 02-03 

FLHRSEI, 04-06 FLHRSI, 07-18 FLHRC, 07 FLHRS, 07 FLHRSE3, 

08 FLHRSE4, 13 FLHRSE5, 14 FLHRSE, 18-19 FLHRXS , 

Fitment Note: 19 Models only in Case the OEM Fuel Cap 

does NOT have a notch in the Bottom Part. , Unit: Each , 

Qty.: 1 

PART# 

COLOR 



10-Gauge Gas Cap 

• 10-Gauge CNC machined billet aluminum gas caps with 

ratcheting design 






• Laser engraved Arlen Ness logo 

• All Black anodize or chrome finish 






does NOT have a notch in the Bottom Part. , Description: 

Vented , Material: Billet Aluminium , Unit: Each , Qty.: 1 

PART# COLOR 


919464 Contrast Cut 


Bar Gas Cap 

• The Bar Gas Cap is a function formed design that gives a clean 

look & easy open / close function 






• Laser engraved Arlen Ness logo 

16• Black Anodize or Chrome finish 






does NOT have a notch in the Bottom Part. , Unit: Each , 

Qty.: 1 

Pop-Up Gas Cap 

• Unique design includes built-in outer trim ring for flush 

appearance with the tank 

PART# FITMENT COLOR DESCRIPTION MATERIAL 

777178 

96-17 Dyna, 96-19 

Softail, 96-19 

Roadking, 15-19 

Freeweeler 

Chrome Vented 

Aluminum/ 

Billet 

PART# COLOR 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Mesh Gas Cap 

• Aluminum A380 with stainless steel 

mesh insert 

• 92-19 H-D Screw-type tanks, right hand 

thread and vented 

776549 Satin black 

Lockable Gas Cap for V-Rod 


• Lockable (2 keys delivered) 

• Black 

890777 Lockable gas cap 

Kuryakyn Replacement Gas 

Caps 

Sometimes they get lost, sometimes they 

get stolen, & sometimes they just wear 

out. Vented or non-vented, these chromeplated 

gas caps are a fraction of the cost 

of stainless steel caps. 

605196 Stock Style Gas Cap (R.H. Thread) 

- Vented (ea), 96-19 Sportster, 

96-17 Dyna, 00-19 Softail, 96-19 

Roadking 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

08661 

INTAKE 

Mesh L.E.D Fuel & Battery 

Gauge 

• Plug-&-play direct replacement for the 

stock fuel gauge with ultra bright L.E.D. 

fuel level and battery voltage indicators 

• Replaces stock tank Mounted (not 

center console mounted) Fuel gauge on 

94-19 Road Kings, 00-17 Softails, 91-17 

Dynas. 15-17 Freewheeler & 88-94 FXR 

models 

776551 Satin black 

Aircraft-Style Gas Cap Sets 

Low profile high-tech gas caps. Designed to be 

used with aircraft-style custom tanks. 

Weld-In Cap Kits 

Kits include weld-in bungs and caps. 

Locking 

08673 Chrome Gas cap set, vented and 

non-vented 

Non-Locking 


non-vented 

08676 Chrome Vented cap kit ONLY 

Bolt-In Cap Kits 

Kits include mounting rings, gaskets, screws 

and caps. 

Locking 


non-vented 

Kustom-Tech Spinner Gas Cap 

Machined from billet polished brass these 

screw-in type gas caps fit all tanks from 

82-19. They look great alone or combined 

with K-techs brass spinner style oil tank 

plug. 

696052 Left Spinner Gas Cap (NONvented) 

696053 Right Spinner Gas Cap (vented) 

96-19 Sportster, 96-17 Dyna, 

00-19 Softail, 96-19 Roadking 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Flush Mount Gas Caps by 

Kuryakyn 

These slick, flush mount gas caps have 

the high-tech look of aviation-style fuel 

fillers. The built in trim ring protects the 

painted surface around the filler opening 

from dings and gas stains. A keyed entry 

system permits their ultra thin profile and 

prevents tampering. Installation requires 

no cutting and the “key” is included. 

Stock gaskets must be reused on models 

from late 96-17. 

48267 Non-vented, for left-side tanks 

260252 Replacement key 

08661 Chrome, Locking vented cap kit 

Non-Locking 


non-vented 

08660 Chrome, Non-locking vented cap kit 


08667 Chrome Non-vented cap without 

lock ONLY 

08669 Chrome Non-vented cap with lock 

ONLY 

08664 Chrome Vented cap without lock 

ONLY 

08668 Chrome Vented cap with lock ONLY 

08682 Vented bolt-in trim ring (sold each) 

08670 Non-vented bolt-in trim ring (sold 

each) 

08666 Bolt-in cap trim ring gasket (pack of 

10) 

Iron Cross Gas Cap Set 

Stylish set to replace the OEM units. 

Contains a vented and a on vented cap, 

fits 83-95. 

683270 Iron Cross gas cap set vented / 

non vented 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

08677 Chrome mounting screws (pack of 

12) 

Note: Aircraft Caps Available with or without Locks for Either 

Bolt-In or Weld-In Applications 

TOOLS & 

EQUIPMENT 



651853 

Late-Style 

Skull Locking Gas Caps 

Black locking gas caps with a chrome skull on 

the lock cover. Sold with two keys as a set or 

individually. 

688700 Skull locking gas cap vented 83-95 

688701 Skull locking gas cap non-vented 

83-95 

688702 Skull locking gas cap set 83-95 

688703 Skull locking gas cap vented 96-19 

688704 Skull locking gas cap non-vented 

96-19 

688705 Skull locking gas cap set 96-19 

Screw-In Stainless Steel Gas 

Caps for Models from 83-95 

“Screw-In” gas caps for Big Twin and 

Sportster models 83-95 (except FLT and fuel 

gauge cap). 

260077 Vented (right side - right hand 

threads). Replaces OEM 61102- 

83A 

260078 Non-vented (left side - left hand 

threads). Replaces OEM 61103-83 

260073 Gas cap set. Includes one vented 

and one non-vented cap 

Original- 

Style 

Cam-Style Gas Caps 

A variety of replacement and custom 

gas caps. Available vented for single cap 

gas tanks and the right side of Fat Bob 

gas tanks, or without a vent for the left 

side of Fat Bob tanks. They fit Original 

Equipment and replacement tanks with 

cam-style bungs. 

Polished Stainless Steel Late-Style 

Caps, 73-82 XL&BT 

Includes left and right caps for Fat Bob 

tanks. 

26570 Vented cap ONLY 

26571 Non-vented cap ONLY 

Chrome Original-Style Gas Caps, 65-72 

XL&BT 

Includes left and right caps for Fat Bob 

tanks. 

12725 Plain vented cap ONLY 

26021 Plain non-vented cap ONLY 

260023 

26580 

Steel Gas Caps 

Perfect mechanical reproductions of the 

Original Equipment parts. The lowpressure 

relief vent is properly recessed in 

the cap to clear the filler neck vent tube. 

For screw-style tanks from 83-95. 


26580 Set of left and right caps 

26582 Right side cap only (vented) 

26581 Left side cap only (non-vented) 

Black 

651862 Set of left and right caps 

651853 Rght side cap only (vented) 

651861 Left side cap only (non-vented) 

260032 


Custom Chrome Lockable Gas 

Cap Sets 

Beautifull chromed screw-in gas cap sets 

with keylock and round key hole cover. 

Available for models from 83-95 and for 

models 96-19. 


682785 Chrome gas cap set for models 

83-95 

682786 Chrome gas cap set for models 

96-19 

685994 Black gas cap set for models 

83-95 

685995 Black gas cap set for models 

96-19 

Screw-in Gas Caps with 

Aircraft Look 

Now you can enjoy the high-tech aircraft 

cap look without the hassle of re-working 

your existing tanks. These screw-in gas 

caps are chrome plated, solid billet 

aluminum and have actual countersunk 

stainless Allen head fasteners around 

the outside edge. Center lever raises and 

lowers just like other aircraft caps, except 

turning it removes the entire cap, not just 

the center plug. No modification required, 

fits 83-95 (except FLT and fuel gauge cap). 

Caps are non-locking. 

260023 Gas cap set. Includes one vented 

and one non-vented 

260022 Vented (right side, right hand 

threads) 

Deluxe Scalloped Gas Caps 

Chrome deluxe gas caps with scalloped 

edges. Available vented or non-vented 

for most Big Twin and Sportster models. 

Also fits most after-market replacement 

gas tanks. 

For 82-95 models 

688532 Chrome Deluxe non-vented gas 

cap 

688538 Black Deluxe non-vented gas cap 

For 96-17 models 

688535 Chrome Deluxe non-vented gas 

cap 

688539 Black Deluxe gas cap set (one 

vented and one non-vented cap) 

688541 Black Deluxe non-vented gas cap

APPAREL 

SEATS & 

TOURING 

653785 

653786 

651863 

FOOT 

CONTROLS 

HAND 

CONTROLS 

653787 

653788 

LIGHTING 

Joker Machine Billet Gas Caps 

Joker Machine screw in gas caps for 

Sportster models. Sold each. 

653785 Smooth, clear 96-19 

653786 Smooth, black 96-19 

653787 Techno, clear 96-19 

653788 Techno, black/milled 96-19 

260005 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

Custom Flamed Gas Caps 

These flamed gas caps fit 83-95 screw 

style bungs and are available as a set or 

individually. Black and chrome finish. 

688243 Flame gas cap set 

688244 Flame gas cap right hand vented 

688245 Flame gas cap left hand non-vented 

Spinner Style Gas Caps 

Give your bike a touch of hot rod with 

these spinner style gas caps. Available in 

chrome or black finish for most model 

years. Dummy caps to replace the fuel 

gauge on 00-Up models are also available. 

Sold each. 

Screw in style 96-19 

688298 Chrome Spinner cap, vented 

688299 Chrome Spinner cap, non-vented 

688302 Black Spinner cap, vented 

688303 Black Spinner cap, non-vented 

688304 Chrome Spinner cap dummy left 

688305 Black Spinner cap dummy left 

Screw in style 82-95 

688297 Chrome Spinner cap, non-vented 

688300 Black Spinner cap, vented 

688301 Black Spinner cap, non-vented 

Cam style 57-82 Sportster 

688293 Chrome Spinner cap, cam style, 

non-vented 

688294 Black Spinner cap, cam style, vented 

688295 Black Spinner cap, cam style, 

non-vented 


Early-Style Gas Caps for Late 

65-72 

Chrome gas caps for Big Twin and 

Sportster models from 65-72 (except FLT 

and FXR models). 


260003 Chrome Vented Early-Style Gas 

Cap 

260005 Chrome Gas cap set. Includes one 

vented and one non-vented 

Black 

651863 Black gas cap set. Includes one 

vented and one non-vented 

651864 Black vented 

‘Live To Ride’ Gas Cap Covers 

Covers with chrome eagles feature a ‘A 

Way of Life’ banner. Gold eagles have 

‘Eagle Spirit’ banners. They attach with 

double-sided foam tape and fit all late 

model gas caps (except molded plastic 

caps). 

‘A Way of Life’ 

19006 Chrome eagle (sold each) 73-20 

Sportster, 73-84 FX Shovel, 73-84 

FL Shovel, 85-94 FX Model, 

91-17 Dyna, 84-23 Softail, 94-23 

Roadking 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


3-Dimensional Gas Cap Covers 

Distinctive covers are sand-cast from 

hand-carved originals. Designed to fit 

over OEM style caps. Glue them on 

with 5-minute epoxy, or use silicone 

adhesive (not included). Sold each. Fits 

73-20 Sportster, 73-84 FX Shovel, 73-84 FL 

Shovel, 85-94 FX Model, 91-17 Dyna, 84-23 

Softail, 94-23 Roadking 

37863 Skull 

37868 Flame 

Gas Cap Cover 

683075 Drilled gas cap cover 73-20 

Sportster, 73-84 FX Shovel, 73-84 

FL Shovel, 85-94 FX Model, 

91-17 Dyna, 84-23 Softail, 94-23 

Roadking 

Lower Frame Cover (Scoop) 

for Sportster 

Precision CNC made ABS frame scoop 

for all Sportster models 04-20 including 

mounting hardware. 

893771 Glossy black 

696051 

890485 

890486 

893744 Raw version to be painted 

Polished Aluminum Skull Gas 

Cap Cover 

Multiple skull design cast from an original 

hand-carved mold . Attaches to OEM style 

gas caps with epoxy (not included). Sold 

each. 

37735 Polished Aluminum Skull Gas Cap 

Cover 73-20 Sportster, 73-84 FX 

Shovel, 73-84 FL Shovel, 85-94 FX 

Model, 91-17 Dyna, 84-23 Softail, 

94-23 Roadking 

Weld-On Gas Caps by Kustom- 

Tech 

• To weld on steel gas or oil tank 

696051 Brass Cap Spinner Style 

890485 Aluminium Cap Acorn Style 

890486 Aluminium Cap Smooth Style 

47775 



Chrome Oil Tank Cap 

Assembly 

For stock oil tanks on all 4-speed Big Twin 

models (except Softail models) thru 82 

and 67-E78 Sportster models with electric 

start. 

12352 Replaces OEM 62610-52TA 

Weld-In Custom Pop-Up Gas 

Cap 

• Vented gas caps that don’t protrude 

from the surface of the gas tank at all! 

• To access the filler, you press and 

twist... the cap pops up, then unscrews 

normally 

• For custom “weld-in” applications ONLY 

• Sold each 

47715 Stainless steel bung and cap 

Replacement Pop-Up Caps ONLY 



Custom Spoiler for Touring 

• Includes mounting hardware 

PART# 

913251 

913252 

FITMENT 

17-23 

Touring 

Fitment 

Note: Only 

without 

engine 

guard 

17-23 

Touring 

Fitment 

Note: Only 

without 

engine 

guard 

COLOR 

FINISH 

Ready To 

Paint 

Black 

Gloss 

MATERIAL 

ABS 

ABS

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Frame Cover Racing for 

Breakout 

Easy to bolt on frame scoop CNC made of 

ABS plastic. Fits FXSB 13-17, FXSBSE 13-17. 

895500 Paintable black 

895501 Gloss black 

Chin Fairing 

• Open grilled design does not restrict 

airflow 

• Installs on Indian big twins with or 

without an oil cooler 

• High-impact ABS construction available 

in chrome or satin black 

• Styled to match the chrome Oil Cooler 

Cover, P/N 775640, sold separately 

PART# 

775663 

FITMENT 

14-23 Indian, 

except Scout, Challenger, 

Pursuit 

COLOR 

FINISH 

Black 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

914878 

Downtube Old School Cover 

by Cult Werk 

Laser cut precision made steel cover to 

hide the frame section in front of the 

downtubes of the frame. 

893748 Fits 04-20 Sportster models, flat 

black powder coated 

775664 

14-23 Indian, 

except Scout, Challenger, 

Pursuit 


INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Custom Chin Fairing 


• Easy to mount on existing points 

Fitment: 09-14 FLHX, 09 FLTRSE3, 09 

FLTR, 09-10, 13, 16 FLHR, 09-16 FLHRC, 

10, 15-16 FLHXSE, 10, 13 FLTRX, 11 

FLHXSE2, 11 FLTRUSE, 12 FLHXSE3, 12 

FLTRXSE, 13 FLTRXSE2, 13 FLTRXSE2 

ANV, 13 FLHRSE5, 14 FLHRSE, 15-16 

FLHXS, 15-16 FLTRXS, Certification: 

With Approval , Material: ABS , Unit: 

Set , Qty.: 1 

PART# 

COLOR 



Precision Chin Spoiler 

• Covers the area between the frame 

and downtubes, horn, oil cooler and 

regulator cover for a clean look 

• Aggressive open-air design maintains 

airflow to the oil cooler 

• Includes hardware for easy bolt-on 

installation 


776464 

776465 

18-23 Softail, except 

19-20 FXDRS 114, 22- 

23 FXLRST 

Fitment Note: Does 

not fit with engine 

guard 

18-23 Softail, except 

19-20 FXDRS 114, 22- 

23 FXLRST 

Fitment Note: Does 

not fit with engine 

guard 


Black 

Gloss 

Custom Side Cover Set 


• Easy to mount 

Certification: With Approval , 

Material: ABS , Unit: Pair , Qty.: 1 


914876 09-23 Touring, except 

22-23 FLHXST, 22-23 

FLTRXST 

914877 09-23 Touring, except 

22-23 FLHXST, 22-23 

FLTRXST 

Ready 

to Paint 

Gloss 

Black 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Custom Chin Fairing 


• Easy to mount on existing points 

Certification: With Approval , Material: ABS , Unit: Set , 

Qty.: 1 

Cult Werk Racing Side Cover Adapter Bracket 

for FXDR 

Bracket to adapt Cult-Werk „Racing“ Side Covers to FXDR 

models. 

• Made of steel 

• Black powder coated 

• Installation material included 

Part#: 914881 , Fitment: 19-20 FXDRS 114 , 

Color: Black , Material: Steel , Unit: Each , 

Qty.: 1 


917164 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Gloss 

Black 

917163 13-14 FXSBSE, 14-17 FXSB, 16-17 FXSE Ready to 

Paint 

914875 18-23 Softail, except 18-20 FXFB, 18, 20 FXFBS 

114, 19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 

22 FXRST, 23 FXLRST 

914874 18-23 Softail, except 18-20 FXFB, 18, 20 FXFBS 

114, 19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 

22 FXRST, 23 FXLRST 

Gloss 

Black 

Ready to 

Paint 

Precision Oil Cooler Cover 

• Vertical grille design adds unique custom style to the lower 

frame and maintains ample airflow 



776417 

776418 

17-23 Touring, 17-23 Trike 

Fitment Note: Except twin 

cooled models 

17-23 Touring, 17-23 Trike 

Fitment Note: Except twin 

cooled models 


ABS 

Black Gloss ABS 

Bobber Side Cover 

• Direct fit 

• Perfect surface finish 


901679 14-20 Sportster Ready To Paint ABS 

901680 14-20 Sportster Black Gloss ABS 

901682 04-13 Sportster Ready To Paint ABS 

901683 04-13 Sportster Black Gloss ABS 

Racing Side Cover 

• Direct fit without modifications 


Fits 18-21 FLSL, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 

FLHCS 114 ANV, 18-20 FXLR, 18-20 FXBB, 19-20 FLHC 114, 

20-23 FXLRS, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 22-23 

FXLRST, 22 FXRST, 22-23 FLSB, 23 FLHCSANV Fitment Note: 

For Use With Air Ride Suspension. On FXDRS models, 

bracket 914881 is needed 

PART# FITMENT COLOR DESCRIPTION 

913230 

913231 

913232 

913233 

18 FXBR/S 

For Use With Air Ride 

Suspension 

18 FXBR/S 


Suspension 

18 FXBR/S 


Suspension 

18 FXBR/S 


Suspension 

Ready To 

Paint 

Black Gloss 

Ready To 

Paint 

Black Gloss 

Clean 

Clean 

Slotted 

Slotted 




APPAREL 

SEATS & 

TOURING 

893835 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Arlen Ness Side Covers for 

FXR Models 

Fit all FXR models from 82-94, (and 99 

FXR II and FXR III models) and replace the 

Original Equipment parts. Manufactured 

from high impact black A.B.S. plastic 

which can be painted to match any 

bike. When installed, they fit between 

the frame tubes in the area below the 

seat and cover the brake and electrical 

components. Sold in pairs. 

Bat Wing Side Covers 

• Made of fiberglass. 

893835 XL 04-13 

Oil Tank for Softail Models 

A perfect chrome replacement for the 

Original Equipment oil tank. Fits all Softail 

models from 89-99. 

78307 Replaces OEM 62498-89A 

650224 

LIGHTING 

ELECTRICAL 

EXHAUST 

28258 Plain Side Covers 

INTAKE 

ENGINE 

Chrome Side Covers for FXR 

Models 

Perfectly chrome-plated steel side covers 

to replace the standard plastic covers. Fit 

all FXR models from 82-94. 

25263 FXR Side Covers 

Chrome Oil Tank Cover for XL 

Models 94-03 

This chrome oil tank cover set is made 

of stamped steel and fits over the oil 

tank on 94-03 Sportster models without 

disassembly. 

688198 Oil tank cover set, chrome fits 

94-03 XL models 

Custom Wrap-Around Oil 

Tanks for Big Twins by Santee 

3.5 qt. custom wrap-around oil tanks. 

Available with or without spin-on oil 

filter and in a side fill version. When 

used with an FXE battery they’ll fit rigid 

and 58-64 swingarm frames, and will 

also clear 79-84 4-speed transmissions. 

Includes oil line fittings. 

Side Fill 

650224 Custom 3.5 qt. oil tank with 

push-on hose barbs 

650233 Custom 3.5 qt. oil tank 

650225 Custom 3.5 qt. oil tank with 

push-on hose barbs and spin-on 

filter 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

Chrome Ignition Module 

Cover 

Chromed steel cover replaces the standard 

black metal cover on Sportster models 

from 82-03. 


Chrome 3-Quart Wrap-Around 

Oil Tank by Santee 

These 3-quart oil tanks use the small 

kickstart Sportster battery and fit rigid 

frames and 58-64 swingarm frames with 

aluminum primaries and 79-84 4-speed 

transmissions with steel primaries. 

651264 Chrome 3-quart side fill oil tank 


Chrome Oil Tanks for Softail 

Models by Santee 

Fits 89-99 stock Softail frames and Santee 

Softail style frames. Winged version with 

either a side or center fill. 

‘Winged’ Oil Tanks 

650222 Chrome ‘Winged’ side fill 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Chrome Oil Tanks for Twin 

Cam Softail Models by Santee 

Fits 00-17 Twin Cam Softails. Replaces 

OEM #62498-00A. Does not utilize OEM 

dipstick. Oil plug is included. 

‘Standard’ Oil Tanks 

Fits 00-Up Twin Cam Softails. Replaces 

OEM #62498-00A. 

650245 Chrome side fill 

Custom Oil Tanks for FL/FX 

Models and Santee 4-speed 

Swingarm Frames 

3.5 qt. chrome oil tanks for 66-84 FL and 

FX 4-speed models, that provide easy 

access to the battery, and bolt to the 

stock mounts. They will also fit Santee 

4-speed swingarm frames. Kits include oil 

tank and 2-pc. front mounting bracket 

for an easy installation. 

650219 Chrome side fill with spin-on 

filter 

Chrome Oil Tank for FXR 

Models 

A complete chrome oil tank assembly for 

all FXR models from 82-90 (except 86-up 

FXR Super Glide models). Adds sensational 

style and simplifies oil draining through 

the addition of a second drain hole on 

the left rear of the tank. Included with 

the tank is a remote drain hose fitting 

kit which allows it to be drained from 

the kickstand side through a rubber hose 

which, when not in use, plugs onto a 

frame mounted dummy fitting which is 

included in the kit. Machine polished and 

then triple chrome-plated. Replaces OEMs 

62406-81, 62406-86 and 62414-86. 

28104 Oil tank and remote drain kit 

(this tank has no oil level "sight" 

glass) 

Unpainted Oil Tank for Softail 

Models 

Perfect for custom painting, this original 

style oil tank features heavy gauge steel 

construction and a built in battery box. 

May also be used on most aftermarket 

Softail frames. 

270148 Fits all Softail models from 89-99 

(repl. OEM 62498-89A) 

Chrome Oil Tanks for 


Great looking parts that add a bright 

splash of chrome to the right side of 

Sportster models. Accurate reproductions 

of the Original Equipment parts, they 

replace the stock black units perfectly. The 

ideal complement for our chrome ignition 

module and battery covers. 


650231 

16 270151 

Custom 3 qt. ‘Barrel’ Style Oil 

Tanks by Santee 

These Chrome steel oil tanks were styled 

after the classic ‘Barrel’ tanks on choppers 

from the 60’s and 70’s. They have a 

universal mounting system so they will fit 

just about anything and are available with 

or without a spin-on filter. Kits include 3 

rubber mounts and tank cap. Oil fittings 

not included. 

650231 3 qt. round oil tank 

650232 3 qt. round oil tank with spin-on 

filter 


Oil Tanks for Rigid Frames 

Chrome original style oil tanks for rigidframed 

Big Twins. Available with side or 

center oil fill. Fits Big Twin models from 

36-57. Replaces OEM 62504-38. 

270150 Side fill 

270151 Center fill 

Chrome Replacement Oil 

Tanks 

Duplicates of the Original Equipment oil 

talks finished in brilliant chrome. 

78305 Fits 4-speed FL and FX Big Twin 

models from 65-86 (repl. OEM 

62504-65A)

APPAREL 

SEATS & 

TOURING 

631990 

650229 

Aluminum Oil Tank Drain 

Valves 

Made from ‘6061’ aluminum that has been 

heat-treated to ‘T6’. They permanently 

replace the stock drain plug and fit all 

stock or aftermarket oil tanks with 5/8"- 

18 threads for dramatically simpler oil 

changes. Attach a piece of 1/2" I.D. hose 

to the spigot and turn counter-clockwise 

with a wrench until oil flows into your 

catch pan. Natural finish. Sold each. 

18227 Oil Tank Drain Valve 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

631991 

650230 

500555 

EXHAUST 

Custom Oil Tanks for Twin Cam 

88 Softail Models 

These oil tanks are a perfect way to give 

your new Softail an ‘old school’ look. 

Chromed steel construction with builtin 

battery box. There are two styles 

to choose from, and they fit all Softail 

models from 00-17. Oil fittings not 

included. 

631990 ‘Round’ 

631991 ‘Domed’ 

Chrome Round Oil Tanks for 

Softail Models by Santee 

Fits 86-99 stock Softail frames and Santee 

Softail style frames. Available in a Round 

or Domed version with either a side or 

center fill with built in battery box. 3.5 

Qts. Oil fittings not included. 

Round Oil Tanks 

650228 Chrome Round side fill 

650229 Chrome Round center fill 

Domed Oil Tank 

650230 Chrome Domed center fill 

Drain Plug Repair Kit 

Special oversized drain plug and tap to 

re-thread stripped-out oil tank and motor 

case drain holes with original 1/2"-13 

threads. Replacement oversized plugs are 

also available separately. 

500555 Repair kit 

500556 Plug only (9/16"-18) 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

26397 

DRIVELINE 

633244 633245 

WHEELS, TIRES 

& BRAKES 

Bobber-Style Oil Tanks with 

Battery Box 

Here is a old school oil tank for your 

next bobber bike project. Chrome steel 

tanks with built-in battery boxes come 

with front rubber mount and tank cap 

included. They fit Big Twin rigid frames 

from 36-57 and most custom rigid frames 

on the market today, also 84-99 Softail 

models. Lines come out of the bottom of 

the tank for a nice clean look. Oil fittings 

not included. 

632062 ‘Domed’ oil tank 

270144 

Oil Tank Mounting Kits 

For Softail Models 

Includes chrome front and rear brackets to 

mount oil tanks to most aftermarket and 

Original Equipment Softail frames. 

26397 Complete oil tank mounting kit 

270144 Rear bracket only, chrome 

(replaces OEM 62704-84) 

270147 Front bracket only, chrome 


Chrome Oil Fitting 1/4 NPT x 

90 and Hose Barb 1/4 NPT x 3/8 

Oil line fittings and hose barbs to connect 

oil lines to Santee oil tanks (CCI# 631990- 

91) 

Oil line fitting 

633244 1/4 NPT x 90 

Hose Barbs 

633245 1/4 NPT x 3/8 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



27101 

27100 

Chrome Oil Tank Dipsticks 

Chrome-plated replacements for Original 

Equipment dipsticks. 

27100 With short dipstick for Softail 

models from 84-99 and Sportster 


62595-82A) 

27101 With long dipstick for FL models 

from 70-84, FX models from 

71-85, FXR models from 82-83, 

FLT models from 80-86 and XLCH 


62625-70A) 

Oil Tank Plug 

Chrome-cap oil tank super plug for all 

Original Equipment side-fill oil tanks from 

65-99 and most custom tanks. 


776462 

776426 

776463 

696049 696050 

Brass Oil Tank Plug by 

Kustom-Tech 

• Billet brass machined and polished 

• Stainless steel dipstick 

• To match with the Kustom Tech gas cap 

696049 For Softail models -99 

696050 For Softail models 00-17 

653131 

HKC Billet Aluminum Oil Filler 

Plugs 

High-quality filler plugs from Hells Kitchen 

Choppers in Germany. Outstanding design 

and CNC machining makes them eye 

catching items. Made of billet aluminum 

in several designs.... with polished or 

flat black finishes, and with or without 

dipstick.Polished Versions for Softail 

Models from 84-99 

682020 Iron cross 

682021 Iron cross with dipstick 

Flat Black Versions for Softail Models 

from 84-99 


682124 8 Ball with dipstick 

Polished Versions for Softail Models 

from 00-17 

682033 Iron cross with dipstick 

Flat Black Versions for Softail Models 

from 00-17 

682038 Iron cross 

682125 8 Ball with dipstick 

Precision Dipstick 

• Easy to grip for hassle-free opening and 

tightening 

• Styled to coordinate with the entire 

Precision line of engine covers for the 

Milwaukee-Eight 

Material: Cast Aluminium , Unit: Each 

, Qty.: 1 


776425 17-23 Touring, 17-23 Chrome 

Trike 

776426 17-23 Touring, 17-23 Gloss Black 

Trike 

776462 18-23 Softail Chrome 

776463 18-23 Softail Gloss Black 

Chrome Oil Tank Plugs with 

Dipstick 

Chrome-plated replacement oil tank plugs 

with dipsticks. 

93914 Fits Dyna Glide models from 

91-99 (repl. OEMs 62681-92A and 

62685-95A) 

93924 Fits FLT, FLHT, FLHS and Road 

King models from 93-99 (repl. 

OEMs 62640-93 and 62607-93) 

Oil Temperature Dipstick by 

Daytona 

Oil temperature dip stick surrounded 

by fine chrome cover are designed for 

OEM replacement. The blue-backlit LCD 

readout offers you beautiful looking. 

Overheat warning light flashes when the 

temperature exceeds the manually setup 

temperature. Celsius and Fahrenheit 

selectable. 

• Chrome plated face 

• Blue backlight readout 

• Celsius & Fahrenheit selectable 

• Overheat warning function (Adjustable 

warning temperature) 

• Extendable viewing (10minutes) 

653131 ODS for 00-06 Softails with LCD 

display ROUND (°F or °C) 

653134 ODS for 07-17 FLT models with 

LCD display ROUND (°F or °C) 


APPAREL 

SEATS & 

TOURING 

Oiltank Plug Caps by Hell’s 

Kitchen Choppers for Dyna 

Models 

These items are a bolt on replacement 

for the standard OEM caps. The HKC 

plug covers are mounted in a minute. 

Several designs in either polished or black 

available. The OEM dipstick and cap 

holder with sealing rubber must be reused. 

Sold each. 

681854 HKC polished oiltank plug cap, 

design iron cross for Dyna Glide 

models from 00-05 

681856 HKC black oiltank plug cap, 

design eight ball for Dyna Glide 









design iron eight ball for Dyna 

Glide models from 06-17 


design king crime for Dyna Glide 



design king crime for Dyna Glide 


Custom Oil Filter Mount 

• For use with 3/8“ braided steel or 

rubber oil lines 

• Includes oil line fittings 

• Accepts Evo and Twin Cam spin-on oil 

filters 

Fitment: 92-98 Dyna, 92-99 Softail, 92- 

98 Touring, OEM #: 26378-92A , Unit: 


PART# 

COLOR 

923711 Black 


25460 

Oil Pressure Switch 

Quality replacement oil pressure switch 

for XL and K models 54-76 and Big Twin 

(except Evo) 41-84. Replaces OEM 26552- 

72, sold each. 

688594 Oil pressure switch (repl. OEM 

26552-72) 

270019 

25247 

25248 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

25463 

FRAMES 

Spin-On Oil Filter Kit 

A high-tech replacement for your canistertype 

oil filters. It’s approximately the 

same size as the stock unit and accepts CC 

#25250 chrome spin-on filter to eliminate 

leaks. Makes filter changes clean and easy. 

Comes with both threaded and slip-on 

fittings. Uses our mounting brackets sold 

separately. 

26650 Spin-on filter kit 

25250 Chrome oil filter (replaces OEM 

#63796-77A) 

25464 

Accel Oil Pressure Switches 

American-made units with heavy-duty 

contacts, brass ferrule, thermoplastic 

insulator and a bright finish. 

Fits Sportster and K models from 54- 

76 and Big Twins from 41-84 (except 

EVO). 

25460 Replaces OEM 26552-72 

Fits Sportster models from 77-20 

25463 Replaces OEM 26554-77 

Fits Evolution Big Twin models from 

84-99 (except models with electric oil 

pressure gauge) 

25464 Replaces OEM 26561-84 

Oil Filter Kits 

Full flow automotive style spin-on oil filter 

kits. Each of these custom kits includes a 

chromed heavy-gauge steel bracket, chrome 

disposable oil filter, and all required hoses 

and clamps for installation. 

25247 Fits all 70-78 Big Twins without 

front motor mounted rectifier/ 

regulator (mounts on top of 

front motor mount) 

25248 For all Sportster models 57-77 

(mounts to left front motor 

mount location) 

270019 Fits frame tubes, excellent for 

custom applications 

25250 Chrome oil filter (replaces OEM 

#63796-77A) 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Filter Pac 

Custom oil filter and regulator mount 

designed to clean-up front lower mount 

area. Attaches to the front of the engine. 

Includes a chrome billet aluminum base 

plate, chrome hose fittings and a chrome 

oil filter. Utilizes stock regulator. Fits all 

Softail and 4-speed Big Twin models from 

75-99. 

25270 Complete Filter Pack Kit 

26109 Replacement chrome oil filter 


25543 Replacement Black Oil Filter 

(Replaces OEM 63810-80) 

Chrome Oil Pressure Sender 

Cover Kit by Kuryakyn 

This rubber-lined, easily-installed, die-cast 

cover kit fits all Evolution Big Twins from 

84-99 (except models equipped with 

2-terminal sending units). 

48265 Sold each 

12533 12534 

Original-Style Oil Pump 

Fittings 

Original-style fittings used with some 

custom oil tanks to convert nipples so 

stainless-steel braided lines may be used. 

Set of 3. 

12533 Fit nylon and braided hose 

12534 Fit steel and braided fixed-end 

lines 

RBS oil line fittings for Twin 

Cam models 

When using custom frames with custom 

oiltanks, the RBS oilline fittings make it 

easier to install the oil lines. Available 

in alu-nature and black anodized. Three 

fittings are included in one set, 00-17 Softail 

683138 RBS oil line fittings TC Set of 3, 

ALU 

683139 RBS oil line fittings TC Set of 3, 

black 

Rubber Vibration Resistant 

Mounting Studs 

This is just the answer for custom builders. 

These studs are perfect for mounting gas 

and oil tanks. Sold in packs of 5 (unless 

otherwise noted). 

633244 

633245 

020538 

16050 1/4"-20 x 1/2" stud both ends 


Heavy-Duty Rubber Mounts 

Replacement rubber mount is used for 

mounting Harley battery boxes and oil 

tanks. Made of quality rubber with 1/4"- 

20 x 1/2" long threaded studs and steel 

plates. This mount also works great for 

mounting many custom parts. Replaces 

OEM 62563-65. Pack of 10. 

16055 Heavy-Duty Rubber Mounts 

Chrome Oil Fitting 1/4 NPT x 

90 and Hose Barb 1/4 NPT x 3/8 

Oil line fittings and hose barbs to connect 

oil lines to Santee oil tanks (CCI# 631990- 

91) 

Oil line fitting 

633244 1/4 NPT x 90 

Hose Barbs 

633245 1/4 NPT x 3/8 

20234 

84753 

20235 

Oil Line Fittings 

Chrome fittings used for oil tank, oil 

pump, oil coolers, carb fuel inlet, etc. Sold 

in 5 pack. 

020531 Straight fitting. 3/8" hose to 1/8" 

NPT. Replaces OEM 63533-41 

020533 Straight fitting. 5/16" hose to 

1/8" NPT 

020535 Straight fitting. 5/16" hose to 

1/4" NPT 

020536 90° fitting. 5/16" hose to 1/8" 

NPT. Replaces OEM 62375-57 

020538 Plug – 1/8" NPT (repl. OEM 

42311-58) 

020539 Pipe plug, 1/4" NPT 


Remote Oil Filter Mount by 

CPV 

This part moves your oilfilter just about 

anywhere you want it to be. The two 

mounting studs on the back allow you to 

make a bracket or drill two holes where 

ever you can find the space to. Just add 

fittings (sold seperately in section 16) and 

run your oil lines to the backplate, done! 

683448 Sold each for custom applications 

Oil Line T-Piece and Fittings 

Brass T-piece with 3/8" spigot and chromeplated 

oil line fittings with 1/8" NPT 

thread and 3/8" spigot. Sold each. 

84753 Brass T-piece 

20235 Chrome hose fitting, 3/8" hose. 

(repl. OEM 63533-41) Sold each 

20234 Elbow, 90°

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Crimp Hose Clamps 

OEM style hose clamps. Note: Diameters 

listed are before crimping. Sold in packs 

of 50. 

260485 13/16" (.812) diameter. Fits all 

tank drain hoses (repl. OEM 

10086) 

Mini Hose Clamps 

Quality clamps for all 7/32" to 5/8" O.D. 

hose. 

19883 Card of 24 

19878 Box of 10 

380351 

380353 

380301 

380300 

Hose Separators 

Available in plain or ball milled to match 

our other custom accessories, these diecast 

hose separators will fit 3/8" or 5/16" 

I.D. rubber or stainless steel oil and fuel 

lines on Big Twin and Sportster models. 

Sold each. 

PLAIN BALL MILLED COLOR 

380300 78396 Chrome 

380301 380351 Polished 

380302 Blue 

380303 380353 Black 

380303 

380302 

380352 

Chrome Hose Ends by 

Goodridge 

Embossed with the Goodridge name and 

logo and plated in durable show quality 

chrome, these hose connections feature 

smooth, tight tapers for close fitment, yet 

retain hex wrench adjustability. Includes 

stainless worm drive clamps. Sold in packs 

of six. 

14975 Fits 1/4" braided hose 

14976 Fits 5/16" and 3/8" braided hose 

270608 

270607 

270609 

270606 

Custom Hose Clamps 

These custom hose clamps feature a great 

look with reliable function. Under each 

custom hose cover is a weather resistant 

worm-drive hose clamp. Sold in packs of 6. 

270606 3/8"-diameter. Slotted 

270607 1/4"-diameter. Slotted 

270608 3/8"-diameter. Grooved 

270609 1/4"-diameter. Grooved 

Custom Hose Clamps 

Fits over oil and fuel lines. Available with 

chrome or blue anodized finish. Sold in 6 

packs. 

270600 Chrome. Fits 3/8" and 5/16" I.D. 

hoses (up to 5/8" O.D.) 

270604 Blue. Fits 3/8" and 5/16" I.D. 

hoses (up to 5/8" O.D.) 

270601 Chrome. Fits 1/4" I.D. hose (up to 

1/2" O.D.) 

270605 Blue. Fits 1/4" I.D. hose (up to 

1/2" O.D.) 


Custom Hose Clamps by Namz 

Cycle Products 

Custom colored hose clamps designed 

for use with braided copper and stainless 

steel hoses but will also work with most 

braided rubber hoses. Made from brass 

and finished off with a matte metallic 

powder coated finish. Available in a 

Copper, Silver, Brass, and Black finish. Sold 

in packs of 6. Made in the U.S.A. 

Fits 1/4” and 5/16” Fuel Line 

664124 Copper 

664126 Black 

664127 Brass 

Fits 3/8” Oil Line 

664128 Copper 

664129 Silver 

664130 Black 

664131 Brass 

380305 

Triple Hose Separator 

Keep lines neatly bundled with these 

separators fit 3/8" or 5/16" rubber or 

stainless steel hoses. Secures with flush 

sockethead screws. 


380355 Chrome ball milled 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


614050 

614036 

614048 

614004 

RevTech Custom Oil Lines 

Pre-assembled oil lines are perfect for custom applications. They 

feature chrome-plated steel fittings and -6 stainless steel braided 

hose. 

614036 9” pre-assembled universal S/S braided oil line 




614041 16” pre-assembled universal S/S braided oil line 






Goodridge “All Black 210 Oil Line Kits” 

All black oil line kits for V-Twins. Featuring our premium black 

braided oil hose. Hose has outer fabric braided cover with 

stainless braided core, coated with a neoprene inner lining. Kits 

ship complete with black anodised hose clamps. 

614004 *6 ft 210 Oil Line Kit 

614005 **12ft 210 Oil Line Kit 

614006 210 Black Braided Oil Hose, 6ft 

614007 210 Black Braided Oil Hose, 12ft 

614008 3/8” Black Hose Finishers - 6 Pak 

614009 3/8” Black Hose Finishers - 10 Pak 

*Contains 6 ft of 210 hose and 4ea Black Hose Finishers 

**Contains 12 ft of 210 hose and 8ea Black Hose Finishers 

260530 

Goodridge Custom Stainless Steel Oil Line and 

Fittings 

Custom oil lines are made simple with Goodridge’s new do-it-yourself 

reusable oil line components. This new system utilizes the same chrome 

steel fittings Goodridge is known for, but in a user-friendly format that 

allows you to make your own kit. These ground breaking fittings are 

coupled with their stainless steel braided PTFE lined hose and can be used 

to assemble oil line kits for virtually any Big Twin on the road. 

610250 12Ft roll –6 stainless Teflon hose 

610251 Chrome oil tank stub fitting 

610252 Chrome straight oil fitting 1/8 NPT 

610254 Chrome 90 degree oil fitting 1/8 NPT 


Stainless Steel Braided Hose 

Sold in 25 ft. rolls. 

260530 1/4" ID x 25’ 

260532 5/16" ID x 25’ 

260534 3/8" ID x 25’ 


APPAREL 

28015 

SEATS & 

TOURING 

28016 

FOOT 

CONTROLS 

Copper 

Copper 

Stainless Steel 

HAND 

CONTROLS 

LIGHTING 

Chrome Rocker Oil Lines 

Chromed rocker box oil lines for Sportster 

models and Shovelheads. Includes 

complete set of two oil lines, fittings and 

seals. 

Black Flex 

ELECTRICAL 

28015 Fits Shovelheads 66-84 (repl. 

OEMs 62783-66A, 62785-66A) 

28016 Fits Sportster models (except 

magneto models) from 57-85 

(repl. OEM 17324-57A) 

Rocker Box Oil Line Fittings 

Includes chrome fittings and seals for the 

rocker box oil lines on all Sportster models 

and Shovelheads 57-85. 

010421 Sold in pairs (repl. OEMs 63527- 

57A, 63526-57) 

Brass 

Flex Braiding 

• Best protection 

• “Old School” look 

• 25 foot roll 

Copper 

670032 1/2” ID 

max 

893417 3/4” ID 

max 


670030 1/2” ID 

max 

max 

893412 3/4” ID 

max 

Black Flex 

893373 1/4” ID 

max 

893374 3/8” ID 

max 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

12427 

12428 

670031 3/4” ID 

max 

Brass Steel 

893411 1/2” ID 

893375 1/2” ID 

max 

893376 3/4” ID 

max 

TRANNY & 

CLUTCH 

Overhead Rocker Arm Oil 

Lines 

Set of two stainless steel braided oil lines 

with chrome NPT fittings. 

12427 Fits 66-84 Shovelheads 

12428 Fits 57-85 Sportster models 

Pimpin´ Hose 

• Reinforced rubber hose braided 

• “Old School” look 

• 25 foot roll 

Copper 

893413 1/4” ID, fuel line 

670039 5/16” ID, fuel line 

670040 3/8” ID, oil line 


893418 1/4” ID, fuel line 


22231 3/8” ID, oil line 

Brass 

893409 1/4” ID, fuel line 


670858 3/8” ID, oil line 

Namz Clear Heat Shrink 

Tubing 

• Made of durable PVC 

• Used with braided lines to protect 

painted finishes 

• Will not fade, turn yellow, or crack 

• Shrinks to half of its original size 

• Sold in 25 foot spools 

Clear 

Black 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

670033 1/4" I.D. 

893382 3/32” I.D. 

670034 5/16" I.D. 

670035 3/8" I.D. 

893381 3/16” I.D. 

893379 1/8” I.D. 

LUBRICANTS & 

CHEMICALS 

670036 1/2" I.D. 

893378 1/4” I.D. 

670037 3/4" I.D. 

893380 3/8” I.D. 

893377 1/2” I.D. 

TOOLS & 

EQUIPMENT 



Hoses Bending Spiral by Cohline 

Fuel and oil hoses are going easily bent in each wanted retain shape (approx. 60 mm wide) 

889120 1/4” (6,3 mm) inside diameter, stainless steel 

889121 5/16” (7,9 mm) inside diameter, stainless steel 

889122 3/8” (9,5 mm) inside diameter, stainless steel 

889123 1/2” (13 mm) inside diameter, stainless steel 

889121

Section 16 Custom Chrome Europe Catalog 2024

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?