Section 15 Custom Chrome Europe Catalog 2024

15 

FORKS & SHOCKS 

www.custom-chrome-europe.com

635065 

Wide Springer 

08631 

Narrow Springer 

Narrow Springer Forks 

Reinforced top and bottom trees reduce flex and improve 

handling. They feature TIG welded alloy steel construction for 

strength and durability. Kit includes main springs, fork legs, 

neck, top nut, crown nut, rocker assemblies with brass bushings 

and top clamp. Fully chromed, or black with chrome rockers, 

top clamp and springs. They fit all cast neck Big Twin models 

from 49-Up with 1“ neck bearings (except FXR, Dyna Glide 

and Touring models), and require the use of risers with 1/2“-20 

mounting bolts. 3/4“-diameter axles. 

Note: Use the sizing chart below to determine which length would be the best part number for 

your particular application. 

Narrow Springer 

Forks 

Chrome 

635064 - 2“ 

635062 Stock 22“ 

635063 + 2“ 

Accessories 

640662 Shock kit, chrome 

640663 Shock kit, black 

632970 Fender brackets for -2" to +8" forks, chrome 

632972 Fender brackets for +10” to +18” forks, chrome 

632971 Fender brackets for -2" to +8" forks, black 

632973 Fender brackets for +10" to +18" forks, black 

160879 Top clamp Glide-style, 4 3/4" centerline (includes pinch 

bolts) 

08640 Axle kit with axle, spacers, nuts, and speedometer drive 

adaptor for 84-99 single flange wheels 

652112 Rocker, left chrome 

652113 Rocker, right chrome 

Black and Chrome 

635067 - 2“ 

635065 Stock 22“ 

635066 + 2“ 


652112 652113 

WHICH FORK FOR YOUR BIKE?? 

Measure the fork currently on your bike and use the chart below. 

All measurements should be taken from the lower stem bearing 

cup to the axle center. 

If Your Stock Front Fork Measures: 

19“ to 21“ you should use the 2“ under stock assembly 

21“ to 23“ you should use the Stock 22“ assembly 

23“ to 25“ you should use the 2“ over stock assembly 

25“ to 27“ you should use the 4“ over stock assembly 

Using the same formula, you can pick the right fork all the way 

up to our 18“ over stock units! 

640662 640663 

Riser Studs for Springer by Lowbrow 

These springer riser studs have 1/2”-20 thread on half the 

length to thread into your springer, and 1/2”-13 thread on the 

remainder on which to mount your risers. Cad plated. 

655838 Springer Riser Studs 1/2”-13 x 1/2”-20 half of stud is 1/2”- 

13 thread half is 1/2”-20. 

655839 Springer Riser Studs 1/2”-20 x 1/2”-20 all 1/2”-20 thread 

15.2 

Attention! Articles marked with the APPROVAL-sign do not necessarily cover all H-D and Indian models and years. Before ordering please check if your bike is listed in 

the approval certificate. Please contact your CCE dealer or our sales support. In case of any complaints we do not grant any warranty and will not withdraw those parts.

APPAREL 

Wide Outline Springer Fork 

• Fork stem with offset 

• Reinforced top and bottom trees reduce flex and improve handling 

• TIG welded alloy steel construction for strength and durability 

• Kit includes main springs, fork legs, neck, top nut, crown nut, rocker assemblies with brass bushings and top 

clamp 

Fitment: 84-23 Softail, 91-17 Dyna, 80-20 Sportster , Fitment Note: for some frames it 

may be necessary to use an internal steering stop. Material: Steel , Unit: Each , Qty.: 1 

FITMENT DESIGN DESCRIPTION BLACK 

POWDER 

COATED 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

84-23 Softail, 91-17 Dyna, 80- 

20 Sportster 

+10“ Wide Outline 32“ Lower Stem Bearing Cup 

to Axle Center 









-2“ Wide Outline 20“ Lower Stem Bearing Cup 


22“ Stock Wide Outline 22“ Lower Stem Bearing Cup 


-4“ Wide Outline 18“ Lower Stem Bearing Cup 


CHROME 

921474 921475 

921466 921467 

921468 921469 

921470 921471 

921472 921473 

921462 921463 

921464 921465 

921460 921461 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

160639 

160638 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

for more details check www.custom-chrome-europe.com 

Single Disc 41 mm Front Fork Assemblies for 

Softail Models from 84-99 

Our single disc front end assemblies come complete with chrome 

upper and lower triple trees, hard chrome stock-length fork 

tubes, springs, dampeners and all internal components. Perfect 

for scratch builders or chrome conversions on late Softail models. 

Direct replacement for Original Equipment parts, that accept 

stock headlights, risers, fork trim, fenders and axles. Available in 

both styles with a choice of chrome or polished aluminum lower 

legs. 

For FX Softail Models from 84-99 

160638 Polished lower legs 

For FL Softail Models from 86-99 

160639 Polished lower legs 

160739 Chrome lower legs 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 

15.3

‘Good Guys’ front forks by Rick’s 

619455 Wide Glide 250 -4” / 728mm DF 0° black 

619456 Wide Glide 250 -4” / 728mm DF 0° polished 



619459 Wide Glide 250 -4” / 728mm SF 0° black 

619460 Wide Glide 250 -4” / 728mm SF 0° polished 











Rick’s calipers for ‘Good Guys’ forks 

619471 6 Piston left, 11.5“ disc, black 

619472 6 Piston left, 11.5“ disc, polished 

619473 6 Piston right, 11.5“ disc, black 

619474 6 Piston right, 11.5“ disc, polished 

619475 6 Piston brake pad set 

Rick’s caliper brackets for ‘Good Guys’ forks (for using standard 

calipers) 


619480 For 11,5“ brake rotor left, polished 

619481 For 11,5“ brake rotor left, black 

619482 For 11,5“ brake rotor right, polished 

619483 For 11,5“ brake rotor right, black 

Rick’s classic risers for ‘Good Guys’ forks 

619476 25,4 mm kit polished 

619477 25,4 mm kit black 

619478 30 mm kit polished 

619479 30 mm kit black 

V-Rod Headlight and matching Headlight Bracket for ‘Good Guys’ 

Forks 

619486 V-Rod OEM Headlight, raw 

619484 Headlight bracket, polished 

619485 Headlight bracket, black 

Fendermount smooth 

619567 GG smooth fender mounts 

Headlight 619486 

with polished bracket 

619484 


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

New ‘Good Guys’ Front Fork for Softail Models by Rick’s 

New 3D CNC designed and machined fork from Rick‘s in Germany. 250 mm Wide Glide fully covered fork with 0° or 3° rake in 

standard, -2” or -4” length. Fork tubes are hardchrome and come with OEM sealings and internal components. Choose in the fork 

menu below your version in black or polished with 25 mm axle (ready for ABS) as single or dual flange version. Please add the 

components you want to order along with the fork to complete your style. The 6-piston calipers are bolt-on. Caliper brackets are 

needed when a standard brake caliper is mounted. The fork includes progressive wound fork springs, standard headlight bracket 

and standard front fender bracket. Furthermore Rick’s offers a perfect matching V-Rod headlight, headlight bracket, classis risers and 

custom front fender mounts. 

‘Good Guys‘ Wide Glide 250 mm front fork. Select your style below: 

Fork Finish 

6-Piston Bolt-On Calipers for 11,5” 

Polished.................................................... 

rotors 

Single left................................................. 

Black anodized........................................ 

Single right.............................................. 

Fork Rake 

0°..................................................................... Dual.......................................................... 

3°..................................................................... 

Polished.................................................... 


Fork Length 

Caliper Brackets for Standard Brake 

Standard, 830 mm................................... 

Calipers 

Minus 2”, 779 mm................................... 

Left side bracket...................................... 

Minus 4”, 728 mm................................... 

Right side bracket................................... 

Flange 

Left and right side brackets.................... 

Single....................................................... Polished.................................................... 

Dual.......................................................... Black anodized........................................ 

Matching Risers 

For 1” handlebars.................................... 

For 30 mm handlebars............................ 

Polished.................................................... 


V-Rod OEM Headlight and ‘Good 

Guys’ Headlight Bracket 

V-Rod OEM headlight, raw..................... 

Headlight bracket, polished................... 

Headlight bracket, black anodized........ 

Fender Mounts 

Standard.................................................. 

Custom Smooth....................................... 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 


Performance 2 Club Style Upper Triple Tree 

• 3D CNC milled 

• Fork tubes adjustable up to 10 mm higher 

• Including mounting bolts, bezels and lamp mount (Low Rider 

S) 

Part#: 925307 , Color: Black, Anodized , Material: 

Aluminium , Unit: Each , Qty.: 1 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


JOS EASY2 Triple Trees for HD XL / FXR / FXD 

models, polished 

• 250mm wide 

• 0° rake / 5° rake rake 

No disconnecting of wires and brake lines because of the Easy2 

system 

683359 JOS „EASY2“ Triple tree HD39 0° rake XL/FXR/FXDL 88-99 

683360 JOS „EASY2“ Triple tree HD39 5° rake XL/FXR/FXDL 88-99 

683361 JOS „EASY2“ Triple tree HD39 0° rake XL/FXDL 00-03 

683362 JOS „EASY2“ Triple tree HD39 5° rake XL/FXDL 00-03 

683363 JOS „EASY2“ Triple tree HD39 0° rake XL2 04-07 

683364 JOS „EASY2“ Triple tree HD39 5° rake XL2 04-07 

683365 JOS „EASY2“ Triple tree HD39 0° rake 08-20 Sportster, 

except 10-20 XL1200X, 08-10 XR1200, 10-13 XR1200X, 

11-20 XL1200C, 13 XL1200C ANV, 13-16 XL1200CA, 13-17 

XL1200CB, 16-20 XL1200CX, 18 XL1200X ANX, 19-20 

XL1200XS 

683366 JOS „EASY2“ Triple tree HD39 5° rake 08-20 Sportster, 

except 10-20 XL1200X, 08-10 XR1200, 10-13 XR1200X, 

11-20 XL1200C, 13 XL1200C ANV, 13-16 XL1200CA, 13-17 

XL1200CB, 16-20 XL1200CX, 18 XL1200X ANX, 19-20 

XL1200XS 

15683367 JOS „EASY2“ Triple tree HD39 0° rake FXDL 04-05 

683369 JOS „EASY2“ Triple tree HD49 0° rake FXD Street Bob 

06-17 

Triple trees for HD FXST models, polished 

• 250 mm wide 

• 0° rake / 5° rake rake 


system 

683370 JOS „EASY2“ Triple tree HD41,2 0° rake FXST 84-99 

683371 JOS „EASY2“ Triple tree HD41,2 5° rake FXST 84-99 

683372 JOS „EASY2“ Triple tree HD41,2 0° rake FXST 00-15 

683373 JOS „EASY2“ Triple tree HD41,2 5° rake FXST 00-15 

Triple Trees Black by JOS 


• 0° / 5° rake0 

889370 84-99 FXST Softail, 0° 889379 08-20 Sportster, 

889371 84-99 FXST Softail, 5° 

except 10-20 XL1200X, 

08-10 XR1200, 10-13 

889372 00-15 FXST Softail, 0° 

XR1200X, 18 XL1200X 

889373 00-15 FXST Softail, 5° 

ANX, 19-20 XL1200XS, 

889374 86-99 FXD, FXR, XL, 0° 

0° 

889375 00-03 FXD, FXR, XL, 0° 889380 08-20 Sportster, 

except 10-20 XL1200X, 

889376 00-03 FXD, FXR, XL, 5° 

08-10 XR1200, 10-13 

889381 04-07 FXD, 0° 

XR1200X, 18 XL1200X 

889382 04-07 FXD, 5° 

ANX, 19-20 XL1200XS, 

889383 06-17 FXDB, 0° 

5° 

889377 04-07 XL, 0° 

889384 10-15 XL1200X, 0° 

889378 04-07 XL, 5° 

889385 10-15 XL1200X, 5° 

Polished JOS EASY2 

Triple Tree with Full 

Covers 

Fits HD XL / FXR / FXD models 

• 250mm wide 

• 0° rake 

• Fully 360° rake covers for the forkleg between the triple trees 


system 

683376 JOS „EASY2“ Triple tree with full covers HD39 0° rake 

FXD 04-05 

683377 JOS „EASY2“ Triple tree with full covers HD49 0° rake 

FXD Street Bob 06-17 

Fits HD FXST models 


• 0° rake 

• Fully 360° rake covers for the forkleg between the triple trees 


system. Fork sliders needs to be milled down to 62mm. 

683378 JOS „EASY2“ Triple tree with full covers HD41,2 0° rake 

FXST 84-99 

683379 JOS „EASY2“ Triple tree with full covers HD41,2 0° rake 

FXST 00-17 




APPAREL 

SEATS & 

TOURING 

Jos “Easy2” Upper Tripple Tree, polished 

• Used to replace triple trees with cast on risers 

• 250 mm 

• 0° rake 

683608 Fits all 06-17 FXDB Models 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

JOS ‘Bone’ 39 mm Fork Conversion Kits with 

Approval 

These billet kits will convert your 88-11 Sportster, FXR or Dyna 

Glide model with 39 mm fork tubes to the width of a Wide 

Glide front fork. The upper and lower trees are CNC-machined 

with grooves and highly-polished to a unique bone-shape. 

They’re available in stock or 5° rake versions and come with all 

necessary parts for a quick conversion. Every kit includes the 

axle, fender spacers, a disc rotor spacer and stainless steel bolts. 

A second rotor spacer is required if you have a dual disc model. 

The steering stems are pressed into the lower plate and doublelocked 

with a set screw. The fork stop, headlight mount and 

riser holes are pre-drilled for your convenience. A stem nut is not 

included, but any aftermarket nut with 5/8“-18 x 1“ thread can 

be used. We recommend the use of +2“ over length fork tubes 

with the 5° rake kit to retain the stock ride height. If you re-use 

the stock length tubes you will lower the front of the bike. 

For 04-05 Dyna Glide Models 

687007 5° rake 

Conversion kit Wide Glide for 08-20 Sportster, except 

08-10 XR1200, 10-13 XR1200X, 16-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 19-20 XL1200XS, 00-17 Dyna, 

except Wide Glide 

682873 Stock rake 

682874 5° rake 

Related Parts 

84595 Brake rotor spacer for 88-99 Sportster, 87-94 FX Model, 

91-99 Dyna, except 93-99 FXDWG (each) 

686950 Brake rotor spacer for 00-20 Sportster, except 08-10 

XR1200, 10-13 XR1200X, 16-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 19-20 XL1200XS, 00-17 

Dyna (each) 

Upper Triple Tree Clamp for Blackline Models 

with Approval 

Made of billet aluminum with Approval, for FXS models 11-13 

(41,2 mm ø) , black. Includes a speedo bracket (for OEM speedo), 

riser mounting hardware for 1/2” risers and offers the possibilty 

to use aftermarket risers and handlebars. 

619636 Upper triple tree 

RST Smooth Wide Glide Conversion Kit for 

FXD, FXR and XLH Models 

New ‘smooth style’ triple trees with covers are beautifully 

manufactured from billet aluminum and then highly polished. 

They fit all FXD, FXR and XLH models with single discs 

applications and RST fork leg sets. The top tree has a cut-out for 

the wiring harness. 

686197 0° rake for FXD, FXR and XLH models 88-99 

Custom Chrome Triple Tree Kits with Approval 

for Wide Glide Forks 

Both trees are CNC-machined from 28 mm-thick billet aluminum. 

The upper tree features a cut-out for the wiring harness. The 

fork stop and all hardware is made from stainless steel. 

86143 Stock rake for all Original Equipment or aftermarket 41 

mm forks 

Wide Glide triple tree kit for Big Twins 

682875 00-17 

682879 5° rake for all Big Twin models 84-99 Approval, except 

Touring 

682880 5° rake for 00-17 Softail with 41mm fork tubes 

Related Parts 

09625 Bearing Jam nut. Sold each 

09652 Acorn stem nut (sold each) 

12264 Timken bearing (sold each) 

25279 Chrome dust shield set 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




Polished Custom Chrome 39 

mm Fork Conversion Kits 

These kits will change your stock front 

end to the width of a Wide Glide front 

fork, and include a stainless steel fork 

stem with a hole for the steering lock, 

axle and spacers, brake rotor spacer and 

extended bolts. They are available in stock 

rake for single disc models. If dual discs 

are required, an additional brake rotor 

spacer kit is available separately. The 

upper and lower trees are machined from 

28 mm-thick aluminum plate. The fork 

stem, fork stop and hardware are made 

from stainless steel. 

86142 Stock rake for all Sportster, FXR 

and Dyna Glide models with 39 

mm fork tubes from 88-99 

686168 5° rake for all Sportster, FXR, 

FXDL and Dyna Glide models 

with 39 mm fork tubes from 

88-99 

686002 Stock rake for all Sporty 00-03 



686169 5° rake for all Sportster, FXDL 



687000 Stock rake for all Sportster models 


04-07 

687001 5° rake for all Sportster models 


04-07 

687002 Stock rake for all Dyna Glide 

models with 39 mm fork tubes 

from 04-05 

687003 5° rake for all FXDL, Dyna Glide 

models with 39 mm fork tubes 

from 04-05 

682877 Stock rake for 08-20 Sportster, 

except 16-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 

19-20 XL1200XS, 08-10 XR1200, 

10-13 XR1200X 

682878 5° rake for 08-20 Sportster, 

except 16-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 

19-20 XL1200XS, 08-10 XR1200, 

10-13 XR1200X 

Related Parts 

84599 Stem bolt (each) 

686004 Rotor spacer for dual disc models 

from 87-99 

686003 Rotor spacer for dual disc models 

00-20 

7&7 Raked Trees Kit for 

Touring models 

• Designed to work with 23” and 21” 

wheels only (stock diameter wheels will 

not handle correctly) 

• 21“ wheels provide 6-1/8“ of trail 

• Triple Trees are machined from forged 

6061-T6 billet aluminum and then 

finished in black anodized 

• Each kit includes top and bottom 

tree, pressed in Steel Stem, lower Fork 

Bearing and Travel Limiters. 

• Batwing style Fairings maintain stock 

position and do not require angled 

headlight wedges or special brackets to 

properly adjust headlights. 

654165 For 14-23 Touring models 

Note: The larger the wheel, the less fork travel. Always check 

lower tree to fender clearance. For 2014, we have added 

travel limiters. 

Triple Trees with 7° Rake by 

Rick’sfor FLH Models 

Precision CNC made triple trees with 

7° rake allows front wheel conversions 

of 23“ or 26“ on Touring models. We 

recommend to use more progressive fork 

springs. No modifications of the frame 

and a perfect handling of the bike even 

at top speed. Comes including fork stops. 

See also the new Rick’s nacelle (619433) 

which is lowered by 7° as a perfect match 

to this triple tree. 

619432 Raked touring triple tree 97-13 

E-Glide/Street-Glide 7° 

642954 Raked 7° Touring triple tree by 

Rick’s 14-23 Touring 

Note: For use with 21“ and 23“ wheels. Use of progressive 

fork springs recommended 

642988 Raked 7° Touring triple tree by 

Rick’s for 14-23 Touring 

Note: For use with 26“ wheels. Use of progressive fork springs 

recommended 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

Thunderbike 26” Touring Kit with Approval 

Update your Bagger with this combination of 26“ front wheel and the triple tree for Touring models 09-13. Several front wheel 

finishes are available below as well as matching brake rotors. All parts are Approval! 

619406 Triple tree for Touring models 09-13 (except Road King and Road Glide models) 

619564 Triple tree for Road King models 09-13 

619407 Thunderbike front wheel „Daytona“ 3.75x26, bicolor dual flange incl. hub and bearings 

619409 Thunderbike front wheel „Daytona“ 3.75x26, black gloss dual flange incl. hub and bearings 

619410 Thunderbike front wheel „Daytona“ 3.75x26, flat black dual flange incl. hub and bearings 

619565 Touring steel front fender for 26” front wheels 

Note: Wheels are no stock items and will be ordered on demand When OEM brake discs will be re-used you need to drill the holes to 10 mm. The included brake rotor screws are metric thread and 

MUST be used!0 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

Bolt-On Bagger Rake Kit Daytona for Harley-Davidson Touring Models 

Allows the use of 26” front wheels without changing height and angle of the fairing. The distance between rider and fairing is 

almost the same than stock. 

607925 For 14-23 Street Glide and E-Glide models 

607926 For 15-23 Road Glide models 

917134 For 14-23 Road King 


LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Triple Trees are 250 mm wide 

889698 

889708 

889703 

889709 

Triple Tree Rake ° 

Frame Rake ° 

Ritz Triple Trees with 13° Rake with Approval 

Ritz triple tree with 13° rake for 41mm or 49 mm fork tubes contains weld on steering lock, triple trees, 200 mm fork tube extensions 

(raw steel) and fork tube sleeves aluminum polished (to be placed between the triple trees). An ideal solution to build a long fork 

15chopper. The additional 13° rake of the Ritz triple tree allows to build up real long fork bikes. The front wheel adapter kits are 

available separately depending on model and front axle size. Always check ground clearance of the bike after conversion under 

brake and cornering circumstances. 

For 41 mm forks 

889698 Fits all H-D models -88 with steering head bearing cups and 41 mm fork tubes 

889699 Fits all H-D models 89-05 without steering head bearing cups and 41 mm fork tubes 

For 49 mm forks 

889700 Fits all H-D models 06-17 without steering head bearing caps and 49 mm fork tubes 

Front wheel adapters 

889707 Ritz, front wheel adapter kit for brake caliper, front fender, incl. front axle (25,4 mm), for 49 mm forks on FXDB models 06- 

889708 Ritz, front wheel adapter kit for brake caliper, front fender, incl. front axle for FLST, FLSTC 84- ; FLSTF 90- 

889794 Ritz, front wheel adapter kit for brake caliper, front fender, incl. front axle (25,0 mm axle)v 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

SP-S Triple Tree Kit 

• CNC milled from aluminum 

• Black cut finish 

• Set consists of upper and lower triple tree 

• 1 1/8“ (28,6mm) handlebar clamp diameter - not compatible with OEM Handlebar 

Part#: 923637 , Fitment: 21-23 Sportster S RH1250S , Color: Black Cut, Anodized , Description: For 1 1/8“ handlebars , 

Certification: With Approval , Clamp ø: 1 1/8“ , Unit: Set , Qty.: 1 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

Early Big Twin Triple Trees 

Fit all 4-speed Big Twin models from 49-84. Styled after 60- 

84 triple trees and drilled and tapped for slider covers and 

early headlight, but with late-style, 4-piece rubber handlebar 

bushings. 

13027 Chrome set 

13028 Black set 

13056 Chrome upper clamp only 

13057 Chrome lower clamp only 

13059 Black lower clamp only 

Note: The top trees are not drilled and tapped on the backside for headlight tins. Bottom trees 

have no padlock tab. 13057 and 13059 include stem. 27 


Chrome Triple Tree Sets 

Chrome replacement triple tree sets include upper and lower 

tree, pinch bolts, and dust cover. Completely interchangeable 

with Original Equipment trees. 

13090 Fits FL Softail models from 84-99, Approval 

13091 Fits FX Softail models from 84-99 and aftermarket cast 

neck frames, Approval 

Components for FL Softail Models 

Individual upper and lower trees for all models from 86-99 

(except FLSTS). 

09330 Upper (repl. OEM 45456-86A) 

09331 Lower (repl. OEM 45605-88), Approval 

Components for FX Softail Models 

Individual upper and lower trees for FX Softail models from 84- 

99 and aftermarket cast neck frames 

100132 Upper (repl. OEM 345672-80) 

100118 Lower (repl. OEM 45665-80A and 45665-84A) 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


CPV 3 Degree Raked Frame 

Cups 

Precisely machined from stainless steel. 

These cups will give your fork an extra 3 

degrees of rake and kick out your front 

wheel for that long look. May cause riser 

to tank clearance issues depending on 

application. 

683446 Fits Big Twins from 49-88 and 

most custom frames 

160036 

13098 160003 

Chrome Frame Cups and 

Bearings for 78-81 Sportster 

Models 

160036 Chrome frame cups ONLY (repl. 

OEM 48310-78) set of 2 

160003 Replacement bearing race only 

for 82-20 Sportster, 60-23 Big 

Twin, except 14-23 Touring, 14-23 

Trike, 21-23 Sportster RH, 21-23 

Pan America, 15-20 Street 

13098 Replacement lower Timken bearing 

ONLY 

160003 12264 

Neck Bearings and Races 

12264 Replacement bearing only for 

82-20 Sportster, 60-23 Big Twin, 

except 14-23 Touring, 14-23 Trike, 

21-23 Sportster RH, 21-23 Pan 

America, 15-20 Street sold each 

619310 Replacement bearing deep 

groove for 82-20 Sportster, 60-65 

Panhead, 66-84 FL Shovel, 71-84 

FX Shovel, 85-94 FX Model, 

91-17 Dyna, 84-23 Softail, 85-13 

Touring, 09-13 Trike, 15-20 

Street, 21-23 Pan America, 21-23 

Sportster RH, replaces OEM 

48315-60, each 



Polished Stainless Internal 

Fork Stop Kit by Pro-One 

Innovative system uses special fork cups 

that provide positive fork stops that are 

completely invisible. Bolt-on option for 

Pro-One billet triple trees, other trees may 

require minor modification. 

65269 Includes bearing cups, stop and 

dust cover, 60-88 Big Twins 

Polished Stainless Steel 

Internal Fork Stop Kit 

These kits come with a highly polished 

fork cup with a nice looking stepped 

design on them. These are a must for 

custom frames that need frame cups. They 

are complete with bearings, cups, races, 

stop and dustcover. Fit 49-88 OEM frames 

and most aftermarket frames. 

640721 Complete kit 

Chrome Frame Cups, Bearings 

and Bearing Races 

For Big Twin Models 

12263 Timken-style chrome cups with 

races ONLY for Big Twins (except 

Springer Softail models) from 60-88 

(repl. OEM 48311-60) set of 2. 

Also fits 49-59 Big Twins when CC 

#12264 bearings are used 

12264 Replacement Timken bearing ONLY 

for 82-20 Sportster, 60-23 Big Twin, 



America, 15-20 Street 

26135 Replacement races ONLY for 82-20 

Sportster, 60-23 Big Twin, except 

14-23 Touring, 14-23 Trike, 21-23 

Sportster RH, 21-23 Pan America, 

15-20 Street 

For Sportster Models 


for Sportster models 78-81 (sold 

each) 


for82-20 Sportster, 60-23 Big Twin, 



America, 15-20 Street 

26135 Replacement races for 82-20 

Sportster, 60-65 Panhead, 66-84 FL 

Shovel, 71-84 FX Shovel, 85-94 FX 

Model, 91-17 Dyna, 84-23 Softail, 

85-13 Touring, 09-13 Trike, 15-20 

Street, 21-23 Pan America, 21-23 

Sportster RH, replaces OEM 48315- 

60, set of 2 

SKF Frame Neck Bearing and 

Race for Touring Models 14- 

Replacement bearing and race for frame 

necks on Touring models 14-23. Quality 

made in Germany (sold each). 

642830 Repl. frame neck bearing & race 

for 14-23 Touring, 14-23 Trike 

Wheel Conversion Kit by 

Custom Cycle Engineering 

Contains everything needed to adapt 

Narrow glide wheels to 84-99 single disc 

Wide Glide forks. Includes axle, spacers, 

custom disc spacer and hardware. 

46935 Fits Narrow Glide wheels from 

84-99

09627 

APPAREL 

SKF Neck Bearing and Cone 

High-quality frame neck bearing and cone 

for 82-20 Sportster, 60-23 Big Twin, except 

14-23 Touring, 14-23 Trike, 21-23 Sportster 

RH, 21-23 Pan America, 15-20 Street. Sold 

each. Race included. 

09625 

09626 

SEATS & 

TOURING 

FOOT 

CONTROLS 

85140 Replaces OEM 48300-60 

Disc Rotor Spacers by Custom 

Cycle Engineering 

One of the tricks in converting to Mid 

Glide or Wide Glide forks, is using the 

correct spacer for disc brake rotors. Made 

from chrome-plated billet aluminum. 

60257 For 39 mm mid glide forks from 

00-20(15/16"-thick) 

46913 For 39 mm mid glide 87-99 

60256 For 39 mm Wide Glide forks from 

00-05 (17/16"-thick) 

46914 For 39 mm Wide Glide forks 

87-99 

46916 For 35 mm mid glide 

Fork Stop Kit for Wide 

Conversion Kits 

Fits our custom plate style triple tree and 

front end sets. 

160552 For use with 5 gallon Fat Bob 

tanks 

Stem Nut and Lock Washers 

Fits 49-84 4-speed FL models, 84-07 FX- 

Softail, Wideglide and 85-07 Touring 

models 

500602 Stem nut and lock washer kit 

160014 Fork stem lockwasher ONLY (repl. 

OEM 45717-63) pack of 5 

160035 

Replacement Steering Stem 

Parts 

The most frequently lost or damaged 

parts on the forks of most 49-07 Big Twins. 

09625 Bearing Jam nut. Sold each 

09626 Replacement chrome stem nut 

(sold each) 

09627 Stem nut locktab (pack of 10) 

160035 Upper nut 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Disc Hub Spacer Kits for Fork 

Conversion Kits 

These kits may be purchased as 

replacement parts for the spacers included 

in the Custom Chrome fork conversion 

kits or for use on dual disc models that 

the kits don’t cover. For example on a 

90 FXRS Sport Edition with a CC #13032 

conversion kit the hub spacer works with 

the second disc rotor. 

13156 Fits conversion kit (CC #13032) 

for 39 mm Showa forks on models 

from 87-99 (1 7/16"-thick) 


for 35 mm Showa front forks on 

models from 84-87 (1 11/16"- 

thick) 


for 35 mm Showa front forks on 

dual disc models from 77-83 (1 

5/8"-thick) 

36070 

36069 

Colony Stem Nuts for FX, FXR 

and Sportster Models 

Sold each. 

36070 Fits the stock triple clamp on 

FX and FXR models with 35 mm 

forks from 71-87, and 79-87 

Sportster models 

36069 Fits the stock triple clamp on 

Sportster models from 57-78 


Fork Stem Bolt and Cover Kit 

for 54-77 Sportster Models 

Complete kit includes sleeve, stem 

bolt, dust shield, spacer, rubber plug 

and chrome cover. Fits XL models 54-77 

without steering dampener. 

500597 Complete kit 

Chrome Dust Shield Set 

Upper and lower set for all FL, FXWG, 

Softail and FLT/FLHT models from 49-17 

Includes the original style lower cover and 

77-88 upper shield. Set of two. 

25279 Replaces OEMs 43865-48A, 

48361-80 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Front End Installation Kit 

Installation kit for stock or CC front ends. 

Include: upper and lower dust shields, top 

nut, locktab and acorn crown nut. Note: 

Not for FLST models. 

161011 Parts kit (complete less bearings) 

Chrome Acorn Stem Nut 

Functional and good-looking part accents 

most front forks. 

09652 Fits most FL, FXWG, FX Softail 

and Dyna Wide Glide models. (1" 

x 24 thread) 

500590 Fits early XL, 45" and many custom 

applications (7/8"-24 thread) 

15240 




921724 

990122 

Steering Bearing Kit Including 

Seals and Bearings with Races 

Unit: Kit , Qty.: 1 

Kits contain the upper and lower taper 

bearing assemblies along with special 

design seals to prevent water and dirt 

contamination. 

PART# 

FITMENT 

921724 14-23 Touring, 14-23 Trike 

990122 82-20 Sportster, 60-65 Panhead, 

66-84 FL Shovel, 71-84 FX Shovel, 

85-94 FX Model, 91-17 Dyna, 84- 

23 Softail, 85-13 Touring, 09-13 

Trike, 21-23 Pan America, 21-23 

Sportster RH 

990121 15-20 Indian Bagger, 15-20 

Indian Cruiser, 15-20 Indian 

Touring, 15-20 Indian Scout, 09- 

17 Victory Cruiser, 09-17 Victory 

Touring, 09, 15-17 Victory 

Bagger 

990123 Hammer 05-08, Jackpot 06-07, 

Kingpin 04, Kingpin 08, Vegas 

03-05, Vegas 8-Ball 

Steering Bolt Collar by Joker 

Machine 

Replace that ugly stock screw with this 

sharp looking kit. Comes with screw and 

collar. For all XL models. 

684979 Black trim collar 

684980 Chrome trim collar 

Steering Stem Bolts 

Replacements for all Sportster, FX and 

FXR models from 88-05 and Softail models 

from 86-17. Sold each. 

84598 Fits FL Softail models from 86-17 

(repl. OEM 4453) 

84599 Fits 88-09 Sportster, 88-94 

FXR, 91-05 Dyna, except 93-05 

FXDWG(repl. OEM 4460) 

Chrome Fork Stem Nuts 

Fits all FL, FXWG, FXST and Dyna Wide 

Glide models from 49-99. 

160017 Upper fork stem nut with dust 

shield. (repl. OEM 48330-48A) 

Chrome Fork Stem Nut Covers 

These covers are held in place on the stock 

stem nuts by a set screw, and fit most 39 

mm and 41 mm forks from 80-03. 

13009 Fits 39 mm forks on FXR models 

from 87-00 as well as Sportster 

models from 88-03 (repl. OEM 

48329-90) 

160110 Fits FXWG and FXST models from 

80-99 (repl. OEM 45670-80) 

Triple Tree Nut Cover Sets 

Three-piece kit includes: chrome covers for 

fork tube caps and triple tree stem nut. 

Attach with set screws. 

160111 Fit Softail and FXWG models 

from 80-99 

Chrome Fork Tube Plugs and 

Caps 

Upper Fork Tube Plugs 

Fits all Showa Wide Glide forks from late 

77-13 (except 84-13 FLT, FLHT and FLHS 

models or FL model adjustable forks). Sold 

in pairs. 

15240 Upper fork tube plugs for all 

Showa Wide Glide forks from 

late 77-17 (except 84-17 Touring 

models or FL model adjustable 

forks) replaces OEM 45838-77 

(sold in pairs) 

Slider Tube Caps 

Fits all Softail, Dyna Wide Glide and 

4-speed FXWG models from 80-13 (except 

Springer Softail models). Sold in pairs. 

15241 Chrome fork tube caps for all 

Softail, Dyna Wide Glide and 

4-speed FXWG models from 

80-17 (except Springer Softail 

models) replaces OEM 45419-80 

(sold in pairs) 



Chrome Fork Tube Caps 

15232 Chrome fork tube caps for 

Sportster, FX and FXR models 

with fine threads from 73-86 

(replaces OEM 45993-73) sold in 

pairs 

15233 Chrome fork tube caps for FL 

models from 49-E77 (replaces 

OEM 45754-60) sold in pairs 

72074 Chrome fork tube caps with 

chrome washers for FXWG and 

Softail models, and other models 

with Wide Glide forks from late 

77-05 (replaces OEMs 45419-80, 

5710) sold each 

72075 Chrome fork tube caps with 

O-rings for 88-20 Sportster, 87-94 

FXR, 91-05 Dyna models, with 

39mm fork tubes (replaces OEM 

45996-87) sold each

APPAREL 

SEATS & 

TOURING 

Chrome Fork Tube Cap for 

Sportster Models 

Chrome fork tube caps with O-rings for 

88-20 Sportster, 87-94 FXR, 91-05 

Dyna models, with 39mm fork 

tubes (replaces OEM 45996-87) 

sold each. 

690225 690226 

922735 

FOOT 

CONTROLS 

HAND 

CONTROLS 

35162 Replaces OEM 45996-87 

LIGHTING 

690227 690228 

ELECTRICAL 

Upper Fork Tube Plugs 

For 49-E77 FL forks (repl. OEM 45776-49). 

922737 

EXHAUST 

26485 Upper fork tube plugs for 49-E77 

FL forks (replaces OEM 45776-49) 

sold in pairs 

INTAKE 

72073 Button head fork drain screw kit 

with brass washers (repl. OEM‘s 

#45790-80, #45996-73) 

Fork Preload Adjusters by 

Burly 

High performance suspension preload 

adjusters for 88-Up Sportsters and 91- 

Up Dyna models. Easily tune your front 

suspension to suit your weight and riding 

style. Simple installation and 20mm of 

adjustment range via hex key. Black or 

machined aluminum finish. 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

Joker Machine Fork Tube Plugs 

Joker Machine fork tube plugs for 

Sportster models with 39 mm fork tubes. 

653790 Black 39 mm ø for 88-20 

Sportster, except 08-10 XR1200, 

10-13 XR1200X, 16-20 XL1200X, 

16-20 XL1200CX, 18 XL1200X 

ANX, 19-20 XL1200XS, 91-05 

Dyna, except 93-03 FXDWG, 

99-03 FXDX, 01-03 FXDXT, 02 

FXDWGSE3, 04-05 FXDWGI, 04-05 

FXDXI, 87-94 FX Model, except 

89-92 FXRT, 90-93 FXRS_CON, 

90-93 FXRSSP 

88-20 Sportster, except 08-10 XR1200, 

10-13 XR1200X, 16-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 19-20 

XL1200XS, 91-05 Dyna, except 93-03 

FXDWG, 99-03 FXDX, 01-03 FXDXT, 

02 FXDWGSE3, 04-05 FXDWGI, 04-05 

FXDXI, 87-94 FX Model, except 89-92 

FXRT, 90-93 FXRS_CON, 90-93 FXRSSP 

690225 Fork preload adjusters 39mm 


black 

06-17 Dyna, 18-23 Softail, except 18- 

20 FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 

19 FXFB 114, 19-20 FXDRS 114, 20-23 

FXLRS, 21-23 FXFBS, 22-23 FXLRST, 16- 

20 XL1200X, 18 XL1200X ANX, 19-20 

XL1200XS 


Upper Fork Stem Cover for 

Sportster S 

• Design cover for upper fork stem 

• CNC machined 

• Aluminum 

• Black matt powdercoated 

• Sold in pairs 

• Easy installation 

• Including installation hardware 

• Made in Germany 

Fitment: 21-23 Sportster S RH1250S 

, Color: Satin Black Powder Coated , 

Material: Aluminium , Unit: Pair , Qty.: 

1 

PART# 

DESCRIPTION 

922735 Smooth, without Ricks Logo 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 


black 

922736 Small, without Ricks Logo 

922737 Premium, with Ricks Logo 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


15.15

Premium Nut Covers for Nightster 

• CNC made 

• Aluminum 

• Black anodized 

• Laser engraving 

• Easy mounting 

• Including mounting material 


Fitment: 22-23 Nightster RH975, 23 Nightster Special 

RH975S , Color: Black , Unit: Pair , Qty.: 1 

PART# 

DESCRIPTION 

921927 With Ricks Logo and fits for Hex Head Screws with Size 


921929 With Ricks Logo and fits for Hex Head Screws with Size 

22 

Premium Cover Kit for Nightster 

• CNC made 

• Black 

• Laser engraving 


• Inclusive mounting material 


• Complete kit, including: 

• 5 x nut cover SW 15 

• 1 x nut cover SW 22 

• Front and rear wheel axle cover 

• Swingarm axle cover 

• Cooling cover 

• Wheel bushing 

Part#: 921923 , Fitment: 22-23 Nightster RH975, 23 

Nightster Special RH975S , Color: Satin Black Powder 

Coated , Description: With Ricks Logo , Unit: Kit , Qty.: 1 


Smooth Cover Kit for Sportster S 

• Kit includes: 

• Fork Stem Cover 

• Front Axle Cover 

• Rear Axle Cover 

• Swing Arm Axle Cover 

Part#: 922726 , Fitment: 21-23 Sportster S RH1250S , Color: 

Satin Black Powder Coated , Unit: Kit , Qty.: 1 

Smooth Cover Kit for Nightster 

• CNC made 

• Black 




• Complete kit, including: 

• 5 x nut cover SW 15 

• 1 x nut cover SW 22 

• Front and rear wheel axle cover 

• Swingarm axle cover 

• Cooling cover 

• Wheel bushing 


Nightster Special RH975S , Color: Satin Black Powder 

Coated , Description: Without Ricks Logo , Unit: Kit , Qty.: 

1 


APPAREL 

SEATS & 

TOURING 

922733 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Premium Rear Shock Adjustment Knob for 

Sportster S 

• High-end machined Premium Design knob replaces the stock 

plastic adjustment knob 

• Precice settings through optimized adjustment abilities 


• Aluminum 


• Laser engraved 





Satin Black Powder Coated , Description: With Ricks Logo , 

Unit: Each , Qty.: 1 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

Premium Cover Kit for Sportster S 


• Fork Stem Cover 

• Front Axle Cover 

• Rear Axle Cover 

• Swing Arm Axle Cover 

• Rear Shock Adjustment Turning Knob 

• Spacer Front Wheel right side 

• Radiator Cap 




Smooth Nut Covers for Nightster 

• CNC made 

• Aluminum 



• Including mounting material 


Fitment: 22-23 Nightster RH975, 23 Nightster Special 

RH975S , Color: Black , Unit: Pair , Qty.: 1 

PART# 

DESCRIPTION 

921928 Without Ricks Logo and fits for Hex Head Screws with 

Size 15 

922096 Without Ricks Logo and fits for Hex Head Screws with 

Size 22 

Limited Design Nut Covers for Nightster 

• Design covers for nuts with wrench size 15 

• E.g.: fixing left bezel, fixing air filter bezel, front frame 

• CNC manufactured 

• Aluminum 

• Black coated 

• easy mounting 




Nightster Special RH975S , Color: Black , Description: 

Without Ricks Logo and fits for Hex Head Screw with Size 

15 , Unit: Pair , Qty.: 1 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



922734 

Premium Radiator Cap for Sportster S 

• Design cover, serves as high end exchange for stock radiator 

cap 

• CNC machined aluminum 


• Laser engraved 




Part#: 922734 , Fitment: 21-23 Sportster S RH1250S, 22-23 

Nightster RH975, 23 Nightster Special RH975S , Color: 



Smooth Shock Absorber Nut Cover 

Part#: 924683 , Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 

18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 

114 ANX, 18 FLFBS 114 ANV, 18-21 FLHC, 18 FLHCS 114, 18 

FLHCS 114 ANV, 18-20 FXBB, 19-20 FLHC 114, 20-23 FXST, 

21-23 FXBBS, 21-22 FXBRS, 21-23 FLFBS, 21-23 FLHCS, 

23 FLHCSANV, 23 FLFBSANV , Color: Satin Black Powder 

Coated , Unit: Each , Qty.: 1 

Smooth Cover Kit for Softail 


• Smooth Front Axle Cover 

• Smooth Rear Axle Cover 

• Smooth Swing Arm Axle Cover 

• Smooth Nut Cover Shock Absorber 

Color: Satin Black Powder Coated , Material: Aluminium , 


PART# 

FITMENT 

924688 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 

18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 

FLFBS 114 ANV, 21-22 FXBRS, 21-23 FLFBS, 23 FLFBSANV 

924700 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 

ANV, 18-20 FXBB, 19-20 FLHC 114, 20-23 FXST, 21-23 

FXBBS, 21-23 FLHCS, 23 FLHCSANV 

924684 18-20 FXFB, 18, 20 FXFBS 114, 19 FXFB 114, 21-23 FXFBS 

924692 18-20 FXLR, 20-23 FXLRS, 22-23 FXLRST 

924696 18-23 FLSB 

Fork Caps 

• Aluminum 

• Black powder coated matte or gloss, hard chrome plated or 

raw 


Fits 04-20 Sportster, except 16-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 19-20 XL1200XS 

690861 Black matte 

690860 Black gloss61 

Premium Cover Kit for Softail 


• Premium Front Axle Cover 

15• Premium Rear Axle Cover 

• Premium Swing Arm Axle Cover 

• Premium Nut Cover Shock Absorber 

Color: Satin Black Powder Coated , Description: With Ricks 

Logo , Material: Aluminium , Unit: Kit , Qty.: 1 

Chrome Sockethead Pinch Bolt Kit for Big 

Twins 

Fits all FL and Wide Glide triple trees (includes FXST). Includes 

two 7/16-20 x 1 1/4" chrome sockethead bolts and lock washers. 

161000 Fits stock style triple trees 

PART# 

FITMENT 



FLFBS 114 ANV, 21-22 FXBRS, 21-23 FLFBS, 23 FLFBSANV 

924701 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 

ANV, 18-20 FXBB, 19-20 FLHC 114, 20-23 FXST, 21-23 

FXBBS, 21-23 FLHCS, 23 FLHCSANV 

924685 18-20 FXFB, 18, 20 FXFBS 114, 19 FXFB 114, 21-23 FXFBS 

924693 18-20 FXLR, 20-23 FXLRS, 22-23 FXLRST 

924697 18-23 FLSB 


APPAREL 

26538 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Springer Fork Lowering Kit by 

White Bros. 

The quick and easy way to lower front 

forks 1 1/2" for a custom look. Includes 

chrome compression springs, spring 

spacers and bushings. Requires CC #28206 

spring compressor tool for installation. 

28205 Fits FXSTS Springer Softail models 

(except FLSTS models) from 89-09 

Handlebar Clamp Covers 

Clamp covers for FL Softail models from 

86-99, and 4-speed FL models with or 

without the steering damper from 60-84. 

26538 Chrome handlebar clamp cover 

for use without steering damper 

(repl. OEM 58590-60) 


for use with steering damper 

(repl. OEM 58589-60) 

Fork Side Trim for Softail 

Models 

Chrome tin with no accents for all FL 

Softail models from 86-17. 

220059 Sold in pairs (repl. OEM 67819- 

86) 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

Kit does NOT 

include rocker 

BEFORE 

GASKETS 

Colony Springer Rocker 

Rebuild Kit 

Each part is interchangeable with original 

equipment Harley Springer front ends 30- 

48. Material, heat treating and plating are 

equal to or better than stock. 

160130 Rocker rebuild kit. All parts to 

rebuild two rockers on Big Twin 

models from 30-48 

Lower Fork Stem Cover 

Nice version to cover the lower stem 

beneath the lower triple tree. Available in 

three finishes (sold each). 

690874 Raw, for Sportster models 07-20 

690876 Black matte, for Sportster models 

07-20 

AFTER 

Doss Chrome Lower Triple 

Tree Covers 

Chrome-plated stamped steel. These 

covers bolt under their respective lower 

triple trees in minutes to clean-up that 

area on your motorcycle. 

26889 Fits FX Softail and Dyna Wide 

Glide models from 88-17 

Replacement parts for 

Headlamp Housing for FL 

models 

26536 Set of left and right chrome-plated 

housings (repl. OEMs 67847- 

60, 67848-60) 

26535 Chrome outer trim ring with rubber 

seal and four retaining clips 

(repl. OEMs 67712-60A, 67716- 

60A and 67779-60) 

26526 Retaining ring for sealed beam 

(repl. OEM 67765-60) 

26893 Inner headlight mount with two 

adjusting screws for FL models 

from 60-69 (repl. OEM 67702-65) 

26894 Outer headlight bucket for FL 

models from 60-84 (repl. OEM 

67766-60) 

25234 Set of left and right chrome slider 

covers (repl. OEM 45964-49T) 


for use with steering damper 

(repl. OEM 58589-60) 


for use without steering damper 

(repl. OEM 58590-60) 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Smooth Fork Tins for Softails 

This 3-piece late style fork tin kit is available in chrome or black 

finish. No grooves or ball mills just smooth, sleek surfaces. 

642710 Chrome smooth fork tins 00-17 FLST models 

642711 Black smooth fork tins 00-17 FLST models 

26764 

EMD Forktube Covers 

Bombshell for 06-17 Dyna 

607195 EMD Forktube Covers 

Bombshell 49mm raw 

607196 EMD Forktube Covers 

Bombshell 49mm black cut 

651850 

Chrome Fork Tins for FL Softail Models 

These reproductions of the Original Equipment parts are made 

from highly-polished steel that is then given a chrome-plated 

or gloss black finish. Fits all 86-17 FLST, FLSTC, FLSTF and 93- 

17 FLSTN (05-17 FLSTN will not work unless OEM light bar is 

15removed), mounting hardware Included. Available with or 

without fork slider covers. 

Note: Models equipped with accessory front passing lamps may need to drill a hole in rear 

panel to mount the on/off switch. 


26760 Chrome headlight tins 3-piece kit (replaces OEMs 67808- 

86, 67816-86 and 67820-86) 

26764 Chrome tins and slider covers 5-piece kit (replaces OEMs 

67808-86, 67816-86, 67820-86 and 45964-86) 

Black 

651849 Black headlight tins 3-piece kit (repl. OEMs 67808-86, 

67816-86 and 67820-86) 

651850 Black tins and slider covers 5-piece kit (replaces OEMs 

67808-86, 67816-86, 67820-86 and 45964-86) 

Fork Shrouds by Lowbrow Customs 

Clean up the look of your front end with Lowbrow 39 mm Fork 

Shrouds. Fits all 39 mm narrow glide forks, and with the included 

allen hardware it is an E-Z bolt-on installation. Requires front 

fender removal, but that’s ok, your bike looks better without it. 

Shave those lower fork legs while you are at it and now you are 

really looking slick. 

Fits 88-20 Sportster, except 08-10 XR1200, 10-13 XR1200X, 

16-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS, 16-20 

XL1200CX, 91-05 Dyna, except 93-03 FXDWG, 99-03 FXDX, 

01-03 FXDXT, 02 FXDWGSE3, 04-05 FXDWGI, 04-05 FXDXI, 

87-94 FX 

619795 Black electroplated 

619797 Raw steel 


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

Front End Cover 

• Upside down look for your front end 

• Very cool and fat appearance 

• With allen head screws on the upper fork cover cap 

Part#: 918352 , Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 

21-22 FXBRS , Color: Black , Unit: Each , Qty.: 1 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

Upper Fork Cover 

• Billet aluminum upper fork covers 

• Grooved or plain versions available 

Material: Billet Aluminium , Unit: Pair , Qty.: 1 

WHEELS, TIRES 

& BRAKES 

PART# FITMENT COLOR 

Fork Slider Covers 

These quality replacement slider covers come in a show quality 

chrome or gloss black finish and are available in stock or 2” over 

lengths. They fit FL models 49-84, FLT’s 80-13 and FL Softails 86- 

17. Sold in pairs. 

688838 Black fork slider covers, stock length 

25234 Chrome fork slider covers, stock length 

688837 Black fork slider covers, +2” length 

688836 Chrome fork slider covers, +2” length 

For all 17-23 Touring and Trike models 

688753 Black fork slider covers, stock length 

688752 Chrome fork slider covers, stock length 

653075 06-17 Dyna with 49 mm Fork Tubes Aluminium 

Polished 

653076 06-17 Dyna with 49 mm Fork Tubes Bi-Color 

913130 13-14 FXSBSE, 14-17 FXSB Black 

913131 18-19, 23 FXBR, 18-20 FXBRS 114, 18 Black 

FXBRS 114 ANX, 21-22 FXBRS 

912722 18-20 FXBB, 20-23 FXST, 21-23 FXBBS Black 

923626 22-23 Nightster RH975, 23 Nightster 

Special RH975S 

Black 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



607610 

618470 

895487 

895487 

618470 


Softail 

6-Piece Fork Covers with lower Fork Aluminum Covers 

Color: Gloss Black Powder Coated , Position: Front , Material: Aluminium , Unit: Kit , Qty.: 1 

FAMILY FITMENT DESCRIPTION PART# 

Dyna 07-17 Dyna, 49 mm Fork Tubes Plain 913238 

Indian Scout 18-23 Scout Bobber Long Version, Plain, relocated OEM Headlamp Mask 921501 

and Front Turn Signal Position 

Indian Scout 18-23 Scout Bobber Long Version, with Cult-Werk Logo, relocated OEM 921503 

Headlamp Mask and Front Turn Signal Position 

Indian Scout 18-23 Scout Bobber Mid Version, Plain, with OEM Turnsignals and 921541 

relocated OEM Headlamp Mask 

Indian Scout 18-23 Scout Bobber Mid Version, with Cult-Werk Logo, with OEM 

921543 

Turnsignals and relocated OEM Headlamp Mask 

Indian Scout 18-23 Scout Bobber Short Version, Plain, with OEM Headlamp Mask and 921505 

relocated OEM Front Turn Signals 

Indian Scout 18-23 Scout Bobber Short Version, with Cult-Werk Logo, with OEM 921507 

Headlamp Mask and relocated OEM Front Turn 

Signals 

Softail 13-14 FXSBSE, 14-17 FXSB, 49 mm Fork Tubes Plain 895487 

Softail 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 

ANX, 21-22 FXBRS, 49 mm Fork Tubes 

Softail 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 

ANX, 21-22 FXBRS 49 mm Fork Tubes 

Softail 18-20 FXBB, 20-23 FXST, 21-23 FXBBS, 49 mm Fork 

Tubes 

18-20 FXBB, 20-23 FXST, 21-23 FXBBS, 49 mm Fork 

Tubes 

Plain 901888 

With Cult-Werk Logo 913225 

Plain 917186 

With Cult-Werk Logo 917187 

V-Rod 02-06 V-Rod, 49 mm Fork Tubes Plain 607610 

V-Rod 07-08 VRSCD, 07-11 VRSCDX, 08 VRSCDA, 08 

VRSCDXA, 49 mm Fork Tubes, 212 mm length 

between triple trees 

Plain 618470 


APPAREL 

SEATS & 

TOURING 

923887 

FOOT 

CONTROLS 

893784 

895488 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

901906 

EXHAUST 

6-Piece Fork Covers with lower Fork Rubbers 

Color: Gloss Black Powder Coated , Position: Front , Material: Aluminium, Rubber , Unit: Kit , Qty.: 1 


Dyna 07-17 Dyna, 49mm Forks Plain 901906 

Indian Scout 18-23 Scout Bobber Long Version, Plain, relocated OEM Headlamp Mask and Front 921502 

Turn Signal Position 

Indian Scout 18-23 Scout Bobber Long Version, with Cult-Werk Logo, relocated OEM Headlamp 921504 

Mask and Front Turn Signal Position 

Indian Scout 18-23 Scout Bobber Mid Version, Plain, with OEM Turnsignals and relocated OEM 921542 

Headlamp Mask 

Indian Scout 18-23 Scout Bobber Mid Version, with Cult-Werk Logo, with OEM Turnsignals and 921544 

relocated OEM Headlamp Mask 

Indian Scout 18-23 Scout Bobber Short Version, Plain, with OEM Headlamp Mask and relocated 921506 

OEM Front Turn Signals 

Indian Scout 18-23 Scout Bobber Short Version, with Cult-Werk Logo, with OEM Headlamp Mask 921508 

and relocated OEM Front Turn Signals 

Softail 13-14 FXSBSE, 14-17 FXSB, 49mm Forks Plain 895488 

Softail 18-19, 23 FXBR, 18-20 FXBRS 114, 18 With Cult-Werk Logo 901889 

FXBRS 114 ANX, 21-22 FXBRS, 49mm 

Forks 

Softail 18-19 FXBR, 18-20 FXBRS 114, 18 FXBRS Plain 913226 

114 ANX, 21-22 FXBRS, 49mm Forks 

Sportster 04-20 Sportster, except 08-10 XR1200, Plain 893760 

10-13 XR1200X, 10-20 XL1200X, 16-20 

XL1200CX, 18 XL1200X ANX, 19-20 

XL1200XS, 39mm Forks 

Sportster 10-15 XL1200X, 39mm Forks Plain 893745 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Sportster 16-20 XL1200X, 18 XL1200X ANX, 19-20 

XL1200XS, 49mm Forks 

Sportster RH 22-23 Nightster RH975, 23 Nightster 


Sportster RH 22-23 Nightster RH975, 23 Nightster 


Plain 893784 

Long Version, with Cult-Werk Logo, relocated OEM Front Turn 

Signal Position 

Short Version, with Cult-Werk Logo, for OEM Front Turn Signal 

Position 

923887 

923889 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



618468 

Triple Tree Screw Set 

• The black galvanized Cult Werk screws fall to less in black and 

give the black fork the finishing touches . 5 pcs = 1 piece of 

the upper fork bridge piece 4 and the lower bracket. Since 

the screws are not painted or coated, there is no flaking when 

tightened. 

Rear Shock Bolt Cover Kit 

These shock absorber covers from Cult-Werk fit all Indian ® 

Scout Bobber models from 2018 and hide the screws at the top 

and bottom of the rear shock absorbers. The covers are placed 

on the screws and fixed using the setscrews. This results in a 

clean and black look. 

Part#: 921519 , Fitment: 18-23 Scout Bobber, 21-23 Scout 

Bobber Twenty, 23 Scout Bobber Sixty , Color: Black 

Powder Coated , Unit: Pair , Qty.: 1 

PART# FITMENT COLOR FINISH 

618468 

02-11 V-Rod, except 06-07 

VRSCR 

Black Galvanized 

901684 04-15 Sportster, 39 mm fork Black Galvanized 

901685 16-20 Sportster Black Galvanized 

901887 14-17 FXSB, FXSBS, FXSBSE Black Galvanized 

901893 

18-19, 23 FXBR, 18-20 FXBRS 

114, 18 FXBRS 114 ANX, 21- 

22 FXBRS 

Black Galvanized 

890778 

Triple Tree Bolts for V-Rod 

• For all V-Rod models 12-17 

• Set of 5 

• Black galvanized 

890778 Triple tree bolts 

4-PIECE FORK COVER KIT 

• Including upper fork covers and fork caps 

• Hidden screws 

• Mounting hardware included 

FAMILY FITMENT FITMENT UNIT 4-PIECE 

NOTE 

Sportster 

04-20 Sportster, 

except 08-10 XR1200, 

10-13 XR1200X, 

16-20 XL1200X, 

16-20 XL1200CX, 18 

XL1200X ANX, 19-20 

XL1200XS 

39mm Forks Kit 893768 

Sportster 10-15 XL1200X 39mm Forks Kit 893743 

Sportster 

16-20 XL1200X, 18 

XL1200X ANX, 19-20 

XL1200XS 

49mm Forks Kit 893783 


Black Screw Sets by Cult Werk 

Several sets to complete the ‘All Black‘ look. 

618468 Triple tree screw set (4 piece set) fits all V-Rod & Night 

Rod models 02-11 

618469 Fender screw set (4 piece set) fits all V-Rod & Night Rod 

models 07-11 

618474 Fender screw set (4 piece set), flat screw head fits all 

V-Rod & Night Rod models 12-17 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Upper Fork Cover 

• Made of high quality aluminum 

• Black powder-coated 

923886 923886 

Color: Gloss Black Powder Coated , Position: Upper , Material: Aluminium , Unit: Pair , Qty.: 1 


Dyna 07-17 Dyna, 49mm Forks 901905 

Indian Scout 

Indian Scout 

Indian Scout 

18-23 Scout Bobber, 21-23 Scout Bobber Twenty, 23 Scout 

Bobber Sixty 


Bobber Sixty 


Bobber Sixty 

Long Version, use without OEM Headlamp 

Mask and relocated Turn Signals 

Middle Version, use without OEM 

Headlamp Mask and OEM Turn Signals 

Short Version, use with OEM Headlamp 

Mask and relocated OEM Turn Signals 

921498 


921499 

Softail 13-14 FXSBSE, 14-17 FXSB, 49mm Forks 895490 

Softail 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 

901890 

FXBRS, 49mm Forks 

Softail 18-20 FXBB, 20-23 FXST, 21-23 FXBBS, 49mm Forks 917972 

Sportster 04-20 Sportster, except 08-10 XR1200, 10-13 XR1200X, 10-20 

893761 

XL1200X, 16-20 XL1200CX, 18 XL1200X ANX, 19-20 XL1200XS, 

39mm Forks 

Sportster 10-15 XL1200X, 39mm Forks 893737 

Sportster 16-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS, 49mm 

893780 

Forks 

Sportster RH 22-23 Nightster RH975, 23 Nightster Special RH975S Long Version, relocated OEM Front Turn 923885 

Signal Position 

Sportster RH 22-23 Nightster RH975, 23 Nightster Special RH975S Short Version, for OEM Front Turn Signal 923886 

Position 

V-Rod 02-06 V-Rod, 49mm Forks 901661 

V-Rod 

07-08 VRSCD, 07-11 VRSCDX, 08 VRSCDA, 08 VRSCDXA, 49mm 

Forks 

924234 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

901892 

WHEELS, TIRES 

& BRAKES 

FRAMES 

End Cap Fork Cover 

• Flat design for use with drag bar handlebars 

• The caps are securely fastened with a hidden screw 

Color: Black Powder Coated , Material: Aluminium , Unit: Pair , Qty.: 1 

• Machined from aluminum 

• Black powder coated 

FAMILY FITMENT FORK CAP 

PLAIN 

Indian Scout 18-23 Scout Bobber, 21-23 Scout Bobber Twenty, 23 Scout Bobber Sixty 921496 921497 

Softail 13-14 FXSBSE, 14-17 FXSB 895489 

Softail 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS 913224 901892 

Softail 18-20 FXBB, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 917184 917185 

ANV, 20-23 FXST, 21-23 FXBBS, 21-23 FLFBS, 23 FLFBSANV 

Sportster 16-20 XL1200X, 19-20 XL1200XS, 18 XL1200X ANX 893781 

Sportster 88-15 Sportster, 16-20 XL883L, 16-20 XL883N, except 08-10 XR1200, 10-13 642878 

XR1200X, Fits only 39mm Fork 

Sportster RH 22-23 Nightster RH975, 23 Nightster Special RH975S 923883 


FORK CAP WITH 

CULT-WERK LOGO 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


901665 607609 

Lower Fork Cover 

Color: Gloss Black Powder Coated , Position: Lower , Unit: Pair , Qty.: 1 

FAMILY FITMENT PART# 


Indian Scout 18-23 Scout Bobber, 21-23 Scout Bobber Twenty, 23 Scout Bobber Sixty 921500 

Softail 13-14 FXSBSE, 14-17 FXSB, 49mm Forks 901886 

Softail 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS, 49mm Forks 901891 

Softail 19-20 FXDRS 114, 18-20 FXFB, 19 FXFB 114, 20-23 FXLRS, 18, 20 FXFBS 114, 21-23 FXFBS, 22-23 FXLRST, Fork 914889 

reflectors needs to be removed, Upside Down Fork 

Sportster RH 21-23 Sportster S RH1250S 921649 

V-Rod 02-06 V-Rod, 49mm Forks 901665 

V-Rod 07-08 VRSCD, 07-11 VRSCDX, 08 VRSCDA, 08 VRSCDXA, 49mm Forks 901666 

V-Rod 12-17 V-Rod, Up Side Down 607609 

LOWER FORK COVER 

• No disassembly required. Simple bolt-on installation using hand tools. 

PART# FITMENT COLOR FINISH 

777147 14-23 Touring, 14-23 Trike Black Gloss 

777148 14-23 Touring, 14-23 Trike Chrome 


Upper Fork Cover for Nightster 

• Covers the stock fork tubes between the top and lower triple tree 

• Made of high quality aluminium 


• Black powdercoated 

• Incl. installation hardware 

Part#: 921931 , Fitment: 22-23 Nightster RH975, 23 Nightster Special RH975S , Color: Black 

Powder Coated , Unit: Pair , Qty.: 1 


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

4-Piece Fork Cover Kit 

• 4-piece set, includes: 

• 2 x fork plug cover 

• 2 x upper fork tube cover 

Color: Black Powder Coated , Material: Aluminium , Unit: 

Kit , Qty.: 1 

PART# 

FITMENT 

925295 18-20 FXBB, 20-23 FXST, 21-23 FXBBS 


21-22 FXBRS 

925299 13-14 FXSBSE, 14-17 FXSB 

6-Piece Fork Cover Kit 

• 6-piece set, includes: 

• 2 x fork plug cover 

• 2 x upper fork tube cover 

• 2 x lower fork tube cover 

• Mounting hardware 

Color: Black Powder Coated , Material: Aluminium , Unit: 

Kit , Qty.: 1 

PART# FITMENT FITMENT NOTE 

925294 18-20 FXBB, 20-23 FXST, 

21-23 FXBBS 

925296 18-19, 23 FXBR, 18-20 

FXBRS 114, 18 FXBRS 114 

ANX, 21-22 FXBRS 

925298 13-14 FXSBSE, 14-17 FXSB 

925300 02-06 VRSCA, 04-05 VRSCB, 

06-08 VRSCD, 06 VRSCR, 

07-08, 10 VRSCAW, 07-11 

VRSCDX, 08 VRSCAWA, 08 

VRSCDA, 08 VRSCDXA 

Does not fit Muscle and 

Street-Rod models 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Straight 

Curved 

Straight 

Curved 

FORK COVER STRAIGHT 

04-20 SPORTSTER, EXCEPT 10-20 

XL1200X, 19-20 XL1200XS, 16-20 

XL1200CX, 10-13 XR1200X, 08-10 

XR1200, 18 XL1200X ANX 

XL1200X 

10-15 

XL1200X 

16-20 

DYNA 

06-17 

18 FXBRS 114 ANX, 

18-19, 23 FXBR, 18- 

20 FXBRS 114, 21-22 

FXBRS 

39 MM FORK 39 MM FORK 49 MM FORK 49 MM FORK 49 MM FORK 

Wrinkle Black 

Matte 

894378 

Black Matte 690840 690843 894391 690846 894379 

Black Gloss 690839 690842 894393 690845 894381 

Chrome 894373 894392 894380 

FORK COVER CURVED 

Wrinkle Black 

Matte 

894370 

Black Matte 690852 894387 894383 

Black Gloss 894389 

Chrome 894371 894388 894363 894384 

Raw 690850 690856 

*Note: Does not fit in combination with a front fender 

Triple Tree Upper and Lower Covers 

• Aluminum 

• Sold in pairs8 


Athene Upper Fork Covers with integrated Turn Signals 

• E-approved turn signals 

• Pair incl. O-rings 

• Black gloss and black satin 

• Aluminum 

Certification: E-Approved , Material: Aluminium , Unit: Pair , Qty.: 1 


FAMILY FITMENT GLOSS BLACK POWDER 

COATED 

Dyna 06-17 Dyna, except 07-10, 14-17 FXDL, 06 FXDLI, 12, 14-16 FLD, 16- 

17 FXDLS, 13 FLD103, Fits 49 mm Fork Tubes 

Sportster 04-20 Sportster, except 10-20 XL1200X, 19-20 XL1200XS, Fits 39 mm 

Fork Tubes 

918053 918054 

918055 918056 

Sportster 10-15 XL1200X, Fits 39 mm Fork Tubes 918057 918058 

Sportster 16-20 XL1200X, 19-20 XL1200XS, Fits 49 mm Fork Tubes 918059 918060 

SATIN BLACK 

POWDER COATED

APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

654001 654000 

Arlen Ness ‘Deep Cut’ Fork Boots 

The new ‘Deep Cut’ fork boots will radically change the look of your front end. They 

are machined from forged 6061-T6 billet aluminum and designed to replace your OEM 

fork boot covers. Available in either a chrome-plated or black anodized finish. 

654000 Chrome, for all 86-13 FLH/FLT 

654001 Black, for all 86-13 FLH/FLT 

654162 Chrome for all 14-23 Touring and Trike models 

654163 Black, for all 14-23 Touring and Trike models 

550017 Chrome, 86- FLST/N/F (not 07 models) 

Arlen Ness 10-Gauge Fork 

Boots 

• Each Fork Boot is machined from forged 

6061-T6 billet aluminum 

• Replaces OEM lower fork covers on 

Touring and Softail models 

• 49 mm fork boots are now available for 

14-23 Touring models 


Fits FLHT 86-13, FLHX 06-13 

895347 Black 

895348 Chrome 

Fits 14-23 Touring, 14-23 Trike (+2“) 


Fits FLHT 86-13, FLHX 06-13 (+2“) 

895351 Black 


LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

919473/-75 919474/-76 

DRIVELINE 

Fat Tire Billet Fork Boots 

• Smooth fork boots feature a sculpted CNC machined billet design with specially 

notched inside surfaces to allow the use of 18” x 5.5” fat front wheels on factory 

front ends 

• When paired with Arlen Ness fat front fender designs, 18” x 5.5” fat front wheels can 

be installed without any fabrication. True direct bolt-on design 

• Designed to work with Arlen Ness and other aftermarket fat front fender designs 

• CNC machined from billet aluminum 

• 14-up applications include a set of fork dust seals 

• Black anodize or chrome finish 

Unit: Pair , Qty.: 1 

PART# FITMENT COLOR 

919473 14-23 Touring Black, Anodized 

919474 14-23 Touring Chrome 

919475 93-13 Touring Black, Anodized 

919476 93-13 Touring Chrome 

Ness Retro Fork Boots 

• Classic retro styling for your 86-12 FLHT/ 

FLTR and FL Softail models 

• Replaces the OEM lower fork leg covers 

• Reminiscent of those early ‘Gator’ 

rubber fork boots 

• Machined from 6061-T6 billet aluminum 

• Outstanding quality and finish offered 

in black anodized w/ diamond cut edges 

Black Anodized with Diamond Cut 

Edges 

631089 Fits 86-13 FLT, FLHR, FLST & 90-06 

FLSTF models 

631090 Fits 86-13 FLHT & 06-13 FLHX 

models 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Arlen Ness Complete Lowering Kits 

The kits will give you just about everything you need to lower 

the front and rear of most late model Big Twins. The specially 

designed fork dampers lower the front end without having to 

replace the factory springs. Each kit includes specially designed 

fork dampers, adjustable rear lowering kit, and a 1” shorter 

kickstand (fork oil not included) 

654003 Fits all 00-06 Softail models (except Springer & Deuce 

models) 

Arlen Ness Front Lowering Kits 

This Arlen Ness design simplifies lowering the front of your 

bike. These specially designed fork dampers are shortened and 

drilled in a strategic position to maintain a factory ride quality 

with a lowered stance. Each kit comes with 2 complete damper 

assemblies and utilizes the OEM springs. 

654006 Fits all 00-17 FXST/FLST Softail models with 41mm forks 

(lowers FXST 2.5” & FLST 2”) and 97-13 Touring models 

with 41mm forks (except 02-05 models with cartridge 

forks) lowers frontend 1.5” 

631505 654173 631500 895354 895353 


631501 654173 654170 

Arlen Ness ‘Hot Legs’ Fork 

Sliders for Touring Models 

‘Hot Legs’ are the latest from Arlen and 

Cory Ness, these fork legs will transform 

your bulky stock forks into a sleek stream 

lined custom looking front end. Available 

in two designs ‘Deep Cuts’ and ‘Smooth’ 

and feature a tapered design and hidden 

axle. Choose from either a chrome plated 

or black anodized finish. 

Fits all 14-23 Touring models with 

dual disc 

654169 Smooth Hot Legs, Chrome 

654172 Deep Cut Hot Legs, Black 

654168 Deep Cut Hot Legs, Chrome 

654173 Smooth Hot Legs, Black 

895353 10-Gauge Hot Legs, Chrome 

895354 10-Gauge Hot Legs, Black 

Fits all 08-13 Touring models with 

dual disc 

631500 Smooth Hot Legs, Chrome 

631501 Smooth Hot Legs, Black 

631504 Deep Cut Hot Legs, Chrome 

631505 Deep Cut Hot Legs, Black 


APPAREL 

SEATS & 

TOURING 

26437 

26753 

FOOT 

CONTROLS 

25234 

25237 

25238 

HAND 

CONTROLS 

Groove Cut Fork Cover 

Lend your fork in just a few seconds and with simple steps the 

desired high quality groove cut look. These fork covers are made 

of aluminum with CNC mills and simply replace the original 

relfectors. 

Part#: 917215 , Fitment: 93-94 FX Model, 93-20 Sportster, 

93-17 Dyna, 93-23 Softail, 93-23 Touring, 09-23 Trike , 

Color: Black, Anodized , Material: Billet Aluminium , Unit: 

Pair , Qty.: 1 

Stainless Steel and Chrome Antique Headlamp 

Parts 


Original-style cover with 3 1/2" center-to-center riser spacing for 

use on late model triple trees. 

26408 Stainless steel 


Chrome Slider Covers 

Beautifully chromed slider covers, available in standard or 

oversize lengths. Sold in pairs. Fit all 4- and 5-speed ‘Touring’ 

models from 49-88. 

25234 Set of left and right chrome slider covers (repl. OEM 

45964-49T) 

25237 2" over stock length 

25238 4" over stock length 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

Phatour 180 Front Wide Tire Dual Calipers 

Lower Legs Kit 

The PM Phatour 180 Front Wide Tire Kit for 49 mm fork legs 

is artfully sculpted from heat treated 6061 billet aluminum. It 

features a machined PM iconic logo with a triple pin-stripe detail 

that extends the length of the forks. The hidden axle design 

gives it a clean unique look and a set of PM slider covers rounds 

out the package. Kit contains axle, axle covers, slider covers, 

lower fork legs with caliper and fender mounts to work with a 

5.5” wide wheel. Caliper mounts will accommodate PM calipers 

or stock H-D calipers for single or dual disc applications. 

• Bold Phatour 180 wide front tire styling 

• Hidden axle design 

• Triple pinstripe detail 

• 49mm fork lowers and slider cover for 5.5” wide front wheel 

• Single and dual disc applications 

• Chrome hardware included 

• Contrast Cut 

Part#: 918160 , Fitment: 14-23 Touring, 14-23 Trike , 

Fitment Note: Dual PM and stock caliper mount , Color: 

Contrast Cut , Operation Type: Dual Disc , Material: 

Aluminium , Unit: Pair , Qty.: 1 


Custom Chrome Complete Fork Tube 

Assemblies 

Come completely assembled, ready-to-install. Ideal for 

restoration or replacing damaged Original Equipment parts. 

Assemblies include hard chrome fork tube, springs, cap, and all 

internal components including the damper rod. Sold each. 

Fit FX Softail, Dyna Wide Glide and 4-Speed FXWG Models 

from 84-99 

09291 Stock length with Approval 

08518 +2" over stock length with Approval 




08522 +10" over stock length 

Fit 4-Speed FXWG Models 80-83 

09636 -4" under stock length with Approval 

09650 -2" under stock length with Approval 


Fit all FL Softail Models 86-99 


Fit 4-Speed and 5-Speed Touring Models 77-83 



09635 4" over stock length with Approval 

Note: Careful evaluation of the fender-to-frame clearance is imperative when installing fork 

tubes that are shorter than the Original Equipment units they are replacing. 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


500583 

160037 

160042 

12920 

12921 

25454 

26103 

26104 

25910 

09285 

09632 

25228 




72074 

72075 

09638 


26485 

09639 

09634 

25914 

500584 

09287 

09288 


25227 

25225 

25913 

500582 

500583 


160041 

160037 

160042 

09608 

09609 

09610 


APPAREL 

Front Fork Parts for Big Twins 

Listed below in CC part number order. 

09285 Fork spring for FX Softail and 4-speed FXWG models 

(replaces OEM 46048-84) sold in pairs 

09287 Damper tube assembly for FX Softail, Dyna Wide Glide 

and 4-speed FXWG models from 84-99 (replaces OEM 

45418-84) 

09288 Damper tube assembly for FL Softail models 86-99 

(replaces OEM 45932-86) sold each 

09629 Dampener retaining ring FL models from 49-E77 (replaces 

OEM 46172-48) pack of 10 

09634 Damper rebound spring (repl. OEM 45855-77) sold each 

09638 Chrome washer, fork cap spacing. Fits FXWG, FXST and 

FXDWG models from 80-99 (replaces OEM 5710) pack of 

10 

09639 Fork tube plug oil seal (replaces OEM 45733-48) pack of 

10 

12920 Fork boots for 4-speed FL models from 49-E77 (sold in 

pairs) 

12921 Fork boots for Softail 84-17, FXDWG 84-05 and 4-speed 

FXWG models from 80-83 (except Heritage Softail & Fat 

Boy models) sold in pairs 

15232 Chrome fork tube caps for Sportster, FX and FXR models 

with fine threads from 73-86 (replaces OEM 45993-73) 

sold in pairs 

15233 Chrome fork tube caps for FL models from 49-E77 


15240 Upper fork tube plugs for all Showa Wide Glide forks 

from late 77-17 (except 84-17 Touring models or FL 

model adjustable forks) replaces OEM 45838-77 (sold in 

pairs) 

15241 Chrome fork tube caps for all Softail, Dyna Wide Glide 

and 4-speed FXWG models from 80-17 (except Springer 

Softail models) replaces OEM 45419-80 (sold in pairs) 

25225 Damper tube assembly fits FXWG models from 80-83 


25227 Damper tube assembly fits 4-speed FL models from late 

77-84 (replaces OEM 45831-77) sold each 

25228 Lower bushing, dampener tube. Fits FL, FXWG, FXST and 

FXDWG models late 77-99 (replaces OEM 45834-77) sold 

each 

25454 Fork boots for FX and Sportster models from 77-15 


25910 Bushing set, brake caliper. Fits all dual disc models 

77-83 (replaces OEMs 46018-77, 46019-77) sold in pairs 

(requires 1 pair per caliper) 

25913 Bushing, brake caliper (long). Fits FL models from 72-84 


25914 Bushing, brake caliper (short). Fits FL models from 72-84 


26104 Fork boots for 35 mm Showa forks from 75-87 (replaces 

OEM 45404-75T) sold in pairs 

26485 Upper fork tube plugs for 49-E77 FL forks (replaces OEM 

45776-49) sold in pairs 

72074 Chrome fork tube caps with chrome washers for FXWG 

and Softail models, and other models with Wide Glide 

forks from late 77-17 (replaces OEMs 45419-80, 5710) 

sold each 

72075 Chrome fork tube caps with O-rings for 88-20 Sportster, 

87-94 FXR, 91-05 Dyna models, with 39mm fork tubes 


160037 Axle pinch cap, aluminum. Fits all Big Twins with 41 mm 

front forks from 49-99 (replaces OEM 45832-77) sold 

each 

160042 Drain screw and washer kit for FL models late 77-84, 

FXWG, FLT and Softail models 80-99 (replaces OEM 

45858-77) pack of 5 

500582 Stud and nut kit for FL models from 49-E77 (replaces 

OEMs 45840-48, 7725) sold in pairs 

500583 Stud and nut kit for FL models from late 77-84, FXWG 

models from 80-86, Softail models from 84-99 and 

FXDWG models from 93-99 (replaces OEMs 45998-77, 

7748W) sold in pairs 

500584 Dampener tube screw with washer for most models 

from 75-23 (replaces OEM 45405-75A) pack of 5 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

Polished Fork Sliders 

Replacement fork legs for 49-E77 FL models, made of polished aluminum and clear lacquer coated. 

Upper and lower bushings are installed and reamed to fit. Fork seals have been updated to the 

late-style double-lipped seal and the leak-prone drain plugs have been totally eliminated. These 

fork legs are reproductions of the Original Equipment parts and require the use of 49-E77 fork 

dampers. 

09600 Left drum brake fork leg for 49-68 FL models (repl. OEM 45805-50) 

09601 Fork leg with pinch cap for 49-E68 FL models (repl. OEM 45800-50A) 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



651852 

160057 

Chrome Fork Boot 

Caps 

Fit over the stock boots. Sold 

in pairs. 

651851 


49 mm Rubber Fork 

Boots 

• High quality rubber 

• Protects against damage 

and dirt 

• Available in 7“ or 9“ long 

• For 49 mm fork tubes 

Fitment: 06-17 Dyna, except 

12, 14-16 FLD, 13 FLD103, 08 

FXCW, 08-11 FXCWC, 13-14 

FXSBSE, 14-17 FXSB, 18-19, 

23 FXBR, 18-20 FXBRS 114, 

18 FXBRS 114 ANX, 18-20 

FXLR, 18-20 FXBB, 20-23 

FXST, 21-22 FXBRS, 21-23 

FXBBS, 16-20 XL1200X, 

18 XL1200X ANX, 19-20 

XL1200XS , Color: Black , 

Unit: Pair , Qty.: 1 

PART# 

DESCRIPTION 

919667 Length 9“ 

919666 Length 7“ 

Fork Boot Covers 

These covers fit easily over 

the rubber dust boot without 

disassembling the front end. 

Each 2-piece cover is held 

together with 2 interlocking 

springs. Available in either a 

chrome-plated or gloss black 

finish. Fits all 84-15 FXST, 91-05 

FXDWG, 80-86 FXWG. 

651852 Black, fork boot covers 

160067 Replacement springs 

for CC #160063 (pack 

of 10) 

Fit Sportster, FX and FXR 

models with 35 mm Showa 

forks from 75-87 

28073 Replaces OEM 45350- 

84T 

Fit 4-speed FL models with 41 

mm forks from 49-E77 

28080 Sold in pairs 

Fits FXWG models from 80-86 

and Softail models from 84-15 

except FL Softail and Springer 

Softail models 

160059 Sold in pairs 

Fork Boots 

These are replacement items 

for the stock fork boots. Sold 

in pairs. 

25454 Fork boots for FX 

and Sportster models 

from 77-15 (replaces 

OEM 46001-71) sold 

in pairs 

12920 Fork boots for 

4-speed FL models 

from 49-E77 (sold in 

pairs) 

12921 Fork boots for Softail 

84-15, FXDWG 91-05 

and 4-speed FXWG 

models from 80-86 

(except Heritage 

Softail & Fat Boy 

models) sold in pairs 

26104 Fork boots for 35 mm 

Showa forks from 

75-87 (replaces OEM 

45404-75T) sold in 

pairs 

Fork Boots with Dust 

Shields 

Here’s just what is needed to 

perk up a tired set of forks. 

Supple rubber fork boots with 

chrome-plated or gloss black 

dust shields help make your 

forks look like new. 

160057 Chrome, fits 88-20 

Sportster, 87-94 FXR, 

91-05 Dyna with 

39mm fork 

651851 Black, fits 88-20 

Sportster, 87-94 FXR, 

91-05 Dyna with 

39mm fork 

Eazy-On Fork Boot 

Covers 

Nothing looks cleaner on an 

old school ride than a set of 

rubber fork boots. But, until 

now, you had to disassemble 

your front end to put them 

on... not something you really 

look forward to doing. Well, 

the people at Kijima have 

listened, and added an Eazyon 

solution to their popular 

39mm & 41mm rubber fork 

boots. Split down the back 

they can be easily slid over the 

forks, aligned, then attached 

together with the interlocking 

system/glue provided. Now, 

a super Retro look, in far less 

time! Sold in Pairs. 

682761 EZ-On Black Fork 

Boot Covers, 39mm. 

Pair 

632806 EZ-On Black Fork 

Boot Covers, 41mm. 

Pair 

Rubber Fork Boots by 

Cult Werk 

Black fork boots for models with 

49mm forks 

893779 Fork boots 

Jammer Rubber 

“Gator" Fork Boots 

Old school “gator” fork boots in 

39mm, 41mm and now, 35mm 

& 49mm as well! Available in 

basic Black, or kick-ass Red… 

that look so sweet with our 

Red grips! The 41mm boots 

measure 9" extended, approx. 

4-1/2" collapsed, 1-58" upper I.D. 

(41mm) and 2-9/16" lower I.D. 

(65mm). The 39mm fork boots 

measure 7" extended, approx. 

3-1/2" collapsed, 1-1/2" upper 

I.D. (39mm) and 2-9/16" lower 

I.D. (65mm). The new 35mm fork 

boots measure 182mm X 35mm 

X 60mm and fit early XL’s and 

many others. The new 49mm- 

Short versions fit FXD Dyna 

Glides thru ’06. The new 49mm- 

Long versions fit FXDWG Dyna 

Wide Glides thru ‘06. A way 

cool look for that retro inspired 

scoot! Note: Must remove fork 

tubes to install. Sold in Pairs. 

150125 Black Fork Boots- 

41mm 

632043 Black Fork Boots- 

39mm 

632044 Red Fork Boots-41mm 

632045 Red Fork Boots-39 mm 

632804 Black Fork Boots- 

35mm 

632800 Black Fork Boots-49 

mm Short. Fit FXD 

Dyna 

632802 Black Fork Boots-49 

mm Long, FXDWG 

Dyna Wide Glide 


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

Monotube Cartridge Kit with Frequency Sensing Technology 

Progressive Suspension has combined their road smoothing Frequency Sensing Technology (FST) damper with a progressive rate 

spring to create a state of the art fork cartridge kit. 

What is F.S.T.? 

Our proprietary patented technology that has the unique ability to dynamically adjust damping as you ride. What this means is 

whether you`re hitting the small or big bumps in the road, the Monotube distributes oil through ports accordingly to soak up the hit 

making for an ultimately comfortable ride. 

• Frequency sensing technology (FST) 

• Features adjustable preload 

• Stock height or lowered 

• Front brake dive resistance 

• Improved front end stability 

• Improved bottoming control 

• Improved cornering 

Fitment Note: 49 mm fork tubes , Unit: Kit , Qty.: 1 

FAMILY FITMENT -1“ TO -2“ LOWERED STANDARD 

Softail 

Touring 

18-23 Softail, except 18-20 FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 

19-20 FXDRS 114, 19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 22-23 

FXLRST, 22 FXRST 

14-16 Touring, except 15-16 FLHTCUL, 15-16 FLHTKL, 49 mm fork 

tubes 

920409 (With External 

Preload Adjuster) 

890808 890780 

Touring 15-16 FLHTCUL, 15-16 FLHTKL, 49 mm fork tubes 890398 

Touring 17-23 Touring, 49 mm fork tubes 916663 916662 

920408 (With External 

Preload Adjuster) 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

49 mm Fork Preload Adjuster Kit 

• Threaded preload adjuster with 20mm 

(0.8”) of adjustment 

• Compatible with standard and 1”-2” 

lower ride heights 

• Improved handling and performance 

• Replaces stock 49mm fork cap 


• Black Anodized finish 

• Preload ½” hex adjustment tool 

included 

• Fork Preload Adjuster installation socket 

included 

Part#: 924378 , Fitment: 18-23 Softail, 13-14 FXSBSE, 14-17 FXSB, except 18-20 

FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 19-20 FXDRS 114, 19 FXFB 114, 20-23 FXLRS, 

21-23 FXFBS, 22-23 FXLRST, 22 FXRST, 18-23 Touring, 06-17 Dyna, except 16-17 

FXDL, 16-17 FXDLS, 12, 14-16 FLD, 13 FLD103 , Color: Black , Unit: Kit , Qty.: 1 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Standard Monotube Cartridge Kit 

Monotube Fork Kits have been developed to eliminate the notorious fork dive on these heavy machines. Fork dive greatly effects 

braking and cornering performance. Handle the roads with confidence backed by High Pressure Gas Charged Monotube technology 

and custom tuned fork springs in stock and lowered versions. 

• Stock Height or Lowered 

• Improved Resistance to Front brake dive 


Fitment Note: For 41mm forks , Qty.: 1 

• Improved Cornering 

• Improved Bottoming Control 

FAMILY FITMENT 1“ 

LOWERED 

Dyna, Softail 00-03, 07 FXST, 00-03, 05, 07 FXSTD, 00-03, 07-09 FXSTB, 01-02, 04, 06 

FXSTBI, 01-02, 04-06 FXSTI, 01-06 FXSTDI, 07-10 FXSTC, except 14-17 FXSB, 

14 FXSBSE, 08 FXCW, 08-11 FXCWC, 00-03 FXDWG, 02 FXDWGSE3, 04-05 

FXDWGI, For 41mm forks 

Softail 00, 03-12, 14-17 FLSTF, 00-03, 07-12, 14-17 FLSTC, 01-06 FLSTFI, 01-06 

FLSTCI, 05, 07-12, 14-17 FLSTN, 06 FLSTI, 05-06 FLSTNI, 06 FLSTFSE2, 05 

FLSTFSE, 11 FLSTSE2, 10-12, 14-17 FLSTFB, 12 FLSTSE3, 10 FLSTSE, 16-17 

FLSTFBS, 14-15 FLSTNSE, 13 FLSTC 103, 13 FLSTFB 103, 13 FLSTN103, 13 

FLSTC 103 ANV, 13 FLSTF 103, For 41mm forks 

-1“ TO -2“ 

LOWERED 

STANDARD 

688966 688964 

688965 688963 

Touring 85-96 Touring, For 41mm forks 693929 693928 

Touring 97-13 Touring, For 41mm forks 693900 680129 

15Standard or -1“-2“ low. 


49 mm External Preload Monotube Cartridge Kit 

True high performance front suspension is finally available for the HD 49mm front ends. Progressive Suspension has gone back to 

the drawing board and created a state of the art Fork Cartridge Kit designed to outperform everything on the market. The new 

asymmetrical design places a preload adjuster over a progressive rate spring in one leg and an aluminum bodied, sealed cartridge 

damper on the other. The result is superior damping and ride control combined with tunable preload and a new benchmark for high 

performance suspension on the 49mm Dyna, Sportster and M8 Softail platforms. Can be - depending the kit - installed in either, 

• Adjustable preload 

• Imporved resistance to front brake dive 



• Improved bottoming control 

• Improved cornering 

FAMILY FITMENT -1“ 

LOWERED 

Dyna 06-17 Dyna, except 06 FXDWGI, 07-08, 10-12, 14-17 FXDWG, 08-12, 14-17 FXDF, 

12, 14-16 FLD, 10 FXDFSE2, 13 FXDWG103, 13 FXDF103, 13 FLD103, 09 FXDFSE 

-1“ TO -2“ 

LOWERED 

STANDARD 

690243 

Dyna 06 FXDWGI, 07-08 FXDWG 690244 

Dyna 10-12, 14-17 FXDWG, 13 FXDWG103 690245 

Softail 18-23 Softail, except 18-20 FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 19-20 FXDRS 114, 

19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 22-23 FXLRST, 22 FXRST, 49 mm fork 

tubes 

Sportster 16-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS, 49 mm fork tubes 895090 

914277 914276

APPAREL 

SEATS & 

TOURING 

Stock Length Fork Spring Kit 

• Spring rates reduce front end „dive“ during braking 

• Provides excellent ride comfort 

• High Quality Chrome Silicon wire 

• Precision-wound 

Position: Front , Unit: Kit , Qty.: 1 

FAMILY 

FITMENT 

Dyna 00-03 FXDX, 01-03 FXDXT, 04-05 FXDXI 680090 

Dyna, FX Model 92 FXD_DAY, 92 FXDC, 91 FXDB, 04-05 

FXDLI, 90-99 FXRS_CON, 99 FXDX, 90- 

93 FXRSSP, 89-92 FXRT, 89 FXRSL, For 

use with 39mm forks. 

Dyna, Softail, 

V-Rod 

28442 

02-11 V-Rod, 06-17 Dyna, 08-11 28809 

FXCWC, 08 FXCW, 13-14 FXSBSE, 14-17 

FXSB 

Indian FTR 19-23 Indian FTR 918208 

Softail 18-20 FXFB, 18, 20 FXFBS 114, 18-23 

FLSB, 19 FXFB 114, 21-23 FXLRS, 21-23 

FXFBS, 22-23 FXLRST, 22 FXRST 

Softail, Touring 18-23 Softail, 14-23 Touring, 14-23 

Trike 

Softail, Touring, 

FL Shovel 

914272 

690265 

80-84 FL Shovel, 86-01, 06-13 Touring, 28441 

02-03 FLHR, 02-05 FLHRCI, 02, 04-05 

FLHRI, 02-03 FLHRSEI, 04-05 FLHRSI, 

84-17 Softail, For use with 41mm forks 

Sportster 04-15 Sportster, For use with 39mm 

forks. 

Sportster 16-20 XL1200X, 18 XL1200X ANX, 19- 

20 XL1200XS 

Sportster, Dyna 95-03 FXD, 04-05 FXDI, 94-02 XLH1200, 

92-03 XLH883, 98-03 XL53C, 02-03 

XL883R, For use with 39mm forks. 

Sportster, Dyna, 

Street XG, FX 

Model 

Sportster, FX 

Model 

Sportster, FX 

Shovel 


895089 

28581 

88-03 Sportster, 15-20 Street, 89-92 690195 

FXRT, 93-03 FXDL, 04-05 FXDLI, For use 

with 39mm forks. 

88-94 FXLR, 89-92 FXRS, 89 FXRSL, 28443 

89-94 FXR, 90-92 FXRS_CON, 90-92 

FXRSSP, 88-93 XLH1200, 88-93 XLH883, 

For use with 39mm forks. 

80-82 FXB Sturgis, 74-84 FXE, 82-84 28440 

FXRS, 82 FXR, 77-82 FXS, 79-81 FXEF, 

83 FXDG, 83-84 FXRT, 83-84 FXSB, 

71-78 FX, 57-59 XL, 58-79 XLCH, 59-85 

XLH, 79-85 XLS, 83 XLX, 87 XLH1100, 

86-87 XLH883, For use with 35mm 

Showa fork models. 

Touring 02 FLHTC, 02, 04-05 FLHTCI, 02-03 

FLHT, 02-05 FLHTCUI, 04 FLHTCSE, 03- 

04 FLHTI, 05 FLHTCSE2, For use with 

41mm forks. 

680078 

Progressive Suspension ‘Drop-In’ Front 

Lowering Kits 

Forget everything you know about lowering motorcycle front 

ends. Progressive Suspension has just completely changed the 

game! Pull up to 2” out of the front end of your bike without 

the hassle of disassembling the forks, pulling the front wheel or 

even changing the fork oil and the whole process can be done 

with basic tools. 

680030 Fits all 88-15 Sportster models (except Sport model) 

680031 Fits 91-92 FXD/B/C, 93-05 FXDL, 94-00 FXDS-Conv, 95-05 

FXD/C, and 99 FXDX models 

680032 Fits 08-11 FXCW /C models and 06-17 FXD/F/B/C/L/WG/35 

(except Fat Bob model) 

680033 Fits all 80-13 Touring models with NON-CARTRIDGE style 

forks and all 84-17 Softails (except FXCW/C, FXSB/S/SE 

models) 

680034 Fits all 02-05 Touring models with CARTRIDGE style forks 

Lowering Fork Spring Kit 

• Comes complete with Fork Springs, spacers, and instructions 

• High quality chrome silicon wire 

• Precision wound 

Description: -1“ to 2“ , Position: Front , Qty.: 1 

FAMILY FITMENT PART# 


Dyna, 84-17 Softail, 85-13 Touring, except 02-03 

Softail, FLHT, 02 FLHTC, 02, 04-05 FLHTCI, 02-05 

Touring, FX FLHTCUI, 02-03 FLTR, 02-05 FLTRI, 03-04 

Shovel FLHTI, 04 FLHTCSE, 05 FLHTCSE2, 78-84 

FL Shovel, 80-85 FXWG, 93-03 FXDWG, 02 

FXDWGSE3, 04-05 FXDWGI, 41mm Showa 

forks, except models with cartridge fork 

Softail 18-21 FLSL, 18, 23 FXBR, 18-20 FXBRS 114, 

18 FXBRS 114 ANX, 18-20 FLDE, 18-20 

FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 

18 FLFBS 114 ANV, 18-21 FLHC, 18 FLHCS 

114, 18 FLHCS 114 ANV, 18-20 FXLR, 18, 20 

FXBB, 19-20 FLHC 114, 20-23 FXST, 21-23 

FXBBS, 21-23 FLHCS, 21-22 FXBRS, 22-23 

FLFBS, 23 FLHCSANV, 23 FLFBSANV 

Sportster, 

Dyna 

28542 

914275 

88-20 Sportster, except 08-10 XR1200, 10-13 28541 

XR1200X, 16-20 XL1200X, 16-20 XL1200CX, 

18 XL1200X ANX, 19-20 XL1200XS, 87-94 FX 

Model, 91-05 Dyna, except 93-03 FXDWG, 

99-03 FXDX, 01-03 FXDXT, 02 FXDWGSE3, 

04-05 FXDWGI, 04-05 FXDXI, 39mm Showa 

forks 

Touring 14-16 Touring, except 15-16 FLHTKL, 15-16 

FLHTCUL, 49mm Forks 

V-Rod 02-11 V-Rod, except 09-11 VRSCF, 49mm 

Forks 

690266 

28810 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Road & Track 

Cartridge Kit 

• Fork springs not included, 

must be ordered separately 

• Various spring rates are 

available for individual rider 

weights, preferences and 

use of the bike 

• Advanced suspension 

technology 

• 25 mm pistons 

• Race proven NIX technology 

• damping system vastly 

improves performance, 

comfort and vehicle control 

• Compression and rebound 

damping are separated 

between the legs 

Fitment Note: OEM springs will not fit Öhlins Cardridge 

systems , Unit: Set , Qty.: 1 

PART# 

FITMENT 

607900 97-13 Touring 

607903 14-16 Touring, except 15-17 FLHTKL, 15-16 FLHTCUL 

NIX30 Street Cartridge Kit 

• Fork springs not included, 

must be ordered separately 

• Various spring rates are 


available for individual rider 

weights, preferences and use 

of the bike 

• Each Öhlins Cartridge Kit 

is designed and tested 

specifically for a vehicle 

model 

• 30 mm piston 

• Traction and compression 

Qty.: 1 

damping housed separately 

in the left and right fork leg 

• It allows a precise function 

and ensures the best driving 

stability 

• All damping and preload 

adjustments are made on the 

top cap 

• The cartridge system is 

designed for installation in 

the standard fork 

PART# FITMENT FITMENT UNIT 

NOTE 

906759 18-20 XG750A Each 

916470 18-20 FXFB, 18, 20 FXFBS 114, 

19 FXFB 114, 20-23 FXLRS, 21-23 

FXFBS, 22-23 FXLRST, 22 FXRST 

Approval 

valid only 

for 18-22 

FXFB 

Pair 

917591 18-23 FLSB Pair 

NIX22 Road & Track Cartridge Kit 

• Fork springs not included, must be ordered separately 

• Various spring rates are available for individual rider weights, 

preferences and use of the bike 

• Each Öhlins Cartridge Kit is designed and tested specifically for 

a vehicle model 

• Traction and compression damping housed separately in the 

left and right fork leg 

• It allows a precise function and ensures the best driving 

stability 

• All damping and preload adjustments are made on the top cap 

• The cartridge system is designed for installation in the 

standard fork 

PART# FITMENT FITMENT NOTE UNIT 

906755 18-23 Softail, except 18-20 

FLFB, 18-20 FLFBS 114, 18 FLFBS 

114 ANX, 18 FLFBS 114 ANV, 

18-20 FXFB, 18, 20 FXFBS 114, 

18-23 FLSB, 19 FXFB 114, 19-20 

FXDRS 114, 20-23 FXLRS, 21- 

23 FLFBS, 21-23 FXFBS, 22-23 

FXLRST, 23 FLFBSANV 

889895 

Approval valid 

only for 18-22 

models 

Each 

906756 18-20 FLFB, 18-20 FLFBS 114, 18 Approval valid Each 

FLFBS 114 ANX, 18 FLFBS 114 only for 18-21 

ANV, 21-23 FLFBS, 23 FLFBSANV Models 

916878 10-12, 14-17 FXDWG, 13 

Pair 

FXDWG103 

917542 16-17 FXDLS, 07-10, 14-17 

Pair 

FXDL, 07-16 FXDB, 16 FXDBC, 

12, 14-16 FLD, 07-15 FXDC, 

06 FXDLI, 06 FXDBI, 06 FXDCI, 

14 FXDBB, 13 FXDC ANV, 13 

FLD103 

917547 14-16 Touring Pair 

917560 17-23 Touring, except 17-22 

FLHR, 17-18 FLHRC, 18-23 

FLHRXS 

Approval valid 

only for 17-20 

models, not 

for models 

equipped with 

21“ wheel 

Pair 

917584 16-17 XL1200X Pair 

Fork Oil by Öhlins 

• For Öhlins Road, Track & Motocross forks 

• Viscosity 19.0 Centistoke at 40° 

889895 1 Liter 

889896 4 Liters 


APPAREL 

SEATS & 

TOURING 

Road & Track Cartridge Fork Springs 

Exchanging the front fork springs is one of the most cost effective way to improve the bike‘s front fork. Together with the 

specifically developed high-quality oil from Öhlins, a considerable improvement in the responsiveness and performance of an 

original fork can be achieved. Öhlins offers a wide range of linear springs to suit each individual type of bike, rider weight and 

personal preferences for installation into the standard front fork. Well chosen material and high-end manufacturing guarantee less 

the 1,5% difference regarding spring rate. 

Material: Steel , Unit: Pair , Qty.: 1 

FIELD OF APPLICATION 10 N/ 

MM 

11 N/ 

MM 

12 N/ 

MM 

13 N/MM 8,5 N/ 

MM 

8 N/ 

MM 

9,5 N/ 

MM 

9 N/MM 

CCE# 607900 (FKC 101) 607901 607902 (-25 mm 

lowering kit) 

CCE# 607903 (FKC 102) 607904 607905 607906 (-25 mm 

lowering kit) 

CCE# 906755 (FKS 221), CCE# 914858 916840 916839 914857 916841 

906756 (FKS 222), CCE# 906759 

(FKS 506), CCE# 916470 (FKS 508) 

CCE# 917560 (FKS 228) 922801 918092 920440,920441 (-25 

mm lowering kit) 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

913850 

AXEO CARTRIDGE KIT 

• Easy installs in few simple steps, 

drop-in cartridge 

• Includes 2 mono-tube, dual 

chambered damper cartridges 

• Damper piston and deflective disc 

shim stack 

• Nitrogen chambers with internal 

floating piston 

• Sealed with a high pressure core 

Schrader valve, specific to nitrogen 

• Performance spring rate with linear 

spring guide 

• Machined 303 Stainless threaded 

pre-load adjuster 

• Increased pre-load range allows fine 

tuning for various riding styles and 

weights 

• Ride quality is smooth and 

controlled 

• Improves stability, cornering and 

traction 

• Eliminates front-end dive during 

aggressive braking and maneuvering 

• Firm feel for high-speed sweeping 

turns 

• Eliminates bottoming out on large 

bumps or potholes 

• Reduces dragging floorboards and 

pegs 

• Designed for optimum performance 

with Legend rear suspension system 

• Includes Maxima Racing Oil in 

cartridge and quart bottle 

• Retain Harley’s new dual bending 

valve technology of stock lower leg 

PART# FITMENT TEXT FORK Ø 

913850 

913851 

913851 

18-23 Softail, except 18-20 FLFB, 18-20 FLFBS 

114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 

18-20 FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 

19 FXFB 114, 19-20 FXDRS 114, 20-23 FXLRS, 

21-23 FLFBS, 21-23 FXFBS, 22-23 FXLRST, 23 

FLFBSANV 

19-20 FXDRS 114, 18-23 FLSB, 18-20 FXFB, 19 

FXFB 114, 18, 20 FXFBS 114, 20-23 FXLRS, 21- 

23 FXFBS, 22-23 FXLRST 

49 mm 

43 mm 

Slammer Fork Kit for M8 Softail 

Drop it like it’s hot with the Slammer Fork Spring Kits for Harley- 

Davidson Milwaukee-Eight (M8) Softail bikes, designed to give 

you a lowered front end and superior ride performance! 

Not only will you get that mean, aggressive, lowered look 

with the Slammer Fork Spring Kit, but you’ll also experience 

a reduction in front end “dive” during braking giving you 

more control and confidence while riding. The springs are 

crafted from high tensile SiCr wire, progressively wound and 

precision ground. All springs are also shot peened and pre-set 

for exceptional durability and performance. The Slammer kit 

includes the components for your choice of either a 1” or 2” 

drop. Engineered to soak up small bumps in the road while still 

being firm enough to absorb the big ones. This means you can 

enjoy a smoother, more stable ride on the road, no matter what 

obstacles come your way. 

• High tensile SiCr (Silicon Chrome) wire 

• Progressively wound 

• Precision ground 


PART# FITMENT DESCRIPTION 

924990 18-20 FLDE, 18-20 FLFB, 18-20 FLFBS 114, 

18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 

18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 

ANV, 18-21 FLSL, 18-20 FXBB, 18-19, 23 

FXBR, 18-20 FXBRS 114, 18 FXBRS 114 

ANX, 18-20 FXLR, 19-20 FLHC 114, 20-23 

FXST, 21-23 FLFBS, 21-23 FLHCS, 21-23 

FXBBS, 21-22 FXBRS 

924991 18-23 FLSB, 18-20 FXFB, 18, 20 FXFBS 

114, 20-23 FXLRS, 21-23 FXFBS, 22-23 

FXLRST, 22 FXRST, 19 FXFB 114 

Conventional 

Fork 

Inverted Fork 

ENGINE 

913850 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



680131 

Burly Fork Lowering Kits 

Lower the front forks 1 1/4" or 2" depending on the spacer 

used. Simple installation with only minor disassembly of forks 

necessary, and easy to return to stock – simply put original fork 

springs back in. Progressively wound springs deliver a compliant 

ride, yet resist bottoming, while bottoming-out at the same 

point as stock to maintain ground clearance. 

28470 Fits 41mm forks on Touring models from 80-13 (except 

02-05 models with cartridge forks), all Softail models 

from 84-17 (except FXCW /C), FXDWG models from 93-05 

and all 4-speed models with 41mm forks. 

28471 Fits 39 mm Showa forks on 88-20 Sportster, 91-03 Dyna, 

except 93-05 FXDWG, 87-94 FXR 

28472 Fits 35 mm Showa forks on Sportster, FX and FXR models 

from 84-87 

Note: Careful evaluation of fender-to-frame clearance is required when installing any lowering 

kit. 

680039 

688967 

15• Drop thru in fork springs lower front end up to 2" 


‘Slammer’ Lowering Kits by Burly 

• Complete lowering kit in one box 

• Easy to install, Fork springs DO NOT require complete 

disassembly of forks! 

• Custom short rear shocks lower rear up to 2.5" 

Fits Touring Models 

680042 Fits 80-13 Touring models, Chrome 

Fits Softail Models 

688968 Fits 00-17 Softail models (except FXCW /C, FXSB/S/SE 

Models), Chrome 

688967 Fits 84-99 Softail models, Chrome 

Fits Dyna Models 

680041 Fits 06-17 Dyna models Chrome 

690200 Fits 06-17 Dyna models, Black 

680040 Fits 91-05 Dyna models, Chrome 

Fits Sportster Models 

680039 Fits 04-15 Sportster models (exc., XR1200), chrome 

680131 Fits 04-15 Sportster models (exc., XR1200), black 

680038 Fits 88-03 Sportster models (exc. XL1200S) chrome 

Damper Tube Assemblies 

Complete damper tube assemblies for most 39 mm Showaequipped 

Big Twin models from 77-99. Sold each. 

For FXWG models from 80-83 

25225 Damper tube assembly fits FXWG models from 80-83 


For 4-speed FL models from late 77-84 

25227 Damper tube assembly fits 4-speed FL models from late 

77-84 (replaces OEM 45831-77) sold each 

For FX Softail Dyna Wide Glide and 4-speed FXWG Models 

84-99 

09287 Damper tube assembly for FX Softail, Dyna Wide Glide 

and 4-speed FXWG models from 84-99 (replaces OEM 

45418-84) 

For FL Softail Models 86-99 

09288 Damper tube assembly for FL Softail models 86-99 

(replaces OEM 45932-86) sold each

APPAREL 

Damper for FL Front Ends 

A complete oil-shock damper valve assembly manufactured to 

rigid specifications. 

26493 Damper tube assembly for all 4-speed FL models from 

49-E77 (replaces OEM 46161-49) sold each 

Fork Leg Lower Stop 

An essential component of Showa front forks. Precisionmachined 

from aluminum billet. Fits all Wide Glide forks from 

late 77-07. Sold each. 

25228 Lower bushing, dampener tube. Fits FL, FXWG, FXST, 

FLST and FXDWG models late 77-99 (replaces OEM 

45834-77) sold each 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

Fork Tube Baffle Assembly 

Accurate reproductions of all of the parts that went into the 

baffle valve and brought together as an assembly. Fits the front 

forks of all FL models from 49-E77. 

09550 Sold each9550 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



160044 

25327 

Seal Retaining Rings 

Sold in 10 packs. 

160044 Fits 39 mm Showa forks on 88-20 

Sportster, 91-03 Dyna, except 

93-05 FXDWG, 87-94 FXR (repl. 

OEM 45905-87) 

160045 Fits FX, FXR and Sportster models 

with 35 mm Showa forks from 

75-87 (repl. OEM 45908-80) 

Seal Retaining Rings 

An accurate reproduction of the Original 

Equipment part. Fits 80-86 FXWG; Softail 

and Dyna Wide Glide models from 84-Up; 

49-84 4-speed FLs, and 80-13 FLT/FLHT 

models. 

09631 Fork seal retaining rings (repl. 

OEM 45842-77) pack of 10 

Fork Tube Bushings for 39 mm 

Front Ends 

Fits 39 mm forks 88-20 Sportster, 87-94 FXR, 

91-05 Dyna, except FXDWG 

160173 Upper bushing (repl. OEM 45461-87) 

160174 Lower bushing (repl. OEM 45465-87) 

160170 

160173 

160172 

Fork Tube Bushings with 

Teflon Coating for 41 mm 

Front Ends 

Fits all models from 84-17 with 41 mm 

forks. Sold in pairs. 

15160170 Lower bushing (repl. OEM 45866- 

84) 

160172 Upper bushing (repl. OEM 45940- 

84) 

Complete Rebuild Kit for 

49mm Forks 

This comprehensive rebuild kit contains 

everything necessary to rebuild a leaking 

49mm front end from the bottom up. 

688661 Rebuild kit for 49 mm forks 

25240 

25239 

Fork Slider Bushings 

Upper and lower fork slider bushings for 

most Wide Glide front forks. 

For Models from 49-E77 

Fit all models with FL front fork sliders, 

and are of the correct rolled type, steel 

backed with full surface bronze interior 

facing. Lower bushing bronze face 

features a spiral oil groove for smoother 

fork action and additional lubrication. 

25239 Lower bushing (sold each) 

25240 Upper bushing (sold each) 

For Models from 84-17 with 41mm 

forks 

Fit the front sliders on all Wide Glide fork 

assemblies 84-17 with 41mm forks. 

09272 Lower bushing (repl. OEM 45866- 

84) sold each 

09271 Upper bushing (repl. OEM 45940- 

84) sold each 

41 mm Fork Slider Assembly/ 

Rebuild Kit 

Complete high quality kit includes all 

necessary bushings, seals, washers and 

clips to assemble or rebuild a set of 41 mm 

fork legs. 

688308 Fits all front ends from 84-17 

Adjustable Split Fork Seal 

Driver Set by K&L Supply 

Replace fork seals without removing the 

inner fork tube from the T-clamp. Set 

includes: one Split Seal Driver and three 

Seal Guides 35mm, 39mm, 41mm. 

400349 Fork Seal Installer. Use on 35mm, 

39mm, and 41mm fork tubes 

Motor Factory Fork Seals and 

Rebuild Kits 

Fork seals only or kits that include a pair of 

fork seals, and necessary washers to rebuild 

forks to like new performance. 

For Sportster, Dyna Glide, FX and FXR 

Models 

Seals (pack of 10) 

54373 Fit Sportster and FX models from 

73-76 with Kayaba forks (repl. 

OEM 45927-73) 

54376 Fit Sportster, FX and FXR models 

from 75-83 with Showa forks (repl. 

OEM 45400-75) 


from 84-87 with 35 mm Showa 

forks (repl. OEM 45387-83) 

54387 Fits 39 mm forks 88-20 Sportster, 

87-94 FXR, 91-05 Dyna, except 

FXDWG 

Rebuild Kits 

19494 Fits Sportster and FX models from 

71-72 


from 75-83 with Showa forks (repl. 

OEM 45400-75) 


from 84-87 with 35 mm Showa 

forks (repl. OEM 45387-83) 

25387 Fits 39 mm forks 88-20 Sportster, 

87-94 FXR, 91-05 Dyna, except 

FXDWG 

For FL, FLT/FLHT, 4-Speed FXWG, Softail 

and Dyna Wide Glide Models 


54349 Fit FL models 49-E77 (repl. OEM 

45852-48) 

54377 Fit FL models late 77-84, FXWG and 

FLT/FLHT models from 80-83 (repl. 

OEM 45843-77) 

54384 Fit FLT/FLHT, 4-speed FXWG, Softail 

and FXDWG (except 06-17) models 

from 84-17 (repl. OEM 45875-84), 

(41mm) 


160225 Fits FLT, FLST, FXWG and FXST models 

84-99. (repl. OEM 45875-84) 

Rebuild Kits 

19362 Fit FL models 49-E77 (repl. OEM 

45852-48) 

25330 Fit FL models late 77-84, FXWG and 

FLT/FLHT models from 80-83 (repl. 

OEM 45843-77) 

25385 Fit FLT/FLHT, 4-speed FXWG, Softail 

and Dyna Wide Glide models from 

84-05 (repl. OEM 45875-84) seal 

and retainer clip only 

160066 Fits FXST, FLST, FXWG and FXDWG 

models from 84-99. (repl. OEM 

45849-84) 


APPAREL 

688685 

SEATS & 

TOURING 

Tracker FXD 06-17 (except FXDF, 

FXDWG, FLD) 

FOOT 

CONTROLS 

688684 

HAND 

CONTROLS 

Tracker Narrow XL 88-17 (except 

XL1200X 10-17, XL883L 11-17, XL1200C 

11-17), FXR 88-94 and FXD 93-05 

688687 

Tomahawk Fork Brace with 

Billet Mounting Brackets for 

Dyna Models 

This fork brace is laser cut from 3/16” 

thick steel and replaces the front fender 

on your bike while increasing rigidity 

to the front fork for a more stable ride. 

Designed to work with either a 21” or 

19” wheel. Kits come complete with 

fork brace, mounting brackets and all 

necessary hardware. Will fit all 06-17 Dyna 

Models with 49mm forks except FXDWG, 

FXDF, FLD models. 

LIGHTING 

ELECTRICAL 

EXHAUST 

Tracker Wide FXST 84-17, FLST 84-17, 

FXDWG 93-05 

688750 Chrome Tomahawk fork brace, 

fits all 06-17 Dyna models with 

49 mm forks 

INTAKE 

ENGINE 

Fork Truss 

When the front fender is removed from 

the stock forks it may look good but you 

end up with a “flexy flyer” that twists 

and sways more than a drunken sailor. We 

found this out when we started putting 

wide, 21” wheels on our Softails. Bring the 

performance back by keeping your front 

wheel going in the direction you point it. 

Tracker Narrow for 88-20 Sportster, 

87-94 FXR, 93-05 Dyna with narrow 

fork 

896018 Black Powdercoat 

896019 Black Ops 

Tracker Wide for 84-17 Softail, 93-05 

FXDWG models 

896020 Black Powdercoat, 

896022 Black Ops 

Fork Braces for Narrow Gilde 

Forks by ODC 

Compatible with 19“ and 21“ front wheel. 

618391 For Sportster 88-20 and FXR/ 

91-05 FXD 88-05 except 16-19 

Forty Eight, 93-05 FXDWG 

688686 

Fork Braces for Narrow and 

Wide Glide Forks 

These custom front fork braces are 

made from laser cut 3/16“ thick steel, 

allows removal of the front fender and 

increases rigidity to the front fork better 

than stock, eliminating any fork twist 

while safeguarding the integrity of the 

suspension. The custom styling looks 

great on any motorcycle, available in 

black or chrome finish, for use with 19“ & 

21“ wheels & tires. Narrow Glide & Wide 

Glide kit applications available, mounting 

hardware supplied, sold each. For 88-20 

Sportster, 87-94 FXR, 93-05 Dyna with 

narrow fork 

688684 Black, fork brace for Wide Glide, 

84-17 Softail, 93-05 FXDWG 

688685 Chrome, fork brace for Wide 

Glide, 84-17 Softail, 93-05 

FXDWG 

688686 Black fork brace for 88-20 

Sportster, 87-94 FXR, 93-05 Dyna 

with narrow fork 

688687 Chrome fork brace for 88-20 

Sportster, 87-94 FXR, 93-05 Dyna 

with narrow fork 


46962, 46966 

889119 

889118 

Billet Aluminum Fork Braces 

by Custom Cycle Engineering 

The unique compound design, arching 

both upward and rearward, provides 

improved handling by offering the best 

possible resistance to deflection, twisting 

and bending. Chrome-plated. 

46962 Fits 41 mm Wide Glide forks (will 

not work with FL-style shrouded 

forks) except Deuce models 

46966 For 88-20 Sportster, 87-94 FXR, 

93-05 Dyna with narrow fork 

889118 Fits Dyna Glide 49 mm forks, 

chrome (exc. FLD, FXDWG, FXDF) 

889119 Fits Dyna Wide Glide 49 mm 

Forks, only FXDWG, FXDF 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Aluminum Fork Brace for 

Sportster and FX Models 

Forged chrome fork brace combines form 

and function to create a lightweight, 

but extremely strong brace. Precise 

machining makes fit and installation a 

breeze. Improves the rigidity of forks for 

better handling and control under heavy 

braking. 

160105 Fits 35 mm forks on Sportster 

models from 75-87, FX models 

from 73-85 (except FXWG and 

FXST) and FXR models from 

82-87 

Tweek Bar for 41mm Forks 

This chrome 2-piece fork brace adds 

stability to any 41mm front end but is 

especially useful for overlength forks or 

when the front fender “fell off”. 

688699 Fits FLH 49-84, FXWG 80-86 and 

FXST 84-15 (exc. 08-11 FXCW/ 

FXCWC, 13-17 FXSB/S/SE) 


Fork Brace by Kuryakyn 

Increase front end stability and control 

with this high-style, precision-engineered 

fork brace. Made in the USA. 

48040 Fits FX Softail, Dyna Wide Glide 

and 4-speed FXWG models from 

80-15 (except Deuce models), (41 

mm) 

Note: Will not fit models with slider covers (cowbells). 

Fork Brace 

912720 

• Stabilizes front fork 

• Easy bolt-on design 

Field of Application: For use with OE fork. , Color: Gloss 

Black Powder Coated , Position: Front , Unit: Each , Qty.: 1 

FITMENT DESCRIPTION BLACK/ 

GLOSS BLACK 

POWDER 

COATED 

12-16 XL1200V With OEM 

Wheel 

917143 


FLFBS 114 ANV, 21-23 FLFBS, 23 FLFBSANV, For use 

with OE fork 

18-20 FXBB, 20-23 FXST, 21-23 FXBBS, For use with 

OE fork 

912721 

With OEM 

Wheel 

With OEM 

Wheel 

18-21 FLSL With OEM 

Wheel 

22-23 Nightster RH975, 23 Nightster Special RH975S, 

For use with OE fork 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 

14-17 FLSTF, 93-96, 05, 07-12, 14-17 FLSTN, 01-06 

FLSTCI, 01-06 FLSTFI, 05 FLSTFSE, 05-06 FLSTNI, 06 

FLSTFSE2, 06 FLSTI, 10-12, 14-17 FLSTFB, 12, 14-17 

FLS, 13 FLS 103, 13 FLSTC 103, 13 FLSTC 103 ANV, 

13 FLSTF 103, 13 FLSTFB 103, 13 FLSTN103, 14-15 

FLSTNSE, 16-17 FLSS, 16-17 FLSTFBS 

86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 

14-17 FLSTF, 93-96, 05, 07-12, 14-17 FLSTN, 01-06 






86-90 FLST, 88-03, 07-12, 14-17 FLSTC, 90-00, 03-12, 

14-17 FLSTF, 93-96, 05, 07-12, 14-17 FLSTN, 01-06 






Fork Lowering Kit 

Certification: With Approval , Unit: Kit , Qty.: 1 

PART# 

FITMENT 

917136 06-17 Dyna 

With OEM 

Wheel 

In 

combination 

with 21“ 

Wheel 

In 

combination 

with 23“ 

Wheel 

With OEM 

Wheel 

917135 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 FXSB 

923624 

913132 

912720 

913133 

923625 

917140 

917141 

917142 

912721 18-23 Softail, except 18-20 FXFB, 18, 20 FXFBS 114, 18-23 FLSB, 19-20 FXDRS 

114, 19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 22-23 FXLRST, 22 FXRST 

917137 09-16 Sportster, except 09-10 XR1200, 09-15 XL883R, 10-13 XR1200X, 10-16 

XL1200X, 16 XL1200CX 

923624 22-23 Nightster RH975, 23 Nightster Special RH975S 


APPAREL 

FINE THREAD 

1 

OEM 45953-68 

OEM 45953-71 

2 

OEM 45977-73 

3 

OEM 45407-75 

OEM 45644-77 

4 

OEM 45407-83 

OEM 45392-83 

5 

OEM 45381-87 

OEM 45393-87 

6 

OEM 45825-77A 

OEM 45417-80 

7 

OEM 45827-84 

OEM 45417-84 

OEM 45930-86 

8 

OEM 45950-48 

HARD 

CHROME 

SHOW 

CHROME 

LENGTH 

TOTAL 

LENGTH 

(INCH) 


TOTAL 

LENGTH 

(MM) 

MODEL FITMENT 

Ø 41MM 49- 76 FL 8 

n/a 642326 Std. 20,5 521 

n/a 642327 +2" 22,5 572 

Ø 41MM 77-83 FL 6 

n/a 642328 Std. 20,75 527 Std. lenghts L77-84 FL;80-83 

FLT 

n/a 642329 +2" 22,75 578 

n/a 642330 +4" 24,75 629 

Ø 41MM 80-83 FXWG 6 

n/a 642328 Std. 20,75 527 

n/a 642329 +2" 22,75 578 

n/a 642331 Std. 24,75 629 

n/a 642332 +2" 26,75 679 

n/a 642333 +4" 28,75 730 

Ø 41MM 84-96 FL, 84-99 FLST, 84-99 FXST, 84-99 FXDWG 7 

642309 642334 

-4" 20,25 514 Std. lenghts 84-99 FL models 

(note: stock lenghts is 20 7/8“) 

642310 642335 

-2" 22,25 565 Std. lenghts 84-99 FLST models 

(note: stock lenghts is 22 7/8“) 

642311 642336 

Std. 24,25 616 Std. lenghts 84-99 FXST, FXWG 

models 

642312 642337 +2" 26,25 667 

642313 642338 +4" 28,25 718 

642314 642339 +6" 30,25 768 

926471 642340 +8" 34,25 870 

Ø 41MM 97-05 FLT, 06-08 FLT NON-FAIRING, 00-17 FLST AND FXST, 00-05 FXDWG 7 

642320 642341 

-4" 20,25 514 Std. lenghts 97-05 FLT, 06-08 

FLT non fairing 

642321 642342 -2" 22,25 565 Std. lenghts 00-17 FLST Models 

642322 642343 

Std. 24,25 616 Std. lenghts 00-15 FXST, FXWG 

Models 

642323 642344 +2" 26,25 667 

642324 642345 +4" 28,25 718 

642325 642346 +6" 30,25 768 

926472 642347 +8" 32,25 819 

926473 642348 +10" 34,25 870 

Ø 35MM 73-74 XL, 73-77 FX (KAYABA FORKS) 2 

n/a 642349 -2" 21,5 546 

n/a 642350 Std. 23,5 597 

n/a 642351 +2" 25,5 648 

Ø 35MM 75-83 XL, 79-82 XLS, 76-83 FX ,FXE, 77-83 FXS, FXB, FXR & FXRS 

3 

(SHOWA FORKS) 

n/a 642352 -2" 21,25 540 

Std. 23,25 591 Std. lenghts 75-83 XLH,XLCH, 

n/a 642353 

XLCR, 83 XLS, 76-83 FX, 

FXE,FXEF 

n/a 642354 

+2" 25,25 641 Std. lengths 79-82 XLS, FXS, 

FXB, FXSB, FXR, 77-83 FXRS 

n/a 642355 +4" 27,25 692 

Ø 35MM 84-86 XL, 84-85 FX, 84-86 FXR, 83-86 FXRD, FXRT, 84-85 FXSB, 85-86 4 

FXRS 

926474 642356 -2" 21,5 546 

926475 642357 

Std. 23,5 597 Std. lenghts 83-86 XL, 84-85 FX, 

84-86 FXR 

926476 642358 

+2" 25,5 648 Std. lenghts 83-86 FXRD,FXRT, 

84-85 FXSB, 85-86 FXRS 

926477 642359 +4" 27,5 699 

Ø 39MM 88-20 XL (EXCEPT XL1200S/X/CX, XR1200, 883N), 87-94 FXR, 91-05 5 

DYNA (EXCEPT FXDX, FXDXT, FXDWG) 

642315 642360 -2" 22,25 565 

642316 642361 Std. 24,25 616 

642317 642362 +2" 26,25 667 

642318 642363 +4" 28,25 718 

642319 642364 +6" 30,25 768 

ILLUUS. 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


49mm Hard Chrome Fork Tubes 

• Hard Chrome is a durable low shine finish 

Color: Hard Chrome , Diameter: 49 mm, Unit: Pair , Qty.: 1 

FAMILY FITMENT DESCRIPTION DIAMETER HARD 

CHROME 

Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 +2“ FXD/ Stock 49 642305 

FXDWG 

Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 +4“ FXD/ +2“ FXDWG 49 642306 



Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 -2“ FXD/ -4“ FXDWG 49 642303 

Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 Stock FXD/ -2“ FXDWG 49 642304 

Softail 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21- Stock 49 922642 

23 FLFBS, 23 FLFBSANV 

Softail 18-21 FLSL, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 +2“ 49 922634 

FLDE, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 18-20 FXLR, 18-20 

FXBB, 19-20 FLHC 114, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 21-22 

FXBRS, 23 FLHCSANV 





Softail 18-21 FLSL, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 Stock 49 922633 




Sportster 16-20 XL1200X, 19-20 XL1200XS Stock 49 922654 

Touring 17-23 Touring Stock 49 922648 

49 mm Black DLC Fork Tubes 

• DLC is a low friction, corrosion resistant & an extremely hard finish 

15Fitment: 18-21 FLSL, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLDE, 18-21 FLHC, 18 FLHCS 114, 

18 FLHCS 114 ANV, 18-20 FXLR, 18-20 FXBB, 19-20 FLHC 114, 20-23 FXST, 21-23 FXBBS, 21-23 FLHCS, 21-22 FXBRS, 23 

FLHCSANV, Color: Black , Diameter: 49 mm, Unit: Pair , Qty.: 1 

PART# DESCRIPTION OEM # LENGTH MM LENGTH 

922636 Stock 45500376 603.2 23,75“ 

922637 +2“ 654 25,75“ 

922638 +4“ 704.9 27,75“ 


APPAREL 

49mm Show Chrome Fork Tubes 

Fork tubes in different length versions show chromed. 

Color: Show Chrome , Diameter: 49 mm, Unit: Pair , Qty.: 1 

FAMILY FITMENT DESCRIPTION DIAMETER SHOW 

CHROME 

Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 +2“ FXD/ Stock FXDWG 49 642367 




Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 -2“ FXD/ -4“ FXDWG 49 642365 

Dyna 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 Stock FXD/ -2“ FXDWG 49 642366 

Softail 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 21- Stock 49 922639 

23 FLFBS, 23 FLFBSANV 









Softail 18-21 FLSL, 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 Stock 49 922630 




Sportster 16-20 XL1200X, 19-20 XL1200XS Stock 49 922651 

Touring 17-23 Touring Stock 49 922645 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

49 mm 

917581, 917582 

41 mm 

917578, 917579 


39 mm 

917575, 917576 

Fork Tube Extension Kit 

Now you can get a longer front fork without having to install longer inner fork tubes. These fork tube extensions replace the stock 

fork tube caps and are made from solid, hi-grade steel with a chrome finish. 

• Available for 39, 41 and 49 mm forks 

• Applications ads 2“ or 4“ of fork length 

• Easy mounting compare to longer inner tubes 

Color: Chrome , Position: Front , Material: Steel , Unit: Pair , Qty.: 1 

PART# FITMENT DESCRIPTION DIAMETER 

MM 

917581 02-17 V-Rod, 06-17 Dyna, 14-23 Touring, 18-23 Softail, 13-14 FXSBSE, 14-17 

FXSB, 08 FXCW, 08-11 FXCWC, except 18-20 FXFB, 18, 20 FXFBS 114, 18-23 

FLSB, 19-20 FXDRS 114, 19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 22-23 FXLRST, 

22 FXRST 

917582 02-17 V-Rod, 06-17 Dyna, 14-23 Touring, 18-23 Softail, 13-14 FXSBSE, 14-17 

FXSB, 08 FXCW, 08-11 FXCWC, except 18-20 FXFB, 18, 20 FXFBS 114, 18-23 

FLSB, 19-20 FXDRS 114, 19 FXFB 114, 20-23 FXLRS, 21-23 FXFBS, 22-23 FXLRST, 

22 FXRST 

917579 77-84 FL Shovel, 84-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 

14-17 FXSB, 16-17 FXSE, 85-13 Touring, 80-85 FXWG, 93-03 FXDWG, 02 

FXDWGSE3, 04-05 FXDWGI 

917578 77-84 FL Shovel, 84-17 Softail, except 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 

14-17 FXSB, 16-17 FXSE, 85-13 Touring, 80-85 FXWG, 93-03 FXDWG, 02 

FXDWGSE3, 04-05 FXDWGI 

917575 88-20 Sportster, except 10-20 XL1200X, 19-20 XL1200XS, 16-20 XL1200CX, 09- 

20 XL883N, 10-13 XR1200X, 08-10 XR1200, 18 XL1200X ANX, 96-03 XL1200S, 

87-94 FX Model, 91-05 Dyna, except 93-03 FXDWG, 99-03 FXDX, 01-03 FXDXT, 

02 FXDWGSE3, 04-05 FXDWGI, 04-05 FXDXI 

917576 87-20 Sportster, except 10-20 XL1200X, 19-20 XL1200XS, 16-20 XL1200CX, 09- 

20 XL883N, 10-13 XR1200X, 08-10 XR1200, 18 XL1200X ANX, 96-03 XL1200S, 

87-94 FX Model, 92-05 Dyna 

Fork Diameter: 

49mm, Length: 2“ 











LENGTH 

MM 

49 50.8 

49 101.6 

41 101.6 

41 50.8 

39 50.8 

39 101.6 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Fork Oil Seals 


Fork Dust Seal Only Kit 


FITMENT 

PART# 

06-17 Dyna, except 12, 14-16 FLD, 13 FLD103, 18-23 921753 

Softail, 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14- 

17 FXSB, 14-23 Touring, 14-23 Trike, 02-11 V-Rod, 

except 06-07 VRSCR, 09-11 VRSCF, 16-20 XL1200X, 18 

XL1200X ANX, 19-20 XL1200XS 

84-15 Softail, except 13-14 FXSBSE, 14-15 FXSB, 85 921757 

FXWG, 93-03 FXDWG, 02 FXDWGSE3, 04-05 FXDWGI, 

Fits only FX Softail models 

84-87 Sportster, 84 FX Shovel, except 84 FXWG, 85-87 921756 

FX Model 

86-17 Softail, except 13-14 FXSBSE, 14-17 FXSB, 82-84 921755 

FL Shovel, 86-13 Touring, 09-13 Trike, 12, 14-16 FLD, 

13 FLD103 

88-20 Sportster, except 08-10 XR1200, 10-13 XR1200X, 921754 

16-20 XL1200X, 16-20 XL1200CX, 18 XL1200X ANX, 

19-20 XL1200XS, 91-05 Dyna, except 93-03 FXDWG, 

02 FXDWGSE3, 04-05 FXDWGI, 89-94 FX Model 

Victory: 15 Gunner, 12-17 High Ball, 09-17 Vegas 990131 

8 Ball, 14-16 Hammer 8 Ball, 13-17 Judge, 15-17 

Magnum, 12-13, 16 Cross Country 

Victory: Classic Cruiser 03, Deluxe Cruiser 01-02, 990133 

Deluxe Touring Cruiser 02, Standard Cruiser 01-02, 

Touring Cruiser 02-06, Vision 08 

Victory: Hammer 05-08, Kingpin 04-08 990132 

FITMENT 

PART# 


Softail, 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 

FXSB, except 19-20 FXDRS 114, 18-20 FXFB, 19 FXFB 

114, 18-22 FLSB, 20-23 FXLRS, 18, 20 FXFBS 114, 21-23 

FXFBS, 22-23 FXLRST, 22 FXRST, 14-23 Touring, 14-23 

Trike, 02-11 V-Rod, except 06-07 VRSCR, 09-11 VRSCF, 

49 mm Fork Tubes 

84-17 Softail, except 88-03 FXSTS, 95-97 FXSTSB, 921745 

98-03 FLSTS, 01-03 FLSTSI, 01-02, 04-06 FXSTSI, 05-06 

FLSTSCI, 07 FLSTSC, 07 FXSTSSE, 08-11 FLSTSB, 08 

FXSTSSE2, 08 FXCW, 08-11 FXCWC, 09 FXSTSSE3, 13-14 

FXSBSE, 14-17 FXSB, 16-17 FXSE, 84 FL Shovel, 86-13 

Touring, 09-13 Trike, 84-85 FXWG, 93-03 FXDWG, 02 

FXDWGSE3, 04-05 FXDWGI, 12, 14-16 FLD, 13 FLD103, 

41 mm Fork Tubes 

84-87 Sportster, 85-87 FX Model, except 87 FXLR, 84 

FXR, 84 FXRS, 84 FXRSDG, 84 FXRT, 35 mm Fork Tubes 921743 

88-20 Sportster, except 08-10 XR1200, 10-13 XR1200X, 921744 


19-20 XL1200XS, 89-94 FX Model, 91-05 Dyna, except 

93-03 FXDWG, 04-05 FXDWGI, 39 mm Fork Tubes 

Victory: 15-17 Gunner, 12-15 High Ball, 09-17 Vegas 8 990128 

Ball, 12-16 Hammer 8 Ball, 12, 16-17 Hammer S, 13-14 

Judge, 15-17 Magnum, 12-13, 16 Cross Country 

Victory: Classic Cruiser 03, Deluxe Cruiser 01-02, 990130 

Deluxe Touring Cruiser 02, Standard Cruiser 99-02, 

Touring Cruiser 02-06, Vision 08 

08-10 XR1200, 10-13 XR1200X, 19-20 XL1200CX, 16-17 990127 

FXSE, 18-20 FXFB, 18, 20 FXFBS 114, 19 FXFB 114, 19- 

23 FLSB, 19-20 FXDRS 114, 20-23 FXLRS, 21-23 FXFBS, 

22-23 FXLRST, 22 FXRST, Victory: Hammer 05-08, 

Kingpin 04-08 

Victory: Special Edition 00, Sport Cruiser 00-01 990129 


49 mm Front Fork Seal and Bushing Kit 

• Includes seal and bushing 

Part#: 919696 , Fitment: 06-17 Dyna, except 12, 14-16 FLD, 

13 FLD103, 18-23 Softail, 08 FXCW, 08-11 FXCWC, 14-17 

FXSB, 13-14 FXSBSE, except 19-20 FXDRS 114, 18-23 FLSB, 

18-20 FXFB, 19 FXFB 114, 20-23 FXLRS, 18, 20 FXFBS 114, 

21-23 FXFBS, 22-23 FXLRST, 22 FXRST, 02-11 V-Rod, except 

09-11 VRSCF, 06-07 VRSCR, 14-23 Touring, 14-23 Trike , Unit: 

Kit , Qty.: 1 

Fork Tube Damper 14mm Bolt and Seal Kit 

• Kit of 2 Screws and Seals 

Part#: 919698 , Fitment: 06-17 Dyna, 07-17 Softail, OEM #: 

46614-06 , Unit: Kit , Qty.: 1 

Fork Seal and Dust Seal Kit 


FITMENT 

PART# 


Softail, 08 FXCW, 08-11 FXCWC, 13-14 FXSBSE, 14-17 

FXSB, except 19-20 FXDRS 114, 18-20 FXFB, 19 FXFB 

114, 18-22 FLSB, 20-23 FXLRS, 18, 20 FXFBS 114, 21-23 

FXFBS, 22-23 FXLRST, 22 FXRST, 14-23 Touring, 14-23 

Trike, 02-11 V-Rod, except 06-07 VRSCR, 09-11 VRSCF, 

16-20 XL1200X, 18 XL1200X ANX, 19-20 XL1200XS 

15-20 Street, except 18-20 XG750A 921751 

15 Gunner, 12-15 High Ball, 09-15 Vegas 8 Ball, 13-14 

Judge 

84-15 Softail, except 13-14 FXSBSE, 14-15 FXSB, 

08 FXCW, 08-11 FXCWC, 85 FXWG, 93-03 FXDWG, 

02 FXDWGSE3, 04-05 FXDWGI, Fits only FX Softail 

models 

84-87 Sportster, 84 FX Shovel, except 84 FXWG, 85-87 

FX Model 

86-17 Softail, except 13-14 FXSBSE, 14-17 FXSB, 16-17 

FXSE, 86-13 Touring, 09-13 Trike, 00-02 X1, 03 XB, 99 

S3, 12, 14-16 FLD, 13 FLD103 

88-20 Sportster, except 08-10 XR1200, 10-13 XR1200X, 


19-20 XL1200XS, 89-94 FX Model, 91-05 Dyna, except 

93-03 FXDWG, 04-05 FXDWGI 

990125 

921752 

921747 

921749 

921748 


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Fork Bushing Kit 

• Bench tested with 500000 impacts 

• Less wear than OE parts 

• With sliding bushings, lock- and sealing rings 

• The set does not contain oil seals and dust caps 

Part#: 921736 , Fitment: 06-17 Dyna, except 12, 14-16 FLD, 

13 FLD103, 02-11 V-Rod, except 06-07 VRSCR, 09-11 VRSCF, 

08 FXCW, 08-11 FXCWC , Unit: Kit , Qty.: 1 

Oil Seal Kit Front Fork by James Gaskets 

667105 84-13 FLT, FLTC, 84-17 FXST/C FLHS FLST/C/N FLHT 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

667857 

INTAKE 

ENGINE 

667460 

Seal Kit Front Fork By James Gaskets 

667128 01-11 V-Rod Models (except 06 & Up VRSCR Models)Sec 


GASKETS 

Genuine James Gaskets Fork Seals 

• Patented seal design 

• Superior material for longer seal life 

• Innovative seal design reduces lip distortion and drag 

• Renowned James Gasket quality 

49 mm Fork Seals 

667857 06-17 Dyna, except FLD, 02-11 V-Rod, except 06-07 

VRSCR, 09-11 VRSCF, 08-11 FXCW/C, 13-17 FXSB/S, sold in 

pairs 


667456 84-17 Softail, 85-13 Touring, 84-85 FXWG, 93-03 FXDWG, 

02 FXDWGSE3, 04-05 FXDWGI, 12, 14-16 FLD, 13 FLD103, 

sold EACH 

667458 00-07 Deuce FXSTD models, sold in PAIRS 

667451 84-86 FLT, FLHTP models, sold EACH 

667461 77-84 FL, FLH, FLT models, sold EACH 

667452 49-77 FL, FLH models, pack of 5 


667457 88-20 Sportster, 87-94 FRX, 91-05 Dyna, sold EACH 

667455 75-83 XL, FX Showa style, sold EACH 

667454 73-77 XL, FX Kayaba style, pack of 5 

667453 71-72 XL, FX, pack of 5 


667460 84-87 FX, FXR, XL models, sold EACH 

39 mm fork seals 

667450 Fork dust seal cover 39 mm for 88-20 Sportster, 87-94 

FXR, 91-05 Dyna 


667856 Dust seal for 06-17 Dyna, except 12-16 FLD, 02-11 V-Rod, 

08-13 FXCW/C, 13-17 FXSB/S, 18-23 Softail, except models 

equipped wit up-side down fork 

Oil Seal Kit by James Gaskets 

667107 Front Fork, 71 & 72 Only, XLH, XLCH, FX2 

Seal Kit by James Gaskets 

667129 Front Fork, 06-17 Dyna, except 12, 14-16 FLD, 13 FLD103 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




667106 Front Fork, 84-87, FXR, FXRS, 

FXRT, FXSB, FXEF, 84-E87 

Sportster 


667135 Front Fork, 77-84, FL, FLH, FLH- 

80, FLT-80, FLT Classic5 

Seal Kit Front Fork by James 

Gaskets 

667127 00-07, Softail Deuce FXSTD 

Gasket & Seal Kit by James 

Gaskets 

667130 Front Fork, with Felt Washer, 49 - 

Early 77, FL, FLH 

Seal Kit by James Gaskets 

667140 Front Fork, 96-03 Sportster Sport 

Oil Seal Kit by james Gaskets 

667134 Front Fork, 75-83, Sportster & 

76-83 FX, FXE, FXSB, FXR 



Gaskets 

667138 Fork Air Control, 84-93 FXR1, 

84-96 Touring 


Gaskets 

667131 Front Fork with Metal Spacer, 49 

- Early, 77, FL, FLH 


667139 Front Fork L87-94 FXR, 88-20 

Sportster, 91-05 Dyna (exc. 16-20 

XL1200X, 93-05 FXDWG) 

Oil Seal Kit by James gaskets 

667133 Kayaba Fork, 73 & 74, XLH, XLCH, 

& 1973-1977 FX 


APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Athena Fork Seals 

• High-quality seals 

• Sold in pairs on a display card 

MODELS YEARS SIZE(MM) PART 

For Sportster models with 35 mm forks 84-87 35 x 48 x 11 8613014 

For Sportster models with 39 mm forks 88-20 39 x 52 x 11 8613015 

For Sportster with 49 mm forks 16-20 49 x 60 x 10 652758 

For 4-speed FX models with 35 mm forks 84-85 35 x 48 x 11 8613014 

For 4-speed FX models with 41 mm forks 80-83 41.3 x 54 x 13 8613013 

For 4-speed FX models with 41 mm forks 84-86 41 x 54 x 6.5 8613012 

For FXR models with 35 mm forks 84-87 35 x 48 x 11 8613014 

For FXR models with 39 mm forks 87-94 39 x 52 x 11 8613015 

For Dyna Glide models with 39 mm forks 91-05 39 x 52 x 11 8613015 

For Dyna Glide models with 41 mm forks 93-05 41 x 54 x 6.5 8613012 

For Softail models with 41 mm forks 84-17 41 x 54 x 6.5 8613012 

For 4-speed FL models with 41 mm forks 77-84 41.3 x 54 x 13 8613013 

For 5-speed Touring models with 41 mm forks 80-83 41.3 x 54 x 13 8613013 

For 5-speed Touring models with 41 mm forks 84-13 41 x 54 x 6.5 8613012 

For Touring and Trikes with 49 mm forks 14-23 49x60x10 652758 

For 4-speed FX models with 41 mm forks 84-86 41 x 54 x 11 5631041 

For Dyna Glide models with 41 mm forks 93-05 41 x 54 x 11 5631041 

For Softail models with 41 mm forks 84-17 41 x 54 x 11 5631041 

For Softail models with 49 mm forks 08-23 49x60x10 652758 

For 5-speed Touring models with 41 mm forks 84-13 41 x 54 x 11 5631041 

For Dyna Glide models with 49 mm forks 06-17 49 x 60 x 10 652758 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Fork Oil Level Adjuster by Progressive Suspension 

Simply adjust the aluminum stop to the desired fork oil level, insert in the top of the fork and extract the excess fork oil. Also 

removes unwanted fluids from hard to get places. 

84177 Fork oil level adjuster 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



899813 899814 

FORK OIL 

• Recommended for use with our fork suspension products. 

Available in a Standard 10wt Type E and Heavy Duty 20wt. 

Our special blend formula helps provide superior damping 

and long lasting lubrication along with anti-foaming, anti-rust 

and anti-corrosion attributes. It also maintains temperature 

stability, minimizes fluid leakage, resists fading while 

preserving fork seals. Exceeds all known OEM and Harley- 

Davidson warranty requirements. Made in the USA! 

PJ1 Fork Oil and Contact Cleaner 

Fork Oil 

PJ1 Fork Oil maintains the same viscosity at a wide range of 

outside temperatures. 

3811268 15 weight (1/2 liter) sold each 

3811272 20 weight (1/2 liter) sold each 

3811276 30 weight (1/2 liter) sold each 

PART# OEM# DESCRIPTION 

899813 62600026 Standard SAE 10 

899814 Heavy-Duty SAE 20 

914561 

Motorbike Fork Oil 

Full synthetic fork oil and shock-absorber oil. Reduces shear 

losses and provides sure handling performance even after 

long use. Prevents foam formation and seal hardening. Good 

corrosion and wear protection provide long service life. 

15Can be used universally in telescopic forks, shock absorbers in 

motorcycles, motor bicycles, mopeds and other two-wheeled 

vehicles. 

• Permanent corrosion protection 

• Increases driving safety 

• High wear protection 

• Prevents gasket sources 

• Prevents foaming 

PART# DESCRIPTION CAPACITY (L) QTY. 

914559 

914561 

914564 

914565 

Motorbike Fork Oil 10W 

medium, 500ml 

Motorbike Fork Oil 15W 

heavy, 500ml 

Motorbike Fork Oil 10W 

medium, 1l 

Motorbike Fork Oil 15W 

heavy, 1l 

0.5 1 

0.5 1 

1 1 

1 1 




APPAREL 

AIR REAR SCHOCKS 

Legend Air; Legend Air-ST and Legend Air-A: 

• All new Legend AIR Suspensions Systems sets the high mark in 

ultimate ride quality 

• New redesigned exclusive Aramid Fiber air spring technology 

provides spring rate adjustability 

• Air springs maximize wheel travel and adjust to any desired 

ride height 

• Fitment accommodates 13“ and 12“ needs 

• Spherical mount bearings top and bottom 

• Hard anodized machined aluminum bodies 

• Legend‘s low-friction seals eliminate stiction 

• High flow piston reacts quickly for improved fluid flow 

management 

• Deflective disc valved damping self adjust to frequency and 

ensures controlled performance 

• Air compressor included, pre-wired, and model specific 

mounting 

• Complete wire harness installed with three easy Deutsch 

connections 

• System includes OEM looking black handlebar mounted 

control for easy „on-the-go“ adjustability 

• Optional chrome handlebar mounted control sold separately 

(CCE# 890051, 890053 for FLTR 15-) 

• Made by hand in Sturgis, South Dakota, USA 

Additional Features on Legend Air-A: 

• All the benefits of the new AIR Suspensions Systems above, 

plus six external knob adjustments allow fine-tuning of 

rebound 

• Provides optimum rebound performance for any given rider 

weight, personal ride quality preference, or personal riding 

style 

• Light to heavy riders can fine-tune ride preference 

• Aggressive to casual riding styles can tune to desired quality or 

personal preference 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

913849 Mono Shock 

TRANNY & 

CLUTCH 

DRIVELINE 

FITMENT 

FITMENT 

NOTE 

DESCRIPTION 

ERP 

CERTIFICATION 

HEIGHT 

ADJUSTABLE 

REBOUND, 

HEIGHT 

ADJUSTABLE 

06-17 Dyna Twin Shocks Approval CCE 690823 690825 

HEIGHT 

ADJUSTABLE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

00-17 Softail Twin Shocks Approval CCE 697148 

18-23 Softail, except 19-20 

FXDRS 114, 20-23 FXST, 21-23 

FXBBS, 22-23 FXLRST, 22 FXRST 

Mono Shock Approval CCE 913849 

89-99 Softail Twin Shocks Approval CCE 697147 

04-13 Sportster 

15-16 FLTRUSE, 15-23 FLTRXS, 

16-19 FLTRU, 18-23 FLTRX, 18- 

19, 21-22 FLTRXSE 

99-23 Touring, except 15-16 

FLTRUSE, 15-23 FLTRXS, 16-19 

FLTRU, 18-23 FLTRX, 18-19, 

21-22 FLTRXSE, 20-23 FLTRK, 

22-23 FLTRXST, 22 FLTRKSE, 23 

FLTRKSEANV 

except Super 

Low Models 

Twin Shocks Approval CCE 690829 690830 



07-17 V-Rod Twin Shocks Approval CCE 690826 690828 


FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


Fairing Mounted Air Pressure Gauge by 

Legend 

• Made from 6061 billet aluminum 

• Available with either a black or white face and chrome bezel 

• 0-300 PSI dial, fluid filled to prevent needle bounce 

• Quick-connect line fitting 

• Replaces air temperature gauge on most models 

697119 Black Face 

697127 White Face 

Air Suspension Parts 

642803 Norgren PNEUFIT C straight fitting G1/8 with 4 mm ø 

642804 Air pressure gauge 40 mm ø fitting G1/8 backside fitting 

(0-80 PSI/0-6 Bar) 


Chrome Handlebar Mount Switch Assembly by 

Legend 

• Optional 1" handlebar mounted switch assembly updates the 

blade style switch assembly that comes standard in Legend Air 

Suspension kits 

• Works with all Legend Air Suspension kits except the L2 and L8 

Softail systems 

697118 Handlebar mount Fits: Softail, Dyna, Sportster, V-Rod, 

Touring (except FLTR 15-) 

890051 Legend handlebar switch, all models including CVO FLTR 

15-17 (except Standard FLTR 15-17), chrome 

890052 Legend handlebar switch, for 15-16 FLTRUSE, 15-23 

FLTRXS, 16-19 FLTRU, 18-23 FLTRX, 18-19, 21-22 FLTRXSE, 

20-23 FLTRK, 22-23 FLTRXST, 22 FLTRKSE, 23 FLTRKSEANV 

890053 Legend handlebar switch, for 15-16 FLTRUSE, 15-23 

FLTRXS, 16-19 FLTRU, 18-23 FLTRX, 18-19, 21-22 FLTRXSE, 

20-23 FLTRK, 22-23 FLTRXST, 22 FLTRKSE, 23 FLTRKSEANV 

‘American Tuned’ Covered Gas Shocks with 

Approval by Progressive Suspension 

Progressive’s popular Model 412 with full-length covers, doublewall 

construction and 6-stage damping. Special cam adjusters 

permit easy preload adjustment, heat treated hard-chrome rods, 

long-life seals and fade-resistant oil. Upper and lower bushings 

are included. Sold in pairs. 

Note: When installing shorter-than-stock shocks, it is imperative that the fender-to-tire clearance 

is checked. 

Fit 4-Speed Big Twins from 58-86 

13.5"-long shocks fit 4-speed Big Twins from 58-72, and 12"-long 

shocks fit 4-speed Big Twin models with rear disc brake from 

73-86. 

28422 13.5" eye-to-eye 

28421 12.0" eye-to-eye 

28578 11.0" eye-to-eye 

Fit Dyna Glide Models from 91-17 


28457 11.0" eye-to-eye (standard-duty) 

29897 11.0" eye-to-eye (heavy-duty) 

28458 12.0" eye-to-eye (standard-duty) 

29899 12.0" eye-to-eye (heavy-duty) 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

422 Series Shocks for Softail Models with 

Remote Adjustable Preload by Progressive 

Suspension 

The Softail chassis has long been a challenge for suspension guys. 

The shocks are hidden under the frame which makes common 

adjustments difficult. Not anymore, the engineering team at 

Progressive Suspension has come up with a clever solution. They 

call It RAP or Remote Adjustable Preload and it combines there 

proven high performance shocks with a remote preload adjuster. 

Conveniently located behind the left passenger peg, the RAP 

system allows you quickly and easily tune your shocks to account 

for changing loads or the addition of a passenger. Available in 

chrome finish only. Sold in pairs. 

690182 Fits all models from 89-99 

690183 Fits all models from 00-17 

422 Heavy-Duty Adjustable Ride Height Shocks 

for Softail Models by Progressive Suspension 

Riding 2-up with stuffed saddlebags can quickly overwhelm 

your Softails suspension. Progressive has solved this problem by 

adding a higher rate spring to this already fully adjustable shock, 

providing better load and bottoming control. Combine that with 

variable ride height and tunable spring preload to setup your 

bike to fit your riding style. The 422 series shocks are based on 

a monotube damper system using and internal nitrogen charge, 

they are designed to eliminate oil cavitation and help create a 

consistent ride. Available in chrome finish only. Sold in pairs. 

690184 Fits all Softail 89-99 


Chrome HD Adjustable Ride Height Shocks for 

Softail Models by Progressive Suspension 

High performance shocks to replace the Original Equipment 

units on Softail models from 89-12. They feature adjustable 

mounts that permit the bike to be lowered up to two full inches 

from stock ride height. Improved compression and rebound 

damping give you greater control with less bottoming out and 

the spring preload is adjustable. Available in chrome finish only. 

Sold in pairs. 



LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



28425 

28403 


FX Model 

412 Series Twin Shock 

The 412s simple, durable design means they will be an improvement to your motorcycle‘s suspension performance for as long as you 

are riding it. 

• All Steel double wall damper with multistage velocity sensitive damping 

• 5-position cam style preload adjuster 

• High Pressure Gas Charged for consistant damping performance 

• Standard or Heavy-Duty progressive rate springs 

Certification: With Approval , Position: Rear , Qty.: 1 

FAMILY 

Dyna 

FL Shovel, 

FX Shovel, 

FX Model 

Sportster 

Sportster 

Sportster, 

FX Shovel, 

FX Model 

Sportster, 

FX Shovel, 

Sportster, 

Touring, FL 

Shovel, FX 

Shovel, FX 

Model 

Sportster, 

Touring, FL 

Shovel, FX 

Shovel, FX 

Model 

V-Rod 

FITMENT 

91-17 Dyna 

73-84 FL Shovel, 73-84 FX Shovel; Does not fit 82-84 FXR, 82-84 FXRS, 83-84 

FXRT, 84 FXRSDG, 85-86 FXWG and 80, 82-84 FLT, 81-84 FLTC 

LENGTH EYE-TO- 

EYE 

BLACK, HEAVY 

DUTY 

28429 

BLACK, 

STANDARD DUTY 

CHROME, HEAVY 

DUTY 

CHROME, 

STANDARD DUTY 

11“ 29901 29900 29896 28464 

12,5“ 29908 28494 

12“ 29905 29904 29898 28469 

11“ 28423 

12“ 28430 

11,5“ 682633 680236 682632 680237 

04-20 Sportster 

11“ 682640 680234 682639 680235 

13,5“ 28451 

52-78 Sportster; Does not fit 77-78 XLCR 

14,5“ 28434 

79-03 Sportster, 77-78 XLCR, 85-05 Touring, 85-94 FX Model, 80-84 FLT, 81-84 

FLTC, 82-84 FXR, 82-84 FXRS, 83-84 FXRT; Does not fit 82-86 FXWG and 96-03 11,5“ 28429 

XL1200S 

79-03 Sportster, 77-78 XLCR, 85-94 FX Model, 82-84 FXR, 82-84 FXRS, 83-84 

FXRT; Does not fit 82-86 FXWG and 96-03 XL1200S 

79-20 Sportster, 77-78 XLCR, 87-94 FX Model, 83-84 FXRT; Does not fit 82-86 

FXWG and 96-03 XL1200S 

79-03 Sportster, 77-78 XLCR, 85-05 Touring, 85-94 FX Model, 80-84 FLT, 81-84 

FLTC, 82-84 FXR, 82-84 FXRS, 83-84 FXRT; Does not fit 82-86 FXWG and 96-03 

XL1200S 

79-20 Sportster, 77-78 XLCH, 85-94 FX Model, 85-05 Touring, 82-84 FXR, 82- 

84 FXRS, 83-84 FXRT, 80-84 FLT, 81-84 FLTC; Does not fit 96-03 XL1200S and 

82-86 FXWG 

02-17 V-Rod 

11“ 28401 28403 

12,5“ 28427 28431 

13“ 28426 28432 

14,5“ 28428 28495 

13,5“ 28425 28433 

11,5“ 28439 

12,5“ 28571 28570 

12“ 28958 28956 28957 28955 

13“ 28573 28572 

13,5“ 28575 28574 

11,5“ 653874 

12“ 653875 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

444 Series Shocks 

by Progressive 

Suspension 

After more than a decade of 

ruling the roads with their 

road proven 440 Series shocks, 

they’ve unveiled another 

breakthrough design. Dubbed 

Frequency Sensing Technology 

(FST) for its unique ability to 

dynamically adjust damping as 

you ride. The result is superior 

performance no matter the 

road conditions. A top mount 

threaded preload adjuster 

allows for fine tuning with a 

simple twist of the cap. Limited 

lifetime warranty & made in 

the USA. 

FXD/FXDWG Dyna Models 

Standard Spring Shocks 


690132 12.5“ fits 91-17 

690146 11.5“ fits 91-17 

690130 12“ fits 91-17 

Black 

690131 12.5“ fits 91-17 

690129 12“ fits 91-17 

690145 11.5“ fits 91-17 

Touring Models Super Duty 

Spring Shocks for 85-23 

Touring, 80-84 FLT, 81-84 

FLTC 

897379 13" black 

897380 13.5" black 

944 Ultra Touring 

Series Shocks 

by Progressive 

Suspension 

Specifically designed to deliver 

a comfortable ride at a 1” 

lowered stance. Built around 

Progressives newest Frequency 

Sensing Technology (FST) 

allows the shocks to sense 

the frequency of a bump 

and automatically adjust 

dampening for a superior 

ride. The Ultra Touring Shocks 

utilize all the suspension travel 

provided by these 13” eye 

to eye units but provide a 1” 

lowered ride height with the 

use of a Progressive rate main 

spring specifically designed 

for Touring models. The 

unique Ultra Touring spring 

combination not only delivers 

a lowered ride height while 

it’s being ridden, but also 

while it’s on the kickstand. 

These shocks are High Pressure 

gas charged for consistent 

performance and come in a 

gloss black finish. 

690181 944 Ultra Touring 

Shocks heavy duty 

for 85-23 Touring, 80, 

82-84 FLT, 81-84 FLTC 

897381 944 Series Ultra 

Touring, 13" Super 

Duty Low, black for 

85-23 Touring, 80, 

82-84 FLT, 81-84 FLTC 

412 Cruise Series 

Shocks by Progressive 

Suspension 

The 412 Cruise is the perfect 

balance of lowered stance 

and ride quality. By combining 

a flat-wire spring with a 

progressive main spring the 

12.5” shock sits like 11.5” units 

under the weight of the bike, 

yet utilize the full stroke as 

terrain demands it. The result 

is a lowered shock that rides 

like a traditional height unit. 

• Five position preload 

adjuster 

• Gas charged damper 

• Fits 04-20 Sportster 

applications 

• Black or chrome main spring 

690246 412 Cruise shocks 

black 04-20 Sportster, 

except 08-10 XR1200, 

10-13 XR1200X 

690247 412 Cruise shocks 

chrome 04-20 

Sportster, except 

08-10 XR1200, 10-13 

XR1200X 

490 Sport Series 

Shocks 

• A true sport performance 

shock 

• High-pressure monotube 

with deflective disc damping 

technology 

• Hand threaded preload 

adjustment 

• Rebound adjustment to dial 

in 

• Linear rate spring allow for 

consistent feel 

893895 06-17 Dyna, 12.5”, 

black 

893896 06-17 Dyna, 13.5”, 

black 

893897 91-20 Sportster, 

12”except 08-10 

XR1200, 10-13 

XR1200X 

893898 91-20 Sportster, 13” 

except 08-10 XR1200, 

10-13 XR1200X 

893899 93-23 Touring, 12”, 

standard spring rate, 

black 

893900 93-23 Touring FL, 12”, 

heavy duty spring 

rate, black 

893901 93-23 Touring FL, 13”, 

standard spring rate, 

black 

893902 93-23 Touring FL, 13”, 

heavy duty spring 

rate, black 

893903 02-17 V-Rod, 12.5”, 

black 

893904 02-17 V-Rod, 13”, 

black 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



465 Series SGL Mono Shock for Softail 18-up 

Improved damping characteristics and spring rates result in 

increased suspension compliance. This allows the rear suspension 

to more effectively absorb road irregularities, such as bridge 

abutments and longitudinal pavement cracks without the 

harshness associated with the OE suspension. Chassis stability 

is also improved for a more confidence inspiring ride. The 5 

position rebound damping adjuster allows the rider to fine tune 

the shock for comfort and control. 

• Hard Anodized aluminum body 

• Anodized aluminum shock mounting eye’s with spherical 

bearings (OE is rubber bushing / needle bearing) 

• High pressure nitrogen, mono tube design 

• Threaded or R.A.P. (Remote Adjustable Preload) pre-load 

adjusters 

• Stock Length model-specific Rear Shock: 

• FLHC, FLHCS, FXFB: 13,1“ 

• FLFB, FLFBS, FLSL, FXBB, FXBR, FXBRS: 12,6“ 

Fitment: 18-23 Softail , Fitment Note: Model-specific rear shock stock length: FLHC, FLHCS, FXFB: 13,1“ and FLFB, FLFBS, 

FLSL, FXBB, FXBR, FXBRS: 12,6“ , Color: Black , Certification: With Approval , Position: Rear , Diameter: 45 mm, Unit: Each 

, Qty.: 1 

LENGTH EYE 

TO EYE 

DESCRIPTION 

WITHOUT RAP (REMOTE 

PRELOAD ADJUSTER) 

12,5“ Heavy Duty Spring 906749 906751 

12,5“ Standard Spring 906742 906746 

12“ Standard Spring 906743 906747 

13,5“ Standard Spring 906740 906744 

13“ Heavy Duty Spring 906748 906750 

13“ Standard Spring 906741 906745 

WITH RAP (REMOTE PRELOAD ADJUSTER) 

465 Series SGL Mono Shock for Indian FTR 


The 465 Series represents state of the art in high pressure gas 

monotube shock design. Utilizing a 46mm bore and deflective 

disc piston for precise damping. The beefy 16mm hard chrome 

shaft rides on custom Viton seals for low friction and leak free 

life. Threaded body and a 5-position rebound adjuster allows 

for fine tuning to match your riding style and load. The 465 is 

custom tuned for each application from the damping and spring 

rate all the way down to the jounce bumper. 

• High pressure gas charged Monotube 

• 5-Position rebound adjuster 

• Aluminum body and components 

• Threaded body for more precise sag adjustment 

Part#: 918207 , Fitment: 19-23 Indian FTR , Color: Black , 

Position: Rear , Diameter: 46 mm, Unit: Each , Qty.: 1 

990/970 Series Shock Remote Reservoir Top 

Mount Bracket Kit 

The Remote Reservoir Top Mount Bracket Kit allows you to 

mount the Progressive Suspension 990 Series or 970 Series Shocks 

with Remote Reservoirs on the top rear fender strut covers to 

give your bike that aggressive Performance Bagger look. 

• Aggressive Performance Bagger styling 

• Easy access to compression adjustment knobs 

• 2009-UP H-D Touring Models 

• Hardware included 

Part#: 919419 , Fitment: 09-23 Touring , Unit: Kit , Qty.: 1 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



STX 46 Mono Shock without Adjustable Lenght 

The STX 46 shock absorber for the 2018-up Harley-Davidson Softail gives an impressive increase in performance and comfort. 

Developed to make those long cruises more comfortable but also give the necessary support when hitting the winding roads. This 

STX 46 has some unique features such as a silver hydraulic preload adjuster, black spring, custom preload handle with laser etched Ö 

logo and CNC machined aluminum adjuster. 

• Type Code Key: 

• S: Single tube 

• 46: Piston diameter 46mm 

• D: Monotube high pressure gas type of shock absorber with internal reservoir in the main body 

• R1: Adjustable rebound damping on single tube shocks. Adjuster wheel above the end eye 

• S: Hose mounted hydraulic spring preload adjuster 

Description: Code: S46DR1S, Length: 320 mm, Stroke: 43,5 mm, Spring Rate N/mm: 105 N/mm, Mounted Spring: 21102- 

36 , Certification: With Approval , Position: Rear , Length eye to eye: 12,6“ (320mm) , Unit: Each , Qty.: 1 

PART# 

FITMENT 

925487 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FLFB, 18-20 FLFBS 114, 18 FLFBS 114 ANX, 18 FLFBS 114 ANV, 18- 

23 FLSB, 19-20 FXDRS 114, 21-23 FXLRS, 21-23 FLFBS, 21-22 FXBRS, 23 FLFBSANV 

925488 18-20 FLDE, 18-20 FXLR, 18-21 FLSL, 18-20 FXBB, 18-21 FLHC, 18 FLHCS 114, 18 FLHCS 114 ANV, 19-20 FLHC 114, 20-23 FXLRS, 

20-23 FXST, 21-23 FXBBS, 22-23 FLHCS, 23 FLHCSANV 





APPAREL 

S36 Twin Shock 

Long known for its iconic yellow and gold designs, Öhlins unveil the new ‘Blackline’ range of striking products for the V-Twin market. 

The Blackline is based on the S36 twin shocks. As with all Öhlins shock absorber these are specifically built and designed for each 

model in the Öhlins application list. The dampers are of emulsion or monotube design and available as piggyback version with or 

without length adjuster and two way adjustable. The shock absorber is developed and suitable as a great upgrade to bikes running 

twin dampers. The S36 Twin shock comes in different configurations depending on the bike model it was designed for. 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

S36D 

The S36D is a monotube 

high pressure gas type of 

shock absorber with internal 

reservoir in the main body. The 

Piston Diameter of this shock 

absorber is 36 mm. Adjustable 

spring preload. 

S36DR1L 

The S36DR1L is a monotube 


shock absorber with internal 

reservoir in the main body. The 



rebound damping (adjuster 

wheel is located above the 

end eye). The length of this 

shock absorber is adjustable. 

Adjustable spring preload. 

LIGHTING 

ELECTRICAL 

EXHAUST 

S36D 

S36DR1L 

INTAKE 

ENGINE 

S36E 

S36E 

The S36E is a emulsion type 

of shock absorber. The 



spring preload. 

S36PR1C1L 

S36PR1C1L 

The S36PR1C1L is a monotube 


shock absorber with external 

“piggy back” reservoir. The 




wheel is located above the end 

eye). Adjustable compression 

damping (adjuster is located 

on the reservoir). The length 

of this shock absorber is 

adjustable. Adjustable spring 

preload. 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

PART# MODEL YEAR TYPE LENGTH IN MM STROKE IN MM SPRING COLOR 

889354 

S36D 296 59 Black 

889355 S36PR1C1L 296 +10/-0 59 Black 

889356 00-20 Sportster, except 08- 

10 XR1200, 10-13 XR1200X 

S36DR1L 336 +10/-0 75 Black 

889357 S36E 338 97 Black 

889359 S36PR1C1L 336 +10/-0 96 Black 

889360 

91-17 S36D 305 68 Black 

889361 91-17 S36DR1L 305 +10/-0 66 Black 

889362 

FX Dyna models 

91-17 S36PR1C1L 305 +10/-0 68 Black 

910646 93-08 S36PR1C1L 336 +10/-0 89 Black 

889363 

S36D 305 74 Black 

889364 S36DR1L 329 +5/-5 75 Black 

889365 

90-23 Touring 

S36D 329 92 Black 

889366 S36DR1L 329 +10/-0 66 Black 

889367 VRSC V-Rod models 02-17 S36DR1L 325 +5/-5 68 Black 

990253 Indian Scout 15-23 S36D 293 Black 


FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


S36DR1 

Monotube high pressure gas 

type shock absorber with 

internal reservoir in the main 

body. Adjustable rebound 

damping (adjuster wheel is 

located above the end eye). 


S36PL 

Monotube high pressure 

gas type shock absorber 

with external “piggy back” 

reservoir. The length of this 



S36DR1L 



with internal reservoir in 

the main body. Adjustable 


wheel is located above the 

end eye). The length of this 



S36K 

Emulsion type shock absorber. 



S36E 

Emulsion type shock absorber. 


S36 PR1C1L 




reservoir. Adjustable rebound 



Adjustable compression 



of this shock absorber is also 

adjustable. 

S36PR1C1LB 




reservoir. Adjustable rebound 



Adjustable compression 



of this shock absorber is 

adjustable. Integrated 

hydraulic spring preload 

adjuster. 




APPAREL 

Öhlins History 

It all started with Kenth Öhlin, himself a fair motocross rider in the 60’s and 70’s, started modifying his own bikes and later helping 

other riders reach success. Already before Öhlins Racing AB was started in 1976 he was constructing exhaust pipes, engines and 

shock absorbers. Öhlins soon became synonymous with advanced suspension and in 1978 Öhlins shock absorbers were fitted for the 

first time on a world champion bike. Russian Gennady Moiseev who rode a KTM in the motocross 250cc class became the first world 

champion on Öhlins. More than 150 world titles would follow over the years with riders, drivers and teams winning titles with the 

help of Öhlins equipment. Öhlins quickly grew, adding road racing to the motocross industry and after that it was just a small step 

into the automotive segment with success in car racing and rally adding to the motorsport pedigree. Öhlins continued to grow and 

with the CES technology Öhlins also moved into the automotive industry supplying CES valves to road car suspension. In 1987 Öhlins 

was purchased by Yamaha and continued to grow in 20 years under Yamaha ownership but 20 years later Kenth Öhlin decided to buy 

back the company from Yamaha. Since 2007 the company is owned once again by Kenth Öhlin who is still active daily in the company. 

Today Öhlins covers a wide span of areas within advanced suspension technology from motorcycle to car and other vehicles, from 

OEM manufacturing to aftermarket and from all forms of motorsport to street and off-road products and customized products. 

S36 Twin Shock 

For bikes with twin dampers Öhlins developed the S36 twin shocks. As with all Öhlins shock absorbers these are specifically built and 

designed for each model in the Öhlins application list. The dampers are of emulsion or monotube design with or without length 

adjuster and two way adjustable. The Piston Diameter of this S36 Twin Shock absorber is 36 mm. The shock absorber is developed and 

suitable as a great upgrade to bikes running twin dampers. The S36 Twin shock comes in different configurations depending on the 

bike model it was designed for. 

PART# MODEL TYPE LENGTH IN 

MM 

STROKE 

IN MM 

SPRING COLOR 

655758 91-17 Dyna, except 12, 14-16 FLD, 13 FLD103 S36DR1L 325 +5/-5 67 black 

655816 91-17 Dyna, except 12, 14-16 FLD, 13 FLD103 S36DR1L 325 +5/-5 67 chrome 

655759 

S36E 330 84 black 

655761 

90-23 Touring, except 06 FLHXI, 07-14, 18-23 FLHX, 10, 

15-22 FLHXSE, 11 FLHXSE2, 12 FLHXSE3, 15-18, 20-21, 23 

S36DR1L 329 +5/-5 77 black 

655763 FLHXS, 18 FLHX ANV, 18 FLHXS ANX, 19 FLXHS, 22 FLHX , S36E 296 71 black 

22-23 FLHXST, 23 FLHXANV 

655764 S36E 296 71 yellow 

655766 06 FLHXI, 04-06 FLHRSI, 07-14, 18-23 FLHX, 07 FLHRS, 09 S36E 309,5 83 black 

655818 

FLTRSE3, 10, 15-21 FLHXSE, 11 FLHXSE2, 11, 15-16 FLTRUSE, 

12 FLHXSE3, 12, 18-19, 21-22 FLTRXSE, 13, 16-19 FLTRU, 

13 FLTRX, 13 FLTRXSE2, 13 FLTRXSE2 ANV, 15-18, 20-21, 

23 FLHXS, 15-19 FLHTKL, 15-23 FLTRXS, 18 FLHX ANV, 18 S36E 309,5 83 chrome 

FLHXS ANX, 19 FLXHS, 20-23 FLTRK, 22-23 FLHXST, 22 FLHX 

, 22-23 FLTRXST, 22 FLTRKSE, 23 FLHXANV, 23 FLTRKSEANV 

655768 

S36E 305 65 black 

655770 S36DR1 305 61 black 

655820 S36DR1 305 61 chrome 

655772 S36PR1C1LB 305 +10/-0 64 black 

655758 

All FX Dyna models, except FLD 12-16 

S36DR1L 325 +5/-5 67 black 

655816 S36DR1L 325 +5/-5 67 chrome 

655774 S36E 340 88 black 

655775 S36PR1C1LB 340 +5/-5 88 black 

655776 All VRSC V-Rod models 02-17 S36DR1L 318 +10/-0 67 black 

655783 

S36PL 336 +10/-0 98 black 

655784 S36DR1L 336 +10/-0 77 black 

655819 S36DR1L 336 +10/-0 77 chrome 

655785 S36PR1C1LB 336 +10/-0 95 yellow 

655821 00-20 Sportster, except 08-10 XR1200, 10-13 XR1200X S36PR1C1LB 336 +10/-0 95 chrome 

655786 S36E 360,5 105 black 

655822 S36E 360,5 105 chrome 

655788 S36PR1C1LB 360 +10/-0 101 yellow 

655824 S36PR1C1LB 360 +10/-0 101 chrome 

655789 all XR Sportster models, 17-20 XG 750A S36PL 360 +10/-0 97 black 

655791 all XR Sportster models 08-13 S36PR1C1L 415 +5/-5 98 yellow 

ÖHLINS shocks are no Stock Items and will be ordered on demand! Check with your sales rep for detailed informations. 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 




Slammer Plus Twin Shocks 

• High-pressure gas charged 11.5“ damper 

• Almost 2“ of travel 

• Ride height of 10.5“ 

• Available in chrome or black 

• Mounting hardware included 

Position: Rear , Length: 292.1 mm, Length eye to eye: 

11,5“ , Unit: Pair , Qty.: 1 

S46 for Indian Scout Models 

• Length 293 mm 

• Adjustable +6/-4 mm 

• Adjustable compression and rebound 

• Stroke 44 mm 

• Black Spring 

990151 S46HR1C1L fits 15-23 Scout, 16-20, 23 Scout Sixty 

FITMENT BLACK CHROME 

04-20 Sportster, except 08-10 XR1200, 915895 915894 

10-13 XR1200X 

80-84 FL Shovel, 85-23 Touring 915891 915890 

88-03 Sportster 915893 915892 

91-17 Dyna, except 99-03 FXDX, 01-03 

FXDXT, 04-05 FXDXI 

915897 915896 

693901 


Slammer Mono Shock for 

M8 Softail 

• 12.2” shock length 

• High pressure nitrogen charged damper 

• Internal floating piston (IFP) 

• Deflective disc valving 

• Preload adjustment via threaded preload adjuster with 

preload spanner wrench (included) 

Part#: 924989 , Fitment: 18-23 Softail , Fitment Note: 

Without preload adjustment knob , Color: Black , Length 

eye to eye: 12,2“ (310mm) , Unit: Each , Qty.: 1 

Burly Brand Slammer Shocks 

• Measures a stubby 10.5 in. eye-to-eye 

• Preload adjustable to tune to rider weight 

• Available in black or chrome 

• Made in the U.S.A. 

Fits Sportster Models 

693901 Chrome, Burly Slammer shocks for 88-03 XL models 

693902 Black, Burly Slammer shocks for 88-03 XL models 

693903 Chrome, Burly Slammer shocks for 04-20 Sportster, 

except 08-10 XR1200, 10-13 XR1200X 

693904 Black, Burly Slammer shocks for 04-20 Sportster, except 

08-10 XR1200, 10-13 XR1200X 

Fits Dyna Models 

693905 Chrome, Burly Slammer shocks for 91-17 Dyna, except 

99-03 FXDX, 01-03 FXDXT, 04-05 FXDXI 

693906 Black, Burly Slammer shocks for 91-17 Dyna, except 

99-03 FXDX, 01-03 FXDXT, 04-05 FXDXI 

Fits Touring Models 

693902 

688960 Chrome, Burly Slammer shocks for 85-23 Touring, except 

22-23 FLHXST, 22-23 FLTRXST, 80-84 FLT, 81-84 FLTC 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

HAND 

CONTROLS 

Stiletto Shocks by Burly for Sportster 

Burly Stiletto shocks are coil sprung sexiness. Created to give your Sportster the attitude and suspension travel that a proper café, 

Scrambler or post-apocalyptic XL wants and needs. The high performance damper is wrapped in a spring combination designed 

specifically to deal with subtle road noise and imperfections, while the main coil handles the big hits and controls bottoming. The 

result is a plush ride that’s not afraid to play rough. Fitment for most 86-03 XL models. 

690201 Stiletto 15” shocks for XL 86-03 

690206 Stiletto 13“ shocks for XL 86-03 

May require modification to exhaust brackets to open up clearance for belt.1 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Eco Line Twin Shocks 

• Piston 30mm 

• Shaft 12mm 

• Threaded Spring Preload 

• Note: Model-specific fitment refers to field of application stated in parts approval. 

Color: Black , Certification: With Approval , Unit: Pair , Qty.: 1 

FITMENT APPROVAL FITMENT TEXT LENGTH EYE TO EYE BLACK 

86-20 Sportster, except 08- 

10 XR1200, 10-13 XR1200X 

91-17 Dyna, except 99-03 

FXDX, 01-03 FXDXT, 04-05 

FXDXI 

The Approval Document is valid for the following Models: 02-03, 

05-09 XL883R, 00-03 XL1200S, 00-03 XL883H, 92-03 XLH883, 94-02 

XLH1200, 04-08 XL1200R 

The Approval Document is valid for the following Models: 99- 

03, 07, 10 FXD, 07-11 FXDC, 04-06 FXDI, 06 FXDBI, 06 FXDCI, 92-93 

FXD_DAY, 91-93 FXDB 

13“ (330mm) 924792 

11,8“ (300mm) 924805 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Eco Line Classic Series Twin Shocks 





Certification: With Approval , Unit: Pair , Qty.: 1 

FITMENT APPROVAL VALID FOR: DIM LENGTH 

EYE-TO-EYE 

91-17 Dyna, except 99-03 FXDX, 

01-03 FXDXT, 04-05 FXDXI, 74-79 

FL Shovel 

86-20 Sportster, except 08-10 

XR1200, 10-13 XR1200X 


XR1200, 10-13 XR1200X 


XR1200, 10-13 XR1200X 

98-17 Dyna, 85-94 FX Model, 95- 

03 FLHR, 96-97, 00-02, 04-06 FLHRI 

The Approval Document is valid for the following 

Models: 74-79 FLH, 06 FXD35 


Models: 90-93 FXRS_CON, 90-93 FXRSSP, 02-03, 05-09 

XL883R, 00-03 XL1200S, 92-03 XLH883, 08-10 XR1200, 

88-93 XLH1200 


Models: 02-03, 05-09 XL883R, 00-03 XL1200S, 00-03 

XL883H, 92-03 XLH883, 94-02 XLH1200, 04-08 XL1200R 


Models: 04, 07 XL53C, 05-06 XL(H)53C, 96-99, 05-09 

XL1200C, 08-09 XL883C, 92-03 XLH883, 00-03 XL883H 


Models: 95-03 FLHR, 96-97, 00-02, 04-06 FLHRI, 98-03 

FXD, 98 FXRS_CON, 99 FXRS_CONV, 99 FXDX, 01-03 

FXDXT, 04-06 FXDI, 87-89 FXLR 

BLACK 

12“ (305mm) 924806 

13,8“ (350mm) 924793 

13“ (330mm) 924795 

CHROME 

12,2“ (310mm) 924791 

13“ (330mm) 924807 

Top Line Twin Shocks 



15• Threaded spring preload 

• Rebound adjustable 

• Length adjustable 


Certification: With Approval , Unit: Pair , Qty.: 1 

FITMENT APPROVAL VALID FOR: DIM LENGTH EYE-TO-EYE BLACK BLACK EDITION 


XR1200, 10-13 XR1200X 

924798 924802 924804 

The Approval Document is valid 

for the following Models: 09-16 

XL883N, 10-16 XL1200X 

11,4“ (290mm) 924798 

91-17 Dyna The Approval Document is valid 

for the following Models: 95-03 

FXD, 04-05 FXDI 

11,8“ (300mm) 924802 924804 




APPAREL 

SEATS & 

TOURING 

FOOT 

CONTROLS 

Top Line Piggyback Twin Shocks 




• Rebound Adjustable 

• Compression Adjustable 

• Length Adjustable 


Part#: 924797 , Color: Black Edition , Certification: With Approval , Length eye to eye: 11,4“ (290mm) , Unit: Pair , 

Qty.: 1 

FITMENT APPROVAL VALID FOR: DIM LENGTH EYE-TO-EYE BLACK EDITION 

04-20 Sportster, except 08-10 XR1200, 

10-13 XR1200X 

The Approval Document is valid for the 

following Models: 09-16 XL883N, 10-16 

XL1200X 

11,4“ (290mm) 924797 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

Top Line Mono Shock 



• Hydraulic Spring Preload on Hose 

• Rebound Adjustable 

• Length Adjustable 


Color: Black , Certification: With Approval , Unit: Each , Qty.: 1 

FITMENT APPROVAL FITMENT DIM LENGTH EYE-TO-EYE BLACK 

18-23 Softail, except 19-20 FXDRS 114, 

18-20 FXBB, 20-23 FXLRS, 20-23 FXST, 

21-23 FXBBS, 22-23 FXLRST, 22 FXRST 

The Approval Document is valid for the 

following Models: 18-20 FLFB 

12,6“ (320mm) 924808 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

Bravo Twin Shocks 



• Step Spring Preload 


Color: Black , Certification: With Approval , Unit: Pair , Qty.: 1 

FITMENT APPROVAL VALID FOR: DIM LENGTH EYE-TO-EYE BLACK 

86-20 Sportster The Approval Document is valid for the 

following Models: 88-93 XLH883, 88-93 

XLH1200, 00-03 XL1200S 


13,8“ (350mm) 924794 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 


PM American Cycles Shock Blocker Cruiser 

Blocks the rear shock to avoid that the rear wheel touches the 

fender, when lowering kits or custom rear fenders are used. 

990079 Shock Blocker, steel black coated fits all Cruiser models 

09-15 

Shock Spring Compression Tool for Milwaukee 

Eight Models 

For easy disassembly of the shock absorber spring and 

installation of Kodlin M-8 Lowering Kits. 

Part#: 918355 , Fitment: 18-23 Softail , Unit: Each , Qty.: 1 

84808 


Custom Chrome Shock Absorbers 

Springs, adjustment cam covers and eyebolts and shock covers 

are chrome-plated. Long-wearing, hard-chromed piston shafts. 

Spring preload is adjustable using standard shock tools. Cams are 

heat-treated and lock into place with a double-lock retaining 

collar. Sold in pair. 

Fit all 4-Speed Big Twin Models from 73-86 (except FX 

Softail Models) 

28100 12.0" eye-to-eye without covers 

28101 12.0" eye-to-eye with covers 



Note: When installing shorter-than-stock shocks , it is imperative that the fender-to-tire clearance 

is checked. 

Fit all 4-Speed Big Twin Models from 58-72 



For 57-74 Sportster Models 


Lowering Kit for Twin Cam and Evolution 

Softail 

For all Harley-Davidson FXST/FLST models, also Breakout! With 

the Müller lowering device you get a casual look and optimal 

driving feel. Proven for decades by excellent fitting accuracy 

and best workmanship. Individually adjustable from 0-40mm. 

For show purposes, even lowering the Harley by up to 80mm is 

possible. A lowered motorcycle offers the advantage that even 

small people are safer on the road, since dangerous tipping of 

the motorcycle is prevented. In addition, the chassis is not too 

hard, so that even with lowering excellent driving comfort is 

guaranteed. 

• Stepless lowering 0 to 40mm below average ride height 

(80mm for show purposes) 

• Comes with bearing 

• Adjustable when installed - only on Twin Cam 

• Twin-Cam suspension can also be set up to 30mm higher than 

average ride height 

• With Approval 

Fitment Note: Assembly Requires Use Of Shock 

Compressing Tool. , Certification: With Approval , Position: 

Rear , Unit: Kit , Qty.: 1 

PART# 

FITMENT 

687086 00-17 Softail 

84808 89-99 Softail 

Reinforced Progressive Spring Kit for 89-17 

Softail Models by Eibach 

German precision-crafted replacement progressive springs from 

Eibach, one of the leading spring manufacturers in Europe and 

the USA. Available in three stages for demanding riders. Simple 

installation, just replace the OEM part with them. The heavyduty 

version with 1250-1400 lbs/inch rate provides an excellent 

ride for lowered bikes. The typical bottoming out when you ride 

with two persons or heavy luggage is history. Sold in pairs. 

687088 Heavy rate (1100-1250 lbs/inch) 

687089 Heavy-duty rate (1250-1400 lbs/inch)87 

Shock Pressing Tool 

• For all M8 Softail shocks 

• For Evolution Softail in conjunction with the Müller 

Motorcycles Conversion Disc (sold separately) 

• Secure tensioning of the shock 

• Quick installation of the lowering kit 


Part#: 917738 , Fitment: 18-23 Softail , Fitment Note: When 

using Conversion Kit 921856 also for EVO and TwinCam 

Softail Models , Unit: Each , Qty.: 1 




APPAREL 

SEATS & 

TOURING 

Conversion Disc for Shock-Pressing Tool 

With the Conversion Disc you can now easily clamp Evolution 

and Twin Cam lowerers into the Milwaukee Eight shock press. 

Part#: 921856 , Fitment: 84-17 Softail , Field of 

Application: For Müller Shock Lowering Kits , Description: 

Tool for Müller Shock Pressing Tool , Unit: Each , Qty.: 1 

FOOT 

CONTROLS 

HAND 

CONTROLS 

LIGHTING 

ELECTRICAL 



Lowering Kit for Softail Milwaukee Eight 

The Müller lowering kit for Milwaukee Eight models is the 

logical further development of our well-known lowering systems 

for EVO and Twin Cam. The conversion kit offers a stepless 

lowering of up to 40mm (for Fat Bob only max. 25mm). The 

height can be adjusted individually and also ensures excellent 

ride comfort. 

• Stepless lowering down to 40mm below average ride height 

on FXBR Models 

• Stepless lowering down to 40mm below average ride height 

on FXBB Models 

• Comes with new needle bearing 

• Shorten of the threads not necessary for mounting 

Fitment Note: Assembly Requires Use Of Shock 

Compressing Tool. , Certification: With Approval , Position: 

Rear , Unit: Kit , Qty.: 1 


911513 18-19, 23 FXBR, 18-20 FXBRS 114, 18 

FXBRS 114 ANX, 18 FLDE, 18-20 FLFB, 

18-20 FLFBS 114, 18 FLFBS 114 ANX, 

18 FLFBS 114 ANV, 18-20 FXFB, 18, 20 

FXFBS 114, 18-23 FLSB, 19 FXFB 114, 

19-20 FXDRS 114, 21-23 FLFBS, 21-23 

FXFBS, 21-22 FXBRS, 23 FLFBSANV 

911514 18-21 FLSL, 18-21 FLHC, 18 FLHCS 

114, 18 FLHCS 114 ANV, 18-20 FXLR, 

18-20 FXBB, 19-20 FLHC 114, 19-20 

FLDE, 20-23 FXLRS, 20-23 FXST, 21-23 

FXBBS, 21-23 FLHCS, 22-23 FXLRST, 22 

FXRST, 23 FLHCSANV 

MP1, Models 

with Remote 

Adjuster 

MP2, Models 

without 

Remote 

Adjuster 

Shock Lift Kit for Milwaukee Eight 

• 25mm (1“) lift kit for M8 Softail models from 2018 except 

FXDR, FXFB and FLHC 

• Easy construction 

• We recommend our Compression Tool - Shock Spring 

Compressor CCE#918355 

• No sending in the shock absorber 

• Including needle bearing 

• Without Approval 

Part#: 922052 , Fitment: 18-23 Softail, except 19-20 FXDRS 

114, 18-20 FXFB, 19 FXFB 114, 18-21 FLHC, 19-20 FLHC 114, 

18, 20 FXFBS 114, 20-23 FXLRS, 18 FLHCS 114, 18 FLHCS 114 

ANV, 21-23 FXFBS, 21-23 FLHCS, 22-23 FXLRST, 22 FXRST, 23 

FLHCSANV , Color: Black , Position: Rear , Unit: Each , Qty.: 

1 

Lowering Kit for Sportster S 

• Lowers the rear up to 25mm (1“) 

Part#: 922753, 21-23 Sportster S RH1250S , Fitment: 21- 

22 Sportster RH, 23 Sportster S RH1250S , Color: Black , 

Description: -25mm , Position: Rear , Unit: Each , Qty.: 1 

1“ Rear Lift Kit for Sportster S 

• 1“ or 25mm more ground clearance for your motorcycle 

• Easy construction 


Black , Unit: Each , Qty.: 1 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



Lowering Kit for Milwaukee Eight 

• Lowers the rear up to 40mm 

• No cutting of the shock absorber rod 

• Shock does not need to be send in 

• Includes needle bearing 

• inncludes detailed instructions to mount the kit 

• With Approval 

Color: Black , Certification: With Approval , Position: Rear , 


PART# FITMENT FITMENT NOTE 

918333 18-19, 23 FXBR, 18-20 FXBRS 114, 

18 FXBRS 114 ANX, 18-23 FLSB, 18- 

20 FLFBS 114, 18 FLFBS 114 ANX, 

18 FLFBS 114 ANV, 18-20 FXFB, 

18, 20 FXFBS 114, 19-20 FLFB, 19 

FXFB 114, 19-20 FXDRS 114, 21-23 

FLFBS, 21-23 FXFBS, 21-22 FXBRS, 

23 FLFBSANV 

918334 20-23 FXST, 18-21 FLSL, 18-20 FXLR, 

20-23 FXLRS, 18-20 FXBB, 18-21 

FLHC, 19-20 FLHC 114, 18 FLDE, 18 

FLHCS 114, 18 FLHCS 114 ANV, 21- 

23 FXBBS, 21-23 FLHCS, 22 FXRST, 

22-23 FXLRST, 23 FLHCSANV 

With Pre Load 

Adjuster. 

without Pre 

Load Adjuster 

Ness-Tech Lowering Kits for Softail Models 

Lowers the rear of Softail models up to two inches. Includes 

replacement shock studs, hardware and blue Loctite. 

05992 Fits all Softail models from 00-17 

‘Wild 1’ Adjustable Lowering Kit for Softail 

Models 

Adjustable spherical rod ends permit simple ride height control. 


921858 

921860 


Adjustable Lowering Kit for Twin Cam 88 

Softail Models by Wild 1 

Adjustable for ride height through a range of nearly 2-inches, 

this trick part from Wild 1 gets your bike lower! 


White Bros. ‘Adjust-A-Ride’ Kits for Softail 

Models 

Fully adjustable versions of the popular ‘Lowboy’ lowering 

kits which don’t require any cutting, grinding, or irreversible 

modifications and can be installed in an hour. Permits the ride 

height to be adjusted up to 2" lower or raised from the stock 

height by 1/2" in minutes with a 3/4" wrench. They feature 

sealed heim joint bearings that require very little maintenance. 

Fits all Softail Models from 00-17 

07895 Plain 

Rear Suspension Lift Kit 

• Includes ABE (part certificate) & mounting instructions 

• High quality material 

• Made in Germany, according to ISO 9001 


PART# FITMENT DESCRIPTION MATERIAL 

921862 18-23 Softail +25 mm Aluminium 

921858 21-23 Pan America +25 mm Steel 

921860 21-23 Sportster S 

RH1250S 

+35 mm Steel 




APPAREL 

SEATS & 

TOURING 

890799 921861 

FOOT 

CONTROLS 

HAND 

CONTROLS 

921863 

921859 

921930 

Rear Suspension Lowering Kit 

• Delivery includes ABE (part certificate) & mounting instructions 

• High quality material 

• Made in Germany, according to ISO 9001 



890799 00-17 Softail -35mm 

921861 18-23 Softail -25 mm 

921863 19-23 Indian FTR -35 mm 

921859 21-23 Sportster S RH1250S -35 mm 

921930 21-23 Pan America -40 mm 

Burly ‘Adjust-A-Ride’ Kits for Softail Models 

Fully adjustable versions of the popular ‘Lowboy’ lowering 

kits which don’t require any cutting, grinding, or irreversible 

modifications and can be installed in an hour. Permits the ride 

height to be adjusted up to 2" lower or raised from the stock 

height by 1/2" in minutes with a 3/4" wrench. They feature 

sealed heim joint bearings that require very little maintenance. 


Fit Original Equipment shocks only. 

28477 Plain 


Also fit the ‘American Tuned’ gas shocks from Progressive 

Suspension, Inc. 

28478 Plain 

LIGHTING 

ELECTRICAL 

EXHAUST 

INTAKE 

ENGINE 

GASKETS 

Shock Stud Kit for Big Twins 

Contains two lower shock stud kits and chrome nuts for the 

upper studs. The studs are grade 5 and zinc-plated with a locking 

agent applied to provide you with a secure installation. 

28176 Fits 4-speed Big Twins from 73-86 

Rubber Shock Bushings 

Rubber bushings for the shock mounting studs used from 58-72. 

28088 Replaces OEM 385210-42A (bag of 10) 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

+1“ Bagger Rear Suspension Lift Kit 

• CNC machined billet lift blocks 

• Raise the rear of your Touring model 

• Installs between the top of the rear shock and upper shock 

frame mount 

• Provides 1“ lift 

• Factory suspension geometry maintains 

• Kit includes two billet extension blocks and necessary 

mounting hardware 

• Works with factory and/or aftermarket suspension 

Part#: 925101 , Fitment: 09-23 Touring , Fitment Note: 

Does not work with a passenger backrest (will work with 

tour packs) , Color: Black , Material: Billet Aluminium , 


Shock Stud Lock Nuts 

Lock nuts for shocks on FL models from 58-84, FX models from 

71-86 and Sportster models from 54-78. Also used as the rear 

brake drum brake anchor nut on FL models from 63-72 and FX 

models from 71-72 (5/8"-18 threads). Replaces OEM 7993. Sold in 

10 pack. 

220042 Shock Stud Lock Nuts 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 





‘Burly’ Rear Lowering Kits 

Bolt-on shock mounts that move shock 

mounting points further back and 

down, lowering the rear of your bike 

approximately 1" with no loss of wheel 

travel. Installation is easy, with no 

permanent modifications to your bike. 

All kits come with a black powdercoated 

finish and include instructions and all 

necessary hardware. 

For Touring Models 

640374 Fits all models from 02-08 (except 

FLHX and FLHRS) 

641272 09-16 Touring, except 09-14 

FLHX, 10, 15-16 FLHXSE, 11 

FLHXSE2, 12 FLHXSE3, 15-16 

FLHXS 

For Sportster Models 

688962 Fits all 04 models (except Custom 

and Hugger models) 


Custom and Hugger models) 


Custom and Hugger models) 

Note: These lowering kits are not recommended to be 

installed on motorcycles equipped with lowered shocks. 

Lowering your motorcycle will reduce cornering clearance. 

This modification is intended for custom motorcycles. It is not 

recommended for motorcycles ridden on the streets or highways. 

All Burly lowering kits are made in the USA. 

Chrome Lowering Kit for Twin 

Cam Softail Models 

Adjustable mounts install on the Original 

Equipment and Progressive Suspension 

Softail shocks. Permits the bike to be 

lowered up to two full inches, improving 

the look by closing the gap between the 

tire and fender. Sold in pairs. 


Chrome Shock Stud Kits 

Kits include a chrome-plated stud, chrome 

washers, rubber bushings, spacer and 

chrome nuts. Sold each. 

Upper Shock Stud Kits 

28192 Fits 4-speed FL and FX models, 

73-86 (repl. OEM 54515-73) 

28179 Fits FL and FX models, 67-72 

(repl. OEM 54515-57) 

28195 Fits FL models, 58-66 (repl. OEM 

54515-58A) 

28193 Fits Sportster and K models, 

56-74 (repl. OEM 54515-56B) 

Lower Shock Stud Kits 


(repl. OEM 54517-67) 


54517-58) 

633876 Fits Sportster models, 75-78 


56-74 (repl. OEM 54516-72) 

Rear Lowering Kit for V-Rod 

• For all V-Rod models 02-17 

• Lower rear up to 35 mm 

• Fits perfect with the Racing rear fender 

890775 Rear lowering kit 

Rear Lowering Kit by Cult 

Werk 

CNC precision made aluminum lowering 

kit. Lowers depending on the mounting 

hole 30 mm or 50 mm. 

893759 04-20 Sportster, except 08-10 

XR1200, 10-13 XR1200X 

Note: Must be used in conjunction with 894122 which 

limits the travel of the shock! 

Rear Shock Limiter by Cult 

Werk 

Should be used in conjunction with 

893754 to limit the travel of the shock! 

894122 Fits Sportster, Dyna, V-Rod models 

28178 

28174 

28171 

28168 

28175 

Lower Shock Stud Kits 

Each kit includes a stud, chrome washers, 

rubber bushings, spacer and chrome nuts. 

Sold each. 


54517-58) 


(repl. OEM 54517-67) 

28175 Fits 4-speed FL and FX Big Twins, 

73-86 (repl. OEM 3958) 



56-74 (repl. OEM 54516-72) 

Chrome Washers (packs of 10) 

220081 1/2" hole (replaces OEM 54545- 

65) 

220082 5/8" hole (replaces OEM 54544- 

65)

APPAREL 

688554 

631421 

SEATS & 

TOURING 

28177 28170 

631420 

631423 

631424 

FOOT 

CONTROLS 

HAND 

CONTROLS 

28172 28173 

LIGHTING 

ELECTRICAL 

631427 

EXHAUST 

Upper Shock Stud Kits 

Includes a stud, chrome washers, rubber bushings, spacer and 

chrome nuts. Sold each. 

28177 Fits 4-speed FL models, 58-66 (repl. OEM 54515-58A) 

28170 Fits FL and FX models, 67-72 (repl. OEM 54515-57) 

28172 Fits 4-speed FL and FX models, 73-86 (repl. OEM 54515- 

73) 

28173 Fits 56-74 Sportster and K models (repl. OEM 54515-56B) 

688554 Fits 94-99 Sportster, models studs and washers only (repl. 

OEM 47384-94) 

Shock Stud Spacer 

Replacement upper shock stud spacer for Big Twin models from 

58-99 without rear guards. (repl. OEM 5960) 

220076 Pack of 10 

Progressive Suspension Gauge-Mounted Shock 

Absorber Pumps 

• Perfect OEM and aftermarket air shocks, forks, and emergency 

tire repair 

• Available in five styles making easy to service any low-pressure 

or high-pressure pneumatic systems 

• An exclusive let-down valve allows for precise adjustments 

• Check valve insures a no-leak operation 

680124 0-60 PSI pump 

680125 0-100 PSI pump 

680123 

Rear Lowering Kits by Custom Chrome 

Give your bike the low aggressive look you’ve always wanted 

and plant your feet safely on the ground. Sold in sets. 

• Simple easy installation with no modifications 

• Include hardware and instructions 

• Lowers the bike 1” to 1.5” depending on application 

• Kits for 02-13 Touring models will not work on models with 

OEM Leather bags 

631420 1” lowering kit for Dyna Glide models 06-17 

631421 1.5” lowering kit for Dyna Glide models 95-05 

631422 Adjustable lowering kit for Softail models 00-17 

631423 1” lowering kit for 05-20 Sportster, except 08-10 XR1200, 

10-13 XR1200X 

631424 1” lowering kit for Sportster models 00-04 

631422 

631427 Fits 02-23 Touring, except 02-06 FLHRCI, 04-06 FLHRSI, 

06 FLHXI, 07-18 FLHRC, 07 FLHRS, 07-14, 18-23 FLHX, 10, 

15-19, 22 FLHXSE, 11 FLHXSE2, 12 FLHXSE3, 15-18, 20-21, 

23 FLHXS, 18 FLHX ANV, 18 FLHXS ANX, 19 FLXHS, 22-23 

FLHXST, 22 FLHX , 22-23 FLHRXS, 22 FLHR, 23 FLHXANV 

Note: Lowering your motorcycle reduces cornering clearance. It is not recommended to use 

these kits with lowered shocks. Check all clearances after installing these kits. 

Progressive Suspension Shock Wrench 

Designed to adjust the spring preload on most factory-style 

shocks (including aftermarket). For all models (except Softail and 

Touring models) from 75-20 

20129 Sold each 

INTAKE 

ENGINE 

GASKETS 

TRANNY & 

CLUTCH 

DRIVELINE 

WHEELS, TIRES 

& BRAKES 

FRAMES 

FORKS & 

SHOCKS 

SHEETMETAL 

INSTRUMENTS 

& GAUGES 

LUBRICANTS & 

CHEMICALS 

TOOLS & 

EQUIPMENT 



894412 

220010 

Progressive Suspension Shock 

Spring Tool 

Standard shock spring tool to fit the 

Progressive Suspension shocks, most 

aftermarket and OEM standard steel 

spring shock absorbers. With this easy to 

use tool, you can eliminate the hassle of 

changing shock springs. 

84179 Sold each 

894413 

Upper Shock Bolt Cover 

• Aluminum 

• Black powder coated matte or gloss, 

hard chrome plated or raw 

• For XL 04-19 


894413 Chrome, 04-20 Sportster, except 

08-10 XR1200, 10-13 XR1200X 

894412 Raw, 04-20 Sportster, except 

08-10 XR1200, 10-13 XR1200X 

Chrome Upper Shock Covers 

for Sportster and FXR Models 

Chrome trim covers fit over the upper 

shock mount on Sportster and FXR models 

from 82-99. Sold in pairs. 


(replaces OEM 54712-94) 

220012 Fits Sportster models from 82-90 

and FXR models from 82-94 

(replaces OEM 54708-88A) 

Shock Adjusting Tool 

Fits Sportster models from 67-74, all 

Sportster and FXR models from 82-03, and 

all 4-speed FL and FX models from 58-86. 

20121 Replaces OEM 94700-52B 


Shock Mounting Kits for 

Softail Models 

Upgrade the hardware when you upgrade 

your shocks. Mounting kits for shocks 

includes four shoulder bolts and washers. 

Fits all Softail models 84-17 repl. OEMs 

4074, 6724). 

28396 Chrome (set of 4) 

28399 Cadmium-plated (set of 4) 

28398 Original Equipment bolt ONLY 

(sold each) 

Shock Stud Covers 

Chrome-plated stud covers for 4-speed Big 

Twin and Sportster models. Sold in pairs. 

26492 Fits 4-speed FL and FX models 

from late 70-84 and Sportster 

models 65-74 (repl. OEM 54704- 

65) 

26489 Fits Sportster models, 75-78 (repl. 

OEM 54704-75T) 

Chrome Shock Covers 

These top covers fit all 4-speed Big Twins 

(without saddlebag guards) with stock 

shocks from 58-84, and 52-78 Sportster 

and K models. Sold in pairs. 

26490 Replaces OEM 54707-84T 

Note: Stock replacements for 52-64 Sportster and K models 

as well as 58-64 FL models. All other applications are custom. 

Some seats may cause interference.

Section 15 Custom Chrome Europe Catalog 2024

Create successful ePaper yourself

Delete template?

Save as template?