Nimbus Compact M NET R32 Installation Manual UK
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Commissioning<br />
4 Curing Heating + Functional Heating (screed heating at<br />
a variable temperature from 25°C to the temperature defined<br />
by Par. 1.12.6 Floor drying Flow Set Point T, according<br />
to the period specified as an example in the chart for an<br />
18-day period, then at a fixed temperature of 25°C for a period<br />
of 3 days, then for a further 4 days at the temperature<br />
defined by Par. 1.12.6 Floor drying Flow Set Point T)<br />
1.17 EM DIAGNOSTICS - 2 INPUT<br />
1.18 EM DIAGNOSTICS - 1 OUTPUT<br />
Displays the values of the system’s board outputs.<br />
1.19 SERVICE<br />
1.19.0 SW Version main<br />
Temperature °C<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
0<br />
0 5 10 15 20 25 30<br />
Period (days)<br />
Fig. 89<br />
5 <strong>Manual</strong> (screed heating at the temperature set in Par.<br />
1.12.6 Floor drying Flow Set Point T)<br />
Press the selector to confirm.<br />
1.20 SYSTEM INTEGRATION<br />
1.20.0 PV offset DHW setpoint temperature<br />
Press the selector . Rotate the selector to set the desired<br />
value to increase the DHW set-point during integration from<br />
the photovoltaic system.<br />
Press the selector to confirm.<br />
1.20.2 Tank solar integration<br />
Activates integration of the solar heating system. In this case,<br />
the high sensor of the solar heating tank is used as a DHW tank<br />
sensor.<br />
Press the selector . Turn the selector to choose the desired<br />
item.<br />
0 Absent.<br />
1 Present.<br />
Press the selector to confirm.<br />
1.12.6 Floor drying Flow Set Point T<br />
Defines the set-point temperature of the heating delivery during<br />
the screed drying function (see Par. 1.12.5 Floor drying cycle).<br />
1.12.7 Floor drying total Remaining Days<br />
Defines the days remaining for the screed drying function.<br />
1.12.9 Exogel kit activation<br />
Enables integration of the anti-freeze kit.<br />
Press the selector . Turn the selector to choose the desired<br />
item.<br />
0 OFF.<br />
1 ON.<br />
Press the selector to confirm.<br />
1.14 ENERGY MANAGER STATISTICS<br />
Shows the duration of the system operation in hours.<br />
1.16 EM DIAGNOSTICS - 1 INPUT<br />
Displays the values of the system’s board inputs.<br />
1.20.3 OpenTherm gateway activation<br />
Activates the Opentherm gateway.<br />
Press the selector . Turn the selector to choose the desired<br />
item.<br />
0 OFF.<br />
1 ON.<br />
Press the selector to confirm.<br />
1.21 ERROR HISTORY<br />
1.21.0 Last 10 errors<br />
Displays the last 10 errors.<br />
1.21.1 Reset error list<br />
Press the selector . Turn the selector to choose the desired<br />
item.<br />
0 Do you really want to perform the reset ? If you press OK<br />
button, the reset command will be executed otherwise, by<br />
way of ESC, the previous page is shown..<br />
Press the selector to confirm.<br />
1.22 RESET MENU<br />
1.22.0 Reset factory settings<br />
Restores the default settings.<br />
Press the selector . Turn the selector to choose the desired<br />
item.<br />
0 Do you really want to perform the reset ? If you press OK<br />
button, the reset command will be executed otherwise, by<br />
way of ESC, the previous page is shown..<br />
Press the selector to confirm.<br />
56 / EN
Change language