Nimbus Compact M NET R32 Installation Manual UK
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Electrical connections<br />
– Position the Light Gateway (5) in the housing (4) and<br />
close the panel (3).<br />
– Pass the BUS cable (8) through the hole (9) on the electrical<br />
panel.<br />
3<br />
8<br />
9<br />
4 5<br />
Fig. 80<br />
Fig. 82<br />
– Detach the clips (2) and open the cover (3).<br />
– Connect the BUS cable (8) to the Light Gateway (5) respecting<br />
the polarity.<br />
– Connect the second BUS cable (10) which must be<br />
connected to the system interface.<br />
3<br />
5<br />
2<br />
10 8<br />
Fig. 81<br />
Fig. 83<br />
– Install the system interface onto the device (refer to the<br />
paragraph "On-board installation").<br />
44 / EN
Change language