Nimbus Compact M NET R32 Installation Manual UK

Electrical connections
– Pass the BUS cable (5) through the hole (6) on the electrical
panel.
– Open the flap (9) of the housing and insert the interface
(10).
10
5
6
9
Fig. 73
– Open the internal panel (7) to access the housing (8)
of the interface.
3
Fig. 75
– Close the flap (9).
– Once the interface has been installed on board, make
sure that the bus communication cable passes through
the hole (6) in the electrical panel, continues along the
panel (7) and is then connected to the terminal board
of the interface (11).
– Close the internal panel (7) and the front panel (2).
7
6
11
4
Fig. 74
Fig. 76
42 / EN