Nimbus Compact M NET R32 Installation Manual UK
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Electrical connections<br />
5.2 Indoor unit electrical connections<br />
a<br />
a<br />
Before carrying out any work on the system, shut<br />
off the power supply at the main switch.<br />
Comply with the neutral and phase connections.<br />
– To access the electrical panel of the indoor unit, loosen<br />
the closing screw (1) and open the main door.<br />
– Detach the clips (4) and open the cover (5).<br />
5<br />
4<br />
1<br />
Fig. 56<br />
– Loosen the screws (2).<br />
– Lift and slightly tilt the front panel (3) to remove it.<br />
Fig. 58<br />
– Pass the signal cables (6) through cable grommet (7).<br />
– Use the cable ties (8) to secure and the cables (6) and<br />
keep them bundled.<br />
2<br />
7<br />
6<br />
8<br />
8<br />
3<br />
i<br />
Fig. 59<br />
If necessary, cut a small hole in the cable hole<br />
to facilitate the insertion of cables. Avoid excessively<br />
large holes so as to prevent air from flowing<br />
inside the appliance.<br />
Fig. 57<br />
EN / 37