Nimbus Compact M NET R32 Installation Manual UK


Introduction
Dear Madam,
Dear Sir,
thank you for choosing the NIMBUS COMPACT UK M NET
R32 ARISTON system.
This manual was drawn up with the aim of informing you on
how to install, use and maintain the NIMBUS COMPACT UK M
NET R32 system, in order to enable you to optimally use all the
functions.
This installation manual along with the user manual should be
left with the product after installation for future reference.
Store this booklet, as it contains all the necessary information
regarding the product following its initial installation.
To find the nearest Technical Assistance Service and to consult
the multimedia copy of the documentation, you can connect
to the Internet website www.ariston.com.
Please also refer to the Warranty Certificate that you will find
inside the packaging, or which was handed to you by the installer.
Symbols used throughout this manual
and their meaning
i
a
Warranty
WARNING Indicates important information
and particularly delicate operations.
WARNING: DANGER Indicates actions that,
if not performed correctly, can lead to general
injuries or malfunctions or material damages
to the appliance; they therefore require
special attention and adequate training.
The ARISTON product is covered by a conventional warranty,
which takes effect from the date of purchase of the appliance.
For the warranty conditions, refer to the warranty certificate accompanying
the product.
Compliance
The CE marking applied to the appliance certifies that it conforms
with the essential requirements of the following European
Directives:
– 2014/30/EU (Electromagnetic Compatibility Directive)
– 2014/35/EU (Low Voltage Directive)
– RoHS 3 2015/863/EU on restrictions regarding the use
of certain hazardous substances in electrical and electronic
appliances (EN IEC 63000:2018)
– Regulation (EU) no. 813/2013 relative to ecodesign (no.
2014/C 207/02 - transitional methods of measurement
and calculation)
– 2014/68/EU (PED)
The UKCA marking applied to the appliance certifies that it
conforms with the essential requirements of the following
Regulations:
– Electrical Equipment (Safety) Regulations 2016 (S.I. 2016
No 1101, as amended)
– Ecodesign for Energy-Related Products and Energy
Information Regulations 2019 (S.I. 2019 No 539, as
amended)
– Pressure Equipment (Safety) Regulations SI 2016 no.
1105, as amended
– Electromagnetic Compatibility Regulations 2016 (S.I.
2016 No. 1091, as amended)
– The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations
2012 (S.I. 2012 No. 3031, as amended)
According to BS EN 12897:2016, the product complies with the
following requirements.
– The Building Regulations 2010 (S.I. 2010 No. 2214), as
amended
– The Water Supply (Water Fittings) Regulations 1999 (S.I.
1999 No. 1148), as amended
Disposal
PRODUCT CONFORMING TO:
– EU DIRECTIVE 2012/19/EU
– Italian Legislative Decree 49/2014
pursuant to Art. 26 of Legislative
Decree no. 49 of 14 March 2014,
“Implementation of Directive
2012/19/UE on waste of electrical
and electronic equipment (WEEE)”
– UK Waste Electrical and Electronic
Equipment Regulations 2013 S.I.
2013 No. 3113
The barred wheeled bin symbol appearing on the appliance or
on its packaging indicates that the product must be collected
separately from other waste at the end of its useful life.
The user must therefore deliver the decommissioned product
to an appropriate local facility for separate collection of electrotechnical
and electronic waste. Alternatively, the appliance to
be scrapped can be delivered to the dealer when purchasing a
new equivalent appliance.
Proper separated collection of the decommissioned appliance
for its subsequent recycling, treatment and eco-compatible
disposal helps to prevent negative effects on the environment
and human health, besides encouraging reuse and/or recycling
of its constituent materials.
2 / EN