Nimbus Compact M NET R32 Installation Manual UK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.2 Receiving the product<br />
The NIMBUS COMPACT <strong>UK</strong> M <strong>NET</strong> <strong>R32</strong> system is supplied in<br />
multiple items protected by a cardboard pack:<br />
1 outdoor unit<br />
2 indoor unit<br />
3 hydraulik kit <strong>UK</strong><br />
The following material is supplied in a plastic bag contained in<br />
the packaging:<br />
– Instruction manual<br />
– Warranty certificate<br />
– Energy label<br />
Remove the packaging taking care not to damage the appliance.<br />
i<br />
i<br />
i<br />
<strong>Installation</strong><br />
Upon receiving the product, make sure that its<br />
contents are intact and complete and, if they do<br />
not match the order, contact the branch that sold<br />
the appliance.<br />
IT IS FORBIDDEN to disperse the packaging material<br />
in the environment or leave it within reach<br />
of children, as it may be potentially dangerous.<br />
The appliance must be lifted following correct<br />
manual handling regulations and guidance.<br />
3.3 Installing the outdoor unit<br />
3.3.1 Place of installation<br />
1 Outdoor unit<br />
1 Packaging label<br />
2 Indoor unit<br />
1<br />
1 2<br />
Fig. 22<br />
– Install the outdoor unit outdoors only.<br />
– Avoid positioning the outdoor unit in places which are<br />
difficult to access for subsequent installation and maintenance<br />
operations.<br />
– Avoid positioning the unit in positions influenced by<br />
external heat sources.<br />
– Do not position the outdoor unit in places subject to<br />
continuous vibrations.<br />
– Do not position the outdoor unit on load-bearing structures<br />
that are not designed to withstand its weight.<br />
– Avoid positioning the appliance where combustible<br />
gas tanks or pipes are present.<br />
– Avoid positions exposed to oil vapours.<br />
– Choose a position where the noise and air emitted by<br />
the outdoor unit will not disturb the neighbours.<br />
– Choose a position not directly exposed to wind.<br />
– Respect all the prescribed installation distances.<br />
– Avoid positioning the appliance in a spot preventing<br />
access to doors and/or corridors.<br />
– The floor supporting the appliance must be able to sustain<br />
the outdoor unit’s weight and minimise all possible<br />
vibrations.<br />
– If the outdoor unit is installed in a location normally<br />
subject to heavy snowfall, it must be positioned at least<br />
200 mm above the usual level of snowfall, or else an<br />
adequate supporting structure must be mounted.<br />
1 Packaging label<br />
2 Packaging<br />
Fig. 23<br />
EN / 19
Change language