Kitchen worktops by Getalit - Kitchen Fit Sandiacre
Kitchen worktops by Getalit - Kitchen Fit Sandiacre
Kitchen worktops by Getalit - Kitchen Fit Sandiacre
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
68<br />
� GetaCore <strong>worktops</strong><br />
35 mm chipboard type P3 to DIN EN 312,<br />
faced with 3 mm GetaCore acrylic-bound<br />
solid surface material, wet sanded (P 600).<br />
Reverse side with 0.3 mm balancer, front<br />
edge 10 mm GetaCore with an elastic<br />
expansion joint between substrate and<br />
GetaCore edge. Moisture-resistant seal at<br />
GetaCore/balancer joint along front edge.<br />
Surface foil-protected.<br />
SYSTEMZUBEHÖR<br />
� Edges<br />
3 or 10 mm acrylic resin based solid sur-<br />
face material, surface wet sanded (P600),<br />
reverse dry sanded (P80). Concealed<br />
fixing <strong>by</strong> using GetaCore two-component<br />
adhesive.<br />
Surface foil-protected.<br />
� Worktop Cut-and-edge<br />
All worktop decors are also available<br />
as cut-and-lip. Benefit from this service,<br />
for example for sink/basin installation<br />
in same decor.<br />
� Wall Splashback Profiles<br />
10 mm acrylic-bound Solid Surface profile<br />
with rounded front edge, surface: wet<br />
sanded (P600), reverse dry sanded (P80).<br />
� Coved Profile<br />
Acrylic-bound Solid Surface material<br />
suitable to create a radiused edge<br />
between worktop and wallback panel<br />
or upstand. Wet sanded surface finish<br />
(P600), reverse dry sanded (P80).<br />
��������������������������������������������������� ����������������