Kitchen worktops by Getalit - Kitchen Fit Sandiacre
Kitchen worktops by Getalit - Kitchen Fit Sandiacre Kitchen worktops by Getalit - Kitchen Fit Sandiacre
34 protected with moisture-resistant paper foil. Moisture-resistant seal at joint along front edge. � AF 40/133 Hydro 38 mm moisture-resistant chipboard type P3 (hydrofuge) to DIN EN 312, face side and front edge faced with 0.7 mm GetaLit (HPL), front (and back) edge postformed – radius 4 mm, reverse side and rear edge protected with moisture-resistant paper foil. Moisture-resistant seal at joint along front edge. ACCESSORIES � PP-/Effect-Edges 1,5 / 2 mm decor matching PP-edges for an individual style of the worktop. protected with moisture-resistant paper foil. Moisture-resistant seal at joint along front edge. � AF 40/113 Hydro Bril 38 mm moisture-resistant chipboard type P3 (hydrofuge) to DIN EN 312 , face side and front edge faced with 0.8 mm GetaLit (HPL) in Brilliant Gloss finish, front edge postformed – radius 7 mm. Reverse side and rear edge protected with moisture- resistant paper foil. Moisture-resistant seal at joint along front edge. Surface foil-protected. � GetaLit Flex edges Two layer polyester based continuous laminate (colour co-ordinated). Type SB = Reverse with hot-melt adhesive (marking: red) Type G = Smooth reverse for hot-melt adhesive (marking: yellow) Reverse side and rear edge protected with moisture-resistant paper foil. Moisture- resistant seal at joint along front edge. Surface foil-protected. � Cut and edged worktops All worktop versions are also available as cut-and-edge. � GetaLit edges High-pressure decorative laminate edges according to DIN EN 438. ��������������������������������������������������� ����������������
matched sealing lips are fastened at the top profile, available with colour-fitted cap sets. � Caps for COMPACT system Matching caps for the COMPACT wall splashback profile system. � Fixing profile for GetaLit wall panelling systems Hard PVC moulding with coloured soft lip. sealing lips are fastened at the bottom profile, available with colour-fitted or decor-identic caps. � Caps for PLUS system Matching caps for the PLUS wall splash- back profile system. � Backpanel bead for GetaLit wall panelling Alu profile for a shapely frame of wall panelling. coloured soft lip to fix wall back panel and GetaLit Flex lateral edge (length 650 mm, width 44 mm). � Wallback Panel GetaLit Set Compound element made of chipboard type P2 to DIN EN 312, faced both sides with high-pressure laminate GetaLit (HPL). Reverse side to our option 13.4 mm and 13,6 mm respectively, including hard PVC moulding with coloured soft lip to fix the wall back panel and GetaLit Flex lateral edge (length 650 mm, width 44 mm). � Wallback Panel Standard GetaLit Compound element made of chipboard type P2 to DIN EN 312, substrate 12 mm, faced both sides with GetaLit (HPL). Re verse side to our option. Edges trimmed. ��������������������������������������������������� ���������������� 35 Worktops & accessories
- Page 1 and 2: BASIC RANGE 2011-2013
- Page 3 and 4: A B C D BASIC RANGE | SUMMARY UNI |
- Page 5 and 6: 30 Directly coated elements 34 Work
- Page 7 and 8: A great variety of products caterin
- Page 9 and 10: QUALITY PROPERTIES | HPL LAMINATES
- Page 11 and 12: | A 41 | | A 471 |* | A 14 | | P 11
- Page 13 and 14: | AH 923 | | AH 337 | | BBL 242 | |
- Page 15 and 16: | AN 340 | | Ei 757 | | BU 392 | |
- Page 17 and 18: A1 black A10 jet black A14 graphite
- Page 19 and 20: A623** claret red A683 orchid purpl
- Page 21 and 22: ME469 metal patina ME478 brushed st
- Page 23 and 24: H180 quartz anthracite H215 marble
- Page 25 and 26: AH337 flowery natur maple AH395 flo
- Page 27 and 28: EB308 plank oak mirror light EB730
- Page 29 and 30: NU742 nut tree butcherblock NU795 w
- Page 31 and 32: Decor Coordinate/Page UNI A1 black
- Page 33 and 34: lack p.9 A14* graphite A2 pure whit
- Page 35: pine light p.11 Pi230 pine white UL
- Page 39 and 40: + + +* PP4010/PP2155 Bril Bril Bril
- Page 41 and 42: + + LU258 C C C C C C LU258 taxusgr
- Page 43 and 44: + + C C C C C C C367 lichtgrau Stan
- Page 45 and 46: + + Bril Bril Bril Bril Bril Bril M
- Page 47 and 48: + + Cr Cr Cr Cr Cr Cr MK112 + + C C
- Page 49 and 50: + + SL843 C C C C C C SL843 zinngra
- Page 51 and 52: + + BBL467 PoF PoF PoF PoF PoF PoF
- Page 53 and 54: + + PoF PoF PoF PoF PoF PoF EiP791
- Page 55 and 56: + + Pi773 PoF PoF PoF PoF PoF PoF P
- Page 57 and 58: + Fb Fb Fb Fb Fb Fb METALLIC + PoF
- Page 59 and 60: � Alu ventilation grill Alu venti
- Page 61 and 62: Decor Co-ordinate/page UNI A223 whi
- Page 63 and 64: A402 bright grey A8 p.9 STONE - len
- Page 65 and 66: uni white p.8 A227 light beige A340
- Page 67 and 68: ket not only by the batch-free prod
- Page 69 and 70: | GC 3434 | | GC 2968 | | GC 3391 |
- Page 71 and 72: � GC-RU-370 Interior size: 370 x
- Page 73 and 74: + + + + schwarz SM SM SM + weiß tr
- Page 75 and 76: + + + + titanweiß SM SM SM + SM SM
- Page 77 and 78: SM SM SM + SM SM rotbraun + + + + d
- Page 79 and 80: using the same GetaCore cartridge m
- Page 81 and 82: or basin forms hardening, to fill s
- Page 83 and 84: QUALITY PROPERTIES | POLYMER GLASS
- Page 85 and 86: Decor Co-ordinate/page UNI GSD200 l
matched sealing lips are fastened at the<br />
top profile, available with colour-fitted<br />
cap sets.<br />
� Caps for COMPACT system<br />
Matching caps for the COMPACT wall<br />
splashback profile system.<br />
� Fixing profile for GetaLit wall<br />
panelling systems<br />
Hard PVC moulding with coloured soft lip.<br />
sealing lips are fastened at the bottom<br />
profile, available with colour-fitted or<br />
decor-identic caps.<br />
� Caps for PLUS system<br />
Matching caps for the PLUS wall splash-<br />
back profile system.<br />
� Backpanel bead for GetaLit wall<br />
panelling<br />
Alu profile for a shapely frame of wall<br />
panelling.<br />
coloured soft lip to fix wall back panel<br />
and GetaLit Flex lateral edge (length<br />
650 mm, width 44 mm).<br />
� Wallback Panel GetaLit Set<br />
Compound element made of chipboard<br />
type P2 to DIN EN 312, faced both sides<br />
with high-pressure laminate GetaLit (HPL).<br />
Reverse side to our option 13.4 mm and<br />
13,6 mm respectively, including hard PVC<br />
moulding with coloured soft lip to fix the<br />
wall back panel and GetaLit Flex lateral<br />
edge (length 650 mm, width 44 mm).<br />
� Wallback Panel Standard GetaLit<br />
Compound element made of chipboard<br />
type P2 to DIN EN 312, substrate 12<br />
mm, faced both sides with GetaLit (HPL).<br />
Re verse side to our option. Edges trimmed.<br />
��������������������������������������������������� ����������������<br />
35<br />
Worktops &<br />
accessories