15.01.2024 Views

CompTIA A+ Certification All-in-One Exam Guide

  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Figure 11-28 Setting up PXE in system setup

NOTE Most, but not all, NICs support PXE. To boot from a network

location without PXE, you can create boot media that forces your PC to boot

from a mapped network location.

When you reboot the PC, you’ll see the familiar first screens of the boot

process. At some point, you should also see an instruction to “Press f12 for

network boot.” (It’s almost always f12.) The PC will attempt to find a server

on the network to which it can connect. When it does, you’ll be asked to

press f12 again to continue booting from the network, as you can see in

Figure 11-29.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!