15.01.2024 Views

CompTIA A+ Certification All-in-One Exam Guide

  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

device, it may be tempting to hold it in a way that leaves some part of

your hand or arm too close to the edge of the screen; some devices will

register this as a touch.

• Your device may have touchscreen diagnostics available through

hardware troubleshooting menus accessible through the BIOS. Refer to

the manufacturer’s resources for how to access these diagnostics. If

available, they are a quick way to identify whether you’re looking at a

hardware or software/configuration issue. The Mouse applet in the

Control Panel or Settings enables you to calibrate or reset your touch

support. macOS has a Trackpad applet in System Preferences. Attempt

to reset and recalibrate the display.

EXAM TIP The troubleshooting issue known as a ghost cursor can mean

one of two things. First, the display shows a trail of ghost cursors behind your

real cursor as you move it. This might point to an aging display or an

improperly configured refresh rate. Second, the cursor moves erratically or

drifts slowly in a steady direction (also known as pointer drift), whether you

are touching the touchpad or not. If a reboot doesn’t fix the pointer drift, the

touchpad has probably been damaged in some way and needs to be replaced.

Chapter Review

Questions

1. Which of the following are good ideas when it comes to batteries?

(Select two.)

A. Keep the contacts clean by using alcohol and a soft cloth.

B. Store them in the freezer if they will not be used for a long period

of time.

C. Toss them in the garbage when they wear out.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!