15.01.2024 Views

CompTIA A+ Certification All-in-One Exam Guide

  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

By default, all computers on the network are assigned to a workgroup

called WORKGROUP. You can see your workgroup name by opening the

System applet in Control Panel, as shown in Figure 19-24.

Figure 19-24 Default workgroup

There’s nothing special about the name WORKGROUP, except that every

computer on the network needs the same workgroup name to be able to share

resources. If you want to change your workgroup name, you need to use the

System applet. In the Computer name, domain, and workgroup settings

section on the right, click the Change settings link to open the System

Properties dialog box. Then click the Change button to change your

workgroup name (see Figure 19-25).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!