15.01.2024 Views

CompTIA A+ Certification All-in-One Exam Guide

  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

reg prompt. From there, you have numerous commands to deal with the

Registry. The simplest is probably the copy command. You know the location

of the backed-up Registry files. Just copy the files to the location of the main

Registry files—up one level in the tree under the \config folder.

Advanced Startup Options

If Windows fails to start up normally, you have a couple of options

depending on the version of the OS. In Windows 7, press f5 at boot-up to

boot directly to Safe Mode. Or, you can use the Windows Advanced Boot

Options/Advanced Startup Options menu to discover the cause. To get to this

menu, restart the computer and press f8 after the POST messages but before

the Windows logo screen appears.

In Windows 8 and later, you can get to the Advanced Startup Options by

hard rebooting the computer each time it hangs or starts to load Windows.

Windows will eventually figure out that it has a problem and will run a

diagnostic. If the computer fails the test, you’ll be offered Advanced options.

Check here for the steps and screenshots from Microsoft:

https://support.microsoft.com/en-us/help/12376/windows-10-start-yourpc-in-safe-mode

Safe Mode

Safe Mode starts up Windows but loads only very basic, non-vendor-specific

drivers for mouse, 800 × 600 (7) or 1024 × 768 (8/8.1/10) resolution monitor,

keyboard, mass storage, and system services (see Figure 16-26).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!