environmental impact statement kilmainhamwood compost facility ...
environmental impact statement kilmainhamwood compost facility ... environmental impact statement kilmainhamwood compost facility ...
5361- Kilmainhamwood Compost Facility Extension- EIS 9.1.3.2 Potential Operational Impacts Previous dust monitoring on site (results provided in Table 9.2) clearly illustrates that dust is currently not a nuisance issue on site. All current waste processing takes place indoors within enclosed buildings which is maintained under negative pressure thereby reducing dust emissions arising at the facility. Similarly, all future waste processing will take place indoors within enclosed buildings, therefore dust emissions from the facility are not expected to be a nuisance issue for the proposed development. A potential source of dust is from the site road. This road will be wetted down during dry weather conditions to prevent the generation of dust. 9.1.4 Mitigation Measures Thorntons Recycling will endeavour to ensure that dust emissions are kept to a minimum at all locations and shall take all reasonable steps to minimise dust emissions. Currently a road sweeper is available, when required, to further reduce dust emissions from the yard and site road. In summary the following mitigation measures are proposed: • All composting and materials handling activities will continue to be carried out indoors; • A road sweeper will continue to be used on site when required; • Access routes will be regularly inspected and cleaned when necessary; • The site road and all hardstanding areas will be sprayed with water in periods of dry weather to help suppress dust emissions; It is anticipated that with the implementation of the above mitigation measures, dust emissions will continue to be in compliance at all dust monitoring locations when measured using the TA Luft/VDI 2119/Bergerhoff Method. For inspection purposes only. Consent of copyright owner required for any other use. 109 EPA Export 01-06-2010:03:55:56
5361- Kilmainhamwood Compost Facility Extension- EIS 9.2 ODOUR 9.2.1 Introduction Odour Monitoring Ireland were commissioned to perform an odour assessment and dispersion modelling impact assessment of the existing facility design and the proposed facility design (existing facility and proposed extension including upgrading of odour abatement system) located in Kilmainhamwood, Nobber, Co. Meath (Figure 9.2). An odour impact assessment of the existing and proposed composting facility design was performed in order to determine the potential risks of odour on the surrounding air quality. The existing composting facility is fully enclosed and the only scheduled emission(s) occur from the odour control system exhaust points. Odour sampling and measurement in accordance with the EN13725:2003 was performed on the exhaust of each biofilter system 1 and 2. For the existing facility impact, the gathered odour emission data including source characteristics was utilised in conjunction with dispersion-modelling techniques (i.e. AERMOD Prime 07026) to assess any odour impact on the surrounding area in accordance with established odour impact criterion. For the proposed upgrade facility design, the improved odour treatment design was utilised in conjunction with guaranteed odour emission data to ascertain the potential level of odour impact on the surrounding population in the vicinity of the facility. All odour dispersion modelling was performed in accordance with the recommendations contained within the Irish and UK EPA guidance documents “Odour impacts and odour emission control measures for intensive agriculture”, EPA, 2001 and H Horizontal Guidance notes Parts 1 and 2, UK Environment Agency. AERMOD Prime was used to perform dispersion modelling assessment due to the significant probability of on site building wake effects (i.e. large buildings and low emission points). AERMOD Prime is the model mechanism preferred by the Environmental Agency and USEPA. Five years of consecutive meteorological data (Clones 2002 to Clones 2006 inclusive) was used within the dispersion modelling assessment to provide statistically significant prediction over 5 years. For inspection purposes only. Consent of copyright owner required for any other use. This report will describe the methodologies used to ascertain the existing levels of odours at the facility and provide information on the proposed odour treatment design for the new facility. 110 EPA Export 01-06-2010:03:55:56
- Page 71 and 72: 5361- Kilmainhamwood Compost Facili
- Page 73 and 74: 5361- Kilmainhamwood Compost Facili
- Page 75 and 76: 5361- Kilmainhamwood Compost Facili
- Page 77 and 78: 5361- Kilmainhamwood Compost Facili
- Page 79 and 80: 5361- Kilmainhamwood Compost Facili
- Page 81 and 82: 5361- Kilmainhamwood Compost Facili
- Page 83 and 84: 5361- Kilmainhamwood Compost Facili
- Page 85 and 86: 5361- Kilmainhamwood Compost Facili
- Page 87 and 88: 5361- Kilmainhamwood Compost Facili
- Page 89 and 90: 5361- Kilmainhamwood Compost Facili
- Page 91 and 92: 5361- Kilmainhamwood Compost Facili
- Page 93 and 94: W SW NW D ECL AN C UN N IN GH A M 2
- Page 95 and 96: 5361- Kilmainhamwood Compost Facili
- Page 97 and 98: 5361- Kilmainhamwood Compost Facili
- Page 99 and 100: 5361- Kilmainhamwood Compost Facili
- Page 101 and 102: 5361- Kilmainhamwood Compost Facili
- Page 103 and 104: 5361- Kilmainhamwood Compost Facili
- Page 105 and 106: 5361- Kilmainhamwood Compost Facili
- Page 107 and 108: 5361- Kilmainhamwood Compost Facili
- Page 109 and 110: 5361- Kilmainhamwood Compost Facili
- Page 111 and 112: W SW NW D ECL AN C UN N IN GH A M 2
- Page 113 and 114: 5361- Kilmainhamwood Compost Facili
- Page 115 and 116: 5361- Kilmainhamwood Compost Facili
- Page 117 and 118: 5361- Kilmainhamwood Compost Facili
- Page 119 and 120: 5361- Kilmainhamwood Compost Facili
- Page 121: 5361- Kilmainhamwood Compost Facili
- Page 125 and 126: 5361- Kilmainhamwood Compost Facili
- Page 127 and 128: 5361- Kilmainhamwood Compost Facili
- Page 129 and 130: 5361- Kilmainhamwood Compost Facili
- Page 131 and 132: 5361- Kilmainhamwood Compost Facili
- Page 133 and 134: 5361- Kilmainhamwood Compost Facili
- Page 135 and 136: 5361- Kilmainhamwood Compost Facili
- Page 137 and 138: 5361- Kilmainhamwood Compost Facili
- Page 139 and 140: 5361- Kilmainhamwood Compost Facili
- Page 141 and 142: 5361- Kilmainhamwood Compost Facili
- Page 143 and 144: 5361- Kilmainhamwood Compost Facili
- Page 145 and 146: 5361- Kilmainhamwood Compost Facili
- Page 147 and 148: 5361- Kilmainhamwood Compost Facili
- Page 149 and 150: 5361- Kilmainhamwood Compost Facili
- Page 151 and 152: 5361- Kilmainhamwood Compost Facili
- Page 153 and 154: 5361- Kilmainhamwood Compost Facili
- Page 155 and 156: 5361- Kilmainhamwood Compost Facili
- Page 157 and 158: 5361- Kilmainhamwood Compost Facili
- Page 159 and 160: 5361- Kilmainhamwood Compost Facili
- Page 161 and 162: 5361- Kilmainhamwood Compost Facili
- Page 163 and 164: 5361- Kilmainhamwood Compost Facili
- Page 165 and 166: 5361- Kilmainhamwood Compost Facili
- Page 167 and 168: 5361- Kilmainhamwood Compost Facili
- Page 169 and 170: 5361- Kilmainhamwood Compost Facili
- Page 171 and 172: 5361- Kilmainhamwood Compost Facili
5361- Kilmainhamwood Compost Facility Extension- EIS<br />
9.2 ODOUR<br />
9.2.1 Introduction<br />
Odour Monitoring Ireland were commissioned to perform an odour assessment and dispersion<br />
modelling <strong>impact</strong> assessment of the existing <strong>facility</strong> design and the proposed <strong>facility</strong> design (existing<br />
<strong>facility</strong> and proposed extension including upgrading of odour abatement system) located in<br />
Kilmainhamwood, Nobber, Co. Meath (Figure 9.2). An odour <strong>impact</strong> assessment of the existing and<br />
proposed <strong>compost</strong>ing <strong>facility</strong> design was performed in order to determine the potential risks of odour on<br />
the surrounding air quality. The existing <strong>compost</strong>ing <strong>facility</strong> is fully enclosed and the only scheduled<br />
emission(s) occur from the odour control system exhaust points. Odour sampling and measurement in<br />
accordance with the EN13725:2003 was performed on the exhaust of each biofilter system 1 and 2.<br />
For the existing <strong>facility</strong> <strong>impact</strong>, the gathered odour emission data including source characteristics was<br />
utilised in conjunction with dispersion-modelling techniques (i.e. AERMOD Prime 07026) to assess any<br />
odour <strong>impact</strong> on the surrounding area in accordance with established odour <strong>impact</strong> criterion. For the<br />
proposed upgrade <strong>facility</strong> design, the improved odour treatment design was utilised in conjunction with<br />
guaranteed odour emission data to ascertain the potential level of odour <strong>impact</strong> on the surrounding<br />
population in the vicinity of the <strong>facility</strong>. All odour dispersion modelling was performed in accordance with<br />
the recommendations contained within the Irish and UK EPA guidance documents “Odour <strong>impact</strong>s and<br />
odour emission control measures for intensive agriculture”, EPA, 2001 and H Horizontal Guidance<br />
notes Parts 1 and 2, UK Environment Agency. AERMOD Prime was used to perform dispersion<br />
modelling assessment due to the significant probability of on site building wake effects (i.e. large<br />
buildings and low emission points). AERMOD Prime is the model mechanism preferred by the<br />
Environmental Agency and USEPA. Five years of consecutive meteorological data (Clones 2002 to<br />
Clones 2006 inclusive) was used within the dispersion modelling assessment to provide statistically<br />
significant prediction over 5 years.<br />
For inspection purposes only.<br />
Consent of copyright owner required for any other use.<br />
This report will describe the methodologies used to ascertain the existing levels of odours at the <strong>facility</strong><br />
and provide information on the proposed odour treatment design for the new <strong>facility</strong>.<br />
110<br />
EPA Export 01-06-2010:03:55:56