IEC 2023 Guide
STUDENT SYMPOSIUM STUDENT SYMPOSIUM • OCTOBER 17-19, 2023 The Student Symposium includes oral presentations by graduate and undergraduate students, as well as a poster session. Technical Meeting attendees are encouraged to view the student presentations. The posters are displayed on the Expo floor and in the Technical Meeting area so all IEC attendees can view them. STUDENT PRESENTATIONS Each presentation will take place in the relevant session topic during the Technical Meeting. October 17 • Traceless Crosslinking of Polyisobutylene - Arsalaan Pathan, The University of Akron • Durability Variation and Composition of Medical Gloves - Ashley Herkins, The Ohio State University • The Influence of Temperature on Friction and Wear Performance of Tire Tread Compounds Using a Novel Friction-Wear Rig - Eathan Plaschka, Queen Mary University of London October 18 • Chain Shuffling: A Synthetic Pathway to Multiblock Copolymers - Abhishek Banerjee, The University of Akron • Fiber-reinforced Silicone Pneumatic System with Haptic Feedback for Teleoperation - Nathalia Diaz Armas, University of Massachusetts Lowell • Direct-Ink Write of Rubber Formulations for Automotive Applications - Sarath Kamath, The University of Akron • Investigation of Filler Interaction and Degradation of Disulfide Elastomers Made by Reversible Radical Recombination Polymerization (R3P) - Aswathy Pillai, The Ohio State University • Closing the Loop for Silica-filled Passenger Car Tire Rubber - Rounak Ghosh, University of Twente • Influence of Silica and Silane on the Cure Behavior in Filled SSBR Compounds - Anmol Aggarwal, University of Twente • Enhanced Thermal Performance Properties of EPDM Carbon Black Composites via Crossover Curing Ingredients - Arshad Rahman Parathodika, Indian Institute of Technology Kharagpur • Rubber Dandelion: A Source of Natural Rubber Latex - Nathaniel King-Smith, The Ohio State University • Investigating the Effects of Thermal History on Interlayer Adhesion in Thermoset 3D Printing by Atomic Force Microscopy (AFM) - AA Mubasshir, University of Massachusetts Lowell • Evaluating the Combined Effects of Swelling and Elevated Temperatures in Elastomer Composites - Aaron M. Duncan, Queen Mary University of London • Investigating the Effects of Graphene Nanoplatelets (GNPs) and External Waterbased Crosslinker (eWCL) on the Mechanical and Thermal Properties of Waterbased Elastomer (WBE) Nanocomposites - Christian Nwosu, The University of Manchester October 19 • Characterization of Dielectric Elastomer Actuators Based on Functionalized Liquid Isoprene Rubber for Soft Robotics Applications - Jishnu Nirmala Suresh, Leibniz- Institut für Polymerforschung Dresden • Understanding the Role of Temperature-dependent Bound Rubber on the Viscoelastic Properties of Filled Elastomer Composites - Kirsty Rutherford, Queen Mary University of London • Investigating Origin of Temperature Dependence of Rubber Rupture - Zehao Fan, The University of Akron • Understanding the Role of Silica Hybrid Particles with Styrene-butadiene Rubber Shells on Tread Compound Properties - Marcin Sek, University of Twente • Vulcanization of an IR/BR-copolymer Using a CO2-laser as Inline-curing Method for Additive Manufacturing of Rubber-based Parts - Sebastian Leineweber, Leibniz Universität Hannover Institut für Transport- und Automatisierungstechnik • Physical Characterization of SuMo Fly Ash Compounds - Eric Devney, The Ohio State University • Minimizing Temperature Deviations in Rubber Extrusion Lines Using Artificial Neural Network based Process Control - Marco Lukas, Leibniz Universität Hannover Cancarb is the leader in the SPONSORED BY development, manufacturing, and global distribution of medium thermal carbon black. From our plant in Medicine Hat, Alberta, Canada, our Thermax® brand carbon blacks are available globally and offer solutions to the rubber industry. Now with 6 production units, Cancarb brings experience and dependability to customers throughout the world who depend on thermal carbon black production from clean natural gas with a constant focus on quality, sustainability, and reliability. From continual yield improvement initiatives to reduce, reuse & recycle programs, we are acting every day to ensure a clean and healthy planet for future generations. 58 INTERNATIONAL ELASTOMER CONFERENCE
STUDENT SYMPOSIUM • OCTOBER 17-19, 2023 STUDENT POSTERS Students will be at their posters on the Expo floor on Tuesday, October 17, 2:30 p.m. – 3:30 p.m. and on the Ballroom Level outside Technical Meeting rooms 25-26 on Wednesday, October 18, 2:30 p.m. – 3:30 p.m. • Self-healable and Super-Stretchable Conductive Elastomeric Nanocomposites for Efficient Thermal Management Characteristics and Electromagnetic Interference Shielding - Palash Das, IIT Kharagpur • Preferential Localization of Conductive Filler in Ethyleneco-Methyl Acrylate/Thermoplastic Polyolefin Polymer Blends to Reduce Percolation Threshold and Enhanced Electromagnetic Radiation Shielding over K Band Region - Ankur Katheria, IIT Kharagpur • Engineering of ß-hydroxyl esters, Disulfide Linkages and H-bonding into EVA-GMA Elastomer for Developing and Vitrimer-like Composite - Bhavya Parameswaran, IIT Kharagpur • Molecular Engineering and Additive Manufacturing of Functional Elastomers and Composites - Naifu Shen, The University of Akron STUDENT SYMPOSIUM • Surface Migration of 6PPD and Design of a Novel Sustainable Antiozonants and Antioxidants for Rubber Formulations - Hyunsang Lee, The University of Akron
- Page 9 and 10: EXHIBITOR LIST - Ordered by Booth #
- Page 11 and 12: IEC Online Guide Visit the My Regis
- Page 13 and 14: Thank you to our valued Platinum, G
- Page 15 and 16: FULL-CYCLE SERVICE FASTER DEVELOPME
- Page 17 and 18: Rubber Division, ACS Corporate Memb
- Page 19 and 20: Visit Ergon at Rubber Expo Booth 24
- Page 21 and 22: Two great events presented by Rubbe
- Page 23 and 24: EXHIBITOR LIST 2737 Front St Cuyaho
- Page 25 and 26: Thank you for your support! Through
- Page 27 and 28: Game-changing solutions for rubber
- Page 29 and 30: EXHIBITOR LIST itwprobrands.com rst
- Page 31 and 32: You’ve known us for our industry
- Page 33 and 34: About Rubber Division, ACS Rubber D
- Page 35 and 36: Visit us October at the Booth 214 I
- Page 37 and 38: TRUST US. WE WROTE THE BOOK. Come s
- Page 39 and 40: BOOTH NUMBER 633 From Product Selec
- Page 41 and 42: 0.20 sSBR 0.18 0.16 0.14 0.12 0.10
- Page 44 and 45: EXHIBITOR LIST EXHIBITOR LIST shiko
- Page 46 and 47: EXHIBITOR LIST EXHIBITOR LIST 248-7
- Page 48 and 49: TECHNICAL MEETING TECHNICAL MEETING
- Page 50 and 51: TECHNICAL MEETING TECHNICAL MEETING
- Page 52 and 53: TECHNICAL MEETING TECHNICAL MEETING
- Page 54 and 55: TECHNICAL MEETING TECHNICAL MEETING
- Page 56: TECHNICAL MEETING TECHNICAL MEETING
- Page 59: TECHNICAL MEETING - OCTOBER 17-19,
- Page 63 and 64: Innovative solutions from Kuraray!
- Page 65 and 66: The Rubber Division, ACS Team Lakis
- Page 67: is easier when you have a dependabl
STUDENT SYMPOSIUM • OCTOBER 17-19, <strong>2023</strong><br />
STUDENT POSTERS<br />
Students will be at their posters on the Expo floor on Tuesday,<br />
October 17, 2:30 p.m. – 3:30 p.m. and on the Ballroom Level<br />
outside Technical Meeting rooms 25-26 on Wednesday, October<br />
18, 2:30 p.m. – 3:30 p.m.<br />
• Self-healable and Super-Stretchable Conductive<br />
Elastomeric Nanocomposites for Efficient Thermal<br />
Management Characteristics and Electromagnetic<br />
Interference Shielding - Palash Das, IIT Kharagpur<br />
• Preferential Localization of Conductive Filler in Ethyleneco-Methyl<br />
Acrylate/Thermoplastic Polyolefin Polymer<br />
Blends to Reduce Percolation Threshold and Enhanced<br />
Electromagnetic Radiation Shielding over K Band Region -<br />
Ankur Katheria, IIT Kharagpur<br />
• Engineering of ß-hydroxyl esters, Disulfide Linkages and<br />
H-bonding into EVA-GMA Elastomer for Developing and<br />
Vitrimer-like Composite - Bhavya Parameswaran, IIT<br />
Kharagpur<br />
• Molecular Engineering and Additive Manufacturing of<br />
Functional Elastomers and Composites - Naifu Shen, The<br />
University of Akron<br />
STUDENT SYMPOSIUM<br />
• Surface Migration of 6PPD and Design of a Novel<br />
Sustainable Antiozonants and Antioxidants for Rubber<br />
Formulations - Hyunsang Lee, The University of Akron
Change language