IEC 2023 Guide
TECHNICAL MEETING TECHNICAL MEETING – OCTOBER 17-19, 2023 Room 25B Session Topic: Synthesis & Chemical Modification of Rubber Co-chairs: Mousumi DeSarkar, DENKA USA; Malik Al-Afyouni, Flexsys Session Topic: Thermoplastic Elastomers Co-chairs: Chris Robertson, Polymer Technology Services LLC; Greg Li, Dow Chemical Session Topic: Contributed Papers Chair: Peter Cameron, Tokai Carbon Session Topic: Characterization of Rubber, Additives & Compounds Chair: Ed Terrill, Akron Rubber Development Laboratory Room 25C Session Topic: Advances in Materials & Processes for Tires Chair: Yusheng Chen, Dupont Session Topic: Adhesives Co-chairs: Ed Terrill, Akron Rubber Development Laboratory; Lewis Tunnicliffe, Birla Carbon Session Topic: Elastomer Fatigue & Environmental Resistance Co-chairs: Ken Bates, Polymer Solutions Group; Chris Robertson, Polymer Technology Services LLC Room 26A Session Topic: Elastomers & Compounding Materials for Healthcare/Pharma Chair: Kim Dempsey-Miller, KimLink, LLC Session Topic: Wear, Tribology & Wear-particles Chair: Jungmee Kang, LG Chemical Session Topic: The PFAS Regulatory Environment Session Topic: Safeguarding the Use of Rubber Chemicals & Additives Co-chairs: Mousumi DeSarkar, DENKA USA; Howard Colvin, Consultant Session Topic: New Commercial Developments Chair: Lewis Tunnicliffe, Birla Carbon Room 26B Session Topic: Sustainable Materials Co-chairs: Critt Ohlemacher, Smithers; Constantine Khripin, Cabot Corporation Session Topic: Sustainable Processes Co-chairs: Seth Young, Birla Carbon; Malik Al-Afyouni, Flexsys Session Topic: Masterbatch Techniques, Custom Mixing & Dispersions Co-chairs: Peter Cameron, Tokai Carbon; Jungmee Kang, LG Chemical Session Topic: The PFAS Regulatory Environment Session Topic: Contributed Papers Chair: Peter Cameron, Tokai Carbon Tuesday 1:30 p.m. – 2:45 p.m. Tuesday 3:15 p.m. – 4:30 p.m. Wednesday 8:30 a.m. – 12 p.m. Wednesday 1 p.m. – 4:25 p.m. Thursday 9 a.m. – 12:25 p.m. Tuesday 1:30 p.m. – 4:55 p.m. Wednesday 8:30 a.m. – 1:50 p.m. Wednesday 1:50 p.m. – 3:35 p.m. Wednesday 3:35 p.m. – 4:50 p.m. Thursday 9 a.m. – 12:25 p.m. Tuesday 1:30 p.m. – 4:05 p.m. Tuesday 4:05 p.m. – 4:55 p.m. Wednesday 8:30 a.m. – 11:10 a.m. Wednesday 11:10 a.m. – 12 p.m. Wednesday 1 p.m. – 4:50 p.m. Thursday 9 a.m. – 12:25 p.m. Tuesday 1:30 p.m. – 4:55 p.m. Wednesday 8:30 a.m. – 11:35 a.m. Wednesday 12:35 p.m. – 4:25 p.m. Thursday 9 a.m. – 10:15 a.m. Thursday 10:45 a.m. – 11:10 a.m. Thursday 11:10 a.m. – 12:25 p.m. SPONSORED BY Since 1995, LIANDA has been a reliable source of high-quality products for both the rubber and plastics industries. LIANDA focuses on high-performance elastomers such as FKM, HNBR, Flourosilicone (FVMQ), Silicone HCR, CPE, CR, CSM and ECO; as well as specialty additives such as FKM curatives, peroxides, coagents, flame retardants, Silane coupling agent, composite zinc oxide, and precipitated and fumed Silica. LIANDA has a highly experienced TS&D team, along with a fully equipped lab, which enables the company to provide a high-level technical support and expertise to its customers. LIANDA focuses on collaboration with customers as it continuously strives to satisfy their technical, logistical and commercial needs. LIANDA provides proactive and collaborative solutions to its customers to meet today’s ever-changing needs and volatile supply and logistic challenges. LIANDA’s motto is to be More Than A Distributor. 46 INTERNATIONAL ELASTOMER CONFERENCE
More than a Distributor Visit us at Booth #732 Elastomers HNBR FKM/FFKM Fluorosilicone Silicone HCR CPE CSM CR ECO Specialty Chemicals Peroxides Coagents FKM Curative Silane Zinc Sulfide Zinc Oxide Silica Flame Retardants High Performance Elastomers for the Most Demanding Applications FKM Copolymer Terpolymer Cure Incorporated Peroxide Curable Low Temp Grades Perfluoronated HNBR Low/Mid/High ACN Levels Various Saturation Levels Various Viscosity Levels Ultra Low Viscosity Grades Advanced Catalyst Tech Expanding Capacity Our highly experienced TS&D & commercial teams, along with a well-equipped lab, allow us to provide technical support and expertise our customers demand. ISO 9001:2015 www.liandacorp.com • 330 . 653 . 8341 • inquiry@liandacorp.com
- Page 1 and 2: October 16- 19, 2023 Huntington Con
- Page 3 and 4: CHAIR’S WELCOME Welcome to IEC 20
- Page 5 and 6: SPECIAL PRESENTATIONS EXPO THEATER
- Page 7 and 8: SPECIAL EVENTS Women’s Event (WOR
- Page 9 and 10: EXHIBITOR LIST - Ordered by Booth #
- Page 11 and 12: IEC Online Guide Visit the My Regis
- Page 13 and 14: Thank you to our valued Platinum, G
- Page 15 and 16: FULL-CYCLE SERVICE FASTER DEVELOPME
- Page 17 and 18: Rubber Division, ACS Corporate Memb
- Page 19 and 20: Visit Ergon at Rubber Expo Booth 24
- Page 21 and 22: Two great events presented by Rubbe
- Page 23 and 24: EXHIBITOR LIST 2737 Front St Cuyaho
- Page 25 and 26: Thank you for your support! Through
- Page 27 and 28: Game-changing solutions for rubber
- Page 29 and 30: EXHIBITOR LIST itwprobrands.com rst
- Page 31 and 32: You’ve known us for our industry
- Page 33 and 34: About Rubber Division, ACS Rubber D
- Page 35 and 36: Visit us October at the Booth 214 I
- Page 37 and 38: TRUST US. WE WROTE THE BOOK. Come s
- Page 39 and 40: BOOTH NUMBER 633 From Product Selec
- Page 41 and 42: 0.20 sSBR 0.18 0.16 0.14 0.12 0.10
- Page 44 and 45: EXHIBITOR LIST EXHIBITOR LIST shiko
- Page 46 and 47: EXHIBITOR LIST EXHIBITOR LIST 248-7
- Page 50 and 51: TECHNICAL MEETING TECHNICAL MEETING
- Page 52 and 53: TECHNICAL MEETING TECHNICAL MEETING
- Page 54 and 55: TECHNICAL MEETING TECHNICAL MEETING
- Page 56: TECHNICAL MEETING TECHNICAL MEETING
- Page 59 and 60: TECHNICAL MEETING - OCTOBER 17-19,
- Page 61 and 62: STUDENT SYMPOSIUM • OCTOBER 17-19
- Page 63 and 64: Innovative solutions from Kuraray!
- Page 65 and 66: The Rubber Division, ACS Team Lakis
- Page 67: is easier when you have a dependabl
More than a Distributor<br />
Visit us at<br />
Booth #732<br />
Elastomers<br />
HNBR<br />
FKM/FFKM<br />
Fluorosilicone<br />
Silicone HCR<br />
CPE<br />
CSM<br />
CR<br />
ECO<br />
Specialty<br />
Chemicals<br />
Peroxides<br />
Coagents<br />
FKM Curative<br />
Silane<br />
Zinc Sulfide<br />
Zinc Oxide<br />
Silica<br />
Flame<br />
Retardants<br />
High Performance Elastomers<br />
for the<br />
Most Demanding Applications<br />
FKM<br />
Copolymer<br />
Terpolymer<br />
Cure Incorporated<br />
Peroxide Curable<br />
Low Temp Grades<br />
Perfluoronated<br />
HNBR<br />
Low/Mid/High ACN Levels<br />
Various Saturation Levels<br />
Various Viscosity Levels<br />
Ultra Low Viscosity Grades<br />
Advanced Catalyst Tech<br />
Expanding Capacity<br />
Our highly experienced TS&D & commercial<br />
teams, along with a well-equipped lab,<br />
allow us to provide technical support<br />
and expertise our customers demand.<br />
ISO 9001:2015<br />
www.liandacorp.com • 330 . 653 . 8341 • inquiry@liandacorp.com
Change language