GB - BRUNOX CATALOGUE 2023
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CATALOGUE</strong><br />
RUST TREATMENT<br />
CORROSION PROTECTION<br />
LUBRICATION<br />
CLEANING<br />
CARE
CHEMICAL TOOLS FOR<br />
PROFESSIONAL RESULTS.<br />
HISTORY<br />
<strong>BRUNOX</strong>® products have been around for 40<br />
years now and the <strong>BRUNOX</strong>® company history is<br />
characterised by the continuous development &<br />
research work performed by the founder of ENVIRO-<br />
CHEMIE AG CH-8733 Eschenbach SG. Besides his<br />
construction company for sewage treatment plants,<br />
he also ran a chemical products department, which<br />
was always his secret favourite.<br />
1976: The <strong>BRUNOX</strong>® Rust Converter Emulsion was<br />
developed and launched on the market. This product<br />
was of good quality, but did not satisfy all aspects,<br />
so has continually evolved.<br />
1985: The breakthrough came when Bruno<br />
Lieberherr (BSc), managing director and owner<br />
of ENVIRO-CHEMIE AG, presented a stunning<br />
innovation, his initial Europe-patented product, the<br />
first rust stopper and primer in one from a handy<br />
spray can. This was launched with the brand name<br />
<strong>BRUNOX</strong>® epoxy®.<br />
1994: A public limited company was founded<br />
specifically for <strong>BRUNOX</strong>® products, namely <strong>BRUNOX</strong><br />
AG with headquarters in CH-8733 Eschenbach SG.<br />
1995: The product range was expanded with the<br />
addition of the preventive corrosion protection<br />
range, which includes the <strong>BRUNOX</strong>® Turbo-Spray®,<br />
<strong>BRUNOX</strong>® LUB & COR® and <strong>BRUNOX</strong>® IX-100<br />
brands.<br />
1996: <strong>BRUNOX</strong>® Korrosionsschutz GmbH was<br />
founded in 85001 Ingolstadt, Germany.<br />
1999: <strong>BRUNOX</strong>® Lubri-Food® joined the product<br />
portfolio.<br />
Further products for the bicycle and weapons<br />
industry were introduced over the years, right up to<br />
the present day.<br />
Thanks to their impressive quality, <strong>BRUNOX</strong>®<br />
products have become firmly established at a large<br />
number of companies over the years.<br />
Today, <strong>BRUNOX</strong>® products are exported to and<br />
marketed in over 50 countries.<br />
Page 3
Rust restoration in 3 steps!<br />
<strong>BRUNOX</strong>® epoxy® rust stop & primer is a<br />
high-quality rust restoration system and also<br />
acts as epoxy resin primer. It forms a permanent<br />
protective layer and guarantees professional<br />
results.
<strong>BRUNOX</strong>®<br />
PRODUCTS<br />
CARS AND COMMERCIAL VEHICLES<br />
IRONMONGERY AND INDUSTRY<br />
COATING AND COLOUR TECHNOLOGY<br />
BICYCLES AND E-BIKES<br />
HUNTING AND SHOOTING<br />
Page 5
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® epoxy®<br />
CARS AND<br />
COMMERCIAL VEHICLES<br />
IRONMONGERY AND<br />
INDUSTRY<br />
COATING AND COLOUR<br />
TECHNOLOGY<br />
Vehicle chassis<br />
Metal structures<br />
Metal workers<br />
Underbodies and<br />
hollow spaces<br />
Gates<br />
Coachbuilders<br />
Commercial vehicles and<br />
agricultural technology<br />
Fences<br />
Property developers
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® epoxy®<br />
Patented rust converter and primer<br />
in one. Neutralises rust.<br />
<strong>BRUNOX</strong>® epoxy®forms an organometallic<br />
iron complex with iron and<br />
rust. This results in a black, extremely<br />
compact and durable protective layer that provides<br />
long-term corrosion protection, while also acting as a<br />
fully-fledged primer, thanks to the addition of epoxy<br />
resin.<br />
Benefits<br />
• No need to wash off<br />
• Excellent levelling, leaving no brush marks<br />
• Free of heavy metals and mineral acids<br />
• Broadly compatible with most commercially<br />
available top systems<br />
• Can also be applied in undiluted form using airless<br />
or compressed air guns of any kind<br />
• Penetrates approx. ten times deeper into the rust<br />
pores than conventional rust converter emulsion<br />
Container sizes: spray: 150 ml, 400 ml,<br />
bulk: 25 ml, 100 ml, 250 ml, 1000 ml, 5 l<br />
Technical Data<br />
Colour: amber-coloured solution<br />
Recommended drying layer thickness: at least 40-50 μm<br />
Consumption: about 60 g/m² per coating / 15 m²/litre for one coating<br />
Dilution: max. 8 % acetone<br />
Heat resistance: max. 80 °C<br />
Dust-dry: after about 1 hour at 20 °C and dry air<br />
Cured: after about 24 hours at 20 °C and dry air<br />
pH value (20 °C): 4 - 4.5 (DIN 53785)<br />
Gloss level: about 60 %, depending on amount of rust<br />
Solids content: brushing / industrial quality: about 25 %, spray: about 16 % (DIN 53216)<br />
Density (20 °C): 0.99 ± 0.02 g/cm³, spray = 0.90 g/cm³ (DIN 53785)<br />
Viscosity (25 °C): brushing quality about 118 centistokes, spray: about 37 centistokes (DIN EN ISO 3219)<br />
Supplementary product <strong>BRUNOX</strong>® 1-K-Filler<br />
<strong>BRUNOX</strong>® 1-K-Filler is suitable<br />
for priming and pre-coating<br />
metal surfaces. <strong>BRUNOX</strong>®<br />
1-K-Filler improves corrosion<br />
protection, boasts excellent filling<br />
properties and creates the perfect<br />
base for all air-drying acrylic,<br />
synthetic-resin & nitro-combi<br />
coating systems.<br />
Container sizes: spray: 400 ml<br />
Benefits<br />
• Excellent filling properties<br />
• Improves corrosion protection<br />
• Excellent levelling, resulting in smooth surfaces<br />
• Provides improved gloss results<br />
Technical Data<br />
Colour:<br />
light grey<br />
Gloss level:<br />
matt<br />
Yield: approx. 0.7 m² / 400 ml ± 12 %<br />
Density (20 °C):<br />
aerosol 0.80 ± 0.02 g/cm³<br />
Flash point:<br />
not applicable as it is an aerosol<br />
Application temperature: +10 °C – +25 °C, max. humidity 50 %<br />
Page 7
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® IX 100<br />
CARS AND<br />
COMMERCIAL VEHICLES<br />
IRONMONGERY AND<br />
INDUSTRY<br />
COATING AND COLOUR<br />
TECHNOLOGY<br />
Underbody protection<br />
Storage of semifinished<br />
products<br />
Metal workers<br />
Hollow-space sealing<br />
Outdoor storage<br />
Coachbuilders<br />
Preservation<br />
Overseas shipping<br />
Property developers
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® IX 100<br />
Corrosion protection & wax-based<br />
sealing that is 100 % compatible<br />
with <strong>BRUNOX</strong>® epoxy®. It is ideal<br />
as underbody protection, hollowspace<br />
sealing or preservation.<br />
<strong>BRUNOX</strong>® IX 100 forms a compact waxy protective<br />
film that does not become brittle and persistently<br />
withstands most environmental impacts. The perfect<br />
high-quality seal provides protection even when<br />
directly exposed to the weather, including against<br />
flue gas and salt water.<br />
Benefits<br />
• For the interim or permanent storage or transport<br />
of semi-finished products, axles, shafts, springs,<br />
machine guides, spindles, mounts, sleeves,<br />
flanges, etc.<br />
• As a protective layer in salty conditions for cars,<br />
municipal vehicles and snowploughs<br />
• Chain wax, for heavily used chains, drives,<br />
sliding tracks, rails, towbars, cable hoists, trailers,<br />
semi-trailers, superstructures and forklift trucks<br />
Technical Data<br />
Container sizes: spray: 500 ml,<br />
bulk: 5 l, 20 l, 200 l<br />
Appearance:<br />
olive brown, thixotropic<br />
Density (20 °C):<br />
aerosol: 0.89 ± 0.04 g/cm³, bulk: 0.93 ± 0.04 g/cm³<br />
Dynamic viscosity (20 °C):<br />
aerosol = 48 mPas, bulk = 480 mPas<br />
Flash point: aerosol: < 0 °C, bulk: 51 °C<br />
Yield:<br />
40 – 16 m²/l, (25 – 50 μm)<br />
Consistency:<br />
dry, touch-proof, waxy film<br />
Drying time:<br />
dust dry after 1 to 2 hours, cured after 12 hours<br />
Page 9
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® Turbo-Spray®<br />
CARS AND<br />
COMMERCIAL<br />
VEHICLES<br />
IRONMONGERY<br />
AND INDUSTRY<br />
COATING<br />
AND COLOUR<br />
TECHNOLOGY<br />
BICYCLES AND<br />
E-BIKES<br />
Lubrication of<br />
joints and hinges<br />
Lubrication of<br />
moving parts<br />
Lubrication of<br />
implements<br />
(e.g. ladders and<br />
scissor lifts)<br />
Lubrication of<br />
Bowden cables<br />
Care of aluminium<br />
and<br />
chrome<br />
Care of metal<br />
Care of machines<br />
Care of bearings<br />
and joints<br />
Undoes screw fittings<br />
and glow plugs<br />
Temporary corrosion<br />
protection<br />
Undoes screws<br />
For all maintenance<br />
work
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® Turbo-Spray®<br />
The all-round multifunctional<br />
spray!<br />
Together with TURBOLINE, <strong>BRUNOX</strong>®<br />
Turbo-Spray® forms a 1 - 2 µm transparent,<br />
non-curing corrosion protection and lubricant<br />
film that displaces moisture and remedies surface<br />
leakage. It loosens seized-up connectors, removes any<br />
organic/mineral contaminants, cleans oxidised contacts<br />
and dissolves tar, adhesive residue, etc., without<br />
attacking paint or rubber. Also suitable for the care of<br />
stainless steel, copper and brass. Highly effective even<br />
during continuous operation.<br />
Benefits<br />
• Low viscosity<br />
• NSF-H2-certified<br />
• Guaranteed not to resinify<br />
• Effective in the long term<br />
• Excellent yield of 100 – 120 m²/L<br />
• Perfect lubricating properties to – 50 °C<br />
• Free of silicone, PTFE and graphite<br />
• Excellent creeping capability, due to its outstanding<br />
capillary strength<br />
Technical Data<br />
Container sizes: spray: 100 ml, 300 ml,<br />
400 ml, 500 ml, 500 ml Power-Click,<br />
bulk: 5 l, 20 l, 200 l<br />
Appearance:<br />
clear, olive green<br />
Density (20 °C):<br />
0.83 ± 0.02 g/cm³<br />
Dynamic viscosity (20 °C):<br />
6.5 mPas (bulk and AEROSOL)<br />
Flash point: 78 °C (open packaging) DIN ISO 2592<br />
Heat resistance: briefly up to 160 °C / long-term up to 125 °C<br />
Fixed point: below -50 °C<br />
pH value:<br />
neutral<br />
Film characteristics:<br />
creeping<br />
Film thickness:<br />
1 - 2 μm<br />
Yield:<br />
100 - 120 m²/l<br />
Lubricity according to Brugger:<br />
23 N/mm²<br />
Consistency:<br />
film will not harden, 64 mPas<br />
Dielectric strength:<br />
UD: 45 KV eff-ED: 182 KV eff / cm<br />
<strong>BRUNOX</strong>® Lubri-Food® | All-rounder for the food industry.<br />
‘UNBEATABLE RUST REMOVER WITH NSF H1 / USDA 1998 H1-certification’<br />
<strong>BRUNOX</strong>® Lubri-Food® is a lubricant, creeping oil, preservation and service spray for the<br />
maintenance of machinery in the food and beverage industry. Also ideal for the care of<br />
high-quality kitchen and hunting knives. Meets the highest demands of the cosmetics and<br />
pharmaceutical industries.<br />
NSF - H1 approval as:<br />
• Lubricant<br />
• Maintenance spray<br />
• Stainless steel and aluminium care<br />
Container sizes: pump dispenser: 120 ml,<br />
spray: 400 ml, bulk: 5 l<br />
Technical Data<br />
Appearance:<br />
clear, colourless<br />
Flash point: 73 °C (open packaging) DIN ISO 2592<br />
Heat resistance: briefly up to 155 °C / long-term up to 125 °C<br />
pH value:<br />
neutral<br />
Film characteristics:<br />
creeping<br />
Film thickness:<br />
1 - 2 μm<br />
Yield:<br />
100 m²/l<br />
Consistency:<br />
no gumming, film will not harden<br />
Page 11
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® LUB&COR®<br />
CARS AND<br />
COMMERCIAL<br />
VEHICLES<br />
IRONMONGERY<br />
AND INDUSTRY<br />
COATING<br />
AND COLOUR<br />
TECHNOLOGY<br />
HUNTING AND<br />
SHOOTING<br />
Lubrication of<br />
tailgates, convertible<br />
roofs, sliding doors<br />
Lubrication of all<br />
moving parts for<br />
conveyor belts,<br />
gates, craneways<br />
Lubrication of<br />
implements<br />
(e.g. ladders)<br />
Lubrication of<br />
mechanisms, such<br />
as trigger and<br />
ammunition units<br />
Care of agricultural<br />
machinery and<br />
municipal vehicles<br />
Thread-cutting oil<br />
Care of machinery<br />
Care of breeches,<br />
triggers and<br />
slide bars<br />
Long-term corrosion<br />
protection for<br />
engines<br />
Long-term corrosion<br />
protection for<br />
storage<br />
Long-term corrosion<br />
protection for<br />
machinery<br />
Long-term corrosion<br />
protection for<br />
weapons storage
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® LUB&COR®<br />
All-weather protection against:<br />
• Splash water<br />
• Condensation formation<br />
• Extremely high humidity<br />
• Salty conditions<br />
• Aggressive environmental influences, flue gas<br />
Benefits<br />
Lubricant and high-tech<br />
corrosion protection test<br />
winner.<br />
<strong>BRUNOX</strong>® LUB&COR® forms an<br />
extremely even, non-drying corrosion<br />
protection film that will also penetrate corners<br />
and edges that are difficult to access. <strong>BRUNOX</strong>®<br />
LUB&COR® therefore guarantees excellent long-term<br />
corrosion protection. At the same time, it is a resilient,<br />
all-weather lubricant that meets the highest demands<br />
and is also resistant to acidic conditions and other<br />
environmental influences.<br />
• NSF-H2-certified<br />
• No rinsing – all-weather<br />
• Guaranteed lubricating properties to - 41 °C<br />
• Free of silicone, PTFE and graphite<br />
• Guaranteed not to resinify, no residue<br />
Container sizes: spray: 100 ml, 400 ml,<br />
bulk: 100 ml, 5 l, 20 l, 200 l<br />
Technical Data<br />
Appearance:<br />
olive-yellowish, thixotropic<br />
Density (20 °C):<br />
0.85 ± 0.02 g/cm³<br />
Dynamic viscosity (20 °C):<br />
bulk = 85 mPas, aerosol = 83 mPas<br />
Flash point: aerosol: < 0 °C, bulk: 51 °C<br />
Heat resistance:<br />
- 41 °C to 100 °C, long-term<br />
Yield:<br />
about 40 m²/l at 5 μm thickness<br />
Page 13
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® ToP-LoCK®<br />
CARS AND<br />
COMMERCIAL VEHICLES<br />
IRONMONGERY AND<br />
INDUSTRY<br />
BICYCLES AND E-BIKES<br />
Car keys<br />
Locking systems and cylinders<br />
e-Bike battery lock cylinders<br />
Engine cover locks<br />
Sliding doors and gates<br />
Frame locks<br />
Roof box and bicycle<br />
carrier locks<br />
Padlocks<br />
Bicycle locks
<strong>BRUNOX</strong>® ToP-LoCK®<br />
PRODUCT<br />
INFORMATION<br />
High-tech fittings spray:<br />
‘No resinifying, no icing, for<br />
long lock life’<br />
<strong>BRUNOX</strong>® ToP-LoCK® cares for, lubricates and<br />
protects locks, hinges and fittings to -52 °C.<br />
<strong>BRUNOX</strong>® ToP-LoCK® is free of silicone, PTFE<br />
and graphite, thereby making it ideal for installing,<br />
maintaining and repairing locking systems, cylinders,<br />
fittings, locks, hinges, windows and doors.<br />
Benefits<br />
• No resinifying<br />
• Free of silicon, PTFE and graphite<br />
• Excellent corrosion protection<br />
• Solves almost any problem to -52 °C<br />
• Will not attack rubber, plastic, synthetic material or<br />
any metallic surfaces<br />
• Unblocks cylinders, shutters, locking<br />
systems, hinges and fittings<br />
Container sizes: spray: 100 ml<br />
Technical Data<br />
Appearance:<br />
clear<br />
Density (20 °C):<br />
0.83 ± 0.02 g/cm³<br />
Dynamic viscosity (20 °C):<br />
6 mPas<br />
Flash point: 79 °C, DIN ISO 2592<br />
Fixed point: below -52 °C<br />
pH value:<br />
neutral<br />
Film characteristics:<br />
creeping<br />
Film thickness:<br />
1 - 2 μm<br />
Consistency:<br />
film will not harden<br />
Page 15
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® Deo FÜR DIE FEDERGABEL®<br />
BICYCLES AND E-BIKES<br />
Suspension forks<br />
Seat posts<br />
Shock absorber elements
<strong>BRUNOX</strong>® Deo FÜR DIE FEDERGABEL®<br />
PRODUCT<br />
INFORMATION<br />
The suspension fork<br />
care recommended by<br />
professionals<br />
millionfold proven - since 2000.<br />
<strong>BRUNOX</strong>® Deo FÜR DIE FEDERGABEL® keeps seals<br />
supple and repels dirt.<br />
Optimum conditions for maximum performance.<br />
It cares for shock absorber joints and adjustment<br />
screws and ensures that adjustment knobs are easy<br />
to operate. Cares for and seals crowns, immersion<br />
pipes and stanchions and provides long-term<br />
protection against corrosion.<br />
It will significantly extend the service life of<br />
suspension parts!<br />
Clean sealing rings and stanchions allow the<br />
smoother, more constant deflection of suspension<br />
forks, seat posts and shock absorber elements,<br />
repeatedly ensuring maximum performance.<br />
Improves the response characteristics of all<br />
suspension elements.<br />
Also suitable for motorbikes!<br />
Container sizes: spray: 100 ml<br />
Technical Data<br />
Appearance:<br />
clear<br />
Density (20 °C):<br />
0.83 ± 0.02 g/cm³<br />
Viscosity (20 °C):<br />
4 mPas<br />
Flash point: 78 °C (open packaging) DIN ISO 2592<br />
Heat resistance: briefly up to 150 °C, long-term up to 120 °C<br />
Fixed point: below -50 °C<br />
pH value:<br />
neutral<br />
Film characteristics:<br />
creeping<br />
Film thickness:<br />
1 - 2 μm<br />
Lubricating capacity:<br />
over 780 kg (Falex test)<br />
Consistency:<br />
film will not harden, 64 mPas<br />
<strong>BRUNOX</strong>® CARBON CARE<br />
This is the ultimate solution for all carbon products.<br />
Care for high-end bicycle components, carbon parts, bonnets, sports car interiors and<br />
carbon accessories, etc. Carbon components are high-quality and robust, yet extremely<br />
sensitive. <strong>BRUNOX</strong>® CARBON CARE is the solution for components that deserve topquality<br />
care.<br />
Technical Data<br />
Appearance:<br />
clear<br />
Density (20 °C):<br />
bulk: 0.82 ± 0.02 g/cm³<br />
Dynamic viscosity (20 °C):<br />
bulk = 4 mPas<br />
Flash point: bulk: 78 °C<br />
Heat resistance:<br />
130 °C, long-term<br />
Yield:<br />
about 110 m²/l at 1.5 μm thickness<br />
Container sizes: pump dispenser: 120 ml<br />
Page 17
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® Top-Kett®<br />
BICYCLES AND E-BIKES<br />
All-weather chain care<br />
‘BEST CHAIN SPRAY’<br />
TEST WINNER - awarded<br />
GTÜ 03/2017<br />
High-tech corrosion protection
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® Top-Kett®<br />
<strong>BRUNOX</strong>® Top-Kett® is an<br />
all-weather, high–tech chain<br />
lubricant and test winner!<br />
<strong>BRUNOX</strong>® Top-Kett® forms<br />
an even transparent, compact<br />
lubricating film that will not dry out. Withstands<br />
high loads, such as pressure, dirt and moisture.<br />
Guarantees long lubrication intervals, light<br />
chain guidance, effortless gear changes and<br />
reduced chain stretch.<br />
Thanks to its compressive strength, <strong>BRUNOX</strong>®<br />
Top-Kett® provides lasting corrosion<br />
protection for up to six months in any weather.<br />
‘The absolute no. 1 in this test’ with 24<br />
points!<br />
GTÜ TEST WINNER [03/2017]<br />
Container sizes: spray: 100 ml, 400 ml,<br />
bulk: 100 ml, 5 l,<br />
Technical Data<br />
Appearance:<br />
olive-yellowish, thixotropic<br />
Density (20 °C):<br />
0.85 ± 0.02 g/cm³<br />
Dynamic viscosity (20 °C):<br />
bulk = 85 mPas, aerosol = 83 mPas<br />
Flash point: aerosol: < 0 °C, bulk: 51 °C<br />
Heat resistance:<br />
- 41 °C to 100 °C, long-term<br />
Yield:<br />
about 40 m²/l at 5 μm thickness<br />
Page 19
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® BIKE-WASHER<br />
BICYCLES AND E-BIKES<br />
Chain<br />
Drive<br />
Frame
<strong>BRUNOX</strong>® BIKE-WASHER<br />
PRODUCT<br />
INFORMATION<br />
The biodegradable bicycle, e-Bike<br />
and two-wheeler cleaner.<br />
<strong>BRUNOX</strong>® BIKE-WASHER is a universal<br />
detergent for bicycles, e-Bikes, twowheelers<br />
and motorbikes.<br />
Thanks to its gel formulation, this cleaner clings to<br />
vertical areas and thoroughly removes even the most<br />
stubborn dirt, such as oil, grease, road dust or crusty mud<br />
from the trail, leaving no residue.<br />
Even soiled chains, sprockets and cassettes will soon be<br />
beautifully clean again.<br />
Due to its gentle gel formulation, <strong>BRUNOX</strong>® BIKE-<br />
WASHER is compatible with all materials:<br />
carbon parts, rubber and plastic surfaces, aluminium and<br />
all kinds of paint (including matt paint).<br />
BIOdegradable<br />
Container sizes: spray bottle: 1 l<br />
Technical Data<br />
Appearance:<br />
transparent, orange<br />
Density (20 °C):<br />
1.02 ± 0.02 g/cm³<br />
Scent:<br />
Citral, Limonene<br />
pH value (20 °C): 9.00<br />
Steam pressure (20 °C):<br />
23.4 hPA (17.6 mm Hg)<br />
Solubility in water:<br />
fully miscible<br />
Page 21
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® Turbo-Clean<br />
BICYCLES AND E-BIKES<br />
HUNTING AND<br />
SHOOTING<br />
CARS AND<br />
COMMERCIAL VEHICLES<br />
Disc brakes<br />
Cleans trigger groups<br />
and ammunition units<br />
Brake discs<br />
Multi-surfaces cleaner<br />
Removes traces of smoke,<br />
soot, grease and oil<br />
Brake pads<br />
Removes brake fluid, tyre<br />
bead lubricant and dirt<br />
Results in a totally<br />
clean surface<br />
Brake calipers
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® Turbo-Clean<br />
<strong>BRUNOX</strong>® Turbo-Clean is<br />
the acetone-free solution<br />
for degreasing, cleaning and<br />
maintaining bicycle, motorbike<br />
and vehicle components.<br />
It removes brake fluid and brake dust, as well as<br />
grease, oil, tyre bead lubricants, organic and mineral<br />
dirt from soiled disc brakes in next to no time.<br />
360° power-pressure technology<br />
Thanks to a 360° power-pressure valve, <strong>BRUNOX</strong>®<br />
Turbo-Clean can be completely discharged in any<br />
position. <strong>BRUNOX</strong>® Turbo-Clean is sprayed at very<br />
high pressure, thereby ensuring optimum cleaning<br />
results.<br />
<strong>BRUNOX</strong>® Turbo-Clean evaporates without leaving<br />
any residue and is also extremely water-repellent.<br />
<strong>BRUNOX</strong>® Turbo-Clean is entirely neutral towards<br />
rubber, plastics, O-rings and brake hoses.<br />
Container sizes: spray: 500 ml<br />
Technical Data<br />
Appearance:<br />
Scent:<br />
Density (20 °C):<br />
Flash point:<br />
transparent, colourless<br />
characteristic, solvent-like<br />
0.68 ± 0.02 g/cm³<br />
not applicable<br />
Page 23
APPLICATION EXAMPLES<br />
<strong>BRUNOX</strong>® Gun Care<br />
HUNTING AND SHOOTING<br />
Barrel cleaner<br />
Gun oil<br />
Maintenance spray
PRODUCT<br />
INFORMATION<br />
<strong>BRUNOX</strong>® Gun care<br />
<strong>BRUNOX</strong>® Gun Care is used by<br />
leading ammunition and weapons<br />
manufacturers.<br />
Companies such as RWS, Fiocchi,<br />
Sellier and Bellot use <strong>BRUNOX</strong>® Gun Care for barrel<br />
cleaning in the firing lane. Other manufacturers, such<br />
as CZ, Anschütz, Merkel, Bleiker, SIG-Sauer, etc., also<br />
use this high-quality gun care.<br />
• Cleans, lubricates and cares for all metal parts<br />
• Displaces moisture and protects against corrosion<br />
• Dissolves powder, lead, tombac, copper and nickel<br />
• Neutralises hand perspiration<br />
• Free of silicon, Teflon and graphite<br />
• Barrel cleaner with no ammonia or acids<br />
• Neutral towards plastic, rubber and wood<br />
No need to eject the barrel, there is no target<br />
displacement - no oil shot!<br />
A balanced combination of hydrocarbons ensures<br />
the function of rifles and automatic guns, even at<br />
temperatures to -55 °C.<br />
Container sizes: spray: 100 ml, 300 ml,<br />
pump dispenser: 100 ml, bulk: 100 ml, 5 l,<br />
gun care cloths<br />
Technical Data<br />
Appearance:<br />
clear<br />
Density (20 °C):<br />
0.83 ± 0.02 g/cm³<br />
Dynamic viscosity (20 °C):<br />
4.0 mPas (bulk and AEROSOL)<br />
Flash point: 78 °C (open packaging) DIN ISO 2592<br />
Heat resistance: briefly up to 160 °C, long-term 125 °C<br />
Fixed point: below -55 °C<br />
pH value:<br />
neutral<br />
Film characteristics:<br />
creeping<br />
Film thickness:<br />
1 - 2 μm<br />
Consistency:<br />
23 N/mm²<br />
Dielectric strength:<br />
film will not harden, 64 mPas<br />
Page 25
NOTES<br />
Page 27
CONTACT<br />
Head office<br />
<strong>BRUNOX</strong> AG<br />
Tunnelstrasse 6<br />
8732 Neuhaus SG<br />
Switzerland<br />
Phone: +41 55 285 80 80<br />
Fax: +41 55 285 80 81<br />
Email: office@brunox.com<br />
Branch office<br />
<strong>BRUNOX</strong> Korrosionsschutz GmbH<br />
Postfach 100127<br />
85001 Ingolstadt<br />
Germany<br />
Phone: +49 841 961 2904<br />
Fax: +49 841 961 2913<br />
Email: office@brunox.com<br />
@brunox_ag<br />
@brunox_ag<br />
brunox-ag<br />
<strong>BRUNOX</strong>® main catalogue - V3 | <strong>BRUNOX</strong> AG © <strong>2023</strong>.<br />
All the information in this catalogue has been carefully<br />
checked. Nevertheless, all the information is subject to<br />
change.