You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories<br />
and Suspension<br />
CATALOGUE<br />
Effective 1 August 2023<br />
INTERNATIONAL<br />
VOLUME <strong>22.2</strong>
ACCESSORIES AND SUSPENSION<br />
Warranty Periods<br />
Full warranty terms and conditions are located on the last pages of this <strong>Catalogue</strong><br />
PLEASE NOTE:<br />
No Warranty Claims or Goods Returned will be accepted unless accompanied by a completed WARRANTY CLAIM / GOODS RETURN FORM.<br />
Category Product Group Warranty - 1 Dec. 2022 Onwards Notes<br />
Front, Rear, Underbody,<br />
and Side Protection Products<br />
Bullbars 3 Year Excl Third Party Colour Coding<br />
Side Steps /Rails 3 Year Excl Third Party Colour Coding<br />
Underbody Protection 3 Year<br />
Rated Recovery Points 3 Year<br />
Monster Winches<br />
5 Year - Mechanical<br />
1 Year - Electrical<br />
Towbars 3 Year<br />
Vehicle Lighting 3 Year<br />
Electrical<br />
Vehicle Power 3 Year<br />
Alu-Cab Products Alu-Cab 1 Year - Moving Parts 3 Years Structural<br />
Roof Racks<br />
Ute Tub<br />
Other Products<br />
Steel and Alloy Mesh Roof Racks 3 Year<br />
Atlas Roof Racks 5 Year<br />
Slide-Away 3 Year<br />
Canopies*<br />
3 Year*<br />
Drawer Systems 2 Year<br />
Camping Furniture 1 Year<br />
Fender Flares 1 Year<br />
Ice-Cube Fridges<br />
3 Year - Components<br />
5 Year - Compressor<br />
Maxi Cases / Storage 2 Year<br />
Outdoor Lifestyle Products 1 Year<br />
Portable LED Lighting 1 Year<br />
Portable Power Products 2 Year<br />
Reco-Traks Limited Lifetime<br />
Recovery Equipment 2 Year<br />
Roof Bags 1 Year<br />
Seat Covers / Interior 1 Year<br />
Snorkels 5 Year<br />
Tents, Awnings and Swags 2 Year<br />
Tyre Repair 3 Year<br />
Water Tanks and Accessories<br />
2 Year - Tanks<br />
1 Year - Pumps and Accessories<br />
Excl Third Party Colour Coding<br />
* Glass not covered under warranty<br />
Suspension 4 Year Unlimited km<br />
Suspension<br />
GVM Upgrades 2 Year up to 40,000km<br />
Load Plus 2 Year Unlimited km<br />
All suspension products must undergo a safety check at 500km (310 miles) after fitment. Fitment should be performed by an authorised or licensed mechanic,<br />
competent with suspension installations. Special tools may be required when fitting some parts including struts. Damage to products through fitment error is<br />
not covered under warranty. Warranty may become void when product is installed in conjunction with anything other than genuine manufacturer or Ironman 4x4<br />
components.<br />
Where required, Ironman 4x4 recommend wheel alignment after fitment of any new suspension component. Obtaining wheel alignments is the responsibility<br />
of the buyer.<br />
FREIGHT CONDITIONS: Freight of all products is the buyer’s responsibility. Where Ironman 4x4 have arranged freight, costs involved will be invoiced to the<br />
buyer. Ironman 4x4 is not responsible for damage or loss during freight.<br />
FITTING: All prices listed may be subject to fitting costs. The price of fitting is determined by the individual fitting agent.<br />
Pricing subject to change without notice.<br />
For further information please contact us on 1300 731 137 or email info@ironman4x4.com.<br />
The names and reference numbers of manufacturers and suppliers other than Ironman 4x4 Pty Ltd used in this product catalogue are shown only to assist our<br />
customers in identifying replacement parts. Under no circumstances does Ironman 4x4 Pty Ltd imply that the parts sold by Ironman 4x4 are those of the OE<br />
manufacturers. Although care has been taken to ensure accuracy of data contained in this publication, Ironman 4x4 Pty Ltd does not assume any liability for errors<br />
or omissions.<br />
©Copyright 2023 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd.<br />
2 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION<br />
4WD AND TOURING GEAR PRODUCT<br />
ACCESSORIES AND SUSPENSION PRODUCT BY VEHICLE<br />
ACCESSORY AND SUSPENSION SPARE PARTS<br />
PRODUCT INSTALL TIMES GUIDE<br />
GVM UPGRADES<br />
SUSPENSION SELECTION INFORMATION<br />
SUSPENSION TECHNICAL SPECIFICATIONS<br />
ACCESSORY TECHNICAL SPECIFICATIONS<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
3
ACCESSORIES AND SUSPENSION<br />
Contents - Accessories to Suit<br />
4WD AND TOURING GEAR<br />
RECOVERY EQUIPMENT<br />
Electric Winches and Accessories............................................................................. 10<br />
Recovery Kits, Straps and Accessories.................................................................10-11<br />
Compressors ................................................................................................... 12<br />
Tyre Accessories and Lifting Jacks............................................................................ 12<br />
Recovery Boards ................................................................................................... 13<br />
Multi-Purpose Rear Wheel Bag................................................................................. 13<br />
Sand Flags ................................................................................................... 13<br />
Seat Covers ................................................................................................... 13<br />
Floor Mats ................................................................................................... 13<br />
Sun Screens ................................................................................................... 13<br />
Anchor Track ................................................................................................... 13<br />
CAMPING ACCESSORIES<br />
Camp Chairs ................................................................................................... 14<br />
Camp Tables ................................................................................................... 14<br />
Swags ................................................................................................... 15<br />
Sleeping Bags ................................................................................................... 15<br />
Pet Comfort ................................................................................................... 15<br />
Toilets and Showers.................................................................................................. 16<br />
Camp Steps ................................................................................................... 14<br />
Camp Kitchen ................................................................................................... 17<br />
Camp Tools ................................................................................................... 16<br />
Cleaning ................................................................................................... 17<br />
Torches and Fans ................................................................................................... 18<br />
Camp Lighting ................................................................................................... 18<br />
Camp Power ................................................................................................... 19<br />
Solar ................................................................................................... 19<br />
FRIDGE / FREEZERS<br />
Fridge / Freezers ................................................................................................... 20<br />
Fridge Slides ................................................................................................... 21<br />
Fridge Accessories ................................................................................................... 21<br />
CAMPING<br />
Rooftop Tents ..............................................................................................22-23<br />
Rooftop Tent Accessories.....................................................................................22-23<br />
DeltaWing 270º Awnings......................................................................................24-25<br />
DeltaWing 270º Awning Accessories......................................................................... 25<br />
Instant Awnings ................................................................................................... 26<br />
Awning Xtra Weathershield ...................................................................................... 26<br />
Awning Quick Release ............................................................................................. 26<br />
ACCESSORIES TO SUIT (BY VEHICLE)<br />
FIAT<br />
Fullback 2016+........................................................................................... 47<br />
FORD<br />
Bronco 2020+........................................................................................... 50<br />
Everest Next-Gen 2022+............................................................................ 76<br />
UAII 7/2018+................................................................................. 78<br />
9/2015 to 6/2018........................................................................... 80<br />
F150 Series 14 2021+............................................................................ 52<br />
Series 13 2015 to 2020................................................................. 55<br />
Maverick 1988 to 1994 (See Nissan Patrol Page 241)................................. 241<br />
Ranger Raptor Next-Gen 2022+................................................................. 56<br />
Raptor 9/2018 to 2022................................................................... 57<br />
Next-Gen 2022+............................................................................ 58<br />
PX Mk III 8/2018+.......................................................................... 62<br />
PX Mk II 2015 to 7/2018................................................................ 66<br />
PX 7/2011 to 2015......................................................................... 70<br />
PJ / PK 2006 to 2011..................................................................... 74<br />
GM / CHEVROLET / HOLDEN<br />
Colorado RG 11/2016 to 2020...................................................................... 92<br />
RG 2012 to 10/2016...................................................................... 95<br />
RC 7/2008 to 12/2012................................................................... 99<br />
Colorado 7 RG 2012+...................................................................................... 90<br />
Rodeo RA7 2007 to 7/2008..................................................................... 100<br />
RA 2002 to 2006.......................................................................... 101<br />
Silverado 1500 2019+.................................................................................. 82<br />
Trailblazer LT / LTZ 2017+............................................................................... 88<br />
GREAT WALL UTE<br />
Cannon 9/2020+...................................................................................... 104<br />
Room Enclosures ................................................................................................... 26<br />
Instant Ensuite ................................................................................................... 26<br />
DRIVING LIGHTS<br />
LED Driving Lights ................................................................................................... 27<br />
LED Lightbars ..............................................................................................28-29<br />
LED Cube Lights ................................................................................................... 30<br />
Driving Light Accessories.......................................................................................... 31<br />
Universal LED Work Lights........................................................................................ 30<br />
Light and Bull Bar Wiring Patch Looms...................................................................... 32<br />
AUTO ELECTRICAL<br />
Auto Electrical ................................................................................................... 33<br />
Dual Battery Systems............................................................................................... 33<br />
STORAGE<br />
Single Drawer Systems ............................................................................................ 34<br />
Twin Drawer Systems............................................................................................... 34<br />
Wing Kits ................................................................................................... 34<br />
Fridge Slides .............................................................................................. 21/34<br />
Water Tanks ................................................................................................... 35<br />
Maxi Cases ................................................................................................... 36<br />
Steel Truck Box ................................................................................................... 36<br />
Rooftop Tent Hanging Bag / General Camping Bag.................................................... 16<br />
ROOF RACKS<br />
Atlas Roof Racks and Accessories........................................................................37-39<br />
Alloy Roof Racks ................................................................................................... 40<br />
Steel Roof Racks ................................................................................................... 40<br />
Universal Roof Rail Extrusions................................................................................... 40<br />
Mounting Kits ................................................................................................... 40<br />
FLEET AND MINING<br />
Fleet and Mining Accessories.................................................................................... 41<br />
APPAREL<br />
T-Shirts ................................................................................................... 42<br />
Baseball Caps ................................................................................................... 43<br />
MERCHANDISE<br />
Ironman 4x4 Merchandise........................................................................................ 43<br />
ISUZU<br />
D-Max 2023+ (Facelift)........................................................................... 108<br />
8/2019 to 2022............................................................................ 108<br />
2/2017 to 7/2019......................................................................... 111<br />
6/2012 to 1/2017......................................................................... 114<br />
2007 to 6/2012............................................................................ 118<br />
MU-X 8/2021+...................................................................................... 120<br />
2013 to 7/2021............................................................................ 122<br />
2014 to 7/2021............................................................................ 122<br />
JEEP<br />
Gladiator JT 4/2019+.................................................................................. 130<br />
Grand Cherokee WK2 8/2013+.............................................................................. 132<br />
Wrangler JL 2018+..................................................................................... 136<br />
JK 2007+..................................................................................... 138<br />
LAND ROVER<br />
Defender 2007-2016.................................................................................. 145<br />
Discovery Series 2, 3 and 4.......................................................................... 150<br />
LDV<br />
T60 2.8L Turbo Diesel 2017+.............................................................. 154<br />
MAZDA<br />
BT-50 6/2020+...................................................................................... 159<br />
2012 to 5/2020............................................................................ 162<br />
J97M 2006 to 2012..................................................................... 166<br />
MITSUBISHI<br />
Pajero NW-NX 2011................................................................................ 178<br />
NM, NP, NS, NT 5/2000 to 2011.................................................... 179<br />
Pajero Sport 7/2019+...................................................................................... 174<br />
11/2016 to 6/2019....................................................................... 176<br />
4 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION<br />
Contents - Accessories to Suit<br />
ACCESSORIES TO SUIT (BY VEHICLE)<br />
MITSUBISHI - Continued<br />
Triton MR 11/2018+.............................................................................. 190<br />
MQ 2015 to 10/2018.................................................................... 194<br />
MN 2009 to 2015......................................................................... 199<br />
ML 2006 to 2009......................................................................... 202<br />
NISSAN<br />
Navara NP300 Series 5 2021+................................................................. 208<br />
NP300 2015 to 2020.................................................................... 212<br />
D40 2005+.................................................................................. 217<br />
D22 2002+.................................................................................. 220<br />
Pathfinder R51 2005 to 2013........................................................................ 224<br />
Patrol Y62 2020+.................................................................................. 230<br />
Y62 2010 to 2019........................................................................ 230<br />
Y61 GU Series 4 2005+................................................................ 232<br />
Y61 GU Series 1-3 1998 to 2004.................................................. 233<br />
Y60 GQ Station Wagon 1987 to 1997........................................... 241<br />
Y60 GQ Coil Cab 1987 to 1997..................................................... 241<br />
RAM<br />
1500 DT 6/2018+................................................................................. 251<br />
DS 2014+.................................................................................... 252<br />
RENAULT<br />
Alaskan Thai-Built Only 2017+.................................................................. 254<br />
SSANGYONG<br />
Musso Q200 10/2018+........................................................................... 257<br />
Q201 10/2018+........................................................................... 257<br />
Q205 10/2018+........................................................................... 257<br />
Q215 10/2018+........................................................................... 257<br />
Rexton Y400 10/2018+........................................................................... 262<br />
SUBARU<br />
Forester 2019+......................................................................................... 264<br />
Outback 2015+......................................................................................... 266<br />
XV Crosstrek 2018+......................................................................................... 267<br />
SUZUKI<br />
Jimny GJ 2018+.................................................................................... 268<br />
2012 to 1/2019............................................................................ 270<br />
Grand Vitara 8/2005 to 2015............................................................................ 274<br />
TOYOTA<br />
4Runner Gen 5, N280 2009+..................................................................... 278<br />
FJ Cruiser 2006+......................................................................................... 284<br />
SPARE PARTS<br />
Bull Bars ................................................................................................. 386<br />
Canopies ................................................................................................. 387<br />
Canopy / Roof Racks.............................................................................................. 390<br />
Driving Lights ................................................................................................. 390<br />
Fridges ................................................................................................. 390<br />
Instant Awnings ................................................................................................. 390<br />
Miscellaneous ................................................................................................. 394<br />
Rooftop Tents ................................................................................................. 391<br />
TOYOTA - Continued<br />
Fortuner 2015+......................................................................................... 286<br />
Hilux Rogue Wide Body 8/2022+.......................................................... 293<br />
8/2020+...................................................................................... 296<br />
Revo 5/2018 to 7/2020................................................................ 300<br />
Revo 2015 to 4/2018................................................................... 300<br />
Vigo 2011 to 2015....................................................................... 304<br />
Vigo 2005 to 2011....................................................................... 304<br />
Tiger 1997 to 2004...................................................................... 308<br />
Landcruiser 300 Series 2022+........................................................................ 312<br />
200 Series (Facelift) 11/2015+..................................................... 314<br />
200 Series 2/2012 to 10/2015..................................................... 316<br />
200 Series 11/2007 to 1/2012..................................................... 316<br />
105 Series HZJ105, FZJ105<br />
Live Axle Front Suspension 3/1998 to 10/2007........................ 318<br />
100 Series HDJ100, UZJ100<br />
Independant Front Suspension 3/1998 to 10/2007.................. 321<br />
80 Series HZJ80, FZJ80 1990 to 1998......................................... 323<br />
79 Series (V8 TD) Single Cab 9/2016+......................................... 326<br />
79 Series (V8 TD) Single Cab 2007 to 8/2016............................... 326<br />
79 Series Single Cab 1999 to 2007.............................................. 326<br />
79 Series Dual Cab 11/2012+...................................................... 329<br />
78 Series Troop Carrier 2007+..................................................... 333<br />
78 Series 1999 to 2007............................................................... 337<br />
76 Series 2007+.......................................................................... 341<br />
75 Series 1984 to 1999............................................................... 344<br />
60 Series 11/1980 to 11/1989..................................................... 350<br />
Prado 150 Series (Facelift) 11/2017+..................................................... 358<br />
150 Series 11/2013 to 10/2017................................................... 361<br />
150 Series 11/2009 to 10/2013................................................... 361<br />
120 Series 4/2003 to 10/2009..................................................... 364<br />
95 Series 1996 to 10/2002.......................................................... 366<br />
90 Series 1996 to 10/2002.......................................................... 366<br />
Rav4 2019+......................................................................................... 283<br />
Tacoma 2005+......................................................................................... 368<br />
Tundra 2022+......................................................................................... 370<br />
2013 to 2021............................................................................... 372<br />
VOLKSWAGEN<br />
Amarok 2023+......................................................................................... 378<br />
V6 11/2016 to 2022..................................................................... 380<br />
2011 to 10/2016.......................................................................... 382<br />
Slide-Away Tonneau Covers.................................................................................... 391<br />
Snorkels ................................................................................................. 392<br />
Suspension ................................................................................................. 392<br />
Swags ................................................................................................. 393<br />
Tow Bars ................................................................................................. 393<br />
Underbody Protection............................................................................................. 393<br />
Winches ................................................................................................. 393<br />
ACCESSORY INSTALLATION FITTING TIMES<br />
Approximate Accessory Fitting Times...................................................................... 396<br />
ACCESSORIES TECHNICAL SPECIFICATIONS<br />
Winches ................................................................................................. 460<br />
Bull Bars ................................................................................................. 461<br />
Rear / Tow Bars ................................................................................................. 463<br />
Side Steps / Rails ................................................................................................. 463<br />
Rated Recovery Points............................................................................................ 463<br />
Snorkels ................................................................................................. 466<br />
Underbody Protection............................................................................................. 467<br />
Roof Racks and Accessories................................................................................... 468<br />
Canopies ................................................................................................. 469<br />
Driving Lights ................................................................................................. 470<br />
LED Worklights ................................................................................................. 471<br />
LED Lightbars ................................................................................................. 472<br />
Fridge / Freezer Troubleshooting............................................................................. 474<br />
Fridge / Freezers ................................................................................................. 475<br />
Locksafe Drawer Systems...................................................................................... 476<br />
DeltaWing 270º Awnings......................................................................................... 477<br />
Rooftop Tents ................................................................................................. 478<br />
Rooftop Tent and Awning Accessories..................................................................... 479<br />
Swags ................................................................................................. 481<br />
Solar Panels ................................................................................................. 482<br />
Water Tanks ................................................................................................. 483<br />
TERMS AND CONDITIONS<br />
Terms and Conditions of Trade................................................................................ 484<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
5
ACCESSORIES AND SUSPENSION<br />
Contents - Suspension to Suit<br />
SUSPENSION TO SUIT (BY VEHICLE)<br />
DACIA<br />
Duster 2010+.......................................................................................... 46<br />
FIAT<br />
Fullback 2016+........................................................................................... 48<br />
FORD<br />
Bronco 2020+........................................................................................... 51<br />
Courier Ranger (not USA model) 1985 to 2006........................................... 75<br />
Everest Next-Gen 2022+............................................................................ 77<br />
UAII 7/2018+................................................................................. 79<br />
3.2L 2015 TO 6/2018..................................................................... 81<br />
F150 Series 14 2021+............................................................................ 53<br />
Maverick 1988 to 1994 (See Nissan Patrol Page 243)................................. 243<br />
Ranger Raptor Next-Gen 2022+................................................................. 56<br />
Raptor 9/2018 to 2022................................................................... 57<br />
Next-Gen 2022+............................................................................ 60<br />
PX Mk III (not USA model) 7/2018+................................................ 64<br />
PX Mk II (not USA model) 2015 to 6/2018....................................... 68<br />
T6 PX (not USA model) 2011 to 2015............................................. 72<br />
PJ / PK (not USA model) 3/2006 to 2011........................................ 74<br />
GM / Holden<br />
Colorado RG 2016 to 2020............................................................................ 93<br />
RG 2012 to 2016............................................................................ 96<br />
RG Low Ride 2WD 2012+.............................................................. 98<br />
RC 2003 to 2012............................................................................ 99<br />
Colorado 7 Trailblazer 2012+........................................................................... 91<br />
Frontera 1995 to 1/1999.............................................................................. 87<br />
Jackaroo Bighorn / Monterey 1992+............................................................. 84<br />
11/1986 to 1991............................................................................ 85<br />
Pre 1996........................................................................................ 86<br />
Rodeo RA 2003 to 2012.......................................................................... 100<br />
RA7 2003 to 2012........................................................................ 100<br />
KB - TFS 1988 to 3/2003............................................................. 102<br />
KB - TF 1983 to 1988................................................................... 103<br />
Silverado 1500 2019+.................................................................................. 83<br />
Trailblazer LT / LTZ 2017+............................................................................... 89<br />
GREAT WALL UTE<br />
Cannon 9/2020+...................................................................................... 105<br />
HAVAL<br />
H9 Wagon 2.0L Petrol 8/2017+......................................................... 106<br />
HYUNDAI<br />
Terracan 2001+......................................................................................... 107<br />
ISUZU<br />
D-Max 2023+ (Facelift)........................................................................... 109<br />
8/2019 to 2022............................................................................ 109<br />
2016 to 7/2019............................................................................ 112<br />
6/2012 to 1/2017......................................................................... 115<br />
Low Ride 2WD 2012+.................................................................. 117<br />
2003 to 2012............................................................................... 119<br />
MU-X 8/2021+...................................................................................... 121<br />
2014 to 7/2021............................................................................ 123<br />
Trooper 1992+......................................................................................... 124<br />
11/1986 to 1991.......................................................................... 125<br />
Pre 1986...................................................................................... 126<br />
JEEP<br />
Cherokee Liberty KK 2007 to 2012.............................................................. 127<br />
Liberty KJ 2001 to 2006............................................................... 128<br />
XJ 1984+..................................................................................... 129<br />
Gladiator JT 2019+..................................................................................... 131<br />
Grand Cherokee WK2 (4x4) 2011+......................................................................... 133<br />
WJ / WG 1999 to 6/2005.............................................................. 134<br />
ZJ / ZG 1993 to 1998................................................................... 135<br />
Wrangler JL 2018+..................................................................................... 137<br />
JK 2006+..................................................................................... 139<br />
TJ 1996 to 2/2007....................................................................... 140<br />
JMC<br />
Vigus 2014+......................................................................................... 141<br />
KIA<br />
Sorento BL 2003 to 2008.......................................................................... 142<br />
LADA<br />
Niva 1978+......................................................................................... 143<br />
LAND ROVER<br />
Defender 110 Series County / Dual Cab....................................................... 146<br />
130 Series County / Dual Cab....................................................... 146<br />
110 Series Trayback..................................................................... 147<br />
90 Series..................................................................................... 148<br />
Discovery Series 3 LR3 (Coil Springs) 2004 to 2009..................................... 151<br />
Series 2 (Coil Springs) 1999 to 2005............................................ 152<br />
Series 1 1989 to 2005................................................................. 153<br />
Range Rover (Coil Springs) 1971 to 1995.......................................................... 149<br />
LDV<br />
T60 2.8L Turbo Diesel 2017+.............................................................. 154<br />
MAHINDRA<br />
Scorpio Getaway Pik-Up 2002 to 2016..................................................... 155<br />
Wagon 2002 to 2014................................................................... 156<br />
MAZDA<br />
BT50 6/2020+...................................................................................... 160<br />
2011 to 5/2020............................................................................ 164<br />
2006 to 2011............................................................................... 167<br />
B Series Bravo 1987 to 2006............................................................................... 169<br />
MERCEDES BENZ<br />
G-Wagen W460, W461 W463 1979+ .......................................................... 170<br />
G55 AMG ..................................................................................... 171<br />
Unimog UL1700, 2450, U5000, 1300, 1550, U4000 ................................. 172<br />
X-Class 4 Cyl Models 2017 to5/2020........................................................ 173<br />
MITSUBISHI<br />
Challenger Montero Sport<br />
PA (Coil) 1998 to 2008................................................................. 187<br />
PA (Leaf) 1998 to 2006................................................................ 188<br />
Delica L400 1994+................................................................................. 189<br />
Pajero Montero NM - NX 2000+.............................................................. 180<br />
iO Pinin 1999+............................................................................. 181<br />
Montero NH - NL (Coil) 6/1991 to 2000........................................ 182<br />
Montero NH - NL (Leaf) 1991 to 1999.......................................... 183<br />
Montero NA - NG (Coil) 1988 to 1991........................................... 184<br />
Montero NA - NG (Leaf) Pre 1991................................................. 185<br />
Pajero Sport 7/2019+...................................................................................... 175<br />
2.4L Mivec 2015 to 6/2019.......................................................... 177<br />
Pajero Sport / Montero Sport / Dakar<br />
PB 2009 to 2015.......................................................................... 186<br />
Triton MR 11/2018+.............................................................................. 192<br />
MQ L200 2015 to 10/2018........................................................... 196<br />
MN L200 2009 to 2015................................................................ 200<br />
ML L200 2006 to 2009................................................................ 203<br />
MK L200 1996 to 2006................................................................ 205<br />
ME-MJ 1993 to 1996................................................................... 206<br />
L200 Pre 1983............................................................................. 207<br />
NISSAN<br />
Navara NP300 (Coil Springs) 2021+ Series 5........................................... 210<br />
NP300 (Leaf Springs) 2021+ Series 5.......................................... 211<br />
NP300 (Coil Springs) 2015 to 2020 Series 1 to 4.......................... 214<br />
NP300 (Leaf Springs) 2014 to 2020 Series 1 to 4......................... 215<br />
D40 (V6 Diesel) 2005+................................................................. 218<br />
D40 (4cyl Diesel and V6 Petrol) 2005+......................................... 219<br />
D22 / NP300 (Torsion Bar) 1997+................................................ 221<br />
D21 1985 to 1996........................................................................ 222<br />
Paladin Pre 2005...................................................................................... 223<br />
Pathfinder R51 (V6 Diesel) 7/2005+.............................................................. 225<br />
R51 (4cyl Diesel and V6 Petrol) 7/2005+...................................... 227<br />
R50 1995 to 7/2005..................................................................... 228<br />
R20 Pre 1995............................................................................... 229<br />
Patrol Y62 2010+.................................................................................. 231<br />
Y61 GU LWB Wagon...................................................................... 234<br />
Y60 GQ Cab Chassis (Coil / Coil)................................................... 238<br />
Y61 GU Cab Chassis (Coil / Coil)................................................... 238<br />
Y60 GQ Cab Chassis (Coil / Leaf).................................................. 240<br />
Y61 GU Cab Chassis (Coil / Leaf).................................................. 240<br />
Y60 GQ Cab Chassis (Leaf / Leaf) 1988+...................................... 242<br />
Y60 GQ LWB Wagon 1988 to 1998............................................... 243<br />
Y60 GQ SWB Wagon 1988 to 1998............................................... 245<br />
MK G160 (Rectangle Headlights) 1984+....................................... 247<br />
MQ G160 (Round Headlights) Pre 1984........................................ 248<br />
6 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION<br />
Contents - Suspension to Suit<br />
SUSPENSION TO SUIT (BY VEHICLE)<br />
NISSAN - Continued<br />
Terrano/II WD21 Pre 1995...................................................................................... 229<br />
Xterra 2005+......................................................................................... 249<br />
Xtrail T30 2001 to 9/2007..................................................................... 250<br />
RAM<br />
1500 DT 6/2018+................................................................................. 251<br />
DS 2014+.................................................................................... 253<br />
RENAULT<br />
Alaskan 2017+......................................................................................... 255<br />
Duster 2010+......................................................................................... 256<br />
SSANGYONG<br />
Korando 1996 to 2006............................................................................... 261<br />
Musso Q200 SWB 10/2018+................................................................... 258<br />
Q201 LWB (Coil) 10/2018+........................................................... 259<br />
Q215 LWB (Coil) 10/2018+........................................................... 259<br />
Q201 LWB (Leaf) 10/2018+.......................................................... 260<br />
Q205 LWB (Leaf) 10/2018+.......................................................... 260<br />
Q215 LWB (Leaf) 10/2018+.......................................................... 260<br />
1996 to 2006............................................................................... 261<br />
Rexton Y400 2018+................................................................................ 263<br />
Y450 2018+................................................................................ 263<br />
SUBARU<br />
Forester 2019+......................................................................................... 264<br />
SF5, GX, RX, GT 1997 to 2013...................................................... 265<br />
Outback 2015+......................................................................................... 266<br />
XV Crosstrek 2018+......................................................................................... 267<br />
SUZUKI<br />
Grand Vitara 8/2005 to 2015............................................................................ 275<br />
1988 to 7/2005............................................................................ 276<br />
Jimny GJ 2018+.................................................................................... 269<br />
SN413 1998 to 2018.................................................................... 271<br />
Sierra SJ80 (Coil) 1997+........................................................................ 272<br />
Samurai LJ, SJ (Leaf) 1981+........................................................ 273<br />
Vitara 1988+......................................................................................... 277<br />
TOYOTA<br />
4Runner Gen 4 and 5, N210 - N280 2003+................................................ 279<br />
Gen 3 N180 - N185 1996 to 2002................................................ 280<br />
Gen 2 Surf N130 V6 (Coil) 1990 to 1997....................................... 281<br />
Gen 1 N60 (Leaf) 1988 to 1997.................................................... 282<br />
Bundera 1984 to 1989............................................................................... 347<br />
FJ Cruiser 2006+......................................................................................... 285<br />
Fortuner 2015+......................................................................................... 287<br />
2004 to 2015............................................................................... 289<br />
Hiace Series 300 2019+........................................................................ 290<br />
Series 200 2005 to 2019............................................................. 291<br />
Highlander 2020+......................................................................................... 311<br />
TOYOTA - Continued<br />
Hilux Rogue Wide Body 8/2022+.......................................................... 294<br />
8/2020+...................................................................................... 298<br />
Revo 2015 to 7/2020................................................................... 302<br />
Vigo 3/2005 to 9/2015................................................................. 305<br />
Low Ride 2WD 2005+.................................................................. 307<br />
Tiger 107, 108, 110, 111 167 1997 to 2005................................. 308<br />
Solid Front Axle 11/1983 to 11/1997............................................ 309<br />
Solid Front Axle 1979 to 10/1983................................................. 310<br />
Kluger 2020+......................................................................................... 311<br />
Landcruiser 300 Series 2020+........................................................................ 313<br />
200 Series (Facelift) 11/2015+..................................................... 315<br />
200 Series 11/2007 to 10/2015+................................................. 317<br />
105 Series 1998+........................................................................ 319<br />
100 Series, IFS 1998+................................................................. 322<br />
80 Series 1990+.......................................................................... 324<br />
79 Series Single Cab 1999+........................................................ 327<br />
79 Series Dual Cab 2013+........................................................... 330<br />
78 Series 2007+.......................................................................... 334<br />
78 Series 1999 to 2007............................................................... 338<br />
76 Series 2007+.......................................................................... 342<br />
75 Series 1984 to 1999............................................................... 345<br />
71 Series (Coil / Leaf) 1999+....................................................... 348<br />
70, 73, 74 Series (Leaf / Leaf) 1984 to 1988................................ 349<br />
60 Series 1986+.......................................................................... 350<br />
60 Series Pre 1986...................................................................... 352<br />
45, 47 Series 8/1980 to 1985...................................................... 354<br />
45 Series 1960 to 1980............................................................... 355<br />
40, 42, 46 Series 1980 to 1984.................................................... 356<br />
40 Series 1960 to 1980............................................................... 357<br />
Prado 150 Series (Coil) 12/2017+.......................................................... 359<br />
150 Series (Coil) 2009 to 11/2017................................................ 362<br />
120 Series 4/2003 to 10/2009..................................................... 364<br />
90, 95 Series 1996 to 10/2002.................................................... 366<br />
II Prado 70, 73, 78 Series 1990 to 1996....................................... 346<br />
Rav4 2019+......................................................................................... 283<br />
Sequoia 2023+......................................................................................... 367<br />
Tacoma 2005+......................................................................................... 369<br />
Tundra 2022+......................................................................................... 371<br />
2006 to 2021............................................................................... 373<br />
TROLLER<br />
T4 7/2014+...................................................................................... 374<br />
1997 to 6/2014............................................................................ 375<br />
UAZ<br />
Hunter All Models.................................................................................... 376<br />
Patriot 1997+......................................................................................... 377<br />
VOLKSWAGEN<br />
Amarok 2023+......................................................................................... 379<br />
V6 / 4 Cyl 11/2016 to 2022.......................................................... 381<br />
1997 to 10/2016.......................................................................... 383<br />
SPARE PARTS<br />
Suspension ................................................................................................. 392<br />
ACCESSORY INSTALLATION FITTING TIMES<br />
Approximate Accessory Fitting Times...................................................................... 395<br />
GVM UPGRADES TO SUIT (BY VEHICLE)<br />
Everest Next-Gen 2022+....................................................................... 400<br />
Ranger Next-Gen 2022+....................................................................... 401<br />
PX Mk III (not USA model) 7/2018 to 2022................................. 402<br />
PX Mk II (not USA model) 2015 to 6/2018.................................. 402<br />
T6 PX (not USA model) 2011 to 2015........................................ 403<br />
Colorado RG 2016 to 2020....................................................................... 404<br />
RG 2012 to 2016....................................................................... 404<br />
D-Max MY20+...................................................................................... 405<br />
6/2012 to 7/2019...................................................................... 406<br />
BT50 6/2020+................................................................................... 407<br />
Navara NP300 Series 5 2022+.............................................................. 408<br />
Jimny GJ 2018+................................................................................. 409<br />
Hilux 8/2020+................................................................................... 410<br />
Revo 2015 to 4/2018................................................................ 410<br />
Vigo 3/2005 to 2015................................................................. 411<br />
Landcruiser 300 Series 2022+..................................................................... 412<br />
200 Series MC NA 2007+......................................................... 413<br />
79 Series Single Cab 2007+..................................................... 414<br />
79 Series Dual Cab 2012+........................................................ 415<br />
78 Series Troop Carrier 2007+.................................................. 416<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
7
ACCESSORIES AND SUSPENSION<br />
Contents - Suspension to Suit<br />
SUSPENSION PART SELECTION<br />
Understanding Load ............................................................................................... 418<br />
Determining Load ................................................................................................. 419<br />
Understanding Terrain............................................................................................. 420<br />
Understanding Valving ........................................................................................... 421<br />
Understanding GVM Upgrades................................................................................. 422<br />
SUSPENSION TECHNICAL SPECIFICATIONS<br />
Installation Times ................................................................................................. 436<br />
Installation Form ................................................................................................. 437<br />
Coil Springs Technical Specifications...................................................................... 438<br />
Leaf Springs Technical Specifications..................................................................... 441<br />
Torsion and Sway Bars Technical Specifications...................................................... 443<br />
Shock Absorbers - Nitro Gas Technical Specifications............................................. 444<br />
Shock Absorbers - Foam Cell Technical Specifications............................................ 446<br />
Shock Absorbers - Foam Cell Pro Technical Specifications...................................... 447<br />
Suspension Kit Selection......................................................................................... 423<br />
Shock Absorber Application Guide........................................................................... 424<br />
Features and Benefits............................................................................................. 428<br />
Load Plus Helper Springs Application Guide............................................................ 432<br />
Steering Dampers Technical Specifications............................................................. 450<br />
Shock Absorber Mount Types Technical Specifications............................................ 451<br />
Trim Packers Technical Specifications..................................................................... 452<br />
U-Bolts Technical Specifications............................................................................. 453<br />
Load Plus Helper Springs Technical Specifications.................................................. 453<br />
Suspension Rubber Arm Bush Kits Technical Specifications.................................... 454<br />
Strut Compressor ................................................................................................. 455<br />
FAQ / Troubleshooting............................................................................................. 456<br />
TERMS AND CONDITIONS<br />
Terms and Conditions of Trade................................................................................ 484<br />
8 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION<br />
Contents<br />
4WD and<br />
Touring Gear<br />
CATALOGUE<br />
Effective 1 August 2023<br />
9
4WD AND TOURING GEAR<br />
Recovery<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
E<br />
E<br />
F<br />
G<br />
H<br />
H<br />
ELECTRIC WINCHES<br />
Monster Winch 9500lb - 12V (With Steel Cable) - See below for Extension Plugs<br />
Monster Winch 12000lb - 12V (With Steel Cable) - See below for Extension Plugs<br />
Monster Winch 9500lb - 12V (With Synthetic Rope) - See below for Extension Plugs<br />
Monster Winch 12000lb - 12V (With synthetic rope) - See below for Extension Plugs<br />
WINCH ACCESSORIES<br />
Winch Control Extension Plug - 500mm Length<br />
Winch Control Extension Plug - 1000mm Length<br />
Winch Control Extension Plug - 1500mm Length<br />
Synthetic Winch Rope - 9.5mm x 27m (8100kg)<br />
Winch Damper Blanket<br />
Alloy Hawse Fairlead<br />
Steel Hawse Fairlead<br />
WWB9500<br />
WWB12000<br />
WWB9500SR<br />
WWB12000SR<br />
WWB030<br />
WWB031<br />
WWB032<br />
WWWROPE001<br />
WINCH BLANKET<br />
WWWHAWSE<br />
WWBHAWSEST<br />
TECHNICAL DIMENSIONS AND SPECIFICATIONS<br />
SEE PAGE 460<br />
A B C D<br />
E F G H<br />
HANDY TIP<br />
Make your own Recovery Kits<br />
Basic Essentials<br />
Vehicle to Vehicle<br />
Premium Essentials<br />
Vehicle to Vehicle<br />
Basic Essentials<br />
Recovery Kit<br />
Premium Essentials<br />
Recovery Kit 9.5K<br />
Premium Essentials<br />
Recovery Kit 12.5K<br />
1 x 8,000kg Snatch Strap 1 x 9,500kg Kinetic Snatch Rope 1 x 8,000kg Snatch Strap 1 x 9,500kg Kinetic Snatch Rope 1 x 12,500kg Kinetic Snatch Rope<br />
2 x 4,750kg Bow Shackles 2 x 14,000kg Soft Shackles 1 x 9,500kg Winch Extension Rope 1 x 9,500kg Winch Extension Rope 1 x 9,500kg Winch Extension Rope<br />
1 x Recovery Gloves 1 x Recovery Hitch 1 x 12,000kg Tree Saver 1 x 13,000kg Bridle Rope 1 x 13,000kg Bridle Rope<br />
1 x Small Recovery Bag 1 x Recovery Gloves 2 x 4,750k Bow Shackles 1 x Alloy Recovery Ring 1 x Alloy Recovery Ring<br />
1 x Small Recovery Bag 1 x 11,000kg Recovery Block 3 x 14,000kg Soft Shackles 3 x 18,0000kg Soft Shackles<br />
1 x Recovery Gloves 1 x Recovery Gloves 1 x Recovery Gloves<br />
1 x Large Recovery Bag 1 x Large Recovery Bag 1 x Large Recovery Bag<br />
10 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Recovery<br />
Product Description<br />
Part No.<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
O<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
U<br />
V<br />
W<br />
X<br />
Y<br />
RECOVERY STRAPS AND ACCESSORIES<br />
Aluminium Recovery Hitch - 12,500Kg Rating<br />
Bow Shackle with Protector - 4,750Kg Rating<br />
Recovery Block - 11,000kg Rating<br />
Heavy Duty Drag Chain (5m x 8mm)<br />
Aluminium Alloy Recovery Ring - 12,500Kg Rating<br />
Recovery Gloves - Kevlar and Polyester<br />
Soft Shackle with Anti-Abrasion Coating - 14,000kg Rating<br />
Soft Shackle with Anti-Abrasion Coating - 18,000kg Rating<br />
Snatch Strap - 8,000kg Rating (9m x 75mm)<br />
Kinetic Snatch Rope - 9,500kg Rating (9m)<br />
Kinetic Snatch Rope - 12,500kg Rating (9m)<br />
Winch Extension Rope - 4,500kg Rating (20m)<br />
Winch Extension Rope - 9,500kg Rating (20m)<br />
Bridle Rope with Protection Sleeve - 13,000kg Rating (3m)<br />
Tree Saver - 12,000kg Rating (3m x 75mm)<br />
Small Recovery Bag<br />
Large Recovery Bag<br />
IRECHITCH<br />
IBOW4.7K<br />
IBLOCK11K<br />
IDRAG<br />
IRECRING<br />
IRECGLOVES<br />
ISOFTSHA14K<br />
ISOFTSHA18K<br />
ISNATCH8K<br />
ISNATCHROPE9.5K<br />
ISNATCHROPE12.5K<br />
IWINCHEXT4.5K<br />
IWINCHEXT9.5K<br />
IBRIDLE13K<br />
ITREE12K<br />
IRECKIT012BAG<br />
IRECKIT023BAG<br />
I J K<br />
L<br />
M<br />
N<br />
O<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
U<br />
Y<br />
V<br />
W<br />
X<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
11
4WD AND TOURING GEAR<br />
Recovery<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
COMPRESSORS<br />
Air Champ Compressor - 12V (90L/min)<br />
Air Champ Pro Compressor - 12V (160L/min)<br />
TYRE ACCESSORIES<br />
Air Champ Extension Hose to suit Dual Inflator<br />
Air Champ Compact Deflator - While Stocks Last<br />
Speedy Deflator<br />
Speedy Deflator<br />
AirPlugger Tyre Repair Kit (Single)<br />
AirPlugger Tyre Repair Kit (12 Pack)<br />
Tyre Repair Kit<br />
Tyre Repair Cord (Refill 25pc)<br />
LIFTING JACKS<br />
4WD Lift Jack - 48” (Includes cover)<br />
DIFF BREATHER KIT<br />
Diff Breather Kit<br />
ICOMPRESSOR003<br />
ICOMPRESSOR004<br />
ITYRE008<br />
ITYRE004<br />
ISPEEDYA<br />
ISPEEDYD<br />
ITYRE009<br />
ITYRE009PROMO<br />
ITYRE001<br />
ITYRE002<br />
IHIGHLIFT001<br />
IDIFFBRE<br />
A<br />
B<br />
C<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
12 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Recovery<br />
Product Description<br />
Part No.<br />
O<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
U<br />
V<br />
W<br />
X<br />
Y<br />
Z<br />
AA<br />
BB<br />
RECOVERY BOARDS<br />
Reco-Traks - Sand (Pair)<br />
IRECBRDSAND<br />
Reco-Traks - Grey (Pair)<br />
IRECBRDGREY<br />
Reco-Traks - Green (Pair)<br />
IRECBRDGREEN<br />
Recovery Board Mounting Base<br />
IRECBRDBASE<br />
Recovery Board Mount Pins 110mm (Pair)<br />
IRECBRDPINS115<br />
Recovery Board Leash (Pair)<br />
IRECBRDLEASH<br />
ANCHOR TRACKS<br />
610mm Anchor Track<br />
ITRACK610<br />
305mm Anchor Track<br />
ITRACK305<br />
Additional Rings - Twin Pack (2Rings)<br />
ITRACKRING<br />
MULTI-PURPOSE REAR WHEEL BAG<br />
Rear Wheel Bag<br />
IRWB001<br />
SEAT COVERS<br />
Universal Seat Cover (Slip-On) - Front Only<br />
ISEAT COVER<br />
Airbag Compatible Fabric Seat Cover (Vehicle Specific) - Front<br />
See Vehicle Listing<br />
Airbag Compatible Fabric Seat Cover (Vehicle Specific) - Rear<br />
See Vehicle Listing<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats (Vehicle Specific) - Front and Rear Set<br />
See Vehicle Listing<br />
SUN SHADES<br />
Sun Screen Shade (Vehicle Specific) - Front<br />
See Vehicle Listing<br />
HI VIS SAND FLAG<br />
1m, 2m or 3m Length IHVFLAG<br />
R<br />
S<br />
T<br />
O P Q<br />
U<br />
X<br />
V<br />
W<br />
BB<br />
Y<br />
Z<br />
AA<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
13
4WD AND TOURING GEAR<br />
Camping Accessories<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
CAMP CHAIRS<br />
Quick Fold Event Chair<br />
Low Back Quad Fold Camp Chair<br />
Club Lounge Quad Fold Camp Chair<br />
King Hard Arm Camp Chair - With Lumbar Support<br />
King Quad Camp Chair - With Lumbar Support<br />
CAMP TABLES / STEPS<br />
Multi-Use Side Camp Table<br />
Aluminium Camp Table - Adjustable Height<br />
Quick-Fold Camping Steps (180kg rated)<br />
ICHAIR0012<br />
ICHAIR0034<br />
ICHAIR0045<br />
ICHAIR0067<br />
ICHAIR0056<br />
ITABLE0012<br />
ITABLE0023<br />
IQFSTEP<br />
A B C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
14 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Camping Accessories<br />
Product Description<br />
Part No.<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
O<br />
P<br />
Q<br />
R<br />
CAMP SWAGS<br />
King Single - Ridge Pole Style<br />
ISWAG0023<br />
Double - Ridge Pole Style<br />
ISWAG0034<br />
CAMP SLEEPING<br />
-5º Swag Bag Sleeping Bag ISWAGBAG<br />
PET COMFORT<br />
Large Quick Fold Dog Bed with Padded Mat (133x 68x 30cm)<br />
IPET0034<br />
Small Quick Fold Dog Bed with Padded Mat (80x 80x 25cm)<br />
IPET0023<br />
Pet Tethering System<br />
IPET0045<br />
In-Car Pet Restraint - Buckle and Leash<br />
IPET0067<br />
A-Frame Pet Swag<br />
IPET0056<br />
Quick Fold Comfort Pet Sofa Bed<br />
IPET0078<br />
Compact Dual Bowl Pet Feeder<br />
IPET0089<br />
SWAGS TECHNICAL DIMENSIONS SEE PAGE 481<br />
I<br />
J<br />
K<br />
L<br />
N<br />
M<br />
Q<br />
R<br />
O<br />
P<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
15
4WD AND TOURING GEAR<br />
Camping Accessories<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
CAMP GEAR<br />
Foldable Bush Toilet (200kg rated)<br />
Bush Toilet Replacement Biodegradable Bags (10 per pack)<br />
Ezy-Go Flush Aid Part A & B (Sold together as 2 part kit)<br />
65L Explorer Duffle Bag<br />
Rooftop Tent Hanging Bag<br />
12L Pressure Shower<br />
15L Gravity Solar Shower<br />
Rechargeable Portable Shower - Lithium<br />
IBUSHTOILET<br />
IBTBAGS<br />
ITOILETA+B<br />
IDUFBAG001<br />
ITENTBAG001<br />
ISHOWER004<br />
ISHOWER003<br />
ISHOWER001<br />
B<br />
C<br />
A<br />
D<br />
F<br />
G<br />
E<br />
I<br />
J<br />
K<br />
L<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
S<br />
LIMIT<br />
LIMIT<br />
S<br />
H<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
16 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Camping Accessories<br />
Product Description<br />
Part No.<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
O<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
U<br />
V<br />
W<br />
X<br />
CAMP TOOLS<br />
3 Piece Shovel (Incl. Carry Bag) (opposite page) ISHOVEL001<br />
Tent Peg Mallet (opposite page) - While Stocks Last<br />
IMALLET<br />
0.7Kg (1.5lb) Axe (opposite page) - While Stocks Last<br />
IAXE002<br />
2.0Kg (4.4lb) Axe Splitter (opposite page) - While Stocks Last<br />
IAXE001<br />
CAMP KITCHEN<br />
26 Piece Camp Kitchen Set IKITCHEN0012<br />
12V Portable Oven with Racks and Tray<br />
IOVEN0012<br />
Portable Fire Pit System<br />
IFIREPIT0012<br />
Rotisserie Kit to Suit Fire Pit System<br />
IFIREPIT0023<br />
Collapsible Washing Tub - 8.5L<br />
ITUB0012<br />
Collapsible Dish Rack with Tray - 8.5L<br />
IDISH0012<br />
Collapsible Bin with Lid - 8L<br />
IBIN0012<br />
Collapsible Storage Tub with Lid - 45L<br />
ISTORE0023<br />
Collapsible Storage Tub with Lid - 30L<br />
ISTORE0012<br />
Collapsible Silicone Kettle - Food Grade (1.5L) - While Stocks Last<br />
IKETTLE001<br />
Collapsible Bucket with Handle - 10L<br />
IBUCKET0012<br />
CLEANING<br />
500ml Gritty Hand Wash (RRP only)<br />
IHCLEAN<br />
500ml Gritty Hand Wash (Box of 6 only)<br />
IHCLEAN BOX<br />
M<br />
N<br />
O<br />
R<br />
P<br />
Q<br />
S<br />
T<br />
V<br />
W<br />
W<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
U<br />
Stock<br />
Stock<br />
17
4WD AND TOURING GEAR<br />
Camp Lighting<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
LIGHTING<br />
Rechargeable LED Dual Spot and Area Light - While Stocks Last<br />
LED Area Light - While Stocks Last<br />
LED Area Light Tripod Stand<br />
Rechargeable LED Utility Light (RRP)<br />
Rechargeable LED Utility Light - With Countertop Display (9 Units)<br />
Rechargeable LED Worklight Combo<br />
Rechargeable LED Worklight 500 Lumen<br />
Rechargeable LED lantern 1000 Lumen<br />
Rechargeable LED Lantern and Bug Zapper<br />
Rechargeable Hi-Flow Tent Fan and LED Light<br />
Rechargeable LED Headlamp<br />
Rechargeable Bluetooth Speaker with LED Light<br />
LED Light Strip (Includes switch)<br />
Awning 12V LED Sail Track Light Strip and Dimmer Set<br />
LED Dimmer<br />
ILIGHTING0045<br />
IAREALED001<br />
IAREATRIPOD<br />
ILIGHTING0078<br />
ILIGHTING0078CD<br />
ILIGHTING0023<br />
ILIGHTING0056<br />
ILIGHTING0012<br />
ILANTERN004<br />
ITENTFAN003<br />
ILIGHTING0067<br />
ILIGHTING0034<br />
ILEDSTRIP<br />
IAWNINGPART006<br />
ILEDDIMMER<br />
A<br />
D<br />
E<br />
F<br />
B<br />
C<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
G<br />
H<br />
I<br />
L<br />
J<br />
M<br />
N<br />
K<br />
18 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Camp Solar / Power<br />
Product Description<br />
Part No.<br />
O<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
U<br />
V<br />
W<br />
X<br />
Y<br />
CAMPING SOLAR PANEL KITS<br />
160W Solar Panel Kit - Aluminium Framed Ridged with Junction Box<br />
210W Solar Panel Kit - Aluminium Framed Ridged with Junction Box<br />
110W Solar Panel Kit - Semi Flexible Ridged with Wired Connectors<br />
150W Solar Panel Kit - Semi Flexible Ridged with Wired Connectors<br />
120W Solar Panel Kit - Folding<br />
200W Solar Panel Kit - Folding<br />
CAMPING SOLAR PANEL ACCESSORIES<br />
Wiring Kit for all Solar Panels - 7m with MC4 Connectors / Red and Black<br />
Connector Kit - 30cm MC4 Twin Pack with Male and Female MC4 Plugs<br />
Connector Kit - 30cm 50A Anderson to MC4 with Male and Female MC4 Plugs<br />
Mounting Brackets - Suits Rigid Solar Panels (4 piece)<br />
MPPT Regulator - 20A Suits Lithium / AGM / Wet and Dry Cell<br />
CAMPING POWER<br />
Titan 500Power Station 51Ah (220-240Vac) - Aust Only<br />
Titan 500Power Station 51Ah (100-120Vac) - USA Only<br />
Titan 500Power Station 51Ah (220-240Vac) - <strong>International</strong> Only*<br />
Portable Battery Box with DC Outlets<br />
*Includes AC Plug Adaptor<br />
ISOLAR160WR<br />
ISOLAR210WR<br />
ISOLAR110WF<br />
ISOLAR150WF<br />
ISOLAR120<br />
ISOLAR200<br />
ISOLAR0012<br />
ISOLAR0023<br />
ISOLAR0034<br />
ISOLAR0045<br />
ISOLAR20AMPPT<br />
IPOWER0012<br />
IPOWER0023<br />
IPOWER0034<br />
IBATTBOX0012<br />
SOLAR TECHNICAL SPECIFICATIONS SEE PAGE 482<br />
O P Q R<br />
S<br />
T<br />
U<br />
Y<br />
V W X<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
19
4WD AND TOURING GEAR<br />
Fridge / Freezers<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
FRIDGE / FREEZERS<br />
40L Fridge / Freezer - While Stocks Last<br />
50L Fridge / Freezer - While Stocks Last<br />
43L M-Series Metal Fridge / Freezer - Single Zone<br />
65L M-Series Metal Fridge / Freezer - Dual Zone<br />
70L M-Series Metal Fridge / Freezer - Single Zone<br />
40L Drawer Fridge<br />
IFRIDGE40<br />
IFRIDGE50<br />
IFRIDGE43LM<br />
IFRIDGE65LDZM<br />
IFRIDGE70LM<br />
IFRIDGE40LMDR<br />
TECHNICAL DIMENSIONS, SPECIFICATIONS<br />
AND FRIDGE TROUBLESHOOTING - SEE PAGE 474<br />
A<br />
B<br />
C<br />
Features Include<br />
- Smart phone app<br />
- SECOP compressor<br />
- In-built AC/DC power<br />
- Digital display<br />
- Protective cover<br />
D<br />
E<br />
F<br />
20 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Fridge / Freezer Accessories<br />
Product Description<br />
Part No.<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
FRIDGE / FREEZER SLIDES<br />
Fridge Slide - 30L, 40L, 50L (Inc. 4 x straps) - While Stocks Last<br />
Fridge Slide - 65L, 70L (Inc. 4 x straps)<br />
Fridge Slide - 30 to 50L - Tilt (Inc. 4 x straps)<br />
Fridge Slide - 65 to 70L - Tilt (Inc. 4 x straps)<br />
FRIDGE / FREEZER ACCESSORIES (BAGS SOLD SEPARATELY)<br />
40L Fridge Bag - While Stocks Last<br />
50L Fridge Bag - While Stocks Last<br />
Fridge Straps<br />
Wireless LCD Fridge Thermometer<br />
IFRIDGESLIDE001<br />
IFRIDGESLIDE023<br />
IFRIDGESLIDE034<br />
IFRIDGESLIDE045<br />
IFRIDGE40 BAG<br />
IFRIDGE50 BAG<br />
IFRIDGE STRAPS<br />
IWFT001<br />
FRIDGE SLIDE TECHNICAL DIMENSIONS<br />
SEE PAGE 475<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
21
4WD AND TOURING GEAR<br />
Camping<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
ROOFTOP TENTS<br />
Soft Rooftop Tent<br />
Uber Lite Rooftop Tent<br />
Swift 1400 Rooftop Tent - Aluminium Hardtop<br />
Nomad 1300 Rooftop Tent - ABS Hardtop<br />
ROOFTOP TENT AWNINGS AND ANNEX<br />
Soft Rooftop Tent - Annex<br />
Nomad 1300 Rooftop Tent - Front Extension Awning Kit<br />
ACCESSORIES<br />
Soft Rooftop Tent - Annex Extension Kit (Room 200mm)*<br />
Soft Rooftop Tent Ladder Extension Kit (500mm)*<br />
Rooftop Tent - Sail Track Hanging Bag<br />
* Required for tent bases sitting above 1.8m from ground.<br />
IROOFTENT TENT<br />
IRTT0034<br />
IRTT0012<br />
IRTT0023<br />
IROOFTENT ANNEX<br />
IRTTAWN0023<br />
IROOFTENT003<br />
IROOFTENT002<br />
ITENTBAG001<br />
ROOFTOP TENTS DIMENSIONS - SEE PAGE 478<br />
A<br />
E<br />
G<br />
F<br />
B<br />
A<br />
22 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Camping<br />
Product Description<br />
Part No.<br />
C<br />
D<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
23
4WD AND TOURING GEAR<br />
Camping<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
DELTAWING AWNINGS AND ACCESSORIES<br />
DeltaWing XT-71 Awning (LHS) Supported - 2.0m (L)<br />
DeltaWing XT-71 Awning (RHS) Supported - 2.0m (L)<br />
DeltaWing XTR-71 Awning (LHS) Unsupported - 2.0m (L)<br />
DeltaWing XTR-71 Awning (RHS) Unsupported - 2.0m (L)<br />
DeltaWing XTR-143 Awning (LHS) Unsupported - 2.0m (L) *<br />
DeltaWing XTR-143 Awning (RHS) Unsupported - 2.0m (L) *<br />
* Includes additional Awning Wall as a standard<br />
• All include inclement weather stabilisation poles and guy ropes<br />
IAWN270L034<br />
IAWN270R034<br />
IAWN270L023<br />
IAWN270R023<br />
IAWN270L012<br />
IAWN270R012<br />
DELTAWING 270º AWNINGS<br />
DIMENSIONS - SEE PAGE 477<br />
A<br />
B<br />
DELTAWING ECLIPSE 270<br />
DELTAWING PRO 270<br />
A<br />
B<br />
DELTAWING 270<br />
Tubular support arms<br />
C-Channel aluminium support arms †<br />
A<br />
B<br />
Integrated support legs required for use<br />
Integrated support legs if required<br />
† C-Channel Triple LED Light Kit Sold Separately (IAWNLED270012)<br />
24 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Camping<br />
Product Description<br />
Part No.<br />
D<br />
E<br />
F<br />
G<br />
H<br />
DELTAWING AWNING ACCESSORIES<br />
DeltaWing XTR-143 Awning Wall Kit (LHS) - 3 Piece (suits IAWN270L012)<br />
DeltaWing XTR-143 Awning Wall Kit (RHS) - 3 Piece (suits IAWN270R012)<br />
DeltaWing XT-71 and XTR-71 Awning Wall Kit - 2 Piece Door and Wall<br />
DeltaWing XT-71 and XTR-71 Awning Wall Kit - 2 Piece Wall Only<br />
Awning Camp Organiser<br />
DeltaWing XTR-143 and XTR-71 Awning LED Light Kit<br />
IAWNWALL27012<br />
IAWNWALL27045<br />
IAWNWALL27023<br />
IAWNWALL27034<br />
IAWNORG012<br />
IAWNLED270012<br />
C<br />
DELTAWING ECLIPSE 270<br />
*Additional support poles and guy ropes are required and sold separately (IAWNINGPART009)<br />
DELTAWING PRO 270<br />
D<br />
E<br />
DELTAWING 270<br />
F<br />
G<br />
H<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
25
4WD AND TOURING GEAR<br />
Camping<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
INSTANT AWNINGS AND ACCESSORIES<br />
Instant Awning 1.4m (L) x 2.0m (Out) (Inc. Brackets and LED Strip)<br />
Instant Awning 2m (L) x 2.5m (Out) (Inc. Brackets and LED Strip)<br />
Instant Awning 2.5m (L) x 2.5m (Out) (Inc. Brackets and LED Strip)<br />
Awning Xtra Weathershield (Suits 2m Wide Awning) - 2m A x 2.4m B x 1.4m C<br />
Awning Xtra Weathershield (Suits 2.5m Wide Awning) - 2m A x 2.4m B x 1.4m C<br />
Awning Quick Release Bracket Kit<br />
Awning Quick Release Extra Hooks Kit<br />
AWNING ROOMS, ENCLOSURES AND ACCESSORIES<br />
Awning Room with Fly Screen Netting (Suits 2m Awning IAWNING2M)<br />
Awning Room with Fly Screen Netting (Suits 2.5m Awning IAWNING2.5M)<br />
Instant Ensuite 1m x 1m<br />
Awning Pole Kit (2x Poles, Ropes and Pegs to suit Awning Rooms)<br />
IAWNING1.4M<br />
IAWNING2M<br />
IAWNING2.5M<br />
IAWNING2MWALL<br />
IAWNING2.5MWALL<br />
IAWNINGQR<br />
IAWNINGQR HOOK<br />
IAWNING2MROOM<br />
IAWNING2.5MROOM<br />
IENSUITE<br />
IAWNINGPART009<br />
AWNINGS AND ACCESSORIES DIMENSIONS<br />
SEE PAGE 480<br />
A<br />
B<br />
C<br />
A<br />
B<br />
D<br />
E<br />
C<br />
26 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
LED Driving Lights<br />
Product Description<br />
Part No.<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
P<br />
LED DRIVING LIGHTS<br />
150W Scope 9” Combo LED - Driving Light (Each)<br />
150W Scope 9” Spot LED - Driving Light (Each)<br />
100W Scope 7” Combo LED - Driving Light (Each)<br />
100W Scope 7” Spot LED - Driving Light (Each)<br />
102W Meteor 9” LED with Daytime Running Light - Driving Light (Each)<br />
48W Meteor 7” LED with Daytime Running Light - Driving Light (Each)<br />
48W Blast Phase II 7” Combo LED - Driving Light (Each)<br />
48W Blast Phase II 7” Spot LED - Driving Light (Each)<br />
99W 5x7 Eclipse LED with Side Shooters - Driving Light (Each)<br />
IDL0901C<br />
IDL0901S<br />
IDL0701C<br />
IDL0701S<br />
ILED9M<br />
ILED7M<br />
ILEDBLAST2C<br />
ILEDBLAST2S<br />
ILED5X7<br />
TECHNICAL DIMENSIONS AND SPECIFICATIONS<br />
SEE PAGE 470<br />
DRIVING LIGHTS<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K L M<br />
P<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
27
4WD AND TOURING GEAR<br />
LED Lightbars<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
O<br />
P<br />
Q<br />
LED LIGHTBARS<br />
30W Bright Sabre-X Single Row Slim Lightbar 177mm (7”) Straight<br />
105W Bright Sabre-X Single Row Slim Lightbar 522mm (20”) Straight<br />
120W Bright Sabre-X Single Row Slim Lightbar 591mm (23”) Straight<br />
165W Bright Sabre-X Single Row Slim Lightbar 798mm (32”) Straight<br />
210W Bright Sabre-X Single Row Slim Lightbar 1005mm (40”) Straight<br />
270W Bright Sabre-X Single Row Slim Lightbar 1281mm (50”) Straight<br />
75W Bright Sabre Single Row Lightbar 524mm (20”) Straight<br />
120W Bright Sabre Single Row Lightbar 812mm (32”) Straight<br />
150W Bright Sabre Single Row Lightbar 1004mm (40”) Straight<br />
200W Bright Sabre Dual Row Lightbar 561mm (21.5”) Straight<br />
300W Bright Sabre Dual Row Lightbar 815mm (32”) Straight<br />
400W Bright Sabre Dual Row Lightbar 1076mm (42.5”) Straight<br />
300W Bright Sabre Multi-Function Dual Row Lightbar 815mm (32”) Straight<br />
400W Bright Sabre Multi-Function Dual Row Lightbar 1076mm (42.5”) Straight<br />
180W Night Sabre Lightbar 942mm (37”) Curved - While Stocks Last<br />
135W Night Sabre Lightbar 722mm (28.5”) Curved - While Stocks Last<br />
90W Night Sabre Lightbar 500mm (19.5”) Curved - While Stocks Last<br />
ILBSR005B<br />
ILBSR003B<br />
ILBSR2340<br />
ILBSR002B<br />
ILBSR001B<br />
ILBSR000B<br />
ILBSR003BW<br />
ILBSR002BW<br />
ILBSR001BW<br />
ILBDR003B<br />
ILBDR002B<br />
ILBDR001B<br />
ILBDR002BM<br />
ILBDR001BM<br />
ILBSR001C<br />
ILBSR002C<br />
ILBSR003C<br />
BRIGHT SABRE-X SINGLE ROW LED SLIM LIGHTBARS<br />
A<br />
B<br />
C<br />
CODE Beam LEDs Watts A B C<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
ILBSR005B Combo 6 30W 177mm 54mm 40mm<br />
ILBSR003B Combo 21 105W 522mm 54mm 40mm<br />
ILBSR2340 Combo 24 120W 591mm 54mm 40mm<br />
ILBSR002B Combo 33 165W 798mm 54mm 40mm<br />
ILBSR001B Combo 42 210W 1005mm 54mm 40mm<br />
ILBSR000B Combo 54 270W 1281mm 54mm 40mm<br />
BRIGHT SABRE SINGLE ROW LED LIGHTBARS<br />
A<br />
B<br />
C<br />
CODE Beam LEDs Watts A B C<br />
ILBSR003BW Combo 15 75W 524mm 66.5mm 52mm<br />
G<br />
H<br />
I<br />
ILBSR002BW Combo 24 120W 812mm 66.5mm 52mm<br />
ILBSR001BW Combo 30 150W 1004mm 66.5mm 52mm<br />
TECHNICAL DIMENSIONS<br />
AND SPECIFICATIONS SEE PAGE 472<br />
28 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
LED Lightbars<br />
Product Description<br />
Part No.<br />
BRIGHT SABRE DUAL ROW LED LIGHTBARS<br />
A<br />
B<br />
C<br />
CODE Beam LEDs Watts A B C<br />
ILBDR003B Combo 40 200W 561mm 67mm 70mm<br />
J<br />
K<br />
L<br />
ILBDR002B Combo 60 300W 815mm 67mm 70mm<br />
ILBDR001B Combo 80 400W 1076mm 67mm 70mm<br />
BRIGHT SABRE DUAL ROW MULTI-FUNCTION LED LIGHTBARS<br />
A<br />
B<br />
C<br />
M<br />
N<br />
CODE Beam LEDs Watts A B C<br />
ILBDR002BM Combo 60 300W 815mm 70mm 67mm<br />
Interspersed Multi-Function LEDs - 45 White LEDs / 60 Amber LEDs<br />
ILBDR001BM Combo 80 400W 1076mm 70mm 67mm<br />
Interspersed Multi-Function LEDs - 60 White LEDs / 75 Amber LEDs<br />
NIGHT SABRE SINGLE ROW LED LIGHTBARS<br />
A<br />
B<br />
C<br />
CODE Beam LEDs Watts A B C<br />
CURVED BAR<br />
Curved Bar<br />
ILBSR003C Spot 18 90W 500mm 63mm 54mm<br />
O<br />
P<br />
Q<br />
ILBSR002C Spot 27 135W 722mm 63mm 54mm<br />
ILBSR001C Spot 36 180W 942mm 63mm 54mm<br />
TECHNICAL DIMENSIONS<br />
AND SPECIFICATIONS SEE PAGE 472<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
29
4WD AND TOURING GEAR<br />
Bull Bar Lights/Upgrades and LED Work Lights<br />
Product Description<br />
DATE AVAILABLE<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
A<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
N<br />
O<br />
BULL BAR LIGHTS AND UPGRADES<br />
20W LED Cube Light Spot Beam - 70 x 64mm (Each) - Clear<br />
20W LED Cube Light Spot Beam - 70 x 64mm (Each) - Amber<br />
20W LED Cube Light Flood Beam - 70 x 64mm (Each) - Clear<br />
20W LED Cube Light Flood Beam - 70 x 64mm (Each) - Amber<br />
20W LED Cube Light Flood Beam - 70 x 64mm (Each) - Red<br />
40W LED Cube Light Spot Beam - 81 x 75mm (Each) - Clear<br />
40W LED Cube Light Spot Beam - 81 x 75mm (Each) - Amber<br />
40W LED Cube Light Flood Beam - 81 x 75mm (Each) - Clear<br />
40W LED Cube Light Flood Beam - 81 x 75mm (Each) - Amber<br />
20W LED Indicator / Parker Cube Light - 70 x 64mm (Each) - Combination<br />
10W 2" Fog Light (Pair) - Clear<br />
10W 2" Fog Light (Pair) - Amber<br />
10W Halogen lamp LED replacement to suit Ironman 4x4Bull Bar Light Pod (Pair)<br />
Bull Bar LED Parker / Indicator / Daytime Running Light (Pair)<br />
LED WORK LIGHTS<br />
30W Universal 3” with Side Shooters (Each)<br />
61W Universal 5” with Side Shooters (Each)<br />
20W Cosmo Dual LED Light (Each)<br />
10W Spot Beam Universal LED Work Light - 93mm (Each) - Clear<br />
10W Flood Beam Universal LED Work Light - 93mm (Each) - Amber<br />
9W Flood Beam LED Rock Light - 77 x 44mm (Each) - Clear<br />
ILED20B<br />
ILED20BA<br />
ILED20BF<br />
ILED20BFA<br />
ILED20BFR<br />
ILED80B<br />
ILED80BA<br />
ILED80BF<br />
ILED80BFA<br />
ILED20TURNPARK<br />
IFL0201W<br />
IFL0201A<br />
BBPART031<br />
BBPART002<br />
ILEDUNI3<br />
ILEDUNI5<br />
ILEDCOSMO<br />
ILEDWL10<br />
ILEDWL10FA<br />
IRL120B<br />
CUBE LIGHTS<br />
BULL BAR UPGRADE LIGHTS<br />
A<br />
B<br />
C<br />
D<br />
E F G<br />
H<br />
TECHNICAL DIMENSIONS AND SPECIFICATIONS<br />
SEE PAGE 471<br />
I<br />
LED WORK LIGHTS<br />
J K L<br />
M<br />
N<br />
O<br />
30 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Lights Accessories<br />
Product Description<br />
Part No.<br />
LIGHTBAR ACCESSORIES<br />
P<br />
ROCK LIGHT ACCESSORIES<br />
Q<br />
CUBE LIGHT COVERS<br />
R S<br />
T<br />
U V W<br />
DRIVING LIGHT COVERS<br />
X<br />
Y<br />
Z AA BB CC<br />
P<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
U<br />
V<br />
W<br />
X<br />
Y<br />
X<br />
Y<br />
Z<br />
AA<br />
BB<br />
CC<br />
LIGHTBAR ACESSORIES<br />
Lightbar Clamp Kit to suit BBC Bull Bars - 49mm<br />
Lightbar Clamp Kit to suit BBP Bull Bars - 61mm<br />
ROCK LIGHT ACCESSORIES<br />
Angled Mounting Pads (Each)<br />
CUBE LIGHT COVERS - 40W<br />
Cube Light 40W - Clear<br />
Cube Light 40W - Black<br />
Cube Light 40W - Amber<br />
Cube Light 40W - Blue<br />
Cube Light 40W - Green<br />
Cube Light 40W - Red<br />
LED DRIVING LIGHT COVERS<br />
Scope 7” - Black<br />
Scope 7” - Amber<br />
Scope 9” - Black<br />
Scope 9” - Amber<br />
Blast 7” - Clear<br />
Blast 7" - Black<br />
Blast 7” - Amber<br />
Blast 7” - Blue<br />
ILBCK049<br />
ILBCK061<br />
IRL120ANGLEPAD<br />
ILED80CVRCLEAR<br />
ILED80CVRBLACK<br />
ILED80CVRAMBER<br />
ILED80CVRBLUE<br />
ILED80CVRGREEN<br />
ILED80CVRRED<br />
IDL070COVERS<br />
IDL070COVERSAMB<br />
IDL090COVERS<br />
IDL090COVERSAMB<br />
ILCB7CLEAR<br />
ILCB7BLACK<br />
ILCB7AMBER<br />
ILCB7BLUE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
31
4WD AND TOURING GEAR<br />
Wiring Patch Looms<br />
Product Description<br />
Part No.<br />
LIGHT WIRING LOOMS<br />
Megatom Wiring Loom - Suits Set of Two (2) Megatom Lights - While Stocks Last<br />
Lightbar Patch Loom<br />
Driving Light (7”) Patch Loom Suits Scope<br />
Driving Light (9”) Patch Loom Suits Scope<br />
Lightbar Roof Extension (2.5m)<br />
Lightbar Patch Loom to 2 x 7" Driving Lights (3pin)<br />
Lightbar Patch Loom to 2 x Driving Lights (2pin) Suits Meteor / Blast<br />
Cube Light Patch Loom<br />
Strip Light Patch Loom (Park/Indicator) Pair<br />
DRIVING LIGHT/LIGHTBAR PATCH WIRING LOOMS TO SUIT<br />
Ford F-150 Series 14 2021+<br />
Ford PX Ranger / Everest 2011-2022<br />
Ford Next-Gen Ranger / Everest 2022+<br />
Ford Next-Gen Raptor 2022+<br />
Holden Colorado 2016-2020<br />
Isuzu D-Max 2019+<br />
Isuzu MU-X 2021+<br />
Jeep Gladiator / Wrangler 2018-2019<br />
Mazda BT50 2020+<br />
Mitsubishi Triton MR 2018+<br />
Nissan Navara NP300 Series 1-4 2015-2020<br />
Nissan Patrol Y62 Series 5 2019+<br />
Ram 1500 DT 2019+<br />
Ssangyong Musso Q250 2022+<br />
Toyota Hilux Rogue Wide Body 2022+<br />
Suzuki Jimny 2018+<br />
Toyota Hilux N80 Narrow Body 2020+<br />
Toyota Landcruiser 300 Series 2022+<br />
Toyota Prado 150 2017+<br />
<strong>Vol</strong>kswagen Amarok 2016-2022<br />
BULL BAR PATCH WIRING LOOMS TO SUIT<br />
Ford PXIII Ranger / Everest 2018-2022<br />
Ford PXIII Ranger - Parking Sensor Extension Loom 2018-2020<br />
Ford Next-Gen Ranger / Raptor / Everest 2022+<br />
GM/Chevrolet 1500 / 2500 2019+<br />
Great Wall Cannon 2020+<br />
Mitsubishi Pajero Sport 2016+<br />
Mitsubishi Triton MR 2018+<br />
Nissan Navara NP300 Series 5 High Spec Headlight 2021+<br />
Nissan Navara NP300 Series 5 Low Spec Headlight 2021+<br />
Nissan Patrol Y62 Series 5 2019+<br />
Ram 1500 DT 2019+<br />
Ssangyong Musso Q250 2022+<br />
Toyota Hilux Rogue Wide Body 2022+<br />
Suit Toyota Hilux 2020+<br />
Toyota Landcuiser 300 Series 2022+<br />
Toyota Landcuiser 300 Series - Parking Sensor Extension Loom 2022+<br />
<strong>Vol</strong>kswagen Amarok 2016-2022<br />
IWHL004<br />
ILBWL001<br />
IDLWL001<br />
IDLWL002<br />
IDLWL003R<br />
IDLWL004E<br />
IDLWL006M<br />
IDLWL007C<br />
IBBPL001P<br />
IPLS109<br />
IPLS066<br />
IPLS110<br />
IPLS111<br />
IPLS057<br />
IPLS074<br />
IPLS095<br />
IPLS077<br />
IPLS074<br />
IPLS067<br />
IPLS048<br />
IPLS084<br />
IPLS085<br />
IPLS088<br />
IPLS099<br />
IPLS070<br />
IPLS076<br />
IPLS090<br />
IPLS064<br />
IPLS060<br />
IBBPL066<br />
IBBPSL066<br />
IBBPL110<br />
IBBPL087<br />
IBBPL083<br />
IBBPL079<br />
IBBPL067<br />
IBBPL082<br />
IBBPL082L<br />
IBBPL084<br />
IBBPL085<br />
IBBPL088<br />
IBBPL099<br />
IBBPL076<br />
IBBPL090<br />
IBBPSL090<br />
IBBPL060<br />
32 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Auto Electrical / Dual Battery Systems<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
AUTO ELECTRICAL<br />
40A DC to DC Battery Charger with Solar Input (Not comp. with IDCDCSA Start Assist)<br />
40A DC to DC Battery Charger (80A when combined with Start Assist Kit)<br />
Start Assist Booster Kit (Suits IDCDC40 Only)<br />
12V Digital Battery Monitor (Suits single and dual battery setups)<br />
140A Battery Manager (Only)<br />
275A Battery Manager (Only)<br />
Dual Battery Loom<br />
Universal Fit Battery Tray for Ute Tubs<br />
Electric Brake Controller (With Remote Head)<br />
50A Charge Wire Kit (6m x 8mm High Current Cable)<br />
IDCDCSOLAR<br />
IDCDC40<br />
IDCDCSA<br />
IDBM001<br />
DB140<br />
DB270<br />
DB LOOM<br />
IBTRAYTUB<br />
IEBC001<br />
IAPKIT<br />
A<br />
B<br />
C<br />
D E F<br />
G<br />
H<br />
I<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
33
4WD AND TOURING GEAR<br />
Storage - Locksafe Drawer Systems<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
LOCKSAFE SINGLE DRAWERS<br />
Single Drawer - 900mm<br />
Single Drawer - 1000mm<br />
Single Drawer - 1300mm<br />
LOCKSAFE TWIN DRAWERS<br />
Twin Drawers - 900mm<br />
Twin Drawers - 1000mm<br />
Twin Drawers - 1300mm<br />
WING KITS*<br />
Left and Right Pair - 900mm<br />
Left and Right Pair - 1000mm<br />
Left and Right Pair - 1300mm<br />
FRIDGE / FREEZER SLIDES<br />
Fridge Slide - 30L, 40L, 50L (Inc. 4 x straps)<br />
Fridge Slide - 65L, 74L (Inc. 4 x straps)<br />
Fridge Slide - 65L, 74L (Inc. 4 x straps)<br />
Fridge Slide - 30 to 50L - Tilt (Inc. 4 x straps)<br />
Fridge Slide - 65 to 70L - Tilt (Inc. 4 x straps)<br />
ISD900<br />
ISD1000<br />
ISD1300<br />
ITD900<br />
ITD1000<br />
ITD1300<br />
Vehicle Specific<br />
Vehicle Specific<br />
Vehicle Specific<br />
IFRIDGESLIDE001<br />
IFRIDGESLIDE002<br />
IFRIDGESLIDE023<br />
IFRIDGESLIDE034<br />
IFRIDGESLIDE045<br />
TECHNICAL DIMENSIONS AND SPECIFICATIONS SEE PAGE 476<br />
REFER TO VEHICLE LISTING PAGES FOR SPECIFIC MODEL COMPATIBILITY / SUITABILITY<br />
A<br />
G<br />
B<br />
*Designed to suit factory tubs, will not suit tub liner without modification<br />
34 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Storage - Water Tanks<br />
Product Description<br />
Part No.<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K<br />
L<br />
M<br />
WATER TANKS - L X D X H (*INCLUDES HEIGHT OF SCREW CAP)<br />
20L Jerry Can with Tap - (350 x 170 x 460mm)<br />
IWT001<br />
40L Double Jerry Can with Barbed Outlet - (465 x 340 x 335mm)<br />
IWT002<br />
40L Vertical Tank with Barbed Outlet - (1100 x 75 x 700mm*)<br />
IWT003<br />
50L Roof Rack Tank with Barbed Outlet - (1200 x 600 x 120mm*)<br />
IWT004<br />
50L Wheel Arch Tank with Barbed Outlet - (1215 x 120 x 590mm*)<br />
IWT005<br />
50L Tapered Tank with Tap and Barbed Outlet - (1050 x 200 x 390mm*)<br />
IWT006<br />
60L Tank with Tap and Barbed Outlet - (845 x 360 x 270mm*)<br />
IWT007<br />
1.5m Plastic Water Hose Kit - Connects to barbed outlet on tanks IWTHOSE<br />
15L Under Tray Hand Wash Tank with Tap - (345 x 255 x 305mm)<br />
IWT008<br />
30L Mountable Water Tank - 12V Power - With Accessories (1610 x 190 x 130mm)<br />
IWT009<br />
WATER PUMP<br />
Pressure Water Pump - 12.5L / 12VDC<br />
IWP0023<br />
E<br />
TECHNICAL DIMENSIONS<br />
SEE PAGE 483<br />
G<br />
H<br />
I<br />
F<br />
C<br />
K<br />
D<br />
J<br />
L<br />
Hand Wash not included<br />
M<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
35
4WD AND TOURING GEAR<br />
Storage - Plastic / Metal<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
MAXI CASES - L X D X H<br />
48L - 410 x 410 x 410mm - *Does not include removable tool tray<br />
60L - 550 x 460 x 335mm (Includes tool tray)<br />
65L - 900 x 460 x 250mm - *Does not include removable tool tray<br />
100L - 700 x 460 x 410mm (Includes tool tray)<br />
140L - 915 x 460 x 440mm (Includes tool tray)<br />
216L - 1300 x 460 x 460mm (Includes tool tray)<br />
Removable Tool Tray (DIMENSIONS)<br />
STEEL TOOL BOXES - L X D X H<br />
Steel Truck Box - 700 x 640 x 750mm<br />
Steel Truck Box - 1210 x 640 x 750mm<br />
IMC001<br />
IMC002<br />
IMC006<br />
IMC003<br />
IMC004<br />
IMC005<br />
IMCTRAY<br />
ITB005<br />
ITB006<br />
G<br />
B<br />
D<br />
E<br />
A<br />
F<br />
C<br />
H<br />
I<br />
L IMITE D<br />
STOCK<br />
LIMITED<br />
Stock<br />
LIMITED<br />
Stock<br />
LIMITED<br />
Stock<br />
LIMITED<br />
Stock<br />
36 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Atlas Roof Racks and Accessories<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
PLATFORMS - ASSEMBLED<br />
Platform A - 1240 x 1530mm<br />
Platform B - 1380 x 1530mm<br />
Platform E - 1240 x 2130mm<br />
Platform G - 1570 x 1390mm<br />
Platform K - 1240 x 1390mm<br />
Platform N - 1380 x 2130mm<br />
Platform S - 1485 x 1390mm<br />
ROOF RACK BLADES<br />
To Suit Ford Next-Gen Everest - Ambiente, Trend and Sport<br />
To Suit Ford Next-Gen Everest - Platinum<br />
To Suit Ford Next-Gen Ranger Wildtrak - Dual Cab<br />
To Suit Ford Ranger PX - Dual Cab<br />
To Suit Ford Ranger Wildtrak - Dual Cab<br />
To Suit Isuzu D-Max 2020+ - Dual Cab<br />
To Suit Isuzu MU-X 8/2021+<br />
To Suit Mitsubishi Pajero Sport 7/2019+<br />
To Suit Mitsubishi Triton MQ and MR - Dual Cab<br />
To Suit Nissan Navara NP300 - Dual Cab<br />
To Suit Nissan Patrol Y62 - Full Length<br />
To Suit Ram 1500 DS - Crew Cab<br />
To Suit Ram 1500 DT - Crew Cab<br />
To Suit Toyota Hilux Mk8 - Dual Cab<br />
To Suit Toyota Landcruiser 200 Series - Sun Roof Model<br />
To Suit Toyota Landcruiser 200 Series - Full Length<br />
To Suit Toyota Prado 150<br />
To Suit Slide-Away Hard Tonneau Cover<br />
IFR9337<br />
IFR9338<br />
IFR9341<br />
IFR9343<br />
IFR9347<br />
IFR9373<br />
IFR9378<br />
IFR0115TS<br />
IFR0115PL<br />
IFR0110WT<br />
IFR0055<br />
IFR0055WT<br />
IFR0064<br />
IFR0095<br />
IFR0079<br />
IFR0067<br />
IFR0048<br />
IFR0062L<br />
IFR0075<br />
IFR0085<br />
IFR0065<br />
IFR0056<br />
IFR0056L<br />
IFR0047<br />
IFRSLDAWAY<br />
A<br />
B<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
37
4WD AND TOURING GEAR<br />
Atlas Legs, Crossbars, Fit Kits and Rack Accessories<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
LEGS<br />
Fixed Point and Track Leg (Mk1) - (4 Pack)<br />
IFR0143<br />
Fixed Point and Track Leg (Mk1) - (6 Pack)<br />
IFR0144<br />
Fixed Point and Track Leg (Mk2) - (4 Pack)<br />
IFR0304<br />
Gutter Mount Leg - 110mm (2 Pack)<br />
IFR0350<br />
Gutter Mount Leg - 150mm (2 Pack)<br />
IFR0351<br />
CROSSBARS<br />
Crossbar 1250mm (1 Bar)<br />
IFR0516<br />
Crossbar 1375mm (1 Bar)<br />
IFR0517<br />
Crossbar 1500mm (1 Bar)<br />
IFR0518<br />
Crossbar 1650mm (1 Bar)<br />
IFR0519<br />
FIT KITS<br />
3 Crossbar Kit to Suit Toyota Prado 150 and Landcruiser 200 Series IFR0311<br />
Track Kit to Suit Toyota Hilux 2005-2015 - Dual Cab<br />
IFR0315<br />
Track Kit to Suit Ford Ranger and Mazda BT50 2011+ - Dual Cab<br />
IFR0316<br />
Track Kit to Suit Toyota Hilux 2015+ - Dual Cab<br />
IFR0321<br />
Track Kit to Suit Nissan Navara NP300 2015+ - Dual Cab<br />
IFR0328<br />
Track Kit to Suit Mitsubishi Triton MQ and MR 2015+ - Dual Cab<br />
IFR0330<br />
Universal Track Kit - 800mm<br />
IFR0360<br />
Universal Track Kit - 1200mm<br />
IFR0362<br />
Crossbar Flush Kit to Suit Isuzu D-Max 2020+ - Dual Cab<br />
IFR1007<br />
Canopy Permanent Mount Kit<br />
IFR1034<br />
ACCESSORIES<br />
Shovel Holder<br />
IFR3204<br />
Eye Bolt Kit - (2 Pack)<br />
IFR5022<br />
Load Holder - (2 Pack)<br />
IFR5025<br />
Awning Brackets Kit<br />
IFR5029<br />
Recovery Tracks Holder Kit<br />
IFR5031<br />
Platform Spare Wheel Restraint<br />
IFR5032<br />
High Lift Jack Holder<br />
IFR5033<br />
SEE VEHICLE LISTING PAGES FOR VEHICLE SPECIFIC COMPLETE KIT OPTIONS<br />
REFER TO VEHICLE MANUFACTURER FOR SPECIFIC ROOF LOAD CARRYING CAPACITY<br />
A B C<br />
D E F<br />
38 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Atlas Roof Rack and Crossbar Accessories<br />
Product Description<br />
Part No.<br />
K<br />
L<br />
M<br />
N<br />
O<br />
P<br />
Q<br />
R<br />
S<br />
T<br />
ACCESSORIES CONTINUED<br />
Platform Gas Bottle Holder<br />
Platform Corner Brackets Kit<br />
Platform Jerry Can Holder<br />
Platform Bottle Opener<br />
Multi-Fit Light Bracket Kit<br />
Ratchet Grabs - (1)<br />
Load Roller - (1)<br />
Cam Buckle Straps - 2m Length (2 Pack, Includes Soft Loops) - Not shown<br />
Ratchet Tie Down Straps - 3.6m Length (4 Pack, Includes Soft Loops) - Not shown<br />
Ratchet Tie Down Straps - 3.6m Length (2 Pack)<br />
IFR5034<br />
IFR5036<br />
IFR5038<br />
IFRBOTT<br />
IFRLIGHBKT<br />
IFRRATC<br />
IFRROLL<br />
IRATCHET0012<br />
IRATCHET0023<br />
IRATCHET0034<br />
G H I<br />
J K L<br />
M N O<br />
P<br />
Q<br />
R S T<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
39
4WD AND TOURING GEAR<br />
Alloy / Steel Roof Racks / Mount Accessories<br />
Product Description<br />
Part No.<br />
ALLOY ROOF RACKS - POWDERCOATED METALLIC GREY, MESH FLOOR<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
Flat Rack - 1.8m x 1.25m - While Stocks Last<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m - While Stocks Last<br />
Cage Style - 2.2m x 1.25m - While Stocks Last<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end) - While Stocks Last<br />
Trade Style - 2.2m x 1.25m (Open end) - While Stocks Last<br />
Crossbar - While Stocks Last<br />
STEEL ROOF RACKS - POWDERCOATED BLACK, MESH FLOOR<br />
Cage Style - 1.4m x 1.25m - While Stocks Last<br />
Cage Style - 1.8m x 1.25m - While Stocks Last<br />
Cage Style - 2.2m x 1.25m - While Stocks Last<br />
Rooftop Tent Compatible - 1.8m x 1.25m - While Stocks Last<br />
Rooftop Tent Compatible - 2.2m x 1.25m - While Stocks Last<br />
Trade Style - 1.8m x 1.25m (Open end) - While Stocks Last<br />
A<br />
B<br />
C<br />
Trade Style - 2.2m x 1.25m (Open end) - While Stocks Last<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
UNIVERSAL ALLOY ROOF RAIL EXTRUSION - SOLD SEPARATELY<br />
Alloy Extrusion - 1085mm (2 Pieces - Inc. mounting hardware)<br />
ROOF RACK MOUNTING KITS - SOLD SEPARATELY<br />
Gutter Mount Feet - 100mm (8 Feet) - While Stocks Last<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
Gutter Mount Feet - 150mm (8 Feet) - While Stocks Last<br />
Gutter Mount Feet - 210mm (8 Feet) - While Stocks Last<br />
Mount Feet to suit Holden Colorado 7/Trailblazer (6 Feet) - While Stocks Last<br />
Mount Feet to suit Toyota Landcruiser 100/105 (8 Feet) - While Stocks Last<br />
Mount Feet to suit Toyota Landcruiser 200 (8 Feet) - While Stocks Last<br />
Mount Feet to suit Isuzu MU-X (6 Feet) - While Stocks Last<br />
Mount Feet to suit Toyota Prado 150 (2 Feet) - While Stocks Last<br />
ABS Canopy Feet to suit 1.4m Rack<br />
Wheel Clamp - While Stocks Last<br />
Stock<br />
LIMITED<br />
D<br />
L IMITE D<br />
LIMITED<br />
Stock<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
L IMITE D<br />
Stock<br />
STOCK<br />
E<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
F<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
IRRTFLAT18-ALLOY<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRCROSSBAR001<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
IRREXT1085<br />
IRRFEET100<br />
IRRFEET125<br />
IRRFEET150<br />
IRRFEET210<br />
IRRFEET001<br />
IRRFEETLC100<br />
IRRFEETLC200<br />
IRRFEETMUX<br />
IRRFEETPRADO150<br />
IRRFEETABS14<br />
IRRWHEEL CLAMP<br />
L IMITE D<br />
STOCK<br />
LIMITED<br />
LIMITED<br />
G<br />
GUTTER MOUNT FEET<br />
Stock<br />
CHANNEL MOUNT FEET<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
TECHNICAL DIMENSIONS AND SPECIFICATIONS SEE PAGE 469<br />
REFER TO VEHICLE MANUFACTURER FOR SPECIFIC ROOF LOAD CARRYING CAPACITY<br />
40 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Fleet and Mining Accessories<br />
Product Description<br />
Part No.<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
FLEET / MINING ACCESSORIES<br />
High Visibility Light Bar (With lights, reverse alarm and beacon)<br />
Fire Extinguisher (1kg)<br />
High Mount Flag - 1.8m (With red LED)<br />
High Mount Flag - 2.4m (With red LED)<br />
Hi Vis Sand Flag (1m, 2m or 3m length)<br />
Reverse Camera - OE Appr. (With rear view mirror replacement) - While Stocks Last<br />
Safety Triangles (set of 3)<br />
Universal Battery Isolator / Jump Start<br />
Wheel Chocks - Rated to 6 tonne (set of 2)<br />
MINING005<br />
IFIRE EXTINGUISHER<br />
MINING001<br />
MINING008<br />
IHVFLAG<br />
IREVERSECAM001<br />
ISAFETYTRI<br />
IBATISO<br />
IWC6T<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
L IMITE D<br />
STOCK<br />
Stock<br />
LIMITED<br />
L IMITE D<br />
LIMITED<br />
Stock<br />
STOCK<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Stock<br />
I<br />
LIMITED<br />
LIMITED<br />
Stock<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
41
4WD AND TOURING GEAR<br />
Apparel<br />
Product Description<br />
Part No.<br />
A<br />
D<br />
IRONMAN 4X4 60TH ANNIVERSARY T-SHIRT<br />
Size Mens - S<br />
Size Mens - M<br />
Size Mens - L<br />
Size Mens - XL<br />
Size Mens - 2XL<br />
Size Mens - 3XL<br />
Size Mens - 5XL<br />
Size Womens - S<br />
Size Womens - M<br />
Size Womens - L<br />
Size Womens - XL<br />
IRONMAN 4X4 FOAM CELL PRO T-SHIRT<br />
Size Mens - S<br />
Size Mens - M<br />
Size Mens - L<br />
Size Mens - XL<br />
Size Mens - 2XL<br />
Size Mens - 3XL<br />
Size Mens - 5XL<br />
IMTS001MS<br />
IMTS001MM<br />
IMTS001ML<br />
IMTS001MXL<br />
IMTS001M2XL<br />
IMTS001M3XL<br />
IMTS001M5XL<br />
IMTS001WS<br />
IMTS001WM<br />
IMTS001WL<br />
IMTS001WXL<br />
IMTS002MS<br />
IMTS002MM<br />
IMTS002ML<br />
IMTS002MXL<br />
IMTS002M2XL<br />
IMTS002M3XL<br />
IMTS002M5XL<br />
A<br />
B<br />
A<br />
B<br />
B<br />
42 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
4WD AND TOURING GEAR<br />
Merchandise<br />
Product Description<br />
Part No.<br />
D<br />
E<br />
F<br />
G<br />
H<br />
I<br />
J<br />
K<br />
N<br />
O<br />
P<br />
MERCHANDISE<br />
Ironman 4x4 Key Rings<br />
Ironman 4x4 Bottle Opener Key Rings<br />
Ironman 4x4 Breezy Cap - Curved Peak Black Cap<br />
Ironman 4x4 Bank Cap - Flat Peak Grey Cap<br />
Ironman 4x4 Numberplate Surrounds - Slimline Fit (Pair)<br />
Thermal Travel Tumbler 940ml / 32oz<br />
Thermal Travel Tumbler 590ml / 20oz<br />
Thermal Travel Tumbler 355ml / 12oz<br />
Ironman 4x4 Stubby Holder<br />
Ironman 4x4 Car Air Freshener (Adventure Fresh) *Non-retail sold as box of 150 only<br />
The Australian 4WD Handbook<br />
KEY001<br />
KEY002<br />
CAP002<br />
CAP003<br />
INUMBPLATESLIM<br />
IDRINKWARE0034<br />
IDRINKWARE0023<br />
IDRINKWARE0012<br />
CAN001<br />
IAIRFRESHBOX<br />
IBOOK001<br />
C<br />
E<br />
F<br />
D<br />
G<br />
H<br />
K<br />
L<br />
I<br />
J<br />
M<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
43
Product Description<br />
Part No.<br />
It’s a RAID
Product Description Part No. Qty<br />
Req<br />
Accessories and<br />
Suspension<br />
CATALOGUE<br />
Effective 1 August 2023<br />
45
SUSPENSION TO SUIT<br />
Dacia Duster 2010+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT DACIA DUSTER<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12747GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg REN001B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12748GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg REN002B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
REN001BKG<br />
Shock Absorbers<br />
Coil Springs<br />
Camber Bolt Kits<br />
46 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
2016+<br />
Fiat Fullback<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FIAT FULLBACK<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC050<br />
Commercial Deluxe<br />
BBCD050<br />
Proguard No Loop<br />
BBT050-NL<br />
Proguard Single Loop Kit<br />
BB050-SL<br />
Proguard Triple Loop Kit<br />
BB050-TL<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL AND CLUB CAB<br />
Side Steps<br />
SS050<br />
Side Rails<br />
SS050 RAIL<br />
Side Steps and Rails<br />
SSR050<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB050<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB050<br />
Rear Protection Towbar Plates<br />
RTBPLATE050<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL050<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP050<br />
BATTERY TRAY<br />
Suits 12” Battery<br />
IBTRAY050<br />
SNORKEL - SUITS 2.4L DIESEL<br />
Triton MQ 2015+<br />
ISNORKEL050<br />
LONG RANGE FUEL TANK<br />
125L* Diesel only - Fits Dual Cab only TANK004<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP050<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Not compatible with bull bars. - While Stocks Last<br />
IUP050K<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW050<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre Primed<br />
CANOPY014-P<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Black Mica (X08)<br />
CANFIBRE050-BM<br />
Impulse Blue (D23)<br />
CANFIBRE050-IB<br />
Titanium Grey (U17)<br />
CANFIBRE050-TG<br />
Sterling Silver (U25)<br />
CANFIBRE050-SS<br />
White Solid (W32)<br />
CANFIBRE050-WS<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY050-P<br />
Black Mica (X08)<br />
ICANOPY050-BM<br />
Graphite Grey (U28)<br />
ICANOPY050-GG<br />
Impulse Blue (D23)<br />
ICANOPY050-IB<br />
Sterling Silver (U25)<br />
ICANOPY050-SS<br />
Titanium Grey (U17)<br />
ICANOPY050-TG<br />
White Solid (W32)<br />
ICANOPY050-WS<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY067-E<br />
Sports Bar Adaptor<br />
ISLIDEAWAY067-SBA<br />
ATLAS ROOF RACK KITS<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
47
SUSPENSION TO SUIT<br />
Fiat Fullback 2016+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FIAT FULLBACK<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg MITS040S 1<br />
Light 25mm 0 - 50kg MITS040A 1<br />
Medium 30mm 0 - 80kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 80kg MITS045B * 1<br />
Heavy 30mm 80 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 80 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
48 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2016+<br />
Fiat Fullback<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12729GRC 2<br />
Nitro Gas - Performance 12729GR 2<br />
Nitro Gas - Professional 12729GRP 2<br />
Foam Cell - Comfort 24729FEC 2<br />
Foam Cell - Performance 24729FE 2<br />
Foam Cell - Professional 24729FEP 2<br />
Foam Cell Pro - Comfort 45729FEC 2<br />
Foam Cell Pro - Performance 45729FE 2<br />
Foam Cell Pro - Professional 45729FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg MITS047A 2<br />
Medium 30mm 0 - 300kg MITS047B 2<br />
Heavy 30mm 300kg - GVM MITS047C 2<br />
• Two piece tailshaft models may experience driveline vibration, use 1201K to reduce vibration.<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
U-Bolt Kit Suits MITS047C 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1200UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1201K 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1205K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1199 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Two piece tailshaft models may experience driveline vibration, use 1201K to reduce vibration<br />
MITS047AKG<br />
MITS047AKF<br />
MITS047BKG<br />
MITS047BKF<br />
MITS047BKP<br />
MITS047CKG<br />
MITS047CKF<br />
MITS047CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Upper Control Arms (Foam Cell Pro Kits Only) Brake Hose Relocation Kit<br />
Leaf Springs U-Bolts Polyurethane Spring Bushes Centre Bearing Spacer Kit<br />
Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
49
SUSPENSION TO SUIT<br />
Ford Bronco 2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD BRONCO - 2020+<br />
STEEL WINCH BULL BARS<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR089<br />
Driving Light / Lightbar Patch Loom<br />
TBA<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS<br />
Side Steps<br />
SS089<br />
REAR PROTECTION<br />
Raid Steel Rear Bumper<br />
RTB089<br />
• Compatible with Ironman 4x4 Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS AND RAID REAR BARS<br />
105W Bright Sabre-X Single Row Slim Lightbar 522mm (20”) Straight ILBSR003B 1<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red* ILED20BFR 2<br />
* Rear bar only<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
50 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2020+<br />
Ford Bronco<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD BRONCO - 2020+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 1 12004GR 2<br />
Foam Cell Pro Strut - Performance 45004FE 2<br />
1<br />
Height adjustable with Ironman 4x4 Strut Trim Packers<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 75mm 0 - 50kg FOR019A 1<br />
Medium 75mm 0 - 50kg FOR019B 1<br />
Heavy 75mm 50 - 110kg FOR019C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST110 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA089FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12005GRC 2<br />
Nitro Gas - Performance 12005GR 2<br />
Foam Cell Pro - Comfort 45005FEC 2<br />
Foam Cell Pro - Performance 45005FE 2<br />
Foam Cell Pro - Professional 45005FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 75mm 0-150 kg FOR020A 1<br />
Medium 75mm 150-300 kg FOR020B 1<br />
Medium - with Accessories 75mm 300-GVM FOR020C 1<br />
PANHARD ROD<br />
Panhard Rod Relocation Kit TBA 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
FOR019AKG<br />
FOR019AKP<br />
FOR019BKG<br />
FOR019BKP<br />
FOR019CKG<br />
FOR019CKP<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
51
ACCESSORIES TO SUIT<br />
Ford F150<br />
Series 14<br />
2021+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD F150 SERIES 14 - 2021+<br />
STEEL WINCH BULL BARS<br />
Premium - 60.3mm Tube<br />
Bull Bar Multi-Function Light Patch Loom<br />
Driving Light / Lightbar Patch Loom<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control - 6.5’ Bed<br />
Electric with Remote Control - 5.8’ Bed<br />
ATLAS ROOF RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBP109<br />
IBBPL109<br />
IPLS109<br />
ISLIDEAWAY073-E<br />
ISLIDEAWAY075-E<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
52 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Series 14<br />
2021+<br />
Product Description Part No. Qty<br />
Req<br />
Ford F150<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD F150 SERIES 14 - 2021+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 1 12887GR 2<br />
Nitro Gas Strut - Long Travel Performance 1 12887LGR 2<br />
Foam Cell Pro Strut - Performance 45887FE 2<br />
Foam Cell Pro Strut - Long Travel Performance<br />
45887LFE<br />
1<br />
Height adjustable with Ironman 4x4 Strut Trim Packers<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 50kg FOR013A 1<br />
Light 75mm 0 - 50kg FOR015A 1<br />
Medium 50mm 0 - 50kg FOR013B 1<br />
Medium 75mm 0 - 50kg FOR015B 1<br />
Heavy 50mm 50 - 110kg FOR013C 1<br />
Heavy 75mm 50 - 110kg FOR015C 1<br />
ALIGNMENT LOBES<br />
Alignment Lobes to suit 77006K 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST109 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA109FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12888GRC 2<br />
Nitro Gas - Performance 12888GR 2<br />
Foam Cell Pro - Comfort 45888FEC 2<br />
Foam Cell Pro - Performance 45888FE 2<br />
Foam Cell Pro - Professional 45888FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 200kg FOR014A 2<br />
Medium 50mm 0 - 300kg FOR014B 2<br />
Medium - with Accessories 50mm 300kg - 600kg FOR014C 2<br />
Heavy 50mm 600kg - GVM FOR014D 2<br />
U-BOLTS<br />
U-Bolt Kit 449UBK 2<br />
U-Bolt Kit - Long 449UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1226UK 1<br />
SPACER KITS<br />
Bump Stop Spacer Kit* 77009K 1<br />
* 77009K Mandatory fitment when using 12888 or 45888<br />
PINS<br />
Rear Leaf Fixed End Bolt* 1227 2<br />
* LHS fixed end bolt interferes with fuel tank. It is recommended to cut OEM bolt and replace with 1227<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
FOR013AGK<br />
Light - Foam Cell Pro<br />
FOR013APK<br />
Medium - Nitro Gas<br />
FOR013BGK<br />
Medium - Foam Cell Pro<br />
FOR013BPK<br />
Heavy - Nitro Gas<br />
FOR013GK<br />
Heavy - Foam Cell Pro<br />
FOR013CPK<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Bump Stop Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes Rear Leaf Fixed End Bolt<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
53
Product Description Part No. Qty<br />
Req<br />
Outback Tested
ACCESSORIES TO SUIT<br />
Series 13<br />
2015 to 2020<br />
Product Description Part No. Qty<br />
Req<br />
Ford F150<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD F150 SERIES 13 - 2015-2020<br />
STEEL SIDE STEPS<br />
Side Steps<br />
TOWING<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control - 6.5’ Bed<br />
Electric with Remote Control - 5.8’ Bed<br />
ATLAS ROOF RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
SS086<br />
ISLIDEAWAY073-E<br />
ISLIDEAWAY075-E<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
55
ACCESSORIES AND SUSPENSION TO SUIT<br />
Ford Ranger Raptor<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD NEXT-GEN RANGER RAPTOR - 2022+<br />
STEEL WINCH BULL BARS<br />
Premium - 60.3mm Tube<br />
BBP111<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL110<br />
Driving Light / Lightbar Patch Loom<br />
IPLS111<br />
Polyurethane Overrider Kit to Suit BBR111 Raid Bar<br />
TBA<br />
Winch Control Extension Plug - 1500mm Length<br />
WWB032<br />
Winch Control Box Mount<br />
WWBCP110<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BAR<br />
120W Bright Sabre Single Row Lightbar 812mm (32”) Straight ILBSR002BW 1<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
TOWING<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB111<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY110-E<br />
Manual Operation<br />
ISLIDEAWAY110-M<br />
ATLAS ROOF RACK KITS<br />
Platform A with Blade Fit Kit - 1530mm Length<br />
IFR054PAK<br />
Crossbar (x 2) and Fit Kit -1250mm Width<br />
IFR054C2K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPSK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
SUSPENSION TO SUIT FORD NEXT-GEN RANGER RAPTOR - 2022+<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 50kg FOR018A 1<br />
Heavy 30mm 80 - 120kg FOR018B 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg FOR008A 1<br />
56 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION TO SUIT<br />
9/2018 to 2022<br />
Ford Ranger Raptor<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD RANGER RAPTOR - 9/2018-2022<br />
TOWING<br />
Rear Protection Towbar - Full Rear Bumper Replacement (60.3mm bar)<br />
RTB069<br />
Towbar Wiring Loom - Plug and Play*<br />
ITBL054<br />
*Must use ITBL054 for towbar installations on vehicles with autonomous braking and an Electronic Brake Controller is being installed.<br />
BATTERY TRAY - DUAL CAB ONLY<br />
Suits 10`”Battery<br />
IBTRAY054<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW037<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Frozen White (WVZ)<br />
CANFIBRE054-FW<br />
Magnetic Grey (WVQ)<br />
CANFIBRE054-M<br />
Blue Lightning (SW3)<br />
CANFIBRE054-BL<br />
Shadow Black (UO)<br />
CANFIBRE054-SB<br />
Arctic White (SWU)<br />
CANFIBRE054-AW<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY054-P<br />
Aluminium Metallic (SWR) (38P)<br />
ICANOPY054-AM<br />
Arctic White (SWU)<br />
ICANOPY054-AW<br />
Blue Lightning (SW3)<br />
ICANOPY054-BL<br />
Frozen White (WVZ)<br />
ICANOPY054-FW<br />
Meteor Grey (42A) (SWT)<br />
ICANOPY054-G<br />
Shadow Black (UO)<br />
ICANOPY054-SB<br />
* Pre-primed canopies, plus colour coding.<br />
TUB STRENGTHENING BRACKET<br />
To suit all Canopies - (Must be fitted)<br />
CANOPY010 BRACKET<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY054-E<br />
Sports Bar Adaptor - Compatible with XLT, Raptor, Raptor X and FX4 sports bars<br />
ISLIDEAWAY054-SBA<br />
ATLAS ROOF RACK KITS<br />
Platform A with Blade Fit Kit - 1530mm Length<br />
IFR054PAK<br />
Crossbar (x 2) and Fit Kit -1250mm Width<br />
IFR054C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
SUSPENSION TO SUIT FORD RANGER RAPTOR - 9/2018-2022<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 50kg FOR007A 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg FOR008A 1<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
57
ACCESSORIES TO SUIT<br />
Ford Ranger<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD NEXT-GEN RANGER - 2022+<br />
STEEL WINCH BULL BARS<br />
Commercial - Includes Integrated Recovery Points<br />
BBC110<br />
Commercial Deluxe - Includes Integrated Recovery Points<br />
BBCD110<br />
Premium - 60.3mm Tube<br />
BBP110<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR110<br />
Light Bracket to Suit BBR110 Raid Bar<br />
ILBCKR01<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL110<br />
Driving Light / Lightbar Patch Loom<br />
IPLS110<br />
Polyurethane Overrider Kit to Suit BBR110 Raid Bar<br />
BBPART046<br />
Winch Control Extension Plug - 1500mm Length<br />
WWB032<br />
Winch Control Box Mount<br />
WWBCP110<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
SS110-D<br />
Side Rails<br />
SS110 RAIL<br />
Side Steps and Rails<br />
SSR110-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB110<br />
(Excludes Wildtrak and Raptor)<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB110<br />
Rear Protection Towbar (Matte Finish) - Full Rear Bumper Replacement<br />
RTB110-M<br />
Rear Protection Bumper - Compatible with OEM Towbar<br />
RPB110<br />
Towbar Wiring Loom - Plug and Play*<br />
ITBL110<br />
*Must use ITBL110 on vehicles with AEB and an Electronic Brake Controller is being fitted.<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BAR<br />
120W Bright Sabre Single Row Lightbar 812mm (32”) Straight ILBSR002BW 1<br />
• See page 30 for 20W Cube Light options<br />
SNORKEL<br />
(Excludes Raptor)<br />
ISNORKEL110<br />
BATTERY TRAY - DUAL CAB ONLY<br />
Suits 10”Battery<br />
IBTRAY054<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP110<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY110-P<br />
Arctic White (SWU)<br />
ICANOPY110-AW<br />
Meteor Grey (42A) (SWT)<br />
ICANOPY110-G<br />
Shadow Black (UO)<br />
ICANOPY110-SB<br />
* Pre-primed canopies, plus colour coding.<br />
• Requires tub reinforcing brackets when fitting Pinnacle 2 Canopy<br />
TUB STRENGTHENING BRACKET<br />
To suit all Canopies - (Must be fitted)<br />
CANOPY010 BRACKET<br />
58 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control - Compatible with all models (Excludes Wildtrak)<br />
ISLIDEAWAY110-E<br />
Manual Operation - Compatible with all models (Excludes Wildtrak)<br />
ISLIDEAWAY110-M<br />
Sports Bar Adaptor - Compatible with all models (Excludes Wildtrak)<br />
ISLIDEAWAY110-SBA<br />
• Not suitable for Wildtrak models<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Excludes Wildtrak) - 1530mm Length<br />
IFR054PAK<br />
Platform A with Blade Fit Kit (Suits Wildtrak Dual Cab Only) - 1530mm Length<br />
IFR110WTPAK<br />
Crossbar (x 2) and Fit Kit (Excludes Wildtrak) -1250mm Width<br />
IFR054C2K<br />
Crossbar (x 2) and Fit Kit (Suits Wildtrak Dual Cab Only) -1375mm Width<br />
IFRK094<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPSK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Non-Blindspot Sensor Models Only)<br />
IFF60110XL<br />
Matte Black Smooth Finish 6” (Suits Models with Blindspot Sensors in Flare)<br />
IFF60110WT<br />
Fender Flare Extension Kit to suit BBC/BBCD Bars<br />
IFFEXT110<br />
Fender Flare Extension Kit to suit Raid Bars<br />
IFFEXT110R<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT110-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC110-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC110-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD110<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
Ford Ranger<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
59
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD NEXT-GEN RANGER - 2022+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12885GR 2<br />
Foam Cell Strut - Performance 24885FE 2<br />
Foam Cell Pro Strut - Performance 45885FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light - No Bar 40mm 0 - 50kg FOR010A 1<br />
Medium - Bar Only 50mm 0 - 80kg FOR010B 1<br />
Heavy - Bar / Winch 50mm 80 - 120kg FOR010C 1<br />
• For V6 models, to achieve stated ride height add HILFR05F or adjust Pro seat height to 198mm<br />
STRUT MOUNTS<br />
Steel Strut Top ISST110 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA110FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12886GRC 2<br />
Nitro Gas - Performance 12886GR 2<br />
Foam Cell - Comfort 24886FEC 2<br />
Foam Cell - Performance 24886FE 2<br />
Foam Cell Pro - Comfort 45886FEC 2<br />
Foam Cell Pro - Performance 45886FE 2<br />
Foam Cell Pro - Professional 45886FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR012A 2<br />
Medium 45mm 0 - 300kg FOR012B 2<br />
Heavy 45mm 300kg - 600kg FOR012C 2<br />
Extra Heavy 45mm 600kg - GVM FOR012D 2<br />
Extra Leaf* FOR012XL3 2<br />
Centre Bolt and Liner Kit to suit Extra Leaf FOR012XLK 1<br />
* Suits Ironman 4x4 springs only<br />
• Possible driveline vibration may occur due to increased ride height, use 1223K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 438UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1193UK 1<br />
SPACER KITS<br />
Centre Bearing Spacer Kit 1223K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
60 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur due to increased ride height, use 1223K to reduce vibration to satisfactory level<br />
FOR010AKG<br />
FOR010AKF<br />
FOR010AKP<br />
FOR010BKG<br />
FOR010BKF<br />
FOR010BKP<br />
FOR010CKG<br />
FOR010CKF<br />
FOR010CKP<br />
FOR010DKG<br />
FOR010DKF<br />
FOR010DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 401<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
61
ACCESSORIES TO SUIT<br />
Ford Ranger<br />
PX Mk III<br />
8/2018 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD PXIII RANGER - 8/2018-2022<br />
STEEL WINCH BULL BARS<br />
Commercial - With parking sensor provisions Without Tech Pack<br />
BBC055<br />
Commercial Deluxe - With parking sensor provisions Without Tech Pack<br />
BBCD055<br />
Commercial Deluxe - With or Without Tech Pack<br />
BBCD066<br />
Proguard No Loop - With or Without Tech Pack<br />
BBT066-NL<br />
Proguard Single Loop Kit<br />
BB066-SL<br />
Proguard Triple Loop Kit<br />
BB066-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL066<br />
Driving Light / Lightbar Patch Loom<br />
IPLS066<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL066<br />
Parking Sensor Extension Loom<br />
IBBPSL066<br />
Parking Sensor Holder Kit<br />
PSH066E<br />
• Winch with Steel Cable and Roller Fairlead is not suitable for use with BBCD066 and BBT066 - Use Winch with Synthetic Rope and Alloy Hawse only<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
SS054<br />
Side Rails<br />
SS054 RAIL<br />
Side Steps and Rails<br />
SSR054<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper (Not Wildtrak)<br />
TB066<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB066<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE001<br />
Towbar Wiring Loom - Plug and Play*<br />
ITBL054<br />
*Must use ITBL054 for towbar installations on vehicles with autonomous braking and an Electronic Brake Controller is being installed.<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP054<br />
SNORKEL<br />
XL - (with side indicator)<br />
ISNORKEL034<br />
XLT - (with indicator on side mirror)<br />
ISNORKEL034XLT<br />
BATTERY TRAY - DUAL CAB ONLY<br />
Suits 10”Battery<br />
IBTRAY054<br />
LONG RANGE FUEL TANK<br />
140L* - Suitable for 3.2L Diesel Dual Cab, Extra Cab and Single Cab TANK007<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - DPF Models (Retains factory transmission plate)<br />
UBP055<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW037<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
62 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
PX Mk III<br />
8/2018 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed CANOPY010-P †<br />
Winning Blue (WVV)<br />
CANOPY010-WB<br />
Magnetic Grey (WVQ) CANOPY010-M †<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
• Colour code and build date must be confirmed for Aluminium Metallic Canopies (CANOPY010-AM)<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
† With central locking)<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Frozen White (WVZ)<br />
CANFIBRE054-FW<br />
Magnetic Grey (WVQ)<br />
CANFIBRE054-M<br />
Blue Lightning (SW3)<br />
CANFIBRE054-BL<br />
Shadow Black (UO)<br />
CANFIBRE054-SB<br />
Arctic White (SWU)<br />
CANFIBRE054-AW<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY054-P<br />
Aluminium Metallic (SWR) (38P)<br />
ICANOPY054-AM<br />
Arctic White (SWU)<br />
ICANOPY054-AW<br />
Blue Lightning (SW3)<br />
ICANOPY054-BL<br />
Frozen White (WVZ)<br />
ICANOPY054-FW<br />
Meteor Grey (42A) (SWT)<br />
ICANOPY054-G<br />
Shadow Black (UO)<br />
ICANOPY054-SB<br />
* Pre-primed canopies, plus colour coding.<br />
TUB STRENGTHENING BRACKET<br />
To suit all Canopies - (Must be fitted)<br />
CANOPY010 BRACKET<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY054-E<br />
Manual Operation - Compatible with all models (Excludes Wildtrak)<br />
ISLIDEAWAY054-M<br />
Sports Bar Adaptor - Compatible with XLT, Raptor, Raptor X and FX4 sports bars<br />
ISLIDEAWAY054-SBA<br />
• Not suitable for Wildtrak models<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Suits PXIII Dual Cab Only) - 1530mm Length<br />
IFR054PAK<br />
Platform A with Blade Fit Kit (Suits Wildtrak Dual Cab Only) - 1530mm Length<br />
IFR054WTPAK<br />
Crossbar (x 2) and Fit Kit (Excludes Wildtrak) -1250mm Width<br />
IFR054C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits XLS / XLT Dual Cab Only)<br />
IFF6054XLT<br />
Matte Black Smooth Finish 6” (Suits Wildtrak Dual Cab Only)<br />
IFF6066WT<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT054-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC066-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC066-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD054<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
63
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
PX Mk III<br />
Not USA Model<br />
7/2018 to 2022<br />
SUSPENSION TO SUIT FORD PXIII RANGER - 7/2018-2022<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12827GR 2<br />
Foam Cell Strut - Performance 24827FE 2<br />
Foam Cell Pro Strut - Performance 45827FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg FOR005S 1<br />
Light 35mm 0 - 50kg FOR005A 1<br />
Medium 40mm 0 - 50kg FOR005B 1<br />
Heavy 45mm 50 - 110kg FOR005C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST055 2<br />
Bump Stop Base Holder PBC055 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Foam Cell HILFR05F 2<br />
10mm Strut Trim Packer Foam Cell HILFR10F 2<br />
15mm Strut Trim Packer Foam Cell HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
SWAY BAR LINK<br />
Adjustable Sway Bar Link 1214K 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA054FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR002A 2<br />
Medium 45mm 0 - 300kg FOR002B 2<br />
Heavy 45mm 300kg - GVM FOR002C 2<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1193UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1194K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
64 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
PX Mk III<br />
Not USA Model<br />
7/2018 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
FOR005AKG<br />
FOR005AKF<br />
FOR005AKP<br />
FOR005BKG<br />
FOR005BKF<br />
FOR005BKP<br />
FOR005CKG<br />
FOR005CKF<br />
FOR005CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 402<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
65
ACCESSORIES TO SUIT<br />
Ford Ranger<br />
PX Mk II<br />
2015 to 7/2018<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD PXII RANGER - 2015-7/2018<br />
STEEL WINCH BULL BARS<br />
Commercial - With parking sensor provisions Without Tech Pack<br />
BBC055<br />
Commercial Deluxe - With parking sensor provisions Without Tech Pack<br />
BBCD055<br />
Commercial Deluxe - With or Without Tech Pack<br />
BBCD054<br />
Proguard No Loop - With or Without Tech Pack<br />
BBT054-NL<br />
Proguard Single Loop Kit<br />
BB054-SL<br />
Proguard Triple Loop Kit<br />
BB054-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL066<br />
Driving Light / Lightbar Patch Loom<br />
IPLS066<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL066<br />
Parking Sensor Holder Kit<br />
PSH066E<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL AND SINGLE CAB MODELS ONLY<br />
Side Steps<br />
SS054<br />
Side Rails<br />
SS054 RAIL<br />
Side Steps and Rails<br />
SSR054<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper (Not Wildtrak)<br />
TB066<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB066<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE001<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL054<br />
Towbar Wiring Loom - Plug and Play 12 Pin Flat<br />
ITBL054-12P<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP054<br />
SNORKEL<br />
XL - (with side indicator)<br />
ISNORKEL034<br />
XLT - (with indicator on side mirror)<br />
ISNORKEL034XLT<br />
BATTERY TRAY- DUAL CAB ONLY<br />
Suits 10”Battery<br />
IBTRAY054<br />
LONG RANGE FUEL TANK<br />
140L* - Suitable for 3.2L Diesel Dual Cab, Extra Cab and Single Cab TANK007<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Non DPF Models<br />
UBP054<br />
Engine Bay and Transmission - DPF Models (Retains factory transmission plate)<br />
UBP055<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
IUP014K<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW037<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
66 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
PX Mk II<br />
2015 to 7/2018<br />
Product Description Part No. Qty<br />
Req<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
CANOPY010-P†<br />
Winning Blue (WVV)<br />
CANOPY010-WB<br />
Magnetic Grey (WVQ)<br />
CANOPY010-M†<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
• Colour code and build date must be confirmed for Aluminium Metallic Canopies (CANOPY010-AM)<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
† With central locking<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Frozen White (WVZ)<br />
CANFIBRE054-FW<br />
Magnetic Grey (WVQ)<br />
CANFIBRE054-M<br />
Blue Lightning (SW3)<br />
CANFIBRE054-BL<br />
Shadow Black (UO)<br />
CANFIBRE054-SB<br />
Arctic White (SWU)<br />
CANFIBRE054-AW<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY054-P<br />
Aluminium Metallic (SWR) (38P)<br />
ICANOPY054-AM<br />
Arctic White (SWU)<br />
ICANOPY054-AW<br />
Blue Lightning (SW3)<br />
ICANOPY054-BL<br />
Frozen White (WVZ)<br />
ICANOPY054-FW<br />
Meteor Grey (42A) (SWT)<br />
ICANOPY054-G<br />
Shadow Black (UO)<br />
ICANOPY054-SB<br />
* Pre-primed canopies, plus colour coding.<br />
TUB STRENGTHENING BRACKET<br />
To suit all Canopies - (Must be fitted)<br />
CANOPY010 BRACKET<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY054-E<br />
Manual Operation - Compatible with all models (Excludes Wildtrak)<br />
ISLIDEAWAY054-M<br />
Sports Bar Adaptor - Compatible with XLT, Raptor, Raptor X and FX4 sports bars<br />
ISLIDEAWAY054-SBA<br />
• Not suitable for Wildtrak models<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Suits PXII Dual Cab Only) - 1530mm Length<br />
IFR054PAK<br />
Platform A with Blade Fit Kit (Suits Wildtrak Dual Cab Only) - 1530mm Length<br />
IFR054WTPAK<br />
Crossbar (x 2) and Fit Kit (Excludes Wildtrak) -1250mm Width<br />
IFR054C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits PXII and Wildtrak Dual Cab)<br />
IFF6054<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC066-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC066-CC-2R-A<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
67
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
PX Mk II<br />
Not USA Model<br />
2015 to 6/2018<br />
SUSPENSION TO SUIT FORD PXII RANGER - 2015-6/2018<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12727GR 2<br />
Foam Cell Strut - Performance 24727FE 2<br />
Foam Cell Pro Strut - Performance 45727FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg FOR001S 1<br />
Light 35mm 0 - 50kg FOR001A 1<br />
Medium 40mm 0 - 50kg FOR001B 1<br />
Heavy 45mm 50 - 110kg FOR001C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST014 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA054FA-2 1<br />
SPACER KIT<br />
Sway Bar Relocation Kit 1203K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR002A 2<br />
Medium 45mm 0 - 300kg FOR002B 2<br />
Heavy 45mm 300kg - GVM FOR002C 2<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1193UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1194K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
68 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
PX Mk II<br />
Not USA Model<br />
2015 to 6/2018<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
FOR001AKG<br />
FOR001AKF<br />
FOR001AKP<br />
FOR001BKG<br />
FOR001BKF<br />
FOR001BKP<br />
FOR001CKG<br />
FOR001CKF<br />
FOR001CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 402<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
69
ACCESSORIES TO SUIT<br />
Ford Ranger<br />
PX<br />
7/2011 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD PX RANGER - 7/2011-2015<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC038<br />
Commercial Deluxe<br />
BBCD038<br />
Proguard No Loop<br />
BBT038-NL<br />
Proguard Single Loop Kit<br />
BB038-SL<br />
Proguard Triple Loop Kit<br />
BB038-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL066<br />
Driving Light / Lightbar Patch Loom<br />
IPLS066<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL066<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL AND SINGLE CAB MODELS ONLY<br />
Side Steps<br />
SS054<br />
Side Rails<br />
SS054 RAIL<br />
Side Steps and Rails<br />
SSR054<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper (Not Wildtrak)<br />
TB066<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB066<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE001<br />
Towbar Wiring Loom - Plug and Play (PX 7/11 to 4/14 only)<br />
ITBL039<br />
Towbar Wiring Loom - Plug and Play (PX 4/14 to 7/15 only)<br />
ITBL038<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP054<br />
SNORKEL<br />
2.2 / 3.2L Diesel (Fits XL with side indicator) ISNORKEL034<br />
2.2 / 3.2L Diesel (Fits XLT with indicator on side mirror) ISNORKEL034XLT<br />
BATTERY TRAYS<br />
Suits 10”Battery<br />
IBTRAY054<br />
LONG RANGE FUEL TANK<br />
140L* - Suitable for 3.2L Diesel Dual Cab, Extra Cab and Single Cab TANK007<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Not compatible with models fitted with DPF<br />
UBP054<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
IUP014K<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW037<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
70 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
PX<br />
7/2011 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed CANOPY010-P †<br />
Winning Blue (WVV)<br />
CANOPY010-WB<br />
Magnetic Grey (WVQ) CANOPY010-M †<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
• Colour code and build date must be confirmed for Aluminium Metallic Canopies (CANOPY010-AM)<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
† With central locking<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Frozen White (WVZ)<br />
CANFIBRE054-FW<br />
Magnetic Grey (WVQ)<br />
CANFIBRE054-M<br />
Blue Lightning (SW3)<br />
CANFIBRE054-BL<br />
Shadow Black (UP)<br />
CANFIBRE054-SB<br />
Arctic White (SWU)<br />
CANFIBRE054-AW<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY054-P<br />
Aluminium Metallic (SWR) (38P)<br />
ICANOPY054-AM<br />
Arctic White (SWU)<br />
ICANOPY054-AW<br />
Blue Lightning (SW3)<br />
ICANOPY054-BL<br />
Frozen White (WVZ)<br />
ICANOPY054-FW<br />
Meteor Grey (42A) (SWT)<br />
ICANOPY054-G<br />
Shadow Black (UO)<br />
ICANOPY054-SB<br />
* Pre-primed canopies, plus colour coding.<br />
TUB STRENGTHENING BRACKET<br />
To suit all Canopies - (Must be fitted)<br />
CANOPY010 BRACKET<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY054-E<br />
Manual Operation - Compatible with all models (Excludes Wildtrak)<br />
ISLIDEAWAY054-M<br />
Sports Bar Adaptor - Compatible with XLT, Raptor, Raptor X and FX4 sports bars<br />
ISLIDEAWAY054-SBA<br />
• Not suitable for Wildtrak models<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Suits PX Dual Cab Only) - 1530mm Length<br />
IFR054PAK<br />
Platform A with Blade Fit Kit (Suits Wildtrak Dual Cab Only) - 1530mm Length<br />
IFR054WTPAK<br />
Crossbar (x 2) and Fit Kit (Excludes Wildtrak) -1250mm Width<br />
IFR054C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits PX and Wildtrak Dual Cab)<br />
IFF6038<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
71
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
T6 PX<br />
Not USA Model<br />
2011 to 2015<br />
SUSPENSION TO SUIT FORD PX RANGER - 2011-2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12727GR 2<br />
Foam Cell Strut - Performance 24727FE 2<br />
Foam Cell Pro Strut - Performance 45727FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg FOR001S 1<br />
Light 35mm 0 - 50kg FOR001A 1<br />
Medium 40mm 0 - 50kg FOR001B 1<br />
Heavy 45mm 50 - 110kg FOR001C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST014 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA054FA-2 1<br />
SPACER KIT<br />
Sway Bar Relocation Kit 1203K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR002A 2<br />
Medium 45mm 0 - 300kg FOR002B 2<br />
Heavy 45mm 300kg - GVM FOR002C 2<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1193UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1194K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
72 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
T6 PX<br />
Not USA Model<br />
2011 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Ford Ranger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
FOR001AKG<br />
FOR001AKF<br />
FOR001AKP<br />
FOR001BKG<br />
FOR001BKF<br />
FOR001BKP<br />
FOR001CKG<br />
FOR001CKF<br />
FOR001CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 403<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
73
ACCESSORIES AND SUSPENSION TO SUIT<br />
Ford Ranger<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
PJ / PK<br />
Not USA Model<br />
3/2006 to 2011<br />
ACCESSORIES TO SUIT FORD PJ/PK RANGER - 2006-2011<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD014<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL AND SINGLE CAB MODELS ONLY<br />
Side Steps<br />
SS008<br />
Side Steps and Rails<br />
SSR002<br />
SNORKEL<br />
3.0L TDi Diesel ISNORKEL021<br />
LONG RANGE FUEL TANK<br />
122L* Fits Dual and Single Cab only TANK006<br />
* Usable volume may differ to the stated tank capacity<br />
SUSPENSION TO SUIT FORD PJ/PK RANGER - 3/2006-2011<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
Foam Cell Pro - Performance 45667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars Duratorq Engine MAZDA014 1<br />
Uprated Torsion Bars 2.5L WLT Engine MAZDA005 1<br />
• MAZDA014 is 1024mm in length, used on most vehicles. Vehicles with 2.5L WLT Engine use MAZDA005 (924mm) Torsion Bar<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 100kg MAZDA041A 2<br />
Medium 40mm 0 - 200kg MAZDA041B 2<br />
Heavy 40mm 200 - 400kg MAZDA041C 2<br />
Extra Heavy 40mm 400kg - GVM MAZDA041D 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 759UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
• Check Torsion Bar length before ordering.<br />
SUSPENSION KIT CONTENTS<br />
MAZDA041AKG<br />
MAZDA041AKF<br />
MAZDA041AKP<br />
MAZDA041BKG<br />
MAZDA041BKF<br />
MAZDA041BKP<br />
MAZDA041CKG<br />
MAZDA041CKF<br />
MAZDA041CKP<br />
MAZDA041DKG<br />
MAZDA041DKF<br />
MAZDA041DKP<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
74 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Not USA Model<br />
1985 to 2006<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD COURIER RANGER - 1985-2006<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
Foam Cell Pro - Performance 45667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MAZDA005 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 100kg MAZDA006A 2<br />
Medium 40mm 0 - 200kg MAZDA006B 2<br />
Heavy 40mm 200 - 400kg MAZDA006C 2<br />
Extra Heavy 40mm 400kg - GVM MAZDA006D 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 756UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-1 2<br />
Greasable Pin 794 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
MAZDA006AKG<br />
MAZDA006AKF<br />
MAZDA006AKP<br />
MAZDA006BKG<br />
MAZDA006BKF<br />
MAZDA006BKP<br />
MAZDA006CKG<br />
MAZDA006CKF<br />
MAZDA006CKP<br />
MAZDA006DKG<br />
MAZDA006DKF<br />
MAZDA006DKP<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
Ford Courier Ranger<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
75
ACCESSORIES TO SUIT<br />
Ford Everest<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD NEXT-GEN EVEREST - 2022+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe - Includes Integrated Recovery Points<br />
BBCD115<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR110<br />
Pre-Primed Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR110-P<br />
Light Bracket to Suit BBR110 Raid Bar<br />
ILBCKR01<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL110<br />
Driving Light / Lightbar Patch Loom<br />
IPLS110<br />
Polyurethane Overrider Kit to Suit BBR110 Raid Bar<br />
BBPART046<br />
Camera Extension Cable<br />
IBBCLE115<br />
Winch Control Extension Plug - 1500mm Length<br />
WWB032<br />
Winch Control Box Mount<br />
WWBCP110<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BAR<br />
120W Bright Sabre Single Row Lightbar 812mm (32”) Straight ILBSR002BW 1<br />
• See page 30 for 20W Cube Light options<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
SS115-D<br />
Side Rails<br />
SS115 RAIL<br />
Side Steps and Rails<br />
SSR115-D<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP110<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 900mm<br />
ITD900<br />
Single Drawer - 900mm<br />
ISD900<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform E with Blade Fit Kit - 2130mm Length (Ambiente, Trend and Sport Models)<br />
IFR115TSPEK<br />
Platform E with Blade Fit Kit - 2130mm Length (Platinum Model)<br />
IFR115PLPEK<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Non-Blindspot Sensor Models Only)<br />
IFF60115<br />
Matte Black Smooth Finish 6” (Suits Models with Blindspot Sensors in Flare)<br />
IFF60115B<br />
Fender Flare Extension Kit to suit BBC/BBCD Bars<br />
IFFEXT110<br />
Fender Flare Extension Kit to suit Raid Bars<br />
IFFEXT110R<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC110-CC-1R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD110<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
76 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Next-Gen<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Ford Everest<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD NEXT-GEN EVEREST - 2022+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12885GR 2<br />
Foam Cell Strut - Performance 24885FE 2<br />
Foam Cell Pro Strut - Performance 45885FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light - No Bar 40mm 0 - 50kg FOR010A 1<br />
Medium - Bar Only 50mm 0 - 80kg FOR010B 1<br />
Heavy - Bar / Winch 50mm 80 - 120kg FOR010C 1<br />
• For V6 models, to achieve stated ride height add HILFR05F or adjust Pro seat height to 198mm<br />
STRUT MOUNTS<br />
Steel Strut Top ISST110 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA110FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12732GRC 2<br />
Nitro Gas - Performance 1 12732GR 2<br />
Foam Cell - Performance 1 24732FE 2<br />
Foam Cell Pro - Comfort 45732FEC 2<br />
Foam Cell Pro - Performance 2 45732FE 2<br />
1 Refit original bump stop and shock absorber dust cover.<br />
2 Refit original bump stop with supplied Ironman 4x4 dust boot.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 45mm 0 - 200kg FOR003A 1<br />
Medium 45mm 0 - 200kg FOR003B 1<br />
Heavy 45mm 200 - 300kg FOR003C 1<br />
Extra Heavy 45mm 400kg - GVM FOR003D 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
FOR003AKG2<br />
FOR003AKP2<br />
FOR003BKG2<br />
FOR003BKP2<br />
FOR003CKG2<br />
FOR003CKF2<br />
FOR003CKP2<br />
FOR003DKG2<br />
FOR003DKF2<br />
FOR003DKP2<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 400<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
77
ACCESSORIES TO SUIT<br />
Ford Everest<br />
UAII<br />
7/2018 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD UAII EVEREST - 7/2018-2022<br />
STEEL WINCH BULL BARS<br />
Commercial - With parking sensor provisions Without Tech Pack<br />
BBC055<br />
Commercial Deluxe - With parking sensor provisions Without Tech Pack<br />
BBCD055<br />
Commercial Deluxe - With or Without Tech Pack<br />
BBCD066<br />
Proguard No Loop - With or Without Tech Pack<br />
BBT066-NL<br />
Proguard Single Loop Kit<br />
BB066-SL<br />
Proguard Triple Loop Kit<br />
BB066-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL066<br />
Driving Light / Lightbar Patch Loom<br />
IPLS066<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL066<br />
Parking Sensor Holder Kit<br />
PSH066E<br />
• Winch with Steel Cable and Roller Fairlead is not suitable for use with BBCD066 and BBT066 - Use Winch with Synthetic Rope and Alloy Hawse only<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS055<br />
Side Rails<br />
SS055 RAIL<br />
Side Steps and Rails<br />
SSR055<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP054<br />
SNORKEL<br />
UAII Everest<br />
ISNORKEL034XLT<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - DPF Models (Retains factory transmission plate)<br />
UBP055<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
78 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
UAII<br />
7/2018 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Ford Everest<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD EVEREST - 7/2018-2022 / 2015-6/2018<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12827GR 2<br />
Foam Cell Strut - Performance 24827FE 2<br />
Foam Cell Pro Strut - Performance 45827FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg FOR005S 1<br />
Medium 40mm 0 - 50kg FOR005A 1<br />
Heavy 45mm 50 - 110kg FOR005B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST055 2<br />
Bump Stop Base Holder PBC055 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
SWAY BAR LINK<br />
Adjustable Sway Bar Link 1214K 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA054FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 1 12732GR 2<br />
Foam Cell - Performance 1 24732FE 2<br />
Foam Cell Pro - Performance 2 45732FE 2<br />
1 Refit original bump stop and shock absorber dust cover.<br />
2 Refit original bump stop with supplied Ironman 4x4 dust boot.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg FOR003B 1<br />
Heavy 45mm 300kg - GVM FOR003C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
FOR003BKG1<br />
FOR003BKF1<br />
FOR003BKP1<br />
FOR003CKG1<br />
FOR003CKF1<br />
FOR003CKP1<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
79
ACCESSORIES TO SUIT<br />
Ford Everest<br />
3.2L<br />
2015 to 6/2018<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT FORD EVEREST - 2015-6/2018<br />
STEEL WINCH BULL BARS<br />
Commercial - With parking sensor provisions Without Tech Pack<br />
Commercial Deluxe - With parking sensor provisions Without Tech Pack<br />
Commercial Deluxe - With or Without Tech Pack<br />
Proguard No Loop - With or Without Tech Pack<br />
Proguard Single Loop Kit<br />
Proguard Triple Loop Kit<br />
Bull Bar Multi-Function Light Patch Loom<br />
Driving Light / Lightbar Patch Loom<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
Parking Sensor Holder Kit<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
Side Rails<br />
Side Steps and Rails<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBC055<br />
BBCD055<br />
BBCD054<br />
BBT054-NL<br />
BB054-SL<br />
BB054-TL<br />
IBBPL066<br />
IPLS066<br />
IPL066<br />
PSH066E<br />
SS055<br />
SS055 RAIL<br />
SSR055<br />
IRP054<br />
UBP054<br />
IUP014K<br />
IDIFFBRE<br />
80 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
3.2L<br />
2015 to 6/2018<br />
Product Description Part No. Qty<br />
Req<br />
Ford Everest<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT FORD EVEREST - 2015-6/2018<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12727GR 2<br />
Foam Cell Strut - Performance 24727FE 2<br />
Foam Cell Pro Strut - Performance 45727FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg FOR001S 1<br />
Medium 40mm 0 - 50kg FOR001A 1<br />
Heavy 40mm 50 - 100kg FOR001B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST014 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA054FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 1 12732GR 2<br />
Foam Cell - Performance 1 24732FE 2<br />
Foam Cell Pro - Performance 2 45732FE 2<br />
1 Refit original bump stop and shock absorber dust cover.<br />
2 Refit original bump stop with supplied Ironman 4x4 dust boot.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg FOR003B 1<br />
Heavy 45mm 300kg - GVM FOR003C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
FOR003BKG<br />
FOR003BKF<br />
FOR003BKP<br />
FOR003CKG<br />
FOR003CKF<br />
FOR003CKP<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
81
ACCESSORIES TO SUIT<br />
GM / Chevrolet Silverado<br />
1500<br />
2019+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / CHEVROLET SILVERADO - 2019+<br />
STEEL WINCH BULL BARS<br />
Raid Full Length Steel Tubular Bumper - Not compatible with ZR2 model<br />
BBR087E<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL087<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
300W Bright Sabre Dual Row Slim Lightbar 815mm (32”) Straight ILBDR002B 1<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80B 2<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BA 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80BF 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BFA 2<br />
STEEL SIDE STEPS AND RAILS<br />
Raid Side Steps<br />
SS087<br />
REAR PROTECTION<br />
Raid Steel Rear Tubular Bumper<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear<br />
RTB087<br />
ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red ILED20BFR 2<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (Long Bed)<br />
ISLIDEAWAY087L-E<br />
Electric with Remote Control (Short Bed)<br />
ISLIDEAWAY087S-E<br />
ATLAS ROOF RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
82 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
SILVERADO<br />
suspension upgrades to suit<br />
currently in development<br />
83
SUSPENSION TO SUIT<br />
GM / Holden Jackaroo<br />
Bighorn / Monterey<br />
1992+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN JACKAROO - 1992+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12643GR 2<br />
Foam Cell - Performance 24643FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD009 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12644GR 2<br />
Foam Cell - Performance 24644FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg HOLD008B 1<br />
Heavy 40mm 300kg - GVM HOLD008C 1<br />
• Use HOLD008C for 3/2001+ Models<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Torsion Bars<br />
HOLD008BKG<br />
HOLD008BKF<br />
HOLD008CKG<br />
HOLD008CKF<br />
84 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
11/1986 to 1991<br />
GM / Holden Jackaroo<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN JACKAROO - 11/1986-1991<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars 43mm Spline Count HOLD005A 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12671GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 40mm 0 - 300kg HOLD004BD/S 1<br />
Medium - Near Side 40mm 0 - 300kg HOLD004BN/S 1<br />
Heavy - Drivers Side 40mm 300kg - GVM HOLD004CD/S 1<br />
Heavy - Near Side 40mm 300kg - GVM HOLD004CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 747UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 791 2<br />
Greasable Pin 792 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD007BKG<br />
HOLD007BKF<br />
HOLD007CKG<br />
HOLD007CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
85
SUSPENSION TO SUIT<br />
GM / Holden Jackaroo Pre 1986<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN JACKAROO - PRE 1986<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MAZDA005 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 40mm 0 - 300kg HOLD004BD/S 1<br />
Medium - Near Side 40mm 0 - 300kg HOLD004BN/S 1<br />
Heavy - Drivers Side 40mm 300kg - GVM HOLD004CD/S 1<br />
Heavy - Near Side 40mm 300kg - GVM HOLD004CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 747UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 791 2<br />
Greasable Pin 792 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD005BKG<br />
HOLD005BKF<br />
HOLD005CKG<br />
HOLD005CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
86 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1995 to 1/1999<br />
GM / Holden Frontera<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN JACKAROO - 1995-1/1999<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD009 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12644GR 2<br />
Foam Cell - Performance 24644FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg HOLD008B 1<br />
Heavy 45mm 300kg - GVM HOLD008C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Torsion Bars<br />
HOLD008BKG1<br />
HOLD008BKF1<br />
HOLD008CKG1<br />
HOLD008CKF1<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
87
ACCESSORIES TO SUIT<br />
GM / Holden Trailblazer<br />
LT / LTZ<br />
2017+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / HOLDEN TRAILBLAZER - 2017+<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
Commercial Deluxe<br />
Proguard No Loop<br />
Proguard Single Loop Kit<br />
Proguard Triple Loop Kit<br />
Driving Light / Lightbar Patch Loom<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
Side Rails<br />
Side Steps and Rails<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points (One piece, two points) - 5000kg rating<br />
Recovery Points - 5000kg Rating (Pair)<br />
SNORKEL<br />
Trailblazer LT/LTZ 2017+<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8 x 1.25m<br />
Rooftop Tent Compatible - 1.8 x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Mount Feet (6 Feet) - Suits OE rails<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBC057<br />
BBCD057<br />
BBT057-NL<br />
BB057-SL<br />
BB057-TL<br />
IPLS057<br />
IPL057<br />
SS044<br />
SS044 RAIL<br />
SSR044<br />
IRP057<br />
IRP058<br />
ISNORKEL036<br />
UBP057<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET001<br />
IDIFFBRE<br />
88 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
LT / LTZ<br />
2017+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN TRAILBLAZER - 2017+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12746GRC 2<br />
Nitro Gas - Performance 12746GR 2<br />
Foam Cell - Comfort 24746FEC 2<br />
Foam Cell - Performance 24746FE 2<br />
Foam Cell Pro - Comfort 45746FEC 2<br />
Foam Cell Pro - Performance 45746FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 250kg HOLD022S 1<br />
Light 30mm 0 - 250kg HOLD022A 1<br />
Medium 40mm 0 - 250kg HOLD022B 1<br />
Heavy 45mm 250kg - GVM HOLD022C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Standard - Nitro Gas<br />
Standard - Foam Cell<br />
Standard - Foam Cell Pro<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
SUSPENSION TO SUIT<br />
GM / Holden Trailblazer<br />
HOLD022SKG<br />
HOLD022SKF<br />
HOLD022SKP<br />
HOLD022AKG<br />
HOLD022AKF<br />
HOLD022AKP<br />
HOLD022BKG<br />
HOLD022BKF<br />
HOLD022BKP<br />
HOLD022CKG<br />
HOLD022CKF<br />
HOLD022CKP<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
89
ACCESSORIES TO SUIT<br />
GM / Holden Colorado 7<br />
RG<br />
2012+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / HOLDEN COLORADO 7 - 2012+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
Side Rails<br />
Side Steps and Rails<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
SNORKEL<br />
Colorado 7 RG 2012+<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8 x 1.25m<br />
Rooftop Tent Compatible - 1.8 x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Mount Feet (6 Feet) - Suits OE rails<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD044<br />
SS044<br />
SS044 RAIL<br />
SSR044<br />
IRP058<br />
ISNORKEL036<br />
UBP041<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET001<br />
IDIFFBRE<br />
90 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Trailblazer<br />
2012+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN COLORADO 7 - 2012+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FAS-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12746GRC 2<br />
Nitro Gas - Performance 12746GR 2<br />
Foam Cell - Comfort 24746FEC 2<br />
Foam Cell - Performance 24746FE 2<br />
Foam Cell Pro - Comfort 45746FEC 2<br />
Foam Cell Pro - Performance 45746FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 250kg HOLD022S 1<br />
Light 30mm 0 - 250kg HOLD022A 1<br />
Medium 40mm 0 - 250kg HOLD022B 1<br />
Heavy 45mm 250kg - GVM HOLD022C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Standard - Nitro Gas<br />
Standard - Foam Cell<br />
Standard - Foam Cell Pro<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
SUSPENSION TO SUIT<br />
GM / Holden Colorado 7<br />
HOLD022SKG<br />
HOLD022SKF<br />
HOLD022SKP<br />
HOLD022AKG<br />
HOLD022AKF<br />
HOLD022AKP<br />
HOLD022BKG<br />
HOLD022BKF<br />
HOLD022BKP<br />
HOLD022CKG<br />
HOLD022CKF<br />
HOLD022CKP<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
91
ACCESSORIES TO SUIT<br />
GM / Holden Colorado<br />
RG<br />
11/2016 to 2020<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / HOLDEN COLORADO - 11/2016-2020<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC057<br />
Commercial Deluxe<br />
BBCD057<br />
Proguard No Loop<br />
BBT057-NL<br />
Proguard Single Loop Kit<br />
BB057-SL<br />
Proguard Triple Loop Kit<br />
BB057-TL<br />
Driving Light / Lightbar Patch Loom<br />
IPLS057<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL057<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL, SPACE AND SINGLE CAB MODELS ONLY<br />
Side Steps<br />
SS057<br />
Side Steps - Dimple Step Design<br />
SS057-D<br />
Side Rails<br />
SS057 RAIL<br />
Side Steps and Rails<br />
SSR057<br />
Side Steps and Rails - Dimple Step Design<br />
SSR057-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB040<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB040<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE002<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL040<br />
Load Resistor Kit with Mounting Brackets for Licence Plate Lights<br />
LR12V10W<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points (One piece, two points) - 5000kg rating<br />
IRP057<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP058<br />
BATTERY TRAY<br />
Suits 8” Battery<br />
IBTRAY057<br />
SNORKEL<br />
Colorado RG 2016+<br />
ISNORKEL036<br />
LONG RANGE FUEL TANK<br />
145L* Diesel only - Fits Dual Cab Automatic Transmission only TANK057<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP057<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW038<br />
*Designed to suit factory tubs, will not suit ute liner without modification<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab Only)<br />
IFF6057<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
92 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
RG<br />
2016 to 2020<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
GM / Holden Colorado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN COLORADO - 2016-2020<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg HOLD020A 1<br />
Heavy 40mm 50 - 110kg HOLD020B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg HOLD021A 2<br />
Medium 45mm 0 - 300kg HOLD021B 2<br />
Heavy 45mm 300kg - 600kg HOLD021C 2<br />
Extra Heavy 45mm 600kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
U-Bolt Kit Suits HOLD021D 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1148 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
93
SUSPENSION TO SUIT<br />
GM / Holden Colorado<br />
RG<br />
2016 to 2020<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
HOLD021AKG1<br />
HOLD021AKF1<br />
HOLD021AKP1<br />
HOLD021BKG1<br />
HOLD021BKF1<br />
HOLD021BKP1<br />
HOLD021CKG1<br />
HOLD021CKF1<br />
HOLD021CKP1<br />
HOLD021DKG1<br />
HOLD021DKF1<br />
HOLD021DKP1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 404<br />
UPGRADE<br />
94 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
RG<br />
2012 to 10/2016<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
GM / Holden Colorado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / HOLDEN COLORADO - 2012-10/2016<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC040<br />
Commercial Deluxe<br />
BBCD040<br />
Driving Light / Lightbar Patch Loom<br />
IPLS057<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL057<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS057<br />
Side Steps - Dimple Step Design<br />
SS057-D<br />
Side Rails<br />
SS057 RAIL<br />
Side Steps and Rails<br />
SSR057<br />
Side Steps and Rails - Dimple Step Design<br />
SSR057-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB040<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB040<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE002<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL040<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP058<br />
SNORKEL<br />
Colorado RG 2012-10/2016<br />
ISNORKEL036<br />
LONG RANGE FUEL TANK<br />
145L* Diesel only - Fits Dual Cab only TANK057<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP041<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW038<br />
*Designed to suit factory tubs, will not suit ute liner without modification<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab Only)<br />
IFF6040<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
95
SUSPENSION TO SUIT<br />
GM / Holden Colorado<br />
RG<br />
2012 to 2016<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN COLORADO - 2012-2016<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FAS-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg HOLD021A 2<br />
Medium 45mm 0 - 300kg HOLD021B 2<br />
Heavy 45mm 300kg - 600kg HOLD021C 2<br />
Extra Heavy 45mm 600kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
U-Bolt Kit Suits HOLD021D 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1148 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
96 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
RG<br />
2012 to 2016<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
GM / Holden Colorado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
HOLD021AKG<br />
HOLD021AKF<br />
HOLD021AKP<br />
HOLD021BKG<br />
HOLD021BKF<br />
HOLD021BKP<br />
HOLD021CKG<br />
HOLD021CKF<br />
HOLD021CKP<br />
HOLD021DKG<br />
HOLD021DKF<br />
HOLD021DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Strut Shock Absorbers<br />
Leaf Springs U-Bolts Brake Hose Relocation Kit<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 404<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
97
SUSPENSION TO SUIT<br />
GM / Holden Colorado<br />
Low Ride 2WD<br />
2012+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN COLORADO - 2012+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12797GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg TOY038B 1<br />
Heavy 35mm 50 - 110kg TOY038C 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg HOLD023B 2<br />
Heavy 45mm 300kg - 600kg HOLD023C 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-2 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
HOLD023BKG<br />
HOLD023CKG<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
98 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
RC<br />
7/2008 to 12/2012<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES AND SUSPENSION TO SUIT<br />
GM / Holden Colorado<br />
ACCESSORIES TO SUIT GM / HOLDEN COLORADO RC - 7/2008-12/2012<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
Side Steps and Rails<br />
SNORKEL<br />
Colorado RC 7/2008 to 12/2012<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD027<br />
SS001<br />
SSR006<br />
ISNORKEL028<br />
IUP009K<br />
ITD1300<br />
ISD1300<br />
IDIFFBRE<br />
SUSPENSION TO SUIT GM / HOLDEN COLORADO RC - 2003-2012<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD010 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg HOLD006B 2<br />
Heavy 40mm 300kg - 600kg HOLD006C 2<br />
Extra Heavy 40mm 600 kg - GVM HOLD006D 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728TUK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-2 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
• Load Plus not suitable for Rodeo / Colorado / D-Max with OEM springs due to interleaf liners<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD006BKG<br />
HOLD006BKF<br />
HOLD006CKG<br />
HOLD006CKF<br />
HOLD006DKG<br />
HOLD006DKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
99
ACCESSORIES AND SUSPENSION TO SUIT<br />
GM / Holden Rodeo<br />
RA7 - 2007 to 7/2008<br />
RA/RA7 - 2003 to 2012<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / HOLDEN RODEO RA7 - 2007-7/2008<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
Side Steps and Rails<br />
SNORKEL<br />
LX and LT (Does not fit DX model)<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD020<br />
SS001<br />
SSR006<br />
ISNORKEL022<br />
IUP009K<br />
ITD1300<br />
ISD1300<br />
IDIFFBRE<br />
SUSPENSION TO SUIT GM / HOLDEN RODEO RA/RA7 - 2003-2012<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD010 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg HOLD006B 2<br />
Heavy 40mm 300kg - 600kg HOLD006C 2<br />
Extra Heavy 40mm 600 kg - GVM HOLD006D 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728TUK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-2 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
• Load Plus not suitable for Rodeo / Colorado / D-Max with OEM springs due to interleaf liners<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD006BKG<br />
HOLD006BKF<br />
HOLD006CKG<br />
HOLD006CKF<br />
HOLD006DKG<br />
HOLD006DKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
100 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
RA<br />
2002 to 2006<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GM / HOLDEN RODEO - 2002-2006<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
Side Steps and Rails<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD003<br />
SS001<br />
SSR006<br />
IUP009K<br />
ITD1300<br />
ISD1300<br />
IDIFFBRE<br />
ACCESSORIES TO SUIT<br />
GM / Holden Rodeo<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
101
SUSPENSION TO SUIT<br />
GM / Holden Rodeo<br />
KB - TFS<br />
1988 to 3/2003<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN RODEO - 1988-3/2003<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12643GR 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD005A 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 40mm 0 - 300kg HOLD004BD/S 1<br />
Medium - Near Side 40mm 0 - 300kg HOLD004BN/S 1<br />
Heavy - Drivers Side 40mm 300kg - GVM HOLD004CD/S 1<br />
Heavy - Near Side 40mm 300kg - GVM HOLD004CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-2 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
HOLD004BKG2<br />
HOLD004CKG2<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
102 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
KB - TF<br />
1983 to 1988<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GM / HOLDEN RODEO - 1983-1988<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars Suits 1983 - 1988 MAZDA005 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 40mm 0 - 300kg HOLD004BD/S 1<br />
Medium - Near Side 40mm 0 - 300kg HOLD004BN/S 1<br />
Heavy - Drivers Side 40mm 300kg - GVM HOLD004CD/S 1<br />
Heavy - Near Side 40mm 300kg - GVM HOLD004CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 791 2<br />
Greasable Pin 792 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD004BKG1<br />
HOLD004BKF1<br />
HOLD004CKG1<br />
HOLD004CKF1<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
GM / Holden Rodeo<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
103
ACCESSORIES TO SUIT<br />
Great Wall Ute<br />
Cannon<br />
9/2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT GREAT WALL UTE - 9/2020+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
Bull Bar Multi-Function Light Patch Loom<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
Side Rails<br />
Side Steps and Rails<br />
TOWING<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
Towbar Wiring Loom - Plug and Play<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
Sports Bar Adaptor<br />
Sports Bar Adaptor - Suits Vanta Spec Model<br />
ATLAS ROOF RACK KITS<br />
Crossbar (x 2) and Fit Kit - 1375mm Width<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD083<br />
IBBPL083<br />
SS083<br />
SS083 RAIL<br />
SSR083<br />
RTB083<br />
ITBL083<br />
ISLIDEAWAY083-E<br />
ISLIDEAWAY083-SBA<br />
ISLIDEAWAY083VNT-SBA<br />
IFRK094<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
104 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Cannon<br />
9/2020+<br />
Product Description Part No. Qty<br />
Req<br />
Great Wall Ute<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT GREAT WALL UTE - 9/2020+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12853GR 2<br />
Foam Cell Strut - Performance 24853FE 2<br />
Foam Cell Pro Strut - Performance 45853FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 10mm 0 - 50kg TOY055A 1<br />
Light 50mm 0 - 50kg TOY055B 1<br />
Medium 50mm 50 - 110kg TOY055C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST083 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FAS-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR002A 2<br />
Medium 50mm 0 - 300kg FOR002B 2<br />
Heavy 50mm 300kg - GVM FOR002C 2<br />
• Possible driveline vibration may occur due to increased ride height, use 1217K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 1107UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1195UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1217K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur due to increased ride height, use 1217K to reduce vibration to satisfactory level<br />
GWM002AKG<br />
GWM002AKF<br />
GWM002AKP<br />
GWM002BKG<br />
GWM002BKF<br />
GWM002BKP<br />
GWM002CKG<br />
GWM002CKF<br />
GWM002CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
105
SUSPENSION TO SUIT<br />
Haval H9<br />
Wagon 2.0L Petrol<br />
8/2017+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT HAVAL H9 - 8/2017+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg TOY055C 1<br />
Heavy 40mm 50 - 110kg TOY065B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12804GR 2<br />
Foam Cell - Performance 24804FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg TOY056A 1<br />
Heavy 40mm 200 - 400kg TOY056B 1<br />
Extra Heavy 40mm 400kg - GVM TOY056C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
TOY056AKG<br />
TOY056AKF<br />
TOY056BKG<br />
TOY056BKF<br />
TOY056CKG<br />
TOY056CKF<br />
106 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2001+<br />
Hyundai Terracan<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT HYUNDAI TERRACAN - 2001+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HYUND004 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12637GRC 2<br />
Nitro Gas - Performance 12637GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg HYUND003B 1<br />
DIFF BREATHER EXTENDED<br />
Breather Hose DHOSE350 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
HYUND003BKG<br />
Shock Absorbers<br />
Coil Springs<br />
Torsion Bar<br />
Extended Breather Hose<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
107
ACCESSORIES TO SUIT<br />
Isuzu D-Max<br />
2023+ (Facelift)<br />
8/2019 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT ISUZU D-MAX - 8/2019+<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC074<br />
Commercial Deluxe<br />
BBCD074<br />
Raid Full Length Steel Bumper* - Includes Integrated Recovery Points<br />
BBR074<br />
Proguard No Loop<br />
BBT074-NL<br />
Proguard Single Loop Kit<br />
BB074-SL<br />
Proguard Triple Loop Kit<br />
BB074-TL<br />
Driving Light / Lightbar Patch Loom<br />
IPLS074<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL074<br />
Load Resistor Kit with Mounting Brackets for Indicator / Parker Replacement<br />
LR12V21W<br />
* Hidden Winch Control Box Mount (WWBCP001) sold separately<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS - DUAL AND SINGLE CAB<br />
Side Steps - Dimple Step Design<br />
SS074-D<br />
Side Rails<br />
SS074 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR074-D<br />
TOWING<br />
Class 4 Towbar - Suits models without factory bumper<br />
TB074<br />
Rear Protection Towbar<br />
RTB074<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL074<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points (Pair)<br />
IRP074<br />
SNORKEL<br />
D-Max 8/2019+<br />
ISNORKEL074<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Electric Steering Model<br />
UBP074S<br />
Engine Bay and Transmission - Non-Electric Steering Model<br />
UBP074<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW074<br />
*Designed to suit factory tubs, will not suit ute liner without modification<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY074-P<br />
Basalt Black (569)<br />
ICANOPY074-B<br />
Galena Grey (563)<br />
ICANOPY074-GG<br />
Obsidian Grey (554)<br />
ICANOPY074-OG<br />
Mercury Silver (568)<br />
ICANOPY074-S<br />
Splash White (527)<br />
ICANOPY074-W<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY074-E<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR074PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab X-Terrain Only) - 1250mm Width<br />
IFR074C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish V-Cross 6” (Suits Dual Cab Only)<br />
IFF6074<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT074-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC074-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC074-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD074<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
108 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2023+ (Facelift)<br />
8/2019 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU D-MAX - 8/2019+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12845GR 2<br />
Foam Cell Strut - Performance 24845FE 2<br />
Foam Cell Pro Strut - Performance 45845FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA074FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12698GRC 2<br />
Nitro Gas - Performance 12698GR 2<br />
Nitro Gas - Professional 12698GRP 2<br />
Foam Cell - Comfort 24698FEC 2<br />
Foam Cell - Performance 24698FE 2<br />
Foam Cell - Professional 24698FEP 2<br />
Foam Cell Pro - Comfort 45698FEC 2<br />
Foam Cell Pro - Performance 45698FE 2<br />
Foam Cell Pro - Professional 45698FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg HOLD021A 2<br />
Medium 45mm 0 - 300kg HOLD021B 2<br />
Heavy 45mm 300kg - 600kg HOLD021C 2<br />
Extra Heavy 45mm 600kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
U-Bolt Kit Suits HOLD021D 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1152K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1156 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
Isuzu D-Max<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
109
SUSPENSION TO SUIT<br />
Isuzu D-Max 8/2019+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
HOLD021AKG3<br />
HOLD021AKF3<br />
HOLD021AKP3<br />
HOLD021BKG3<br />
HOLD021BKF3<br />
HOLD021BKP3<br />
HOLD021CKG3<br />
HOLD021CKF3<br />
HOLD021CKP3<br />
HOLD021DKG3<br />
HOLD021DKF3<br />
HOLD021DKP3<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Brake Hose Relocation Kit<br />
Strut Shock Absorbers Leaf Springs U-Bolts<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 405<br />
UPGRADE<br />
110 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
2/2017 to 7/2019<br />
Isuzu D-Max<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT ISUZU D-MAX - 2/2017-7/2019<br />
STEEL WINCH BULL BARS (WILL NOT FIT NARROW BODY)<br />
Commercial<br />
BBC058<br />
Commercial Deluxe<br />
BBCD058<br />
Proguard No Loop<br />
BBT058-NL<br />
Proguard Single Loop Kit<br />
BB058-SL<br />
Proguard Triple Loop Kit<br />
BB058-TL<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL058<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL, SPACE AND SINGLE CAB MODELS<br />
Side Steps<br />
SS057<br />
Side Steps - Dimple Step Design<br />
SS057-D<br />
Side Rails<br />
SS057 RAIL<br />
Side Steps and Rails<br />
SSR057<br />
Side Steps and Rails - Dimple Step Design<br />
SSR057-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB041<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB041<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE002<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL041<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg rating (Pair)<br />
IRP058<br />
SNORKEL<br />
3.0L Turbo Diesel ISNORKEL041<br />
LONG RANGE FUEL TANK<br />
145L* Diesel only - Fits Dual Cab Automatic Transmission only TANK057<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP041<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW038<br />
*Designed to suit factory tubs, will not suit ute liner without modification<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
CANOPY020-P<br />
Blue (565)<br />
CANOPY020-B<br />
Graphite (563)<br />
CANOPY020-GG<br />
Cosmic Black (523)<br />
CANOPY020-CB<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
* Pre-primed canopies, plus colour coding.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab Only)<br />
IFF6058<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
111
SUSPENSION TO SUIT<br />
Isuzu D-Max 2016 to 7/2019<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU D-MAX - 2016-7/2019<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg HOLD020A 1<br />
Heavy 40mm 50 - 110kg HOLD020B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FAS-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg HOLD021A 2<br />
Medium 45mm 0 - 300kg HOLD021B 2<br />
Heavy 45mm 300kg - 600kg HOLD021C 2<br />
Extra Heavy 45mm 600kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
U-Bolt Kit Suits HOLD021D 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1152K 1<br />
Tailshaft Spacer ITSS021 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1148 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
112 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2016 to 7/2019<br />
Isuzu D-Max<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
HOLD021AKG1<br />
HOLD021AKF1<br />
HOLD021AKP1<br />
HOLD021BKG1<br />
HOLD021BKF1<br />
HOLD021BKP1<br />
HOLD021CKG1<br />
HOLD021CKF1<br />
HOLD021CKP1<br />
HOLD021DKG1<br />
HOLD021DKF1<br />
HOLD021DKP1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Brake Hose Relocation Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 406<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
113
ACCESSORIES TO SUIT<br />
Isuzu D-Max 6/2012 to 1/2017<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT ISUZU D-MAX - 6/2012-1/2017<br />
STEEL WINCH BULL BARS - WILL NOT FIT NARROW BODY<br />
Commercial<br />
BBC041<br />
Commercial Deluxe<br />
BBCD041<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL058<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS057<br />
Side Steps - Dimple Step Design<br />
SS057-D<br />
Side Rails<br />
SS057 RAIL<br />
Side Steps and Rails<br />
SSR057<br />
Side Steps and Rails - Dimple Step Design<br />
SSR057-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB041<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB041<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE002<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL041<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP058<br />
SNORKEL<br />
3.0L Turbo Diesel ISNORKEL041<br />
LONG RANGE FUEL TANK<br />
145L* Diesel only - Fits Dual Cab Automatic Transmission only TANK057<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP041<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW038<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
CANOPY ABS PLASTIC (SIDE LIFT UP WINDOWS) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
CANOPY020-P<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
* Pre-primed canopies, plus colour coding.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab Only)<br />
IFF6041<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
114 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
6/2012 to 1/2017<br />
Isuzu D-Max<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU D-MAX - 6/2012-1/2017<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FAS-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg HOLD021A 2<br />
Medium 45mm 0 - 300kg HOLD021B 2<br />
Heavy 45mm 300kg - 600kg HOLD021C 2<br />
Extra Heavy 45mm 600kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
U-Bolt Kit Suits HOLD021D 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1152K 1<br />
Tailshaft Spacer ITSS021 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1148 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
115
SUSPENSION TO SUIT<br />
Isuzu D-Max 6/2012 to 1/2017<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
HOLD021AKG<br />
HOLD021AKF<br />
HOLD021AKP<br />
HOLD021BKG<br />
HOLD021BKF<br />
HOLD021BKP<br />
HOLD021CKG<br />
HOLD021CKF<br />
HOLD021CKP<br />
HOLD021DKG<br />
HOLD021DKF<br />
HOLD021DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Brake Hose Relocation Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 406<br />
UPGRADE<br />
116 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Low Ride 2WD<br />
2012+<br />
Product Description Part No. Qty<br />
Req<br />
Isuzu D-Max<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU D-MAX - 2012+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12797GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg TOY038B 1<br />
Heavy 35mm 50 - 110kg TOY038C 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg HOLD023B 2<br />
Heavy 45mm 300kg - 600kg HOLD023C 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-2 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
HOLD023BKG<br />
HOLD023CKG<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
117
ACCESSORIES TO SUIT<br />
Isuzu D-Max 2007 to 6/2012<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT ISUZU D-MAX - 2007-6/2012<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
Side Steps and Rails<br />
SNORKEL<br />
D-MAX 2009+ (Does not fit 4x2 SX model)<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD020<br />
SS001<br />
SSR006<br />
ISNORKEL022<br />
IUP009K<br />
ITD1300<br />
ISD1300<br />
IDIFFBRE<br />
118 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2003 to 2012<br />
Isuzu D-Max<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU D-MAX - 2003-2012<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD010 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg HOLD006B 2<br />
Heavy 40mm 300kg - 600kg HOLD006C 2<br />
Extra Heavy 40mm 600 kg - GVM HOLD006D 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728TUK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-2 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
• Load Plus not suitable for Rodeo / Colorado / D-Max with OEM springs due to interleaf liners<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD006BKG<br />
HOLD006BKF<br />
HOLD006CKG<br />
HOLD006CKF<br />
HOLD006DKG<br />
HOLD006DKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
119
ACCESSORIES TO SUIT<br />
Isuzu MU-X 8/2021+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT ISUZU MU-X - 8/2021+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD095<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR095<br />
Proguard No Loop<br />
BBT095-NL<br />
Proguard Single Loop Kit<br />
BB095-SL<br />
Proguard Triple Loop Kit<br />
BB095-TL<br />
Driving Light / Lightbar Patch Loom<br />
IPLS095<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps - Dimple Step Design<br />
SS095-D<br />
Side Rails<br />
SS095 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR095-D<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP074<br />
SNORKEL<br />
8/2021+ ISNORKEL074<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP074S<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
IFR095PEK<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC074-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC095-CC-2R-A<br />
120 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
8/2021+<br />
Isuzu MU-X<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU MU-X - 8/2021+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12845GR 2<br />
Foam Cell Strut - Performance 24845FE 2<br />
Foam Cell Pro Strut - Performance 45845FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA074FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12746GRC 2<br />
Nitro Gas - Performance 12746GR 2<br />
Foam Cell - Comfort 24746FEC 2<br />
Foam Cell - Performance 24746FE 2<br />
Foam Cell Pro - Comfort 45746FEC 2<br />
Foam Cell Pro - Performance 45746FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 250kg HOLD008A 1<br />
Heavy 40mm 250kg - GVM HOLD008B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD020BKG1<br />
HOLD020BKF1<br />
HOLD020BKP1<br />
HOLD020CKG1<br />
HOLD020CKF1<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
121
ACCESSORIES TO SUIT<br />
Isuzu MU-X<br />
2014 to 2/2017<br />
(Facelift) 3/2017 to 7/2021<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT ISUZU MU-X - 2014-7/2021<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe - (2014 to 2/2017 Only)<br />
BBCD049<br />
Commercial Deluxe - (Suits Facelift 3/2017 to 7/2021 Only)<br />
BBCD061<br />
Proguard No Loop - (Suits Facelift 3/2017 to 7/2021 Only)<br />
BBT061-NL<br />
Proguard Single Loop Kit - (Suits Facelift 3/2017 to 7/2021 Only)<br />
BB061-SL<br />
Proguard Triple Loop Kit - (Suits Facelift 3/2017 to 7/2021 Only)<br />
BB061-TL<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL058<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS044<br />
Side Rails<br />
SS044 RAIL<br />
Side Steps and Rails<br />
SSR044<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP058<br />
SNORKEL<br />
3.0L Turbo Diesel - (2014 to 2/2017 Only) ISNORKEL041<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP041<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Facelift 3/2017 to 7/2021 Only)<br />
IFF6049<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
122 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2014 to 2/2017<br />
(Facelift) 3/2017 to 7/2021<br />
Product Description Part No. Qty<br />
Req<br />
Isuzu MU-X<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU MU-X - 2014-7/2021<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FAS-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12746GRC 2<br />
Nitro Gas - Performance 12746GR 2<br />
Foam Cell - Comfort 24746FEC 2<br />
Foam Cell - Performance 24746FE 2<br />
Foam Cell Pro - Comfort 45746FEC 2<br />
Foam Cell Pro - Performance 45746FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 250kg HOLD008A 1<br />
Heavy 40mm 250kg - GVM HOLD008B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
HOLD020BKG<br />
HOLD020BKF<br />
HOLD020BKP<br />
HOLD020CKG<br />
HOLD020CKF<br />
HOLD020CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
123
SUSPENSION TO SUIT<br />
Isuzu Trooper 1992+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU TROOPER - 1992+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12643GR 2<br />
Foam Cell - Performance 24643FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars HOLD009 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12644GR 2<br />
Foam Cell - Performance 24644FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg HOLD008B 1<br />
Heavy 40mm 300kg - GVM HOLD008C 1<br />
• Use HOLD008C for 3/2001+ Models<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Leaf Springs Torsion Bars<br />
HOLD008BKG<br />
HOLD008BKF<br />
HOLD008CKG<br />
HOLD008CKF<br />
124 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
11/1986 to 1991<br />
Isuzu Trooper<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU TROOPER - 11/1986-1991<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars 43mm Spline Count HOLD005A 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12671GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 40mm 0 - 300kg HOLD004BD/S 1<br />
Medium - Near Side 40mm 0 - 300kg HOLD004BN/S 1<br />
Heavy - Drivers Side 40mm 300kg - GVM HOLD004CD/S 1<br />
Heavy - Near Side 40mm 300kg - GVM HOLD004CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 747UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 791 2<br />
Greasable Pin 792 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD007BKG<br />
HOLD007BKF<br />
HOLD007CKG<br />
HOLD007CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
125
SUSPENSION TO SUIT<br />
Isuzu Trooper Pre 1986<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT ISUZU TROOPER - PRE 1986<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MAZDA005 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 40mm 0 - 300kg HOLD004BD/S 1<br />
Medium - Near Side 40mm 0 - 300kg HOLD004BN/S 1<br />
Heavy - Drivers Side 40mm 300kg - GVM HOLD004CD/S 1<br />
Heavy - Near Side 40mm 300kg - GVM HOLD004CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 747UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 791 2<br />
Greasable Pin 792 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
HOLD005BKG<br />
HOLD005BKF<br />
HOLD005CKG<br />
HOLD005CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
126 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Liberty KK<br />
2007 to 2012<br />
Product Description Part No. Qty<br />
Req<br />
Jeep Cherokee<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP CHEROKEE - 2007-2012<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12711GR 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
10mm Strut Trim Packer Nitro Gas HILFR10 2<br />
15mm Strut Trim Packer Nitro Gas HILFR15 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12712GR 2<br />
• Vehicles with monocoque body construction can be subject to increased NVH (Noise) with upgraded suspension installed<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
127
SUSPENSION TO SUIT<br />
Jeep Cherokee<br />
Liberty KJ<br />
2001 to 2006<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP CHEROKEE - 2001-2006<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12711GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg JEEP014B 1<br />
Heavy or Diesel 40mm 50 - 100kg JEEP014C 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
10mm Strut Trim Packer Nitro Gas HILFR10 2<br />
15mm Strut Trim Packer Nitro Gas HILFR15 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12712GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg JEEP015B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Nitro Gas (Diesel)<br />
• Vehicles with monocoque body construction can be subject to increased NVH (Noise) with upgraded suspension installed<br />
JEEP014BKG<br />
JEEP014BKG1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
128 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
XJ<br />
1984+<br />
Product Description Part No. Qty<br />
Req<br />
Jeep Cherokee<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP CHEROKEE - 1984+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12665GR 2<br />
Foam Cell - Performance 24665FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 100kg JEEP016B 1<br />
STEERING DAMPER<br />
Foam Cell 3540 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12666GR 2<br />
Foam Cell - Performance 24666FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 45mm 0 - 250kg JEEP004BD/S 1<br />
Medium - Near Side 45mm 0 - 250kg JEEP004BN/S 1<br />
• In some cases a driveline vibration may occur after lift, a gearbox crossmember spacer may be required<br />
U-BOLTS<br />
U-Bolt Kit 512UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 762UK 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
• In some cases a driveline vibration may occur after lift, a gearbox crossmember spacer may be required<br />
JEEP003BKG<br />
JEEP003BKF<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
129
ACCESSORIES TO SUIT<br />
Jeep Gladiator<br />
JT<br />
4/2019+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT JEEP GLADIATOR - 4/2019+<br />
STEEL WINCH BULL BARS<br />
Raid Full Length Steel Bumper<br />
BBR077<br />
Raid Stubby Bumper*<br />
BBR077ST<br />
Driving Light / Lightbar Patch Loom<br />
IPLS077<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL077<br />
* Stubby Bull Bar is non-compliant to Australian regulations therefore not available in Australia<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
75W Bright Sabre Single Row Lightbar 524mm (20”) Straight ILBSR003BW 1<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80B 2<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BA 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80BF 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BFA 2<br />
STEEL SIDE STEPS<br />
Raid Rock Sliders<br />
SS077JT<br />
REAR PROTECTION<br />
Raid Steel Rear Bumper*<br />
RTB077JT<br />
Rear OEM Light Pod Holder<br />
RJTHOLDER<br />
* Not compatible with Rubicon rear corner steps<br />
• Compatible with Ironman 4x4 Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red ILED20BFR 2<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control - Requires ‘Trail Rail’ system to be fitted for installation<br />
ISLIDEAWAY077-E<br />
ATLAS ROOF RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1650mm Width<br />
IFR077C2K<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
130 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
JT<br />
4/2019+<br />
Product Description Part No. Qty<br />
Req<br />
Jeep Gladiator<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP GLADIATOR - 4/2019+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12851GRC 2<br />
Nitro Gas - Performance 12851GR 2<br />
Foam Cell Pro - Comfort 45851FEC 2<br />
Foam Cell Pro - Performance 45851FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 60kg JEEP031B 1<br />
STEERING DAMPER<br />
Foam Cell Left Hand Drive 3544 1<br />
Foam Cell Right Hand Drive 3543 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro - Comfort 45854FEC 2<br />
Foam Cell Pro - Performance 45854FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 300kg JEEP032B 1<br />
Heavy 50mm 300kg - 600kg JEEP032C 1<br />
Extra Heavy 50mm 600kg - GVM JEEP032D 1<br />
SUSPENSION KIT<br />
Medium - Foam Cell Pro JEEP032BKP 1<br />
Heavy - Foam Cell Pro JEEP032CKP 1<br />
Extra Heavy - Foam Cell Pro JEEP032DKP 1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
131
ACCESSORIES TO SUIT<br />
Jeep Grand Cherokee<br />
WK2<br />
8/2013+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT JEEP GRAND CHEROKEE - 8/2013+<br />
STEEL WINCH BULL BARS - ONLY FITS DIESEL LAREDO WITHOUT QUADRA-LIFT SUSPENSION (NO SENSOR HOLES PRE-DRILLED)<br />
Commercial Deluxe<br />
BBCD052<br />
• Does not suit vehicles with forward facing radar<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
132 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP GRAND CHEROKEE - 2011+<br />
FRONT SUSPENSION<br />
(4x4) WK2<br />
2011+<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 2011-2016 (Without Sway Bar Bracket) 12735GR 2<br />
Nitro Gas - Performance 2016 + (With Sway Bar Bracket) 12738GRLH/RH 2<br />
• 2016+ vehicles have sway bar bracket attached to lower clevis.<br />
STRUT MOUNTS<br />
Steel Strut Top ISST052 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg JEEP025B 1<br />
Heavy or Diesel 40mm 50 - 100kg JEEP025C 1<br />
REAR SUSPENSION<br />
SPACER KIT<br />
Shock Absorber Spacer 1202K 1<br />
• No rear shock absorbers available due to Nivomat Shock Absorbers and the affect on vehicle tow rating.<br />
1202K is used to space shock absorber mount to accommodate lift.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg JEEP026B 1<br />
Heavy 40mm 300 - 600kg JEEP026C 1<br />
• Nivomat self-levelling rear shock absorber equipped models only. Nivomat shock absorber has a 63mm body size.<br />
Not compatible with 51mm standard shock absorber body.<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
• Vehicles with monocoque body construction can be subject to increased NVH (Noise) with upgraded suspension installed.<br />
JEEP025BKG<br />
JEEP025CKG<br />
SUSPENSION TO SUIT<br />
Jeep Grand Cherokee<br />
SUSPENSION KIT CONTENTS<br />
Strut Shock Absorbers Shock Absorber Spacers Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
133
SUSPENSION TO SUIT<br />
Jeep Grand Cherokee<br />
WJ / WG<br />
1999 to 6/2005<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP GRAND CHEROKEE - 1999-6/2005<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12774GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg JEEP012B 1<br />
Heavy 40mm 50 - 100kg JEEP012C 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12775GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg JEEP013B 1<br />
Heavy 40mm 200kg - GVM JEEP013C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
• Vehicles with monocoque body construction can be subject to increased NVH (Noise) with upgraded suspension installed<br />
JEEP012BKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
134 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ZJ/ZG<br />
1993 to 1998<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP GRAND CHEROKEE - 1993-1998<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12665GR 2<br />
Foam Cell - Performance 24665FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg JEEP003B 1<br />
Heavy 40mm 50 - 100kg JEEP016B 1<br />
STEERING DAMPER<br />
Foam Cell 3540 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12670GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg JEEP006B 1<br />
Heavy 40mm 300kg - GVM JEEP003B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
• Vehicles with monocoque body construction can be subject to increased NVH (Noise) with upgraded suspension installed<br />
JEEP006BKG<br />
JEEP006CKG<br />
SUSPENSION TO SUIT<br />
Jeep Grand Cherokee<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
135
ACCESSORIES TO SUIT<br />
Jeep Wrangler<br />
JL<br />
2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT JEEP WRANGLER - 2018+<br />
STEEL WINCH BULL BARS<br />
Raid Full Length Steel Bumper<br />
BBR077<br />
Raid Stubby Bumper*<br />
BBR077ST<br />
Driving Light / Lightbar Patch Loom<br />
IPLS077<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL077<br />
* Stubby Bull Bar is non-compliant to Australian regulations therefore not available in Australia<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
75W Bright Sabre Single Row Lightbar 524mm (20”) Straight ILBSR003BW 1<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80B 2<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BA 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80BF 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BFA 2<br />
STEEL SIDE STEPS<br />
Raid Rock Sliders<br />
SS077JL<br />
• 4 Door models only<br />
REAR PROTECTION AND TOWING<br />
Raid Steel Rear Bumper*<br />
RTB077JL<br />
Class 3 Tow Bar (3500lb)<br />
TB077JL<br />
Spare Tyre and Licence Plate Relocation Kit †<br />
RWC077JL<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL077JL<br />
† Compatible up to 37” tyres<br />
* Recommend installation of RWC077JL to raise spare wheel and licence plate relocation<br />
• Compatible with Ironman 4x4 Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red ILED20BFR 2<br />
136 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
JL<br />
Includes 4xe Models<br />
2018+<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Jeep Wrangler<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP WRANGLER - 2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12851GRC 2<br />
Nitro Gas - Comfort Suits 4” Lift 12851LGRC 2<br />
Nitro Gas - Performance 12851GR 2<br />
Nitro Gas - Performance Suits 4” Lift 12851LGR 2<br />
Foam Cell Pro - Comfort 45851FEC 2<br />
Foam Cell Pro - Comfort Suits 4” Lift 45851LFEC 2<br />
Foam Cell Pro - Performance 45851FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45851LFE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 45mm 0 - 50kg JEEP029A 1<br />
Medium 50mm 0 - 50kg JEEP029B 1<br />
Medium 100mm 0 - 50kg JEEP035B 1<br />
Heavy 50mm 50 - 100kg JEEP029C 1<br />
•Estimated lift 1” (25mm) less in US Rubicon models<br />
STEERING DAMPER<br />
Foam Cell - Pre 2022 Left Hand Drive 3544 1<br />
Foam Cell - Pre 2022 Right Hand Drive 3543 1<br />
BUMP STOP<br />
Front Bump Stop Spacer Kit Suits 4” Lift 1235K 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 4” Lift SBEXT035 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12852GRC 2<br />
Nitro Gas - Comfort Suits 4” Lift 12852LGRC 2<br />
Nitro Gas - Performance 12852GR 2<br />
Nitro Gas - Performance Suits 4” Lift 12852LGR 2<br />
Foam Cell Pro - Comfort 45852FEC 2<br />
Foam Cell Pro - Comfort Suits 4” Lift 45852LFEC 2<br />
Foam Cell Pro - Performance 45852FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45852LFE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light - (2 Door Models) 45mm 0 - 100kg JEEP030A 1<br />
Medium 50mm 0 - 250kg JEEP030B 1<br />
Medium 100mm 0 - 50kg JEEP036B 1<br />
Heavy 50mm 200kg - GVM JEEP030C 1<br />
BUMP STOP<br />
Rear Bump Stop Spacer Kit Suits 4” Lift 1236K 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 4” Lift SBEXT036 1<br />
BRACKET KITS<br />
Rear Panhard Bracket Kit Suits 4” Lift PDB036R 1<br />
4” Lift Bracket Set* Suits 4” Lift JLKIT035 1<br />
* Bracket set contains 1 x 1235K, 1 x 1236K, 1 x SBEXT035, 1 x SBEXT036 and 1 x PDB036R<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas JEEP030AKG 1<br />
Light - Foam Cell Pro JEEP030AKP 1<br />
Medium - Nitro Gas JEEP030BKG 1<br />
Medium - Nitro Gas Suits 4” Lift JEEP035BKGL 1<br />
Medium - Foam Cell Pro JEEP030BKP 1<br />
Medium - Foam Cell Pro Suits 4” Lift JEEP035BKPL 1<br />
Heavy - Nitro Gas JEEP030CKG 1<br />
Heavy - Foam Cell Pro JEEP030CKP 1<br />
SUSPENSION KIT CONTENTS<br />
4” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers 4” Bracket Set<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
137
ACCESSORIES TO SUIT<br />
Jeep Wrangler<br />
JK<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT JEEP WRANGLER - 2007+<br />
STEEL WINCH BULL BARS - MUST USE OE FOG LIGHTS<br />
Commercial Deluxe<br />
SNORKEL<br />
Not Available in Australia<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD035<br />
ISNORKEL032<br />
IDIFFBRE<br />
138 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
JK<br />
2006+<br />
Product Description Part No. Qty<br />
Req<br />
Jeep Wrangler<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP WRANGLER - 2006+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12751GR 2<br />
Nitro Gas - Performance Suits 4” Lift 12751LGR 2<br />
Foam Cell Pro - Performance 45751FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45751LFE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg JEEP017B 1<br />
Medium - 4” Lift 100mm 0 - 50kg JEEP019B 1<br />
Heavy 40mm 50 - 110kg JEEP017C 1<br />
STEERING DAMPER<br />
Foam Cell Regular Fitment 3541 1<br />
Foam Cell Suits JKBKITL 4” Kit Only 3540 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD010 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12752GR 2<br />
Nitro Gas - Performance Suits 4” Lift 12752LGR 2<br />
Foam Cell Pro - Performance 45752FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45752LFE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - 2 Door 40mm 0 - 250kg JEEP018A 1<br />
Medium - 4 Door 40mm 0 - 250kg JEEP018B 1<br />
Medium - 4” Lift 100mm 0 - 250kg JEEP020B 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD011 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT008 2<br />
• OEM Rear Links can be moved to the front of vehicle.<br />
BRACKET KIT<br />
4” Lift Bracket Set Left Hand Drive Models ONLY JKBKITL 1<br />
• Bracket set is sold complete. Parts are not available individually<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas 2 Door JEEP017AKG<br />
Light - Foam Cell Pro 2 Door JEEP017AKP<br />
Medium - Nitro Gas 4 Door JEEP017BKG<br />
Medium - Nitro Gas 4” Lift JEEP019BKGL<br />
Medium - Foam Cell Pro 4 Door JEEP017BKP<br />
Medium - Foam Cell Pro 4” Lift JEEP019BKPL<br />
• 4” Lift may not be legal for road use in your area. Certification may be required for on-road use<br />
• 4” Lift Kit suits left hand drive models ONLY<br />
• 4” Lift components should only be used together with appropriate geometry correction components<br />
SUSPENSION KIT CONTENTS<br />
4” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers Steering Damper<br />
Coil Springs<br />
4” Bracket Set<br />
4” BRACKET SET CONTENTS<br />
Steering Rod Flip Kit - JKBK01L<br />
Front Shock Absorber Relocation Kit - JKBK02<br />
Radius Arm Relocation Kit - JKBK03<br />
Brake Hose Extension Kit - JKBK04<br />
Front Adjustable Panhard Rod - PANHARD010<br />
• Fitment to RHD is possible with omission of JKBK01L and JKBK05L<br />
Rear Adjustable Panhard Rod - PANHARD012<br />
Rear Panhard Rod Relocation Kit - JKBK05L<br />
Bump Stop Spacer Kit - JKBK06<br />
Adjustable Swaybar Extensions - SBEXT008<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
139
SUSPENSION TO SUIT<br />
Jeep Wrangler<br />
TJ<br />
1996 to 2/2007<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JEEP WRANGLER - 1996-2/2007<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12665GR 2<br />
Foam Cell - Performance 24665FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 40kg JEEP007B 1<br />
Heavy 40mm 40 - 80kg JEEP003B 1<br />
STEERING DAMPER<br />
Foam Cell 3540 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12669GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg JEEP008B 1<br />
• In some cases a driveline vibration may occur after lift, a gearbox crossmember spacer may be required<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
• In some cases a driveline vibration may occur after lift, a gearbox crossmember spacer may be required<br />
JEEP007BKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
140 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2014+<br />
JMC Vigus<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT JMC VIGUS - 2014+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 50kg TOY038C 1<br />
Heavy 45mm 50 - 110kg TOY055A 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell - Professional 24650FEP 2<br />
Foam Cell Pro - Comfort 45650FEC 2<br />
Foam Cell Pro - Performance 45650FE 2<br />
Foam Cell Pro - Professional 45650FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 -200kg JMC002B 2<br />
Heavy 40mm 200 - 400kg JMC002C 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 767UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-3 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
JMC002BKG<br />
JMC002BKF<br />
JMC002BKP<br />
JMC002CKG<br />
JMC002CKF<br />
JMC002CKP<br />
Shock Absorbers Coil Springs U-Bolts<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
141
SUSPENSION TO SUIT<br />
Kia Sorento<br />
BL<br />
2003 to 2008<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT KIA SORENTO - 2003-2008<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg KIA006B 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 200kg KIA007B 1<br />
142 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1978+<br />
Lada Niva<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LADA NIVA - 1978+<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg LADA001B 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 200kg LADA002B 1<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
143
Product Description Part No. Qty<br />
Req<br />
ULTIMATE OVERLAND PRODUCTS<br />
IC A R U s<br />
Roof conversion<br />
to Suit Defender 110<br />
for a full range of alu-cab visit our website<br />
www.alu-cab.com.au<br />
distributed by<br />
Family Owned Australian Company<br />
Since 1958
ACCESSORIES TO SUIT<br />
2007 to 2016<br />
Land Rover Defender<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT LAND ROVER DEFENDER - 2007-2016<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 210mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ITD1000<br />
ISD1000<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET210<br />
IDIFFBRE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
145
SUSPENSION TO SUIT<br />
Land Rover Defender<br />
110, 130 Series<br />
County / Dual Cab<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER DEFENDER 110, 130 SERIES<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12080GR 2<br />
Foam Cell - Performance 24080FE 2<br />
Foam Cell Pro - Performance 45080FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - V8 Petrol Engine 45mm 0 - 80kg LAND007B 1<br />
Medium - 2.5 Puma Engine 45mm 0 - 80kg LAND009B 1<br />
Medium - 2.2 Puma Engine 45mm 0 - 80kg LAND014B 1<br />
STEERING DAMPER<br />
Foam Cell 3532 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Suits 1987+ 1145SK 1<br />
• May cause driveline vibration on 1998+ models<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12640GR 2<br />
Foam Cell - Performance 24640FE 2<br />
Foam Cell Pro - Performance 45640FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - (Self Levelling) 45mm 0 - 300kg LAND008B 1<br />
Medium 45mm 0 - 300kg LAND006B 1<br />
Heavy 45mm 300kg - GVM LAND006C 1<br />
• Re-Fit inner spring if equipped<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas - (Self Levelling)<br />
Medium - Foam Cell - (Self Levelling)<br />
Medium - Foam Cell Pro - (Self Levelling)<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
LAND005BKG<br />
LAND005BKF<br />
LAND005BKP<br />
LAND006BKG<br />
LAND006BKF<br />
LAND006BKP<br />
LAND006CKG<br />
LAND006CKF<br />
LAND006CKP<br />
Shock Absorbers<br />
Coil Springs<br />
146 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
110 Series Trayback<br />
Land Rover Defender<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER DEFENDER 110 SERIES<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12080GR 2<br />
Foam Cell - Performance 24080FE 2<br />
Foam Cell Pro - Performance 45080FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - V8 Petrol Engine 45mm 0 - 80kg LAND007B 1<br />
Medium - 2.5 Puma Engine 45mm 0 - 80kg LAND009B 1<br />
Medium - 2.2 Puma Engine 45mm 0 - 80kg LAND014B 1<br />
STEERING DAMPER<br />
Foam Cell 3532 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Suits 1987+ 1145SK 1<br />
• May cause driveline vibration on 1998+ models<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12640GR 2<br />
Foam Cell - Performance 24640FE 2<br />
Foam Cell Pro - Performance 45640FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg LAND006B 1<br />
Heavy 45mm 300kg - GVM LAND006C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
LAND007BKG<br />
LAND007BKF<br />
LAND007BKP<br />
LAND007CKG<br />
LAND007CKF<br />
LAND007CKP<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
147
SUSPENSION TO SUIT<br />
Land Rover Defender<br />
90 Series<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER DEFENDER 90 SERIES<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12080GR 2<br />
Foam Cell - Performance 24080FE 2<br />
Foam Cell Pro - Performance 45080FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 80kg LAND009B 1<br />
STEERING DAMPER<br />
Foam Cell 3532 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Suits 1987+ 1145SK 1<br />
• May cause driveline vibration on 1998+ models<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12640GR 2<br />
Foam Cell - Performance 24640FE 2<br />
Foam Cell Pro - Performance 45640FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg LAND011B 1<br />
Heavy 45mm 300kg - GVM LAND011C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
LAND009BKG<br />
LAND009BKF<br />
LAND009BKP<br />
LAND009CKG<br />
LAND009CKF<br />
LAND009CKP<br />
Shock Absorbers<br />
Coil Springs<br />
148 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER RANGE ROVER - 1971-1995<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12080GR 2<br />
Foam Cell - Performance 24080FE 2<br />
Foam Cell Pro - Performance 45080FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg LAND009B 1<br />
Heavy 40mm 50 - 110kg LAND007B 1<br />
STEERING DAMPER<br />
Foam Cell 3511 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Suits 1986+ 1145SK 1<br />
• May cause driveline vibration in automatic transmission models<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12640GR 2<br />
Foam Cell - Performance 24640FE 2<br />
Foam Cell Pro - Performance 45640FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg LAND011B 1<br />
Heavy 40mm 300kg - GVM LAND011C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
(Coil Springs)<br />
1971 to 1995<br />
LAND009BKG<br />
LAND009BKF<br />
LAND009BKP<br />
LAND009CKG<br />
LAND009CKF<br />
LAND009CKP<br />
SUSPENSION TO SUIT<br />
Land Rover Range Rover<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
149
ACCESSORIES TO SUIT<br />
Land Rover Discovery Series 2, 3 and 4<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT LAND ROVER DISCOVERY SERIES 2, 3, 4<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 900mm - Fits Discovery 2 Only<br />
Single Drawer - 900mm<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ITD900<br />
ISD900<br />
IDIFFBRE<br />
150 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER DISCOVERY SERIES 3 - 2004-2009<br />
FRONT SUSPENSION<br />
Series 3 LR3 (Coil Springs)<br />
2004 to 2009<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 50kg LAND019B 1<br />
Heavy 45mm 50 - 100kg LAND019C 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 200kg LAND020B 1<br />
Heavy 45mm 200kg - GVM LAND020C 1<br />
SUSPENSION TO SUIT<br />
Land Rover Discovery<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
151
SUSPENSION TO SUIT<br />
Land Rover Discovery<br />
Series 2 (Coil Springs)<br />
1999 to 2005<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER DISCOVERY SERIES 2 - 1999-2005<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12776GR 2<br />
Foam Cell - Performance 24776FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg LAND014B 1<br />
Heavy 40mm 50 - 110kg LAND009B 1<br />
STEERING DAMPER<br />
Foam Cell 3502 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12777GR 2<br />
Foam Cell - Performance 24777FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg LAND011B 1<br />
Heavy 40mm 300kg - GVM LAND011C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
LAND014BKG<br />
LAND014BKF<br />
LAND014CKG<br />
LAND014CKF<br />
Shock Absorbers<br />
Coil Springs<br />
152 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT LAND ROVER DISCOVERY SERIES 1 - 1989-1998<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12080GR 2<br />
Foam Cell - Performance 24080FE 2<br />
Foam Cell Pro - Performance 45080FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg LAND009B 1<br />
Heavy 40mm 50 - 110kg LAND007B 1<br />
STEERING DAMPER<br />
Foam Cell 3511 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit 1145SK 1<br />
• May cause driveline vibration in automatic transmission models<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12640GR 2<br />
Foam Cell - Performance 24640FE 2<br />
Foam Cell Pro - Performance 45640FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg LAND011B 1<br />
Heavy 40mm 300kg - GVM LAND011C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Series 1<br />
1989 to 1998<br />
LAND009BKG<br />
LAND009BKF<br />
LAND009BKP<br />
LAND009CKG<br />
LAND009CKF<br />
LAND009CKP<br />
SUSPENSION TO SUIT<br />
Land Rover Discovery<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
153
ACCESSORIES AND SUSPENSION TO SUIT<br />
LDV T60<br />
2.8L Turbo Diesel<br />
2017+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT LDV T60 - 2017+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe - (2017 to 2021 only)<br />
Proguard No Loop - (2017 to 2021 only)<br />
Proguard Single Loop Kit<br />
Proguard Triple Loop Kit<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
Sports Bar Adaptor<br />
ATLAS ROOF RACK KITS<br />
Crossbar (x 2) and Fit Kit - 1375mm Width<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
SEAT COVER<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD068<br />
BBT068-NL<br />
BB068-SL<br />
BB068-TL<br />
ISLIDEAWAY068-E<br />
ISLIDEAWAY068-SBA<br />
IFRK094<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
SUSPENSION TO SUIT LDV - 2017+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12745GR 2<br />
Foam Cell Strut - Performance 24745FE 2<br />
Foam Cell Pro Strut - Performance 45745FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg HOLD020A 1<br />
Heavy 40mm 50 - 110kg HOLD020B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA041FA-2 1<br />
• Does not suit models with Headlight Sensor Bracket on Upper Control Arm<br />
154 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2.8L Turbo Diesel<br />
2017+<br />
Product Description Part No. Qty<br />
Req<br />
LDV T60<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 200kg HOLD021A 2<br />
Heavy 45mm 200 - 400kg HOLD021B 2<br />
Extra Heavy 45mm 400kg - 800kg HOLD021C 2<br />
Super Heavy 45mm 800kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
SPACER KIT<br />
Headlight Bracket Extension Kit 1207K 1<br />
Centre Bearing Spacer Kit 1208K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1148 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
Super Heavy - Nitro Gas<br />
Super Heavy - Foam Cell<br />
Super Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
HOLD021AKG2<br />
HOLD021AKF2<br />
HOLD021AKP2<br />
HOLD021BKG2<br />
HOLD021BKF2<br />
HOLD021BKP2<br />
HOLD021CKG2<br />
HOLD021CKF2<br />
HOLD021CKP2<br />
HOLD021DKG2<br />
HOLD021DKF2<br />
HOLD021DKP2<br />
Shock Absorbers Coil Springs U-Bolts Headlight Bracket Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
155
SUSPENSION TO SUIT<br />
Mahindra Scorpio<br />
Getaway Pik-Up<br />
2002 to 2016<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MAHINDRA SCORPIO GETAWAY PIK-UP - 2002-2016<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
TORSION BAR<br />
Uprated Torsion Bars MAH001 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 2002 - 2012 12749GR 2<br />
Nitro Gas - Performance 2012+ 12731GR 2<br />
• Check shock absorber specifications, some models can vary<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg MAH002B 2<br />
U-BOLTS<br />
U-Bolt Kit 1103UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left side 353LH 1<br />
Greasable Shackle Right side 353RH 1<br />
Greasable Pin 1149 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
• Check rear shock absorber part number<br />
MAH002BKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
156 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MAHINDRA SCORPIO WAGON - 2002-2014<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
TORSION BAR<br />
Uprated Torsion Bars MAH001 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12749GR 2<br />
• Check shock absorber specifications, some models can vary<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg MAH003B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
Wagon<br />
2002 to 2014<br />
MAH003BKG<br />
SUSPENSION TO SUIT<br />
Mahindra Scorpio<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
157
Product Description Part No. Qty<br />
Req<br />
go prepared<br />
BULL BARS | SUSPENSION | RECOVERY POINTS<br />
for a full range of 4x4 accessories visit our website<br />
www.ironman4x4.com
ACCESSORIES TO SUIT<br />
6/2020+<br />
Mazda BT50<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MAZDA BT50 - 6/2020+<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC080<br />
Commercial Deluxe<br />
BBCD080<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR080<br />
Proguard No Loop<br />
BBT080-NL<br />
Proguard Single Loop Kit<br />
BB080-SL<br />
Proguard Triple Loop Kit<br />
BB080-TL<br />
Driving Light / Lightbar Patch Loom<br />
IPLS074<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL074<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps - Dimple Step Design<br />
SS074-D<br />
Side Rails<br />
SS074 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR074-D<br />
TOWING<br />
Class 4 Towbar<br />
TB080<br />
Rear Protection Towbar<br />
RTB080<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL074<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points (Pair)<br />
IRP080<br />
SNORKEL<br />
6/2020+ ISNORKEL080<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Electric Steering Model<br />
UBP074S<br />
Engine Bay and Transmission - Non-Electric Steering Model<br />
UBP074<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW074<br />
*Designed to suit factory tubs, will not suit ute liner without modification<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY074-P<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY080-E<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR074PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab Only) - 1250mm Width<br />
IFR074C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab Only)<br />
IFF6080<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT074-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC074-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC074-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD074<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
159
SUSPENSION TO SUIT<br />
Mazda BT50 6/2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MAZDA BT50 - 6/2020+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12845GR 2<br />
Foam Cell Strut - Performance 24845FE 2<br />
Foam Cell Pro Strut - Performance 45845FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg HOLD020S 1<br />
Light 30mm 0 - 50kg HOLD020A 1<br />
Medium 40mm 0 - 50kg HOLD020B 1<br />
Heavy 40mm 50 - 110kg HOLD020C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST017 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA074FA-2 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12698GRC 2<br />
Nitro Gas - Performance 12698GR 2<br />
Nitro Gas - Professional 12698GRP 2<br />
Foam Cell - Comfort 24698FEC 2<br />
Foam Cell - Performance 24698FE 2<br />
Foam Cell - Professional 24698FEP 2<br />
Foam Cell Pro - Comfort 45698FEC 2<br />
Foam Cell Pro - Performance 45698FE 2<br />
Foam Cell Pro - Professional 45698FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg HOLD021A 2<br />
Medium 45mm 0 - 300kg HOLD021B 2<br />
Heavy 45mm 300kg - 600kg HOLD021C 2<br />
Extra Heavy 45mm 600kg - GVM HOLD021D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
U-Bolt Kit Suits HOLD021D 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 770UK 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1152K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1156 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
160 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
6/2020+<br />
Mazda BT50<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
HOLD021AKG3<br />
HOLD021AKF3<br />
HOLD021AKP3<br />
HOLD021BKG3<br />
HOLD021BKF3<br />
HOLD021BKP3<br />
HOLD021CKG3<br />
HOLD021CKF3<br />
HOLD021CKP3<br />
HOLD021DKG3<br />
HOLD021DKF3<br />
HOLD021DKP3<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Brake Hose Relocation Kit<br />
Strut Shock Absorbers Leaf Springs U-Bolts<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 407<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
161
ACCESSORIES TO SUIT<br />
Mazda BT50<br />
2012 to 5/2020<br />
Includes 5/2018 (Facelift)<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MAZDA BT50 - 2012-5/2020<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC039<br />
Commercial Deluxe<br />
BBCD039<br />
Proguard No Loop<br />
BBT039-NL<br />
Proguard Single Loop Kit<br />
BB054-SL<br />
Proguard Triple Loop Kit<br />
BB039-TL<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps Rails<br />
SSR039<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB066<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB066<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE001<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL039<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP054<br />
BATTERY TRAY - DUAL CAB ONLY<br />
Suits 10”Battery<br />
IBTRAY054<br />
LONG RANGE FUEL TANK<br />
140L* - Fits 3.2L Diesel only TANK007<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP054<br />
Engine Bay and Transmission - DPF Models (Retains factory transmission plate)<br />
UBP055<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
IUP014K<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW037<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
162 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
2012 to 5/2020<br />
Includes 5/2018 (Facelift)<br />
Product Description Part No. Qty<br />
Req<br />
Mazda BT50<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed CANOPY010-P †<br />
Winning Blue (WVV)<br />
CANOPY010-WB<br />
Magnetic Grey (WVQ) CANOPY010-M †<br />
Jet Black Mica (41W)<br />
CANOPY018-B<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• Includes tub strengthening bracket (CANOPY010 BRACKET)<br />
• Colour code and build date must be confirmed for Aluminium Metallic Canopies (CANOPY010-AM)<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
† With central locking<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Frozen White (WVZ)<br />
CANFIBRE054-FW<br />
Magnetic Grey (WVQ)<br />
CANFIBRE054-M<br />
Shadow Black (UO)<br />
CANFIBRE054-SB<br />
CANOPY - PINNACLE 2 SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY054-P<br />
Aluminium Metallic (SWR) (38P)<br />
ICANOPY054-AM<br />
Arctic White (SWU)<br />
ICANOPY054-AW<br />
Blue Lightning (SW3)<br />
ICANOPY054-BL<br />
Frozen White (WVZ)<br />
ICANOPY054-FW<br />
Meteor Grey (42A) (SWT)<br />
ICANOPY054-G<br />
Shadow Black (UO)<br />
ICANOPY054-SB<br />
* Pre-primed canopies, plus colour coding.<br />
TUB STRENGTHENING BRACKET<br />
To suit all Canopies - (Must be fitted)<br />
CANOPY010 BRACKET<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY054-E<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR054PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) -1250mm Width<br />
IFR054C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab with Side Indicator Light Only)<br />
IFF6039I<br />
Matte Black Smooth Finish 6” (Suits Dual Cab Only)<br />
IFF6039<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
163
SUSPENSION TO SUIT<br />
Mazda BT50 2011 to 5/2020<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MAZDA BT50 - 2011-5/2020<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12727GR 2<br />
Foam Cell Strut - Performance 24727FE 2<br />
Foam Cell Pro Strut - Performance 45727FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg FOR001S 1<br />
Light 35mm 0 - 50kg FOR001A 1<br />
Medium 40mm 0 - 50kg FOR001B 1<br />
Heavy 45mm 50 - 110kg FOR001C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST014 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA054FA-2 1<br />
SPACER KIT<br />
Sway Bar Relocation Kit 1203K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR002A 2<br />
Medium 45mm 0 - 300kg FOR002B 2<br />
Heavy 45mm 300kg - GVM FOR002C 2<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1193UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1194K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
164 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2011 to 5/2020<br />
Mazda BT50<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur due to increased ride height, use 1194K to reduce vibration to satisfactory level.<br />
FOR001AKG<br />
FOR001AKF<br />
FOR001AKP<br />
FOR001BKG<br />
FOR001BKF<br />
FOR001BKP<br />
FOR001CKG<br />
FOR001CKF<br />
FOR001CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
165
ACCESSORIES TO SUIT<br />
Mazda BT50<br />
J97M<br />
2006 to 2011<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MAZDA BT50 - 2006-2011<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD024<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps<br />
SS009<br />
Side Steps and Rails<br />
SSR007<br />
SNORKEL<br />
3.0L TDi Diesel ISNORKEL024<br />
LONG RANGE FUEL TANK<br />
122L* - Fits Dual and Single Cab only TANK006<br />
* Usable volume may differ to the stated tank capacity<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
166 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2006 to 2011<br />
Mazda BT50<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MAZDA BT50 - 2006-2011<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
Foam Cell Pro - Performance 45667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars Duratorq Engine MAZDA014 1<br />
Uprated Torsion Bars 2.5L WLT Engine MAZDA005 1<br />
• MAZDA014 is 1024mm in length, used on most vehicles. Vehicles with 2.5L WLT Engine use MAZDA005 (924mm) Torsion Bar<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 100kg MAZDA041A 2<br />
Medium 40mm 0 - 200kg MAZDA041B 2<br />
Heavy 40mm 200 - 400kg MAZDA041C 2<br />
Extra Heavy 40mm 400kg - GVM MAZDA041D 2<br />
U-BOLTS<br />
U-Bolt Kit 417UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 759UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
• Check Torsion Bar length before ordering<br />
MAZDA041AKG<br />
MAZDA041AKF<br />
MAZDA041AKP<br />
MAZDA041BKG<br />
MAZDA041BKF<br />
MAZDA041BKP<br />
MAZDA041CKG<br />
MAZDA041CKF<br />
MAZDA041CKP<br />
MAZDA041DKG<br />
MAZDA041DKF<br />
MAZDA041DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
167
Product Description Part No. Qty<br />
Req<br />
Outlasting the Outback
SUSPENSION TO SUIT<br />
Bravo<br />
1987 to 2006<br />
Product Description Part No. Qty<br />
Req<br />
Mazda B Series<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MAZDA B SERIES BRAVO - 1987-2006<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
Foam Cell Pro - Performance 45667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MAZDA005 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12095GRC 2<br />
Nitro Gas - Performance 12095GR 2<br />
Foam Cell - Comfort 24095FEC 2<br />
Foam Cell - Performance 24095FE 2<br />
Foam Cell - Professional 24095FEP 2<br />
Foam Cell Pro - Comfort 45095FEC 2<br />
Foam Cell Pro - Performance 45095FE 2<br />
Foam Cell Pro - Professional 45095FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 100kg MAZDA006A 2<br />
Medium 40mm 0 - 200kg MAZDA006B 2<br />
Heavy 40mm 200 - 400kg MAZDA006C 2<br />
Extra Heavy 40mm 400kg - GVM MAZDA006D 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 756UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-1 2<br />
Greasable Pin 794 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
MAZDA006AKG<br />
MAZDA006AKF<br />
MAZDA006AKP<br />
MAZDA006BKG<br />
MAZDA006BKF<br />
MAZDA006BKP<br />
MAZDA006CKG<br />
MAZDA006CKF<br />
MAZDA006CKP<br />
MAZDA006DKG<br />
MAZDA006DKF<br />
MAZDA006DKP<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
169
SUSPENSION TO SUIT<br />
Mercedes-Benz G-Wagen<br />
W460, W461, W463<br />
1979+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MERCEDES-BENZ G-WAGEN W460, W461, W463 - 1979+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12811GR 2<br />
Foam Cell - Performance 24811FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 50kg MERC020B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12812GR 2<br />
Foam Cell - Performance 24812FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg MERC021B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
MERC021BKG<br />
MERC021BKF<br />
Shock Absorbers<br />
Coil Springs<br />
170 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
G55 AMG<br />
Mercedes-Benz G-Wagen<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MERCEDES-BENZ G-WAGEN G55 AMG<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell - Performance 24788FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 50kg MERC015B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell - Performance 24789FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg MERC016B 1<br />
SUSPENSION KIT<br />
Medium - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
MERC015BKF<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
171
SUSPENSION TO SUIT<br />
Mercedes-Benz Unimog<br />
UL1700, 2450, U5000<br />
1300, 1550, U4000<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MERCEDES-BENZ UNIMOG<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro - Performance 10 Bolt Axle Models 45802FE 2<br />
Foam Cell Pro - Performance 6 Bolt Axle Models 45803FE 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro - Performance 10 Bolt Axle Models 45802FE 2<br />
Foam Cell Pro - Performance 6 Bolt Axle Models 45803FE 2<br />
172 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MERCEDES-BENZ X-CLASS - 2017-5/2020<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard Height 0mm 0 - 50kg NISS040A 1<br />
Light 20mm 0 - 50kg NISS040B 1<br />
Medium 35mm 0 - 80kg NISS040C 1<br />
Heavy 40mm 50 - 110kg NISS040D 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12728GR 2<br />
Foam Cell - Performance 24728FE 2<br />
Foam Cell - Professional 24728FEP 2<br />
Foam Cell Pro - Comfort 45728FEC 2<br />
Foam Cell Pro - Performance 45728FE 2<br />
Foam Cell Pro - Professional 45728FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 20mm 0 - 200kg NISS058A 1<br />
Medium 40mm 0 - 300kg NISS058B 1<br />
Heavy 40mm 300kg - 600kg NISS058C 1<br />
Extra Heavy 45mm 600kg - GVM NISS058D 1<br />
COIL SPACER<br />
Polyurethane 20mm NAVR20 2<br />
SPACER KIT<br />
Sway Bar and Headlight Bracket Extension Kit 1204K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
4 Cyl Models<br />
2017 to 5/2020<br />
NISS058BKG<br />
NISS058BKF<br />
NISS058BKP<br />
NISS058CKG<br />
NISS058CKF<br />
NISS058CKP<br />
NISS058DKG<br />
NISS058DKF<br />
NISS058DKP<br />
SUSPENSION TO SUIT<br />
Mercedes-Benz X-Class<br />
Shock Absorbers<br />
Strut Shock Absorbers<br />
Coil Springs<br />
Sway Bar and Headlight Bracket Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
173
ACCESSORIES TO SUIT<br />
Mitsubishi Pajero Sport 7/2019+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI PAJERO SPORT - 7/2019+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD079<br />
Proguard No Loop<br />
BBT079-NL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL079<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS079<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP059<br />
SNORKEL<br />
7/2019+ ISNORKEL067<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP050<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
IFR079PEK<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
174 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
7/2019+<br />
Mitsubishi Pajero Sport<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO SPORT - 7/2019+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 15mm 0 - 50kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 50kg MITS045B * 1<br />
Heavy 30mm 50 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 50 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12645GRS 2<br />
Foam Cell - Performance 24645FES 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 15mm 0 - 200kg MITS042A 1<br />
Medium 30mm 0 - 250kg MITS042B 1<br />
Medium - with Accessories 40mm 250-500kg MITS020B 1<br />
Heavy 40mm 300kg - GVM MITS042C 1<br />
• Check LHS rear coil captivity when lowering to ground<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
• Please note limited lift height, due to restrictions in vehicle design.<br />
MITS042BKG1<br />
MITS042BKF1<br />
MITS042CKG1<br />
MITS042CKF1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
175
ACCESSORIES TO SUIT<br />
Mitsubishi Pajero Sport 11/2016 to 6/2019<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI PAJERO SPORT - 11/2016-6/2019<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe* - Suits GLX and GLS<br />
Exceed Kit - Required for Exceed model<br />
Proguard No Loop<br />
Proguard Single Loop Kit<br />
Proguard Triple Loop Kit<br />
Bull Bar Multi-Function Light Patch Loom<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
* Do not fit winch control box in front of Mitsubishi Badge for vehicles with Radar.<br />
STEEL SIDE STEPS AND RAILS - BODY MOUNT ONLY DUE TO ELECTRIC HANDBRAKE<br />
Side Steps<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD059<br />
BB059-EXCEEDKIT<br />
BBT059-NL<br />
BB059-SL<br />
BB059-TL<br />
IBBPL079<br />
IPL059<br />
SS059<br />
IRP059<br />
IDIFFBRE<br />
176 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO SPORT - 2015-6/2019<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 15mm 0 - 50kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 50kg MITS045B * 1<br />
Heavy 30mm 50 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 50 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12645GRS 2<br />
Foam Cell - Performance 24645FES 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 15mm 0 - 200kg MITS042A 1<br />
Medium 30mm 0 - 250kg MITS042B 1<br />
Medium - with Accessories 40mm 250-500kg MITS020B 1<br />
Heavy 40mm 300kg - GVM MITS042C 1<br />
• Check LHS rear coil captivity when lowering to ground<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
• Please note limited lift height, due to restrictions in vehicle design.<br />
2.4L Mivec<br />
2015 to 6/2019<br />
MITS042BKG1<br />
MITS042BKF1<br />
MITS042CKG1<br />
MITS042CKF1<br />
SUSPENSION TO SUIT<br />
Mitsubishi Pajero Sport<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
177
ACCESSORIES TO SUIT<br />
Mitsubishi Pajero<br />
NW 2011 to NX<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI PAJERO - 2011-NX<br />
STEEL WINCH BULL BARS - NOT SUITABLE FOR VEHICLES WITH FACTORY FITTED HEADLIGHT WASHERS (DRL’S NOT COMPATIBLE)<br />
Commercial Deluxe<br />
BBCD045<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
178 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
NM, NP, NS, NT<br />
5/2000 to 2011<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI PAJERO - 5/2000-2011<br />
STEEL WINCH BULL BARS - NOT SUITABLE FOR VEHICLES WITH FACTORY FITTED HEADLIGHT WASHERS (DRL’S NOT COMPATIBLE)<br />
Commercial Deluxe - Fits NS and NT models only<br />
BBCD045<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
ACCESSORIES TO SUIT<br />
Mitsubishi Pajero<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
179
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Montero NM-NX<br />
2000+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 2000+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12713GR 2<br />
Foam Cell Strut - Performance 24713FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg MITS038B 1<br />
Heavy - Diesel 40mm 50 - 100kg MITS038C 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12714GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 40mm 0 - 200kg MITS039A 1<br />
Medium - LWB 40mm 0 - 200kg MITS039B 1<br />
Heavy 40mm 200kg - GVM MITS039C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB MITS038AKG<br />
Medium - Nitro Gas LWB Petrol MITS038BKG<br />
Medium - Nitro Gas LWB Diesel MITS038CKG<br />
Heavy - Nitro Gas LWB Petrol MITS038CKG1<br />
Heavy - Nitro Gas LWB Diesel MITS038CKG2<br />
• Vehicles with monocoque body construction can be subject to increased NVH (Noise) with upgraded suspension installed<br />
• Vehicles with independent suspension must maintain a minimum of 60mm downward suspension travel<br />
• Mandatory 4 wheel alignment after installing new suspension<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
180 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 1999+<br />
FRONT SUSPENSION<br />
iO Pinin<br />
1999+<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg MITS034B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER14 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 200kg MITS035B 1<br />
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
181
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Montero NH-NL (Coil)<br />
6/1991 to 2000<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 6/1991-2000<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars 1278mm Length MITS013 1<br />
Uprated Torsion Bars 1308mm Length MITS019 1<br />
• Check Torsion Bar length before ordering<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12646GR 2<br />
Foam Cell - Performance 24646FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 40mm 0 - 200kg MITS022B 1<br />
Medium - LWB 40mm 0 - 200kg MITS020B 1<br />
Heavy 40mm 200kg - GVM MITS020C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas SWB MITS022BKG2<br />
Medium - Nitro Gas LWB MITS020BKG2<br />
Medium - Foam Cell SWB MITS022BKF2<br />
Medium - Foam Cell LWB MITS020BKF2<br />
Heavy - Nitro Gas<br />
MITS020CKG2<br />
Heavy - Foam Cell<br />
MITS020CKF2<br />
• Check Torsion Bar length before ordering<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Torsion Bars<br />
182 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 1991-1999<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars 1278mm Length MITS013 1<br />
Uprated Torsion Bars 1308mm Length MITS019 1<br />
• Check Torsion Bar length before ordering<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg MITS018B 2<br />
Heavy 40mm 300kg - GVM MITS018C 2<br />
• Must use Ironman 4x4 bushes<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715TUK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Greasable Pin 796 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
• Check Torsion Bar length before ordering<br />
Montero NH-NL (Leaf)<br />
1991 to 1999<br />
MITS018BKG2<br />
MITS018BKF2<br />
MITS018CKG2<br />
MITS018CKF2<br />
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
183
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Montero NA-NG (Coil)<br />
1988 to 1991<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 1988-1991<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12082GR 2<br />
Foam Cell - Performance 24082FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars 1278mm Length MITS013 1<br />
Uprated Torsion Bars 1308mm Length MITS019 1<br />
• Check Torsion Bar length before ordering<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12645GRC 2<br />
Nitro Gas - Performance 12645GR 2<br />
Foam Cell - Comfort 24645FEC 2<br />
Foam Cell - Performance 24645FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 40mm 0 - 200kg MITS022B 1<br />
Medium - LWB 40mm 0 - 200kg MITS020B 1<br />
Heavy 40mm 200kg - GVM MITS020C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas SWB MITS022BKG1<br />
Medium - Nitro Gas LWB MITS020BKG1<br />
Medium - Foam Cell SWB MITS022BKF1<br />
Medium - Foam Cell LWB MITS020BKF1<br />
Heavy - Nitro Gas<br />
MITS020CKG1<br />
Heavy - Foam Cell<br />
MITS020CKF1<br />
• Check Torsion Bar length before ordering<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
184 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - PRE 1991<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12082GR 2<br />
Foam Cell - Performance 24082FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars 1278mm Length MITS013 1<br />
Uprated Torsion Bars 1308mm Length MITS019 1<br />
• Check Torsion Bar length before ordering<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg MITS018B 2<br />
Heavy 45mm 300kg - GVM MITS018C 2<br />
• Must use Ironman 4x4 bushes<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Greasable Pin 796 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
• Check Torsion Bar length before ordering<br />
Montero NA-NG (Leaf)<br />
Pre 1991<br />
MITS018BKG1<br />
MITS018BKF1<br />
MITS018CKG1<br />
MITS018CKF1<br />
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
185
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 2009-2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard Height 0mm 0 - 50kg MITS040S 1<br />
Light 35mm 0 - 50kg MITS040A 1<br />
Medium 40mm 0 - 80kg MITS040B 1<br />
Heavy 40mm 80 - 110kg MITS040C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12645GRS 2<br />
Foam Cell - Performance 24645FES 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 250kg MITS042S 1<br />
Light 20mm 0 - 250kg MITS042A 1<br />
Medium 40mm 0 - 250kg MITS042B 1<br />
Heavy 40mm 250kg - GVM MITS042C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Standard - Nitro Gas<br />
Standard - Foam Cell<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Pajero Sport /<br />
Montero Sport / Dakar PB<br />
2009 to 2015<br />
MITS042SKG<br />
MITS042SKF<br />
MITS042AKG<br />
MITS042AKF<br />
MITS042BKG<br />
MITS042BKF<br />
MITS042CKG<br />
MITS042CKF<br />
Shock Absorbers<br />
Strut Shock Absorbers<br />
Coil Springs<br />
186 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 1998-2008<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MITS019 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12645GRC 2<br />
Nitro Gas - Performance 12645GR 2<br />
Foam Cell - Comfort 24645FEC 2<br />
Foam Cell - Performance 24645FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg MITS022B 1<br />
Heavy 40mm 200-400kg MITS020B 1<br />
Extra Heavy 40mm 400kg - GVM MITS020C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Challenger / Montero Sport PA (Coil)<br />
1998 to 2008<br />
MITS022BKG<br />
MITS022BKF<br />
MITS020BKG<br />
MITS020BKF<br />
MITS020CKG<br />
MITS020CKF<br />
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Shock Absorbers<br />
Coil Springs<br />
Torsion Bars<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
187
SUSPENSION TO SUIT<br />
Mitsubishi Pajero<br />
Montero Sport (Leaf)<br />
1998 to 2006<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI PAJERO - 1998-2006<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MITS019 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg MITS018B 2<br />
Heavy 40mm 300kg - GVM MITS018C 2<br />
• Must use Ironman 4x4 bushes<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715STUK 1<br />
• Not compatible with OEM springs<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Greasable Pin 796 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
MITS018BKG<br />
MITS018BKF<br />
MITS018CKG<br />
MITS018CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
188 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI DELICA - 1994+<br />
FRONT SUSPENSION<br />
L400<br />
1994+<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MITS031 1<br />
• Torsion Bars suit vehicles 5/1994-5/1999 only<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance Without ECS 12698GR 2<br />
Nitro Gas - Performance With ECS 12671GR 2<br />
• ECS - Electronic Control Suspension<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 250kg MITS025B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas Without ECS MITS031BKG<br />
Medium - Nitro Gas With ECS MITS031BKG1<br />
• Shock Absorbers do not re-connect to ECS system<br />
SUSPENSION TO SUIT<br />
Mitsubishi Delica<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Torsion Bars<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
189
ACCESSORIES TO SUIT<br />
Mitsubishi Triton<br />
MR<br />
11/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI TRITON MR - 11/2018+<br />
STEEL WINCH BULL BARS (INCLUDING GLS PREMIUM)<br />
Commercial<br />
BBC067<br />
Commercial Deluxe<br />
BBCD067<br />
Proguard No Loop<br />
BBT067-NL<br />
Proguard Single Loop Kit<br />
BB067-SL<br />
Proguard Triple Loop Kit<br />
BB067-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL067<br />
Driving Light / Lightbar Patch Loom<br />
IPLS067<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL067<br />
Load Resistor Kit with Mounting Brackets for Indicator / Parker Replacement<br />
LR12V21W<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL AND CLUB CAB<br />
Side Steps<br />
SS050<br />
Side Rails<br />
SS050 RAIL<br />
Side Steps and Rails<br />
SSR050<br />
TOWING (GLS MODEL ONLY)<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB050<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB067GLS<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL067<br />
TOWING (NOT GLS MODEL)<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB050<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB067GLX<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL067<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair) (Includes GLS Premium)<br />
IRP059<br />
SNORKEL<br />
MR Triton - GLS and GSR only. Not compatible with GLX model<br />
ISNORKEL067<br />
BATTERY TRAY<br />
Suits 12” Battery<br />
IBTRAY050<br />
LONG RANGE FUEL TANK<br />
125L* Diesel only - Fits Dual and Extra Cab only TANK004<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP050<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Not compatible with bull bars. - While Stocks Last<br />
IUP050K<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW050<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
190 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
MR<br />
11/2018+<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Mitsubishi Triton<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre Primed<br />
CANOPY014-P<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Black Mica (X08)<br />
CANFIBRE050-BM<br />
Impulse Blue (D23)<br />
CANFIBRE050-IB<br />
Graphite Grey (U28)<br />
CANFIBRE050-GG<br />
Sterling Silver (U25)<br />
CANFIBRE050-SS<br />
White Solid (W32)<br />
CANFIBRE050-WS<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY050-P<br />
Black Mica (X08)<br />
ICANOPY050-BM<br />
Graphite Grey (U28)<br />
ICANOPY050-GG<br />
Impulse Blue (D23)<br />
ICANOPY050-IB<br />
Sterling Silver (U25)<br />
ICANOPY050-SS<br />
Titanium Grey (U17)<br />
ICANOPY050-TG<br />
White Solid (W32)<br />
ICANOPY050-WS<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY067-E<br />
Manual Operation<br />
ISLIDEAWAY067-M<br />
Sports Bar Adaptor<br />
ISLIDEAWAY067-SBA<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR067PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
IFR067C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab)<br />
IFF6067<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT067-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC067-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC067-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD067<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
191
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
MR L200<br />
11/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON MR - 11/2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg MITS040S 1<br />
Light 25mm 0 - 50kg MITS040A 1<br />
Medium 30mm 0 - 80kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 80kg MITS045B * 1<br />
Heavy 30mm 80 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 80 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
192 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
MR L200<br />
11/2018+<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12729GRC 2<br />
Nitro Gas - Performance 12729GR 2<br />
Nitro Gas - Professional 12729GRP 2<br />
Foam Cell - Comfort 24729FEC 2<br />
Foam Cell - Performance 24729FE 2<br />
Foam Cell - Professional 24729FEP 2<br />
Foam Cell Pro - Comfort 45729FEC 2<br />
Foam Cell Pro - Performance 45729FE 2<br />
Foam Cell Pro - Professional 45729FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg MITS047A 2<br />
Medium 30mm 0 - 300kg MITS047B 2<br />
Heavy 30mm 300kg - GVM MITS047C 2<br />
• Two piece tailshaft models may experience driveline vibration, use 1201K to reduce vibration.<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
U-Bolt Kit Suits MITS047C 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1200UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1201K 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1205K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1199 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Two piece tailshaft models may experience driveline vibration, use 1201K to reduce vibration<br />
MITS047AKG<br />
MITS047AKF<br />
MITS047BKG<br />
MITS047BKF<br />
MITS047BKP<br />
MITS047CKG<br />
MITS047CKF<br />
MITS047CKP<br />
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Upper Control Arms (Foam Cell Pro Kits Only) Brake Hose Relocation Kit<br />
Leaf Springs U-Bolts Polyurethane Spring Bushes Centre Bearing Spacer Kit<br />
Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
193
ACCESSORIES TO SUIT<br />
Mitsubishi Triton<br />
MQ<br />
2015 to 10/2018<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI TRITON MQ - 2015-10/2018<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC050<br />
Commercial Deluxe<br />
BBCD050<br />
Proguard No Loop<br />
BBT050-NL<br />
Proguard Single Loop Kit<br />
BB050-SL<br />
Proguard Triple Loop Kit<br />
BB050-TL<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL050<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL AND CLUB CAB<br />
Side Steps<br />
SS050<br />
Side Rails<br />
SS050 RAIL<br />
Side Steps and Rails<br />
SSR050<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB050<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB050<br />
Rear Protection Towbar Plates<br />
RTBPLATE050<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL050<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP050<br />
SNORKEL<br />
Triton MQ 2015-10/2018 Only - Suits 2.4L Diesel Only<br />
ISNORKEL050<br />
BATTERY TRAY<br />
Suits 12” Battery<br />
IBTRAY050<br />
LONG RANGE FUEL TANK<br />
125L* Diesel only - Fits Dual and Extra Cab only TANK004<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP050<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Not compatible with bull bars. - While Stocks Last<br />
IUP050K<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW050<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
194 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
MQ<br />
2015 to 10/2018<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Mitsubishi Triton<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre Primed<br />
CANOPY014-P<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Black Mica (X08)<br />
CANFIBRE050-BM<br />
Impulse Blue (D23)<br />
CANFIBRE050-IB<br />
Titanium Grey (U17)<br />
CANFIBRE050-TG<br />
Sterling Silver (U25)<br />
CANFIBRE050-SS<br />
White Solid (W32)<br />
CANFIBRE050-WS<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY050-P<br />
Black Mica (X08)<br />
ICANOPY050-BM<br />
Graphite Grey (U28)<br />
ICANOPY050-GG<br />
Impulse Blue (D23)<br />
ICANOPY050-IB<br />
Sterling Silver (U25)<br />
ICANOPY050-SS<br />
Titanium Grey (U17)<br />
ICANOPY050-TG<br />
White Solid (W32)<br />
ICANOPY050-WS<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY067-E<br />
Manual Operation<br />
ISLIDEAWAY067-M<br />
Sports Bar Adaptor<br />
ISLIDEAWAY067-SBA<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR067PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
IFR067C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab)<br />
IFF6050<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT067-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC067-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC067-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD067<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
195
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
MQ L200<br />
2015 to 10/2018<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON MQ - 2015-10/2018<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg MITS040S 1<br />
Light 25mm 0 - 50kg MITS040A 1<br />
Medium 30mm 0 - 80kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 80kg MITS045B * 1<br />
Heavy 30mm 80 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 80 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
196 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
MQ L200<br />
2015 to 10/2018<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12729GRC 2<br />
Nitro Gas - Performance 12729GR 2<br />
Nitro Gas - Professional 12729GRP 2<br />
Foam Cell - Comfort 24729FEC 2<br />
Foam Cell - Performance 24729FE 2<br />
Foam Cell - Professional 24729FEP 2<br />
Foam Cell Pro - Comfort 45729FEC 2<br />
Foam Cell Pro - Performance 45729FE 2<br />
Foam Cell Pro - Professional 45729FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg MITS047A 2<br />
Medium 30mm 0 - 300kg MITS047B 2<br />
Heavy 30mm 300kg - GVM MITS047C 2<br />
• Two piece tailshaft models may experience driveline vibration, use 1201K to reduce vibration.<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
U-Bolt Kit Suits MITS047C 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1200UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1201K 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1205K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1199 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Two piece tailshaft models may experience driveline vibration, use 1201K to reduce vibration<br />
MITS047AKG<br />
MITS047AKF<br />
MITS047BKG<br />
MITS047BKF<br />
MITS047BKP<br />
MITS047CKG<br />
MITS047CKF<br />
MITS047CKP<br />
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Upper Control Arms (Foam Cell Pro Kits Only) Brake Hose Relocation Kit<br />
Leaf Springs U-Bolts Polyurethane Spring Bushes Centre Bearing Spacer Kit<br />
Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
197
Product Description Part No. Qty<br />
Req<br />
Reach for the Sky
MN<br />
2009 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Mitsubishi Triton<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI TRITON MN - 2009-2015<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
BBC031<br />
Commercial Deluxe<br />
BBCD031<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB, EXTRA CAB AND SINGLE CAB<br />
Side Steps<br />
SS031<br />
Side Steps - Dimple Step Design<br />
SS031-D<br />
Side Steps and Rails<br />
SSR031<br />
Side Steps and Rails - Dimple Step Design<br />
SSR031-D<br />
SNORKEL<br />
Triton<br />
ISNORKEL020<br />
LONG RANGE FUEL TANK<br />
125L* Diesel - Fits Dual Cab only TANK004<br />
125L* Petrol - Fits Dual Cab only TANK005<br />
* Usable volume may differ to the stated tank capacity<br />
• Modification required with factory rear diff-lock.<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
Wing Kit - 1300mm*<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ITD1300<br />
ISD1300<br />
ITDW032<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
199
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
MN L200<br />
2009 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON MN - 2009-2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg MITS040S 1<br />
Light 25mm 0 - 50kg MITS040A 1<br />
Medium 30mm 0 - 80kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 80kg MITS045B * 1<br />
Heavy 30mm 80 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 80 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
200 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
MN L200<br />
2009 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg MITS041A 2<br />
Medium 40mm 0 - 300kg MITS041B 2<br />
Heavy 40mm 300kg - GVM MITS041C 2<br />
• Must use Ironman 4x4 bushes.<br />
• Unladen manual vehicles with 2 piece tail shaft may experience vibration in first gear.<br />
U-BOLTS<br />
U-Bolt Kit 1102UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715TUK 1<br />
• Not compatible with OEM springs<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Unladen manual vehicles with 2 piece tail shaft may experience vibration in first gear<br />
MITS041AKG<br />
MITS041AKF<br />
MITS041BKG<br />
MITS041BKF<br />
MITS041BKP<br />
MITS041CKG<br />
MITS041CKF<br />
MITS041CKP<br />
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Strut Shock Absorbers Coil Springs Upper Control Arms (Foam Cell Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
201
ACCESSORIES TO SUIT<br />
Mitsubishi Triton<br />
ML<br />
2006 to 2009<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT MITSUBISHI TRITON ML - 2006-2009<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD016<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB AND EXTRA CAB MODELS ONLY<br />
Side Steps and Rails<br />
SSR031<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW031<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
ML Triton 2006 to 2009<br />
ISNORKEL020<br />
LONG RANGE FUEL TANK<br />
125L* Diesel (Not compatible with factory diff-lock) - Fits Dual Cab only TANK004<br />
125L* Petrol (Not compatible with factory diff-lock) - Fits Dual Cab only TANK005<br />
* Usable volume may differ to the stated tank capacity<br />
• Modification required with factory rear diff-lock.<br />
UNDERBODY PROTECTION<br />
Fuel Tank - While Stocks Last<br />
IUP010F<br />
• Fuel tank protection plates are not compatible with long range fuel tanks.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
202 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ML L200<br />
2006 to 2009<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON ML - 2006-2009<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12715GR 2<br />
Foam Cell Strut - Performance 24715FE 2<br />
Foam Cell Pro Strut - Performance* (SEE NOTE) 45715FE 2<br />
*NOTE: MANDATORY FITMENT of UCA050FA and MITS045B /C Coil Springs with 45715FE<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg MITS040S 1<br />
Light 25mm 0 - 50kg MITS040A 1<br />
Medium 30mm 0 - 80kg MITS040B 1<br />
Medium* (SEE NOTE) 50mm 0 - 80kg MITS045B * 1<br />
Heavy 30mm 80 - 110kg MITS040C 1<br />
Heavy* (SEE NOTE) 50mm 80 - 110kg MITS045C * 1<br />
*NOTE: MANDATORY FITMENT of UCA050FA and 45715FE with (MITS045B /C) Coil Springs<br />
STRUT MOUNTS<br />
Steel Strut Top ISST010 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms* UCA050FA-2 1<br />
*NOTE: May require the fitment of additional droop stop shim (UCAP050) to prevent CV bind<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg MITS041A 2<br />
Medium 40mm 0 - 300kg MITS041B 2<br />
Heavy 40mm 300kg - GVM MITS041C 2<br />
• Must use Ironman 4x4 bushes.<br />
• Unladen manual vehicles with 2 piece tail shaft may experience vibration in first gear.<br />
U-BOLTS<br />
U-Bolt Kit 1102UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715TUK 1<br />
• Not compatible with OEM springs<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
203
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
ML L200<br />
2006 to 2009<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Unladen manual vehicles with 2 piece tail shaft may experience vibration in first gear<br />
MITS041AKG<br />
MITS041AKF<br />
MITS041BKG<br />
MITS041BKF<br />
MITS041BKP<br />
MITS041CKG<br />
MITS041CKF<br />
MITS041CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Strut Shock Absorbers Coil Springs Upper Control Arms (Foam Cell Pro Kits Only)<br />
204 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON MK - 1996-2006<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MITS015C 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12698GRC 2<br />
Nitro Gas - Performance 12698GR 2<br />
Nitro Gas - Professional 12698GRP 2<br />
Foam Cell - Comfort 24698FEC 2<br />
Foam Cell - Performance 24698FE 2<br />
Foam Cell - Professional 24698FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg MITS018B 2<br />
Heavy 40mm 300kg - GVM MITS018C 2<br />
• Must use Ironman 4x4 bushes<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715TUK 1<br />
• Not compatible with OEM springs<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
MK L200<br />
1996 to 2006<br />
MITS015BKG1<br />
MITS015BKF1<br />
MITS015CKG1<br />
MITS015CKF1<br />
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Strut Shock Absorbers<br />
Leaf Springs U-Bolts Brake Hose Relocation Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
205
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
ME-MJ<br />
1993 to 1996<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON ME-MJ - 1993-1996<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12082GR 2<br />
Foam Cell - Performance 24082FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MITS015C 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg MITS018B 2<br />
Heavy 40mm 300kg - GVM MITS018C 2<br />
• Must use Ironman 4x4 bushes<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715TUK 1<br />
• Not compatible with OEM springs<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
MITS015BKG<br />
MITS015BKF<br />
MITS015CKG<br />
MITS015CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
206 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT MITSUBISHI TRITON L200 - PRE 1993<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12082GR 2<br />
Foam Cell - Performance 24082FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars MITS013 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell Suits vehicles w/o power steering 3517 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg MITS018B 2<br />
Heavy 45mm 300kg - GVM MITS018C 2<br />
• Must use Ironman 4x4 bushes<br />
U-BOLTS<br />
U-Bolt Kit 451UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 715UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 795 2<br />
Greasable Pin 796 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
L200<br />
Pre 1993<br />
MITS018BKG1<br />
MITS018BKF1<br />
MITS018CKG1<br />
MITS018CKF1<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
Mitsubishi Triton<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
207
ACCESSORIES TO SUIT<br />
Nissan Navara<br />
NP300<br />
2021+ Series 5<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN NAVARA NP300 SERIES 5 - 2021+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe ∆<br />
BBCD082<br />
Premium - 60.3mm Tube †<br />
BBP082<br />
Proguard No Loop<br />
BBP082-NL<br />
Bull Bar Multi-Function Light Patch Loom to Suit High Spec Headlight<br />
IBBPL082<br />
Bull Bar Multi-Function Light Patch Loom to Suit Low Spec Headlight<br />
IBBPL082L<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL048<br />
* Nissan Australia recommend installation of heavy duty front coil springs when installing a bull bar - Aust Only NISS040C<br />
† Low profile design retains ADAS radar in factory grille<br />
∆<br />
Relocates ADAS radar into bull bar<br />
• Premium bull bar compatible with Ironman 4x4 Lightbar, refer below for available option<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
LIGHTING OPTION - TO SUIT PREMIUM BULL BAR<br />
75W Bright Sabre Single Row Lightbar 524mm (20”) Straight<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps - Dimple Step Design<br />
Side Rails<br />
Side Steps and Rails - Dimple Step Design<br />
Premium Side Steps - 60.3mm Tube - Dimple Step Design<br />
Premium Side Rails - 60.3mm Tube<br />
Premium Side Steps and Rails - 60.3mm Tube - Dimple Step Design<br />
SSR082-D and SS082 RAIL suit BBCD082 Bull bar. SSRP082 and SSP082 RAIL suit BBP082 bull bar<br />
TOWING<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
Towbar Wiring Loom - Plug and Play<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
Wing Kit - 1300mm*<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
Suits wide and narrow body 2.3L twin and single turbo diesel<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Series 5<br />
ILBSR003BW<br />
SS048-D<br />
SS048 RAIL<br />
SSR048-D<br />
SSP082-D<br />
SSP082 RAIL<br />
SSRP082-D<br />
RTB082<br />
ITBL082<br />
IRP005<br />
ITD1300<br />
ISD1300<br />
ITDW048<br />
ISNORKEL048<br />
UBP048S<br />
208 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
NP300<br />
2021+ Series 5<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Navara<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - PINNACLE 2 FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY082-P<br />
Black Star (G42)<br />
ICANOPY082-B<br />
Brilliant Silver (K23)<br />
ICANOPY082-BS<br />
Stealth Grey (KBY)<br />
ICANOPY082-SG<br />
Solid White (QM1)<br />
ICANOPY082-SW<br />
Twilight Grey (K21)<br />
ICANOPY082-TG<br />
White Pearl (QX1)<br />
ICANOPY082-WP<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY082-E<br />
Manual Operation<br />
ISLIDEAWAY082-M<br />
Sports Bar Adaptor<br />
ISLIDEAWAY048-SBA<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform B with Blade Fit Kit (Dual Cab Only) - 1530mm Length*<br />
IFR048PBK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width*<br />
IFR048C2K<br />
Crossbar (x 2) and Fit Kit (Suits ST-X and Pro-4X Dual Cab Only) -1375mm Width<br />
IFRK094<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
*Does not suit models with OE raised rails.<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab)<br />
IFF6082<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT082-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC082-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC082-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD082<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
209
SUSPENSION TO SUIT<br />
Nissan Navara<br />
NP300 (Coil Springs)<br />
2021+ Series 5<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA NP300 SERIES 5 - 2021+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg NISS040A 1<br />
Light 20mm 0 - 50kg NISS040B 1<br />
Medium 35mm 0 - 80kg NISS040C 1<br />
Heavy 40mm 50 - 110kg NISS040D 1<br />
• Series 5 vehicles are produced with a 25mm increased ride height from factory. The resulting lift estimated with Ironman 4x4 suspension will be 25mm less than stated above<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12728GR 2<br />
Foam Cell - Performance 24728FE 2<br />
Foam Cell - Professional 24728FEP 2<br />
Foam Cell Pro - Comfort 45728FEC 2<br />
Foam Cell Pro - Performance 45728FE 2<br />
Foam Cell Pro - Professional 45728FEP 2<br />
• When fitting Foam Cell Pro shock absorbers to the rear of the vehicle, a small modification may be needed on some vehicles to create clearance between the shock body and the lower shock mount gusset on the differential.<br />
Also note the Foam Cell Pro lower eye is offset to assist with clearance.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 20mm 0 - 200kg NISS058A 1<br />
Medium 40mm 0 - 300kg NISS058B 1<br />
Heavy 40mm 300kg - 600kg NISS058C 1<br />
Extra Heavy 45mm 600kg - GVM NISS058D 1<br />
• Series 5 vehicles are produced with a 25mm increased ride height from factory. The resulting lift estimated with Ironman 4x4 suspension will be 25mm less than stated above<br />
COIL SPACER<br />
Polyurethane 20mm NAVR20 2<br />
SPACER KIT<br />
Sway Bar and Headlight Bracket Extension Kit 1204K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS058BKG<br />
Medium - Foam Cell<br />
NISS058BKF<br />
Medium - Foam Cell Pro<br />
NISS058BKP<br />
Heavy - Nitro Gas<br />
NISS058CKG<br />
Heavy - Foam Cell<br />
NISS058CKF<br />
Heavy - Foam Cell Pro<br />
NISS058CKP<br />
Extra Heavy - Nitro Gas<br />
NISS058DKG<br />
Extra Heavy - Foam Cell<br />
NISS058DKF<br />
Extra Heavy - Foam Cell Pro<br />
NISS058DKP<br />
• Specify front Coil Springs when ordering<br />
• Series 5 vehicles are produced with a 25mm increased ride height from factory. The resulting lift estimated with Ironman 4x4 suspension will be 25mm less than stated above<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs Sway Bar and Headlight Bracket Kit<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 408<br />
UPGRADE<br />
210 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
NP300 (Leaf Springs)<br />
2021+ Series 5<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Navara<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA NP300 SERIES 5 - 2021+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg NISS040A 1<br />
Light 20mm 0 - 50kg NISS040B 1<br />
Medium 35mm 0 - 80kg NISS040C 1<br />
Heavy 40mm 50 - 110kg NISS040D 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12698GRC 2<br />
Nitro Gas - Performance 12698GR 2<br />
Foam Cell - Comfort 24698FEC 2<br />
Foam Cell - Performance 24698FE 2<br />
Foam Cell - Professional 24698FEP 2<br />
Foam Cell Pro - Comfort 45698FEC 2<br />
Foam Cell Pro - Performance 45698FE 2<br />
Foam Cell Pro - Professional 45698FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg NISS057B 2<br />
Heavy 40mm 300kg - GVM NISS057C 2<br />
U-BOLTS<br />
U-Bolt Kit 1104UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 704TUK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797-3 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS057BKG<br />
NISS057BKF<br />
NISS057BKP<br />
NISS057CKG<br />
NISS057CKF<br />
NISS057CKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
211
ACCESSORIES TO SUIT<br />
Nissan Navara<br />
NP300<br />
2015 to 2020 Series 1 to 4<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN NAVARA NP300 SERIES 1-4 - 2015-2020<br />
STEEL WINCH BULL BARS - THAI BUILT MODEL ONLY (SUITS WIDE BODY)<br />
Commercial<br />
BBC048<br />
Commercial Deluxe<br />
BBCD048<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR048<br />
Proguard No Loop<br />
BBT048-NL<br />
Proguard Single Loop Kit<br />
BB048-SL<br />
Proguard Triple Loop Kit<br />
BB048-TL<br />
Driving Light / Lightbar Patch Loom<br />
IPLS048<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL048<br />
* Nissan Australia recommend installation of heavy duty front coil springs when installing a bull bar - Aust Only NISS040C<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps - Dimple Step Design<br />
SS048-D<br />
Side Rails<br />
SS048 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR048-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB048<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB048<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE048<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL048<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP005<br />
LOCKSAFE DRAWER SYSTEMS - FITS DUAL AND EXTRA CAB<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW048<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
Suits wide and narrow body 2.3L twin and single turbo diesel<br />
ISNORKEL048<br />
LONG RANGE FUEL TANK<br />
140L* - Auto/Coil Spring Diesel only. Not compatible with AdBlue equipped models TANK048<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Series 1<br />
UBP048<br />
Engine Bay and Transmission - Series 2, 3 and 4<br />
UBP048S<br />
212 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
NP300<br />
2015 to 2020 Series 1 to 4<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Navara<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
White (QM1)<br />
CANOPY013-PW<br />
Cosmic Black (G42)<br />
CANOPY013-CB<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
White (QM1)<br />
CANFIBRE048-PW<br />
Brilliant Silver (K23)<br />
CANFIBRE048-BS<br />
White Diamond (QX1)<br />
CANFIBRE048-WP<br />
Slate Grey (K21)<br />
CANFIBRE048-SG<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY048-E<br />
Sports Bar Adaptor<br />
ISLIDEAWAY048-SBA<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform B with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR048PBK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
IFR048C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
*Does not suit models with OE raised rails.<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab)<br />
IFF6048<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
213
SUSPENSION TO SUIT<br />
Nissan Navara<br />
NP300 (Coil Springs)<br />
2015 to 2020 Series 1 to 4<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA NP300 SERIES 1-4 - 2015-2020<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg NISS040A 1<br />
Light 20mm 0 - 50kg NISS040B 1<br />
Medium 35mm 0 - 80kg NISS040C 1<br />
Heavy 40mm 50 - 110kg NISS040D 1<br />
• Series 5 vehicles are produced with a 25mm increased ride height from factory. The resulting lift estimated with Ironman 4x4 suspension will be 25mm less than stated above<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12728GR 2<br />
Foam Cell - Performance 24728FE 2<br />
Foam Cell - Professional 24728FEP 2<br />
Foam Cell Pro - Comfort 45728FEC 2<br />
Foam Cell Pro - Performance 45728FE 2<br />
Foam Cell Pro - Professional 45728FEP 2<br />
• When fitting Foam Cell Pro shock absorbers to the rear of the vehicle, a small modification may be needed on some vehicles to create clearance between the shock body and the lower shock mount gusset on the differential.<br />
Also note the Foam Cell Pro lower eye is offset to assist with clearance.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 20mm 0 - 200kg NISS058A 1<br />
Medium 40mm 0 - 300kg NISS058B 1<br />
Heavy 40mm 300kg - 600kg NISS058C 1<br />
Extra Heavy 45mm 600kg - GVM NISS058D 1<br />
• Series 5 vehicles are produced with a 25mm increased ride height from factory. The resulting lift estimated with Ironman 4x4 suspension will be 25mm less than stated above<br />
COIL SPACER<br />
Polyurethane 20mm NAVR20 2<br />
SPACER KIT<br />
Sway Bar and Headlight Bracket Extension Kit 1204K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS058BKG<br />
Medium - Foam Cell<br />
NISS058BKF<br />
Medium - Foam Cell Pro<br />
NISS058BKP<br />
Heavy - Nitro Gas<br />
NISS058CKG<br />
Heavy - Foam Cell<br />
NISS058CKF<br />
Heavy - Foam Cell Pro<br />
NISS058CKP<br />
Extra Heavy - Nitro Gas<br />
NISS058DKG<br />
Extra Heavy - Foam Cell<br />
NISS058DKF<br />
Extra Heavy - Foam Cell Pro<br />
NISS058DKP<br />
• Specify front Coil Springs when ordering<br />
• Series 5 vehicles are produced with a 25mm increased ride height from factory. The resulting lift estimated with Ironman 4x4 suspension will be 25mm less than stated above<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Sway Bar and Headlight Bracket Kit<br />
214 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
NP300 (Leaf Springs)<br />
2015 to 2020 Series 1 to 4<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Navara<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA NP300 SERIES 1-4 - 2015-2020<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg NISS040A 1<br />
Light 20mm 0 - 50kg NISS040B 1<br />
Medium 35mm 0 - 80kg NISS040C 1<br />
Heavy 40mm 50 - 110kg NISS040D 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12698GRC 2<br />
Nitro Gas - Performance 12698GR 2<br />
Foam Cell - Comfort 24698FEC 2<br />
Foam Cell - Performance 24698FE 2<br />
Foam Cell - Professional 24698FEP 2<br />
Foam Cell Pro - Comfort 45698FEC 2<br />
Foam Cell Pro - Performance 45698FE 2<br />
Foam Cell Pro - Professional 45698FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg NISS057B 2<br />
Heavy 40mm 300kg - GVM NISS057C 2<br />
U-BOLTS<br />
U-Bolt Kit 1104UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 704TUK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797-3 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS057BKG<br />
NISS057BKF<br />
NISS057BKP<br />
NISS057CKG<br />
NISS057CKF<br />
NISS057CKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
215
Product Description Part No. Qty<br />
Req<br />
Be ready for every occasion!
ACCESSORIES TO SUIT<br />
D40<br />
2005+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN NAVARA D40 - 2005+<br />
STEEL WINCH BULL BARS - RECESSED LINE IN OE BUMPER BAR AND THAI BUILT VEHICLES WITH SMOOTH BUMPER<br />
Commercial Deluxe<br />
BBCD012<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL WINCH BULL BARS - SMOOTH OE BUMPER BAR EXCEPT THAI BUILT VEHICLES<br />
Commercial Deluxe<br />
BBCD042<br />
• Can also be fitted to both 2WD and 4WD models.<br />
• STX Spain Built 2010+. - Fits 440(4Cyl) and 550 (V6) Smooth Bumper<br />
STEEL SIDE STEPS AND RAILS - THAI BUILT DUAL CAB MODEL<br />
Side Steps<br />
SS007<br />
Side Steps and Rails<br />
SSR003<br />
STEEL SIDE STEPS AND RAILS - SPAIN BUILT 2010+ DUAL CAB MODEL<br />
Side Steps<br />
SS042<br />
Side Steps and Rails<br />
SSR042<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP005<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm (ST 2010+)*<br />
ITDW028<br />
Wing Kit - 1300mm (STX, 2006+ Spain built)*<br />
ITDW029<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
D40 Navara 2005+ - Not including RX models<br />
ISNORKEL019<br />
• Not compatible with RX models.<br />
LONG RANGE FUEL TANK<br />
Spain Built 145L* Dual Cab - Diesel only<br />
TANK003<br />
Thai Built 145L* Dual Cab - Diesel only (includes adaptor kit)<br />
TANK003T<br />
* Usable volume may differ to the stated tank capacity<br />
UNDERBODY PROTECTION<br />
Engine Bay, Radiator* and Transmission - While Stocks Last<br />
IUP007K<br />
* IMPORTANT - Radiator plate ONLY suitable for Spain Built Vehicle. Does not fit vehicles with bull bar fitted.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
Nissan Navara<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
217
SUSPENSION TO SUIT<br />
Nissan Navara<br />
D40 (V6 Diesel)<br />
2005+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA D40 - 2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS040C 1<br />
Heavy 35mm 50 - 110kg NISS040D 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12717GR 2<br />
Foam Cell - Performance 24717FE 2<br />
Foam Cell - Professional 24717FEP 2<br />
Foam Cell Pro - Performance 45717FE 2<br />
Foam Cell Pro - Professional 45717FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg NISS041B 2<br />
Heavy 40mm 300 - 500kg NISS041C 2<br />
Extra Heavy 40mm 500kg - GVM NISS041D 2<br />
U-BOLTS<br />
U-Bolt Kit Suits NISS041B and NISS041C 437UBK 2<br />
U-Bolt Kit Extra Long Suits NISS041D 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 769UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797-1 2<br />
AXLE PROTECTION<br />
ABS Wire and Axle Shield IAP001 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS041BKG1<br />
NISS041BKF1<br />
NISS041BKP1<br />
NISS041CKG1<br />
NISS041CKF1<br />
NISS041CKP1<br />
NISS041DKG1<br />
NISS041DKF1<br />
NISS041DKP1<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
218 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
D40 (4cyl Diesel and V6 Petrol)<br />
2005+<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Navara<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA D40 - 2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS040B 1<br />
Heavy 35mm 50 - 110kg NISS040C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12717GR 2<br />
Foam Cell - Performance 24717FE 2<br />
Foam Cell - Professional 24717FEP 2<br />
Foam Cell Pro - Performance 45717FE 2<br />
Foam Cell Pro - Professional 45717FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 300kg NISS041B 2<br />
Heavy 40mm 300 - 500kg NISS041C 2<br />
Extra Heavy 40mm 500kg - GVM NISS041D 2<br />
U-BOLTS<br />
U-Bolt Kit Suits NISS041B and NISS041C 437UBK 2<br />
U-Bolt Kit Extra Long Suits NISS041D 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 769UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797-1 2<br />
AXLE PROTECTION<br />
ABS Wire and Axle Shield IAP001 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS041BKG<br />
NISS041BKF<br />
NISS041BKP<br />
NISS041CKG<br />
NISS041CKF<br />
NISS041CKP<br />
NISS041DKG<br />
NISS041DKF<br />
NISS041DKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
219
ACCESSORIES TO SUIT<br />
Nissan Navara<br />
D22<br />
2002+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN NAVARA D22 - 2002+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Can also be fitted to both 2WD and 4WD models.<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawer - 1300mm<br />
Single Drawer - 1300mm<br />
Wing Kit - 1300mm (2002 to 2007)*<br />
Wing Kit - 1300mm (2007+)*<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD013<br />
ITD1300<br />
ISD1300<br />
ITDW025<br />
ITDW026<br />
IDIFFBRE<br />
220 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
D22 / NP300 (Torsion Bar)<br />
1997+<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Navara<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA D22 - 1997+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12791GR 2<br />
• Upper control arm may contact shock absorber, grind away material on control arm for clearance<br />
TORSION BAR<br />
Uprated Torsion Bars NISS025 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
LEAF SPRINGS EST. LIFT ADDITIONAL LOAD<br />
Light - Drivers Side 40mm 0 - 100kg NISS014AD/S 1<br />
Light - Near Side 40mm 0 - 100kg NISS014AN/S 1<br />
Medium - Drivers Side 40mm 0 - 250kg NISS014BD/S 1<br />
Medium - Near Side 40mm 0 - 250kg NISS014BN/S 1<br />
Heavy - Drivers Side 40mm 250kg - GVM NISS014CD/S 1<br />
Heavy - Near Side 40mm 250kg - GVM NISS014CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 788UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 704UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797 2<br />
Greasable Pin 798 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
NISS025AKG<br />
NISS025BKG<br />
NISS025CKG<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
221
SUSPENSION TO SUIT<br />
Nissan Navara<br />
D21<br />
1985 to 1996<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN NAVARA D21 - 1985-1996<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12087GR 2<br />
Foam Cell - Performance 24087FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars NISS013 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS EST. LIFT ADDITIONAL LOAD<br />
Light - Drivers Side 40mm 0 - 100kg NISS014AD/S 1<br />
Light - Near Side 40mm 0 - 100kg NISS014AN/S 1<br />
Medium - Drivers Side 40mm 0 - 250kg NISS014BD/S 1<br />
Medium - Near Side 40mm 0 - 250kg NISS014BN/S 1<br />
Heavy - Drivers Side 40mm 250kg - GVM NISS014CD/S 1<br />
Heavy - Near Side 40mm 250kg - GVM NISS014CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 788UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 704UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797 2<br />
Greasable Pin 798 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
NISS014AKG<br />
NISS014AKF<br />
NISS014BKG<br />
NISS014BKF<br />
NISS014CKG<br />
NISS014CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
222 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Pre 2005<br />
Nissan Paladin<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PALADIN - PRE 2005<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12791GR 2<br />
TORSION BAR<br />
Uprated Torsion Bars NISS048 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12698GRC 2<br />
Nitro Gas - Performance 12698GR 2<br />
Foam Cell - Comfort 24698FEC 2<br />
Foam Cell - Performance 24698FE 2<br />
Foam Cell - Professional 24698FEP 2<br />
LEAF SPRINGS EST. LIFT ADDITIONAL LOAD<br />
Medium 40mm 0 - 250kg NISS049B 2<br />
U-BOLTS<br />
U-Bolt Kit 654UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 769UKL 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797-2 2<br />
Greasable Pin 798 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
NISS049BKG<br />
Shock Absorbers Shackles Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
223
ACCESSORIES TO SUIT<br />
Nissan Pathfinder<br />
R51<br />
2005 to 2013<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN PATHFINDER R51 - 2005-2013<br />
STEEL WINCH BULL BARS - RECESSED LINE IN OE BUMPER BAR AND THAI VEHICLES WITH SMOOTH BUMPER<br />
Commercial Deluxe<br />
BBCD012<br />
STEEL WINCH BULL BARS - SMOOTH OE BUMPER BAR EXCEPT THAI BUILT VEHICLES<br />
Commercial Deluxe<br />
BBCD042<br />
• STX Spain Built 2010+ - Fits 2012 V6 model only<br />
SNORKEL<br />
R51 Pathfinder<br />
ISNORKEL019<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
224 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
R51 (V6 Diesel)<br />
7/2005+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATHFINDER R51 - 7/2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS040C 1<br />
Heavy 35mm 50 - 110kg NISS040D 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12718GR 2<br />
Foam Cell - Performance 24718FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 250kg NISS042B 1<br />
Heavy 40mm 250kg - GVM NISS042C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
NISS042BKG1<br />
NISS042BKF1<br />
NISS042CKG1<br />
NISS042CKF1<br />
SUSPENSION TO SUIT<br />
Nissan Pathfinder<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
225
Product Description Part No. Qty<br />
Req<br />
On the road again
R51 (4cyl Diesel and V6 Petrol)<br />
7/2005+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATHFINDER R51 - 7/2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS040B 1<br />
Heavy 35mm 50 - 110kg NISS040C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12718GR 2<br />
Foam Cell - Performance 24718FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 250kg NISS042B 1<br />
Heavy 40mm 250kg - GVM NISS042C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS042BKG<br />
Medium - Foam Cell<br />
NISS042BKF<br />
Heavy - Nitro Gas<br />
NISS042CKG<br />
Heavy - Foam Cell<br />
NISS042CKF<br />
• Mandatory 4 wheel alignment after installing new suspension<br />
SUSPENSION TO SUIT<br />
Nissan Pathfinder<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
227
SUSPENSION TO SUIT<br />
Nissan Pathfinder<br />
R50<br />
1995 to 7/2005<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATHFINDER R50 - 1995-7/2005<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS034B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER14 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 200kg NISS035B 1<br />
228 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
R20 / WD21<br />
Pre 1995<br />
SUSPENSION TO SUIT<br />
Nissan<br />
Pathfinder / Terrano / II<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATHFINDER R50 / TERRANO / II - PRE 1995<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars NISS017 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 -250kg NISS018B 1<br />
Heavy 40mm 250kg - GVM HOLD008B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Torsion Bars<br />
NISS018BKG<br />
NISS018BKF<br />
NISS018CKG<br />
NISS018CKF<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
229
ACCESSORIES TO SUIT<br />
Nissan Patrol<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
Y62<br />
2010 to 2019 Series 2 to 3<br />
2020+ Series 5<br />
ACCESSORIES TO SUIT NISSAN PATROL Y62 - 2010+<br />
STEEL WINCH BULL BARS<br />
Premium Commercial Deluxe - 60.3mm Tube - (2010 to 2019)*<br />
BBP062<br />
Premium Commercial Deluxe - 60.3mm Tube - (2020+)<br />
BBP084<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR084<br />
Bull Bar Multi-Function Light Patch Loom<br />
IPLS084<br />
Driving Light / Lightbar Patch Loom<br />
IBBPL084<br />
Driving Light / Lightbar Patch Loom - Factory LED Headlight models only - While Stocks Last<br />
IPL084<br />
* Does not suit vehicles with Adaptive Cruise Control.<br />
• Winch with Steel Cable and Roller Fairlead is not suitable with BBP084 or BBR084 - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Premium Side Steps - 60.3mm Tube - (2020+)<br />
SSP084<br />
Premium Side Rails - 60.3mm Tube - (2020+)<br />
SSP084 RAIL<br />
Premium Side Steps and Rails - 60.3mm Tube - (2020+)<br />
SSRP084<br />
ATLAS ROOF RACK KIT<br />
Platform N with Blade Fit Kit - 2130mm Length<br />
IFR062LPNK<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
230 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Y62<br />
2010+<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Patrol<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y62 - 2010+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12740GR 2<br />
Foam Cell Strut - Performance 24740FE 2<br />
Foam Cell Pro Strut - Performance 45740FE 2<br />
• Non HBMC models only<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 50kg NISS045A 1<br />
Medium 40mm 0 - 50kg NISS045B 1<br />
Heavy 50mm 50 - 110kg NISS045C 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
SWAY BAR<br />
36mm Sway Bar ISB600F 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12742GR 2<br />
Foam Cell - Performance 24742FE 2<br />
Foam Cell Pro - Performance 45742FE 2<br />
• Non HBMC models only<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 -300kg NISS046A 1<br />
Medium 40mm 0 -300kg NISS046B 1<br />
Heavy 50mm 300kg - GVM NISS046C 1<br />
SWAY BAR<br />
27mm Sway Bar ISB600R 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Non HBMC models only<br />
• Mandatory 4 wheel alignment after installing new suspension<br />
NISS045AKG<br />
NISS045AKF<br />
NISS045AKP<br />
NISS045BKG<br />
NISS045BKF<br />
NISS045BKP<br />
NISS045CKG<br />
NISS045CKF<br />
NISS045CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Strut Shock Absorbers<br />
Leaf Springs<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
231
ACCESSORIES TO SUIT<br />
Nissan Patrol<br />
Y61 GU Series 4<br />
2005+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN PATROL Y61 - 2005+<br />
STEEL WINCH BULL BARS<br />
Premium - 60.3mm Tube<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
Side Steps and Rails<br />
Premium Side Steps and Rails - 60.3mm Tube<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm (DX, ST, STI)<br />
Wing Kit - 1000mm (STL, Di)<br />
SNORKEL<br />
GU Patrol Series 4<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 100mm (8 Feet)<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBP011<br />
SS012<br />
SSR012<br />
SSRP011<br />
IRP005<br />
ITD1000<br />
ISD1000<br />
ITDW011<br />
ITDW012<br />
ISNORKEL013<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET100<br />
IRRFEET125<br />
IDIFFBRE<br />
232 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
Y61 GU Series 1-3<br />
1998 to 2004<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN PATROL Y61 - 1998-2004<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe (Coil Spring Only)<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
Side Steps and Rails<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
• Series 3-5 only.<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm (DX, ST, STI)*<br />
Wing Kit - 1000mm (STL, Di)<br />
SNORKEL<br />
GU Patrol Series 1 2 and 3<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 100mm (8 Feet)<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD009<br />
SS012<br />
SSR012<br />
IRP005<br />
ITD1000<br />
ISD1000<br />
ITDW011<br />
ITDW012<br />
ISNORKEL015<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET100<br />
IRRFEET125<br />
IDIFFBRE<br />
Nissan Patrol<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
233
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
Y61 GU LWB Wagon<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y61<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell - Professional 24091FEP 2<br />
Foam Cell - Performance Suits 4” Lift 24091LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24091LFE1 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45091LFE 2<br />
Foam Cell Pro - Professional Suits 4” Lift 45091LFEP 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45091LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg NISS024B 1<br />
Medium - 4” Lift 100mm 0 - 100kg NISS026B 1<br />
Medium - 6” Lift 150mm 0 - 100kg NISS043B 1<br />
Heavy 50mm 50 - 110kg NISS009C 1<br />
STEERING DAMPER<br />
Foam Cell Pre 2/2000 3511 1<br />
Foam Cell 2/2000+ 3501 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE003 1<br />
Radius Arm Spacer 15mm 833WT 1<br />
4º Drop Box DBOX003 1<br />
STEERING RODS<br />
Adjustable Drag Link ADL005 1<br />
Track Rod ATR005 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod Pre 2/2000 PANHARD003 1<br />
Left Hand Drive Rod Pre 2/2000 PANHARD008 1<br />
Right Hand Drive Rod 2/2000+ PANHARD005 1<br />
Left Hand Drive Rod 2/2000+ PANHARD009 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
Extended Sway Bar Link Suits 4-7”Lift SBEXT003 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATF15 2<br />
Polyurethane 30mm Provides 25mm Lift PATF30 2<br />
BRAKE HOSE<br />
Extended Brake Hose Non ABS Models BHOSE003 1<br />
Extended Brake Hose ABS models BHOSE005 2<br />
234 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Y61 GU LWB Wagon<br />
Nissan Patrol<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Performance Suits 4” Lift 24094LFE 2<br />
Foam Cell - Professional Suits 4” Lift 24094LFEP 2<br />
Foam Cell - Performance Suits 6” Lift 24094LFE1 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45094LFE 2<br />
Foam Cell Pro - Professional Suits 4” Lift 45094LFEP 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45094LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 200kg NISS010C 1<br />
Medium - 4” Lift 100mm 0 - 300kg NISS027B 1<br />
Medium - 6” Lift 150mm 0 - 300kg NISS044B 1<br />
Heavy 50mm 200 - 400kg NISS020C 1<br />
Heavy - 4”Lift 100mm 400kg - GVM NISS027C 1<br />
Heavy - 6”Lift 150mm 400kg - GVM NISS044C 1<br />
Extra Heavy 50mm 400kg - GVM NISS020D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod Pre 2/2000 PANHARD004 1<br />
Adjustable Panhard Rod 2/2000+ PANHARD006 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA003 2<br />
Lower Trailing Arm LTA003 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift Right Side SBEXT006 1<br />
Extended Sway Bar Link Suits 4-7”Lift Right Side SBEXT003 1<br />
Extended Sway Bar Link Suits 1-3”Lift Left Side SBEXT007 1<br />
Extended Sway Bar Link Suits 4-7”Lift Left Side SBEXT004 1<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATR15 2<br />
Polyurethane 30mm Provides 25mm Lift PATR30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE004 1<br />
BRACKET KIT<br />
Coil Drop Out Cone IDOC003 1<br />
Coil Retainer Kit ICR003 1<br />
BUSH KIT<br />
Rubber Suspension Arm Bush Kit - Pre 2/2000 W/ Standard Radius Arm Bushes 839RK 1<br />
Rubber Suspension Arm Bush Kit - Pre 2/2000 W/ Offset Radius Arm Bushes 839CRK 1<br />
Rubber Suspension Arm Bush Kit - 2/2000+ W/ Standard Radius Arm Bushes 848RK 1<br />
Rubber Suspension Arm Bush Kit - 2/2000+ W/ Offset Radius Arm Bushes 848CRK 1<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
235
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
Y61 GU LWB Wagon<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS024CKG<br />
Medium - Foam Cell<br />
NISS024CKF<br />
Medium - Foam Cell 4”Lift RHD - Pre 2/2000 NISS026BKF<br />
Medium - Foam Cell 4”Lift LHD - Pre 2/2000 NISS026BKFL<br />
Medium - Foam Cell 6”Lift RHD - Pre 2/2000 NISS043BKF<br />
Medium - Foam Cell 6”Lift LHD - Pre 2/2000 NISS043BKFL<br />
Medium - Foam Cell 4”Lift RHD - 2/2000+ NISS026BKF1<br />
Medium - Foam Cell 4”Lift LHD - 2/2000+ NISS026BKF1L<br />
Medium - Foam Cell 6”Lift RHD - 2/2000+ NISS043BKF1<br />
Medium - Foam Cell 6”Lift LHD - 2/2000+ NISS043BKF1L<br />
Medium - Foam Cell Pro<br />
NISS024CKP<br />
Medium - Foam Cell Pro 4”Lift RHD - Pre 2/2000 NISS026BKP<br />
Medium - Foam Cell Pro 4”Lift LHD - Pre 2/2000 NISS026BKPL<br />
Medium - Foam Cell Pro 6”Lift RHD - Pre 2/2000 NISS043BKP<br />
Medium - Foam Cell Pro 6”Lift LHD - Pre 2/2000 NISS043BKPL<br />
Medium - Foam Cell Pro 4”Lift RHD - 2/2000+ NISS026BKP1<br />
Medium - Foam Cell Pro 4”Lift LHD - 2/2000+ NISS026BKP1L<br />
Medium - Foam Cell Pro 6”Lift RHD - 2/2000+ NISS043BKP1<br />
Medium - Foam Cell Pro 6”Lift LHD - 2/2000+ NISS043BKP1L<br />
Heavy - Nitro Gas<br />
NISS037CKG<br />
Heavy - Foam Cell<br />
NISS037CKF<br />
Heavy - Foam Cell 4”Lift RHD - Pre 2/2000 NISS026CKF<br />
Heavy - Foam Cell 6”Lift RHD - Pre 2/2000 NISS043CKF<br />
Heavy - Foam Cell 4”Lift RHD - 2/2000+ NISS026CKF1<br />
Heavy- Foam Cell 6”Lift RHD - 2/2000+ NISS043CKF1<br />
Heavy - Foam Cell Pro<br />
NISS037CKP<br />
Heavy - Foam Cell Pro 4”Lift RHD - Pre 2/2000 NISS026CKP<br />
Heavy- Foam Cell Pro 6”Lift RHD - Pre 2/2000 NISS043CKP<br />
Heavy - Foam Cell Pro 4”Lift RHD - 2/2000+ NISS026CKP1<br />
Heavy- Foam Cell Pro 6”Lift RHD - 2/2000+ NISS043CKP1<br />
Extra Heavy - Nitro Gas<br />
NISS037DKG<br />
Extra Heavy - Foam Cell<br />
NISS037DKF<br />
Extra Heavy - Foam Cell Pro<br />
NISS037DKP<br />
• Specify ABS / non-ABS brake hoses when ordering suspension kits<br />
• 4” and 6” lifts may not be legal for on-road use in your area, certification may be required for on-road use<br />
• Due to the extreme nature of 4” and 6” lifts, further modifications may be required, and will vary between vehicles, such modifications are entirely the owners responsibility<br />
Ironman 4x4 accept no responsibility for any damage or injury caused by use of the these products<br />
50MM SUSPENSION KIT CONTENTS<br />
4” AND 6” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers Caster Plates<br />
Coil Springs<br />
Brake Hoses<br />
Panhard Rods<br />
Adjustable Trailing Arms<br />
Sway Bar Links<br />
236 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Y60 GQ / Y61 GU<br />
Cab Chassis (Coil/Coil)<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y60 / Y61 - COIL/COIL<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell - Professional 24091FEP 2<br />
Foam Cell - Performance Suits 4” Lift 24091LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24091LFE1 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45091LFE 2<br />
Foam Cell Pro - Professional Suits 4” Lift 45091LFEP 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45091LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg NISS024B 1<br />
Heavy 50mm 50 - 110kg NISS009C 1<br />
Medium - 4” Lift 100mm 0 - 100kg NISS026B 1<br />
Medium - 6” Lift 150mm 0 - 100kg NISS043B 1<br />
STEERING DAMPER<br />
Foam Cell 3511 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE003 1<br />
Radius Arm Spacer 15mm 833WT 1<br />
4º Drop Box DBOX003 1<br />
STEERING RODS<br />
Adjustable Drag Link ADL003 1<br />
Track Rod ATR003 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod PANHARD003 1<br />
Left Hand Drive Rod PANHARD008 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
Extended Sway Bar Link Suits 4-7”Lift SBEXT003 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATF15 2<br />
Polyurethane 30mm Provides 25mm Lift PATF30 2<br />
BRAKE HOSE<br />
Extended Brake Hose Non ABS Models BHOSE003 1<br />
Extended Brake Hose ABS models BHOSE005 2<br />
Nissan Patrol<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
237
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
Y60 GQ / Y61 GU<br />
Cab Chassis (Coil/Coil)<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Performance Suits 4” Lift 24094LFE 2<br />
Foam Cell - Professional Suits 4” Lift 24094LFEP 2<br />
Foam Cell - Performance Suits 6” Lift 24094LFE1 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45094LFE 2<br />
Foam Cell Pro - Professional Suits 4” Lift 45094LFEP 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45094LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 300kg NISS020B 1<br />
Medium - 4” Lift 100mm 0 - 300kg NISS027B 1<br />
Medium - 6” Lift 150mm 0 - 300kg NISS044B 1<br />
Heavy 50mm 300 - 400kg NISS020C 1<br />
Heavy - 4”Lift 100mm 400kg - GVM NISS027C 1<br />
Heavy - 6”Lift 150mm 400kg - GVM NISS044C 1<br />
Extra Heavy 50mm 400kg - GVM NISS020D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD004 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA003 2<br />
Lower Trailing Arm LTA003 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift Right Side SBEXT006 1<br />
Extended Sway Bar Link Suits 4-7”Lift Right Side SBEXT003 1<br />
Extended Sway Bar Link Suits 1-3”Lift Left SIde SBEXT007 1<br />
Extended Sway Bar Link Suits 4-7”Lift Left Side SBEXT004 1<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATR15 2<br />
Polyurethane 30mm Provides 25mm Lift PATR30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE004 1<br />
BRACKET KIT<br />
Coil Drop Out Cone IDOC003 1<br />
Coil Retainer Kit ICR003 1<br />
BUSH KIT<br />
Rubber Suspension Arm Bush Kit W/ Standard Radius Arm Bushes 839RK 1<br />
Rubber Suspension Arm Bush Kit W/ Offset Radius Arm Bushes 839CRK 1<br />
238 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Y60 GQ / Y61 GU<br />
Cab Chassis (Coil/Coil)<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Patrol<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS037BKG<br />
Medium - Foam Cell<br />
NISS037BKF<br />
Medium - Foam Cell 4”Lift RHD NISS026BKF<br />
Medium - Foam Cell 4”Lift LHD NISS026BKFL<br />
Medium - Foam Cell 6”Lift RHD NISS043BKF<br />
Medium - Foam Cell 6”Lift LHD NISS043BKFL<br />
Medium - Foam Cell Pro<br />
NISS037BKP<br />
Medium - Foam Cell Pro 4”Lift RHD NISS026BKP<br />
Medium - Foam Cell Pro 4”Lift LHD NISS026BKPL<br />
Medium - Foam Cell Pro 6”Lift RHD NISS043BKP<br />
Medium - Foam Cell Pro 6”Lift LHD NISS043BKPL<br />
Heavy - Nitro Gas<br />
NISS037CKG<br />
Heavy - Foam Cell<br />
NISS037CKF<br />
Heavy - Foam Cell 4”Lift RHD NISS026CKF<br />
Heavy - Foam Cell 4”Lift LHD NISS026CKFL<br />
Heavy - Foam Cell 6”Lift RHD NISS043CKF<br />
Heavy - Foam Cell 6”Lift LHD NISS043CKFL<br />
Heavy - Foam Cell Pro<br />
NISS037CKP<br />
Heavy - Foam Cell Pro 4”Lift RHD NISS026CKP<br />
Heavy - Foam Cell Pro 4”Lift LHD NISS026CKPL<br />
Heavy - Foam Cell Pro 6”Lift RHD NISS043CKP<br />
Heavy - Foam Cell Pro 6”Lift LHD NISS043CKPL<br />
Extra Heavy - Nitro Gas<br />
NISS037DKG<br />
Extra Heavy - Foam Cell<br />
NISS037DKF<br />
Extra Heavy - Foam Cell Pro<br />
NISS037DKP<br />
• Specify ABS / non-ABS brake hoses when ordering suspension kits<br />
• 4” and 6” lifts may not be legal for on-road use in your area, certification may be required for on-road use<br />
• Due to the extreme nature of 4” and 6” lifts, further modifications may be required, and will vary between vehicles<br />
Such modifications are entirely the owners responsibility. Ironman 4x4 accept no responsibility for any damage or injury caused by use of the these products<br />
50MM SUSPENSION KIT CONTENTS<br />
4” AND 6” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers Caster Plates<br />
Coil Springs<br />
Brake Hoses<br />
Panhard Rods<br />
Adjustable Trailing Arms<br />
Sway Bar Links<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
239
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
Y60 GQ / Y61 GU<br />
Cab Chassis (Coil/Leaf)<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y60 / Y61 - COIL/LEAF<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg NISS024B 1<br />
Heavy 50mm 50 - 110kg NISS009C 1<br />
STEERING DAMPER<br />
Foam Cell 3511 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE003 1<br />
Radius Arm Spacer 15mm 833WT 1<br />
4º Drop Box DBOX003 1<br />
CROSSMEMBER SPACER<br />
6mm / 12mm Spacer Kit 1002K 1<br />
STEERING RODS<br />
Adjustable Drag Link ADL003 1<br />
Track Rod ATR003 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod PANHARD003 1<br />
Left Hand Drive Rod PANHARD008 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATF15 2<br />
Polyurethane 30mm Provides 25mm Lift PATF30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE003 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12648GR 2<br />
Foam Cell - Performance 24648FE 2<br />
Foam Cell Pro - Performance 45648FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Heavy - Drivers Side 50mm 0 - 400kg NISS012CD/S 1<br />
Heavy - Near Side 50mm 0 - 400kg NISS012CN/S 1<br />
Extra Heavy - Drivers Side 50mm 400kg - GVM NISS012DD/S 1<br />
Extra Heavy - Near Side 50mm 400kg - GVM NISS012DN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 1100UBK 2<br />
U-Bolt Kit Suits NISS012D 1100UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 667 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS036CKG<br />
NISS036CKF<br />
NISS036CKP<br />
NISS036DKG<br />
NISS036DKF<br />
NISS036DKP<br />
Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Coil Springs<br />
U-Bolts<br />
240 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
Y60 GQ Station Wagon and Coil Cab<br />
1987 to 1997<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Patrol<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT NISSAN PATROL Y60 - 1987-1997<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
SNORKEL<br />
All Models Except 2.8L Diesel<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 125mm (8 Feet - Does not fit high roof model)<br />
Gutter Mount Feet - 210mm (8 Feet - Fits high roof model)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD010<br />
ITD1000<br />
ISD1000<br />
ISNORKEL011<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET125<br />
IRRFEET210<br />
IDIFFBRE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
241
ACCESSORIES TO SUIT<br />
Nissan Patrol<br />
Y60 GQ Cab Chassis (Leaf/Leaf)<br />
1988+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y60 - 1988+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12661GR 2<br />
Foam Cell - Performance 24661FE 2<br />
Foam Cell Pro - Performance 45661FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Heavy - Drivers Side 50mm 0 - 110kg NISS011CD/S 1<br />
Heavy - Near Side 50mm 0 - 110kg NISS011CN/S 1<br />
STEERING DAMPER<br />
Foam Cell 3522 1<br />
U-BOLTS<br />
Drivers Side U-Bolt Kit 669UBK 1<br />
Near Side U-Bolt Kit 436UBK 1<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 718UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353RH 1<br />
Greasable Shackle Right Hand Side 353LH 1<br />
Greasable Pin 667 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12648GR 2<br />
Foam Cell - Performance 24648FE 2<br />
Foam Cell Pro - Performance 45648FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Heavy - Drivers Side 50mm 0 - 400kg NISS012CD/S 1<br />
Heavy - Near Side 50mm 0 - 400kg NISS012CN/S 1<br />
Extra Heavy - Drivers Side 50mm 400kg - GVM NISS012DD/S 1<br />
Extra Heavy - Near Side 50mm 400kg - GVM NISS012DN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 670UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 667 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS011CKG<br />
NISS011CKF<br />
NISS011CKP<br />
NISS011DKG<br />
NISS011DKF<br />
NISS011DKP<br />
Shock Absorbers<br />
Leaf Springs<br />
U-Bolts<br />
Polyurethane Spring Bushes<br />
242 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Y60 GQ LWB Wagon<br />
1988 to 1998<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y60 - 1988-1998<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell - Professional 24091FEP 2<br />
Foam Cell - Performance Suits 4” Lift 24091LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24091LFE1 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45091LFE 2<br />
Foam Cell Pro - Professional Suits 4” Lift 45091LFEP 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45091LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg NISS009B 1<br />
Heavy 50mm 50 - 110kg NISS009C 1<br />
Medium - 4” Lift 100mm 0 - 100kg NISS026B 1<br />
Medium - 6” Lift 150mm 0 - 100kg NISS043B 1<br />
STEERING DAMPER<br />
Foam Cell Pre 8/1989 3534 1<br />
Foam Cell 8/1989+ 3536 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE003 1<br />
Radius Arm Spacer 15mm 833WT 1<br />
4º Drop Box DBOX003 1<br />
CROSSMEMBER SPACER<br />
6mm / 12mm Spacer Kit 1002K 1<br />
STEERING RODS<br />
Adjustable Drag Link ADL003 1<br />
Track Rod ATR003 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod PANHARD003 1<br />
Left Hand Drive Rod PANHARD008 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
Extended Sway Bar Link Suits 4-7”Lift SBEXT003 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATF15 2<br />
Polyurethane 30mm Provides 25mm Lift PATF30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE003 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Performance Suits 4” Lift 24094LFE 2<br />
Foam Cell - Professional Suits 4” Lift 24094LFEP 2<br />
Foam Cell - Performance Suits 6” Lift 24094LFE1 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45094LFE 2<br />
Foam Cell Pro - Professional Suits 4” Lift 45094LFEP 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45094LFE1 2<br />
Nissan Patrol<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
243
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
Y60 GQ LWB Wagon<br />
1988 to 1998<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -200kg NISS010B 1<br />
Medium - 4” Lift 100mm 0 - 300kg NISS027B 1<br />
Medium - 6” Lift 150mm 0 - 300kg NISS044B 1<br />
Heavy 50mm 200 - 400kg NISS010C 1<br />
Heavy 50mm 400 - 600kg NISS020C 1<br />
Heavy - 4”Lift 100mm 400kg - GVM NISS027C 1<br />
Heavy - 6”Lift 150mm 400kg - GVM NISS044C 1<br />
Extra Heavy 50mm 600kg - GVM NISS020D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD004 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA003 2<br />
Lower Trailing Arm LTA003 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
Extended Sway Bar Link Suits 4-7”Lift SBEXT003 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATR15 2<br />
Polyurethane 30mm Provides 25mm Lift PATR30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE004 1<br />
BRACKET KIT<br />
Coil Drop Out Cone IDOC003 1<br />
Coil Retainer Kit ICR003 1<br />
BUSH KIT<br />
Rubber Suspension Arm Bush Kit W/ Standard Radius Arm Bushes 839RK 1<br />
Rubber Suspension Arm Bush Kit W/ Offset Radius Arm Bushes 839CRK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS009BKG<br />
Medium - Foam Cell<br />
NISS009BKF<br />
Medium - Foam Cell 4”Lift RHD NISS026BKF<br />
Medium - Foam Cell 4”Lift LHD NISS026BKFL<br />
Medium - Foam Cell 6”Lift RHD NISS043BKF<br />
Medium - Foam Cell 6”Lift LHD NISS043BKFL<br />
Medium - Foam Cell Pro<br />
NISS009BKP<br />
Medium - Foam Cell Pro 4”Lift RHD NISS026BKP<br />
Medium - Foam Cell Pro 4”Lift LHD NISS026BKPL<br />
Medium - Foam Cell Pro 6”Lift RHD NISS043BKP<br />
Medium - Foam Cell Pro 6”Lift LHD NISS043BKPL<br />
Heavy - Nitro Gas<br />
NISS009CKG<br />
Heavy - Foam Cell<br />
NISS009CKF<br />
Heavy - Foam Cell 4”Lift RHD NISS026CKF<br />
Heavy - Foam Cell 4”Lift LHD NISS026CKFL<br />
Heavy - Foam Cell 6”Lift RHD NISS043CKF<br />
Heavy - Foam Cell 6”Lift LHD NISS043CKFL<br />
Heavy - Foam Cell Pro<br />
NISS009CKP<br />
Heavy - Foam Cell Pro 4”Lift RHD NISS026CKP<br />
Heavy - Foam Cell Pro 4”Lift LHD NISS026CKPL<br />
Heavy - Foam Cell Pro 6”Lift RHD NISS043CKP<br />
Heavy - Foam Cell Pro 6”Lift LHD NISS043CKPL<br />
Extra Heavy - Nitro Gas<br />
NISS020CKG<br />
Extra Heavy - Foam Cell<br />
NISS020CKF<br />
Extra Heavy - Foam Cell Pro<br />
NISS020CKP<br />
Super Heavy - Nitro Gas<br />
NISS024DKG<br />
Super Heavy - Foam Cell<br />
NISS024DKF<br />
Super Heavy - Foam Cell Pro<br />
NISS024DKP<br />
• 4” and 6” lifts may not be legal for on-road use in your area, certification may be required for on-road use<br />
• Due to the extreme nature of 4” and 6” lifts, further modifications may be required, and will vary between vehicles<br />
Such modifications are entirely the owners responsibility. Ironman 4x4 accept no responsibility for any damage or injury caused by use of the these products<br />
50MM SUSPENSION KIT CONTENTS<br />
4” AND 6” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers Caster Plates<br />
Coil Springs<br />
Brake Hoses<br />
Panhard Rods<br />
Adjustable Trailing Arms<br />
Sway Bar Links<br />
244 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Y60 GQ SWB Wagon<br />
1988 to 1998<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL Y60 - 1988-1998<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell - Professional 24091FEP 2<br />
Foam Cell - Performance Suits 5” Lift 24091LFE 2<br />
Foam Cell - Performance Suits 7” Lift 24091LFE1 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
Foam Cell Pro - Performance Suits 5” Lift 45091LFE 2<br />
Foam Cell Pro - Professional Suits 5” Lift 45091LFEP 2<br />
Foam Cell Pro - Performance Suits 7” Lift 45091LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg NISS007B 1<br />
Medium - 5” Lift 125mm 0 - 100kg NISS026B 1<br />
Medium - 7” Lift 175mm 0 - 100kg NISS043B 1<br />
Heavy 50mm 50 - 110kg NISS009B 1<br />
STEERING DAMPER<br />
Foam Cell Pre 8/1989 3534 1<br />
Foam Cell 8/1989+ 3536 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE003 1<br />
Radius Arm Spacer 15mm 833WT 1<br />
4º Drop Box DBOX003 1<br />
CROSSMEMBER SPACER<br />
6mm / 12mm Spacer Kit 1002K 1<br />
STEERING RODS<br />
Adjustable Drag Link ADL003 1<br />
Track Rod ATR003 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod PANHARD003 1<br />
Left Hand Drive Rod PANHARD008 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
Extended Sway Bar Link Suits 4-7”Lift SBEXT003 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATF15 2<br />
Polyurethane 30mm Provides 25mm Lift PATF30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE003 1<br />
Nissan Patrol<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
245
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
Y60 GQ SWB Wagon<br />
1988 to 1998<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Performance Suits 5” Lift 24094LFE 2<br />
Foam Cell - Professional Suits 5” Lift 24094LFEP 2<br />
Foam Cell - Performance Suits 7” Lift 24094LFE1 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Performance Suits 5” Lift 45094LFE 2<br />
Foam Cell Pro - Professional Suits 5” Lift 45094LFEP 2<br />
Foam Cell Pro - Performance Suits 7” Lift 45094LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -200kg NISS008B 1<br />
Medium - 5” Lift 125mm 0 - 300kg NISS027B 1<br />
Medium - 7” Lift 175mm 0 - 300kg NISS044B 1<br />
Heavy 50mm 200 - 400kg NISS010B 1<br />
Extra Heavy 55mm 400kg - GVM NISS010C 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD004 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA003 2<br />
Lower Trailing Arm LTA003 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Suits 1-3”Lift SBEXT006 2<br />
Extended Sway Bar Link Suits 4-7”Lift SBEXT003 2<br />
COIL SPACER<br />
Polyurethane 15mm Provides 10mm Lift PATR15 2<br />
Polyurethane 30mm Provides 25mm Lift PATR30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE004 1<br />
BRACKET KIT<br />
Coil Drop Out Cone IDOC003 1<br />
Coil Retainer Kit ICR003 1<br />
BUSH KIT<br />
Rubber Suspension Arm Bush Kit W/ Standard Radius Arm Bushes 839RK 1<br />
Rubber Suspension Arm Bush Kit W/ Offset Radius Arm Bushes 839CRK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS007BKG<br />
Medium - Foam Cell<br />
NISS007BKF<br />
Medium - Foam Cell 5”Lift RHD NISS026BKF<br />
Medium - Foam Cell 5”Lift LHD NISS026BKFL<br />
Medium - Foam Cell 7”Lift RHD NISS043BKF<br />
Medium - Foam Cell 7”Lift LHD NISS043BKFL<br />
Medium - Foam Cell Pro<br />
NISS007BKP<br />
Medium - Foam Cell Pro 5”Lift RHD NISS026BKP<br />
Medium - Foam Cell Pro 5”Lift LHD NISS026BKPL<br />
Medium - Foam Cell Pro 7”Lift RHD NISS043BKP<br />
Medium - Foam Cell Pro 7”Lift LHD NISS043BKPL<br />
Heavy - Nitro Gas<br />
NISS009BKG<br />
Heavy - Foam Cell<br />
NISS009BKF<br />
Heavy - Foam Cell Pro<br />
NISS009BKP<br />
Extra Heavy - Nitro Gas<br />
NISS009BKG1<br />
Extra Heavy - Foam Cell<br />
NISS009BKF1<br />
Extra Heavy - Foam Cell Pro<br />
NISS009BKP1<br />
• 5” and 7” lifts may not be legal for on-road use in your area, certification may be required for on-road use<br />
• Due to the extreme nature of 5” and 7” lifts, further modifications may be required, and will vary between vehicles<br />
Such modifications are entirely the owners responsibility. Ironman 4x4 accept no responsibility for any damage or injury caused by use of the these products<br />
50MM SUSPENSION KIT CONTENTS<br />
4” AND 6” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers Caster Plates<br />
Coil Springs<br />
Brake Hoses<br />
Panhard Rods<br />
Adjustable Trailing Arms<br />
Sway Bar Links<br />
246 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
MK G160 (Rectangle Headlights)<br />
1984+<br />
Product Description Part No. Qty<br />
Req<br />
Nissan Patrol<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL MK - 1984+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12075GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side (Petrol) 45mm 0 - 50kg NISS005BD/S 1<br />
Medium - Near Side (Petrol) 45mm 0 - 50kg NISS005BN/S 1<br />
STEERING DAMPER<br />
Foam Cell 3522 1<br />
U-BOLTS<br />
U-Bolt Kit Drivers side 452UBK 1<br />
U-Bolt Kit Near side 451UBK 1<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 724UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Stepped Side Plates 665 2<br />
Greasable Pin 470 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12076GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 45mm 0 - 200kg NISS004BD/S 1<br />
Medium - Near Side 45mm 0 - 200kg NISS004BN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 453UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 722UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 664 2<br />
Greasable Pin 470 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
NISS005BKG<br />
Shock Absorbers<br />
Leaf Springs<br />
U-Bolts<br />
Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
247
SUSPENSION TO SUIT<br />
Nissan Patrol<br />
MQ G160 (Round Headlights)<br />
Pre 1984<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN PATROL MQ - PRE 1984<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12075GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side (Petrol) 45mm 0 - 50kg NISS003BD/S 1<br />
Medium - Near Side (Petrol) 45mm 0 - 50kg NISS003BN/S 1<br />
STEERING DAMPER<br />
Foam Cell 3522 1<br />
U-BOLTS<br />
U-Bolt Kit Drivers side 452UBK 1<br />
U-Bolt Kit Near side 451UBK 1<br />
STEEL SPRING BUSHES<br />
Bush Kit 721UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Straight Side Plates 355K 2<br />
Greasable Pin 470 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12076GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 45mm 0 - 200kg NISS004BD/S 1<br />
Medium - Near Side 45mm 0 - 200kg NISS004BN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 453UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 722UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 664 2<br />
Greasable Pin 470 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
NISS003BKG<br />
Shock Absorbers<br />
Leaf Springs<br />
U-Bolts<br />
Polyurethane Spring Bushes<br />
248 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2005+<br />
Nissan Xterra<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN XTERRA - 2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS040B 1<br />
Heavy 35mm 50 - 110kg NISS040C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (Except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12717GR 2<br />
Foam Cell - Performance 24717FE 2<br />
Foam Cell - Professional 24717FEP 2<br />
Foam Cell Pro - Performance 45717FE 2<br />
Foam Cell Pro - Professional 45717FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg NISS047B 2<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 769UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 797-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
NISS047BKG<br />
NISS047BKF<br />
NISS047BKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
249
SUSPENSION TO SUIT<br />
Nissan X-Trail<br />
T30<br />
2001 to 9/2007<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT NISSAN X-TRAIL T30 - 2001-9/2007<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 50kg NISS038B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 -200kg NISS039B 1<br />
250 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION TO SUIT<br />
DT<br />
6/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Ram 1500<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT RAM 1500 DT - 6/2018+<br />
STEEL WINCH BULL BARS<br />
Raid Full Length Steel Tubular Bumper<br />
BBR085E<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL085<br />
Driving Light / Lightbar Patch Loom<br />
IPLS085<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
300W Bright Sabre Dual Row Slim Lightbar 815mm (32”) Straight ILBDR002B 1<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80B 2<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BA 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80BF 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BFA 2<br />
STEEL SIDE STEPS AND RAILS<br />
Raid Side Steps<br />
SS085<br />
REAR PROTECTION<br />
Raid Steel Rear Tubular Bumper<br />
RTB085AU<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red ILED20BFR 2<br />
PREMIUM UNDERBODY PROTECTION<br />
Ram 1500 DT<br />
UBP085<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (No RamBox) - Crew Cab Only with 5.8’ Bed<br />
ISLIDEAWAY075-E<br />
ATLAS RACK KIT<br />
Platform S with Blade Fit Kit to Suit Crew Cab - 1390mm Length<br />
IFR085PSK<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
SUSPENSION TO SUIT RAM 1500 DT - 6/2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro Strut - Performance 45860FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 1.5” Lift 0 - 50kg RAM015A 1<br />
Medium 2” Lift 0 - 60kg RAM015B 1<br />
Heavy 2” Lift 60 - 110kg RAM015C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST075 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA075FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro - Comfort 45862FEC 2<br />
Foam Cell Pro - Performance 45862FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 1.5” Lift 0 - 200kg RAM016A 1<br />
Medium 2” Lift 0 - 300kg RAM016B 1<br />
Heavy 2” Lift 200 - 500kg RAM016C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Foam Cell Pro 1.5” Lift RAM017AKP<br />
Medium - Foam Cell Pro 2” Lift RAM017BKP<br />
Heavy - Foam Cell Pro 2” Lift RAM017CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
251
ACCESSORIES AND SUSPENSION TO SUIT<br />
Ram 1500<br />
DS<br />
2014+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT RAM 1500 DS - 2014+<br />
STEEL WINCH BULL BARS<br />
Raid Full Length Steel Tubular Bumper<br />
BBR075E<br />
Premium - 60.3mm Tube<br />
BBP075<br />
* BBR075E suits vehicles with 6 parking sensor locations<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars and Cube Lights, refer below for available options<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
300W Bright Sabre Dual Row Slim Lightbar 815mm (32”) Straight ILBDR002B 1<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80B 2<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BA 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80BF 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BFA 2<br />
STEEL SIDE STEPS AND RAILS<br />
Raid Side Steps*<br />
SS075<br />
* Only compatible with Crew Cab model<br />
REAR PROTECTION<br />
Raid Steel Rear Tubular Bumper<br />
RTB075AU<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red ILED20BFR 2<br />
PREMIUM UNDERBODY PROTECTION<br />
Ram 1500 DS<br />
UBP075<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (No RamBox) - Crew Cab Only with 5.8’ Bed<br />
ISLIDEAWAY075-E<br />
Electric with Remote Control (With RamBox) - Crew Cab Only with 5.8’ Bed<br />
ISLIDEAWAY075RB-E<br />
ATLAS RACK KIT<br />
Platform S with Blade Fit Kit to Suit Crew Cab - 1390mm Length<br />
IFR075PSK<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
252 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
DS<br />
2014+<br />
Product Description Part No. Qty<br />
Req<br />
Ram 1500<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT RAM 1500 DS - 2014+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro Strut - Performance 45855FE 2<br />
Foam Cell Pro Strut - Long Travel* (SEE NOTE) 45855LFE * 2<br />
*NOTE: MANDATORY FITMENT of UCA075FA and SBEXT075 is required with Long Travel - Foam Cell Pro Strut<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 2” Lift 0 - 50kg RAM015A 1<br />
Medium 2” Lift 0 - 60kg RAM015B 1<br />
Heavy 2” Lift 60 - 110kg RAM015C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST075 2<br />
SWAY BAR LINK<br />
Adjustable Sway Bar Link SBEXT075 2<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA075FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Pro - Comfort 45856FEC 2<br />
Foam Cell Pro - Comfort - Long Travel* (SEE NOTE) 45856LFEC * 2<br />
Foam Cell Pro - Performance 45856FE 2<br />
Foam Cell Pro - Performance - Long Travel* (SEE NOTE) 45856LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 Coil Springs are required with Long Travel - Foam Cell Pro<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 1.5” Lift 0 - 200kg RAM016A 1<br />
Medium 2” Lift 0 - 300kg RAM016B 1<br />
Heavy 2” Lift 200 - 500kg RAM016C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Foam Cell Pro 1.5” Lift RAM016AKP<br />
Medium - Foam Cell Pro 2” Lift RAM016BKP<br />
Medium - Foam Cell Pro* 2.5” Lift RAM016BKP1<br />
Heavy - Foam Cell Pro 2” Lift RAM016CKP<br />
Heavy - Foam Cell Pro* 2.5” Lift RAM016CKP1<br />
* Adjust 45855LFE seat height to 193mm<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Sway Bar Links<br />
Strut Shock Absorbers Strut Mounts Upper Control Arms (2.5” lift kit only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
253
ACCESSORIES TO SUIT<br />
Renault Alaskan<br />
Thai-Built Only<br />
2017+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT RENAULT ALASKAN - 2017+<br />
STEEL WINCH BULL BARS - THAI BUILT MODEL ONLY<br />
Commercial<br />
BBC048<br />
Commercial Deluxe<br />
BBCD048<br />
Proguard No Loop<br />
BBT048-NL<br />
Proguard Single Loop Kit<br />
BB048-SL<br />
Proguard Triple Loop Kit<br />
BB048-TL<br />
Driving Light / Lightbar Patch Loom<br />
IPLS048<br />
STEEL SIDE STEPS AND RAILS - FITS DUAL CAB MODELS ONLY<br />
Side Steps - Dimple Step Design<br />
SS048-D<br />
Side Rails<br />
SS048 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR048-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB048<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB048<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE048<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL048<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW048<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
LONG RANGE FUEL TANK<br />
140L* - Auto/Coil Spring Diesel only. Not compatible with AdBlue equipped models TANK048<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission - Series 1<br />
UBP048<br />
Engine Bay and Transmission - Series 2, 3 and 4<br />
UBP048S<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
White (QM1)<br />
CANOPY013-PW<br />
Cosmic Black (G42)<br />
CANOPY013-CB<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
White (QM1)<br />
CANFIBRE048-PW<br />
Brilliant Silver (K23)<br />
CANFIBRE048-BS<br />
White Diamond (QX1)<br />
CANFIBRE048-WP<br />
Slate Grey (K21)<br />
CANFIBRE048-SG<br />
* Pre-primed canopies, plus colour coding.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
254 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Thai-Built Only<br />
2017+<br />
Product Description Part No. Qty<br />
Req<br />
Renault Alaskan<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT RENAULT ALASKAN - 2015-2020<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12716GR 2<br />
Foam Cell Strut - Performance 24716FE 2<br />
Foam Cell Pro Strut - Performance 45716FE 2<br />
Foam Cell Pro Strut - Performance - Long Travel* (SEE NOTE) 45716LFE * 2<br />
*NOTE: MANDATORY FITMENT of Ironman 4x4 UCA048FA is required with Long Travel - Foam Cell Pro<br />
• Foam Cell Pro contains a single adjusting ring for driveshaft clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg NISS040A 1<br />
Light 20mm 0 - 50kg NISS040B 1<br />
Medium 35mm 0 - 80kg NISS040C 1<br />
Heavy 40mm 50 - 110kg NISS040D 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST007 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA048FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12728GR 2<br />
Foam Cell - Performance 24728FE 2<br />
Foam Cell - Professional 24728FEP 2<br />
Foam Cell Pro - Comfort 45728FEC 2<br />
Foam Cell Pro - Performance 45728FE 2<br />
Foam Cell Pro - Professional 45728FEP 2<br />
• When fitting Foam Cell Pro shock absorbers to the rear of the vehicle, a small modification may be needed on some vehicles to create clearance between the shock body and the lower shock mount gusset on the differential.<br />
Also note the Foam Cell Pro lower eye is offset to assist with clearance.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 20mm 0 - 200kg NISS058A 1<br />
Medium 40mm 0 - 300kg NISS058B 1<br />
Heavy 40mm 300kg - 600kg NISS058C 1<br />
Extra Heavy 45mm 600kg - GVM NISS058D 1<br />
COIL SPACER<br />
Polyurethane 20mm NAVR20 2<br />
SPACER KIT<br />
Sway Bar and Headlight Bracket Extension Kit 1204K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
NISS058BKG<br />
Medium - Foam Cell<br />
NISS058BKF<br />
Medium - Foam Cell Pro<br />
NISS058BKP<br />
Heavy - Nitro Gas<br />
NISS058CKG<br />
Heavy - Foam Cell<br />
NISS058CKF<br />
Heavy - Foam Cell Pro<br />
NISS058CKP<br />
Extra Heavy - Nitro Gas<br />
NISS058DKG<br />
Extra Heavy - Foam Cell<br />
NISS058DKF<br />
Extra Heavy - Foam Cell Pro<br />
NISS058DKP<br />
• Specify front Coil Springs when ordering<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Sway Bar and Headlight Bracket Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
255
SUSPENSION TO SUIT<br />
Renault Duster 2010+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT RENAULT DUSTER - 2010+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12747GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg REN001B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12748GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 200kg REN002B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
REN001BKG<br />
Shock Absorbers<br />
Coil Springs<br />
Camber Correction<br />
256 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Q200 / Q201 / Q205 / Q215 / Q250<br />
10/2018+<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
SsangYong Musso<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SSANGYONG MUSSO - 10/2018+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe (Suits 10/2018-4/2021 Q200/Q201/Q205/Q215 Models)<br />
Commercial Deluxe (Suits 5/2021+ Q215 Facelift & 2022+ Q250 Models)<br />
Driving Light/Lightbar Patch Loom to Suit Ssangyong Musso Q250 2022+<br />
Bull Bar Patch Loom to Suit Ssangyong Musso Q250 2022+<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (Standard Bed)<br />
Electric with Remote Control (XLV Bed)<br />
Sports Bar Adaptor<br />
ATLAS ROOF RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD071<br />
BBCD088<br />
IPLS088<br />
IBBPL088<br />
UBP201SY<br />
ISLIDEAWAY071-E<br />
ISLIDEAWAY071L-E<br />
ISLIDEAWAY071-SBA<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
257
SUSPENSION TO SUIT<br />
SsangYong Musso<br />
Q200 SWB<br />
10/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SSANGYONG MUSSO Q200 - 10/2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12823GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 30mm 0-50kg SSANG003B 1<br />
Heavy 35mm 50-100kg SSANG003C 1<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12824GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 200kg SSANG004B 1<br />
Heavy 40mm 200 - 400kg SSANG004C 1<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
SSANG004BKG<br />
SSANG004CKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Strut Shock Absorbers<br />
Coil Springs<br />
258 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Q201 / Q215 LWB (Coil)<br />
10/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
SsangYong Musso<br />
SUSPENSION TO SUIT SSANGYONG MUSSO Q201 / Q215 - 10/2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12823GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 30mm 0 - 50kg SSANG003B 1<br />
Heavy 35mm 50 - 100kg SSANG003C 1<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12825GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 200kg SSANG006B 1<br />
Heavy 40mm 200 - 400kg SSANG006C 1<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
SSANG006BKG<br />
SSANG006CKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Strut Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
259
SUSPENSION TO SUIT<br />
SsangYong Musso<br />
Q201 / Q205 / Q215 LWB (Leaf)<br />
10/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SSANGYONG MUSSO Q201 / Q205 / Q215 - 10/2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12823GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 30mm 0-50kg SSANG003B 1<br />
Heavy 35mm 50-100kg SSANG003C 1<br />
• Estimated lift is 15mm less in 2020+ models due to factory OEM height increase<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12826GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0-300kg SSANG005B 2<br />
Heavy 50mm 300kg-GVM SSANG005C 2<br />
U-BOLTS<br />
U-Bolt Kit 1105UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1153UK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
SSANG005BKG<br />
SSANG005CKG<br />
Shock Absorbers Coil Springs U-Bolts<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
260 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
1996 to 2006<br />
SUSPENSION TO SUIT<br />
SsangYong<br />
Musso / Korando<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SSANGYONG MUSSO / KORANDO - 1996-2006<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars SSANG001 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12661GRS 2<br />
Foam Cell - Performance 24661FES 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 -200kg SSANG002B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
SSANG002BKG<br />
SSANG002BKF<br />
Shock Absorbers<br />
Coil Springs<br />
Torsion Bars<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
261
ACCESSORIES TO SUIT<br />
SsangYong Rexton<br />
Y400<br />
10/2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SSANGYONG REXTON Y400 - 10/2018+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD071<br />
UBP201SY<br />
IDIFFBRE<br />
262 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Y400 / Y450<br />
2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
SsangYong Rexton<br />
SUSPENSION TO SUIT SSANGYONG REXTON Y400 / Y450 - 10/2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12823GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 30mm 0-50kg SSANG003B 1<br />
Heavy 35mm 50-100kg SSANG003C 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance* 12828GR 2<br />
* Vehicles in some regions may use rear shock absorber 12825GR, please check lower mounting specification.<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0-200kg SSANG010B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
SSANG010BKG<br />
Shock Absorbers<br />
Strut Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
263
ACCESSORIES AND SUSPENSION TO SUIT<br />
Subaru Forester 2019+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SUBARU FORESTER - 2019+<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Crossbar (x 2) and Fit Kit - 1375mm Width<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IFRK094<br />
IDIFFBRE<br />
SUSPENSION TO SUIT SUBARU FORESTER - 2019+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly Left - Medium 50mm 0 - 50kg 12830007GRLH 1<br />
Nitro Gas Strut Assembly Right- Medium 50mm 0 - 50kg 12830007GRRH 1<br />
Nitro Gas Strut Assembly Left - Heavy 50mm 50 - 80kg 12830007GRPLH 1<br />
Nitro Gas Strut Assembly Right- Heavy 50mm 50 - 80kg 12830007GRPRH 1<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
REAR SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly - Medium 50mm 0 - 200kg 12832008GR 2<br />
Nitro Gas Strut Assembly - Heavy 50mm 200kg - GVM 12832008GRP 2<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
SPACER KIT<br />
Sway Bar Relocation Kit 1216K 1<br />
Sub Frame Alignment Kit 1215K 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
SUB007BKG<br />
SUB007CKG<br />
Left / Right Front Strut Assemblies<br />
Rear Strut Assemblies<br />
Rear Subframe Alignment Kit<br />
Sway Bar Relocation Kit<br />
264 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
SF5, GX, RX, GT<br />
1997 to 2013<br />
Product Description Part No. Qty<br />
Req<br />
Subaru Forester<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUBARU FORESTER SF5, GX, RX, GT - 1997-2013<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - 1997 - 2001 35mm 0 - 50kg SUB001B 1<br />
Medium - 2002 - 2008 35mm 0 - 50kg SUB003B 1<br />
Medium - 2008 - 2013 20mm 0 - 50kg SUB005B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER14 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - 1997 - 2001 35mm 0 - 200kg SUB002B 1<br />
Medium - 2002 - 2008 35mm 0 - 200kg SUB004B 1<br />
Medium - 2008 - 2013 20mm 0 - 200kg SUB006B 1<br />
• Not suitable for self levelling suspension models<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER14 1<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
265
ACCESSORIES AND SUSPENSION TO SUIT<br />
Subaru Outback<br />
2015 to 2019<br />
2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SUBARU OUTBACK - 2015+<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Crossbar (x 2) and Fit Kit - 1375mm Width<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IFRK094<br />
IDIFFBRE<br />
SUSPENSION TO SUIT SUBARU OUTBACK - 2015+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly Left - Medium (2015-2019) 50mm 0 - 50kg 12833009GRLH 1<br />
Nitro Gas Strut Assembly Right- Medium (2015-2019) 50mm 0 - 50kg 12833009GRRH 1<br />
Nitro Gas Strut Assembly Left - Heavy (2015-2019) 50mm 50 - 80kg 12833009GRPLH 1<br />
Nitro Gas Strut Assembly Right- Heavy (2015-2019) 50mm 50 - 80kg 12833009GRPRH 1<br />
Nitro Gas Strut Assembly Left - Medium (2020+) 50mm 0 - 50kg 12831009GRLH 1<br />
Nitro Gas Strut Assembly Right- Medium (2020+) 50mm 0 - 50kg 12831009GRRH 1<br />
Nitro Gas Strut Assembly Left - Heavy (2020+) 50mm 50 - 80kg 12831009GRPLH 1<br />
Nitro Gas Strut Assembly Right- Heavy (2020+) 50mm 50 - 80kg 12831009GRPRH 1<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
• Gen 5 (2015-2019) uses 8mm Strut Top Studs - Gen 6 (2020+) uses 10mm Strut Top Studs<br />
REAR SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly - Medium (2015-2019) 50mm 0 - 200kg 12834010GR 2<br />
Nitro Gas Strut Assembly - Heavy (2015-2019) 50mm 200kg - GVM 12834010GRP 2<br />
Nitro Gas Strut Assembly - Medium (2020+) 50mm 0 - 200kg 12834014GR 2<br />
Nitro Gas Strut Assembly - Heavy (2020+) 50mm 200kg - GVM 12834014GRP 2<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
SPACER KIT<br />
Sub Frame Alignment Kit 1215K 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas (2015-2019)<br />
Heavy - Nitro Gas (2015-2019)<br />
Medium - Nitro Gas (2020+)<br />
Heavy - Nitro Gas (2020+)<br />
SUSPENSION KIT CONTENTS<br />
SUB009BKG<br />
SUB009CKG<br />
SUB009BKG1<br />
SUB009CKG1<br />
Left / Right Front Strut Assemblies<br />
Rear Strut Assemblies<br />
Rear Subframe Alignment Kit<br />
266 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION TO SUIT<br />
2018+<br />
Subaru XV Crosstrek<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SUBARU XV CROSSTREK - 2018+<br />
STEEL TUBE PROTECTION BAR<br />
Tubular Bumper Bar<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Crossbar (x 2) and Fit Kit - 1375mm Width<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ITBR094<br />
IFRK094<br />
IDIFFBRE<br />
SUSPENSION TO SUIT SUBARU XV CROSSTREK - 2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly Left - Medium 50mm 0 - 50kg 12835011GRLH 1<br />
Nitro Gas Strut Assembly Right- Medium 50mm 0 - 50kg 12835011GRRH 1<br />
Nitro Gas Strut Assembly Left - Heavy 50mm 50 - 80kg 12835011GRPLH 1<br />
Nitro Gas Strut Assembly Right- Heavy 50mm 50 - 80kg 12835011GRPRH 1<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
REAR SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly - Medium 50mm 0 - 200kg 12836012GR 2<br />
Nitro Gas Strut Assembly - Heavy 50mm 200kg - GVM 12836012GRP 2<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
SPACER KIT<br />
Sway Bar Relocation Kit 1216K 1<br />
Sub Frame Alignment Kit 1215K 1<br />
EXHAUST HANGER KIT<br />
Exhaust Hanger Rubber IEXH4075 3<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
SUB011BKG<br />
SUB011CKG<br />
Left / Right Front Strut Assemblies Rear Subframe Alignment Kit Exhaust Hanger Rubbers<br />
Rear Strut Assemblies<br />
Sway Bar Relocation Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
267
ACCESSORIES TO SUIT<br />
Suzuki Jimny<br />
GJ<br />
2018+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SUZUKI JIMNY GJ - 2018+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe*<br />
BBCD070<br />
Jimny Special*<br />
BBS070<br />
Driving Light / Lightbar Patch Loom<br />
IPLS070<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL070<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
• Uses factory fog/DRL Lights. Suits factory flares<br />
* Black textured paint<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP070<br />
STEEL SIDE STEPS<br />
Side Steps<br />
SS070<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
IRRCAGE14-ALLOY<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
IRROPEN14-ALLOY<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 100mm (8 Feet)<br />
IRRFEET100<br />
PREMIUM UNDERBODY PROTECTION<br />
Transfer Case, Driveline and Exhaust<br />
UBP070<br />
SNORKEL<br />
2018+ ISNORKEL070<br />
ATLAS ROOF RACK KIT<br />
Crossbar (x 2) and Fit Kit - 1500mm Width<br />
IFR070C2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC070-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC070-CC-2R-A<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
268 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
GJ<br />
2018+<br />
Product Description Part No. Qty<br />
Req<br />
Suzuki Jimny<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI JIMNY GJ - 2018+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12759GR 2<br />
STEERING DAMPER<br />
Foam Cell 3542 1<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg SUZ009B 1<br />
Heavy 50mm 50 - 80kg SUZ009C 1<br />
CHASSIS DROPMEMBER<br />
Front Crossmember Drop Brackets IDM009 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Rubber 2 Degree offset 1146RK 1<br />
BUMP STOP<br />
Extended Bump Stop 1219R 2<br />
• Must install 1219R extended bump stop when fitting 1146RK<br />
• Must install IDM009 Dropmember when fitting 1146RK and 12759GR<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12760GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - RHD 50mm 0 - 200kg SUZ010B 1<br />
Medium - LHD 50mm 0 - 200kg SUZ011B 1<br />
Heavy - RHD 50mm 200 - 400kg SUZ010C 1<br />
Heavy - LHD 50mm 200 - 400kg SUZ011C 1<br />
• SUZ010 are staggered height for Japan Spec vehicles, SUZ011 are equal height for Euro spec vehicles<br />
BRAKE HOSE<br />
Extended Brake Hose Left side BHOSE009 1<br />
SPACER KIT<br />
Extended Headlight Sensor Bracket 1211K 1<br />
• Must install BHOSE009 and 1211K when fitting 12760GR<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
SUZ010BKG<br />
SUZ010CKG<br />
Shock Absorbers Extended Brake Hose Front Crossmember Drop Brackets<br />
Coil Springs<br />
Extended Headlight Sensor Bracket<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 409<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
269
ACCESSORIES TO SUIT<br />
Suzuki Jimny 2012 to 1/2019<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SUZUKI JIMNY - 2012-1/2019<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD063<br />
IDIFFBRE<br />
270 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
SN413<br />
1998 to 2018<br />
Product Description Part No. Qty<br />
Req<br />
Suzuki Jimny<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI JIMNY SN413 - 1998-2018<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12759GR 2<br />
STEERING DAMPER<br />
Foam Cell Includes Adaptor Kit 3521S 1<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -50kg SUZ009B 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Rubber 2 Degree offset 1146RK 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12760GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - Japan Spec 50mm 0 -200kg SUZ010B 1<br />
Medium - Euro Spec 50mm 0 -200kg SUZ011B 1<br />
• SUZ010B are staggered height for Japan Spec vehicles, SUZ011B are equal height for Euro spec vehicles<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
• Specify rear Coil Springs when ordering<br />
SUZ009BKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
271
SUSPENSION TO SUIT<br />
Suzuki Sierra<br />
SJ80 (Coil)<br />
1997+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI SIERRA SJ80 - 1997+<br />
FRONT SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 -40kg SUZ007B 1<br />
OFFSET CASTER BUSH KIT<br />
Offset Bush Kit Rubber 2 Degree offset 1146RK 1<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 -200kg SUZ008B 1<br />
272 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Samurai LJ, SJ (Leaf)<br />
1981+<br />
Product Description Part No. Qty<br />
Req<br />
Suzuki Sierra<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI SIERRA SAMURAI LJ, SJ - 1981+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12085GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 50mm 0 - 50kg SUZ001BD/S 1<br />
Medium - Near Side 50mm 0 - 50kg SUZ001BN/S 1<br />
STEERING DAMPER<br />
Foam Cell 3530 1<br />
U-BOLTS<br />
U-Bolt Kit Drivers side 654UBK 1<br />
U-Bolt Kit Near side 655UBK 1<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 734UK 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12086GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 200kg SUZ002B 2<br />
Medium - Optional +20mm 50mm 0 - 200kg SUZ002BD/S 1<br />
• Optional D/S spring to offset uneven weight distribution, eg. Spare Wheel<br />
U-BOLTS<br />
U-Bolt Kit 655UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 734UK 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP5 1<br />
SUSPENSION KIT - Specify Rear Spring When Ordering<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
SUZ001BKG<br />
Shock Absorbers<br />
Leaf Springs<br />
U-Bolts<br />
Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
273
ACCESSORIES TO SUIT<br />
Suzuki Grand Vitara 8/2005 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT SUZUKI GRAND VITARA - 8/2005-2015<br />
STEEL WINCH BULL BARS - 2012 DIESEL MANUAL ONLY - NOT COMPATIBLE WITH V6 MODEL<br />
Commercial Deluxe - Diesel Manual Only<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD046<br />
IDIFFBRE<br />
274 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
8/2005 to 2015<br />
Suzuki Grand Vitara<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI GRAND VITARA - 8/2005-2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance McPherson Strut 12721GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg SUZ019B 1<br />
Heavy or Diesel, or 2.7L 40mm 50 - 100kg SUZ019C 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER14 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12722GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB (GV3) 40mm 0 - 200kg SUZ020A 1<br />
Medium - LWB 40mm 0 - 200kg SUZ020B 1<br />
Heavy - LWB 40mm 200 - 400kg SUZ020C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB GV3 SUZ019AKG<br />
Medium - Nitro Gas LWB SUZ019BKG<br />
Heavy - Nitro Gas LWB SUZ019CKG<br />
• SWB refers 3 door vehicles, LWB refers 5 door vehicles<br />
• Monocoque constructed vehicles such as Suzuki Grand Vitara can be subject to increased NVH (Noise) with upgraded suspension installed<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Camber Correction<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
275
SUSPENSION TO SUIT<br />
Suzuki Grand Vitara 1988 to 7/2005<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI GRAND VITARA - 1988-7/2005<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance Full replacement strut 12083GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - 4 Cyl Carb 35mm 0 - 50kg SUZ005B 1<br />
Medium - V6 / 4 Cyl Inj 35mm 0 - 50kg SUZ015B 1<br />
Medium - XL7 35mm 0 - 50kg SUZ017B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance SWB 12089GR 2<br />
Nitro Gas - Performance LWB 12658GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 35mm 0 - 200kg SUZ013B 1<br />
Medium - LWB 35mm 0 - 200kg SUZ016B 1<br />
Medium - XL7 35mm 0 - 200kg SUZ018B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB SUZ013BKG<br />
Medium - Nitro Gas LWB SUZ016BKG<br />
Medium - Nitro Gas XL7 SUZ018BKG<br />
• SWB suits short wheel base vehicles<br />
• LWB Suits long wheel base vehicles<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Camber Correction<br />
276 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1988+<br />
Suzuki Vitara<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT SUZUKI VITARA - 1988+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance Full replacement strut 12083GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 35mm 0 - 50kg SUZ003B 1<br />
Medium - LWB 35mm 0 - 50kg SUZ005B 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER12 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance SWB 12089GR 2<br />
Nitro Gas - Performance LWB 12658GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 35mm 0 - 200kg SUZ004B 1<br />
Medium - LWB 35mm 0 - 200kg SUZ006B 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB SUZ003BKG<br />
Medium - Nitro Gas LWB SUZ005BKG<br />
• SWB suits short wheel base vehicles<br />
• LWB Suits long wheel base vehicles<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Camber Correction<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
277
ACCESSORIES TO SUIT<br />
Toyota 4Runner<br />
Gen 5, N280<br />
2009+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA 4RUNNER - 2009+<br />
STEEL WINCH BULL BARS<br />
Raid Stubby Bumper - Not Available in Australia<br />
BBR078<br />
• Raid Bull Bars are compatible with Ironman 4x4 Lightbars, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
75W Bright Sabre Single Row Lightbar 524mm (20”) Straight ILBSR003BW 1<br />
STEEL SIDE STEPS<br />
Raid Rock Slider<br />
SS078<br />
TOWING<br />
Raid Rear Bumper*<br />
RTB078<br />
* Compatible with Ironman 4x4 Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS (4 CUBE LIGHTS PER VEHICLE)<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20B 2<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear ILED20BF 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber ILED20BFA 2<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red ILED20BFR 2<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission for models without KDSS<br />
UBP047<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
278 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Gen 4 and 5, N210-N280<br />
2003+<br />
Product Description Part No. Qty<br />
Req<br />
Toyota 4Runner<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA 4RUNNER - 2003+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 50kg TOY055B 1<br />
Medium 45mm 0 - 50kg TOY065B 1<br />
Heavy 45mm 50 - 110kg TOY065C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
Offset Sway Bar Bracket 1209K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12682GRC 2<br />
Nitro Gas - Professional 12682GRP 2<br />
Foam Cell - Comfort 24682FEC 2<br />
Foam Cell - Professional 24682FEP 2<br />
Foam Cell Pro - Comfort 45682FEC 2<br />
Foam Cell Pro - Professional 45682FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 300kg TOY056A 1<br />
Medium 45mm 0 - 300kg TOY056B 1<br />
Heavy 45mm 300kg - GVM TOY056C 1<br />
Air Bag Delete Kit 1218ADK 1<br />
COIL SPACER<br />
Polyurethane 20mm LCPR20 2<br />
Polyurethane 25mm LCPR25 2<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD015 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT006 2<br />
KDSS Spacer Brackets 1220K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY055AKG<br />
TOY055AKF<br />
TOY055AKP<br />
TOY055BKG<br />
TOY055BKF<br />
TOY055BKP<br />
TOY055CKG<br />
TOY055CKF<br />
TOY055CKP<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Offset Sway Bar Bracket (Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
279
SUSPENSION TO SUIT<br />
Toyota 4Runner<br />
Gen 3 N180-N185<br />
1996 to 2002<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA 4RUNNER - 1996-2002<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12691GR 2<br />
Foam Cell Strut - Performance 24691FE 2<br />
Foam Cell Pro Strut - Performance 45691FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 50kg TOY038B 1<br />
Heavy 45mm 50 - 110kg TOY038C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12661GR 2<br />
Foam Cell - Performance 24661FE 2<br />
Foam Cell Pro - Performance 45661FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 200kg TOY039A 1<br />
Medium 45mm 0 - 300kg TOY039B 1<br />
Heavy 45mm 300kg - GVM TOY039C 1<br />
COIL SPACER<br />
Polyurethane 20mm LCF20 2<br />
Polyurethane 30mm LCF30 2<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY038AKG<br />
TOY038AKF<br />
TOY038AKP<br />
TOY038BKG<br />
TOY038BKF<br />
TOY038BKP<br />
TOY038BKG1<br />
TOY038BKF1<br />
TOY038BKP1<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
280 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Gen 2 Surf, N130 V6 (Coil)<br />
1990 to 1997<br />
Product Description Part No. Qty<br />
Req<br />
Toyota 4Runner<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA 4RUNNER - 1990-1997<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12088GR 2<br />
Foam Cell - Performance 24088FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars TOY026 1<br />
• Minimum 60mm downward suspension travel required after adjustment.<br />
STEERING DAMPER<br />
Foam Cell 3533 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12637GRC 2<br />
Nitro Gas - Performance 12637GR 2<br />
Foam Cell - Comfort 24637FEC 2<br />
Foam Cell - Performance 24637FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 -200kg TOY023B 1<br />
Heavy 45mm 200kg - GVM TOY023C 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY023BKG<br />
TOY023BKF<br />
TOY023CKG<br />
TOY023CKF<br />
Shock Absorbers<br />
Coil Springs<br />
Torsion Bars<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
281
SUSPENSION TO SUIT<br />
Toyota 4Runner<br />
Gen 1, N60 (Leaf)<br />
1988 to 1997<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA 4RUNNER - 1988-1997<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12088GR 2<br />
Foam Cell - Performance 24088FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars TOY026 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell 3533 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell - Professional 24650FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -300kg TOY011B 2<br />
Heavy 50mm 300kg - GVM TOY011C 2<br />
• 1200mm Leaf Length<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 733UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Straight Shackle 386 2<br />
Greasable Shackle Straight Shackle Extended 5mm 386-2 2<br />
Greasable Pin 385 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY011BKG<br />
TOY011BKF<br />
TOY011CKG<br />
TOY011CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
282 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION TO SUIT<br />
2019+<br />
Toyota Rav4<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA RAV4 - 2019+<br />
STEEL TUBE PROTECTION BAR<br />
Tubular Bumper Guard<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
Towbar Wiring Loom - Plug and Play<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Crossbar (x 2) and Fit Kit - 1250mm Width<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ITBR091<br />
RTB091<br />
ITBL091<br />
IFRK091<br />
FLMT091-RHD-2ROW<br />
SC091-CC-1R-A<br />
SC091-CC-2R-A<br />
SUNSHD091<br />
IDIFFBRE<br />
SUSPENSION TO SUIT TOYOTA RAV4 - 2019+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER Est. Lift Additional Load<br />
Nitro Gas Strut Assembly Left 50mm 0 - 50kg 12840080GR LH 1<br />
Nitro Gas Strut Assembly Right 50mm 0 - 50kg 12840080GR RH 1<br />
• Strut Assembly includes pre-assembled Coil Springs, Shock Absorber and Strut Top Cap<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 50mm 0-50kg TOY080A 1<br />
CAMBER CORRECTION<br />
Camber Bolt Kit ICAMBER17 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12842GR 2<br />
Nitro Gas - Professional 12842GRP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 50mm 0-200kg TOY082A 1<br />
Medium 50mm 0-200kg TOY082B 1<br />
Constant 50mm 150 - 300kg TOY082C 1<br />
Constant 50mm 300kg - GVM TOY082D 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Medium - Nitro Gas<br />
Constant - Nitro Gas<br />
Constant - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
TOY080AKG<br />
TOY080BKG<br />
TOY080CKG<br />
TOY080DKG<br />
Left / Right Front Strut Assemblies<br />
Rear Shock Absorbers<br />
Rear Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
283
ACCESSORIES TO SUIT<br />
Toyota FJ Cruiser 2006+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA FJ CRUISER - 2006+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD037<br />
UBP047<br />
IDIFFBRE<br />
284 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2006+<br />
Toyota FJ Cruiser<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA FJ CRUISER - 2006+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
• Foam Cell Pro, must fit 1198K spacer for Sway Bar clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 50kg TOY055A 1<br />
Medium 45mm 0 - 50kg TOY055B 1<br />
Heavy 45mm 50 - 110kg TOY055C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
Offset Sway Bar Bracket 1209K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12682GRC 2<br />
Nitro Gas - Performance 12682GR 2<br />
Nitro Gas - Professional 12682GRP 2<br />
Foam Cell - Comfort 24682FEC 2<br />
Foam Cell - Performance 24682FE 2<br />
Foam Cell - Professional 24682FEP 2<br />
Foam Cell Pro - Comfort 45682FEC 2<br />
Foam Cell Pro - Performance 45682FE 2<br />
Foam Cell Pro - Professional 45682FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 300kg TOY056A 1<br />
Medium 50mm 0 - 300kg TOY056B 1<br />
Heavy 50mm 300kg - GVM TOY069B 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD015 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT006 2<br />
BUMP STOP<br />
Internal Rubber Cone 1218R 2<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY055AKG<br />
TOY055AKF<br />
TOY055AKP<br />
TOY055BKG<br />
TOY055BKF<br />
TOY055BKP<br />
TOY055CKG<br />
TOY055CKF<br />
TOY055CKP<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Offset Sway Bar Bracket (Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
285
ACCESSORIES TO SUIT<br />
Toyota Fortuner<br />
2015 to 9/2020<br />
(Facelift) 2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA FORTUNER - 2015+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe - (2015 to 2/2020 Only)<br />
BBCD053<br />
Commercial Deluxe - (2020+ facelift Only)<br />
BBCD081<br />
Proguard No Loop - (2015 to 2/2020 Only)<br />
BBT053-NL<br />
Proguard No Loop - (2020+ facelift Only)<br />
BBT081-NL<br />
Proguard Single Loop Kit - (2015 to 2/2020 Only)<br />
BB053-SL<br />
Proguard Single Loop Kit - (2020+ facelift Only)<br />
BB081-SL<br />
Proguard Triple Loop Kit - (2015 to 2/2020 Only)<br />
BB053-TL<br />
Proguard Triple Loop Kit - (2020+ facelift Only)<br />
BB081-TL<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps - Dimple Step Design<br />
SS053-D<br />
Side Rails<br />
SS053 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR053-D<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP051<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP051<br />
SNORKEL<br />
2.8L Diesel ISNORKEL053<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
286 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2015+<br />
Toyota Fortuner<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA FORTUNER - 2015+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12730GR 2<br />
Foam Cell Strut - Performance 24730FE 2<br />
Foam Cell Pro Strut - Performance 45730FE 2<br />
• Operating clearance to sway bar can be increased by installing1210K offset sway bar bracket<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 30mm 0 - 50kg TOY055A 1<br />
Heavy 40mm 50 - 110kg TOY055B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SWAY BAR<br />
Offset Sway Bar Bracket 1210K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12743GRC 2<br />
Nitro Gas - Performance 12743GR 2<br />
Foam Cell - Comfort 24743FEC 2<br />
Foam Cell - Performance 24743FE 2<br />
Foam Cell Pro - Comfort 45743FEC 2<br />
Foam Cell Pro - Performance 45743FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 200kg TOY017S 1<br />
Medium 30mm 0 - 200kg TOY017A 1<br />
Heavy 40mm 100 - 300kg TOY017B 1<br />
• Possible driveline vibration may occur, use 1192K Centre Bearing Spacer Kit<br />
SPACER KIT<br />
Centre Bearing Spacer Kit 1192K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• Possible driveline vibration may occur if raised above 40mm<br />
TOY017AKG1<br />
TOY017AKF1<br />
TOY017AKP1<br />
TOY017BKG1<br />
TOY017BKF1<br />
TOY017BKP1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Offset Sway Bar Bracket (Pro Kits Only)<br />
Coil Springs<br />
Centre Bearing Spacer Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
287
Product Description Part No. Qty<br />
Req<br />
sometimes the best things in life come in fun size<br />
for a full range of accessories visit our website<br />
www.ironman4x4.com<br />
Family Owned Australian Company<br />
Since 1958
SUSPENSION TO SUIT<br />
2004 to 2015<br />
Toyota Fortuner<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA FORTUNER - 2004-2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
• Foam Cell Pro, must fit 1198K spacer for Sway Bar clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg TOY038B 1<br />
Medium 45mm 0 - 50kg TOY055A 1<br />
Heavy 45mm 50 - 110kg TOY055B 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12743GRC 2<br />
Nitro Gas - Performance 12743GR 2<br />
Foam Cell - Comfort 24743FEC 2<br />
Foam Cell - Performance 24743FE 2<br />
Foam Cell Pro - Comfort 45743FEC 2<br />
Foam Cell Pro - Performance 45743FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 200kg TOY017S 1<br />
Light 40mm 0 - 200kg TOY017A 1<br />
Medium 45mm 0 - 300kg TOY017B 1<br />
SPACER KIT<br />
Centre Bearing Spacer Kit 1192K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Standard - Nitro Gas<br />
Standard - Foam Cell<br />
Standard - Foam Cell Pro<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY017SKG<br />
TOY017SKF<br />
TOY017SKP<br />
TOY017AKG<br />
TOY017AKF<br />
TOY017AKP<br />
TOY017BKG<br />
TOY017BKF<br />
TOY017BKP<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Sway Bar Spacer (Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
289
SUSPENSION TO SUIT<br />
Toyota Hiace<br />
Series 300<br />
2019+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HIACE - 2019+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Strut - Performance Left Hand Side 24840FELH 1<br />
Foam Cell - Performance Right Hand Side 24840FERH 1<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 - 50kg TOY072B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell - Comfort 24842FEC 2<br />
Foam Cell - Performance 24842FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - (Single Stage Parabolic) 45mm 0 - 300kg TOY073B 2<br />
Heavy - (Dual Stage Parabolic) 45mm 300kg - GVM TOY073C 2<br />
U-BOLTS<br />
U-Bolt Kit 1106UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1154UK 1<br />
SUSPENSION KIT<br />
Medium - Foam Cell<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY074BKF<br />
TOY074CKF<br />
Shock Absorbers Coil Springs U-Bolts<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
290 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Series 200<br />
2005 to 2019<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Hiace<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HIACE - 2005-2019<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12667GR 2<br />
Foam Cell - Performance 24667FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars TOY042 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12805GRC 2<br />
Nitro Gas - Performance 12805GR 2<br />
Foam Cell - Performance 24805FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Heavy 40mm 400kg - GVM TOY044C 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 728UKL 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY044CKG<br />
TOY044CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
291
Product Description Part No. Qty<br />
Req<br />
Life‘s a Beach
ACCESSORIES TO SUIT<br />
Rogue Wide Body<br />
8/2022+<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Hilux<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA HILUX ROGUE WIDE BODY - 2023+<br />
STEEL WINCH BULL BARS - CURRENTLY IN DEVELOPMENT<br />
Driving Light / Lightbar Patch Loom<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IPLS076<br />
ITD1300<br />
ISD1300<br />
IFR065PAK<br />
IFR065C2K<br />
FLMT051-RHD-2ROW<br />
SC065-CC-1R-A<br />
SC065-CC-2R-A<br />
SUNSHD051<br />
IDIFFBRE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
293
Product Description Part No. Qty<br />
Req<br />
294
Product Description Part No. Qty<br />
Req<br />
HILUX<br />
ROGUE<br />
ACCESSORIES AND SUSPENSION TO SUIT<br />
CURRENTLY IN DEVELOPMENT<br />
295
ACCESSORIES TO SUIT<br />
Toyota Hilux 8/2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA HILUX - 8/2020+<br />
STEEL WINCH BULL BARS<br />
Commercial - Narrow body Hilux WorkMate Aus and NZ only (1780mm Width)<br />
BBC065-NB<br />
Commercial Deluxe - Standard body width (1860mm Width)<br />
BBCD076<br />
Commercial Deluxe - Narrow body Hilux all regions excluding Aus and NZ (1780mm Width)<br />
BBCD076-NB<br />
Proguard No Loop - Standard body width (1860mm Width)<br />
BBT076-NL<br />
Proguard Single Loop Kit<br />
BB076-SL<br />
Proguard Triple Loop Kit<br />
BB076-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL076<br />
Driving Light / Lightbar Patch Loom<br />
IPLS076<br />
Driving Light / Lightbar Patch Loom (LED Headlights Only) - While Stocks Last<br />
IPL065<br />
• Winch with Steel Cable and Roller Fairlead is not suitable with BBCD076 or BBT076 - Use Winch with Synthetic Rope and Alloy Hawse only<br />
• Standard body width - 1860mm<br />
• Narrow body width - 1780mm<br />
STEEL SIDE STEPS AND RAILS - DUAL CAB MODELS ONLY<br />
Side Steps - Dimple Step Design<br />
SS051-D<br />
Side Rails<br />
SS051 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR051-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB051<br />
Rear Protection Towbar - Full Rear Bumper Replacement - With Side Tubes<br />
RTB051-SP<br />
Rear Protection Towbar - Full Rear Bumper Replacement - Suits Cross Traffic Radar Models<br />
RTB051-SPR<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE001<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL076<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points (Pair)<br />
IRP051<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW051<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
2.8L Turbo Diesel ISNORKEL051<br />
Narrow Body Model<br />
ISNORKEL076N<br />
LONG RANGE FUEL TANK<br />
135L* - 2.8L Diesel 4WD Dual Cab TANK051<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP051<br />
296 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES TO SUIT<br />
8/2020+<br />
Toyota Hilux<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
A DECK<br />
Super White (040)<br />
CANFIBRE051-SW<br />
Silver Metallic / Silver Sky (1D6)<br />
CANFIBRE051-SM<br />
Attitude Black (218)<br />
CANFIBRE051-AB<br />
Dark Grey (1G3)<br />
CANFIBRE051-DG<br />
• Fits A Deck 4x4 and 4x2 Dual Cab models<br />
CANOPY - PINNACLE 2 SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
A DECK<br />
Pre-Primed<br />
ICANOPY051-P<br />
Super White (040)<br />
ICANOPY051-SW<br />
Silver Metallic / Silver Sky (1D6)<br />
ICANOPY051-SM<br />
Attitude Black (218)<br />
ICANOPY051-AB<br />
Dark Grey (1G3)<br />
ICANOPY051-DG<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control*<br />
ISLIDEAWAY051-E<br />
Electric with Remote Control - J Deck<br />
ISLIDEAWAY051JD-E<br />
Manual Operation*<br />
ISLIDEAWAY051-M<br />
Manual Operation - J Deck<br />
ISLIDEAWAY051JD-M<br />
Sports Bar Adaptor (SR5 Sports Bar only)<br />
ISLIDEAWAY051-SBA<br />
* Suits A Deck models only<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR065PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
IFR065C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab)<br />
IFF6076<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT051-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC065-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC065-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD051<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
297
SUSPENSION TO SUIT<br />
Toyota Hilux 8/2020+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HILUX - 8/2020+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12730GR 2<br />
Foam Cell Strut - Performance 24730FE 2<br />
Foam Cell Pro Strut - Performance 45730FE 2<br />
• Operating clearance to sway bar can be increased by installing1210K offset sway bar bracket<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg TOY055A 1<br />
Light 20mm 0 - 50kg TOY055B 1<br />
Light 45mm 0 - 50kg TOY065A 1<br />
Medium 30mm 0 - 50kg TOY055C 1<br />
Medium - with Accessories 45mm 0 - 50kg TOY065B 1<br />
Heavy 45mm 50 - 110kg TOY065C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SWAY BAR<br />
33mm Sway Bar ISB80F 1<br />
Offset Sway Bar Bracket 1210K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12081GRC 2<br />
Nitro Gas - Performance 12081GR 2<br />
Foam Cell - Comfort 24081FEC 2<br />
Foam Cell - Performance 24081FE 2<br />
Foam Cell - Professional 24081FEP 2<br />
Foam Cell Pro - Comfort 45081FEC 2<br />
Foam Cell Pro - Performance 45081FE 2<br />
Foam Cell Pro - Professional 45081FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 -100kg TOY077A 2<br />
Medium 45mm 0 -200kg TOY077B 2<br />
Heavy 45mm 200 - 400kg TOY077C 2<br />
Extra Heavy 45mm 400kg - GVM TOY077D 2<br />
• New spring pins 387-1 may be required, as OEM orientation may require cutting for removal<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 767UK 1<br />
SPACER KIT<br />
Centre Bearing Spacer Kit 1192K 1<br />
Headlight Adjustment Leaf Spring Bracket (SR5 Only) 1213K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1155 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
298 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
8/2020+<br />
Toyota Hilux<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
TOY077AKG<br />
TOY077AKF<br />
TOY077AKP<br />
TOY077BKG<br />
TOY077BKF<br />
TOY077BKP<br />
TOY077CKG<br />
TOY077CKF<br />
TOY077CKP<br />
TOY077DKG<br />
TOY077DKF<br />
TOY077DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Non-Greasable Pins<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes Offset Sway Bar Bracket (Pro Kits Only)<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 410<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
299
ACCESSORIES TO SUIT<br />
Toyota Hilux<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
Revo<br />
2015 to 4/2018<br />
(Facelift) 5/2018 to 7/2020<br />
ACCESSORIES TO SUIT TOYOTA HILUX - 2015-7/2020<br />
STEEL WINCH BULL BARS SUITS<br />
Commercial - (2015 to 4/2018 Only) * BBC051 *<br />
Commercial - (5/2018 to 7/2020 Only) * BBC065 *<br />
Commercial Deluxe - (2015 to 4/2018 Only) * BBCD051 *<br />
Commercial Deluxe - (5/2018 to 7/2020 Only) * BBCD065 *<br />
Proguard No Loop - (2015 to 4/2018 Only) * BBT051-NL *<br />
Proguard No Loop - (5/2018 to 7/2020 Only) * BBT065-NL *<br />
Proguard Single Loop Kit - (2015 to 4/2018 Only) * BB051-SL *<br />
Proguard Single Loop Kit - (5/2018 to 7/2020 Only) * BB065-SL *<br />
Proguard Triple Loop Kit - (2015 to 4/2018 Only) * BB051-TL *<br />
Proguard Triple Loop Kit - (5/2018 to 7/2020 Only) * BB065-TL *<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
* Suits wide body models only - Hi-Rider - 4x2 SR & SR5 / Dual Cab 4x4 - Workmate, SR & SR5 / Extra Cab 4x4 - Workmate, SR & SR5<br />
STEEL SIDE STEPS AND RAILS - DUAL CAB MODELS ONLY<br />
Side Steps - Dimple Step Design<br />
SS051-D<br />
Side Rails<br />
SS051 RAIL<br />
Side Steps and Rails - Dimple Step Design<br />
SSR051-D<br />
TOWING<br />
Class 4 Towbar - Compatible with Factory Rear Bumper<br />
TB051<br />
Rear Protection Towbar - Full Rear Bumper Replacement* - With Side Tubes<br />
RTB051-SP<br />
Rear Protection Towbar Plates (Pair)<br />
RTBPLATE001<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL051<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP051<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW051<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
2.8L Turbo Diesel ISNORKEL051<br />
LONG RANGE FUEL TANK<br />
135L* - 2.8L Diesel 4WD TANK051<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP051<br />
300 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Revo<br />
2015 to 4/2018<br />
(Facelift) 5/2018 to 7/2020<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Toyota Hilux<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
J DECK<br />
Super White (040)<br />
CANOPY017-SW<br />
ABS Canopy Rack Feet<br />
IRRFEETABS14<br />
• See Page 38 for 1.4m Roof Rack options and pricing.<br />
CANOPY - PINNACLE SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
A DECK<br />
Super White (040)<br />
CANFIBRE051-SW<br />
Silver Metallic / Silver Sky (1D6)<br />
CANFIBRE051-SM<br />
Attitude Black (218)<br />
CANFIBRE051-AB<br />
Dark Grey (1G3)<br />
CANFIBRE051-DG<br />
• Fits A Deck 4x4 and 4x2 Dual Cab models<br />
CANOPY - PINNACLE 2 SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
A DECK<br />
Pre-Primed<br />
ICANOPY051-P<br />
Super White (040)<br />
ICANOPY051-SW<br />
Silver Metallic / Silver Sky (1D6)<br />
ICANOPY051-SM<br />
Attitude Black (218)<br />
ICANOPY051-AB<br />
Dark Grey (1G3)<br />
ICANOPY051-DG<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control*<br />
ISLIDEAWAY051-E<br />
Electric with Remote Control - J Deck<br />
ISLIDEAWAY051JD-E<br />
Manual Operation*<br />
ISLIDEAWAY051-M<br />
Manual Operation - J Deck<br />
ISLIDEAWAY051JD-M<br />
Sports Bar Adaptor<br />
ISLIDEAWAY051-SBA<br />
* Suits A Deck models only<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR065PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
IFR065C2K<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Suits Dual Cab)<br />
IFF6051<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT051-RHD-2ROW<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC065-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC065-CC-2R-A<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD051<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
301
SUSPENSION TO SUIT<br />
Toyota Hilux<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HILUX - 2015-7/2020<br />
FRONT SUSPENSION<br />
Revo<br />
2015 to 4/2018<br />
(Facelift) 5/2018 to 7/2020<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12730GR 2<br />
Foam Cell Strut - Performance 24730FE 2<br />
Foam Cell Pro Strut - Performance 45730FE 2<br />
• Operating clearance to sway bar can be increased by installing1210K offset sway bar bracket<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 50kg TOY055A 1<br />
Light 20mm 0 - 50kg TOY055B 1<br />
Light 45mm 0 - 50kg TOY065A 1<br />
Medium 30mm 0 - 50kg TOY055C 1<br />
Medium - with Accessories 45mm 0 - 50kg TOY065B 1<br />
Heavy 45mm 50 - 110kg TOY065C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SWAY BAR<br />
33mm Sway Bar ISB80F 1<br />
Offset Sway Bar Bracket 1210K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12081GRC 2<br />
Nitro Gas - Performance 12081GR 2<br />
Foam Cell - Comfort 24081FEC 2<br />
Foam Cell - Performance 24081FE 2<br />
Foam Cell - Professional 24081FEP 2<br />
Foam Cell Pro - Comfort 45081FEC 2<br />
Foam Cell Pro - Performance 45081FE 2<br />
Foam Cell Pro - Professional 45081FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 -100kg TOY077A 2<br />
Medium 45mm 0 -200kg TOY077B 2<br />
Heavy 45mm 200 - 400kg TOY077C 2<br />
Extra Heavy 45mm 400kg - GVM TOY077D 2<br />
• New spring pins 387-1 may be required, as OEM orientation may require cutting for removal<br />
U-BOLTS<br />
U-Bolt Kit 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 767UK 1<br />
SPACER KIT<br />
Centre Bearing Spacer Kit 1192K 1<br />
Headlight Adjustment Leaf Spring Bracket (SR5 Only) 1213K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1155 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
302 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Revo<br />
2015 to 4/2018<br />
(Facelift) 5/2018 to 7/2020<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Toyota Hilux<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
TOY077AKG<br />
TOY077AKF<br />
TOY077AKP<br />
TOY077BKG<br />
TOY077BKF<br />
TOY077BKP<br />
TOY077CKG<br />
TOY077CKF<br />
TOY077CKP<br />
TOY077DKG<br />
TOY077DKF<br />
TOY077DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Non-Greasable Pins<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes Offset Sway Bar Bracket (Pro Kits Only)<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 410<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
303
ACCESSORIES TO SUIT<br />
Toyota Hilux<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
Vigo<br />
3/2005 to 9/2011<br />
(Facelift) 10/2011 to 2015<br />
ACCESSORIES TO SUIT TOYOTA HILUX - 3/2005-2015<br />
STEEL WINCH BULL BARS<br />
Commercial - (3/2005 to 9/2011 Only)<br />
BBC002<br />
Commercial - (10/2011 to 2015 Only)<br />
BBC033<br />
Commercial Deluxe - (3/2005 to 9/2011 Only)<br />
BBCD002<br />
Commercial Deluxe - (10/2011 to 2015 Only)<br />
BBCD033<br />
STEEL SIDE STEPS AND RAILS - DUAL CAB MODELS ONLY<br />
Side Steps - Dimple Step Design<br />
SS033-D<br />
Side Steps and Rails - Dimple Step Design<br />
SSR033-D<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP033<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW024<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
3L D4D TDi / 4L Petrol V6<br />
ISNORKEL001<br />
LONG RANGE FUEL TANK<br />
145L* - Diesel and Petrol 4WD only TANK002<br />
* Usable volume may differ to the stated tank capacity<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP033<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
IUP001K<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Dual Cab Only) - 1530mm Length<br />
IFR033PAK<br />
Crossbar (x 2) and Fit Kit (Dual Cab) - 1250mm Width<br />
IFR033C2K<br />
FENDER FLARE KITS<br />
Matte Black Smooth Finish 6” (Dual Cab Only)<br />
IFF6002<br />
• Some flares may not be compatible if side rails/brush bars are fitted. Some flares may require slight trimming if snorkel is installed.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
304 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Toyota Hilux<br />
Vigo<br />
3/2005 to 9/2011<br />
(Facelift) 10/2011 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HILUX - 3/2005-2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
• Foam Cell Pro, must fit 1198K spacer for Sway Bar clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY055A 1<br />
Medium 45mm 0 - 50kg TOY055B 1<br />
Heavy 45mm 50 - 110kg TOY055C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Nitro Gas Extra Long - Comfort 12081GRC 2<br />
Nitro Gas Extra Long - Performance 12081GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell Extra Long - Comfort 24081FEC 2<br />
Foam Cell Extra Long - Performance 24081FE 2<br />
Foam Cell Extra Long - Professional 24081FEP 2<br />
Foam Cell Pro - Comfort 45650FEC 2<br />
Foam Cell Pro - Performance 45650FE 2<br />
Foam Cell Pro Extra Long - Comfort 45081FEC 2<br />
Foam Cell Pro Extra Long - Performance 45081FE 2<br />
Foam Cell Pro Extra Long - Professional 45081FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 45mm 0 -100kg TOY057A 2<br />
Medium 45mm 0 -200kg TOY057B 2<br />
Heavy 45mm 200 - 400kg TOY057C 2<br />
Extra Heavy 45mm 400kg - GVM TOY057D 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
U-Bolt Kit Extra long Suits TOY057A and TOY057D Spring 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 767UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-3 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION TO SUIT<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
305
SUSPENSION TO SUIT<br />
Toyota Hilux<br />
Vigo<br />
3/2005 to 9/2011<br />
(Facelift) 10/2011 to 2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
TOY057AKG<br />
TOY057AKF<br />
TOY057AKP<br />
TOY057BKG<br />
TOY057BKF<br />
TOY057BKP<br />
TOY057CKG<br />
TOY057CKF<br />
TOY057CKP<br />
TOY057DKG<br />
TOY057DKF<br />
TOY057DKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 411<br />
UPGRADE<br />
306 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Low Ride 2WD<br />
2005+<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Hilux<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HILUX - 2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance Left Hand Side 12764GRLH 1<br />
Nitro Gas Strut - Performance Right Hand Side 12764GRRH 1<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 40mm 0 -50kg TOY067B 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
10mm Strut Trim Packer Nitro Gas HILFR10 2<br />
15mm Strut Trim Packer Nitro Gas HILFR15 2<br />
• Only compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell - Professional 24650FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 -200kg TOY068B 2<br />
Heavy 45mm 200 - 400kg TOY068C 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit (14mm Front Bolt) 767UK 1<br />
Bush Kit (23mm Front Pin with Side Plate) 1151UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386-3 2<br />
Non-Greasable Pin 387-1 2<br />
• 14mm Pin<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
• Specify Leaf Springs front bush I/D before ordering<br />
TOY068BKG<br />
TOY068CKG<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
307
ACCESSORIES AND SUSPENSION TO SUIT<br />
Toyota Hilux<br />
Tiger 107, 108, 110, 111, 167<br />
1997 to 2004<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA HILUX - 1997-2004<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe - (2001 to 2004 Only)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
Wing Kit - 1300mm (SR-SR5)*<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD001<br />
ITD1300<br />
ISD1300<br />
ITDW023<br />
IDIFFBRE<br />
SUSPENSION TO SUIT TOYOTA HILUX - 1997-2004<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12088GR 2<br />
Foam Cell - Performance 24088FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars TOY026 1<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
STEERING DAMPER<br />
Foam Cell 3533 1<br />
• Check clearance to engine sump when fitting steering damper<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12081GRC 2<br />
Nitro Gas - Performance 12081GR 2<br />
Foam Cell - Comfort 24081FEC 2<br />
Foam Cell - Performance 24081FE 2<br />
Foam Cell - Professional 24081FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 -100kg TOY027A 2<br />
Medium 40mm 0 -200kg TOY027B 2<br />
Heavy 40mm 200kg - GVM TOY027C 2<br />
• 1300mm Leaf Length<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
U-Bolt Kit Extra long Suits TOY027A Spring 437UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 758UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Stepped Shackle 386-1 2<br />
Non-Greasable Pin 387-1 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY027AKG<br />
TOY027AKF<br />
TOY027BKG<br />
TOY027BKF<br />
TOY027CKG<br />
TOY027CKF<br />
Shock Absorbers Torsion Bars Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
308 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Solid Front Axle<br />
11/1983 to 11/1997<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Hilux<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HILUX - 11/1983-11/1997<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12639GRC 2<br />
Nitro Gas - Performance 12639GR 2<br />
Foam Cell - Performance 24639FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side (Petrol) 50mm 0 - 50kg TOY010BD/S 1<br />
Medium - Near Side (Petrol) 50mm 0 - 50kg TOY010BN/S 1<br />
Heavy - Drivers Side (Diesel) 50mm 0 - 100kg TOY010CD/S 1<br />
Heavy - Near Side (Diesel) 50mm 0 - 100kg TOY010CN/S 1<br />
• Check clearance to drag link / u-bolt, ADL106 may be required<br />
STEERING DAMPER<br />
Foam Cell 3521 1<br />
U-BOLTS<br />
Drivers Side U-Bolt Kit 678UBK 1<br />
Near Side U-Bolt Kit 437UBK 1<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 732UK 1<br />
STEERING ARMS<br />
Drop Drag Link ADL106 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 384 2<br />
Greasable Pin 385 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell - Professional 24650FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -300kg TOY011B 2<br />
Heavy 50mm 300kg - GVM TOY011C 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 733UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386 2<br />
Greasable Shackle Extended 5mm 386-2 2<br />
Greasable Pin 385 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Leaf Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY010BKG2<br />
TOY010BKF2<br />
TOY010CKG2<br />
TOY010CKF2<br />
Shock Absorbers<br />
Leaf Springs<br />
U-Bolts<br />
Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
309
SUSPENSION TO SUIT<br />
Toyota Hilux<br />
Solid Front Axle<br />
1979 to 10/1983<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA HILUX - 1979-10/1983<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12639GRC 2<br />
Nitro Gas - Performance 12639GR 2<br />
Foam Cell - Performance 24639FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side (Petrol) 50mm 0 - 50kg TOY010BD/S 1<br />
Medium - Near Side (Petrol) 50mm 0 - 50kg TOY010BN/S 1<br />
Heavy - Drivers Side (Diesel) 50mm 0 - 100kg TOY010CD/S 1<br />
Heavy - Near Side (Diesel) 50mm 0 - 100kg TOY010CN/S 1<br />
• Check clearance to drag link / u-bolt, ADL106 may be required<br />
STEERING DAMPER<br />
Foam Cell 3521 1<br />
U-BOLTS<br />
Drivers Side U-Bolt Kit 678UBK 1<br />
Near Side U-Bolt Kit 437UBK 1<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 732UK 1<br />
STEERING ARMS<br />
Drop Drag Link ADL106 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 384 2<br />
Greasable Pin 385 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -300kg TOY011B 2<br />
Heavy 50mm 300kg - GVM TOY011C 2<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 733UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 386 2<br />
Greasable Shackle Extended 5mm 386-2 2<br />
Greasable Pin 385 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP2 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Leaf Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY010BKG1<br />
TOY010BKF1<br />
TOY010CKG1<br />
TOY010CKF1<br />
Shock Absorbers<br />
Leaf Springs<br />
U-Bolts<br />
Polyurethane Spring Bushes<br />
310 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
Kluger / Highlander<br />
2020+<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Kluger<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA KLUGER / HIGHLANDER - 2020+<br />
REAR SUSPENSION<br />
COIL SPRINGS Est. Lift Additional Load<br />
Heavy 40mm 200kg TOY076C 1<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
311
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
300 Series<br />
2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 300 SERIES - 2022+<br />
STEEL WINCH BULL BARS<br />
Commercial<br />
Commercial Deluxe<br />
Premium - 60.3mm Tube<br />
Raid Full Length Steel Tubular Bumper<br />
Raid Full Length Steel Tubular Bumper - Pre-Primed for Colour Coding<br />
Polyurethane Overrider Kit to Suit BBR090 Raid Bar<br />
Driving Light/Lightbar Patch Loom<br />
Camera Extension Cable - Suits BBR090* and BBP090*<br />
Parking Sensor (4) Extension Harness - Suits BBR090 and BBP090<br />
Bull Bar Multi-Function Harness - For Blinker/Parker/DRL only<br />
*Required if vehicle is fitted with front camera<br />
BBC090<br />
BBCD090<br />
BBP090<br />
BBR090<br />
BBR090P<br />
BBPART045<br />
IPLS090<br />
IBBCLE090<br />
IBBPSL090<br />
IBBPL090<br />
• Winch with Steel Cable and Roller Fairlead is not suitable when front camera is used - Use Winch with Synthetic Rope and Alloy Hawse only<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS<br />
120W Bright Sabre Single Row Lightbar 812mm (32”) Straight ILBSR002BW 1<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80B 2<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BA 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Clear ILED80BF 2<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm (Each) - Amber ILED80BFA 2<br />
STEEL SIDE STEPS<br />
Premium Side Steps - 60.3mm Tube - Dimple Step Design*<br />
SSP090-D<br />
Premium Side Steps and Rails - 60.3mm Tube - Dimple Step Design*<br />
SSRP090-D<br />
*Not compatible with ZX Sahara fitted with factory body kit<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP090<br />
SNORKEL<br />
Landcruiser 300 Series<br />
ISNORKEL090<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP090<br />
ATLAS ROOF RACK KITS<br />
Platform A with Blade Fit Kit - 1530mm Length<br />
IFR090PAK<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
IFR090PEK<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
SEAT COVER<br />
Airbag Compatible Fabric Seat Covers - Front<br />
SC090-CC-1R-A<br />
Airbag Compatible Fabric Seat Covers - Rear<br />
SC090-CC-2R-A<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
312 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 300 SERIES - 2022+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Strut - Performance* 24883FE 2<br />
Foam Cell Pro Strut - Performance 45883FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 25mm 0 - 50kg TOY083A 1<br />
Medium 50mm 0 - 50kg TOY083B 1<br />
Heavy 50mm 50 - 110kg TOY083C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST090 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Foam Cell HILFR05F 2<br />
10mm Strut Trim Packer Foam Cell HILFR10F 2<br />
15mm Strut Trim Packer Foam Cell HILFR15F 2<br />
• Only compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA090FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell - Performance 24884FE 2<br />
Foam Cell Pro - Performance 45884FE 2<br />
Foam Cell Pro - Professional 45884FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 25mm 0 - 200kg TOY084A 1<br />
Medium 50mm 0 - 200kg TOY084B 1<br />
Medium (with Accessories) 50mm 200 - 400kg TOY084B1 1<br />
Heavy 50mm 400 - 800kg TOY084C 1<br />
Extra Heavy 50mm 800kg+ TOY084D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD016 1<br />
ADJUSTABLE TRAILING ARM<br />
Lower Trailing Arm LTA003 2<br />
SPRING SEAT SUPPORT KIT<br />
Forged Aluminium Support Kit 1227K 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
300 Series<br />
2022+<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
TOY083BKF<br />
TOY083BKP<br />
TOY083CKF<br />
TOY083CKP<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 412<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
313
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
200 Series (Facelift Mk II)<br />
11/2015+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 200 SERIES - 11/2015+<br />
STEEL WINCH BULL BARS<br />
Premium - 60.3mm Tube<br />
BBP056-VX<br />
Proguard No Loop<br />
BBT056VX-NL<br />
Proguard Single Loop Kit<br />
BB056-SL<br />
Proguard Triple Loop Kit<br />
BB056-TL<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL056<br />
• Winch with Steel Cable and Roller Fairlead is not suitable when front camera is used - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Premium Side Steps - 60.3mm Tube (Suit non KDSS model)<br />
SSP056<br />
Premium Side Rails - 60.3mm Tube (Suit non KDSS model)<br />
SSP056 RAIL<br />
Premium Side Steps and Rails - 60.3mm Tube (Suit non KDSS model)<br />
SSRP056<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair) (Suit KDSS and non KDSS model)<br />
IRP056<br />
SNORKEL<br />
Landcruiser 200 Series<br />
ISNORKEL056<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
ITD1000<br />
Single Drawer - 1000mm<br />
ISD1000<br />
Wing Kit - 1000mm (May impede access to rear 240V outlet)<br />
ITDW020<br />
BATTERY TRAY<br />
Suits 12” Battery<br />
IBTRAY056<br />
ATLAS ROOF RACK KITS<br />
Platform A with Blade Fit Kit - 1530mm Length<br />
IFR056PAK<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
IFR056PEK<br />
Crossbar (x 3) and Fit Kit - 1375mm Width<br />
IFR056C3K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
IRRCAGE18<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
IRRTENT18<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
IRRTRADE18<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
IRRCAGE18-ALLOY<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
IRRTRADE18-ALLOY<br />
Flat Rack - 1.8m x 1.25m<br />
IRRTFLAT18-ALLOY<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Landcruiser 200 Mount Feet - 200mm (8 Feet)<br />
IRRFEETLC200<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine and Radiator<br />
UBP056<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
314 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
200 Series (Facelift Mk II)<br />
11/2015+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 200 SERIES - 11/2015+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12720GR 2<br />
Foam Cell Strut - Performance 24720FE 2<br />
Foam Cell Pro Strut - Performance 45720FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0-50kg TOY063S 1<br />
Light 25mm 0 - 50kg TOY063A 1<br />
Medium 50mm 0 - 50kg TOY063B 1<br />
Heavy 50mm 50 - 110kg TOY063C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST004 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• Only compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
SWAY BAR<br />
38mm Sway Bar Non KDSS Models Only ISB200F 1<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA056FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12796GR 2<br />
Foam Cell - Performance 24796FE 2<br />
Foam Cell Pro - Performance 45796FE 2<br />
Foam Cell Pro - Professional 45796FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 200kg TOY064S 1<br />
Light 25mm 0 - 200kg TOY064A 1<br />
Medium 50mm 0 - 300kg TOY064B 1<br />
Medium - with Accessories 50mm 100 - 400kg TOY064EA 1<br />
Heavy 50mm 400 - 800kg TOY064C 1<br />
Extra Heavy 50mm 800kg+ TOY064D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD016 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA200 2<br />
Lower Trailing Arm LTA200 2<br />
SWAY BAR<br />
33mm Sway Bar Non KDSS Models Only ISB200R 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• All kits compatible with KDSS, refer KDSS instructions available at www.ironman4x4.com<br />
TOY063AKG<br />
TOY063AKF<br />
TOY063AKP<br />
TOY063BKG<br />
TOY063BKF<br />
TOY063BKP<br />
TOY063CKG<br />
TOY063CKF<br />
TOY063CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 413<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
315
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
200 Series<br />
11/2007 to 1/2012<br />
(Facelift) 2/2012 to 10/2015<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 200 SERIES - 11/2007-10/2015<br />
STEEL WINCH BULL BARS<br />
Premium - 60.3mm Tube - (11/2007 to 1/2012)<br />
Premium - 60.3mm Tube - (2/2012 to 9/2015)<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair) - KDSS and non KDSS models<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm (May impede access to rear 240V outlet)<br />
SNORKEL<br />
Landcruiser 200 Series<br />
ATLAS ROOF RACK KITS<br />
Platform A with Blade Fit Kit - 1530mm Length<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
Crossbar (x 3) and Fit Kit - 1375mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
ROOF RACK - MOUNTING KITS<br />
Landcruiser 200 Mount Feet - 200mm (8 Feet)<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine and Radiator<br />
UNDERBODY PROTECTION<br />
Engine Bay and Transmission - While Stocks Last<br />
Fuel Tank - While Stocks Last<br />
• Fuel tank protection plates are not compatible with long range fuel tanks.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBP025<br />
BBP043<br />
IRP056<br />
ITD1000<br />
ISD1000<br />
ITDW020<br />
ISNORKEL010<br />
IFR056PAK<br />
IFR056PEK<br />
IFR056C3K<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEETLC200<br />
UBP056<br />
IUP004K<br />
IUP004F<br />
IDIFFBRE<br />
316 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
200 Series<br />
11/2007 to 10/2015<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 200 SERIES - 11/2007-10/2015<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12720GR 2<br />
Foam Cell Strut - Performance 24720FE 2<br />
Foam Cell Pro Strut - Performance 45720FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0-50kg TOY063S 1<br />
Light 25mm 0 - 50kg TOY063A 1<br />
Medium 50mm 0 - 50kg TOY063B 1<br />
Heavy 50mm 50 - 110kg TOY063C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST004 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
SWAY BAR<br />
38mm Sway Bar Non KDSS Models Only ISB200F 1<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA056FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12796GR 2<br />
Foam Cell - Performance 24796FE 2<br />
Foam Cell Pro - Performance 45796FE 2<br />
Foam Cell Pro - Professional 45796FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Standard 0mm 0 - 200kg TOY064S 1<br />
Light 25mm 0 - 200kg TOY064A 1<br />
Medium 50mm 0 - 300kg TOY064B 1<br />
Medium - with Accessories 50mm 100 - 400kg TOY064EA 1<br />
Heavy 50mm 400kg - GVM TOY064C 1<br />
Extra Heavy 50mm 800kg+ TOY064D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD016 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA200 2<br />
Lower Trailing Arm LTA200 2<br />
SWAY BAR<br />
33mm Sway Bar Non KDSS Models Only ISB200R 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• All kits compatible with KDSS, refer KDSS instructions available at www.ironman4x4.com<br />
TOY063AKG<br />
TOY063AKF<br />
TOY063AKP<br />
TOY063BKG<br />
TOY063BKF<br />
TOY063BKP<br />
TOY063CKG<br />
TOY063CKF<br />
TOY063CKP<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
317
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
105 Series HZJ105, FZJ105<br />
Live Axle Front Suspension<br />
3/1998 to 10/2007<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 105 SERIES - 3/1990-10/2007<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm (GXL 1998 to 2005)<br />
SNORKEL<br />
Landcruiser 105 Series<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Landcruiser 100 Mount Feet - 100mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD005<br />
IRP005<br />
ITD1000<br />
ISD1000<br />
ITDW018<br />
ISNORKEL003<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEETLC100<br />
IDIFFBRE<br />
318 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
105 Series<br />
1998+<br />
Product Description Part No. Qty<br />
Req<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 105 SERIES - 1998+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12683GR 2<br />
Foam Cell - Performance 24683FE 2<br />
Foam Cell - Performance Suits 4” Lift 24683LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24683LFE1 2<br />
Foam Cell Pro - Performance 45683FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45683LFE 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45683LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg TOY024B 1<br />
Medium - 4” Lift 100mm 0 - 100kg TOY012C 1<br />
Medium - 6” Lift 150mm 0 - 100kg TOY060B 1<br />
Heavy 50mm 50 - 110kg TOY024C 1<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5º - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE001 1<br />
4º Drop Box DBOX001 1<br />
STEERING RODS<br />
Adjustable Drag Link Right Hand Drive ADL001 1<br />
Adjustable Drag Link Left Hand Drive ADL001L 1<br />
Track Rod ATR001 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod PANHARD001 1<br />
Left Hand Drive Rod PANHARD007 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 20mm LCF20 2<br />
Polyurethane 30mm LCF30 2<br />
EXTENDED BRAKE HOSE<br />
Single Hose Models BHOSE001 1<br />
Dual Hose Models BHOSE002 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12682GR 2<br />
Foam Cell - Performance 24682FE 2<br />
Foam Cell - Performance Suits 4” Lift 24682LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24682LFE1 2<br />
Foam Cell Pro - Performance 45682FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45682LFE 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45682LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -200kg TOY025B 1<br />
Medium - with Accessories 50mm 100 -300kg TOY013B 1<br />
Medium - 4” Lift 100mm 0 - 300kg TOY013C 1<br />
Medium - 6” Lift 150mm 0 - 300kg TOY061B 1<br />
Heavy 50mm 200 - 400kg TOY025C 1<br />
Heavy - 4” Lift 100mm 300 - 500kg TOY013D 1<br />
Heavy - 6” Lift 150mm 300 - 500kg TOY061C 1<br />
Extra Heavy 55mm 400 - 500kg TOY025D 1<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
319
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
105 Series<br />
1998+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD002 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA001 2<br />
Lower Trailing Arm LTA001 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Side mount SBEXT002 2<br />
Extended Sway Bar Link Under mount SBEXT005 2<br />
COIL SPACER<br />
Polyurethane 15mm LCR15 2<br />
Polyurethane 30mm LCR30 2<br />
BRAKE HOSE<br />
Extended Brake Hose BHOSE002 1<br />
BUSH KIT<br />
Rubber Suspension Arm Bush Kit W/ Standard Radius Arm Bushes 847RK 1<br />
Rubber Suspension Arm Bush Kit W/ Offset Radius Arm Bushes 847CRK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
TOY024BKG<br />
Medium - Foam Cell<br />
TOY024BKF<br />
Medium - Foam Cell 4”Lift RH Drive TOY012CKF1<br />
Medium - Foam Cell 4”Lift LH Drive TOY012CKF1L<br />
Medium - Foam Cell 6”Lift RH Drive TOY063BKF1<br />
Medium - Foam Cell 6”Lift LH Drive TOY063BKF1L<br />
Medium - Foam Cell Pro<br />
TOY024BKP<br />
Medium - Foam Cell Pro 4”Lift RH Drive TOY012CKP1<br />
Medium - Foam Cell Pro 4”Lift LH Drive TOY012CKP1L<br />
Medium - Foam Cell Pro 6”Lift RH Drive TOY063BKP1<br />
Medium - Foam Cell Pro 6”Lift LH Drive TOY063BKP1L<br />
Heavy - Nitro Gas<br />
TOY024CKG<br />
Heavy - Foam Cell<br />
TOY024CKF<br />
Heavy - Foam Cell 4”Lift RH Drive TOY012CKF2<br />
Heavy - Foam Cell 4”Lift LH Drive TOY012CKF2L<br />
Heavy - Foam Cell 6”Lift RH Drive TOY063BKF2<br />
Heavy - Foam Cell 6”Lift LH Drive TOY063BKF2L<br />
Heavy - Foam Cell Pro<br />
TOY024CKP<br />
Heavy - Foam Cell Pro 4”Lift RH Drive TOY012CKP2<br />
Heavy - Foam Cell Pro 4”Lift LH Drive TOY012CKP2L<br />
Heavy - Foam Cell Pro 6”Lift RH Drive TOY063BKP2<br />
Heavy - Foam Cell Pro 6”Lift LH Drive TOY063BKP2L<br />
Extra Heavy - Nitro Gas<br />
TOY024DKG<br />
Extra Heavy - Foam Cell<br />
TOY024DKF<br />
Extra Heavy - Foam Cell Pro<br />
TOY024DKP<br />
• 4” and 6” lifts may not be legal for on-road use in your area, certification may be required for on-road use<br />
• Due to the extreme nature of 4” and 6” lifts, further modifications may be required, and will vary between vehicles, such modifications are entirely the owners responsibility<br />
• Ironman 4x4 accept no responsibility for any damage or injury caused by use of the these products<br />
50MM SUSPENSION KIT CONTENTS<br />
4” AND 6” SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Shock Absorbers Caster Plates<br />
Coil Springs<br />
Brake Hoses<br />
Panhard Rods<br />
Adjustable Trailing Arms<br />
Sway Bar Links<br />
320 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
100 Series HDJ100, UZJ100, IFS<br />
3/1998 to 10/2007<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 100 SERIES - 3/1998-10/2007<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm (GXL 1998 to 2005)<br />
Wing Kit - 1000mm (2005+)<br />
Wing Kit - 1000mm (DX)<br />
SNORKEL<br />
Landcruiser 100 / Lexus LX 470<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Landcruiser 100 Mount Feet - 100mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD006<br />
IRP005<br />
ITD1000<br />
ISD1000<br />
ITDW018<br />
ITDW019<br />
ITDW017<br />
ISNORKEL003<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEETLC100<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
321
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
100 Series, IFS<br />
1998+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 100 SERIES - 1998+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12795GR 2<br />
Foam Cell - Performance 24795FE 2<br />
Foam Cell Pro - Performance 45795FE 2<br />
TORSION BAR<br />
Uprated Torsion Bars Petrol Models 1160mm Length TOY050 1<br />
Uprated Torsion Bars Diesel Models 1210mm Length TOY051 1<br />
• Must Install BRACKET100<br />
• Some Middle Eastern Petrol models use TOY051 check length before ordering<br />
• Minimum 60mm downward suspension travel required after adjustment<br />
DIFF DROP KIT<br />
Diff Drop Kit IDD100 1<br />
CONTROL ARM<br />
Control Arm Reinforcement BRACKET100 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12796GR 2<br />
Foam Cell - Performance 24796FE 2<br />
Foam Cell Pro - Performance 45796FE 2<br />
Foam Cell Pro - Professional 45796FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 25mm 0 - 200kg TOY013B 1<br />
Heavy 25mm 200 - 400kg TOY025C 1<br />
Extra Heavy 30mm 400kg - GVM TOY025D 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA003 2<br />
Lower Trailing Arm LTA003 2<br />
SUSPENSION KIT<br />
Medium - Nitro Gas Petrol TOY050BKG<br />
Medium - Nitro Gas Diesel TOY051BKG<br />
Medium - Foam Cell Petrol TOY050BKF<br />
Medium - Foam Cell Diesel TOY051BKF<br />
Medium - Foam Cell Pro Petrol TOY050BKP<br />
Medium - Foam Cell Pro Diesel TOY051BKP<br />
Heavy - Nitro Gas Petrol TOY050CKG<br />
Heavy - Nitro Gas Diesel TOY051CKG<br />
Heavy - Foam Cell Petrol TOY050CKF<br />
Heavy - Foam Cell Diesel TOY051CKF<br />
Heavy - Foam Cell Pro Petrol TOY050CKP<br />
Heavy - Foam Cell Pro Diesel TOY051CKP<br />
Extra Heavy - Nitro Gas Petrol TOY050DKG<br />
Extra Heavy - Nitro Gas Diesel TOY051DKG<br />
Extra Heavy - Foam Cell Petrol TOY050DKF<br />
Extra Heavy - Foam Cell Diesel TOY051DKF<br />
Extra Heavy - Foam Cell Pro Petrol TOY050DKP<br />
Extra Heavy - Foam Cell Pro Diesel TOY051DKP<br />
• Some Middle Eastern Petrol models use TOY051 check Torsion Bar length before ordering<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers<br />
Coil Springs<br />
Torsion Bars<br />
Control Arm Reinforcement<br />
322 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
80 Series HZJ80, FZJ80<br />
1990 to 1998<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 80 SERIES - 1990-1998<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm (GXL)<br />
Wing Kit - 1000mm (DX)<br />
SNORKEL<br />
Landcruiser / Lexus LX 450<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD004<br />
IRP005<br />
ITD1000<br />
ISD1000<br />
ITDW016<br />
ITDW015<br />
ISNORKEL004<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET125<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
323
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
80 Series<br />
1990+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 80 SERIES - 1990+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12683GR 2<br />
Foam Cell - Performance 24683FE 2<br />
Foam Cell - Performance Suits 4” Lift 24683LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24683LFE1 2<br />
Foam Cell Pro - Performance 45683FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45683LFE 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45683LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg TOY024B 1<br />
Medium - 4” Lift 100mm 0 - 100kg TOY012C 1<br />
Medium - 6” Lift 150mm 0 - 100kg TOY060B 1<br />
Heavy 50mm 50 - 110kg TOY024C 1<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5º - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
5° Offset Plate Kit CPLATE001 1<br />
4º Drop Box DBOX001 1<br />
STEERING ROD<br />
Adjustable Drag Link Right Hand Drive ADL001 1<br />
Adjustable Drag Link Left Hand Drive ADL001L 1<br />
Track Rod ATR001 1<br />
ADJUSTABLE PANHARD ROD<br />
Right Hand Drive Rod PANHARD001 1<br />
Left Hand Drive Rod PANHARD007 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 20mm LCF20 2<br />
Polyurethane 30mm LCF30 2<br />
EXTENDED BRAKE HOSE<br />
Single Hose Models BHOSE001 1<br />
Dual Hose Models BHOSE002 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12682GR 2<br />
Foam Cell - Performance 24682FE 2<br />
Foam Cell - Performance Suits 4” Lift 24682LFE 2<br />
Foam Cell - Performance Suits 6” Lift 24682LFE1 2<br />
Foam Cell Pro - Performance 45682FE 2<br />
Foam Cell Pro - Performance Suits 4” Lift 45682LFE 2<br />
Foam Cell Pro - Performance Suits 6” Lift 45682LFE1 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -200kg TOY025B 1<br />
Medium - with Accessories 50mm 100 -300kg TOY013B 1<br />
Medium - 4” Lift 100mm 0 - 300kg TOY013C 1<br />
Medium - 6” Lift 150mm 0 - 300kg TOY061B 1<br />
Heavy 50mm 200 - 400kg TOY025C 1<br />
Heavy - 4” Lift 100mm 300 - 500kg TOY013D 1<br />
Heavy - 6” Lift 150mm 300 - 500kg TOY061C 1<br />
Extra Heavy 55mm 400 - 500kg TOY025D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD002 1<br />
ADJUSTABLE TRAILING ARM<br />
Upper Trailing Arm UTA001 2<br />
Lower Trailing Arm LTA001 2<br />
324 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
80 Series<br />
1990+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SWAY BAR LINK<br />
Extended Sway Bar Link Side Mount SBEXT002 2<br />
Extended Sway Bar Link Under Mount SBEXT005 2<br />
COIL SPACER<br />
Polyurethane 15mm LCR15 2<br />
Polyurethane 30mm LCR30 2<br />
BUSH KIT<br />
Rubber Suspension Arm Bush Kit W/ Standard Radius Arm Bushes 847RK 1<br />
Rubber Suspension Arm Bush Kit W/ Offset Radius Arm Bushes 847CRK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
TOY024BKG<br />
Medium - Foam Cell<br />
TOY024BKF<br />
Medium - Foam Cell 4”Lift RH Drive TOY012CKF1<br />
Medium - Foam Cell 4”Lift LH Drive TOY012CKF1L<br />
Medium - Foam Cell 6”Lift RH Drive TOY063BKF1<br />
Medium - Foam Cell 6”Lift LH Drive TOY063BKF1L<br />
Medium - Foam Cell Pro<br />
TOY024BKP<br />
Medium - Foam Cell Pro 4”Lift RH Drive TOY012CKP1<br />
Medium - Foam Cell Pro 4”Lift LH Drive TOY012CKP1L<br />
Medium - Foam Cell Pro 6”Lift RH Drive TOY063BKP1<br />
Medium - Foam Cell Pro 6”Lift LH Drive TOY063BKP1L<br />
Heavy - Nitro Gas<br />
TOY024CKG<br />
Heavy - Foam Cell<br />
TOY024CKF<br />
Heavy - Foam Cell 4”Lift RH Drive TOY012CKF2<br />
Heavy - Foam Cell 4”Lift LH Drive TOY012CKF2L<br />
Heavy - Foam Cell 6”Lift RH Drive TOY063BKF2<br />
Heavy - Foam Cell 6”Lift LH Drive TOY063BKF2L<br />
Heavy - Foam Cell Pro<br />
TOY024CKP<br />
Heavy - Foam Cell Pro 4”Lift RH Drive TOY012CKP2<br />
Heavy - Foam Cell Pro 4”Lift LH Drive TOY012CKP2L<br />
Heavy - Foam Cell Pro 6”Lift RH Drive TOY063BKP2<br />
Heavy - Foam Cell Pro 6”Lift LH Drive TOY063BKP2L<br />
Extra Heavy - Nitro Gas<br />
TOY024DKG<br />
Extra Heavy - Foam Cell<br />
TOY024DKF<br />
Extra Heavy - Foam Cell Pro<br />
TOY024DKP<br />
• 4” and 6” lifts may not be legal for on-road use in your area, certification may be required for on-road use<br />
• Due to the extreme nature of 4” and 6” lifts, further modifications may be required, and will vary between vehicles, such modifications are entirely the owners responsibility<br />
• Ironman 4x4 accept no responsibility for any damage or injury caused by use of the these products<br />
50MM SUSPENSION KIT CONTENTS<br />
4” AND 6” SUSPENSION KIT CONTENTS<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Shock Absorbers Coil Springs Shock Absorbers Caster Plates<br />
Coil Springs<br />
Brake Hoses<br />
Panhard Rods<br />
Adjustable Trailing Arms<br />
Sway Bar Links<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
325
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 79 SERIES SINGLE CAB - 1999+<br />
STEEL WINCH BULL BARS (NO SIDE PLATES ON BAR)<br />
Commercial - (9/2016+ Only)<br />
Commercial - (2007 to 8/2016 Only)<br />
Commercial Deluxe - (1999 to 2007 Only)<br />
Premium - 60.3mm Tube - (9/2016+ Only)<br />
Premium - 60.3mm Tube - (2007 to 8/2016 Only)<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps - (9/2016+ Only)<br />
Side Steps - (2007 to 8/2016 Only) - Dimple Step Design<br />
Side Rails - (9/2016+ Only)<br />
Side Steps and Rails - (9/2016+ Only)<br />
Side Steps and Rails - (2007 to 8/2016 Only) - Dimple Step Design<br />
Premium Side Steps - 60.3mm Tube - (9/2016+ Only)<br />
Premium Side Rails - 60.3mm Tube - (9/2016+ Only)<br />
Premium Side Steps and Rails - 60.3mm Tube - (9/2016+ Only)<br />
Premium Side Steps and Rails - 60.3mm Tube - (2007 to 8/2016 Only)<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair) - (9/2016+ Only)<br />
Recovery Points - 5000kg Rating (Pair) - (2007 to 8/2016 Only)<br />
SNORKEL<br />
Landcruiser 79 Series V8 - (2007+ Only)<br />
Landcruiser 4.2L 1HZ Diesel - (1999 to 2007 Only)<br />
PREMIUM UNDERBODY PROTECTION<br />
Radiator and Steering Rods - (9/2016+ Only)<br />
Radiator and Steering Rods - (2007 to 8/2016 Only)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
79 Series (V8 TD) Single Cab<br />
9/2016+<br />
2007 to 8/2016<br />
1999 to 2007<br />
BBC019SC<br />
BBC019E<br />
BBCD018<br />
BBP019SC<br />
BBP019E<br />
SS019SC<br />
SS016-D<br />
SS019SC RAIL<br />
SSR019SC<br />
SSR016-D<br />
SSP019SC<br />
SSP019SC RAIL<br />
SSRP019SC<br />
SSRP016<br />
IRP019SC<br />
IRP019<br />
ISNORKEL023<br />
ISNORKEL009<br />
UBP019SC<br />
UBP019<br />
IDIFFBRE<br />
326 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
79 Series (V8 TD) Single Cab<br />
9/2016+<br />
2007 to 8/2016<br />
1999 to 2007<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 79 SERIES SINGLE CAB - 1999+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY046A 1<br />
Medium 50mm 0 - 50kg TOY046B 1<br />
Heavy 50mm 50 - 110kg TOY046C 1<br />
Medium - 4” Lift 100mm 0 - 50kg TOY079B 1<br />
STEERING DAMPER<br />
Foam Cell 1999-2006 3524 1<br />
Foam Cell 2007+ 3525 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5 Degree - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
STEERING RODS<br />
Adjustable Drag Link 2007+ Wide Body Model Only ADL070 1<br />
Adjustable Track Rod 2007+ Wide Body Model Only ATR070 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod 2007+ RHD Only PANHARD013 1<br />
Adjustable Panhard Rod 2007+ LHD Only PANHARD013L 1<br />
SWAY BAR<br />
33mm Sway Bar Narrow Body 1999-2007 ISB789F 1<br />
33mm Sway Bar Petrol Engines 2007+ ISB789FWP 1<br />
33mm Sway Bar Diesel Engines 2007+ ISB789FW 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 30mm LC70F30 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12094GRC 2<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Comfort 24094FEC 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Extra Long - Comfort 24094LFEC 2<br />
Foam Cell - Extra Long - Performance 24094LFE 2<br />
Foam Cell - Extra Long - Professional 24094LFEP 2<br />
Foam Cell Pro - Comfort 45094FEC 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Extra Long - Comfort 45094LFEC 2<br />
Foam Cell Pro - Extra Long - Performance 45094LFE 2<br />
Foam Cell Pro - Extra Long - Professional 45094LFEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 150kg TOY047A 2<br />
Medium 50mm 0 - 250kg TOY047B 2<br />
Heavy 50mm 250 - 400kg TOY047C 2<br />
Extra Heavy 50mm 400kg - 600kg TOY047D 2<br />
Super Heavy 50mm 600kg - GVM TOY047E 2<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
327
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
79 Series (V8 TD) Single Cab<br />
9/2016+<br />
2007 to 8/2016<br />
1999 to 2007<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
U-Bolt Kit Extra Long Suit TOY047D and TOY047E Spring 416UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1085UK 1<br />
SWAY BAR<br />
30mm Sway Bar (Includes Mounting Brackets) 2007+ Only ISB789RW 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1141 2<br />
Greasable Pin 1142 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs Drum Brake Models Only LP9 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
Super Heavy - Foam Cell<br />
Super Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY046AKG1<br />
TOY046AKF1<br />
TOY046AKP1<br />
TOY046BKG1<br />
TOY046BKF1<br />
TOY046BKP1<br />
TOY046CKG1<br />
TOY046CKF1<br />
TOY046CKP1<br />
TOY046DKG1<br />
TOY046DKF1<br />
TOY046DKP1<br />
TOY046EKF1<br />
TOY046EKP1<br />
Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Coil Springs<br />
U-Bolts<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 414<br />
UPGRADE<br />
328 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
79 Series Dual Cab<br />
11/2012+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 79 SERIES DUAL CAB - 11/2012+<br />
STEEL WINCH BULL BARS (NO SIDE PLATES ON BAR)<br />
Commercial<br />
Premium - 60.3mm Tube<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps - Dimple Step Design<br />
Side Steps and Rails - Dimple Step Design<br />
Premium Side Steps and Rails - 60.3mm Tube*<br />
*May require the fitment of spacers under gearbox cross-member mount<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
SNORKEL<br />
Landcruiser 79 Series V8<br />
PREMIUM UNDERBODY PROTECTION<br />
Radiator and Steering Rods<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform S with Blade Fit Kit (Dual Cab Only) - 1390mm Length<br />
Crossbar (x 2) and Fit Kit - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBC019E<br />
BBP019E<br />
BBR019<br />
SS019-D<br />
SSR019-D<br />
SSRP019<br />
IRP019<br />
ISNORKEL023<br />
UBP019<br />
IFR019PSK<br />
IFR019C2K<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET125<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
329
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
79 Series Dual Cab<br />
2013+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 79 SERIES DUAL CAB - 2013+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY046A 1<br />
Medium 50mm 0 - 50kg TOY046B 1<br />
Medium - 4” Lift 100mm 0 - 50kg TOY079B 1<br />
Heavy 50mm 50 - 110kg TOY046C 1<br />
STEERING DAMPER<br />
Foam Cell 3525 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5 Degree - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
STEERING RODS<br />
Adjustable Drag Link 2007+ Wide Body Model Only ADL070 1<br />
Adjustable Track Rod 2007+ Wide Body Model Only ATR070 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod RHD Only PANHARD013 1<br />
Adjustable Panhard Rod 2007+ LHD Only PANHARD013L 1<br />
SWAY BAR<br />
33mm Sway Bar Petrol Engines ISB789FWP 1<br />
33mm Sway Bar Diesel Engines ISB789FW 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 30mm LC70F30 2<br />
330 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
79 Series Dual Cab<br />
2013+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12094GRC 2<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Comfort 24094FEC 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Extra Long - Comfort 24094LFEC 2<br />
Foam Cell - Extra Long - Performance 24094LFE 2<br />
Foam Cell - Extra Long - Professional 24094LFEP 2<br />
Foam Cell Pro - Comfort 45094FEC 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Extra Long - Comfort 45094LFEC 2<br />
Foam Cell Pro - Extra Long - Performance 45094LFE 2<br />
Foam Cell Pro - Extra Long - Professional 45094LFEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 250kg TOY047B 2<br />
Medium 50mm 0 - 300kg TOY047C 2<br />
Heavy 50mm 300kg - 500kg TOY047D 2<br />
Extra Heavy 50mm 500kg - GVM TOY047E 2<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
U-Bolt Kit Extra Long Suit TOY047D and TOY047E Spring 416UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1085UK 1<br />
SWAY BAR<br />
30mm Sway Bar Includes Mounting Brackets ISB789RW 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1141 2<br />
Greasable Pin 1142 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs Drum Brake Models Only LP9 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY046BKG1<br />
TOY046BKF1<br />
TOY046BKP1<br />
TOY046CKG1<br />
TOY046CKF1<br />
TOY046CKP1<br />
TOY046DKG1<br />
TOY046DKF1<br />
TOY046DKP1<br />
TOY046EKF1<br />
TOY046EKP1<br />
Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Coil Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 415<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
331
Product Description Part No. Qty<br />
Req<br />
You have entered Cruiser country!<br />
for a full range of accessories visit our website<br />
www.ironman4x4.com<br />
Family Owned Australian Company<br />
Since 1958
78 Series Troop Carrier<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 78 SERIES - 2007+<br />
STEEL WINCH BULL BARS (NO SIDE PLATES ON BAR)<br />
Commercial<br />
Premium - 60.3mm Tube<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
SWING ARM REAR BARS<br />
Rear Swing Arm Bar<br />
Rear Swing Arm Wheel Carrier - RHS<br />
Rear Swing Arm Jerry Carrier - RHS<br />
Rear Swing Arm Wheel Carrier - LHS<br />
Rear Swing Arm Jerry Carrier - LHS<br />
Rear Swing Arm Bar Hi Lift Jack Adaptor<br />
Rear Door Bag Set<br />
Map Console<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
Wing Kit - 1300mm (GXL 2008+)<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
SNORKEL<br />
Landcruiser 78 Series V8 2007+<br />
PREMIUM UNDERBODY PROTECTION<br />
Radiator and Steering Rods<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 210mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBC019E<br />
BBP019E<br />
BBR019<br />
RCB019LC78<br />
RCBWHEELARM-R<br />
RCBJERRYCAN-R<br />
RCBWHEELARM-L<br />
RCBJERRYCAN-L<br />
RCBHLJADAPTER<br />
RCBREARDOORBAGS<br />
RCBMAPCONSOLE<br />
ITD1300<br />
ISD1300<br />
ITDW022<br />
IRP019<br />
ISNORKEL023<br />
UBP019<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET210<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
333
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
78 Series<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 78 SERIES - 2007+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY046A 1<br />
Medium 50mm 0 - 50kg TOY046B 1<br />
Medium - 4” Lift 100mm 0 - 50kg TOY079B 1<br />
Heavy 50mm 50 - 110kg TOY046C 1<br />
STEERING DAMPER<br />
Foam Cell 2007+ 3525 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5 Degree - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
STEERING RODS<br />
Adjustable Drag Link 2007+ Wide Body Model Only ADL070 1<br />
Adjustable Track Rod 2007+ Wide Body Model Only ATR070 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod 2007+ RHD Only PANHARD013 1<br />
Adjustable Panhard Rod 2007+ LHD Only PANHARD013L 1<br />
SWAY BAR<br />
33mm Sway Bar Narrow Body 1999-2007 ISB789F 1<br />
33mm Sway Bar Petrol Engines 2007+ ISB789FWP 1<br />
33mm Sway Bar Diesel Engines 2007+ ISB789FW 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 30mm LC70F30 2<br />
334 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
78 Series<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12094GRC 2<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Comfort 24094FEC 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Extra Long - Comfort 24094LFEC 2<br />
Foam Cell - Extra Long - Performance 24094LFE 2<br />
Foam Cell - Extra Long - Professional 24094LFEP 2<br />
Foam Cell Pro - Comfort 45094FEC 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Extra Long - Comfort 45094LFEC 2<br />
Foam Cell Pro - Extra Long - Performance 45094LFE 2<br />
Foam Cell Pro - Extra Long - Professional 45094LFEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 150kg TOY047A 2<br />
Medium 50mm 0 - 250kg TOY047B 2<br />
Heavy 50mm 250 - 400kg TOY047C 2<br />
Extra Heavy 50mm 400kg - 600kg TOY047D 2<br />
Super Heavy 50mm 600kg - GVM TOY047E 2<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
U-Bolt Kit Extra Long Suit TOY047D and TOY047E Spring 416UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1084UK 1<br />
SWAY BAR<br />
30mm Sway Bar (Includes Mounting Brackets) 2007+ Only ISB789RW 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1141 2<br />
Greasable Pin 1142 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs Drum Brake Models Only LP9 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
Super Heavy - Foam Cell<br />
Super Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY046AKG<br />
TOY046AKF<br />
TOY046AKP<br />
TOY046BKG<br />
TOY046BKF<br />
TOY046BKP<br />
TOY046CKG<br />
TOY046CKF<br />
TOY046CKP<br />
TOY046DKG<br />
TOY046DKF<br />
TOY046DKP<br />
TOY046EKF<br />
TOY046EKP<br />
Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Coil Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
OPTIONS AVAILABLE FOR THIS VEHICLE - SEE PAGE 416<br />
UPGRADE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
335
Product Description Part No. Qty<br />
Req<br />
Urban Assault
78 Series<br />
1999 to 2007<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 78 SERIES - 1999-2007<br />
STEEL WINCH BULL BARS (NO SIDE PLATES ON BAR)<br />
Commercial Deluxe<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm Troop Carrier LC78<br />
Single Drawer - 1300mm<br />
SNORKEL<br />
Landcruiser 4.2L 1HZ Diesel<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 210mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD018<br />
ITD1300<br />
ISD1300<br />
ISNORKEL009<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET210<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
337
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
78 Series<br />
1999 to 2007<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 78 SERIES - 1999-2007<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY046A 1<br />
Medium 50mm 0 - 50kg TOY046B 1<br />
Medium - 4” Lift 100mm 0 - 50kg TOY079B 1<br />
Heavy 50mm 50 - 110kg TOY046C 1<br />
STEERING DAMPER<br />
Foam Cell 1999-2006 3524 1<br />
Foam Cell 2007+ 3525 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5 Degree - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod 2007+ RHD Only PANHARD013 1<br />
Adjustable Panhard Rod 2007+ LHD Only PANHARD013L 1<br />
SWAY BAR<br />
33mm Sway Bar Narrow Body 1999-2007 ISB789F 1<br />
33mm Sway Bar Petrol Engines 2007+ ISB789FWP 1<br />
33mm Sway Bar Diesel Engines 2007+ ISB789FW 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 30mm LC70F30 2<br />
338 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
78 Series<br />
1999 to 2007<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12094GRC 2<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Comfort 24094FEC 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Extra Long - Comfort 24094LFEC 2<br />
Foam Cell - Extra Long - Performance 24094LFE 2<br />
Foam Cell - Extra Long - Professional 24094LFEP 2<br />
Foam Cell Pro - Comfort 45094FEC 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Extra Long - Comfort 45094LFEC 2<br />
Foam Cell Pro - Extra Long - Performance 45094LFE 2<br />
Foam Cell Pro - Extra Long - Professional 45094LFEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 150kg TOY047A 2<br />
Medium 50mm 0 - 250kg TOY047B 2<br />
Heavy 50mm 250 - 400kg TOY047C 2<br />
Extra Heavy 50mm 400kg - 600kg TOY047D 2<br />
Super Heavy 50mm 600kg - GVM TOY047E 2<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
U-Bolt Kit Extra Long Suit TOY047D and TOY047E Spring 416UBKL 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1084UK 1<br />
SWAY BAR<br />
30mm Sway Bar (Includes Mounting Brackets) 2007+ Only ISB789RW 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1141 2<br />
Greasable Pin 1142 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs Drum Brake Models Only LP9 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
Super Heavy - Foam Cell<br />
Super Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY046AKG<br />
TOY046AKF<br />
TOY046AKP<br />
TOY046BKG<br />
TOY046BKF<br />
TOY046BKP<br />
TOY046CKG<br />
TOY046CKF<br />
TOY046CKP<br />
TOY046DKG<br />
TOY046DKF<br />
TOY046DKP<br />
TOY046EKF<br />
TOY046EKP<br />
Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Coil Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
339
Product Description Part No. Qty<br />
Req<br />
Built for adventure!<br />
for a full range of alu-cab products visit our website<br />
www.ironman4x4.com<br />
distributed by
76 Series<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 76 SERIES - 2007+<br />
STEEL WINCH BULL BARS (NO SIDE PLATES ON BAR)<br />
Commercial<br />
BBC019E<br />
Premium - 60.3mm Tube<br />
BBP019E<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
BBR019<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS015<br />
Side Steps and Rails<br />
SSR015<br />
Premium Side Steps and Rails - 60.3mm Tube<br />
SSRP015<br />
SWING ARM REAR BARS<br />
Rear Swing Arm Bar<br />
RCB019LC76<br />
Rear Swing Arm Wheel Carrier - RHS<br />
RCBWHEELARM-R<br />
Rear Swing Arm Jerry Carrier - RHS<br />
RCBJERRYCAN-R<br />
Rear Swing Arm Wheel Carrier - LHS<br />
RCBWHEELARM-L<br />
Rear Swing Arm Jerry Carrier - LHS<br />
RCBJERRYCAN-L<br />
Rear Swing Arm Bar Hi Lift Jack Adaptor<br />
RCBHLJADAPTER<br />
Rear Door Bag Set<br />
RCBREARDOORBAGS<br />
Cargo Barrier<br />
RCBCARGOBARRIER<br />
Map Console<br />
RCBMAPCONSOLE<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 900mm<br />
ITD900<br />
Single Drawer - 900mm<br />
ISD900<br />
Wing Kit - 900mm (76 Series GXL)<br />
ITDW009<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
IRP019<br />
SNORKEL<br />
Landcruiser V8 2007+<br />
ISNORKEL023<br />
*Does not suit vehicle with DPF<br />
PREMIUM UNDERBODY PROTECTION<br />
Radiator and Steering Rods<br />
UBP019<br />
LONG RANGE FUEL TANK<br />
160L* Diesel - 76 Series up to 11/2012 only TANK001<br />
* Usable volume may differ to the stated tank capacity<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
IRRCAGE14<br />
Cage Style - 1.8m x 1.25m<br />
IRRCAGE18<br />
Cage Style - 2.2m x 1.25m<br />
IRRCAGE22<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
IRRTENT18<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
IRRTENT22<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
IRRTRADE18<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
IRRTRADE22<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
IRRCAGE14-ALLOY<br />
Cage Style - 1.8m x 1.25m<br />
IRRCAGE18-ALLOY<br />
Cage Style - 2.2m x 1.25m<br />
IRRCAGE22-ALLOY<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
IRRTRADE18-ALLOY<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
IRRTRADE22-ALLOY<br />
Flat Rack - 1.8m x 1.25m<br />
IRRTFLAT18-ALLOY<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
IRRFEET125<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
341
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
76 Series<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 76 SERIES - 2007+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY046A 1<br />
Medium 50mm 0 - 50kg TOY046B 1<br />
Medium - 4” Lift 100mm 0 - 50kg TOY079B 1<br />
Heavy 50mm 50 - 110kg TOY046C 1<br />
STEERING DAMPER<br />
Foam Cell 3525 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5 Degree - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod RHD Only PANHARD013 1<br />
Adjustable Panhard Rod 2007+ LHD Only PANHARD013L 1<br />
SWAY BAR<br />
33mm Sway Bar Petrol Engines ISB789FWP 1<br />
33mm Sway Bar Diesel Engines ISB789FW 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 30mm LC70F30 2<br />
342 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
76 Series<br />
2007+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12094GRC 2<br />
Nitro Gas - Performance 12094GR 2<br />
Foam Cell - Comfort 24094FEC 2<br />
Foam Cell - Performance 24094FE 2<br />
Foam Cell - Professional 24094FEP 2<br />
Foam Cell - Extra Long - Comfort 24094LFEC 2<br />
Foam Cell - Extra Long - Performance 24094LFE 2<br />
Foam Cell - Extra Long - Professional 24094LFEP 2<br />
Foam Cell Pro - Comfort 45094FEC 2<br />
Foam Cell Pro - Performance 45094FE 2<br />
Foam Cell Pro - Professional 45094FEP 2<br />
Foam Cell Pro - Extra Long - Comfort 45094LFEC 2<br />
Foam Cell Pro - Extra Long - Performance 45094LFE 2<br />
Foam Cell Pro - Extra Long - Professional 45094LFEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 300kg TOY062B 2<br />
Heavy 50mm 300 - 600kg TOY062C 2<br />
Extra Heavy 50mm 600kg - GVM TOY062D 2<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1085UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1141-1 2<br />
Greasable Shackle Extended 20mm 1141 2<br />
Greasable Pin 1142 2<br />
SWAY BAR<br />
30mm Sway Bar Includes Mounting Brackets ISB789RW 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY062BKG<br />
TOY062BKF<br />
TOY062BKP<br />
TOY062CKG<br />
TOY062CKF<br />
TOY062CKP<br />
TOY062DKG<br />
TOY062DKF<br />
TOY062DKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs<br />
U-Bolts<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
343
ACCESSORIES TO SUIT<br />
Toyota Landcruiser<br />
75 Series<br />
1984 to 1999<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 75 SERIES - 1984-1999<br />
STEEL WINCH BULL BARS (NO SIDE PLATES ON BAR)<br />
Commercial Deluxe<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
Single Drawer - 1300mm<br />
SNORKEL<br />
Landcruiser 4.2L 1HZ Diesel<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD018<br />
ITD1300<br />
ISD1300<br />
ISNORKEL009<br />
IDIFFBRE<br />
344 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
75 Series<br />
1984 to 1999<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 75 SERIES - 1984-1999<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12637GRC 2<br />
Nitro Gas - Performance 12637GR 2<br />
Foam Cell - Comfort 24637FEC 2<br />
Foam Cell - Performance 24637FE 2<br />
Foam Cell Pro - Comfort 45637FEC 2<br />
Foam Cell Pro - Performance 45637FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg TOY008B 2<br />
Heavy 50mm 50 - 100kg TOY008C 2<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
U-BOLTS<br />
U-Bolt Kit 436UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 348LH 1<br />
Greasable Shackle Right Hand Side 348RH 1<br />
Greasable Pin 351 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12081GRC 2<br />
Nitro Gas - Performance 12081GR 2<br />
Foam Cell - Comfort 24081FEC 2<br />
Foam Cell - Performance 24081FE 2<br />
Foam Cell - Professional 24081FEP 2<br />
Foam Cell Pro - Comfort 45081FEC 2<br />
Foam Cell Pro - Performance 45081FE 2<br />
Foam Cell Pro - Professional 45081FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 200kg TOY009B 2<br />
Heavy 50mm 200 - 400kg TOY009C 2<br />
Extra Heavy 50mm 400 - 600kg TOY009D 2<br />
Super Heavy 50mm 600kg - GVM TOY009E 2<br />
U-BOLTS<br />
U-Bolt Kit 416UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 720UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 354 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs Drum Brake Models Only LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
Extra Heavy - Nitro Gas<br />
Extra Heavy - Foam Cell<br />
Extra Heavy - Foam Cell Pro<br />
Super Heavy - Nitro Gas<br />
Super Heavy - Foam Cell<br />
Super Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY008BKG<br />
TOY008BKF<br />
TOY008BKP<br />
TOY008CKG<br />
TOY008CKF<br />
TOY008CKP<br />
TOY009DKG<br />
TOY009DKF<br />
TOY009DKP<br />
TOY009EKG<br />
TOY009EKF<br />
TOY009EKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
345
SUSPENSION TO SUIT<br />
Toyota Landcruiser II<br />
Prado 70, 73, 78 Series<br />
1990 to 1996<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER II - 1990-1996<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12696GR 2<br />
Foam Cell - Performance 24696FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg TOY048B 1<br />
Heavy 50mm 50 - 100kg TOY048C 1<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12697GR 2<br />
Foam Cell - Performance 24697FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - MWB 50mm 0 - 150kg TOY049B 1<br />
Heavy - LWB 50mm 150 - 300kg TOY049C 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY048BKG<br />
TOY048BKF<br />
TOY048CKG<br />
TOY048CKF<br />
Shock Absorbers<br />
Coil Springs<br />
346 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1984 to 1989<br />
Toyota Bundera<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA BUNDERA - 1984-1989<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg TOY018B 1<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance Left Hand Side 12639GRS 1<br />
Nitro Gas - Performance Right Hand Side 12650GR 1<br />
Foam Cell - Performance Left Hand Side 24639FES 1<br />
Foam Cell - Performance Right Hand Side 24650FE 1<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 200kg TOY019B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
TOY018BKG<br />
TOY018BKF<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
347
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
71 Series (Coil/Leaf)<br />
1999+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 71 SERIES - 1999+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12091GR 2<br />
Foam Cell - Performance 24091FE 2<br />
Foam Cell Pro - Performance 45091FE 2<br />
Foam Cell Pro - Professional 45091FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 50kg TOY046A 1<br />
Medium 50mm 0 - 50kg TOY046B 1<br />
Heavy 50mm 50 - 110kg TOY046C 1<br />
STEERING DAMPER<br />
Foam Cell 3525 1<br />
CASTER CORRECTION<br />
2° Offset Bush Kit - Polyurethane 1144SK 1<br />
Adjustable Offset STD, 2.5, 3.5 Degree - Polyurethane 1144 1<br />
2° Offset Bush Kit - Rubber 1144RK 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link SBEXT001 2<br />
COIL SPACER<br />
Polyurethane 30mm LC70F30 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12081GRC 2<br />
Nitro Gas - Performance 12081GR 2<br />
Foam Cell - Comfort 24081FEC 2<br />
Foam Cell - Performance 24081FE 2<br />
Foam Cell - Professional 24081FEP 2<br />
Foam Cell Pro - Comfort 45081FEC 2<br />
Foam Cell Pro - Performance 45081FE 2<br />
Foam Cell Pro - Professional 45081FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 -150kg TOY007AD/S 2<br />
Medium 50mm 0 -250kg TOY007BD/S 2<br />
Heavy 50mm 250kg - GVM TOY007CD/S 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1185UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1141-1 2<br />
Greasable Shackle Extra long 1141 2<br />
Greasable Pin 1142 2<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY058AKG<br />
TOY058AKF<br />
TOY058AKP<br />
TOY058BKG<br />
TOY058BKF<br />
TOY058BKP<br />
TOY058CKG<br />
TOY058CKF<br />
TOY058CKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Leaf Springs<br />
348 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
70, 73, 74 Series (Leaf/Leaf)<br />
1984 to 1988<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 70, 73, 74 SERIES - 1984-1988<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12637GRC 2<br />
Nitro Gas - Performance 12637GR 2<br />
Foam Cell - Comfort 24637FEC 2<br />
Foam Cell - Performance 24637FE 2<br />
Foam Cell Pro - Comfort 45637FEC 2<br />
Foam Cell Pro - Performance 45637FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 100kg TOY008B 2<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
U-BOLTS<br />
U-Bolt Kit 436UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 348LH 1<br />
Greasable Shackle Right Hand Side 348RH 1<br />
Greasable Pin 351 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell - Professional 24650FEP 2<br />
Foam Cell Pro - Comfort 45650FEC 2<br />
Foam Cell Pro - Performance 45650FE 2<br />
Foam Cell Pro - Professional 45650FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 50mm 0 - 200kg TOY007AN/S 2<br />
Medium 50mm 0 - 200kg TOY007BN/S 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 354 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas<br />
Light - Foam Cell<br />
Light - Foam Cell Pro<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY016AKG<br />
TOY016AKF<br />
TOY016AKP<br />
TOY016BKG<br />
TOY016BKF<br />
TOY016BKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
349
ACCESSORIES AND SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
60 Series<br />
11/1980 to 11/1989<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA LANDCRUISER 60 SERIES - 11/1980-11/1989<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1000mm<br />
Single Drawer - 1000mm<br />
Wing Kit - 1000mm<br />
STEEL ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 2.2m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.4m x 1.25m<br />
Cage Style - 1.8m x 1.25m<br />
Cage Style - 2.2m x 1.25m<br />
Trade Style - 1.4m x 1.25m (Open end)<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Trade Style - 2.2m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ITD1000<br />
ISD1000<br />
ITDW013<br />
IRRCAGE14<br />
IRRCAGE18<br />
IRRCAGE22<br />
IRRTENT18<br />
IRRTENT22<br />
IRRTRADE18<br />
IRRTRADE22<br />
IRRCAGE14-ALLOY<br />
IRRCAGE18-ALLOY<br />
IRRCAGE22-ALLOY<br />
IRROPEN14-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTRADE22-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEET125<br />
IDIFFBRE<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 60 SERIES - 11/1980-11/1989<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12637GRC 2<br />
Nitro Gas - Performance 12637GR 2<br />
Foam Cell - Comfort 24637FEC 2<br />
Foam Cell - Performance 24637FE 2<br />
Foam Cell Pro - Comfort 45637FEC 2<br />
Foam Cell Pro - Performance 45637FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Petrol 50mm 0 - 80kg TOY006B 2<br />
Diesel or Bullbar 50mm 50 - 100kg TOY006C 2<br />
Turbo Diesel 50mm 50 - 100kg TOY006D 2<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
U-BOLTS<br />
U-Bolt Kit 436UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 348LH 1<br />
Greasable Shackle Right Hand Side 348RH 1<br />
Greasable Pin 351 2<br />
350 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
60 Series<br />
1986+<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12650GRC 2<br />
Nitro Gas - Performance 12650GR 2<br />
Foam Cell - Comfort 24650FEC 2<br />
Foam Cell - Performance 24650FE 2<br />
Foam Cell - Professional 24650FEP 2<br />
Foam Cell Pro - Comfort 45650FEC 2<br />
Foam Cell Pro - Performance 45650FE 2<br />
Foam Cell Pro - Professional 45650FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light - Drivers Side 50mm 0 - 200kg TOY007AD/S 1<br />
Light - Near Side 50mm 0 - 200kg TOY007AN/S 1<br />
Medium - Drivers Side 50mm 0 - 200kg TOY007BD/S 1<br />
Medium - Near Side 50mm 0 - 200kg TOY007BN/S 1<br />
Heavy - Drivers Side 50mm 200kg - GVM TOY007CD/S 1<br />
Heavy - Near Side 50mm 200kg - GVM TOY007CN/S 1<br />
• Side hinge barn door models may require (D/S-D/S) or (N/S-N/S) rear spring configuration to maintain level<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 351 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Light - Nitro Gas Petrol TOY006AKG3<br />
Light - Foam Cell Petrol TOY006AKF3<br />
Light - Foam Cell Pro Petrol TOY006AKP3<br />
Light - Nitro Gas Diesel TOY006AKG2<br />
Light - Foam Cell Diesel TOY006AKF2<br />
Light - Foam Cell Pro Diesel TOY006AKP2<br />
Medium - Nitro Gas Petrol TOY006BKG2<br />
Medium - Foam Cell Petrol TOY006BKF2<br />
Medium - Foam Cell Pro Petrol TOY006BKP2<br />
Medium - Nitro Gas Diesel TOY006CKG2<br />
Medium - Foam Cell Diesel TOY006CKF2<br />
Medium - Foam Cell Pro Diesel TOY006CKP2<br />
Heavy - Nitro Gas Petrol TOY007BKG2<br />
Heavy - Foam Cell Petrol TOY007BKF2<br />
Heavy - Foam Cell Pro Petrol TOY007BKP2<br />
Heavy - Nitro Gas Diesel TOY007CKG2<br />
Heavy - Foam Cell Diesel TOY007CKF2<br />
Heavy - Foam Cell Pro Diesel TOY007CKP2<br />
SUSPENSION KIT CONTENTS<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
351
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
60 Series<br />
Pre 1986<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 60 SERIES - PRE 1986<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12637GRC 2<br />
Nitro Gas - Performance 12637GR 2<br />
Foam Cell - Comfort 24637FEC 2<br />
Foam Cell - Performance 24637FE 2<br />
Foam Cell Pro - Comfort 45637FEC 2<br />
Foam Cell Pro - Performance 45637FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Petrol 50mm 0 - 80kg TOY006B 2<br />
Diesel or Bullbar 50mm 50 - 100kg TOY006C 2<br />
Turbo Diesel 50mm 50 - 100kg TOY006D 2<br />
STEERING DAMPER<br />
Foam Cell 3524 1<br />
U-BOLTS<br />
U-Bolt Kit 436UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 348LH 1<br />
Greasable Shackle Right Hand Side 348RH 1<br />
Greasable Pin 351 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light - Drivers Side 50mm 0 - 200kg TOY007AD/S 1<br />
Light - Near Side 50mm 0 - 200kg TOY007AN/S 1<br />
Medium - Drivers Side 50mm 0 - 200kg TOY007BD/S 1<br />
Medium - Near Side 50mm 0 - 200kg TOY007BN/S 1<br />
Heavy - Drivers Side 50mm 200kg - GVM TOY007CD/S 1<br />
Heavy - Near Side 50mm 200kg - GVM TOY007CN/S 1<br />
• Side hinge barn door models may require (D/S-D/S) or (N/S-N/S) rear spring configuration to maintain level<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 351 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
352 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT<br />
60 Series<br />
Pre 1986<br />
Light - Nitro Gas Petrol TOY006AKG<br />
Light - Nitro Gas Diesel TOY006AKG1<br />
Light - Foam Cell Petrol TOY006AKF<br />
Light - Foam Cell Diesel TOY006AKF1<br />
Light - Foam Cell Pro Petrol TOY006AKP<br />
Light - Foam Cell Pro Diesel TOY006AKP1<br />
Medium - Nitro Gas Petrol TOY006BKG1<br />
Medium - Nitro Gas Diesel TOY006CKG1<br />
Medium - Foam Cell Petrol TOY006BKF1<br />
Medium - Foam Cell Diesel TOY006CKF1<br />
Medium - Foam Cell Pro Petrol TOY006BKP1<br />
Medium - Foam Cell Pro Diesel TOY006CKP1<br />
Heavy - Nitro Gas Petrol TOY007BKG1<br />
Heavy - Nitro Gas Diesel TOY007CKG1<br />
Heavy - Foam Cell Petrol TOY007BKF1<br />
Heavy - Foam Cell Diesel TOY007CKF1<br />
Heavy - Foam Cell Pro Petrol TOY007BKP1<br />
Heavy - Foam Cell Pro Diesel TOY007CKP1<br />
SUSPENSION KIT CONTENTS<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
353
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
45, 47 Series<br />
8/1980 to 1985<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 45, 47 SERIES - 8/1980-1985<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12635GRC 2<br />
Nitro Gas - Performance 12635GR 2<br />
Foam Cell - Comfort 24635FEC 2<br />
Foam Cell - Performance 24635FE 2<br />
Foam Cell Pro - Performance 45635FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 80kg TOY004B 2<br />
Heavy 50mm 80 - 120kg TOY004C 2<br />
STEERING DAMPER<br />
Foam Cell 3523 1<br />
U-BOLTS<br />
U-Bolt Kit Drivers Side 449UBK 1<br />
U-Bolt Kit Near Side 415UBK 1<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 348LH 1<br />
Greasable Shackle 348RH 1<br />
Greasable Pin 351 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 400kg TOY005C 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 353LH 1<br />
Greasable Shackle Right Hand Side 353RH 1<br />
Greasable Pin 351 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY005BKG<br />
TOY005BKF<br />
TOY005BKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
354 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
45 Series<br />
1960 to 1980<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 45 SERIES - 1960-1980<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12635GRC 2<br />
Nitro Gas - Performance 12635GR 2<br />
Foam Cell - Comfort 24635FEC 2<br />
Foam Cell - Performance 24635FE 2<br />
Foam Cell Pro - Performance 45635FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 100kg TOY001B 2<br />
STEERING DAMPER<br />
Foam Cell 3523 1<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 713UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 343LH 1<br />
Greasable Shackle Right Hand Side 343RH 1<br />
Greasable Pin 346 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Heavy 50mm 0 - 400kg TOY003C 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 714UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 344 1<br />
Greasable Shackle Right Hand Side 345 1<br />
Greasable Pin 347 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY003BKG<br />
TOY003BKF<br />
TOY003BKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
355
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
40, 42, 46 Series<br />
1980 to 1984<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 40, 42, 46 SERIES - 1980-1984<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12635GRC 2<br />
Nitro Gas - Performance 12635GR 2<br />
Foam Cell - Comfort 24635FEC 2<br />
Foam Cell - Performance 24635FE 2<br />
Foam Cell Pro - Performance 45635FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 80kg TOY004B 2<br />
Heavy 50mm 80 - 120kg TOY004C 2<br />
STEERING DAMPER<br />
Foam Cell 3523 1<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 348LH 1<br />
Greasable Shackle Right Hand Side 348RH 1<br />
Greasable Pin 351 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Heavy 50mm 0 - 200kg TOY034B 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 719UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 348RH 1<br />
Greasable Shackle Right Hand Side 348LH 1<br />
Greasable Pin 351 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT - Specify Front Leaf Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY004BKG<br />
TOY004BKF<br />
TOY004BKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
356 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
40 Series<br />
1960 to 1980<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT<br />
Toyota Landcruiser<br />
SUSPENSION TO SUIT TOYOTA LANDCRUISER 40 SERIES - 1960-1980<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12635GRC 2<br />
Nitro Gas - Performance 12635GR 2<br />
Foam Cell - Comfort 24635FEC 2<br />
Foam Cell - Performance 24635FE 2<br />
Foam Cell Pro - Performance 45635FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 100kg TOY001B 2<br />
STEERING DAMPER<br />
Foam Cell 3523 1<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 713UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 343LH 1<br />
Greasable Shackle Right Hand Side 343RH 1<br />
Greasable Pin 346 2<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12636GRC 2<br />
Nitro Gas - Performance 12636GR 2<br />
Nitro Gas - Professional 12636GRP 2<br />
Foam Cell - Comfort 24636FEC 2<br />
Foam Cell - Performance 24636FE 2<br />
Foam Cell - Professional 24636FEP 2<br />
Foam Cell Pro - Comfort 45636FEC 2<br />
Foam Cell Pro - Performance 45636FE 2<br />
Foam Cell Pro - Professional 45636FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 200kg TOY002B 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 713UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle Left Hand Side 343RH 1<br />
Greasable Shackle Right Hand Side 343LH 1<br />
Greasable Pin 346 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY001BKG<br />
TOY001BKF<br />
TOY001BKP<br />
Shock Absorbers Leaf Springs U-Bolts Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
357
ACCESSORIES TO SUIT<br />
Toyota Prado<br />
150 Series (Facelift)<br />
11/2017+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA PRADO 150 - 11/2017+<br />
STEEL WINCH BULL BARS<br />
Premium - 60.3mm Tube<br />
Raid Full Length Steel Bumper - Includes Integrated Recovery Points<br />
Proguard No Loop<br />
Proguard Single Loop Kit<br />
Proguard Triple Loop Kit<br />
Driving Light/Lightbar Patch Loom<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS - NOT COMPATIBLE WITH KDSS MODELS<br />
Premium Side Steps - 60.3mm Tube - Dimple Step Design<br />
Premium Side Rails - 60.3mm Tube<br />
Premium Side Steps and Rails - 60.3mm Tube<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 900mm<br />
Single Drawer - 900mm<br />
Wing Kit - 900mm<br />
Mounting Kit<br />
BATTERY TRAY<br />
Suits 12” Battery<br />
SNORKEL<br />
Engine 2.8 1GD-FTV Diesel<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission for models without KDSS<br />
ATLAS ROOF RACK KITS<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
Crossbar (x 3) and Fit Kit - 1375mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Toyota Prado 150 Mount Feet (2 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBP064<br />
BBR064<br />
BBT064-NL<br />
BB064-SL<br />
BB064-TL<br />
IPLS064<br />
SSP064-D<br />
SSP064 RAIL<br />
SSRP064-D<br />
IRP064<br />
ITD900<br />
ISD900<br />
ITDW064<br />
ITDFK064<br />
IBTRAY064<br />
ISNORKEL064<br />
UBP047<br />
IFR047PEK<br />
IFR047C3K<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEETPRADO150<br />
IDIFFBRE<br />
358 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
150 Series (Coil)<br />
12/2017+<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Prado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA PRADO 150 - 12/2017+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
• Foam Cell Pro, must fit 1198K or 1209K spacer for Sway Bar clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 45mm 0 - 50kg TOY065A 1<br />
Medium 45mm 0 - 50kg TOY065B 1<br />
Heavy 45mm 50 - 110kg TOY065C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
Offset Sway Bar Bracket 1209K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12682GRC 2<br />
Nitro Gas - Professional 12682GRP 2<br />
Foam Cell - Performance 24682FEC 2<br />
Foam Cell - Professional 24682FEP 2<br />
Foam Cell Pro - Performance 45682FEC 2<br />
Foam Cell Pro - Professional 45682FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg TOY056B 1<br />
Medium - with Accessories 50mm 200 - 400kg TOY069B 1<br />
Heavy 45mm 300kg - GVM TOY056C 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod for models without KDSS PANHARD015 1<br />
Adjustable Panhard Rod for models with KDSS PANHARD015-KDSS 1<br />
COIL SPACER<br />
Polyurethane 20mm LCPR20 2<br />
Polyurethane 25mm LCPR25 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link for models without KDSS SBEXT006 2<br />
Rear Sway Bar Spacer for models with KDSS 1220K 1<br />
BUMP STOP<br />
Internal Rubber Cone 1218R 2<br />
Airbag Delete Kit for models with Airbags 1218ADK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
• All kits compatible with KDSS, refer KDSS instructions available at www.ironman4x4.com<br />
TOY065BKG2<br />
TOY065BKF2<br />
TOY065BKP2<br />
TOY065CKG2<br />
TOY065CKF2<br />
TOY065CKP2<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs Strut Shock Absorbers Offset Sway Bar Bracket (Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
359
Product Description<br />
THIS<br />
Part No.<br />
THAT<br />
Qty<br />
Req<br />
OR<br />
PREMIUM BULL BAR<br />
TRIPLE LOOP FULL FEATURE BAR<br />
RAID BULL BAR<br />
NO LOOP INTEGRATED BAR
150 Series<br />
11/2009 to 10/2013<br />
11/2013 to 10/2017<br />
Product Description Part No. Qty<br />
Req<br />
ACCESSORIES TO SUIT<br />
Toyota Prado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA PRADO 150 - 11/2009-10/2017<br />
STEEL WINCH BULL BARS<br />
Commercial* - (11/2013 to 10/2017) - While Stocks Last<br />
Commercial Deluxe* - (11/2009 to 10/2013)<br />
Commercial Deluxe* - (11/2013 to 10/2017)<br />
* Not compatible with sensors or headlight washers.<br />
STEEL SIDE STEPS AND RAILS - NOT COMPATIBLE WITH KDSS MODELS<br />
Side Steps - Dimple Step Design<br />
Side Steps and Rails - Dimple Step Design<br />
RECOVERY POINTS - IRONMAN 4X4 BULL BAR ONLY<br />
Recovery Points - 5000kg Rating (Pair)<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 900mm<br />
Single Drawer - 900mm<br />
Wing Kit - 900mm<br />
Mounting Kit<br />
BATTERY TRAY<br />
Suits 12” Battery<br />
SNORKEL<br />
3L D4D TDi / 2.8L D4D TDi / 4L Petrol V6<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission for models without KDSS<br />
ATLAS ROOF RACK KITS<br />
Platform E with Blade Fit Kit - 2130mm Length<br />
Crossbar (x 3) and Fit Kit - 1375mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Toyota Prado 150 Mount Feet (2 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBC047<br />
BBCD029<br />
BBCD047<br />
SS047-D<br />
SSR047-D<br />
IRP064<br />
ITD900<br />
ISD900<br />
ITDW064<br />
ITDFK064<br />
IBTRAY064<br />
ISNORKEL035<br />
UBP047<br />
IFR047PEK<br />
IFR047C3K<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEETPRADO150<br />
IDIFFBRE<br />
LISTING<br />
CONTINUED<br />
OVER THE<br />
PAGE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
361
SUSPENSION TO SUIT<br />
Toyota Prado<br />
150 Series (Coil)<br />
2009 to 11/2017<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA PRADO 150 - 2009-11/2017<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12750GR 2<br />
Foam Cell Strut - Performance 24750FE 2<br />
Foam Cell Pro Strut - Performance 45750FE 2<br />
• Foam Cell Pro, must fit 1198K or 1209K spacer for Sway Bar clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 45mm 0 - 50kg TOY065A 1<br />
Medium - Petrol 45mm 0 - 50kg TOY065B 1<br />
Heavy - Diesel 45mm 50 - 110kg TOY065C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
Offset Sway Bar Bracket 1209K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12682GRC 2<br />
Nitro Gas - Professional 12682GRP 2<br />
Foam Cell - Performance 24682FEC 2<br />
Foam Cell - Professional 24682FEP 2<br />
Foam Cell Pro - Performance 45682FEC 2<br />
Foam Cell Pro - Professional 45682FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 45mm 0 - 300kg TOY056A 1<br />
Medium - LWB 45mm 0 - 300kg TOY056B 1<br />
Medium - LWB with Accessories 50mm 200 - 400kg TOY069B 1<br />
Heavy 45mm 300kg - GVM TOY056C 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod for models without KDSS PANHARD015 1<br />
Adjustable Panhard Rod for models with KDSS PANHARD015-KDSS 1<br />
COIL SPACER<br />
Polyurethane 20mm LCPR20 2<br />
Polyurethane 25mm LCPR25 2<br />
SWAY BAR LINK<br />
Extended Sway Bar Link for models without KDSS SBEXT006 2<br />
Rear Sway Bar Spacer for models with KDSS 1220K 1<br />
BUMP STOP<br />
Internal Rubber Cone 1218R 2<br />
Airbag Delete Kit for models with Airbags 1218ADK 1<br />
362 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
150 Series (Coil)<br />
2009 to 11/2017<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Prado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB Petrol TOY065AKG<br />
Medium - Nitro Gas SWB Diesel TOY065AKG1<br />
Medium - Nitro Gas LWB Petrol TOY065BKG<br />
Medium - Nitro Gas LWB Diesel TOY065BKG1<br />
Medium - Foam Cell SWB Petrol TOY065AKF<br />
Medium - Foam Cell SWB Diesel TOY065AKF1<br />
Medium - Foam Cell LWB Petrol TOY065BKF<br />
Medium - Foam Cell LWB Diesel TOY065BKF1<br />
Medium - Foam Cell Pro SWB Petrol TOY065AKP<br />
Medium - Foam Cell Pro SWB Diesel TOY065AKP1<br />
Medium - Foam Cell Pro LWB Petrol TOY065BKP<br />
Medium - Foam Cell Pro LWB Diesel TOY065BKP1<br />
Heavy - Nitro Gas LWB Petrol TOY065CKG<br />
Heavy - Nitro Gas LWB Diesel TOY065CKG1<br />
Heavy - Foam Cell LWB Petrol TOY065CKF<br />
Heavy - Foam Cell LWB Diesel TOY065CKF1<br />
Heavy - Foam Cell Pro LWB Petrol TOY065CKP<br />
Heavy - Foam Cell Pro LWB Diesel TOY065CKP1<br />
• All kits compatible with KDSS, refer KDSS instructions available at www.ironman4x4.com<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs Offset Sway Bar Bracket (Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
363
ACCESSORIES AND SUSPENSION TO SUIT<br />
Toyota Prado<br />
120 Series<br />
4/2003 to 10/2009<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA PRADO 120 - 4/2003-10/2009<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
Side Steps and Rails - Dimple Step Design<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 900mm<br />
Single Drawer - 900mm<br />
SNORKEL<br />
3L D4D TDi / 4L Petrol V6<br />
STEEL ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Rooftop Tent Compatible - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
ALLOY ROOF RACKS<br />
Cage Style - 1.8m x 1.25m<br />
Trade Style - 1.8m x 1.25m (Open end)<br />
Flat Rack - 1.8m x 1.25m<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 200mm (8 Feet)<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBCD008<br />
SS017<br />
SSR004-D<br />
ITD900<br />
ISD900<br />
ISNORKEL006<br />
IRRCAGE18<br />
IRRTENT18<br />
IRRTRADE18<br />
IRRCAGE18-ALLOY<br />
IRRTRADE18-ALLOY<br />
IRRTFLAT18-ALLOY<br />
IRRFEETLC200<br />
IDIFFBRE<br />
SUSPENSION TO SUIT TOYOTA PRADO 120 - 4/2003-10/2009<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
• Foam Cell Pro, must fit 1198K spacer for Sway Bar clearance<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 30mm 0 - 50kg TOY055A 1<br />
Medium - Petrol 45mm 0 - 50kg TOY055B 1<br />
Heavy - Diesel 45mm 50 - 110kg TOY055C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
364 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
120 Series<br />
4/2003 to 10/2009<br />
Product Description Part No. Qty<br />
Req<br />
Toyota Prado<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12682GRC 2<br />
Nitro Gas - Professional 12682GRP 2<br />
Foam Cell - Performance 24682FEC 2<br />
Foam Cell - Professional 24682FEP 2<br />
Foam Cell Pro - Performance 45682FEC 2<br />
Foam Cell Pro - Professional 45682FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 45mm 0 - 300kg TOY056A 1<br />
Medium - LWB 45mm 0 - 300kg TOY056B 1<br />
Medium - with accessories LWB 50mm 200 - 400kg TOY069B 1<br />
Heavy 45mm 300kg - GVM TOY056C 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod for models without KDSS PANHARD015 1<br />
Adjustable Panhard Rod for models with KDSS PANHARD015-KDSS 1<br />
SWAY BAR LINK<br />
Extended Sway Bar Link for models without KDSS SBEXT006 2<br />
Rear Sway Bar Spacer for models with KDSS 1220K 1<br />
BUMP STOP<br />
Internal Rubber Cone 1218R 2<br />
Airbag Delete Kit for models with Airbags 1218ADK 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB Petrol TOY055AKG<br />
Medium - Nitro Gas SWB Diesel TOY055AKG1<br />
Medium - Nitro Gas LWB Petrol TOY055BKG<br />
Medium - Nitro Gas LWB Diesel TOY055BKG1<br />
Medium - Foam Cell SWB Petrol TOY055AKF<br />
Medium - Foam Cell SWB Diesel TOY055AKF1<br />
Medium - Foam Cell LWB Petrol TOY055BKF<br />
Medium - Foam Cell LWB Diesel TOY055BKF1<br />
Medium - Foam Cell Pro SWB Petrol TOY055AKP<br />
Medium - Foam Cell Pro SWB Diesel TOY055AKP1<br />
Medium - Foam Cell Pro LWB Petrol TOY055BKP<br />
Medium - Foam Cell Pro LWB Diesel TOY055BKP1<br />
Heavy - Nitro Gas LWB Petrol TOY055CKG<br />
Heavy - Nitro Gas LWB Diesel TOY055CKG1<br />
Heavy - Foam Cell LWB Petrol TOY055CKF<br />
Heavy - Foam Cell LWB Diesel TOY055CKF1<br />
Heavy - Foam Cell Pro LWB Petrol TOY055CKP<br />
Heavy - Foam Cell Pro LWB Diesel TOY055CKP1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs Sway Bar Spacer (Pro Kits Only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
365
ACCESSORIES AND SUSPENSION TO SUIT<br />
Toyota Prado<br />
90, 95 Series<br />
1996 to 10/2002<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA PRADO 90, 95 - 1996-10/2002<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD007<br />
SNORKEL<br />
3.4L Petrol V6 ISNORKEL005<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 900mm<br />
ITD900<br />
Single Drawer - 900mm<br />
ISD900<br />
Wing Kit - 900mm (GXL)<br />
ITDW004<br />
STEEL AND ALLOY ROOF RACK - MOUNT KITS<br />
Gutter Mount Feet - 125mm (8 Feet)<br />
IRRFEET125<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
SUSPENSION TO SUIT TOYOTA PRADO 90, 95 - 1996-10/2002<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12691GR 2<br />
Foam Cell Strut - Performance 24691FE 2<br />
Foam Cell Pro Strut - Performance 45691FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - Petrol 45mm 0 - 50kg TOY038B 1<br />
Heavy - Diesel 45mm 50 - 110kg TOY038C 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12661GR 2<br />
Foam Cell - Performance 24661FE 2<br />
Foam Cell Pro - Performance 45661FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - SWB 45mm 0 - 300kg TOY039A 1<br />
Medium - LWB 45mm 0 - 300kg TOY039B 1<br />
Heavy 45mm 300kg - GVM TOY039C 1<br />
COIL SPACER<br />
Polyurethane 20mm LCF20 2<br />
Polyurethane 30mm LCF30 2<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas SWB Petrol TOY038AKG<br />
Medium - Nitro Gas SWB Diesel TOY038AKG1<br />
Medium - Nitro Gas LWB Petrol TOY038BKG<br />
Medium - Nitro Gas LWB Diesel TOY038CKG<br />
Medium - Foam Cell SWB Petrol TOY038AKF<br />
Medium - Foam Cell SWB Diesel TOY038AKF1<br />
Medium - Foam Cell LWB Petrol TOY038BKF<br />
Medium - Foam Cell LWB Diesel TOY038CKF<br />
Medium - Foam Cell Pro SWB Petrol TOY038AKP<br />
Medium - Foam Cell Pro SWB Diesel TOY038AKP1<br />
Medium - Foam Cell Pro LWB Petrol TOY038BKP<br />
Medium - Foam Cell Pro LWB Diesel TOY038CKP<br />
Heavy - Nitro Gas LWB Petrol TOY038BKG1<br />
Heavy - Nitro Gas LWB Diesel TOY038CKG1<br />
Heavy - Foam Cell LWB Petrol TOY038BKF1<br />
Heavy - Foam Cell LWB Diesel TOY038CKF1<br />
Heavy - Foam Cell Pro LWB Petrol TOY038BKP1<br />
Heavy - Foam Cell Pro LWB Diesel TOY038CKP1<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
366 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description Part No. Qty<br />
Req<br />
SEQUOIA<br />
SUSPENSION UPGRADES TO SUIT<br />
COMING SOON<br />
367
ACCESSORIES TO SUIT<br />
Toyota Tacoma 2005+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA TACOMA - 2005+<br />
STEEL WINCH BULL BARS<br />
Raid Bull Bar<br />
• Compatible with Ironman 4x4 Cube Lights and Lightbars, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS (4-6 CUBE LIGHTS PER VEHICLE)<br />
300W Bright Sabre Dual Row Lightbar 815mm<br />
300W Bright Sabre Multi-Function Dual Row Lightbar 815mm<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm - Clear<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm - Amber<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm - Clear<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm - Amber<br />
10W Spot Beam Universal LED Light - 93mm L - Clear (3rd Light)<br />
10W Flood Beam Universal LED Light - 93mm L - Amber (3rd Light)<br />
STEEL SIDE STEPS<br />
Raid Rock Slider 1960mm<br />
Raid Rock Slider 2390mm<br />
• Long Bed Models Only<br />
TOWING<br />
Raid Rear Bumper<br />
• Compatible with Ironman 4x4 Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS (4 CUBE LIGHTS PER VEHICLE)<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (Long Bed)<br />
Electric with Remote Control (Short Bed)<br />
ATLAS RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBR072<br />
ILBDR002B<br />
ILBDR002BM<br />
ILED80B<br />
ILED80BA<br />
ILED80BF<br />
ILED80BFA<br />
ILEDWL10<br />
ILEDWL10FA<br />
SS072<br />
SS072L<br />
RTB072<br />
ILED20B<br />
ILED20BA<br />
ILED20BF<br />
ILED20BFA<br />
ILED20BFR<br />
UBP072<br />
ISLIDEAWAY072L-E<br />
ISLIDEAWAY072S-E<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
368 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2005+<br />
Toyota Tacoma<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA TACOMA - 2005+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12710GR 2<br />
Foam Cell Strut - Performance 24710FE 2<br />
Foam Cell Pro Strut - Performance 45710FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 45mm 0 - 50kg TOY065A 1<br />
Medium 45mm 0 - 50kg TOY065B 1<br />
Heavy 45mm 50 - 110kg TOY065C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST001 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA001FA-2 1<br />
SPACER KIT<br />
Sway Bar Spacer 1198K 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12744GR 2<br />
Foam Cell - Performance 24744FE 2<br />
Foam Cell Pro - Performance 45744FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium - Drivers Side 50mm 0 - 200kg TOY066BD/S 1<br />
Medium - Near Side 50mm 0 - 200kg TOY066BN/S 1<br />
Heavy - Drivers Side 50mm 200kg-GVM TOY066CD/S 1<br />
Heavy - Near Side 50mm 200kg-GVM+ TOY066CN/S 1<br />
U-BOLTS<br />
U-Bolt Kit 437UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1191UK 1<br />
SPACER KIT<br />
Centre Bearing Spacer Kit 1192K 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
Add-A-Leaf ISL6010 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY066BKG<br />
TOY066BKF<br />
TOY066BKP<br />
TOY066CKG<br />
TOY066CKF<br />
TOY066CKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Strut Shock Absorbers<br />
Leaf Springs U-Bolts Centre Bearing Spacer Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
369
ACCESSORIES TO SUIT<br />
Toyota Tundra 2022+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA TUNDRA - 2022+<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (Long Bed)<br />
Electric with Remote Control (Short Bed)<br />
ATLAS RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
ISLIDEAWAY073L-E<br />
ISLIDEAWAY073S-E<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
370 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2022+<br />
Toyota Tundra<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA TUNDRA - 2022+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 1 12002GR 2<br />
Nitro Gas Strut - Long Travel Performance* 1 - AVAILABLE Q4, 2023 12002LGR 2<br />
Foam Cell Pro Strut - Performance 45002FE 2<br />
Foam Cell Pro Strut - Long Travel Performance*- AVAILABLE Q4, 2023 45002LFE 2<br />
*NOTE: MANDATORY FITMENT of UCA098FA with 45002LFE / 12002LGR<br />
1<br />
Height adjustable with Ironman 4x4 Strut Trim Packers<br />
COIL SPRINGS - TO SUIT NITRO GAS Est. Lift Additional Load<br />
Light 50mm 0 - 50kg TOY089A 1<br />
Light 75mm 0 - 50kg TOY085A 1<br />
Medium 50mm 0 - 50kg TOY089B 1<br />
Medium 75mm 0 - 50kg TOY085B 1<br />
Heavy 50mm 50 - 110kg TOY089C 1<br />
Heavy 75mm 50 - 110kg TOY085C 1<br />
COIL SPRINGS - TO SUIT FOAM CELL PRO Est. Lift Additional Load<br />
Light 50mm 0 - 50kg TOY088A 1<br />
Light 75mm 0 - 50kg TOY086A 1<br />
Medium 50mm 0 - 50kg TOY088B 1<br />
Medium 75mm 0 - 50kg TOY086B 1<br />
Heavy 50mm 50 - 110kg TOY088C 1<br />
Heavy 75mm 50 - 110kg TOY086C 1<br />
STRUT MOUNTS<br />
Steel Strut Top ISST004 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms - AVAILABLE Q4, 2023 UCA098FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12003GRC 2<br />
Nitro Gas - Performance 12003GR 2<br />
Foam Cell Pro - Comfort 45003FEC 2<br />
Foam Cell Pro - Performance 45003FE 2<br />
Foam Cell Pro - Professional 45003FEP 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light 25mm 0 - 200kg TOY087A 1<br />
Medium 50mm 0 - 200kg TOY087B 1<br />
Medium (with Accessories) 50mm 200 - 400kg TOY084B1 1<br />
Heavy 50mm 400 - 800kg TOY084C 1<br />
Extra Heavy 50mm 800kg+ TOY084D 1<br />
PANHARD ROD<br />
Adjustable Panhard Rod PANHARD019 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Medium - Foam Cell Pro<br />
Heavy - Nitro Gas<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Strut Shock Absorbers Coil Springs<br />
TBC<br />
TBC<br />
TBC<br />
TBC<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
371
ACCESSORIES TO SUIT<br />
Toyota Tundra<br />
2013 to 2020<br />
2020 to 2021<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT TOYOTA TUNDRA - 2013-2021<br />
STEEL WINCH BULL BARS<br />
Raid Bull Bar<br />
• Compatible with Ironman 4x4 Cube Lights and Lightbars, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID BULL BARS (4-6 CUBE LIGHTS PER VEHICLE)<br />
300W Bright Sabre Dual Row Lightbar 815mm<br />
300W Bright Sabre Multi-Function Dual Row Lightbar 815mm<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm - Clear<br />
40W Bright Cube Spot Beam LED Cube Light - 81 x 75mm - Amber<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm - Clear<br />
40W Bright Cube Flood Beam LED Cube Light - 81 x 75mm - Amber<br />
10W Spot Beam Universal LED Light - 93mm L - Clear (3rd Light)<br />
10W Flood Beam Universal LED Light - 93mm L - Amber (3rd Light)<br />
STEEL SIDE STEPS<br />
Raid Rock Slider<br />
• Crew-Max Models only<br />
TOWING<br />
Raid Rear Bumper*<br />
* Not compatible with rear cross traffic radar models<br />
• Compatible with Ironman 4x4 Cube Lights, refer below for available options<br />
LIGHTING OPTIONS - TO SUIT RAID REAR BARS (4 CUBE LIGHTS PER VEHICLE)<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Clear<br />
20W Bright Cube Spot Beam LED Cube Light - 70 x 64mm (Each) - Amber<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Clear<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Amber<br />
20W Bright Cube Flood Beam LED Cube Light - 70 x 64mm (Each) - Red<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control (Long Bed)<br />
Electric with Remote Control (Short Bed)<br />
ATLAS RACK KITS<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
BBR073<br />
ILBDR002B<br />
ILBDR002BM<br />
ILED80B<br />
ILED80BA<br />
ILED80BF<br />
ILED80BFA<br />
ILEDWL10<br />
ILEDWL10FA<br />
SS073<br />
RTB073<br />
ILED20B<br />
ILED20BA<br />
ILED20BF<br />
ILED20BFA<br />
ILED20BFR<br />
UBP073<br />
ISLIDEAWAY073L-E<br />
ISLIDEAWAY073S-E<br />
IFRSLDAWAYPGK<br />
IFRSLDAWAYC2K<br />
IDIFFBRE<br />
372 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2006 to 2021<br />
Toyota Tundra<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TOYOTA TUNDRA - 2006-2021<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell Strut - Performance 24780FE 2<br />
Foam Cell Pro Strut - Performance 45780FE 2<br />
• Foam Cell Pro - Must use TOY063B or TOY063C Front Coil Springs<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 60mm 0 - 50kg TOY070B 1<br />
Heavy 60mm 50 - 110kg TOY070C 1<br />
• Not compatible with Foam Cell Pro, refer note above<br />
STRUT MOUNTS<br />
Steel Strut Top ISST005 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Foam Cell HILFR05F 2<br />
10mm Strut Trim Packer Foam Cell HILFR10F 2<br />
15mm Strut Trim Packer Foam Cell HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA073FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Foam Cell - Performance 24781FE 2<br />
Foam Cell Pro - Performance 45781FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 60mm 0 - 200kg TOY071B 2<br />
Heavy 60mm 200 - 400kg TOY071C 2<br />
U-BOLTS<br />
U-Bolt Kit 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1196UK 1<br />
DRIVELINE SPACERS<br />
Centre Bearing Spacer Kit 1217K 1<br />
SPACER KIT<br />
Brake Hose Relocation Kit 1197K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1150 2<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP3 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Foam Cell<br />
Medium - Foam Cell Pro<br />
Heavy - Foam Cell<br />
Heavy - Foam Cell Pro<br />
SUSPENSION KIT CONTENTS<br />
TOY070BKF<br />
TOY070BKP<br />
TOY070CKF<br />
TOY070CKP<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes Strut Shock Absorbers<br />
Leaf Springs U-Bolts Brake Hose Relocation Kit<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
373
SUSPENSION TO SUIT<br />
Troller T4 7/2014+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TROLLER T4 - 7/2014+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12755GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 - 50kg TROL001B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12755GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 50mm 0 -200kg TROL002B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
TROL001BKG<br />
Shock Absorbers<br />
Coil Springs<br />
374 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1997 to 6/2014<br />
Troller T4<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT TROLLER T4 - 1997-6/2014<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12765GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 50kg TROL003B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12765GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 -200kg TROL004B 1<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
TROL003BKG<br />
Shock Absorbers<br />
Coil Springs<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
375
SUSPENSION TO SUIT<br />
UAZ Hunter<br />
All Models<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT UAZ HUNTER<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12652GR 2<br />
Foam Cell - Performance 24652FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 80kg IMAZ001B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12698GR 2<br />
Foam Cell - Performance 24698FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg IMAZ002B 2<br />
U-BOLTS<br />
U-Bolt Kit 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1188UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1189 2<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
IMAZ001BKG<br />
IMAZ001BKF<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Shackles<br />
376 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1997+<br />
UAZ Patriot<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT UAZ PATRIOT - 1997+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12637GRS 2<br />
Foam Cell - Performance 24637FES 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 80kg IMAZ001B 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12698GR 2<br />
Foam Cell - Performance 24698FE 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 45mm 0 - 300kg IMAZ002B 2<br />
U-BOLTS<br />
U-Bolt Kit 678UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1188UK 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1189 2<br />
SUSPENSION KIT<br />
Medium - Nitro Gas<br />
Medium - Foam Cell<br />
SUSPENSION KIT CONTENTS<br />
IMAZ001BKG1<br />
IMAZ001BKF1<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Greasable Shackles<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
377
ACCESSORIES TO SUIT<br />
<strong>Vol</strong>kswagen Amarok 2023+<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT VOLKSWAGEN AMAROK - 2023+<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD112<br />
Raid Bull Bar<br />
BBR112<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL110<br />
Driving Light / Lightbar Patch Loom<br />
IPLS110<br />
• Can also be fitted to both 2WD and 4WD models.<br />
• Winch with Steel Cable and Roller Fairlead is not suitable - Use Winch with Synthetic Rope and Alloy Hawse only<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS110-D<br />
TOWING<br />
Rear Protection Towbar - Full Rear Bumper Replacement<br />
RTB112<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL110<br />
PREMIUM UNDERBODY PROTECTION<br />
Engine Bay and Transmission<br />
UBP110<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
CANOPY - PINNACLE 2 SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY112-P<br />
Clear White<br />
ICANOPY112-W<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control - (Excludes Aventra)<br />
ISLIDEAWAY110-E<br />
Manual Operation - (Excludes Aventra)<br />
ISLIDEAWAY110-M<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform A with Blade Fit Kit (Suits Core, Life and Style) - 1530mm Length<br />
IFR054PAK<br />
Platform A with Blade Fit Kit (Suits Panamericana and Aventra) - 1530mm Length<br />
IFR110WTPAK<br />
Crossbar (x 2) and Fit Kit (Suits Core, Life and Style) -1250mm Width<br />
IFR054C2K<br />
Crossbar (x 2) and Fit Kit (Suits Panamericana and Aventra) -1375mm Width<br />
IFRK094<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPSK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
FLOOR MATS<br />
Moulded Fit TPO Floor Mats - Front and Rear Set<br />
FLMT110-RHD-2ROW<br />
SUN SHADE<br />
Vehicle Specific Sun Screen Shade - Front<br />
SUNSHD110<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
378 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
2023+<br />
<strong>Vol</strong>kswagen Amarok<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT VOLKSWAGEN AMAROK - 2023+<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12885GR 2<br />
Foam Cell Strut - Performance 24885FE 2<br />
Foam Cell Pro Strut - Performance 45885FE 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Light - No Bar 40mm 0 - 50kg FOR010A 1<br />
Medium - Bar Only 50mm 0 - 80kg FOR010B 1<br />
Heavy - Bar / Winch 50mm 80 - 120kg FOR010C 1<br />
• For V6 models, to achieve stated ride height add HILFR05F or adjust Pro seat height to 198mm<br />
STRUT MOUNTS<br />
Steel Strut Top ISST110 2<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas / Foam Cell HILFR05/HILFR05F 2<br />
10mm Strut Trim Packer Nitro Gas / Foam Cell HILFR10/HILFR10F 2<br />
15mm Strut Trim Packer Nitro Gas / Foam Cell HILFR15/HILFR15F 2<br />
• ONLY Compatible with Ironman 4x4 Struts (except Pro), lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
CONTROL ARMS<br />
Pro-Forge Upper Control Arms UCA110FA-2 1<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Comfort 12886GRC 2<br />
Nitro Gas - Performance 12886GR 2<br />
Foam Cell - Comfort 24886FEC 2<br />
Foam Cell - Performance 24886FE 2<br />
Foam Cell Pro - Comfort 45886FEC 2<br />
Foam Cell Pro - Performance 45886FE 2<br />
Foam Cell Pro - Professional 45886FEP 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Light 40mm 0 - 200kg FOR012A 2<br />
Medium 45mm 0 - 300kg FOR012B 2<br />
Heavy 45mm 300kg - 600kg FOR012C 2<br />
Extra Heavy 45mm 600kg - GVM FOR012D 2<br />
Extra Leaf* FOR012XL3 2<br />
Centre Bolt and Liner Kit to suit Extra Leaf FOR012XLK 1<br />
* Suits Ironman 4x4 springs only<br />
• Possible driveline vibration may occur due to increased ride height, use 1223K to reduce vibration to satisfactory level<br />
U-BOLTS<br />
U-Bolt Kit 438UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 1193UK 1<br />
SPACER KITS<br />
Centre Bearing Spacer Kit 1223K 1<br />
GREASABLE SHACKLES AND PINS<br />
Greasable Shackle 1147 2<br />
Non-Greasable Pin 387-1 2<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Light - Nitro Gas<br />
FOR010AKG<br />
Light - Foam Cell<br />
FOR010AKF<br />
Light - Foam Cell Pro<br />
FOR010AKP<br />
Medium - Nitro Gas<br />
FOR010BKG<br />
Medium - Foam Cell<br />
FOR010BKF<br />
Medium - Foam Cell Pro<br />
FOR010BKP<br />
Heavy - Nitro Gas<br />
FOR010CKG<br />
Heavy - Foam Cell<br />
FOR010CKF<br />
Heavy - Foam Cell Pro<br />
FOR010CKP<br />
Extra Heavy - Nitro Gas<br />
FOR010DKG<br />
Extra Heavy - Foam Cell<br />
FOR010DKF<br />
Extra Heavy - Foam Cell Pro<br />
FOR010DKP<br />
• Possible driveline vibration may occur due to increased ride height, use 1223K to reduce vibration to satisfactory level<br />
SUSPENSION KIT CONTENTS<br />
Shock Absorbers Coil Springs U-Bolts Centre Bearing Spacer Kit<br />
Strut Shock Absorbers Leaf Springs Polyurethane Spring Bushes<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
379
ACCESSORIES TO SUIT<br />
<strong>Vol</strong>kswagen Amarok<br />
V6 / 4 Cylinder<br />
11/2016 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT VOLKSWAGEN AMAROK - 11/2016-2022<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD060<br />
Proguard No Loop<br />
BBT060-NL<br />
Proguard Single Loop Kit<br />
BB060-SL<br />
Proguard Triple Loop Kit<br />
BB060-TL<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL060<br />
Driving Light / Lightbar Patch Loom<br />
IPLS060<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL060<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS034<br />
Side Rails<br />
SS034 RAIL<br />
Side Steps and Rails<br />
SSR034<br />
TOWING<br />
Rear Protection Towbar - Full Rear Bumper Replacement (11/2016 to 2020 only)<br />
RTB060<br />
Towbar Wiring Loom - Plug and Play<br />
ITBL060<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm<br />
ITDW060<br />
SNORKEL<br />
Amarok<br />
ISNORKEL037<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
CANOPY021-P<br />
Candy White (B4B4)<br />
CANOPY021-W<br />
CANOPY - PINNACLE 2 SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY060-P<br />
Candy White (B4B4)<br />
ICANOPY060-W<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY060-E<br />
Sports Bar Adaptor<br />
ISLIDEAWAY060-SBA<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
380 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
V6 / 4 Cylinder<br />
11/2016 to 2022<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT VOLKSWAGEN AMAROK - 11/2016-2022<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12725GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - 4cyl 30mm 0 - 50kg VOLKS001B 1<br />
Heavy - V6 30mm 50 - 110kg VOLKS001C 1<br />
Heavy - V6 30mm 50 - 110kg VOLKS001D 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
10mm Strut Trim Packer Nitro Gas HILFR10 2<br />
15mm Strut Trim Packer Nitro Gas HILFR15 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12726GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 300kg VOLKS002B 2<br />
Heavy 35mm 200 - 400kg VOLKS002C 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 32mm Shackle Bushes 1190UK 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
VOLKS001BKG<br />
VOLKS001CKG<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
SUSPENSION TO SUIT<br />
<strong>Vol</strong>kswagen Amarok<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
381
ACCESSORIES TO SUIT<br />
<strong>Vol</strong>kswagen Amarok 2011 to 10/2016<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
ACCESSORIES TO SUIT VOLKSWAGEN AMAROK - 2011-10/2016<br />
STEEL WINCH BULL BARS<br />
Commercial Deluxe<br />
BBCD034<br />
Bull Bar Multi-Function Light Patch Loom<br />
IBBPL060<br />
Driving Light / Lightbar Patch Loom<br />
IPLS060<br />
Driving Light / Lightbar Patch Loom - While Stocks Last<br />
IPL060<br />
• Can also be fitted to both 2WD and 4WD models.<br />
STEEL SIDE STEPS AND RAILS<br />
Side Steps<br />
SS034<br />
Side Rails<br />
SS034 RAIL<br />
Side Steps and Rails<br />
SSR034<br />
LOCKSAFE DRAWER SYSTEMS<br />
Twin Drawers - 1300mm<br />
ITD1300<br />
Single Drawer - 1300mm<br />
ISD1300<br />
Wing Kit - 1300mm*<br />
ITDW040<br />
*Designed to suit factory tubs, will not suit ute liner without modification.<br />
SNORKEL<br />
Amarok<br />
ISNORKEL037<br />
CANOPY - ABS PLASTIC (SIDE LIFT UP WINDOWS) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
CANOPY021-P<br />
Candy White (B4B4)<br />
CANOPY021-W<br />
Black (2T2)<br />
CANOPY021-B<br />
CANOPY - PINNACLE 2 SMOOTH FINISH FIBREGLASS (SIDE LIFT UP WINDOWS AND CENTRAL LOCKING REAR DOOR) - FITS 4X4 AND 4X2 DUAL CAB MODELS<br />
Pre-Primed<br />
ICANOPY060-P<br />
Candy White (B4B4)<br />
ICANOPY060-W<br />
* Pre-primed canopies, plus colour coding.<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVER<br />
Electric with Remote Control<br />
ISLIDEAWAY060-E<br />
Sports Bar Adaptor<br />
ISLIDEAWAY060-SBA<br />
ATLAS DUAL CAB ROOF RACK KITS<br />
Platform K with Leg Fit Kit to Suit Pinnacle 2 Canopy - 1390mm Length<br />
IFRP2PKK<br />
Crossbar (x 2) and Fit Kit to Suit Pinnacle 2 Canopy - 1250mm Width<br />
IFRP2C125K<br />
Platform G with Blade Fit Kit to Suit Slideaway Hard Tonneau Cover - 1390mm Length<br />
IFRSLDAWAYPGK<br />
Crossbar (x 2) and Fit Kit to Suit Slideaway Hard Tonneau Cover - 1650mm Width<br />
IFRSLDAWAYC2K<br />
• See Page 36 and 37 for more Atlas rack and crossbar options.<br />
BREATHER KIT<br />
Universal Twin Manifold Filtered Breather Kit<br />
IDIFFBRE<br />
382 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION TO SUIT<br />
1997 to 10/2016<br />
<strong>Vol</strong>kswagen Amarok<br />
Product Description Part No. Qty<br />
Req<br />
Please check vehicle date range (if shown) next to product description prior to ordering<br />
SUSPENSION TO SUIT VOLKSWAGEN AMAROK - 1997-10/2016<br />
FRONT SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas Strut - Performance 12725GR 2<br />
COIL SPRINGS Est. Lift Additional Load<br />
Medium - 4cyl 30mm 0 - 50kg VOLKS001B 1<br />
Heavy - V6 30mm 50 - 110kg VOLKS001C 1<br />
Heavy - V6 30mm 50 - 110kg VOLKS001D 1<br />
TRIM PACKERS<br />
5mm Strut Trim Packer Nitro Gas HILFR05 2<br />
10mm Strut Trim Packer Nitro Gas HILFR10 2<br />
15mm Strut Trim Packer Nitro Gas HILFR15 2<br />
• ONLY Compatible with Ironman 4x4 Struts, lift height subject to 2:1 motion ratio. Unnecessary fitment may lift vehicle too high<br />
REAR SUSPENSION<br />
SHOCK ABSORBER<br />
Nitro Gas - Performance 12726GR 2<br />
LEAF SPRINGS Est. Lift Additional Load<br />
Medium 35mm 0 - 300kg VOLKS002B 2<br />
Heavy 35mm 200 - 400kg VOLKS002C 2<br />
U-BOLTS<br />
U-Bolt Kit 415UBK 2<br />
POLYURETHANE SPRING BUSHES<br />
Bush Kit 32mm Shackle Bushes 1190UK 1<br />
HELPER SPRINGS<br />
Load Plus Helper Springs LP4 1<br />
SUSPENSION KIT - Specify Front Coil Springs When Ordering<br />
Medium - Nitro Gas<br />
Heavy - Nitro Gas<br />
SUSPENSION KIT CONTENTS<br />
VOLKS001BKG<br />
VOLKS001CKG<br />
Shock Absorbers Coil Springs Polyurethane Spring Bushes<br />
Leaf Springs U-Bolts Strut Shock Absorbers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
383
ACCESSORIES AND SUSPENSION TO SUIT<br />
Product Description Part No. Qty<br />
Req<br />
384 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Product Description<br />
Part No.<br />
Spare Parts<br />
CATALOGUE<br />
Effective 1 August 2023<br />
385
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
BULL BARS<br />
Bullbar Indicator - LED Park/Indicator/DRL (Pair)<br />
1m Pinch Weld for Bumper Cut<br />
Bull Bar Fog Light - Halogen (Pair)<br />
Plastic Light Pod and Bracket - Old Style Triangle Unit (Each)<br />
Plastic Light Pod Surround L/H<br />
Plastic Light Pod Surround R/H<br />
Wiring Loom - New Style<br />
Plastic Inserts to suit Hilux Vigo BB002 (Pair)<br />
Ironman 4x4 Bull Bar Logo Badge<br />
Ironman 4x4 Logo Resin Style SS/ SSR Rails<br />
Washer Bottle to Suit BBC050/ BBCD050/ BBT050<br />
Plastic Light Pod Insert L/H (Single)<br />
Plastic Light Pod Insert R/H (Single)<br />
Bull Bar Loop O-Ring Kit<br />
Bumper Overrider for BBT - New Style (Pair)<br />
Bumper Overrider for BBC (Pair)<br />
Bumper Overrider for BBC/ BBCD033 to BBC/ BBCD049<br />
Bumper Overrider for BBCD035<br />
Bumper Overrider For BBC051/ BBCD051 onwards<br />
Bumper Overrider for BBT051 onwards<br />
Licence Plate Bracket<br />
Bull Bar LED Fog Light (Pair)<br />
Polyurethane Overrider Kit to Suit BBR090 Raid Bar<br />
Polyurethane Overrider Kit to Suit BBR110 Raid Bar<br />
Numberplate Flip Bracket - Bar Mount<br />
Numberplate Flip Bracket - Fairlead Mount<br />
Bolt on Hoop to suit BBR077<br />
UBP Mesh to suit BBCD110<br />
Load Resistor Kit with Mount Brackets for 12V/21W Indicator/Parker Replacement<br />
Load Resistor Kit with Mount Brackets for 12V/50W Indicator/Parker Replacement<br />
Universal Parking Sensor Holder to Suit Raid Bars (Lock Nut Style)<br />
Triple Stainless Steel Loop for BBT001<br />
Triple Stainless Steel Loop for BBT002<br />
Triple Stainless Steel Loop for BBT003<br />
Triple Stainless Steel Loop for BBT004<br />
Triple Stainless Steel Loop for BBT005/ 006<br />
Triple Stainless Steel Loop for BBT007<br />
Triple Stainless Steel Loop for BBT008<br />
Triple Stainless Steel Loop for BBT009<br />
Triple Stainless Steel Loop for BBT010<br />
Triple Stainless Steel Loop for BBT011<br />
Triple Stainless Steel Loop for BBT012<br />
Triple Stainless Steel Loop for BBT013<br />
Triple Stainless Steel Loop for BBT014<br />
Triple Stainless Steel Loop for BBT016<br />
Triple Stainless Steel Loop for BBT019<br />
Triple Stainless Steel Loop for BBT020<br />
Triple Stainless Steel Loop for BBT024<br />
Triple Stainless Steel Loop for BBT025<br />
Triple Stainless Steel Loop for BBT027<br />
Triple Stainless Steel Loop for BBT029<br />
Triple Stainless Steel Loop for BBT031<br />
Triple Stainless Steel Loop for BBT033<br />
Triple Stainless Steel Loop for BBT034<br />
Triple Stainless Steel Loop for BBT037<br />
Triple Stainless Steel Loop for BBT038<br />
Triple Stainless Steel Loop for BBT039<br />
Triple Stainless Steel Loop for BBT040<br />
BBPART002<br />
BBPART006<br />
BBPART008<br />
BBPART009<br />
BBPART009 L/H<br />
BBPART009 R/H<br />
BBPART012<br />
BBPART013<br />
BBPART014<br />
BBPART019<br />
BBPART021<br />
BBPART022-LH<br />
BBPART022-RH<br />
BBPART023<br />
BBPART010<br />
BBPART011<br />
BBPART015<br />
BBPART020<br />
BBPART024<br />
BBPART025<br />
BBPART026<br />
BBPART031<br />
BBPART045<br />
BBPART046<br />
BBPART052<br />
BBPART053<br />
BBPART054<br />
BBPART062<br />
LR12V21W<br />
LR12V50W<br />
RAPIDPSHUNI<br />
BBPARTLOOP001<br />
BBPARTLOOP002<br />
BBPARTLOOP003<br />
BBPARTLOOP004<br />
BBPARTLOOP005<br />
BBPARTLOOP007<br />
BBPARTLOOP008<br />
BBPARTLOOP009<br />
BBPARTLOOP010<br />
BBPARTLOOP011<br />
BBPARTLOOP012<br />
BBPARTLOOP013<br />
BBPARTLOOP014<br />
BBPARTLOOP016<br />
BBPARTLOOP019<br />
BBPARTLOOP020<br />
BBPARTLOOP024<br />
BBPARTLOOP025<br />
BBPARTLOOP027<br />
BBPARTLOOP029<br />
BBPARTLOOP031<br />
BBPARTLOOP033<br />
BBPARTLOOP034<br />
BBPARTLOOP037<br />
BBPARTLOOP038<br />
BBPARTLOOP039<br />
BBPARTLOOP040<br />
386 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
Triple Stainless Steel Loop for BBT041<br />
Triple Stainless Steel Loop for BBT042<br />
Triple Stainless Steel Loop for BBT043<br />
Triple Stainless Steel Loop for BBT044<br />
Triple Stainless Steel Loop for BBT045<br />
Triple Stainless Steel Loop for BBT047<br />
Triple Stainless Steel Loop for BBT048<br />
Triple Stainless Steel Loop for BBT049<br />
Triple Stainless Steel Loop for BBT050<br />
Triple Stainless Steel Loop for BBT051<br />
Triple Stainless Steel Loop for BBT054<br />
Triple Stainless Steel Loop for BBT056/ 056xv<br />
Triple Stainless Steel Loop for BBT057<br />
Triple Stainless Steel Loop for BBT058<br />
BBPARTLOOP041<br />
BBPARTLOOP042<br />
BBPARTLOOP043<br />
BBPARTLOOP044<br />
BBPARTLOOP045<br />
BBPARTLOOP047<br />
BBPARTLOOP048<br />
BBPARTLOOP049<br />
BBPARTLOOP050<br />
BBPARTLOOP051<br />
BBPARTLOOP054<br />
BBPARTLOOP056<br />
BBPARTLOOP057<br />
BBPARTLOOP058<br />
CANOPIES<br />
Mount Kit for CANOPY014 CANOPY MOUNT KIT 014<br />
Mount Kit for CANOPY015 CANOPY MOUNT KIT 015<br />
Rear Door Handle and Key Set (For Non Central Locking Models)<br />
CANOPYSPARE001<br />
Rear Window Gas Strut CANOPY001/ 002/ 005/ 006/ 007 (Pair)<br />
CANOPYSPARE002<br />
Rear Window Gas Strut for CANOPY003/ 004 (Pair)<br />
CANOPYSPARE003<br />
Plate Side Lock Set All Models to CANOPY008 (Striker)<br />
CANOPYSPARE004<br />
Canopy Internal Light (All Models)<br />
CANOPYSPARE005<br />
Rubber Seal Kit Suits All to CANOPY007<br />
CANOPYSPARE006<br />
Rubber Seal Kit CANOPY008 to CANOPY011<br />
CANOPYSPARE007<br />
Rear Window Bolt Set for CANOPY003/ 004<br />
CANOPYSPARE008<br />
Edge Seal Kit for CANOPY006<br />
CANOPYSPARE009<br />
Edge Seal Kit for CANOPY005<br />
CANOPYSPARE010<br />
Edge Seal Kit for CANOPY001/ 002<br />
CANOPYSPARE012<br />
Replacement LED Brakelight (All Models)<br />
CANOPYSPARE013<br />
Sliding Window L/H for CANOPY001/ 002/ 005/ 006/ 007/ 009<br />
CANOPYSPARE014<br />
Sliding Window L/H for CANOPY003/ 004<br />
CANOPYSPARE015<br />
Sliding Window R/H for CANOPY003/ 004<br />
CANOPYSPARE016<br />
Sliding Window R/H for CANOPY001/ 002/ 005/ 006/ 007/ 009<br />
CANOPYSPARE017<br />
Rear Glass Rod Set for CANOPY001 to CANOPY007 and CANOPY009<br />
CANOPYSPARE018<br />
Rear Side Plate Lock Set for CANOPY010<br />
CANOPYSPARE019<br />
Rear Side Plate Lock Set for CANOPY009/ 011<br />
CANOPYSPARE020<br />
Sliding Window R/H for CANOPY008/ 010/ 011/ 012<br />
CANOPYSPARE021<br />
Sliding Window L/H for CANOPY008/ 010/ 011/ 012<br />
CANOPYSPARE022<br />
Rear Window Gas Strut for CANOPY011 (Pair)<br />
CANOPYSPARE023<br />
Rear Window Bolt Set for CANOPY001/ 002/ 005/ 006/ 007<br />
CANOPYSPARE024<br />
Rotary Lock for CANOPY008<br />
CANOPYSPARE025<br />
Rear Window Hinge Set for CANOPY001/ 002/ 005/ 006/ 007/ 009<br />
CANOPYSPARE026<br />
Rear Window Hinge Set for CANOPY008<br />
CANOPYSPARE027<br />
Rear Window Hinge Set for CANOPY010<br />
CANOPYSPARE028<br />
Rear Window Hinge Set for CANOPY011<br />
CANOPYSPARE029<br />
Rear Window Bolt Set Upper for CANOPY010<br />
CANOPYSPARE031<br />
Front Sliding Window for CANOPY001/ 005/ 006/ 007/ 008/ 010/ 014<br />
CANOPYSPARE032<br />
Rear Window Gas Strut for CANOPY010 (Pair)<br />
CANOPYSPARE033<br />
Rear Window Gas Strut for CANOPY008 (Pair)<br />
CANOPYSPARE034<br />
Rotary Lock Set for CANOPY010/ 011/ 012<br />
CANOPYSPARE035<br />
Mount Kit for CANOPY001<br />
CANOPYSPARE036<br />
Mount Kit for CANOPY002<br />
CANOPYSPARE037<br />
Mount Kit for CANOPY003<br />
CANOPYSPARE038<br />
Mount Kit for CANOPY004<br />
CANOPYSPARE039<br />
Mount Kit for CANOPY005<br />
CANOPYSPARE040<br />
Mount Kit for CANOPY006<br />
CANOPYSPARE041<br />
Mount Kit for CANOPY007<br />
CANOPYSPARE042<br />
Mount Kit for CANOPY008<br />
CANOPYSPARE043<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
387
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
CANOPIES - CONTINUED<br />
Mount Kit for CANOPY009<br />
Mount Kit for CANOPY010<br />
Mount Kit for CANOPY011<br />
Mount Kit for CANOPY012<br />
Side Lift Up Window L/H for CANOPY001/ 002/ 005/ 006/ 007/ 009<br />
Side Lift Up Window R/H for CANOPY001/ 002/ 005/ 006/ 007/ 009<br />
Side Lift Up Window L/H for CANOPY003/ 004<br />
Side Lift Up Window R/H for CANOPY003/ 004<br />
Side Lift Up Window L/H for CANOPY008/ 010/ 011/ 012<br />
Side Lift Up Window R/H for CANOPY008/ 010/ 011/ 012<br />
Rubber Window Seal Kit for CANOPY001/ 002/ 003/ 004<br />
Window Rubber Seal Kit for CANOPY008<br />
Mounting Kit Seal for CANOPY010<br />
Window Rubber Seal Kit for CANOPY011<br />
Rear Window Bolt Set Lower Series 1<br />
Rear Window Bolt Set Lower for CANOPY010<br />
Ironman 4x4 Resin Logo Small<br />
Side Lift Up Window Handle for Series 1/ 2 (Set of 4)<br />
Side lift Up Window Handle for Series 3 (Set of 4)<br />
Rear Window Gas Strut for CANOPY009 (Pair)<br />
Front Sliding Window for CANOPY011/ 012<br />
Rear Window Lock and Key Set for CANOPY014/ 015<br />
Side Lift Up Window L/H for CANOPY014<br />
Side Lift Up Window R/H for CANOPY014<br />
Internal Light - Battery Operated<br />
Sliding Window L/H for CANOPY019/ 020<br />
Sliding Window R/H for CANOPY019/ 020<br />
Lift Up Window L/H for CANOPY019/ 020<br />
Lift Up Window R/H for CANOPY019/ 020<br />
Rear Door Key Set - Central Locking<br />
Rear Window Gas Strut for CANOPY014/ 015 (Pair)<br />
Side Lock Set for CANOPY014/ 015<br />
Rear Window Seal for CANOPY014/ 015/ 019/ 020<br />
Central Locking Solenoid<br />
Side Lift Up Window L/H for CANOPY013/ 015<br />
Side Lift Up Window R/H for CANOPY013/ 015<br />
Sliding Window L/H for CANOPY013/ 015/ 017<br />
Sliding Window R/H for CANOPY013/ 015/ 017<br />
Rubber Window Seal for Side Windows S3<br />
Rear Window Gas Strut for CANOPY012/ 019 (Pair)<br />
Rear Window Gas Strut for CANOPY013/ 017/ 018 (Pair)<br />
Rear Side Lock Catches for CANOPY019/ 020 (Pair)<br />
Sliding Window L/H for CANOPY022<br />
Sliding Window R/H for CANOPY022<br />
Side Lift Up Window L/H for CANOPY022<br />
Side Lift Up Window R/H for CANOPY022<br />
Rear Window for CANOPY003<br />
Rear Window for CANOPY004<br />
Rear Window for CANOPY005<br />
Rear Window for CANOPY006<br />
Rear Window for CANOPY007<br />
Rear Window for CANOPY008<br />
Rear Window for CANOPY009<br />
Rear Window for CANOPY010<br />
Rear Window Assy for CANOPY010 - Central Locking<br />
Rear Window for CANOPY011<br />
Rear Window for CANOPY012<br />
Rear Window Assy for CANOPY014<br />
CANOPYSPARE044<br />
CANOPYSPARE045<br />
CANOPYSPARE046<br />
CANOPYSPARE047<br />
CANOPYSPARE048<br />
CANOPYSPARE049<br />
CANOPYSPARE050<br />
CANOPYSPARE051<br />
CANOPYSPARE052<br />
CANOPYSPARE053<br />
CANOPYSPARE054<br />
CANOPYSPARE055<br />
CANOPYSPARE056<br />
CANOPYSPARE057<br />
CANOPYSPARE058<br />
CANOPYSPARE059<br />
CANOPYSPARE060<br />
CANOPYSPARE061<br />
CANOPYSPARE062<br />
CANOPYSPARE063<br />
CANOPYSPARE064<br />
CANOPYSPARE066<br />
CANOPYSPARE068<br />
CANOPYSPARE069<br />
CANOPYSPARE070<br />
CANOPYSPARE071<br />
CANOPYSPARE072<br />
CANOPYSPARE073<br />
CANOPYSPARE074<br />
CANOPYSPARE075<br />
CANOPYSPARE076<br />
CANOPYSPARE077<br />
CANOPYSPARE078<br />
CANOPYSPARE079<br />
CANOPYSPARE080<br />
CANOPYSPARE081<br />
CANOPYSPARE082<br />
CANOPYSPARE083<br />
CANOPYSPARE084<br />
CANOPYSPARE085<br />
CANOPYSPARE086<br />
CANOPYSPARE087<br />
CANOPYSPARE088<br />
CANOPYSPARE089<br />
CANOPYSPARE090<br />
CANOPYSPARE091<br />
CANOPY003-WINDOW<br />
CANOPY004-WINDOW<br />
CANOPY005-WINDOW<br />
CANOPY006-WINDOW<br />
CANOPY007-WINDOW<br />
CANOPY008-WINDOW<br />
CANOPY009-WINDOW<br />
CANOPY010-WINDOW<br />
CANOPY010-CL WINDOW<br />
CANOPY011-WINDOW<br />
CANOPY012-WINDOW<br />
CANOPY014-WINDOW<br />
388 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
Rear Window Assy for CANOPY014 - Central Locking<br />
Rear Window Assy Suits CANOPY015<br />
Rear Window Assy for CANOPY015 - Central Locking<br />
Rear Window Assy Suits CANOPY017<br />
Rear Window Assy CANOPY019 - Central Locking<br />
Rear Window Assy CANOPY020 - Central Locking<br />
Lift Up Window L/H<br />
Lift Up Window R/H<br />
Front Sliding Window Complete<br />
Rubber Seal Kit Bottom (All Models)<br />
Rear Window Seal Kit (All)<br />
Side Window Seal Kit (All)<br />
Side Lift Up Window Gas Strut (All)<br />
Interior LED Battery Light<br />
Rear LED Brake Light<br />
Canopy Mount Kit (All)<br />
Door Side Bracket and Striker Plate (All)<br />
Rear Door Side Lock Set (All)<br />
Rear Door Hinge Set (All)<br />
Rear Window Gas Strut Brackets (LH / RH)<br />
Side Window Rubber Grommet (Kit of 4)<br />
Roof Rail (All Models)<br />
Fibreglass Canopy Packing Box<br />
Rear Window Gas Strut LH (All Models)<br />
Rear Window Gas Strut RH (All Models)<br />
Rear Door Sidelock RH<br />
Rear Door Sidelock LH<br />
Ironman 4x4 Logo for Fibreglass Canopies (All Models)<br />
Rear Door Bottom Seal (All Models)<br />
Rear Door Sidelock Set RH (NP300 Only)<br />
Rear Door Sidelock Set LH (NP300 Only)<br />
Rear Window Lock and Key Set (NP300 Only)<br />
Side and Rear Window Handle and Key Set<br />
Canopy Mount Kit (MQ-MR Triton)<br />
Canopy Mount Kit (NP300)<br />
Canopy Mount Kit (Hilux Revo)<br />
Rear Window Suits CANFIBRE054 (Includes Fibreglass Frame Black Painted)<br />
Rear Window Suits CANFIBRE050 (Includes Fibreglass Frame Black Painted)<br />
Rear Window Suits CANFIBRE051 (Includes Fibreglass Frame Black Painted)<br />
Rear Window Suits CANFIBRE048 (Includes Fibreglass Frame Black Painted)<br />
Rear Window Suits CANFIBRE057 (Includes Fibreglass Frame Black Painted)<br />
Rear Window for Pinnacle 2 ICANOPY048 (Complete)<br />
Rear Window for Pinnacle 2 ICANOPY050 (Complete)<br />
Rear Window for Pinnacle 2 ICANOPY051 (Complete)<br />
Rear Window for Pinnacle 2 ICANOPY054 (Complete)<br />
Rear Window for Pinnacle 2 ICANOPY060 (Complete)<br />
Rear Window for Pinnacle 2 ICANOPY074 (Complete)<br />
Rear Window for Pinnacle 2 ICANOPY082 (Complete)<br />
Sliding Window L/H for Pinnacle 2<br />
Sliding Window R/H for Pinnacle 2<br />
Lift Up Window L/H for Pinnacle 2<br />
Lift Up Window R/H for Pinnacle 2<br />
Lock and Key Set for Pinnacle 2 (Complete)<br />
Side Window Gas Struts for Pinnacle 2<br />
Rear Window (Small) Gas Strut for Pinnacle 2<br />
Rear Window (Large) Gas Strut for Pinnacle 2<br />
Central Locking Actuator for Pinnacle 2<br />
LED Brake Light for Pinnacle 2<br />
LED Internal Light for Pinnacle 2<br />
CANOPY014-CL WINDOW<br />
CANOPY015-WINDOW<br />
CANOPY015-CL WINDOW<br />
CANOPY017-WINDOW<br />
CANOPY019-CL WINDOW<br />
CANOPY020-CL WINDOW<br />
CANFIBRESPARE006<br />
CANFIBRESPARE007<br />
CANFIBRESPARE010<br />
CANFIBRESPARE011<br />
CANFIBRESPARE012<br />
CANFIBRESPARE013<br />
CANFIBRESPARE014<br />
CANFIBRESPARE015<br />
CANFIBRESPARE016<br />
CANFIBRESPARE019<br />
CANFIBRESPARE020<br />
CANFIBRESPARE021<br />
CANFIBRESPARE022<br />
CANFIBRESPARE023<br />
CANFIBRESPARE024<br />
CANFIBRESPARE025<br />
CANFIBRESPARE026<br />
CANFIBRESPARE027<br />
CANFIBRESPARE028<br />
CANFIBRESPARE029<br />
CANFIBRESPARE030<br />
CANFIBRESPARE031<br />
CANFIBRESPARE032<br />
CANFIBRESPARE033<br />
CANFIBRESPARE034<br />
CANFIBRESPARE035<br />
CANFIBRESPARE036<br />
CANFIBRESPARE037<br />
CANFIBRESPARE038<br />
CANFIBRESPARE039<br />
CANFIBRE054-WINDOW<br />
CANFIBRE050-WINDOW<br />
CANFIBRE051-WINDOW<br />
CANFIBRE048-WINDOW<br />
CANFIBRE057-WINDOW<br />
ICANOPY048-WINDOW<br />
ICANOPY050-WINDOW<br />
ICANOPY051-WINDOW<br />
ICANOPY054-WINDOW<br />
ICANOPY060-WINDOW<br />
ICANOPY074-WINDOW<br />
ICANOPY082-WINDOW<br />
ICANOPYSPARE001<br />
ICANOPYSPARE002<br />
ICANOPYSPARE003<br />
ICANOPYSPARE004<br />
ICANOPYSPARE005<br />
ICANOPYSPARE006<br />
ICANOPYSPARE007<br />
ICANOPYSPARE008<br />
ICANOPYSPARE009<br />
ICANOPYSPARE010<br />
ICANOPYSPARE011<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
389
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
CANOPIES - CONTINUED<br />
Rubber Strip for Pinnacle 2 Canopy 050, 051, 054<br />
Rubber Strip for Pinnacle 2 Canopy 074<br />
Rubber Strip for Pinnacle 2 Canopy 082<br />
Rubber Seal for Pinnacle 2 Canopy Side Window<br />
Paint Protection Tape 150cm for Pinnacle 2 Canopies<br />
Clamp Covers for Pinnacle 2 Canopies (6)<br />
CANOPY / ROOF RACKS<br />
Cross Bar for Trade Style Fibreglass Canopies<br />
Ironman 4x4 Logo for Cage Roof Racks<br />
Wheel Clamp to suit 18/22 Cage Roof Racks<br />
DRIVING LIGHTS<br />
H11 35W 6000k Bulb for IHID001<br />
Bull Bar Light Mount Bracket Suits Blast Series Driving Light<br />
Bull Bar Light Mount Bracket Suits Blast Series 2 Driving Light<br />
Bull Bar Light Mount Bracket Suits Comet Series Driving Light<br />
Bracket and Fasteners Kit Suits 20W Cube Lights<br />
Bracket and Fasteners Kit Suits 40W Cube Lights<br />
Bracket and Fasteners Kit Suits Bright Sabre and Bright Sabre-X Single Row Light Bars<br />
Bracket and Fasteners Kit Suits Bright Sabre Single Row Light Bars<br />
Bracket and Fasteners Kit Suits Bright Sabre Dual Row Light Bars<br />
FRIDGES<br />
Lid for 30, 40 and 50L Fridge<br />
12V Lead for Fridges (All models)<br />
Australian 240V Power Lead for Fridges (All models)<br />
European Power Lead for Fridges (All models) - While Stocks Last<br />
Internal Basket for 30L Fridge<br />
Internal Basket for 40L Fridge<br />
Internal Basket for 50L Fridge<br />
Internal LED Light Suits all Fridges<br />
Digital Control Panel for 30, 40 and 50L Fridge<br />
Control PCB for 30, 40 and 50L Fridge<br />
Compressor Control Suits all Fridges<br />
Battery Protection for 30, 40 and 50L Fridge<br />
DC Fan for 30, 40 and 50L Fridge<br />
Digital Control Panel for 65L Fridge Dual Control<br />
Digital Control Panel for 74L Fridge Single<br />
DC Fan for 65 and 74L Fridge<br />
Hinge for 65 and 74L Fridge (x 1)<br />
American Power Lead for Fridges (All models)<br />
Internal Basket Small for 65L Fridge<br />
Internal Basket Large for 65L Fridge<br />
Internal Basket Small for 74L Fridge<br />
Internal Basket Large for 74L Fridge<br />
Thermometer Probe for 30, 40 and 50L Fridge<br />
Hinge and Spring for 30, 40 and 50L Fridge Lids<br />
Thermometer Probe for 65 and 74L Fridge<br />
Thermometer Probe for 65L Freezer Side<br />
Digital Control Panel for 30, 40 and 50L Fridge (NEW)<br />
Solenoid Value for 65L Fridge<br />
INSTANT AWNINGS<br />
Awning L Mounting Brackets<br />
Awning Hinge Joint for Poles<br />
Awning Strap and Buckle<br />
ICANOPYSPARE013<br />
ICANOPYSPARE014<br />
ICANOPYSPARE015<br />
ICANOPYSPARE016<br />
ICANOPYSPARE020<br />
ICANOPYSPARE021<br />
IRRCROSSBAR001<br />
BBPART018<br />
IRRWHEEL CLAMP<br />
IHIDBULB<br />
ILEDBLASTMOUNT<br />
ILEDBLAST2MOUNT<br />
ILEDCOMETMOUNT<br />
ILED20SPAREBKTS<br />
ILED80SPAREBKTS<br />
ILBSRSPAREBKTS<br />
ILBSRWSPAREBKTS<br />
ILBDRSPAREBKTS<br />
IFRIDGESPARE001<br />
IFRIDGESPARE002<br />
IFRIDGESPARE003<br />
IFRIDGESPARE004<br />
IFRIDGESPARE005<br />
IFRIDGESPARE006<br />
IFRIDGESPARE007<br />
IFRIDGESPARE008<br />
IFRIDGESPARE009<br />
IFRIDGESPARE010<br />
IFRIDGESPARE011<br />
IFRIDGESPARE012<br />
IFRIDGESPARE013<br />
IFRIDGESPARE014<br />
IFRIDGESPARE015<br />
IFRIDGESPARE016<br />
IFRIDGESPARE017<br />
IFRIDGESPARE018<br />
IFRIDGESPARE019<br />
IFRIDGESPARE020<br />
IFRIDGESPARE021<br />
IFRIDGESPARE022<br />
IFRIDGESPARE023<br />
IFRIDGESPARE024<br />
IFRIDGESPARE025<br />
IFRIDGESPARE026<br />
IFRIDGESPARE027<br />
IFRIDGESPARE028<br />
IAWNINGSPARE001<br />
IAWNINGSPARE002<br />
IAWNINGSPARE003<br />
390 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
Awning Foot Piece with Rope<br />
Awning End Pin<br />
Awning Swivel Spacer<br />
Awning Twist Lock<br />
Awning Outer Pole 25mm - Tube Only<br />
Awning Inner Pole 22mm - Tube Only<br />
Replacement Awning Cover<br />
Awning Square Rubber Catch<br />
Awning 2.0 Horizontal External Pole<br />
Awning 2.5 Horizontal External Pole<br />
Plastic Clip for Awning Room/ Net<br />
Horizontal Pole 2m<br />
Horizontal Pole 2.5m<br />
Vertical Pole<br />
Rubber Stopper<br />
Flex Joint<br />
Light Strip and Dimmer Kit<br />
‘L’ Mounting Bracket (1)<br />
Guy Ropes and Peg Kit in Bag<br />
Poles, Ropes, Pegs to suit Awning Room<br />
Single Guy Ropes (Pair)<br />
ROOFTOP TENTS<br />
Travel Cover for Tent<br />
Mattress Cover<br />
Mounting Extrusions (x 2)<br />
Mounting Sliding Plate and Bolt<br />
Mounting Clamp<br />
Ladder Bracket (x 2)<br />
Bungee Cords (x 4)<br />
Window Rods (x 6)<br />
Straps for Tent Cover (x 2)<br />
Front Extrusion Bow<br />
Base Extrusion 1295mm<br />
Base Extrusion 1130mm<br />
Base Mid Extrusion Tongue/Groove (Pair)<br />
Tent Base Corner Piece<br />
Main Ladder<br />
Tent Fly Sheet<br />
Zip on Base For Cover<br />
Mattress<br />
Roof Top Tent Bow<br />
SIDE STEPS AND RAILS<br />
Rubber Plug to suit SSRP Big Tube Style<br />
SLIDE-AWAY ROLL UP HARD TONNEAU COVERS<br />
Slide-Away Metal Badge<br />
Slide-Away Brackets 100mm (Set of 6)<br />
Slide-Away Brackets 115mm (Set of 6)<br />
Slide-Away Brackets 45mm (Set of 6)<br />
Slide-Away Brackets 70mm (Set of 6)<br />
Slide-Away Brackets 80mm (Set of 6)<br />
Slide-Away Clutch<br />
Slide-Away ECU<br />
Slide-Away Fastener Pack<br />
Slide-Away LED Light Module<br />
Slide-Away Drive Motor<br />
Slide-Away Remote Control<br />
IAWNINGSPARE004<br />
IAWNINGSPARE005<br />
IAWNINGSPARE006<br />
IAWNINGSPARE007<br />
IAWNINGSPARE008<br />
IAWNINGSPARE009<br />
IAWNINGSPARE010<br />
IAWNINGSPARE011<br />
IAWNINGSPARE012<br />
IAWNINGSPARE013<br />
IAWNINGSPARE014<br />
IAWNINGPART001<br />
IAWNINGPART002<br />
IAWNINGPART003<br />
IAWNINGPART004<br />
IAWNINGPART005<br />
IAWNINGPART006<br />
IAWNINGPART007<br />
IAWNINGPART008<br />
IAWNINGPART009<br />
IAWNINGPART010<br />
IROOFTENTSPARE001<br />
IROOFTENTSPARE002<br />
IROOFTENTSPARE003<br />
IROOFTENTSPARE004<br />
IROOFTENTSPARE005<br />
IROOFTENTSPARE006<br />
IROOFTENTSPARE007<br />
IROOFTENTSPARE008<br />
IROOFTENTSPARE010<br />
IROOFTENTSPARE011<br />
IROOFTENTSPARE012<br />
IROOFTENTSPARE013<br />
IROOFTENTSPARE014<br />
IROOFTENTSPARE015<br />
IROOFTENTSPARE016<br />
IROOFTENTSPARE017<br />
IROOFTENTSPARE018<br />
IROOFTENTSPARE019<br />
IROOFTENTSPARE020<br />
SSRPART103<br />
ISLIDESPAREBADGE<br />
ISLIDESPAREBKT100<br />
ISLIDESPAREBKT115<br />
ISLIDESPAREBKT45<br />
ISLIDESPAREBKT70<br />
ISLIDESPAREBKT80<br />
ISLIDESPARECLUTCH<br />
ISLIDESPAREECU<br />
ISLIDESPAREFSTR<br />
ISLIDESPARELIGHT<br />
ISLIDESPAREMOTOR<br />
ISLIDESPAREREMOTE<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
391
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
SNORKELS<br />
Snorkel Mesh Inset Suits 3” and 3.5” Hat<br />
ISNORKELSPARE001<br />
Overflow Bottle Suits ISNORKEL020<br />
ISNORKELSPARE002<br />
3" Snorkel Hat ISNORKEL 3” HAT<br />
3.5" Snorkel Hat ISNORKEL 3.5” HAT<br />
4" Snorkel Hat ISNORKEL 4” HAT<br />
SUSPENSION<br />
Upper Control Arm Bush to Suit UCA001FA-2 UCAB001 ea<br />
Upper Control Arm Bush to Suit UCA041FA-2 UCAB041 ea<br />
Upper Control Arm Bush to Suit UCA041FAS-2 UCAB041S ea<br />
Upper Control Arm Bush to Suit UCA048FA-2 UCAB048 ea<br />
Upper Control Arm Bush to Suit UCA050FA-2 UCAB050 ea<br />
Droop Stop Shim to Suit UCA050FA-2 UCAP050 ea<br />
Upper Control Arm Bush to Suit UCA054FA-2 UCAB054 ea<br />
Upper Control Arm Bush to Suit UCA056FA-2 UCAB056 ea<br />
Upper Control Arm Bush to Suit UCA073FA-2 UCAB073 ea<br />
Upper Control Arm Bush to Suit UCA074FA-2 UCAB074 ea<br />
Upper Control Arm Bush to Suit UCA075FA-2 UCAB075 ea<br />
Ball Joint Assembly to Suit UCA001FA-2 UBJ001K-2 ea<br />
Ball Joint Assembly to Suit UCA041FA-2 UBJ041K-2 ea<br />
Ball Joint Assembly to Suit UCA041FAS-2 UBJ041SK-2 ea<br />
Ball Joint Assembly to Suit UCA048FA-2 UBJ048K-2 ea<br />
Ball Joint Assembly to Suit UCA050FA-2 UBJ050K-2 ea<br />
Ball Joint Assembly to Suit UCA054FA-2 UBJ054K-2 ea<br />
Ball Joint Assembly to Suit UCA056FA-2 UBJ056K-2 ea<br />
Ball Joint Assembly to Suit UCA073FA-2 UBJ073K-2 ea<br />
Ball Joint Assembly to Suit UCA074FA-2 UBJ074K-2 ea<br />
Ball Joint Assembly to Suit UCA075FA-2 UBJ075K-2 ea<br />
Ball Joint Assembly to Suit UCA090FA-2 UBJ090K-2 ea<br />
Leaf Spring 3/8” x 4” Centre Bolt 099<br />
Leaf Spring 5/16” x 4” Centre Bolt 098<br />
Leaf Spring 3/8” x 4” Centre Bolt - Extended Head 635<br />
Leaf Spring Plastic Clip Liner<br />
CLINER001<br />
Leaf Spring Plastic Anti-Friction Pad (Oval Locator)<br />
AFPAD001<br />
Leaf Spring Plastic Anti-Friction Pad (Round Locator)<br />
AFPAD002<br />
Leaf Spring 1 Degree Wedge Kit<br />
IWEDGE04<br />
Leaf Spring 2 Degree Wedge Kit<br />
IWEDGE08<br />
Leaf Spring 3 Degree Wedge Kit<br />
IWEDGE10<br />
Leaf Spring 4 Degree Wedge Kit<br />
IWEDGE12<br />
Rubber Sway Bar Chassis Bush 36mm to Suit Nissan Patrol Y62 Front<br />
ISBB60036R<br />
Rubber Sway Bar Axle Mounting Bush 27mm to Suit Nissan Patrol Y62 Rear<br />
ISBB60027R<br />
Rubber Sway Bar Chassis Bush 33mm to Suit Toyota Hilux 2015+ Front<br />
ISBB8033R<br />
Rubber Sway Bar Chassis Bush 38mm to Suit Toyota LC 200 Front<br />
ISBB20038R<br />
Rubber Sway Bar Axle Mounting Bush 33mm to Suit Toyota LC 200 Rear<br />
ISBB20033R<br />
Rubber Sway Bar End Bush to Suit Toyota LC 200 Rear<br />
ISBB200REB<br />
Rubber Sway Bar Chassis Bush 33mm to Suit Toyota LC 70 Front Diesel<br />
ISBB78933R<br />
Rubber Sway Bar End Bush to Suit Toyota LC 70 Front Diesel<br />
ISBB789REB<br />
Chassis Mounting D Bracket to Suit Toyota LC 70 Front Diesel<br />
ISBB789DB<br />
Rubber Sway Bar Chassis Bush 33mm to Suit Toyota LC 70 Front Petrol<br />
ISBB78933R<br />
Rubber Sway Bar End Bush to Suit Toyota LC 70 Front Petrol<br />
ISBB789REB<br />
Chassis Mounting D Bracket to Suit Toyota LC 70 Front Petrol<br />
ISBB789DB<br />
Rubber Sway Bar Axle Mounting Bush 30mm to Suit Toyota LC 70 Rear<br />
ISBB78930R<br />
Rubber Sway Bar End Bush to Suit Toyota LC 70 Rear<br />
ISBB789REB<br />
Axle Mounting D Bracket to Suit Toyota LC 70 Rear<br />
ISBB789DB<br />
Chassis Mounting Bracket Set to Suit Toyota LC 70 Rear<br />
ISBB789RBK<br />
392 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
SWAGS<br />
Poles to Suit Single Dome Swag (Set of 3)<br />
Poles to Suit Double Dome Swag (Set of 3)<br />
Swag Single Mattress<br />
Swag Double Mattress<br />
TOW BARS / REAR PROTECTION BARS<br />
Licence Plate Light<br />
Tow Bar Tongue and Ball<br />
Plastic Sensor Cover to suit RTB067GLS<br />
Universal Parking Sensor Holder to Suit Raid Bars (Lock Nut Style)<br />
UBP UNDERBODY MOUNTING KITS<br />
Mounting Kit for UBP019<br />
Mounting Kit for UBP019SC<br />
Mounting Kit for UBP033<br />
Mounting Kit for UBP041<br />
Mounting Kit for UBP047<br />
Mounting Kit for UBP047<br />
Mounting Kit for UBP050<br />
Mounting Kit for UBP051<br />
Mounting Kit for UBP054<br />
Mounting Kit for UBP055<br />
Mounting Kit for UBP056<br />
Mounting Kit for UBP057<br />
Mounting Kit for UBP201SY<br />
WINCHES<br />
Remote With Wireless Receiver Unit for WWB9500/ 12000<br />
Solenoid (All models)<br />
Motor for WWB9500<br />
Motor with Brake Attachment for WWB9500<br />
Motor for WWB12000 - New<br />
Motor with Brake Attachment for WWB12000<br />
Diff Breather Kit for WWB9500/ 12000<br />
Tie Bars New Shape (2 Pc) (All models)<br />
Clutch Handle (All models)<br />
Gearbox Complete for WWW9500/ WWB9500<br />
Gearbox Complete for WWW12000/ WWB12000<br />
Brush Kit For Motor (All models)<br />
Replacement Hook (All models)<br />
Drum Support Housing Motor End (All models)<br />
Drum Support Housing Gearbox End (All models)<br />
Complete Control Box With Remote (All models)<br />
Wireless Plug (All models)<br />
Winch Cam Lock Brake System for WWW9500/ 12000<br />
Winch Drum (All models)<br />
Electric Motor Gasket (All models)<br />
Control Box Lead Socket for WWB9500/ 12000<br />
Plug In Lead for WWB9500/ 12000<br />
Internal Brake Replacement for WWW9500/ 12000<br />
Ferrule and Pin for Winch Hook<br />
Winch Damper Blanket (All models)<br />
Winch Cam-Lock Brake System for WWB9500/ 12000<br />
Winch Clutch Handle<br />
Drum For Winches<br />
Drum Support Bush<br />
ISWAGPART001<br />
ISWAGPART002<br />
ISWAGSPARE001<br />
ISWAGSPARE002<br />
RTBSPARE001<br />
RTBSPARE002<br />
RTBSPARE004<br />
RAPIDPSHUNI<br />
UBP019MK<br />
UBP019SCMK<br />
UBP033MK<br />
UBP041MK<br />
UBP047MK<br />
UBP048MK<br />
UBP050MK<br />
UBP051MK<br />
UBP054MK<br />
UBP055MK<br />
UBP056MK<br />
UBP057MK<br />
UBP201SYMK<br />
WWB001<br />
WWB002<br />
WWB003<br />
WWB003B<br />
WWB004<br />
WWB004B<br />
WWB005<br />
WWB006<br />
WWB007<br />
WWB008<br />
WWB009<br />
WWB010<br />
WWB011<br />
WWB012<br />
WWB013<br />
WWB014<br />
WWB015<br />
WWB016<br />
WWB017<br />
WWB018<br />
WWB023<br />
WWB024<br />
WWB025<br />
WWB026<br />
WINCH BLANKET<br />
WWWBRAKE<br />
WWWCLUTCH<br />
WWWDRUM<br />
WWWDRUMBUSH<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
393
ACCESSORIES AND SUSPENSION<br />
Spare Parts<br />
Product Description<br />
Part No.<br />
WINCHES - CONTINUED<br />
End Plate For Gear Box<br />
End Plate For Motor<br />
Fairlead Rollers For Ironman Winch<br />
12000lb Winch Motor<br />
9500lb Winch Motor<br />
O-Ring For Inside The Drum For The Brake<br />
Wireless Remote For Winch<br />
Steel Cable Lug for WWW12000/ WWB12000<br />
Steel Cable Lug for WWW9500/ WWB9500<br />
12000lb Winch Carton<br />
9500lb Winch Carton<br />
Box for WWB9500<br />
Box for WWW9500SR<br />
Box for WWB12000<br />
Box for WWB12000SR<br />
Winch Control Extension Plug - 500mm Length<br />
Winch Control Extension Plug - 1000mm Length<br />
Winch Control Extension Plug - 1500mm Length<br />
Winch Control Box Mount - Universal Fit<br />
Winch Control Box Mount - To Suit 2022+ Next-Gen Ranger<br />
• Replacement Battery A23 - Not a Spare Part<br />
MISCELLANEOUS<br />
Air Compressor Replacement Hose<br />
Exhaust Generic Rubber Hanger (set 3) - 40-75mm<br />
WWWENDPLATE GBOX<br />
WWWENDPLATE MOTOR<br />
WWWFAIRLEAD<br />
WWWMOTOR12<br />
WWWMOTOR95<br />
WWWORING<br />
WWWREMOTE WIRELESS<br />
WWWTAG12<br />
WWWTAG95<br />
WWWCARTON12<br />
WWWCARTON95<br />
WWB019<br />
WWB020<br />
WWB021<br />
WWB022<br />
WWB030<br />
WWB031<br />
WWB032<br />
WWBCP001<br />
WWBCP110<br />
ICOMPRESSOR AIR LINE<br />
IEXH4075<br />
394 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
Product Description<br />
Part No.<br />
Product Install<br />
Time Guide<br />
ACCESSORIES AND SUSPENSION<br />
Effective 1 August 2023<br />
395
ACCESSORIES AND SUSPENSION<br />
Average Installation Times (in hours)<br />
Product Description<br />
Part No.<br />
INSTALLATION OF IRONMAN 4X4 PRODUCTS TO SUIT<br />
TOYOTA<br />
HILUX MY21<br />
FORD<br />
RANGER<br />
ISUZU<br />
D-MAX<br />
SUZUKI<br />
GJ JIMNY<br />
TOYOTA<br />
LANDCRUISER 200<br />
BULL BARS<br />
Commercial Bars 3.5 4 4.5 2.5 4<br />
Commercial Deluxe Bars 3.5 4 4.5 N/A 4<br />
Sensors/Cameras/Headlight Washers 0.5 1 0.25 N/A 1<br />
Wire in Fog Lights using OEM Loom and Switches 0.5 N/A 0.5 N/A 0.5<br />
Additional Wire in Fog Lights 1 1 1 N/A 1<br />
WINCHES<br />
Note: Winch control box relocation may be required if the vehicle is fitted with additional accessories, radar and or camera<br />
At Time of Installing Bull Bar 1.5 1.5 1.5 2 1.5 - 2<br />
Fit to Existing Bull Bar 3 3 3 4 3<br />
RECOVERY POINTS<br />
At Time of Installing Bar 0.5 0.5 0.5 0.5 0.5<br />
Fit to Existing Bar 1 1 1 1 1<br />
SIDE STEPS AND RAILS<br />
Side Steps 1.5 2 1.5 N/A 2<br />
Side Steps and Rails 2.5 3 2.5 N/A 3<br />
TOWBARS<br />
Towbar 2 2 2 N/A N/A<br />
Rear Protection Towbar 2 2 2 N/A N/A<br />
Rear Protection Towbar with Sensors 2.5 2.5 2.5 N/A N/A<br />
SUSPENSION<br />
Suspension Fitment 4 4 4 3 4.5<br />
Upper Control Arm 2 2 2 N/A 2<br />
Wheel Alignment 1 1 1 0.5 1<br />
LIGHTS<br />
Light Bar or Driving Lights on Bull Bar 1.5 1 1 1.5 1<br />
SNORKELS<br />
All Snorkels 3 3 3 2 3<br />
LONG RANGE FUEL TANKS<br />
Tanks 4 3.5 3.5 N/A N/A<br />
UNDERBODY PROTECTION KITS<br />
UBP 0.75 0.75 1 N/A 0.75<br />
CANOPIES<br />
ABS Plastic 2 2 3 N/A N/A<br />
Pinnacle Fibreglass 2 2 3 N/A N/A<br />
SLIDE-AWAY<br />
Roll Up Tonneau Cover 2 2 3 N/A N/A<br />
ROOF RACKS AND FEET<br />
Racks 1.5 1.5 1.5 1 2<br />
DRAWER SYSTEMS<br />
Twin Drawers 1 1 1 N/A 2<br />
Single Drawers 0.75 0.75 0.75 N/A 1<br />
Wing Kit 1 1 1 N/A 1<br />
396 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
ACCESSORIES AND SUSPENSION<br />
Average Installation Times (in hours)<br />
Product Description<br />
Part No.<br />
INSTALLATION OF IRONMAN 4X4 PRODUCTS TO SUIT<br />
TOYOTA<br />
LANDCRUISER 79<br />
MITSUBISHI<br />
TRITON MR<br />
TOYOTA<br />
PRADO 150<br />
NISSAN<br />
NP300 NAVARA<br />
NISSAN<br />
GU PATROL<br />
BULL BARS<br />
Commercial Bars 3 4.5 4.5 3 3<br />
Commercial Deluxe Bars 3 4.5 4.5 3 3<br />
Sensors/Cameras/Headlight Washers N/A 0.5 0.15 N/A N/A<br />
Wire in Fog Lights using OEM Loom and Switches N/A 0.5 0.15 0.5 N/A<br />
Additional Wire in Fog Lights 1 1 1 1 1<br />
WINCHES<br />
Note: Winch control box relocation may be required if the vehicle is fitted with additional accessories, radar and or camera<br />
At Time of Installing Bull Bar 1.5 1.5 1.5 1.5 1.5<br />
Fit to Existing Bull Bar 3 3 3 3 3<br />
RECOVERY POINTS<br />
At Time of Installing Bar 0.5 0.5 0.5 0.5 0.5<br />
Fit to Existing Bar 1 1 1 3 1<br />
SIDE STEPS AND RAILS<br />
Side Steps 1.5 2.5 1.5 2 1.5<br />
Side Steps and Rails 2.5 2.5 2.5 3 2.5<br />
TOWBARS<br />
Towbar N/A 2 N/A 2 N/A<br />
Rear Protection Towbar N/A 2 N/A 2 N/A<br />
Rear Protection Towbar with Sensors N/A 3 N/A 2.5 N/A<br />
SUSPENSION<br />
Suspension Fitment 3 4 4 3 2<br />
Upper Control Arm N/A 2 2 2 N/A<br />
Wheel Alignment 0.5 1 1 1 0.5<br />
LIGHTS<br />
Light Bar or Driving Lights on Bull Bar 1 1 2.5 1.5 1<br />
SNORKELS<br />
All Snorkels 3 3 3 4 4<br />
LONG RANGE FUEL TANKS<br />
Tanks N/A 3.5 N/A 3.5 N/A<br />
UNDERBODY PROTECTION KITS<br />
UBP 0.75 0.75 1 1.5 N/A<br />
CANOPIES<br />
ABS Plastic N/A 3 N/A 2 N/A<br />
Pinnacle Fibreglass N/A 3 N/A 2 N/A<br />
SLIDE-AWAY<br />
Roll Up Tonneau Cover N/A 3 N/A 2 N/A<br />
ROOF RACKS AND FEET<br />
Racks N/A 1.5 2 1.5 N/A<br />
DRAWER SYSTEMS<br />
Twin Drawers 1 1 2 1 N/A<br />
Single Drawers 0.75 0.75 1 0.7 N/A<br />
Wing Kit 1 1 1 1 N/A<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
397
Product Description<br />
Part No.<br />
398 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
Product Description<br />
Part No.<br />
GVM Upgrades<br />
CATALOGUE<br />
Effective 1 August 2023<br />
399
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT FORD EVEREST<br />
NEXT-GEN 2022+ - (PAGE 77)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1470kg 1770kg 3100kg 6250kg 3500kg<br />
Ironman 4x4 1640kg 2150kg 3500kg 6250kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load +400kg FOR003BKFGVM<br />
Foam Cell - Permanent Load +400kg FOR003CKFGVM<br />
Foam Cell - Permanent Load +400kg FOR003DKFGVM<br />
Foam Cell Pro - Temporary Load +400kg FOR003BKPGVM<br />
Foam Cell Pro - Permanent Load +400kg FOR003CKPGVM<br />
Foam Cell Pro - Permanent Load +400kg FOR003DKPGVM<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load +400kg FOR003BKFGVM1<br />
Foam Cell - Permanent Load +400kg FOR003CKFGVM1<br />
Foam Cell - Permanent Load +400kg FOR003DKFGVM1<br />
Foam Cell Pro - Temporary Load +400kg FOR003BKPGVM1<br />
Foam Cell Pro - Permanent Load +400kg FOR003CKPGVM1<br />
Foam Cell Pro - Permanent Load +400kg FOR003DKPGVM1<br />
Federal Approval TBA - OE Approval No. VTA-060309<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Coil Springs SSM Compliance Plate (pre reg. only)<br />
Strut Shock Absorbers Tyre Placard GVM Stickers<br />
400 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT FORD RANGER<br />
NEXT-GEN 2022+ - (PAGE 60)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1450kg 1960kg 3230kg 6400kg 3500kg<br />
Ironman 4x4 1640kg 2100kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
3500kg - NA<br />
3650kg - NB1<br />
6400kg<br />
3500kg<br />
UPGRADE<br />
PRE REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NA Compliance +270kg FOR010BKFGVM-NA<br />
Foam Cell - Permanent Load - NA Compliance +270kg FOR010CKFGVM-NA<br />
Foam Cell - Permanent Load - NA Compliance +270kg FOR010DKFGVM-NA<br />
Foam Cell Pro - Temporary Load - NA Compliance +270kg FOR010BKPGVM-NA<br />
Foam Cell Pro - Permanent Load - NA Compliance +270kg FOR010CKPGVM-NA<br />
Foam Cell Pro - Permanent Load - NA Compliance +270kg FOR010DKPGVM-NA<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NA Compliance +270kg FOR010BKFGVM1-NA<br />
Foam Cell - Permanent Load - NA Compliance +270kg FOR010CKFGVM1-NA<br />
Foam Cell - Permanent Load - NA Compliance +270kg FOR010DKFGVM1-NA<br />
Foam Cell Pro - Temporary Load - NA Compliance +270kg FOR010BKPGVM1-NA<br />
Foam Cell Pro - Permanent Load - NA Compliance +270kg FOR010CKPGVM1-NA<br />
Foam Cell Pro - Permanent Load - NA Compliance +270kg FOR010DKPGVM1-NA<br />
PRE REGISTRATION - 3650KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NB1 Compliance +420kg FOR010BKFGVM-NB1<br />
Foam Cell - Permanent Load - NB1 Compliance +420kg FOR010CKFGVM-NB1<br />
Foam Cell - Permanent Load - NB1 Compliance +420kg FOR010DKFGVM-NB1<br />
Foam Cell Pro - Temporary Load - NB1 Compliance +420kg FOR010BKPGVM-NB1<br />
Foam Cell Pro - Permanent Load - NB1 Compliance +420kg FOR010CKPGVM-NB1<br />
Foam Cell Pro - Permanent Load - NB1 Compliance +420kg FOR010DKPGVM-NB1<br />
POST REGISTRATION - 3650KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NB1 Compliance +420kg FOR010BKFGVM1-NB1<br />
Foam Cell - Permanent Load - NB1 Compliance +420kg FOR010CKFGVM1-NB1<br />
Foam Cell - Permanent Load - NB1 Compliance +420kg FOR010DKFGVM1-NB1<br />
Foam Cell Pro - Temporary Load - NB1 Compliance +420kg FOR010BKPGVM1-NB1<br />
Foam Cell Pro - Permanent Load - NB1 Compliance +420kg FOR010CKPGVM1-NB1<br />
Foam Cell Pro - Permanent Load - NB1 Compliance +420kg FOR010DKPGVM1-NB1<br />
Federal Approval TBA - OE Approval No. VTA-060289<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Centre Bearing Spacer Kit SSM Compliance Plate (pre reg. only)<br />
Strut Shock Absorbers U-Bolts Greasable Shackles and Pins GVM Stickers<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard Cat. 6 Side Indicators (NB1 vehicles only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
401
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT FORD RANGER<br />
PX MK III (NOT USA MODEL) 7/2018 TO 2022 - (PAGE 64)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1480kg 1850kg 3200kg 6000kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 6000kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell Shocks - Temporary Load +300kg FOR005BKFGVM1<br />
Foam Cell Shocks - Permanent Load +300kg FOR005CKFGVM1<br />
Foam Cell Pro Shocks - Temporary Load +300kg FOR005BKPGVM1<br />
Foam Cell Pro Shocks - Permanent Load +300kg FOR005CKPGVM1<br />
Federal Approval VTA-047511 - OE Approval No. VTA-043280<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Centre Bearing Spacer Kit SSM Compliance Plate (pre reg. only)<br />
Strut Shock Absorbers U-Bolts Greasable Shackles and Pins GVM Stickers<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard<br />
GVM UPGRADE TO SUIT FORD RANGER<br />
PX MK II (NOT USA MODEL) 2015 TO 6/2018 - (PAGE 68)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1480kg 1850kg 3200kg 6000kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 6000kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell Shocks - Temporary Load +300kg FOR001BKFGVM1<br />
Foam Cell Shocks - Permanent Load +300kg FOR001CKFGVM1<br />
Foam Cell Pro Shocks - Temporary Load +300kg FOR001BKPGVM1<br />
Foam Cell Pro Shocks - Permanent Load +300kg FOR001CKPGVM1<br />
Federal Approval VTA-047511 - OE Approval No. VTA-043280<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Centre Bearing Spacer Kit GVM Stickers<br />
Strut Shock Absorbers U-Bolts Greasable Shackles and Pins<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard<br />
402 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT FORD RANGER<br />
T6 PX (NOT USA MODEL) 2011 TO 2015 - (PAGE 72)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1480kg 1850kg 3200kg 6000kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 6000kg 3500kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell Shocks - Temporary Load +300kg FOR001BKFGVM1<br />
Foam Cell Shocks - Permanent Load +300kg FOR001CKFGVM1<br />
Foam Cell Pro Shocks - Temporary Load +300kg FOR001BKPGVM1<br />
Foam Cell Pro Shocks - Permanent Load +300kg FOR001CKPGVM1<br />
Federal Approval VTA-047511 - OE Approval No. VTA-043280<br />
UPGRADE<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Centre Bearing Spacer Kit GVM Stickers<br />
Strut Shock Absorbers U-Bolts Greasable Shackles and Pins<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
403
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT HOLDEN COLORADO<br />
RG 2016+ - (PAGE 94)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1450kg 1850kg 3150kg 6000kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 6000kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 400kg HOLD021CKF2GVM1<br />
Foam Cell - Permanent Load up to 400kg HOLD021DKF2GVM1<br />
Foam Cell Pro - Temporary Load up to 400kg HOLD021CKP2GVM1<br />
Foam Cell Pro - Permanent Load up to 400kg HOLD021DKP2GVM1<br />
Federal Approval VTA-050676 - OE Approval No. VTA-049276<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles and Pins<br />
Strut Shock Absorbers U-Bolts Tyre Placard<br />
Coil Springs Polyurethane Spring Bushes GVM Stickers<br />
GVM UPGRADE TO SUIT HOLDEN COLORADO<br />
RG 2012 TO 2015 - (PAGE 97)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Original Equipment (OE) 1300kg 1680kg 2900kg<br />
Ironman 4x4 1550kg 1950kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
Gross Combined Mass<br />
(GCM)<br />
5400kg - Petrol<br />
5900kg - Diesel<br />
5400kg - Petrol<br />
5900kg - Diesel<br />
Towing Capacity<br />
(Braked)<br />
2500kg - Petrol<br />
3000kg - Diesel<br />
2500kg - Petrol<br />
3000kg - Diesel<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg HOLD021CKFGVM1<br />
Foam Cell - Permanent Load up to 600kg HOLD021DKFGVM1<br />
Foam Cell Pro - Temporary Load up to 600kg HOLD021CKPGVM1<br />
Foam Cell Pro - Permanent Load up to 600kg HOLD021DKPGVM1<br />
Federal Approval VTA-050676 - OE Approval No. VTA-043669<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles and Pins<br />
Strut Shock Absorbers U-Bolts Tyre Placard<br />
Coil Springs Polyurethane Spring Bushes GVM Stickers<br />
404 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT ISUZU D-MAX<br />
2019+ (PAGE 109)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1450kg 1910kg 3100kg 5950kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 5950kg 3500kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 500kg HOLD021CKF3GVM<br />
Foam Cell - Permanent Load up to 500kg HOLD021DKF3GVM<br />
Foam Cell Pro - Temporary Load up to 500kg HOLD021CKP3GVM<br />
Foam Cell Pro - Permanent Load up to 500kg HOLD021DKP3GVM<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 500kg HOLD021CKF3GVM1<br />
Foam Cell - Permanent Load up to 500kg HOLD021DKF3GVM1<br />
Foam Cell Pro - Temporary Load up to 500kg HOLD021CKP3GVM1<br />
Foam Cell Pro - Permanent Load up to 500kg HOLD021DKP3GVM1<br />
2020-12/2021: Federal Approval VTA-051296 - OE Approval No. VTA-050736<br />
2022+: Federal Approval VTA-060553 - OE Approval No. VTA-051560<br />
UPGRADE<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles and Pins SSM Compliance Plate (pre reg. only)<br />
Strut Shock Absorbers U-Bolts Brake Hose Extension Bracket GVM Stickers<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
405
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT ISUZU D-MAX<br />
2012 TO 7/2019 - (PAGE 112 & 115)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1350kg 1870kg 2950kg - 3050kg 5950kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 5950kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 550kg HOLD021CKF1GVM1<br />
Foam Cell - Permanent Load up to 550kg HOLD021DKF1GVM1<br />
Foam Cell Pro - Temporary Load up to 550kg HOLD021CKP1GVM1<br />
Foam Cell Pro - Permanent Load up to 550kg HOLD021DKP1GVM1<br />
Federal Approval VTA-049748 - OE Approval No. VTA-043971<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles and Pins GVM Stickers<br />
Strut Shock Absorbers U-Bolts Brake Hose Extension Bracket<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard<br />
406 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT MAZDA BT50<br />
6/2020+ - (PAGE 161)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1450kg 1910kg 3100kg 5950kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3500kg 5950kg 3500kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 500kg HOLD021CKF3GVM<br />
Foam Cell - Permanent Load up to 500kg HOLD021DKF3GVM<br />
Foam Cell Pro - Temporary Load up to 500kg HOLD021CKP3GVM<br />
Foam Cell Pro - Permanent Load up to 500kg HOLD021DKP3GVM<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 500kg HOLD021CKF3GVM1<br />
Foam Cell - Permanent Load up to 500kg HOLD021DKF3GVM1<br />
Foam Cell Pro - Temporary Load up to 500kg HOLD021CKP3GVM1<br />
Foam Cell Pro - Permanent Load up to 500kg HOLD021DKP3GVM1<br />
6/2020-12/2021: Federal Approval VTA-051465 - OE Approval No. VTA-050871<br />
2022+: Federal Approval VTA-060620 - OE Approval No. VTA-051650<br />
UPGRADE<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles and Pins SSM Compliance Plate (pre reg. only)<br />
Strut Shock Absorbers U-Bolts Brake Hose Relocation Kit GVM Stickers<br />
Coil Springs Polyurethane Spring Bushes Tyre Placard<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
407
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT NISSAN NAVARA<br />
NP300 SERIES 5 2022+ - (PAGE 210)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1490kg 1850kg 3150kg 6000kg 3500kg<br />
Ironman 4x4 1500kg 2000kg 3340kg 6000kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3340KG<br />
Additional Payload<br />
Foam Cell - Temporary Load +190kg NISS058CKFGVM<br />
Foam Cell - Permanent Load +190kg NISS058DKFGVM<br />
Foam Cell Pro - Temporary Load +190kg NISS058CKPGVM<br />
Foam Cell Pro - Permanent Load +190kg NISS058DKPGVM<br />
POST REGISTRATION - 3340KG<br />
Additional Payload<br />
Foam Cell - Temporary Load +190kg NISS058CKFGVM1<br />
Foam Cell - Permanent Load +190kg NISS058DKFGVM1<br />
Foam Cell Pro - Temporary Load +190kg NISS058CKPGVM1<br />
Foam Cell Pro - Permanent Load +190kg NISS058DKPGVM1<br />
Federal Approval VTA-060724 - OE Approval No. VTA-047155<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Coil Springs Tyre Placard GVM Stickers<br />
Strut Shock Absorbers Sway Bar and Headlight Bracket Extension Kit SSM Compliance Plate (pre reg. only)<br />
408 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT SUZUKI JIMNY<br />
GJ 2018+ - (PAGE 269)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 680kg 880kg 1435kg 2735kg 1300kg<br />
Ironman 4x4 800kg 1100kg 1785kg 2735kg 1300kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 1785KG<br />
Additional Payload<br />
Nitro Gas - Temporary Load up to 350kg SUZ010BKGGVM<br />
Nitro Gas - Permanent Load up to 350kg SUZ010CKGGVM<br />
POST REGISTRATION - 1785KG<br />
Additional Payload<br />
Nitro Gas - Temporary Load up to 350kg SUZ010BKGGVM1<br />
Nitro Gas - Permanent Load up to 350kg SUZ010CKGGVM1<br />
Federal Approval VTA-050688 - OE Approval No. VTA-049434<br />
UPGRADE<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Offset Bush Kit Rubber Extended Bump Stop GVM Stickers<br />
Coil Springs Extended Brake Hose Tyre Placard<br />
Front Crossmember Drop Brackets Extended Headlight Sensor Bracket SSM Compliance Plate (pre reg. only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
409
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA HILUX<br />
2015+ EXCLUDES HILUX ROGUE - (PAGE 298 & 303)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1450kg 1700kg 3050kg 5850kg 3500kg<br />
Ironman 4x4 (3500kg) 1510kg 2000kg 3500kg 5850kg 3500kg<br />
Ironman 4x4 (3510kg) 1510kg 2000kg 3510kg 5850kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NA Compliance up to 500kg TOY077CKF1GVM<br />
Foam Cell - Permanent Load - NA Compliance up to 500kg TOY077DKF1GVM<br />
Foam Cell Pro - Temporary Load - NA Compliance up to 500kg TOY077CKP1GVM<br />
Foam Cell Pro - Permanent Load - NA Compliance up to 500kg TOY077DKP1GVM<br />
POST REGISTRATION - 3500KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NA Compliance up to 500kg TOY077CKF1GVM1<br />
Foam Cell - Permanent Load - NA Compliance up to 500kg TOY077DKF1GVM1<br />
Foam Cell Pro - Temporary Load - NA Compliance up to 500kg TOY077CKP1GVM1<br />
Foam Cell Pro - Permanent Load - NA Compliance up to 500kg TOY077DKP1GVM1<br />
PRE REGISTRATION - 3510KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NB1 Compliance up to 510kg TOY077CKFGVM<br />
Foam Cell - Permanent Load - NB1 Compliance up to 510kg TOY077DKFGVM<br />
Foam Cell Pro - Temporary Load - NB1 Compliance up to 510kg TOY077CKPGVM<br />
Foam Cell Pro - Permanent Load - NB1 Compliance up to 510kg TOY077DKPGVM<br />
POST REGISTRATION - 3510KG<br />
Additional Payload<br />
Foam Cell - Temporary Load - NB1 Compliance up to 510kg TOY077CKFGVM1<br />
Foam Cell - Permanent Load - NB1 Compliance up to 510kg TOY077DKFGVM1<br />
Foam Cell Pro - Temporary Load - NB1 Compliance up to 510kg TOY077CKPGVM1<br />
Foam Cell Pro - Permanent Load - NB1 Compliance up to 510kg TOY077DKPGVM1<br />
Federal Approval VTA-050749 (3500kg GVM) - OE Approval No. VTA-047341<br />
Federal Approval VTA-048310 (3510kg GVM) - OE Approval No. VTA-047341<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles Tyre Placard<br />
Strut Shock Absorbers U-Bolts Non-Greasable Pin Kit SSM Compliance Plate (pre reg. only)<br />
Coil Springs Polyurethane Spring Bushes Cat. 6 Side Indicators (NB1 vehicles only) GVM Stickers<br />
410 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA HILUX<br />
2005 TO 2015 - (PAGE 305)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1240kg - 1340kg 1 1520kg - 1600kg 2 2850kg 4600kg - 4750kg 3 3200kg<br />
Ironman 4x4 1540kg 1810kg 3350kg 4600kg - 4750kg 3 3200kg<br />
1<br />
Front axle updated 4 times<br />
2<br />
Single Cab and Double Cab 1600kg, Extra Cab 1520kg<br />
3<br />
1GR-FE 4750kg, 2TR-FE 4600kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
UPGRADE<br />
POST REGISTRATION - 3350KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 500kg TOY057CKFGVM1<br />
Foam Cell - Permanent Load up to 500kg TOY057DKFGVM1<br />
Foam Cell Pro - Temporary Load up to 500kg TOY057CKPGVM1<br />
Foam Cell Pro - Permanent Load up to 500kg TOY057DKPGVM1<br />
Federal Approval VTA-044780 - OE Approval No. VTA-033886<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Leaf Springs Greasable Shackles and Pins<br />
Strut Shock Absorbers U-Bolts Tyre Placard<br />
Coil Springs Polyurethane Spring Bushes GVM Stickers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
411
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA LANDCRUISER<br />
300 SERIES 2022+ - (PAGE 313)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1630kg 1930kg 3280kg 6000kg 3500kg<br />
Ironman 4x4 1795kg 2255kg 4050kg 6000kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 4050KG<br />
Additional Payload<br />
Foam Cell - Temporary Load +770kg TOY083CKFGVM<br />
Foam Cell Pro - Temporary Load +770kg TOY083CKPGVM<br />
Foam Cell Pro - Permanent Load +770kg TOY083DKPGVM<br />
POST REGISTRATION - 4050KG<br />
Additional Payload<br />
Foam Cell - Temporary Load +770kg TOY083CKFGVM1<br />
Foam Cell Pro - Temporary Load +770kg TOY083CKPGVM1<br />
Foam Cell Pro - Permanent Load +770kg TOY083DKPGVM1<br />
Federal Approval TBA - OE Approval No. VTA-051680<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Coil Springs Tyre Placard GVM Stickers<br />
Strut Shock Absorbers Spring Seat Support Kit SSM Compliance Plate (pre reg. only)<br />
412 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA LANDCRUISER<br />
200 SERIES MC 2007+ - (PAGE 315) | 200 SERIES NA 2007+ - (PAGE 315)<br />
UPGRADE<br />
Original Equipment (OE)<br />
Front Axle Rating<br />
1630kg 1<br />
1700kg 1<br />
UPGRADE<br />
Rear Axle Rating<br />
1950kg<br />
Ironman 4x4 1800kg 2250kg<br />
1<br />
Front axle upgraded January 2012<br />
2<br />
GVM upgraded January 2012<br />
UPGRADE<br />
Gross Vehicle Mass<br />
(GVM)<br />
3300kg 2<br />
3350kg 2<br />
3580kg<br />
4000kg<br />
Gross Combined Mass<br />
(GCM)<br />
6850kg<br />
6850kg<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
3500kg<br />
3550kg<br />
3500kg<br />
3550kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 4000KG<br />
Additional Payload<br />
Foam Cell Pro - MC Compliance up to 700kg TOY063CKPGVM-MC<br />
Foam Cell Pro - NA Compliance up to 700kg TOY063CKPGVM-NB1<br />
Federal Approval - (MC) VTA-050517 and (NB1) VTA-050503 - OE Approval No. MC-38469 and NA-43656<br />
POST REGISTRATION - 4000KG<br />
Additional Payload<br />
Foam Cell Pro - MC Compliance up to 700kg TOY063CKPGVM1-MC<br />
Foam Cell Pro - NA Compliance up to 700kg TOY063CKPGVM1-NB1<br />
Federal Approval (MC) VTA-050517 and (NB1) VTA-050503 - OE Approval No. MC VTA-038469 and NA VTA-043656<br />
POST REGISTRATION - 3580KG<br />
Additional Payload<br />
Foam Cell Pro - Temporary Load up to 280kg TOY063BKPGVM1<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• Upgrades NA vehicles to NB1 category (fitment of Cat. 6 side indicator lamps required)<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers Coil Springs Tyre Placard GVM Stickers<br />
Strut Shock Absorbers Cat. 6 Side Indicators (NA-NB1 vehicles only) SSM Compliance Plate (pre reg. only)<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
413
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA LANDCRUISER<br />
79 SERIES SINGLE CAB 2007 TO 11/2022 - (PAGE 327)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1480kg 2300kg 3400kg 6900kg 3500kg<br />
Ironman 4x4 1550kg 2800kg 3900kg 6900kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3900KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg TOY047CKFGVM<br />
Foam Cell - Frequent Load up to 600kg TOY047DKFGVM<br />
Foam Cell - Permanent Load up to 600kg TOY047EKFGVM<br />
Foam Cell Pro - Temporary Load up to 600kg TOY047CKPGVM<br />
Foam Cell Pro - Frequent Load up to 600kg TOY047DKPGVM<br />
Foam Cell Pro - Permanent Load up to 600kg TOY047EKPGVM<br />
POST REGISTRATION - 3900KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg TOY047CKFGVM1<br />
Foam Cell - Frequent Load up to 600kg TOY047DKFGVM1<br />
Foam Cell - Permanent Load up to 600kg TOY047EKFGVM1<br />
Foam Cell Pro - Temporary Load up to 600kg TOY047CKPGVM1<br />
Foam Cell Pro - Frequent Load up to 600kg TOY047DKPGVM1<br />
Foam Cell Pro - Permanent Load up to 600kg TOY047EKPGVM1<br />
Federal Approval VTA-045466 - OE Approval No. VTA-003477<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers U-Bolts Extended Brake Hose Tyre Placard<br />
Coil Springs Polyurethane Spring Bushes C Washer to Suit Brake Hose SSM Compliance Plate (pre reg. only)<br />
Leaf Springs Greasable Shackles and Pins Cat. 6 Side Indicators GVM Stickers<br />
414 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
UPGRADE<br />
UPGRADE<br />
UPGRADE<br />
GVM Upgrades<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA LANDCRUISER<br />
79 SERIES DUAL CAB 2012 TO 11/2022 - (PAGE 331)<br />
UPGRADE<br />
Front Axle Rating<br />
UPGRADE<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1480kg 2300kg 3300kg 6800kg 3500kg<br />
Ironman 4x4 1550kg 2800kg 3900kg 6800kg 3500kg<br />
UPGRADE<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3900KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg TOY047CKFGVM<br />
Foam Cell - Frequent Load up to 600kg TOY047DKFGVM<br />
Foam Cell - Permanent Load up to 600kg TOY047EKFGVM<br />
Foam Cell Pro - Temporary Load up to 600kg TOY047CKPGVM<br />
Foam Cell Pro - Frequent Load up to 600kg TOY047DKPGVM<br />
Foam Cell Pro - Permanent Load up to 600kg TOY047EKPGVM<br />
POST REGISTRATION - 3900KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg TOY047CKFGVM1<br />
Foam Cell - Frequent Load up to 600kg TOY047DKFGVM1<br />
Foam Cell - Permanent Load up to 600kg TOY047EKFGVM1<br />
Foam Cell Pro - Temporary Load up to 600kg TOY047CKPGVM1<br />
Foam Cell Pro - Frequent Load up to 600kg TOY047DKPGVM1<br />
Foam Cell Pro - Permanent Load up to 600kg TOY047EKPGVM1<br />
Federal Approval VTA-045466 - OE Approval No. VTA-003477<br />
UPGRADE<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers U-Bolts Extended Brake Hose Tyre Placard<br />
Coil Springs Polyurethane Spring Bushes C Washer to Suit Brake Hose SSM Compliance Plate (pre reg. only)<br />
Leaf Springs Greasable Shackles and Pins Cat. 6 Side Indicators GVM Stickers<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
415
AUSTRALIAN AND NEW ZEALAND CUSTOMERS ONLY - SUBJECT TO STATE COMPLIANCE<br />
GVM Upgrades<br />
UPGRADE<br />
UP<br />
Product Description<br />
Part No.<br />
GVM UPGRADE TO SUIT TOYOTA LANDCRUISER<br />
78 SERIES TROOP CARRIER 2007 TO 11/2022 - (PAGE 335)<br />
Front Axle Rating<br />
Rear Axle Rating<br />
Gross Vehicle Mass<br />
(GVM)<br />
Gross Combined Mass<br />
(GCM)<br />
UPGRADE<br />
Towing Capacity<br />
(Braked)<br />
Original Equipment (OE) 1480kg 2300kg 3300kg 6800kg 3500kg<br />
Ironman 4x4 1550kg 2800kg 3900kg 6800kg 3500kg<br />
These figures are presented as a guide only. Always refer to the owner’s manual for load ratings specific to the vehicle<br />
PRE REGISTRATION - 3900KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg TOY047CKFGVM<br />
Foam Cell - Frequent Load up to 600kg TOY047DKFGVM<br />
Foam Cell - Permanent Load up to 600kg TOY047EKFGVM<br />
Foam Cell Pro - Temporary Load up to 600kg TOY047CKPGVM<br />
Foam Cell Pro - Frequent Load up to 600kg TOY047DKPGVM<br />
Foam Cell Pro - Permanent Load up to 600kg TOY047EKPGVM<br />
POST REGISTRATION - 3900KG<br />
Additional Payload<br />
Foam Cell - Temporary Load up to 600kg TOY047CKFGVM1<br />
Foam Cell - Frequent Load up to 600kg TOY047DKFGVM1<br />
Foam Cell - Permanent Load up to 600kg TOY047EKFGVM1<br />
Foam Cell Pro - Temporary Load up to 600kg TOY047CKPGVM1<br />
Foam Cell Pro - Frequent Load up to 600kg TOY047DKPGVM1<br />
Foam Cell Pro - Permanent Load up to 600kg TOY047EKPGVM1<br />
Federal Approval VTA-045466 - OE Approval No. VA-003477<br />
• Only available through authorised Ironman 4x4 GVM upgrade installers<br />
• Plus engineering sign off (Post Registration Only)<br />
• Post Registration, State Approval - Vehicle must be inspected and approved by state authorised automotive engineer for issue of modification plate<br />
• GVM orders must be submitted via the GVM Portal<br />
GVM UPGRADE KIT CONTENTS<br />
Shock Absorbers U-Bolts Extended Brake Hose Tyre Placard<br />
Coil Springs Polyurethane Spring Bushes C Washer to Suit Brake Hose SSM Compliance Plate (pre reg. only)<br />
Leaf Springs Greasable Shackles and Pins Cat. 6 Side Indicators GVM Stickers<br />
416 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (Internatikonal)
Suspension<br />
Selection and<br />
Information<br />
Effective 1 August 2023<br />
417
SUSPENSION - PART SELECTION<br />
Understanding Load<br />
Suspension is not something you often see when you first look at a vehicle. But when you need it, suspension can be the single most important upgrade you<br />
make. Original equipment suspension is set up to support your vehicle for on-road conditions with a reasonable amount of weight.<br />
When you start to add vehicle accessories, attach a trailer or caravan and increase your load, the way the suspension handles the load changes. Couple that<br />
with uneven surfaces and off-road conditions, the OEM suspension can no longer take the additional strain.<br />
LOAD DISTRIBUTION<br />
1<br />
2<br />
3<br />
Load placed over the front half of the vehicle determines<br />
front spring selection<br />
Ensure total weight does not exceed manufacturers axle<br />
load limit<br />
Load placed over the rear half of the vehicle determines<br />
rear spring selection<br />
Ensure total weight does not exceed manufacturers axle<br />
load limit<br />
1 + 2 = Total weight of vehicle<br />
Ensure total weight does not exceed manufacturers<br />
GVM (gross vehicle mass)<br />
4 5<br />
Vehicle with trailer connected minus total weight of vehicle = Ball weight<br />
Ensure total weight of vehicle including ball weight does not exceed manufacturers GVM<br />
Total weight of vehicle plus trailer weight = GCM (gross combined mass)<br />
Ensure total weight of vehicle and trailer does not exceed manufacturers GCM<br />
Please note: Not all springs are available in green and some may be supplied in yellow. Please check before ordering.<br />
418 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PART SELECTION<br />
Determining Load<br />
STEP ONE<br />
LOAD?<br />
When your load changes, so should your springs.<br />
Any heavy accessories or towing load added to your vehicle, changes the handling and overall safety when driving. The vehicle’s springs must be matched to<br />
the load for optimum ride height and body control. Ironman 4x4 offer a range of springs to match the additional loads whether they are constant or temporary.<br />
When you start kitting out your vehicle, take into consideration the kerb weight and how much load you are adding, this will change what level of strength you<br />
need. Remember, you cannot exceed your GVM, but you might be able to upgrade it. (See page 363 for GVM upgrade information)<br />
Ironman 4x4 offer a range of springs matched to cater for every load scenario. To identify your spring type, start by finding your kerb weight and add your<br />
load, permanent and temporary. How much load have you added to your vehicle?<br />
5% 10% 20% 30% 45%<br />
LIGHT [A] MEDIUM [B] HEAVY [C] EXTRA [D] SUPER [E]<br />
Soft rate for small<br />
or no load<br />
Increased rate for moderate<br />
or changeable loads<br />
Heavy rate for<br />
big loads<br />
Strong rate for heavy<br />
accessories and loads<br />
Maximum rate for heavy<br />
accessories and full load<br />
PART NUMBER SUFFIX S - Standard Height (eg. TOY063S)<br />
Available for selected applications to provide enhanced performance at original vehicle manufacturers ride height.<br />
PART NUMBER SUFFIX A - Light (eg. TOY047A)<br />
Suitable for zero to light load applications, higher priority toward - Comfort with minimal increased ride height.<br />
PART NUMBER SUFFIX B - Medium (eg. TOY047B)<br />
Suitable for use in zero to medium load applications, ideal for moderately accessorised vehicles or occasional load.<br />
PART NUMBER SUFFIX C - Heavy (eg. TOY047C)<br />
Suitable for vehicles with permanent heavy accessories, higher priority towards load support, provides more control and firmer suspension.<br />
PART NUMBER SUFFIX D - Extra Heavy (eg. TOY047D)<br />
Suited only to vehicles with permanent heavy accessories combined with heavy additional load.<br />
PART NUMBER SUFFIX E - Super Heavy (eg. TOY047E)<br />
Maximum support for extra heavy loads typically commercial or mining use vehicles.<br />
All lift heights quoted within this catalogue are general estimates only, relative to new vehicle ride height. Suggested lifts are based upon the lighter<br />
of the recommended additional load. The position of added weight can affect the result.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
419
SUSPENSION - PART SELECTION<br />
Understanding Terrain<br />
STEP TWO<br />
TERRAIN?<br />
The terrain you travel most, determines what type of shock absorber is right for you! Forces generated by a loaded vehicle in rough terrain versus a lightly<br />
loaded vehicle in smooth terrain differ greatly and can be considerably higher.<br />
Creating safe and appropriate dynamic handling at higher than original weights requires careful consideration. The range of Ironman 4x4 shock absorbers<br />
are designed to cover all terrains and possess the correct amount of damping resistance to provide a safe and comfortable ride.<br />
Easy Terrain<br />
Adventurous Terrain<br />
Demanding Terrain<br />
CRC<br />
OMFORT ITRO GAS FOAM COMFORT CELL PRO FOAM COMFORT CELL NITRO GASFOAM CELL FOAM PROCELL<br />
PRO FOAM COMF C<br />
M<br />
RIDE<br />
RRAIN<br />
H<br />
SOFT<br />
SMOOTH<br />
RIDE<br />
TERRAIN<br />
FIRM<br />
SOFT<br />
ROUGH<br />
FEGR<br />
RIDE<br />
RIDE<br />
RIDE<br />
RIDE<br />
RIDE<br />
FIRM SOFT FIRM<br />
SOFT<br />
FIRM SOFT<br />
FIRMSOFT<br />
FIRM SOFT<br />
TERRAIN<br />
TERRAIN<br />
TERRAIN TERRAIN<br />
TERRAIN<br />
FE<br />
SMOOTH<br />
ROUGH SMOOTH ROUGH<br />
SMOOTH ROUGH SMOOTH<br />
ROUGH SMOOTH<br />
ROUGH SMOOTH<br />
Nitro Gas<br />
The Nitro Gas shock is the best value for<br />
affordable performance in all common<br />
conditions.<br />
Highly versatile, the shock is a big step up<br />
above OEM suspension in performance<br />
and control.<br />
• 35mm piston<br />
• 54mm body<br />
• 16mm piston rod<br />
• Twin tube construction<br />
• Nitrogen gas pressurised<br />
Foam Cell<br />
The Foam Cell shock will enhance your<br />
off-road durability and performance while<br />
still maintaining excellent on-road<br />
characteristics.<br />
Excels in off-road conditions where heat<br />
build-up is a concern, the Foam Cell shock<br />
is larger in size and holds more oil, providing<br />
a better dissipation of heat and longer<br />
lasting performance in all terrains.<br />
• 40mm piston<br />
• 60mm body<br />
• 18mm piston rod<br />
• Twin tube construction<br />
• Foam cell technology<br />
Foam Cell Pro<br />
Foam Cell Pro shock, the premium shock,<br />
built to handle anything.<br />
Originally designed to meet the demands<br />
of the armoured vehicle industry where<br />
reliability and durability are critical.<br />
Foam Cell Pro is the ultimate shock when<br />
the going gets tough. Thicker and stronger<br />
than any other shock on the market, it’s well<br />
suited to trades, fleet and serious off-roaders.<br />
• 45mm piston<br />
• 65-72mm body<br />
• 20mm piston rod<br />
• 3mm wall thickness<br />
• Twin tube construction<br />
• Foam cell technology<br />
420 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PART SELECTION<br />
Understanding Valving<br />
STEP THREE<br />
RIDE STYLE?<br />
HARD<br />
COMPRESSION<br />
HARD<br />
COMPRESSION<br />
Your preferred ride style is important to know when selecting the level of valving resistance in your shock absorbers. Ironman 4x4 shock absorbers adapt<br />
SOFT<br />
to the velocity of the compression and rebound stroke which provides the right amount of control to suit your driving style.<br />
SOFT<br />
Comfort Valving<br />
REBOUND<br />
Performance Valving<br />
REBOUND<br />
Professional Valving<br />
HARD<br />
HARD<br />
SLOW FAST SLOW<br />
NITRO GAS PROFESSIONAL NITRO GAS PROFESSIONAL NITRO GAS FOAM PROFESSIONAL CELL FOAM PROFESSIONAL CELL FOAM PROFESSIONAL CELL FOAM CELL PROFESSIONAL<br />
FOAM PROFESSIONAL CELL FOAM PROFESSI CELL<br />
HARD<br />
HARD<br />
HARD<br />
HARD<br />
HARD<br />
COMPRESSION COMPRESSION<br />
COMPRESSION COMPRESSION<br />
COMPRESSION<br />
SOFT<br />
SOFT<br />
SOFT<br />
SOFT<br />
SOFT<br />
GRC C FEC GR GRFEFEC<br />
F<br />
REBOUND REBOUND<br />
REBOUND REBOUND<br />
REBOUND<br />
HARD HARD<br />
HARD HARD<br />
HARD<br />
SLOW SLOW FAST FAST SLOW SLOW FAST FAST<br />
SLOW<br />
FAST<br />
COMFORT NITRO GAS FOAM COMFORT CELL COMFORT NITRO GAS<br />
FIRM<br />
RIDE<br />
TERRAIN<br />
ROUGH<br />
SOFT<br />
RIDE<br />
HARD HARD<br />
FIRM SOFT<br />
COMPRESSION COMPRESSION<br />
TERRAIN<br />
SMOOTH ROUGH<br />
Soft Ride -<br />
Lightly Accessorised<br />
SMOOTH<br />
SOFT SOFT<br />
The comfort range delivers REBOUND smooth REBOUND handling and<br />
less harshness for everyday use. Best suited to<br />
lighter vehicles without load, the shocks prioritise<br />
a soft comfortable ride, above HARDall HARD else.<br />
SLOW<br />
SLOW<br />
FIRM<br />
ROUGH<br />
RIDE<br />
TERRAIN<br />
SOFT<br />
NITRO GASFOAM CELL FOAM CELL COMF FOAM<br />
FIRM<br />
ROUGH<br />
RIDE<br />
TERRAIN<br />
SOFT<br />
SMOOTH<br />
SMOOTH<br />
Versatile Ride -<br />
Moderately Accessorised<br />
The performance range adapts to a wide range<br />
of driving styles. Best suited to moderately<br />
loaded vehicles with some accessories, the<br />
shocks provide a balanced comfortable ride<br />
FAST FAST<br />
with more control.<br />
FIRM<br />
ROUGH<br />
RIDE<br />
TERRAIN<br />
SOFT<br />
RIDE<br />
FIRM<br />
TERRAIN<br />
SOFT<br />
SMOOTH<br />
ROUGH SMOOTH<br />
Strong Controlled Ride -<br />
Heavily Accessorised<br />
The professional range controls body roll and<br />
reduces pitching while driving over all terrains.<br />
Best suited to heavily loaded vehicles with a<br />
higher centre of gravity, the shocks focus on<br />
maximising control and stability.<br />
FIRM<br />
RIDE<br />
TERRAIN<br />
ROUGH<br />
SOF<br />
SM<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
421
SUSPENSION - PART SELECTION<br />
Understanding GVM Upgrades<br />
GVM UPGRADE REQUIRED?<br />
If loads exceed the axle limits or gross vehicle mass (GVM) stated by the original vehicle manufacturer, a certified increase in GVM will be required.<br />
Ironman 4x4 design and manufacture a range of approved GVM upgrades for a selection of vehicles, which comply with federal and state regulations<br />
(Australia and NZ Only). See pages 373 -386 of this catalogue.<br />
Comprehensive testing is conducted by Ironman 4x4 and independent engineers to ensure maximum safety, performance and ADR compliance at the<br />
increased load carrying capacity.<br />
Ironman 4x4 has obtained Second Stage Manufacturer (SSM) status through the Department of Infrastructure Regional Development and Cities in Canberra<br />
GVM Upgrades are available through selected Ironman 4x4 Australian and NZdistributors only.<br />
ADDITIONAL LOAD<br />
Use the below guide to estimate the additional load in the vehicle. Calculate the load separated over each axle to determine the nearest spring selection<br />
based on the recommendations given within the vehicle application pages. Please Note: Weights quoted below are supplied as an approximate guide only.<br />
Bull Bar<br />
Aluminium<br />
+40kg<br />
Fuel Tank<br />
Extended Capacity<br />
+90kg<br />
Bull Bar<br />
Steel<br />
+60kg<br />
Roof Rack<br />
Steel 2200mm Tent Rack<br />
+45kg<br />
Winch<br />
With Synthetic Rope<br />
+25kg<br />
Rooftop Tent<br />
Including bedding<br />
+65kg<br />
Winch<br />
With Steel Cable<br />
+45kg<br />
Water Tank<br />
100 Litres<br />
+100kg<br />
Spare Wheel<br />
Additional<br />
+50kg<br />
Tray -100kg<br />
Aluminium<br />
Rear Bar<br />
Steel<br />
+65kg<br />
Tray<br />
Steel<br />
+400kg<br />
Canopy<br />
ABS Plastic<br />
+80kg<br />
Tool Box<br />
Average<br />
+100kg<br />
Drawer System<br />
1300mm Twin Drawers<br />
+90kg<br />
Passenger<br />
Average<br />
+80kg<br />
Battery<br />
Additional<br />
+25kg<br />
Luggage<br />
+100-300kg<br />
Fridge<br />
50 Litre<br />
+30kg<br />
Towing<br />
+100-300kg<br />
Large Overhang +30%<br />
Vehicles with large rear overhang such as tray or service bodies may amplify loads by approximately 30%.<br />
422 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PART SELECTION<br />
Suspension Kits and Correct Selection<br />
Ironman 4x4 suspension kits are a simplified way to select the appropriate components for a vehicle. Many vehicles have different suspension requirements<br />
according to added load, terrain and driver preferences.<br />
To establish the correct suspension kit, we ask the following questions:<br />
1) What is the primary usage of the vehicle?<br />
2) What accessories are on the vehicle?<br />
3) What additional loads are within the vehicle and how often are the loads present?<br />
4) What is the primary driving terrain?<br />
The Ironman 4x4 suspension kit part numbering system is designed to be read as follows:<br />
TOY047CK P 1<br />
TOY047<br />
An internal company<br />
prefix used to specify the<br />
vehicle model<br />
C<br />
Indicates spring selection<br />
S Standard<br />
(Standard Height)<br />
A Light<br />
(Comfort)<br />
B Medium<br />
(Performance)<br />
C Heavy<br />
(Constant Load)<br />
D Extra Heavy<br />
(Extra Constant Load)<br />
E Super Heavy<br />
(Extra Heavy Constant<br />
Load)<br />
K<br />
Implies this is a<br />
suspension kit<br />
P<br />
Indicates shock absorber<br />
selection<br />
G Nitro Gas<br />
F Foam Cell<br />
P Foam Cell Pro<br />
1<br />
Is used in some instances<br />
to define a variant of a<br />
vehicle<br />
Generally, as no two vehicles are alike, customising a suspension kit is recommended and can be discussed with the Ironman 4x4 team.<br />
For example, a vehicle with heavy load over the rear axle only, does not require constant load front springs, in this case a lighter front spring and heavier<br />
rear spring is the best choice.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
423
SUSPENSION - PART SELECTION<br />
Application Guide - Shock Absorbers To Suit<br />
To Suit Make To Suit Model Year<br />
Nitro Gas Foam Cell Foam Cell Pro<br />
Front Rear Front Rear Front Rear<br />
TO SUIT FIAT Fullback 2016+ 12715GR 12729GR /C /P 24715FE 24729FE /C /P<br />
TO SUIT FORD Courier / Ranger 1985 - 2011 12667GR 12095GR /C 24667FE 24095FE /C /P 45667FE 45095FE /C /P<br />
Everest UA 2015 - 6/2018 12727GR 12732GR 24727FE 24732FE 45727FE 45732FE<br />
Everest UA II 7/2018+ 12827GR 12732GR 24827FE 24732FE 45827FE 45732FE<br />
Ranger T6 PX / PXII 2011 - 6/2018 12727GR 12095GR /C 24727FE 24095FE /C /P 45727FE 45095FE /C /P<br />
Ranger PXIII (Not US Model) 7/2018+ 12827GR 12095GR /C 24827FE 24095FE /C /P 45827FE 45095FE /C /P<br />
TO SUIT GMC Suburban, Tahoe, Sierra, Yukon, Avalanche, Silverado 2007 - 2013 12807GR 12808GR<br />
Suburban, Escalade, Tahoe, Sierra, Yukon, Silverado 2014 - 2016 12809GR 12810GR<br />
TO SUIT GREAT WALL Cannon 9/2020+ 12853GR 12095GR /C 24853FE 24095FE /C /P 45853FE 45095FE /C /P<br />
TO SUIT HAVAL H9 Wagon 8/2017+ 12710GR 12804GR 24710FE 24804FE<br />
TO SUIT HOLDEN / GM Frontera 1995 - 1/1999 12667GR 12644GR 24667FE 24644FE<br />
Rodeo KB - TF 1983 - 1988 12087GR 12636GR /C /P 24087FE 24636FE /C /P<br />
Rodeo KB - TFS 1988 - 3/2003 12643GR 12636GR /C /P 24636FE /C /P<br />
Rodeo / Colorado / RA / RA7 / RC 2003 - 2012 12667GR 12636GR /C /P 24667FE 24636FE /C /P<br />
Colorado 2012 - 2020 12745GR 12636GR /C /P 24745FE 24636FE /C /P 45745FE 45636FE /C /P<br />
Colorado 7 / Trailblazer 2012+ 12745GR 12746GR /C 24745FE 24746GR /C 45745FE 45746FE /C<br />
Jackaroo Pre 1986 12087GR 12636GR /C 24087FE 24636FE /C<br />
Jackaroo 11/1986 - 1991 12087GR 12671GR 24087FE<br />
Jackaroo / Bighorn / Monterey 1992+ 12643GR 12644GR 24643FE 24644FE<br />
TO SUIT HYUNDAI Terracan 2001+ 12087GR 12637GR /C 24087FE<br />
TO SUIT ISUZU D-Max 2003 - 2012 12667GR 12636GR /C /P 24667FE 24636FE /C /P<br />
D-Max Low Ride 2WD 2012+ 12797GR 12636GR /C /P 24636FE /C /P<br />
D-Max 6/2012 - 7/2019 12745GR 12636GR /C /P 24745FE 24636FE /C /P 45745FE 45636FE /C /P<br />
D-Max 8/2019+ 12845GR 12698GR /C /P 24845FE 24698FE /C /P 45845FE 45698FE /C /P<br />
MU-X 2013 - 7/2021 12745GR 12746GR /C 24745FE 24746GR /C 45745FE 45746FE /C<br />
MU-X 8/2021+ 12845GR 12746GR /C 24845FE 24746GR /C 45845FE 45746FE /C<br />
Trooper Pre 1986 12087GR 12636GR /C 24087FE 24636FE /C<br />
Trooper 11/1986 - 1991 12087GR 12671GR 24087FE<br />
Monterey 1992+ 12643GR 12644GR 24643FE 24644FE<br />
TO SUIT JEEP Cherokee XJ 1984+ 12665GR 12666GR 24665FE 24666FE<br />
Cherokee Liberty KJ / KK 2001 - 2012 12711GR 12712GR<br />
Gladiator 5/2020+ 12851GR /C 45851FE /C 45854FE /C<br />
Grand Cherokee ZJ / ZG 1993 - 1998 12665GR 12670GR 24665FE<br />
Grand Cherokee WJ / WG 1999 - 6/2005 12774GR 12775GR<br />
Grand Cherokee WK2 2011-2016 12735GR<br />
Grand Cherokee WK2 2016+<br />
12738GR LH<br />
12738GR RH<br />
Wrangler TJ 1996 - 2/2007 12665GR 12669GR 24665FE<br />
Wrangler JK 2006+ 12751GR 12752GR 45751FE 45752FE<br />
Wrangler JK 4” Lift 2006+ 12751LGR 12752LGR 45751LFE 45752LFE<br />
Wrangler JL 2018+ 12851GR /C 12852GR /C 45851FE /C 45852FE /C<br />
/C = Comfort option available. /P = Professional option available.<br />
1<br />
Bundera / Wrangler LHS<br />
2<br />
Bundera / Wrangler RHS<br />
3<br />
45780FE, Must use Ironman coil springs TOY063<br />
424 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PART SELECTION<br />
Application Guide - Shock Absorbers To Suit<br />
To Suit Make To Suit Model Year<br />
Nitro Gas Foam Cell Foam Cell Pro<br />
Front Rear Front Rear Front Rear<br />
TO SUIT JMC Vigus 2014+ 12710GR 12650GR /C 24710FE 24650FE /C /P 45710FE 45650FE /C /P<br />
TO SUIT LAND ROVER Defender 90 / 110 / 130 Series 12080GR 12640GR 24080FE 24640FE 45080FE 45640FE<br />
Range Rover (Coil Springs) 1971 - 1995 12080GR 12640GR 24080FE 24640FE 45080FE 45640FE<br />
Discovery Series 1 1989 - 1998 12080GR 12640GR 24080FE 24640FE 45080FE 45640FE<br />
Discovery Series 2 (Coil Springs) 1999 - 2005 12776GR 12777GR 24776FE 24777FE<br />
TO SUIT LDV T60 2017+ 12745GR 12636GR /C /P 24745FE 24636FE /C /P 45745FE 45636FE /C /P<br />
TO SUIT MAHINDRA Scorpio Getaway Pik-Up / Wagon 2002 - 2012 12087GR 12749GR<br />
Scorpio Getaway Pik-Up 2012 + 12087GR 12731GR<br />
TO SUIT MAZDA B Series Bravo / BT50 1987 - 2011 12667GR 12095GR /C 24667FE 24095FE /C /P 45667FE 45095FE /C /P<br />
BT50 2011 - 5/2020 12727GR 12095GR /C 24727FE 24095FE /C /P 45727FE 45095FE /C /P<br />
BT50 6/2020+ 12845GR 12698GR /C /P 24845FE 24698FE /C /P 45845FE 45698FE /C /P<br />
TO SUIT MERCEDES-BENZ G-Wagen W460, W461, W463 1979+ 12811GR 12812GR 24811FE 24812FE<br />
G-Wagen G55 AMG 24788FE 24789FE<br />
Unimog (6 Bolt Axle) 45803FE 45803FE<br />
Unimog (10 Bolt Axle) 45802FE 45802FE<br />
X-Class 2017 - 5/2020 12716GR 12728GR 24716FE 24728FE /P 45716FE 45728FE /C /P<br />
TO SUIT MITSUBISHI Triton / L200 Pre 1993 12082GR 12636GR /C /P 24082FE 24636FE /C /P<br />
Triton ME-MJ / L200 1993 - 1996 12082GR 12636GR /C /P 24082FE 24636FE /C /P<br />
Triton MK / L200 1996 - 2006 12087GR 12698GR /C /P 24087FE 24698FE /C /P<br />
Triton ML-MN / L200 2006 - 2015 12715GR 12636GR /C /P 24715FE 24636FE /C /P<br />
Triton MQ-MR / L200 2015 - 10/2018 12715GR 12729GR /C /P 24715FE 24729FE /C /P<br />
Pajero / Montero NA-NG (Leaf) Pre 1991 12082GR 12636GR /C /P 24082FE 24636FE /C /P<br />
Pajero / Montero NA-NG (Coil) 1988 - 1991 12082GR 12645GR /C 24082FE 24645FE /C<br />
Pajero / Montero NH-NL (Leaf) 1991 - 1999 12087GR 12636GR /C /P 24087FE 24636FE /C /P<br />
Pajero / Montero NH-NL (Coil) 6/1991 - 2000 12087GR 12646GR 24087FE 24646FE<br />
Pajero / Montero NM-NX 2000+ 12713GR 12714GR 24713FE<br />
Challenger / Montero Sport PA (Leaf) 1998 - 2006 12087GR 12636GR /C /P 24087FE 24636FE /C /P<br />
Challenger / Montero Sport PA (Coil) 1998 - 2008 12087GR 12645GR /C 24087FE 24645FE /C<br />
Challenger / Pajero Sport / Montero Sport / Dakar PB 2009 - 2015 12715GR 12645GRS 24715FE 24645FES<br />
Pajero Sport 2015+ 12715GR 12645GRS 24715FE 24645FES 45715FE<br />
Delica L400 Without ECS 1994+ 12667GR 12698GR 24667FE<br />
Delica L400 With ECS 1994+ 12667GR 12671GR 24667FE<br />
TO SUIT NISSAN Patrol MQ / MK G160 Pre 1988 12075GR 12076GR<br />
Patrol GQ / GU SWB & LWB Wagon 1988 - 1998 12091GR 12094GR 24091FE 24094FE /P 45091FE /P 45094FE /P<br />
Patrol GQ / GU SWB & LWB Wagon 4” Lift 24091LFE 24094LFE /P 45091LFE /P 45094LFE /P<br />
Patrol GQ / GU SWB & LWB Wagon 6” Lift 24091LFE1 24094LFE1 45091LFE1 45094LFE1<br />
Patrol GQ Y60 Cab Chassis (Leaf) 12661GR 12648GR 24661FE 24648FE 45661FE 45648FE<br />
Patrol GU Y61 Cab Chassis (Leaf) 12091GR 12648GR 24091FE 24648FE 45091FE /P 45648FE<br />
Patrol GU Y61 Cab Chassis (Coil) 12091GR 12094GR 24091FE 24094FE /P 45091FE /P 45094FE /P<br />
Patrol GU Y61 Cab Chassis (Coil) 4” Lift 24091LFE 24094LFE /P 45091LFE /P 45094LFE /P<br />
/C = Comfort option available. /P = Professional option available.<br />
1<br />
Bundera / Wrangler LHS<br />
2<br />
Bundera / Wrangler RHS<br />
3<br />
45780FE, Must use Ironman coil springs TOY063<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
425
SUSPENSION - PART SELECTION<br />
Application Guide - Shock Absorbers To Suit<br />
To Suit Make To Suit Model Year<br />
Nitro Gas Foam Cell Foam Cell Pro<br />
Front Rear Front Rear Front Rear<br />
TO SUIT NISSAN Patrol GU Y61 Cab Chassis (Coil) 6” Lift 24091LFE1 24094LFE1 45091LFE1 45094LFE1<br />
Patrol Y62 2009+ 12740GR 12742GR 24740FE 24742FE 45740FE 45742FE<br />
Pathfinder / Terrano / Il / R20 / WD21 Pre 1995 12667GR 12636GR /C /P 24667FE 24636FE /C /P<br />
Pathfinder R51 7/2005+ 12716GR 12718GR 24716FE 24718FE<br />
Navara D21 1985 - 1996 12087GR 12636GR /C /P 24087FE 24636FE /C /P<br />
Navara D22 / NP300 (Torsion Bar) 1997+ 12791GR 12636GR /C /P<br />
Navara D40 / Xterra 2005+ 12716GR 12717GR 24716FE 24717FE /P 45716FE 45717FE /P<br />
Navara NP300 (Leaf) 2014+ 12716GR 12698GR /C 24716FE 24698FE /C /P 45716FE 45698FE /C /P<br />
Navara NP300 (Coil) 2015+ 12716GR 12728GR 24716FE 24728FE /P 45716FE 45728FE /C /P<br />
Paladin Pre 2005 12791GR 12698GR /C 24698FE /C /P<br />
TO SUIT RAM 1500 DS 2014 - 2019 45855FE 45856FE /C<br />
1500 DT 6/2018+ 45860FE 45862FE /C<br />
TO SUIT RENAULT / DACIA Duster 2010+ 12747GR 12748GR<br />
Alaskan 2017+ 12716GR 12728GR 24716FE 24728FE /P 45716FE 45728FE /C /P<br />
TO SUIT SSANGYONG Musso Q200 SWB 10/2018+ 12823GR 12824GR<br />
Musso Q201 / Q215 LWB (Coil) 10/2018+ 12823GR 12825GR<br />
Musso Q201 / Q205 / Q215 LWB (Leaf) 10/2018+ 12823GR 12826GR<br />
Musso / Korando 1996 - 2006 12667GR 12661GRS 24667FE 24661FES<br />
Rexton Y400 / Y450 2018+ 12823GR 12828GR<br />
TO SUIT SUBARU<br />
Forester - See pages 250 / 251 for listing<br />
Outback - See page 252 for listing<br />
XV Crosstrek - See page 253 for listing<br />
TO SUIT SUZUKI Jimny SN413 / GJ 1998+ 12759GR 12760GR<br />
Sierra / Samurai LJ / SJ (Leaf) 1981+ 12085GR 12086GR<br />
Vitara SWB 1988+ 12083GR 12089GR<br />
Vitara LWB 1988+ 12083GR 12658GR<br />
Grand Vitara SWB 1988 - 7/2005 12083GR 12089GR<br />
Grand Vitara LWB 1988 - 7/2005 12083GR 12658GR<br />
Grand Vitara 8/2005 - 2015 12721GR 12722GR<br />
TO SUIT TOYOTA 4Runner Gen 1, N60 (Leaf) 1988 - 1997 12088GR 12650GR /C 24088FE 24650FE /C /P<br />
4Runner / Surf Gen 2, N130 V6 (Coil) 1990 - 1997 12088GR 12637GR /C 24088FE 24637FE /C<br />
4Runner Gen 3, N180-N185 1996 - 2002 12691GR 12661GR 24691FE 24661FE 45691FE 45661FE<br />
4Runner Gen 4 & 5, N210-N280 2003+ 12710GR 12682GR /C /P 24710FE 24682FEC /P 45710FE 45682FEC /P<br />
FJ Cruiser 2006+ 12710GR 12682GRC /P 24710FE 24682FE /C /P 45710FE 45682FE /C /P<br />
Fortuner 2004 - 2015 12710GR 12743GR /C 24710FE 24743FE /C 45710FE 45743FE /C<br />
Fortuner 2015+ 12730GR 12743GR /C 24730FE 24743FE /C 45730FE 45743FE /C<br />
Hiace Series 200 2005 - 2019 12667GR 12805GR 24667FE 24805FE<br />
Hiace Series 300 2019+ 24840FE 24842FE /C<br />
Hilux Solid Front Axle 1979 - 10/1983 12639GR /C 12636GR /C /P 24639FE 24636FE /C /P<br />
Hilux Solid Front Axle 11/1983 - 11/1997 12639GR /C 12650GR /C 24639FE 24650FE /C /P<br />
/C = Comfort option available. /P = Professional option available.<br />
1<br />
Bundera / Wrangler LHS<br />
2<br />
Bundera / Wrangler RHS<br />
3<br />
45780FE, Must use Ironman coil springs TOY063<br />
426 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PART SELECTION<br />
Application Guide - Shock Absorbers To Suit<br />
To Suit Make To Suit Model Year<br />
Nitro Gas Foam Cell Foam Cell Pro<br />
Front Rear Front Rear Front Rear<br />
TO SUIT TOYOTA Hilux / Tiger / 107 / 108 / 110 / 111 / 167 1997 - 2005 12088GR 12081GR /C 24088FE 24081FE /C /P<br />
Hilux Low Ride 2WD 2005+ 12764GR 12650GR /C 24650FE /C /P<br />
Hilux / Vigo 2005 - 2015 12710GR 12650GR /C 24710FE 24650FE /C 45710FE 45650FE /C<br />
Hilux / Vigo Long Travel 2005 - 2015 12710GR 12081GR /C 24710FE 24081FE /C /P 45710FE 45081FE /C /P<br />
Hilux / Revo 2015+ 12730GR 12081GR /C 24730FE 24081FE /C /P 45730FE 45081FE /C /P<br />
Landcruiser 40 / 42 / 45 / 46 / 47 Series 1960 - 1980 12635GR /C 12636GR /C /P 24635FE /C 24636FE /C /P 45635FE 45636FE /C /P<br />
Landcruiser 60 Series Pre 1986 12637GR /C 12636GR /C /P 24637FE /C 24636FE /C /P 45637FE /C 45636FE /C /P<br />
Landcruiser 60 Series 1986+ 12637GR /C 12650GR /C 24637FE /C 24650FE /C /P 45637FE /C 45650FE /C /P<br />
Landcruiser 70 / 73 / 74 Series (Leaf/Leaf) 1984 - 1988 12637GR /C 12650GR /C 24637FE /C 24650FE /C /P 45637FE /C 45650FE /C /P<br />
Bundera 1984 - 1989 12091GR<br />
12639GRS 1<br />
12650GR 2<br />
24091FE<br />
24639FES 1<br />
24650FE 2<br />
Landcruiser ll / Prado 70 / 73 / 78 Series 1990 - 1996 12696GR 12697GR 24696FE 24697FE<br />
Landcruiser 71 Series (Coil/Leaf) 1991+ 12091GR 12081GR /C 24091FE 24081FE /C /P 45091FE /P 45081FE /C /P<br />
Landcruiser 75 Series 1984 - 1999 12637GR /C 12081GR /C 24637FE /C 24081FE /C /P 45637FE /C 45081FE /C /P<br />
Landcruiser 76 / 78 / 79 / 70 & D/Cab 2007+ 12091GR 12094GR /C 24091FE 24094FE /C /P 45091FE /P 45094FE /C /P<br />
Landcruiser 76 / 78 / 79 / 70 & D/Cab Long Travel 2007+ 24091FE 24094LFE /P 45091FE /P 45094LFE /P<br />
Landcruiser 80 / 105 Series 1990+ 12683GR 12682GR 24683FE 24682FE 45683FE 45682FE<br />
Landcruiser 80 / 105 Series 4” Lift 1990+ 24683LFE 24682LFE 45683LFE 45682LFE<br />
Landcruiser 80 / 105 Series 6” Lift 1990+ 24683LFE1 24682LFE1 45683LFE1 45682LFE1<br />
Landcruiser 100 Series IFS 1998+ 12795GR 12796GR 24795FE 24796FE 45795FE 45796FE /P<br />
Landcruiser 200 Series 2007+ 12720GR 12796GR 24720FE 24796FE 45720FE 45796FE /P<br />
Landcruiser 300 Series 2020+ 24883FE 24884FE 45883FE 45884FE /P<br />
Prado 90 / 95 Series 1996 - 10/2002 12691GR 12661GR 24691FE 24661FE 45691FE 45661FE<br />
Prado 120 Series (except Grande) 4/2003 - 10/2009 12710GR 12682GRC /P 24710FE 24682FEC /P 45710FE 45682FEC /P<br />
Prado 150 Series (except Kakadu) 2009-11/2017 12750GR 12682GRC /P 24750FE 24682FEC /P 45750FE 45682FEC /P<br />
Prado 150 Series (except Kakadu) 12/2017+ 12710GR 12682GRC /P 24710FE 24682FEC /P 45710FE 45682FEC /P<br />
Tacoma 2005+ 12710GR 12744GR 24710FE 24744FE 45710FE 45744FE<br />
Tundra 2006 - 2021 24780FE 24781FE 45780FE 3 45781FE<br />
TO SUIT TROLLER T4 1997 - 6/2014 12765GR 12765GR<br />
T4 7/2014+ 12755GR 12755GR<br />
TO SUIT UAZ Hunter 12652GR 12698GR 24652FE 24698FE<br />
Patriot 12637GRS 12698GR 24637FES 24698FE<br />
TO SUIT VOLKSWAGEN Amarok 2010+ 12725GR 12726GR<br />
/C = Comfort option available. /P = Professional option available.<br />
1<br />
Bundera / Wrangler LHS<br />
2<br />
Bundera / Wrangler RHS<br />
3<br />
45780FE, Must use Ironman coil springs TOY063<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
427
SUSPENSION - PRODUCT INFORMATION<br />
Features and Benefits<br />
NITRO GAS SHOCK ABSORBERS<br />
Gas Pressurised shock absorber boosts performance and<br />
adapts to a wide range of driving styles<br />
NITROGEN GAS PRESSURISED - Low pressure nitrogen gas<br />
dramatically reduces the likelihood of oil aeration and shock fade.<br />
35mm TEFLON BANDED PISTON - Precision shim-stack piston<br />
specifically valved by Ironman suspension engineers, banded<br />
with teflon for smooth long life operation.<br />
54mm TWIN TUBE BODY - Increased oil volume for improved<br />
cooling and endurance, Twin tube construction protects internal<br />
components from rock damage.<br />
16mm – 18mm HARD CHROME PISTON ROD - Hardened and<br />
polished, volumetrically balanced to piston size.<br />
FLEXIBLE RUBBER BUSHES - Offers quieter operation and reduces<br />
damaging side loads from shock absorber.<br />
TRIPLE-LIP HIGH PRESSURE NOK SEAL - Maximum gas and oil retention<br />
ability to withstand high displacement offroad use.<br />
SUPPLIMENTARY WELDED MOUNTS - Fusion welded and supplementary<br />
welded for maximum strength and reliability.<br />
SINGLE PIECE BILLET EYE RINGS AND STEMS - Ultra robust design<br />
prevents breakage or bending of mounts.<br />
VEHICLE SPECIFIC VALVING - Every part number is specially valved for<br />
each vehicle application, this ensures the best possible ride and handling as<br />
intended by Ironman suspension engineers.<br />
LONG TRAVEL - Suitable for standard and raised height vehicles, additional<br />
length increases wheel articulation.<br />
IMPACT RESISTANT STONE SHIELD - Steel or Polyethylene dust shield<br />
protects piston rod from impacts and road debris.<br />
FOAM CELL SHOCK ABSORBERS<br />
Premium shock absorber for superior endurance in<br />
all conditions<br />
FOAM CELL TECHNOLOGY - Micro-Cellular closed cell<br />
foam insert maximises cooling efficiency by occupying<br />
less internal space than gas within a pressurised<br />
shock absorber. Greater oil capacity and more surface<br />
area maintains lower operating temperatures.<br />
40-45mm TEFLON BANDED PISTON - Precision<br />
shim-stack piston specifically valved by Ironman<br />
suspension engineers, banded with teflon for smooth<br />
long life operation.<br />
60-72mm TWIN TUBE BODY - 50%-100% more oil volume than a gas<br />
shock absorber for superior cooling and endurance. Twin tube construction<br />
protects internal components from rock damage.<br />
18-20mm HARD CHROME PISTON ROD - Hardened and polished,<br />
volumetrically balanced to piston size.<br />
FLEXIBLE RUBBER BUSHES - Offers quieter operation and reduces<br />
damaging side loads from shock absorber.<br />
TRIPLE-LIP HIGH PRESSURE NOK SEAL - Maximum oil retention ability to<br />
withstand high displacement offroad use.<br />
SUPPLIMENTARY WELDED MOUNTS - Fusion welded then supplementary<br />
welded for higher strength and reliability.<br />
360° WELDED MOUNTS - Fusion welded then fully welded around mounting<br />
for maximum strength and reliability.<br />
SINGLE PIECE BILLET EYE RINGS AND STEMS - Ultra robust design<br />
prevents breakage or bending of mounts.<br />
VEHICLE SPECIFIC VALVING - Every part number is specially valved for<br />
each vehicle application, this ensures the best possible ride and handling as<br />
intended by Ironman suspension engineers.<br />
LONG TRAVEL - Suitable for standard and raised height vehicles, additional<br />
length increases wheel articulation.<br />
IMPACT RESISTANT STONE SHIELD - Steel or Polyethylene dust shield<br />
protects piston rod from impacts and road debris.<br />
COIL SPRINGS<br />
Available in a wide range of load ratings to<br />
maintain optimum ride height<br />
COLD COILED - CNC cold coiling ensures perfect<br />
consistency and accuracy, less heat during<br />
manufacture maintains material properties resulting<br />
in longer life.<br />
BAR PEELED - Bar peeling is the process of forming<br />
the material to an exact size before coiling, this ensures the diameter<br />
remains constant and free of flaws along its entire length.<br />
SHOT PEENED - Manipulates material surface tension to reduce stress,<br />
greatly enhances spring life.<br />
TRIPLE SCRAGGED - Each coil is fully compressed to a solid state 3 times to<br />
minimise coil settling.<br />
PROGRESSIVE AND LINEAR RATE - Used in accordance to original vehicle<br />
manufacturers preference, progressive springs increase rate as the spring<br />
compresses, linear springs maintain a consistent rate throughout its range.<br />
POWDERCOATED - All springs are electro-static powdercoated for a durable<br />
finish.<br />
LEAF SPRINGS<br />
Available in a wide<br />
range of load ratings to maintain optimum ride height<br />
INTER LEAF LINERS - Used in some applications to lower friction between<br />
leaves reducing noise and improving - Comfort.<br />
LINED BOLT CLAMPS - All Ironman springs feature bolted guide clamps for<br />
greater flex, the addition of anti-friction liners ensures noise free smooth<br />
operation.<br />
SHOT PEENED - Manipulates tension side of material to reduce stress,<br />
greatly enhances spring life.<br />
DIAMOND CUT LEAVES - Distributes load at the leaf tip and reduces<br />
interleaf friction.<br />
MILITARY WRAP - Where applicable, an additional wrap around the leaf eye<br />
protects from failure in case of damage.<br />
428 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PRODUCT INFORMATION<br />
Features and Benefits<br />
TORSION BARS<br />
Higher spring rate to<br />
support extra weight from additional vehicle accessories<br />
UP-SET FORGED ENDS - Stronger than machining alone, forging<br />
manipulates steel grain for superior strength and durability.<br />
PREMIUM MICRO-ALLOY STEEL - Exceeds OEM steel grade for ultra long<br />
life and less sag.<br />
INCREASED BAR DIAMETER - Higher spring rate better supports added<br />
accessories and balances front and rear suspension performance.<br />
X-RAY EXAMINED - Each and every Ironman Torsion Bar is X-Ray tested to<br />
eliminate risk of breakage due to material flaw.<br />
DIRECTIONAL PRE-SETTING - Torsion Bars are rotationally pre-set in their<br />
direction of installation to reduce spring settling. Each bar is marked for left<br />
or right fitment.<br />
POLYURETHANE BUSHES<br />
Provide precise spring location and enables<br />
lubrication to increase suspension flex and -<br />
Comfort<br />
INJECTION MOULDED POLYURETHANE - High density<br />
injection moulded polyurethane material ensures precise location and a<br />
durable bearing surface for your leaf springs, making them very durable in hot<br />
temperatures whilst providing a soft - Comfortable vehicle ride.<br />
GREASABLE - Polyurethane bushes are greasable to aid in longer life and<br />
ensure smooth ride and quiet operation.<br />
SPIRAL BORE AND FLANGES - To distribute lubricating grease evenly<br />
throughout the bushing surface when combined with greasable shackles and<br />
pins.<br />
SPLINES - Allows the bush to conform to irregularities and grip to the eye<br />
surface.<br />
GREASABLE SHACKLES AND PINS<br />
Enables easy re-greasing of polyurethane<br />
spring bushes<br />
QUAD-OUTLET GREASABLE - Greasable<br />
shackles provide an easy method of relubricating<br />
polyurethane bushes. Chamfered Quad-Outlet ports distribute<br />
grease liberally along the bush surface.<br />
SERVICEABLE - All Ironman shackles and pins feature a serviceable bolt<br />
together construction.<br />
ANTI-INVERSION SHACKLE - On selected models, a third pin is positioned<br />
on the shackle to protect the spring in the case of inversion.<br />
CASTER CORRECTION PLATES<br />
Used to correct caster angle after raising<br />
suspension beyond 100mm (4”)<br />
PRE-CONFIGURED CASTER CORRECTION - Fixed 5 degree offset models<br />
suit 100mm (4”) to 150mm (6”) lifted suspension.<br />
STEERING DAMPER<br />
Reduce unwanted vibration<br />
and feedback through steering system in rough conditions<br />
FOAM CELL TECHNOLOGY - Micro-Cellular closed cell foam insert allows for<br />
the horizontal mounting orientation required by a steering damper.<br />
35mm TEFLON BANDED PISTON - Precision shim-stack piston specifically<br />
valved by Ironman suspension engineers, banded with Teflon for smooth long<br />
life operation.<br />
54mm TWIN TUBE BODY - Increased oil volume improves cooling and endurance,<br />
twin tube construction protects internal components from impact damage.<br />
SUPPLEMENTARY WELDED MOUNTS - Fusion welded and supplementary<br />
welded for maximum strength and reliability.<br />
SINGLE PIECE BILLET EYE RINGS AND STEMS - Ultra robust design<br />
prevents breakage or bending of mounts.<br />
VEHICLE SPECIFIC VALVING - Every part number is specially valved for<br />
each vehicle application, this ensures the steering operation is smooth and<br />
unhindered by the effects of rough road driving.<br />
CASTER CORRECTION BUSHES<br />
Available in adjustable or fixed offset designs, used<br />
to correct caster angle after raising suspension<br />
under 100mm (4”)<br />
PRE-CONFIGURED CASTER CORRECTION - Fixed 2 degree offset models<br />
suit 50mm (2”) lifted suspension.<br />
ADJUSTABLE CASTER CORRECTION - Adjustable offset suit a wide range of<br />
lift heights up to 100mm (4”)<br />
HIGH DENSITY MATERIALS - Vehicle specific rubber or polyurethane<br />
material.<br />
ADJUSTABLE PANHARD RODS<br />
Used to correct axle shift after raising<br />
suspension. Adjustable as required to<br />
re-centralise axle to vehicle<br />
COMPETITION SPEC - 32mm solid rod used<br />
throughout.<br />
FINE THREAD ADJUSTMENT - M32 x 2mm thread ensures precision<br />
adjustment for greater accuracy.<br />
OEM STYLE RUBBER BUSHES - Maximum flex and durability. Replaceable<br />
OEM style bushes.<br />
EXTENDED SWAY BAR LINKS<br />
Recalibrates sway bar index after<br />
raising suspension.<br />
VEHICLE SPECIFIC BOLT ON DESIGN - Easy fitment, utilises OEM mounting<br />
locations.<br />
ADJUSTABLE LENGTH - Adjustable extension where possible depending on<br />
vehicle model.<br />
PRACTICAL DESIGN - Strongest construction up-spec materials to avoid<br />
bending and breaking. Rubber bushes and aircraft grade spherical bearings<br />
used where possible depending on vehicle model.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
429
SUSPENSION - PRODUCT INFORMATION<br />
Features and Benefits<br />
POLYURETHANE COIL SPRINGS SPACERS /<br />
TRIM PACKERS<br />
Available individually to adjust “side to side” or<br />
“front to back” vehicle lean due to uneven load<br />
placement<br />
INJECTION MOULDED POLYURETHANE - High density injection moulded<br />
polyurethane material ensures precise location and a durable seat with the<br />
spring.<br />
PRE-CONFIGURED THICKNESSES - Varied thicknesses allow correct<br />
selection according to the amount of lean. Provides 1:1 ratio suspension lift<br />
on solid axle vehicles.<br />
SELF LOCATING DESIGN - Raised profile locating flanges prevent packer<br />
from becoming dislodged or falling out.<br />
STRUT TRIM PACKERS<br />
For use only with Ironman 4x4 struts, available<br />
individually to adjust “side to side” or “front to<br />
back” vehicle lean due to uneven load placement.<br />
PRECISE RIDE HEIGHT TUNING - Basic steel collar design fits over Ironman<br />
4x4 struts to adjust spring seat height.<br />
PRE-CONFIGURED THICKNESSES - Varied thicknesses allow correct<br />
selection according to the amount of adjustment required. Usually provides<br />
1:2 ratio suspension lift on independent suspension vehicles.<br />
EXTENDED BRAKE HOSES<br />
Longer brake hose used with<br />
suspension lifts over 100mmm (4”).<br />
DOT SAE J1401 STANDARDS APPROVED CONSTRUCTION - OEM style<br />
reinforced rubber hose for safety.<br />
EXTENDED LENGTH - Extended length allows for greater suspension travel.<br />
ADJUSTABLE TRAILING ARMS<br />
Used to correct rear axle tilt and<br />
location after raising suspension.<br />
COMPETITION SPEC - 32mm solid rod used throughout.<br />
FINE THREAD ON-VEHICLE ADJUSTMENT - M32 x 2mm thread ensures<br />
precision adjustment for greater accuracy.<br />
OEM STYLE RUBBER BUSHES - Maximum flex and durability. Replaceable<br />
OEM compatible bushes.<br />
CASTER WEDGES<br />
Adjusts the caster angle within solid axle<br />
vehicles, or changes pinion angle to remove<br />
unwanted driveline vibration.<br />
SUITS - 60-70mm wide leaf springs. Breakaway side section can be removed<br />
for narrower springs.<br />
AVAILABLE IN - 1, 2, 3 and 4 degree increments.<br />
SWAY BARS<br />
Enhanced performance<br />
direct replacement sway<br />
bars featuring maximum bar diameter with factory compatible fitment.<br />
SHORE A 70 DURO NR - Bushes maximum flex and durability.<br />
ADJUSTABLE STEERING RODS<br />
Adjustable length rod to centralise<br />
steering wheel after suspension lift.<br />
ADJUSTABLE LENGTH - Compatible with all suspension ride heights.<br />
STRONGER CONSTRUCTION - Reduces likelihood of failure due to impact.<br />
BOLT ON STEERING DAMPER MOUNTS - Steering damper mounts can be<br />
positioned freely as required to suit suspension lift.<br />
STRUT MOUNTS<br />
Direct replacement for the OEM mounts.<br />
Facilitates the pre-assembly of complete new<br />
struts without disassembly of old unit.<br />
FULLY OEM COMPATIBLE - Easy Installation.<br />
SHORE A 80 DURO NR BUSHES & INSULATORS - Extended durability and<br />
precise location accuracy.<br />
HEAVY DUTY WASHERS - Resists deformation in extreme use.<br />
ADD-A-LEAF<br />
Additional universal tapered leaf to<br />
upgrade existing leaf springs.<br />
Eliminates suspension sag and supports<br />
additional load.<br />
Improves - Comfort and handling.<br />
Increases load carrying capability and ride height.<br />
RUBBER BUSHES<br />
Direct replacement for the OEM bushes,<br />
compatible with OEM and Ironman 4x4<br />
suspension arms.<br />
OEM STYLE RUBBER BUSHES - Easy press in replacement bushes, retains<br />
factory ride quality.<br />
SHORE A 70 DURO NR - Maximum flex and durability.<br />
PRO-FORGE CONTROL ARMS<br />
Provides corrected wheel alignment and greater<br />
operating clearance, allows for the installation of<br />
larger tyres and further increases ride height.<br />
HIGH STRENGTH FORGED ALLOY - Stronger and more durable than a cast,<br />
machined or fabricated arm.<br />
BUSHES AND BALL JOINT - Replaceable with OEM compatible or genuine<br />
components.<br />
430 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PRODUCT INFORMATION<br />
Features and Benefits<br />
SUSPENSION KITS<br />
Fully integrated suspension kits containing all required components to achieve a safe and balanced<br />
suspension performance.<br />
ALL LEAF SPRINGS KITS CONTAIN: Springs, Shock Absorbers, U-bolts and Bushes.<br />
ALL COIL SPRINGS KITS CONTAIN: Springs and Shock Absorbers.<br />
Ironman 4x4 also offer various optional components further enhancing suspension performance or geometry correction<br />
purposes, see vehicle listings for model specific details.<br />
Such components include Greasable Shackles & Pins, Steering Damper, Caster Correction, Trim Packers, Suspension Arms.<br />
LEAF / LEAF (LL) SUSPENSION KIT<br />
STRUT / LEAF (SL) SUSPENSION KIT<br />
COIL / COIL (CC) SUSPENSION KIT<br />
STRUT / COIL (SC) SUSPENSION KIT<br />
TORSION BAR / LEAF (TL) SUSPENSION KIT<br />
TORSION BAR / COIL (TC) SUSPENSION KIT<br />
Please note: Not all coil springs are available in green and some may be supplied in yellow. Please check before ordering.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
431
SUSPENSION - PRODUCT INFORMATION<br />
Load Plus Helper Springs<br />
Helper Spring Kit<br />
IRONMAN 4X4<br />
2year<br />
IRON CLAD WARRANTY<br />
Without<br />
With<br />
Maximise vehicle payload<br />
Improve safety and stability<br />
Reduce tyre, brake and<br />
suspension wear<br />
Reduce sway by up to 40%<br />
Reduce brake pitch by up to 20%<br />
Improve ride by up to 35%<br />
Reduce rear end sag by up to 20%<br />
432 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - PRODUCT INFORMATION<br />
Load Plus Helper Springs - Application Guide<br />
TO SUIT CHRYSLER / DODGE / PLYMOUTH<br />
Part No<br />
B1500, B2500, B3500 - Vans All LP7<br />
Caravan, T & C Van & Voyager<br />
All<br />
All<br />
LP7<br />
LP4<br />
D50 & Ram 50 All LP4<br />
D100, D150, D200 & D250 All LP4<br />
Dakota All LP4<br />
Durango All LP4<br />
R1500 & R2500 w/ 2.5” Leaf LP4<br />
R1500 & R2500 w/ 3.0” Leaf LP7<br />
Raider All LP4<br />
Ramcharger & Trailduster All LP4<br />
W100, W150, W200 & W250 All LP4<br />
TO SUIT DAIHATSU<br />
Feroza F300, F310 88-99 LP1<br />
Feroza II All LP4<br />
Rocky All LP1<br />
TO SUIT FIAT<br />
Fullback All LP3<br />
TO SUIT FORD / LINCOLN / MERCURY<br />
Bronco<br />
Bronco II<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
LP4<br />
LP7<br />
LP4<br />
LP7<br />
Courier / Ranger (Not USA model) All LP3<br />
Econovan & Spectron All LP1<br />
E Series Vans<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
LP4<br />
LP7<br />
Excursion All LP7<br />
Explorer w/ Leaf LP4<br />
Falcon Sedan XR-XD All LP4<br />
Falcon Panel Van XR-XH All LP4<br />
Falcon Utility 1 Tonne XR - On All LP4<br />
F Series<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
LP4<br />
LP7<br />
Mountainer & Aviator All LP4<br />
Ranger (USA model only) All LP4<br />
* Not suitable for Falcon wagon, except dedicated LPG<br />
TO SUIT GENERAL MOTORS / CHEVROLET / HOLDEN<br />
Commodore 1 Tonne All LP1<br />
Jackaroo All LP3<br />
Rodeo / Colorado / D-Max* 81-03 LP3<br />
Shuttle All LP3<br />
Utility and Van HQ-WB All LP4<br />
Astro & Safari Van w/ Leaf LP4<br />
C, K, R & V Series 1/2 & 3/4 Ton<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
LP4<br />
LP7<br />
Denali & Escalade All LP7<br />
G Series, Express 1/2 3/4 & 1 Ton<br />
Savannah Vans 1/2 3/4 & 1 Ton<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
LP4<br />
LP7<br />
LP4<br />
LP7<br />
LUV All LP3<br />
S10 Blazer & T10 All LP4<br />
S15 Jimmy, T15 & Sonoma All LP4<br />
Suburban 1/2 3/4 Ton<br />
Tahoe & Yukon<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
w/ 2.5” Leaf<br />
w/ 3.0” Leaf<br />
LP4<br />
LP7<br />
LP4<br />
LP7<br />
Silverado All LP7<br />
*Not suitable for Rodeo / Colorado / D-Max 2003+ Models with interleaf liners<br />
TO SUIT HONDA<br />
Passport w/ Leaf LP3<br />
TO SUIT INTERNATIONAL<br />
Scout All LP3<br />
TO SUIT ISUZU<br />
Amigo All LP3<br />
Hombre All LP3<br />
Pickup, P’up All LP3<br />
Rodeo w/ Leaf LP3<br />
Trooper II w/ Leaf LP3<br />
TO SUIT JEEP<br />
Cherokee & Wagoneer All LP4<br />
CJ5, CJ6 & CJ7 All LP4<br />
Commanche Pickup All LP4<br />
Gladiator Pickup All LP4<br />
J10 & J20 Series All LP4<br />
Wrangler YJ All LP4<br />
TO SUIT KIA<br />
Pregio All LP4<br />
TO SUIT LDV<br />
T60 All LP2<br />
TO SUIT MAZDA<br />
Navaho All LP4<br />
Pickups All LP3<br />
Bravo / BT50 All LP3<br />
B1800 / B2000 4x2 All LP3<br />
B2200 / B2600 4x2 4x4 All LP1<br />
E1400 All LP1<br />
E1800 All LP1<br />
E2000 All LP1<br />
E2200 All LP1<br />
TO SUIT MERCEDES BENZ<br />
MB100 99-02 LP4<br />
MB140 99-02 LP4<br />
Sprinter 98 On LP4<br />
TO SUIT MITSUBISHI<br />
Pickup All LP4<br />
Pajero / Montero w/ Leaf LP4<br />
Triton ME-MN L200 All LP4<br />
Triton MQ L200 All LP3<br />
L200 / L300 Van All LP4<br />
Starwagon / Express Van All LP4<br />
TO SUIT NISSAN<br />
Frontier All LP2<br />
X-Terra All LP2<br />
Titan All LP2<br />
Navara D21 D22 All LP3<br />
Navara D40 All LP2<br />
Navara NP300 (leaf) All LP2<br />
Urvan All LP3<br />
Patrol GQ / GU Cab / Chassis All LP4<br />
Patrol MQ / MK, G160, Y260 All LP3<br />
TO SUIT SUZUKI<br />
Sierra / Samurai All LP5<br />
TO SUIT TOYOTA<br />
To Suit Pickups All LP2<br />
To Suit T100 All LP4<br />
To Suit Tundra All LP3<br />
To Suit Hiace All LP3<br />
To Suit Hilux / 4Runner All LP2<br />
To Suit Landcruiser FJ40 / BJ40-42 60-84 LP4<br />
To Suit Landcruiser FJ / HJ60 / 61 / 62 80-90 LP4<br />
To Suit Landcruiser HJ / HZJ 75* 84-99 LP4<br />
To Suit Landcruiser HZJ 78 / 79* All LP9<br />
To Suit Landcruiser 76* All LP4<br />
To Suit Tacoma All LP2<br />
To Suit Townace All LP1<br />
* Suits Landcruiser drum brake rear models only<br />
TO SUIT VOLKSWAGEN<br />
Amarok All LP4<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
433
DRIVE<br />
LIKE A PRO<br />
Suspension kits built for<br />
Comfort - Performance - Constant Load<br />
Suspension Kit<br />
The ultimate upgrade with the most<br />
robust design suitable for all conditions<br />
Suspension Kit<br />
Colours and styles may vary between models. Prices do not include freight or fitting and are subject to change without notice.<br />
www.ironman4x4.com<br />
Family Owned Australian Company<br />
Since 1958
Suspension<br />
Specifications<br />
Effective 1 August 2023<br />
435
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Recommended Installation Times<br />
Average installation times are based on one experienced fitter with all the necessary tools and equipment<br />
SUSPENSION KITS<br />
COIL SPRINGS<br />
Front<br />
STRUT<br />
Front<br />
STRUT<br />
Front<br />
TORSION BAR<br />
Front<br />
TORSION BAR<br />
Front<br />
COIL SPRINGS<br />
Front and Rear<br />
LEAF SPRINGS<br />
Rear<br />
COIL SPRINGS<br />
Rear<br />
LEAF SPRINGS<br />
Rear<br />
COIL SPRINGS<br />
Rear<br />
LEAF SPRINGS<br />
Rear<br />
3 Hours<br />
3 Hours<br />
4 Hours<br />
3 Hours<br />
4 Hours<br />
2 Hours<br />
LEAF SPRINGS<br />
Front and Rear<br />
STRUT<br />
Front and Rear<br />
LAND ROVER MODELS<br />
VOLKSWAGEN AMAROK<br />
5 Hours<br />
4 Hours<br />
3 Hours<br />
5 Hours<br />
MITSUBISHI PAJERO<br />
2000 + 4 Hours<br />
MITSUBISHI TRITON<br />
2005 + 5 Hours<br />
SUSPENSION COMPONENTS<br />
COIL SPRINGS<br />
Pair<br />
COIL SPRINGS<br />
Pair Independent Suspension<br />
COIL SPRINGS<br />
Pair with Existing Airbags<br />
LEAF SPRINGS<br />
Pair<br />
LEAF SPRINGS<br />
Pair with Existing Airbags<br />
1 Hour<br />
2 Hours<br />
2 Hours<br />
2 Hours<br />
2.5 Hours<br />
TORSION BARS<br />
Pair<br />
STRUT SHOCK ABSORBERS<br />
Pair<br />
SHOCK ABSORBERS<br />
Pair<br />
STEERING DAMPER<br />
CASTER CORRECTION BUSHES<br />
2 Hours<br />
2 Hours<br />
1 Hour<br />
0.5 Hour<br />
2 Hours<br />
All times to be used as a guide only, times may vary depending on experience and equipment. Pre existing modifications or accessories may also increase<br />
installation times. Always allow extra time for unforeseen issues or rusted components. Always use Ironman 4x4 Suspension Installation Form to record ride<br />
height before and after, vehicle and owner details.<br />
WHEEL ALIGNMENT<br />
SOLID AXLE<br />
Wheel Alignment<br />
0.5 Hour<br />
INDEPENDENT SUSPENSION<br />
Wheel Alignment<br />
1 Hour<br />
Ironman 4x4 recommend a wheel alignment be performed after installation<br />
or within 1 week, always ensure suspension is fully settled before wheel<br />
alignment.<br />
As a minimum, toe settings will require adjustment after raising suspension.<br />
Camber and Caster settings are an important aspect and should be<br />
maintained close to manufacturers specifications.<br />
Consideration to road crown should be given.<br />
It is advisable to induce slightly more (positive caster) and (negative camber)<br />
on the kerb side wheel to help maintain directional stability.<br />
As a general rule of thumb it is recommended to adjust as follows: (Unless<br />
tyre wear dictates otherwise).<br />
Independent Front Suspension vehicles will generally result in increased<br />
toe-in when raised.<br />
Total Toe: +1mm to -1mm.<br />
Solid Front Axle vehicles generally only allow toe adjustment.<br />
Total Toe +1mm to -1mm<br />
4 Wheel Independent Suspension vehicles will require a 4 wheel<br />
alignment to ensure front and rear wheels are true to the geometric<br />
centreline of the vehicle.<br />
Rear Total Toe: +1mm to +3.5mm (Do not set with Toe Out)<br />
Front Total Toe: +1 to -1mm<br />
Optimal wheel alignment settings can vary between vehicles, the above is to<br />
be used as a guide only, different ride heights may require different settings.<br />
Always monitor tyre wear and pressures and adjust accordingly.<br />
436 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Installation Form<br />
SUSPENSION INSTALLATION FORM IRONMAN 4X4<br />
IRONMAN 4X4 SUSPENSION INSTALLATION FORM<br />
Please copy and complete this form at the time of installation.<br />
Keep in a safe place for future reference.<br />
Always ensure you have all the correct parts before beginning installation.<br />
Installing suspension often requires special tools and expert knowledge. All fitment should be performed by a qualified and experienced fitter.<br />
Always tighten bushed components after the vehicle is let down onto the ground at normal ride height, otherwise damage from torsional stresses can occur.<br />
Ironman 4x4 recommends a wheel alignment after fitment of new suspension, consideration to natural spring settling should be taken into account before alignment is done.<br />
Always adhere to vehicle manufacturers torque specification when tightening fasteners.<br />
Always grease polyurethane bushes prior to fitment, Ironman 4x4 recommends a molybdenum based grease or grease specified for polyurethane.<br />
If necessary, brake proportioning valve should only be adjusted and tested by a qualified brake specialist.<br />
Further ADAS safety systems may need to be recalibrated by a qualified service technician.<br />
YOUR DETAILS<br />
Name:<br />
Email:<br />
Phone:<br />
Invoice:<br />
VEHICLE DETAILS<br />
Make: Model: VIN / Reg No:<br />
Odometer:<br />
Engine Type:<br />
Pre-Existing Modifications (Please Circle Items Fitted)<br />
No Accessories<br />
Bull Bar<br />
Winch<br />
Underbody Protection<br />
Recovery Points<br />
Side Steps<br />
Side Rails<br />
Tow Bar Only<br />
Long Range Fuel Tank<br />
Slide-Away Roll Up Tonneau<br />
Awning<br />
Rooftop Tent<br />
Body Type:<br />
Rear Drawers<br />
Fridge<br />
Dual Battery System<br />
Roof Rack<br />
Canopy<br />
Service Body<br />
Rear Protection Bumper<br />
Water Tank<br />
SUSPENSION COMPONENT DETAILS<br />
Item Part No. Batch No. Item Part No. Batch No.<br />
1<br />
11<br />
2<br />
12<br />
3<br />
13<br />
4<br />
14<br />
5<br />
15<br />
6<br />
16<br />
7<br />
17<br />
8<br />
18<br />
9<br />
19<br />
10<br />
20<br />
NOTES AND COMMENTS<br />
SUSPENSION MEASUREMENTS<br />
Actual Spring Measurements (mm)<br />
Left Side<br />
Front<br />
SPRINGS<br />
Free Height Camber<br />
mm<br />
Rear<br />
Right Side<br />
Pre-Fitment Measurements (mm)<br />
Rim to Guard<br />
Left Side<br />
Front<br />
BEFORE<br />
Wheel Rim Size<br />
mm<br />
Rear<br />
Right Side<br />
Post-Fitment Measurements (mm)<br />
(After Product Fitment) Rim to Guard<br />
Ensure this is completed after a test drive and on a level surface<br />
Left Side<br />
Right Side<br />
Front<br />
AFTER<br />
Test Drive<br />
mm<br />
Rear<br />
POST INSTALLATION INSPECTION<br />
TICK<br />
All fitting, fasteners and wheels have been<br />
tensioned to the correct manufacturers<br />
specifications and marked with a paint pen<br />
where appropriate.<br />
PRINT NAME<br />
INSTALLERS NAME:<br />
SIGNATURE:<br />
DATE OF INSPECTION:<br />
PRINTED FORM COMPLETED AND UPLOADED INTO ONLINE SUSPENSION FORM<br />
COMPLETED:<br />
All measurements to be taken prior to installation, immediately after initial test drive and again at 500km check.<br />
All vehicle height measurements to be taken from lower of wheel rim to guard unless otherwise stated.<br />
Up to 10mm height reduction in springs can be considered normal settling over time.<br />
Suspension product warranty period is 4 years or unlimited km, GVM warranty period is 2 years or 40,000km unless otherwise stated.<br />
SIF/281122 Rev.5<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
437
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Coil Springs<br />
COIL SPRING MEASUREMENT REFERENCE<br />
MATERIAL DIAMETER<br />
END I/D<br />
FREE HEIGHT<br />
Part Number Material Free Height End I/D<br />
Spring Rate<br />
N/mm<br />
Spring Rate<br />
lb/in<br />
FOR001A 17 372 81 115 656<br />
FOR001B 17.5 375 81 124 708<br />
FOR001C 18 373 81 136 776<br />
FOR001S 17.5 355 81 124 708<br />
FOR003B 18 505 90/135 40-56 228-320<br />
FOR003C 18 515/520 90/135 56 320<br />
FOR003S 18 475 90/135 40-56 228-320<br />
FOR005A 17.5 381 81 118 673<br />
FOR005B 18 381 81 126 719<br />
FOR005C 18 387 81 132 753<br />
FOR005S 18 365 81 126 719<br />
FOR010A 18.8 422 71/91 100 570<br />
FOR010B 19.2 420 71/91 108 615<br />
FOR010C 19.5 420 71/91 119 684<br />
FOR013A 18.5 450 71/95 90 513<br />
FOR013B 19 439 71/95 100 570<br />
FOR013C 19.2 440 71/95 110 627<br />
FOR015A 18.5 466 71/95 90 513<br />
FOR015B 19 454 71/95 100 570<br />
FOR015C 19.2 454 71/95 110 627<br />
FOR019A 17 460 79/90 60/70 342/399<br />
FOR019B 17 450 79/90 65/75 371/428<br />
FOR019C 17.5 450 79/90 70/80 399/456<br />
FOR020A 16 510 79/90 40/50 228/285<br />
FOR020B 16.5 500 79/90 50/60 285/342<br />
FOR020C 17 495 79/90 60/70 342/399<br />
HOLD008B 16.4 425 104 43 246<br />
HOLD008C 17 420 106 48 274<br />
HOLD020A 16.5 382 66/76 100 571<br />
HOLD020B 17 375 66/76 110 628<br />
HOLD020C 18 370 66/76 127 725<br />
HOLD020S 17 362 66/76 100 571<br />
HOLD022A 15 400 66 40 228<br />
HOLD022B 16 410 65 47 269<br />
HOLD022C 17 415 65 58 331<br />
HOLD022S 15 380/375 65 40 228<br />
HOND001B 13 360/355 61/70 52 297<br />
HOND002B 13.5 420 72/79 40 229<br />
HYUND003B 17 407 148 33 189<br />
IMAZ001B 16 395 102 49 280<br />
JEEP003B 15 432/436 65/100 37 211<br />
JEEP006B 14 380/375 62/102 32 183<br />
JEEP007B 15 440/435 66/100 36 206<br />
JEEP008B 16 345/335 72 35 200<br />
Part Number Material Free Height End I/D<br />
Spring Rate<br />
N/mm<br />
Spring Rate<br />
lb/in<br />
JEEP012B 15 420/410 98 39 223<br />
JEEP012C 15 440/430 98 38 217<br />
JEEP013B 16 370/360 75 43 246<br />
JEEP014B 16.5 375 82 78 446<br />
JEEP014C 16.5 382 82 78 446<br />
JEEP015B 17 323 85/115 38 217<br />
JEEP016B 15.5 468 70/102 38 217<br />
JEEP017B 15 460/450 73.5/103 32 183<br />
JEEP017C 15.5 460/450 73.5/103 36 206<br />
JEEP018A 15.5 388 52/103 40 229<br />
JEEP018B 16 388 52/103 45 257<br />
JEEP019B 15 500 73/103 32 183<br />
JEEP020B 16 417 56/103 43 246<br />
JEEP021EA 17 420 58.5/95 61 349<br />
JEEP025B 15.5 448 65/88 57 326<br />
JEEP025C 15.5 463 65/88 57 326<br />
JEEP026B 20 368 55/90 114 650<br />
JEEP026C 21 365 55/90 154 879<br />
JEEP029A 14 443 74/102 27 154<br />
JEEP029B 14 455/450 74/102 27 154<br />
JEEP029C 14 475/480 74/102 27 154<br />
JEEP030A 15 388/393 71/78 28 160<br />
JEEP030C 16 415/420 71/78 36 206<br />
JEEP031B 15 505 74/102 27 154<br />
JEEP032B 16 520 65/130 29 166<br />
JEEP032C 17 525 65/130 36 206<br />
JEEP032D 19 520 65/130 44 251<br />
JEPP030B 16 395/400 71/78 31 177<br />
KIA007B 16 387 79/129 35 201<br />
LADA001B 16 285 92 89 509<br />
LADA002B 14 435 100 32 183<br />
LAND005B 17 400 118 41.1 535<br />
LAND006B 20 405 134 81 462<br />
LAND006C 21 440 134 81.9 468<br />
LAND007B 16 390/382 118 41 234<br />
LAND008B 17 440 134 36.6 209<br />
LAND009B 16 405/395 117 36 206<br />
LAND011B 17 425/420 117 46-53 262-302<br />
LAND011C 18 425/420 118 56-64 319-365<br />
LAND014B 15 410/390 117 30 171<br />
LAND019B 17 415 90 83 474<br />
LAND019C 17 427 90 83 474<br />
LAND020B 21 402 80/100 82 469<br />
LAND020C 21 415 80/100 88 503<br />
438 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Coil Springs<br />
Part Number Material Free Height End I/D<br />
Spring Rate<br />
N/mm<br />
Spring Rate<br />
lb/in<br />
MAH003B 15 405 97 46 263<br />
MERC015B 14.5 495/485 110 28 160<br />
MERC016B 18 445/433 140 28-44 159-251<br />
MERC020B 15 498 111 30.2 172<br />
MERC021B 12, 15, 16 & 18 470 140 20-40 114-228<br />
MITS020B 17 405/400 145 34 194<br />
MITS020C 18 420 148 39 223<br />
MITS022B 16 410/400 145 27 154<br />
MITS025B 17 390 124 45 257<br />
MITS034B 16 367 140 35 200<br />
MITS035B 14 315/305 120 40 229<br />
MITS038B 19 323 72/93 141 806<br />
MITS038C 19 336 72/93 141 806<br />
MITS039A 21 330/320 113 136 777<br />
MITS039B 21 350/340 113 136-166 777-948<br />
MITS039C 22 335 113.5 162-196 925-1119<br />
MITS040A 17 325 64/93 105 600<br />
MITS040B 18 325 64/92 110 628<br />
MITS040C 18 330 64/92 110 628<br />
MITS040S 18 310 64/93 118 674<br />
MITS042A 17 380 145 32 183<br />
MITS042B 17 403 145 32 183<br />
MITS042C 18 342 92/67 110 628<br />
MITS042S 17 360 145 32 183<br />
MITS045B 18 335 92/67 110 628<br />
MITS045C 18 335 92/67 110 628<br />
NISS007B 16 415/400 89/122 36.9 211<br />
NISS008B 17 490/480 139 33 189<br />
NISS009B 17 410/387 87/122 46 263<br />
NISS009C 18 415/398 89/122 58 331<br />
NISS010B 19 468/448 139 50 286<br />
NISS010C 19 488/470 139 46 263<br />
NISS018B 14 427 106 34 194<br />
NISS020B 19 490/480 139 50 286<br />
NISS020C 20 475/458 139 60 343<br />
NISS020D 22 475/453 139 85 486<br />
NISS024B 17 425/410 87/122 46 263<br />
NISS026B 18 484/469 87/122 48 274<br />
NISS027B 20 535/521 139 52 297<br />
NISS027C 21 552/540 139 70 400<br />
NISS034B 16 400 119/146.5 28 160<br />
NISS035B 15 370 126 29 166<br />
NISS038B 15 325 134/146 36 206<br />
NISS039B 15 325 114/146 36 206<br />
NISS040A 16 375 81 89 508<br />
NISS040B 17 370 81 97 554<br />
NISS040C 17 380 81 97 554<br />
NISS040D 17.5 380 81 96.7 552<br />
NISS042B 19 443 119 75 429<br />
NISS042C 20 443 119 90 514<br />
NISS043B 19 525/510 87/122 48 274<br />
NISS044B 21 590/575 139 49 280<br />
NISS044C 22/18 585/570 139/132 74 422<br />
NISS045A 20 373 101 135 771<br />
NISS045B 20 385 101 135 771<br />
NISS045C 20 390 101 135 771<br />
Part Number Material Free Height End I/D<br />
Spring Rate<br />
N/mm<br />
Spring Rate<br />
lb/in<br />
NISS045EA 21 385 101 154 878<br />
NISS045EA2 21 380 100 176 105<br />
NISS046A 21 515 119 90 514<br />
NISS046B 21 522 119 90 514<br />
NISS046C 21.5 528 119 99 566<br />
NISS046EA 22 525 121 97 556<br />
NISS046EA1 23 533 121 119 679<br />
NISS046EA2 23 528 119 140 800<br />
NISS058A 16 445 84/121.5 35-45 200-256<br />
NISS058B 16 445 84/121.5 35-60 200-342<br />
NISS058C 18 445 84/121 57 325<br />
NISS058D 18.5 445 85/122 74 423<br />
RAM015A 19 405 70/85 103 588<br />
RAM015B 19 410 70/85 105 599<br />
RAM015C 19 410 70/85 113 645<br />
RAM016A 16 485 65/111.6 37 211<br />
RAM016B 17 495 65/112 44 251<br />
RAM016C 19 505 65/112 63 359<br />
REN001B 13.5 410 99.5/117.5 30 171<br />
REN002B 14 395 99/117 35 200<br />
SSANG002B 16 410 116 41 234<br />
SSANG003B 17 312 60/99 91 519<br />
SSANG003C 17 319 60/99 93 531<br />
SSANG004B 15 375 114.1 42 239<br />
SSANG004C 16 375 114 50 285<br />
SSANG006B 15 395 114.1 42 239<br />
SSANG006C 16 395 114 50 285<br />
SSANG010B 17 298 65/88 123 702<br />
SUB001B 15 350 121/143 31 177<br />
SUB002B 15.5 345/340 128 38.28 219<br />
SUB003B 15.5 355 123/144 30 171<br />
SUB004B 15 365 99/135 39 223<br />
SUB005B 16 298 124/144 53 301<br />
SUB006B 13.5 343 84 50 284<br />
SUB014B 13 390 83.6/77.6 35 199<br />
SUZ003B 16 280 70/80 102 582<br />
SUZ004B 12 345 70/82 25.4 145<br />
SUZ005B 16 290 80.5/70.5 103 589<br />
SUZ006B 13 340 72/82 33 189<br />
SUZ008B 11 325/320 70/82 27 154<br />
SUZ009B 12 372 75/82.5 27 154<br />
SUZ009C 12 387 75.5/82 27 154<br />
SUZ010B 12 340/320 75/84 30.9 176<br />
SUZ010C 12.5 363/343 75/84 36 205<br />
SUZ011B 12 335 75/84 30.9 176<br />
SUZ011C 12.5 350 75/84 36 205<br />
SUZ013B 12.5 345 62/80 33 189<br />
SUZ015B 16 320 72/82 86 491<br />
SUZ016B 12.5 360 62/80 33 189<br />
SUZ017B 16 340 72/82 86 491<br />
SUZ018B 14 360 63/96 35 200<br />
SUZ019B 16 381 125 42 240<br />
SUZ019C 16 395 125 42 240<br />
SUZ020A 16.5 363 72 72 440<br />
SUZ020B 17 368 72 88 503<br />
SUZ020C 17 378 72 88 503<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
439
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Coil Springs<br />
Part Number Material Free Height End I/D<br />
Spring Rate<br />
N/mm<br />
Spring Rate<br />
lb/in<br />
TOY012C 19 515/520 84/119 49 280<br />
TOY013B 18 485/495 108/140 40 229<br />
TOY013C 20 490/497 108/140 57 326<br />
TOY013D 21 490/495 108/140 72 411<br />
TOY017A 16 470 90 54-60 308-342<br />
TOY017B 16 463 90 59 337<br />
TOY017EA 18 450 90 88.9 507-619<br />
TOY017S 16 455 90 54-60 308-342<br />
TOY018B 14 395/380 86/100 35 200<br />
TOY019B 16 420/405 86/125 38.2 218<br />
TOY023B 16 395/390 103/133 31 177<br />
TOY023C 17 375/370 103/134 38.2 218<br />
TOY024B 17 480/485 81/116 41 234<br />
TOY024C 17 500/505 82/117 41 234<br />
TOY025B 18 473/483 108/139 40 229<br />
TOY025C 19 460/475 107/139 48 274<br />
TOY025D 22 470/478 108/140 70 400<br />
TOY038B 16 348/357 67/76 108 617<br />
TOY038C 17 357 67/76 133 760<br />
TOY039A 15 398 74/114 31-36 177-205<br />
TOY039B 15 410 74/114 31-36 177-206<br />
TOY039C 17 385 74/114 45-51 256-291<br />
TOY046A 16 470 86/100 50 286<br />
TOY046B 17 463 86/100 57 325<br />
TOY046C 17.5 465 85.5/100 60 342<br />
TOY046D 18 455 85/100 71 405<br />
TOY046EA 19 500 100/85 76 434<br />
TOY046EA1 20 490 99/84 93 532<br />
TOY048B 14 438 100 34 194<br />
TOY048C 14.5 428 100 39 223<br />
TOY049B 17 450 87/125 34 194<br />
TOY049C 18 440 87/125 44 251<br />
TOY055A 16.5 380 66/76 106 606<br />
TOY055B 17 380 66/76 117 669<br />
TOY055C 18 373 66/76 143 817<br />
TOY055EA 19 365 66/76 171 975<br />
TOY055EA1 19 365 66/76 171 975<br />
TOY056A 16.5 400 83.5/130.5 41 234<br />
TOY056B 17 395 83/130 49 280<br />
TOY056C 18 392 85/129 62 354<br />
TOY060B 20 614/622 84/119 44 251<br />
TOY061B 21 627/637 108/140 43 246<br />
TOY061C 22 565/572 108/140 68 388<br />
TOY063A 19 455/445 74/89 102 583<br />
TOY063B 19 475/465 74/89 102 583<br />
TOY063C 19 485/475 74/89 102 583<br />
TOY063EA 20 445/435 89/73 117 668<br />
TOY063EA1 21 435 74/89 136 775<br />
TOY063EA2 22 430 87/73 186 1064<br />
TOY063S 19 425/415 74/89 113 645<br />
TOY064A 19 440/425 108/144 47 269<br />
TOY064B 19 470/455 108/144 47 269<br />
TOY064C 21 465/475 108/144 65 371<br />
TOY064D 22 465 107/144 80 456<br />
TOY064EA 20 475/465 108/144 50 286<br />
TOY064EA1 24 427 105/144 113 645<br />
Part Number Material Free Height End I/D<br />
Spring Rate<br />
N/mm<br />
Spring Rate<br />
lb/in<br />
TOY064EA2 25 435 108/140 126 718<br />
TOY064S 18 457/442 108/144 42 240<br />
TOY065A 18 390 66/76 126 720<br />
TOY065B 18 382 66/76 136 775<br />
TOY065C 18 380 66/76 145 827<br />
TOY067B 18 300 82/122 90 514<br />
TOY069B 17 420 83/130 48 274<br />
TOY070B 19.5 430 66/89 132 754<br />
TOY070C 19.5 437 66/89 132 754<br />
TOY070EA 22 390 63/88 189 1079<br />
TOY072B 18 365 135/107 59 336<br />
TOY072EA 19 380 107/135 69 393<br />
TOY076C 18 388 140 58 331<br />
TOY079B 17.5 525 101/86 54 308<br />
TOY080A 15 415 114 30 171<br />
TOY081B 19.2 475 88 102 570<br />
TOY081C 19.2 485 88 102 570<br />
TOY082A 14.5 440 54/61 35 200<br />
TOY082B 15 429 54/61 40 228<br />
TOY082C 15.8 433 54/61 49 285<br />
TOY082D 16.5 435 54/61 60 342<br />
TOY083A 17 445 82/87 80 456<br />
TOY083B 18 435 82/87 98 560<br />
TOY083C 19 433 82/87 116 660<br />
TOY083EA 19.2 400 82/87 124 712<br />
TOY083EA1 20.2 405 82/87 148 850<br />
TOY083EA2 21.2 395 82/87 194 1100<br />
TOY084A 18 488 105/114 30/40 170/230<br />
TOY084B 18 480 105/114 40 230<br />
TOY084B1 19 488 105/114 45 260<br />
TOY084C 20 480 105/114 57 325<br />
TOY084D 21 480 105/114 70 400<br />
TOY084EA 21.2 438 105/114 75 428<br />
TOY084EA1 22 438 105/114 85 485<br />
TOY084EA2 23 438 105/114 100 570<br />
TOY085A 19 448 88/82 109 620<br />
TOY085B 20 429 88/82 133 760<br />
TOY085C 20.2 417 88/82 144 820<br />
TOY086A 19 448 88/82 109 620<br />
TOY086B 20 429 88/82 133 758<br />
TOY086C 20.2 417 88/82 144 820<br />
TOY087A 18 504 105/114 28 160<br />
TOY087B 18 464 105/114 40 228<br />
TOY088A 19 436 88/82 109 620<br />
TOY088B 20 416 88/82 133 760<br />
TOY088C 20.2 418 88/82 144 820<br />
TOY089A 19 436 88/82 109 620<br />
TOY089B 20 416 88/82 133 758<br />
TOY089C 20.2 418 88/82 144 820<br />
TROL001B 15.5 390 94 58 331<br />
TROL002B 15.5 430 102 39 223<br />
TROL003B 15.5 395 95 52 297<br />
TROL004B 15 435 99 38 216<br />
VOLKS001B 17.5 330 65.5/90 119 679<br />
VOLKS001C 18 330 65.5/90 137 783<br />
VOLKS001D 18 335 65.5/90 137 783<br />
440 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
A<br />
Leaf Springs<br />
Camber<br />
B<br />
Length A<br />
Along Leaf Surface<br />
Length B<br />
Along Leaf Surface<br />
LEAF SPRING MEASUREMENT REFERENCE<br />
SINGLE STAGE SPRINGS<br />
A<br />
Length A<br />
Along Leaf Surface<br />
Camber<br />
Length B<br />
Along Leaf Surface<br />
B<br />
A<br />
Length A<br />
Along Leaf Surface<br />
Camber<br />
Length B<br />
Along Leaf Surface<br />
B<br />
SINGLE STAGE SPRINGS<br />
TWO TWO STAGE SPRINGS<br />
A<br />
Camber<br />
Part Number Length A Length B Camber Leaves Width Eye A Eye B<br />
Length A<br />
Length B<br />
FOR002A 585 735 120 5+2 60 55 32<br />
Along Leaf Surface<br />
Along Leaf Surface<br />
FOR002B 585 735 130 5+2 60 55 32<br />
FOR002C 585 735 145 6+2 60 55 32<br />
TWO STAGE SPRINGS<br />
FOR012A 580 750 200 5+1 60 55 32<br />
FOR012B 580 750 195 5+1 60 55 32<br />
FOR012C 580 750 188 5+1 60 55 32<br />
FOR012D 580 750 189 5+1 60 55 32<br />
FOR014A 755 835 260 5+1 75 45 42<br />
FOR014B 755 835 230 5+1 75 45 42<br />
FOR014C 755 835 245 5+1 75 45 42<br />
FOR014D 755 835 255 5+1 75 45 42<br />
HOLD004A 555 650 240/230 5+1 60 40 30<br />
HOLD004B 555 650 250/240 5+1 60 40 30<br />
HOLD004C 555 650 250/240 6+1 60 40 30<br />
HOLD006A 608 602 205 4+1 60 40 30<br />
HOLD006B 608 602 205 5+1 60 40 30<br />
HOLD006C 608 602 205 6+2 60 40 30<br />
HOLD006D 608 602 205 6+2 60 40 30<br />
HOLD021A 607 763 145 5+2 60 40 30<br />
HOLD021B 607 763 155 5+2 60 40 30<br />
HOLD021C 607 763 160 6+2 60 40 30<br />
HOLD021D 607 758 160 6+2 60 40 30<br />
HOLD023B 650 650 175 5+2 60 40 30<br />
HOLD023C 650 650 175 6+2 60 40 30<br />
IMAZ002B 650 700 165 8 60 42 32<br />
ISL6010 270 270 48 1 60<br />
JEEP004B 585 725 195/175 5+2 63 64.5 44.3<br />
JMC002B 610 690 150 5+2 60 40 30<br />
JMC002C 610 690 130 5+2 60 40 30<br />
MAH002B 612 610 185 5+2 70 35 35<br />
MAZDA006A 530 670 165 5+1 60 32 32<br />
MAZDA006B 530 670 150 6+2 60 32 32<br />
MAZDA006C 530 670 165 6+2 60 32 32<br />
MAZDA006D 530 670 150 7+2 60 32 32<br />
B<br />
Part Number Length A Length B Camber Leaves Width Eye A Eye B<br />
MAZDA041A 590 730 140 4+2 60 40 32<br />
MAZDA041B 590 730 140 4+2 60 40 32<br />
MAZDA041C 590 720 140 5+2 60 40 32<br />
MAZDA041D 590 720 130 6+2 60 40 32<br />
MITS018A 520 685 200 4+1 70 32 28<br />
MITS018B 515 685 195 4+1 70 32 28<br />
MITS018C 515 685 190 5+1 70 32 28<br />
MITS041A 515 685 140 4+1 70 32 28<br />
MITS041B 515 685 145 4+1 70 32 28<br />
MITS041C 515 685 155 5+1 70 32 28<br />
MITS047A 550 775 140 5+1 60 40 28<br />
MITS047B 550 775 140 5+1 60 40 28<br />
MITS047C 550 775 140 5+2 60 40 28<br />
NISS003B 560 550 185/170 6 60 22 33<br />
NISS004B 605 835 250/235 8 60 33 33<br />
NISS005B 560 550 185/170 6 60 40 33<br />
NISS011C 550 550 180/170 7 70 40 35<br />
NISS012C 595 825 217/200 7+2 70 35 35<br />
NISS012D 600 830 240/225 7+3 70 35 35<br />
NISS014A 565 635 145/135 4+2 60 40 33<br />
NISS014B 565 635 130/120 4+1 60 40 33<br />
NISS014C 565 635 130/120 5+1 60 40 33<br />
NISS021B 650 580 200 8 60 33 40<br />
NISS041B 670 735 195 5+1 60 40 33<br />
NISS041C 670 730 190 6+1 60 40 33<br />
NISS041D 670 730 180 7+2 60 40 33<br />
NISS047B 635 715 195 7+1 60 40 33<br />
NISS049B 700 650 230 5+1 60 40 33<br />
NISS057B 670 605 175 5+2 60 40 33<br />
NISS057C 670 605 175 6+2 60 40 33<br />
SSANG005B 710 720 200 5+1 70 56 28<br />
SSANG005C 710 720 200 6+1 70 56 28<br />
SUZ001B 480 470 120/110 5 50 30 40<br />
SUZ002B 510 520 175/155 4+1 50 40 30<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
441
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Leaf Springs<br />
Part Number Length A Length B Camber Leaves Width Eye A Eye B<br />
TOY001B 510 610 160 7 70 25 25<br />
TOY002B 510 620 180 7 70 25 25<br />
TOY003C 660 660 230 7+3 70 30 30<br />
TOY004B 510 610 160 7 70 35 35<br />
TOY004C 502 603 155 8 70 35 35<br />
TOY005C 655 675 230 7+3 70 35 35<br />
TOY006B 555 555 150 7 70 35 35<br />
TOY006C 555 555 175 8 70 35 35<br />
TOY006D 550 550 175 9 70 35 35<br />
TOY007A 570 655 230/220 7 70 35 35<br />
TOY007B 570 645 220/205 6+1 70 35 35<br />
TOY007C 565 655 230/220 7+1 70 35 35<br />
TOY008B 555 590 180 7 70 35 35<br />
TOY008C 555 590 180 8 70 35 35<br />
TOY009B 610 730 210 6+2 70 40 40<br />
TOY009C 610 720 210 7+2 70 40 40<br />
TOY009D 605 720 215 8+2 70 40 40<br />
TOY009E 610 720 220 9+2 70 40 40<br />
TOY010B 575 575 135/115 5 60 30 30<br />
TOY010C 575 575 130/110 6 60 30 30<br />
TOY011B 530 670 200 4+2 60 30 30<br />
TOY011C 530 670 210 5+2 60 30 30<br />
TOY027A 560 740 200 6+2 60 40 30<br />
TOY027B 560 740 200 4+2 60 40 30<br />
TOY027C 560 740 200 5+2 60 40 30<br />
TOY034B 505 630 205 7 70 35 35<br />
Part Number Length A Length B Camber Leaves Width Eye A Eye B<br />
TOY047A 695 815 245 7+2 70 40 40<br />
TOY047B 698 815 235 8+2 70 40 40<br />
TOY047C 698 815 235 9+2 70 40 40<br />
TOY047D 698 815 235 9+2 70 40 40<br />
TOY047E 698 815 250 9+2 70 40 40<br />
TOY057A 610 690 170 6+2 60 40 30<br />
TOY057B 610 690 190 4+2 60 40 30<br />
TOY057C 610 690 190 5+2 60 40 30<br />
TOY057D 610 690 200 6+2 60 40 30<br />
TOY062B 620 785 245 7+2 70 40 40<br />
TOY062C 620 785 245 8+2 70 40 40<br />
TOY062D 625 785 250 10+2 70 40 40<br />
TOY066B 705 705 185/175 5+2 60 40 40<br />
TOY066C 705 705 185/180 6+2 60 40 40<br />
TOY068B 590 685 200 4+2 60 40 30<br />
TOY068C 590 685 190 6+2 60 40 30<br />
TOY071B 800 815 200 4+2 60 40 40<br />
TOY071C 800 815 200 5+2 60 40 40<br />
TOY073B 655 755 130 3 70 70 60<br />
TOY073C 655 755 130 4 70 70 60<br />
TOY077A 700 700 170 5+2 60 40 30<br />
TOY077B 700 700 170 5+2 60 40 30<br />
TOY077C 700 700 170 6+2 60 40 30<br />
TOY077D 700 700 170 6+2 60 40 30<br />
VOLKS002B 750 760 245 5+2 70 60 46<br />
VOLKS002C 750 760 255 6+2 70 60 46<br />
TOY044C 535 670 150 4+2 60 40 40<br />
LEAF SPRING SPARE PARTS<br />
099 3/8” x 4” Centre Bolt<br />
098 5/16” x 4” Centre Bolt<br />
635 3/8” x 4” Centre Bolt - Extended Head<br />
CLINER001<br />
AFPAD001<br />
AFPAD002<br />
IWEDGE04<br />
IWEDGE08<br />
IWEDGE10<br />
IWEDGE12<br />
Plastic Clip Liner<br />
Plastic Anti-Friction Pad (Oval Locator)<br />
Plastic Anti-Friction Pad (Round Locator)<br />
1 Degree Wedge Kit<br />
2 Degree Wedge Kit<br />
3 Degree Wedge Kit<br />
4 Degree Wedge Kit<br />
442 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Torsion and Sway Bars<br />
TORSION AND SWAY BAR MEASUREMENT REFERENCE<br />
A<br />
BAR DIAMETER<br />
B<br />
BAR LENGTH<br />
Part Number Length Diameter A End Spline<br />
Count<br />
B End Spline<br />
Count<br />
HOLD005A 1000 26 43 43<br />
HOLD007 1000 26 47 47<br />
HOLD009 1220 30 47 47<br />
HOLD010 1144 30 47 47<br />
HYUND004 1275 29 43 43<br />
MAZDA005 924 26 40 40<br />
MAZDA014 1025 27 40 40<br />
MAH001 1063 28 43 43<br />
MITS013 1278 26 39 40<br />
Part Number Length Diameter A End Spline<br />
Count<br />
B End Spline<br />
Count<br />
NISS013 1203 26 39 39<br />
NISS017 1232 26 39 39<br />
NISS025 894 26 39 39<br />
NISS048 866 26 39 39<br />
SSANG001 1040 26 40 40<br />
TOY026 1063 26 43 40<br />
TOY042 1212 27 40 40<br />
TOY050 1160 32 46 46<br />
TOY051 1210 32 46 46<br />
MITS015C 1370 28 39 40<br />
MITS019 1308 28 39 40<br />
MITS031 1165 24 40 40<br />
SWAY BAR SPARE PARTS SWAY BAR REPLACEMENT BUSH<br />
To Suit Toyota Landcruiser 200 Front ISB200F ISBB20038R Rubber Sway Bar Chassis Bush 38mm<br />
To Suit Toyota Landcruiser 200 Rear ISB200R ISBB20033R Rubber Sway Bar Axle Mounting Bush 33mm<br />
ISBB200REB<br />
Rubber Sway Bar End Bush<br />
To Suit Nissan Patrol Y62 Front ISB600F ISBB60036R Rubber Sway Bar Chassis Bush 36mm<br />
To Suit Nissan Patrol Y62 Rear ISB600R ISBB60027R Rubber Sway Bar Axle Mounting Bush 27mm<br />
To Suit Toyota Landcruiser 70 Front Diesel ISB789FW ISBB78933R Rubber Sway Bar Chassis Bush 33mm<br />
ISBB789REB<br />
ISBB789DB<br />
Rubber Sway Bar End Bush<br />
Chassis Mounting D Bracket<br />
To Suit Toyota Landcruiser 70 Front Petrol ISB789FWP ISBB78933R Rubber Sway Bar Chassis Bush 33mm<br />
ISBB789REB<br />
ISBB789DB<br />
Rubber Sway Bar End Bush<br />
Chassis Mounting D Bracket<br />
To Suit Toyota Landcruiser 70 Rear ISB789RW ISBB78930R Rubber Sway Bar Axle Mounting Bush 30mm<br />
ISBB789REB<br />
ISBB789DB<br />
ISBB789RBK<br />
Rubber Sway Bar End Bush<br />
Axle Mounting D Bracket<br />
Chassis Mounting Bracket Set<br />
To Suit Toyota Hilux 2015+ Front ISB80F ISBB8033R Rubber Sway Bar Chassis Bush 33mm<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
443
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorbers<br />
SHOCK ABSORBER MEASUREMENT REFERENCE<br />
MEASURING POINTS<br />
MEASURING POINTS<br />
Part<br />
Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Part<br />
Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
12002GR 533 395 STEM 71 x M14 - - -<br />
12003GRC 650 404 STEM 81 X M14 ST883RK ET38 ET38<br />
12003GR 650 404 STEM 81 X M14 ST883RK ET38 ET38<br />
12075GR 487 296 ST1 2244K ST1 2244K<br />
12076GR 583 347 B1 632RF ST1 2244K<br />
12080GR 552 332 ST38 656RK ST38 656RK<br />
12081GR 631 388 B2 635RK B2 635RK<br />
12082GR 342 232 ST1 2244K CB7 CB7<br />
12083GR 505 310 STEM 57 X M14 - CLEVIS -<br />
12085GR 485 298 ST1 2244K B1 632RF<br />
12086GR 500 313 B1 632RF B1 632RF<br />
12087GR 350 236 ST1 2244K ET17 ET17<br />
12088GR 368 245 ST1 2244K ET113 ET113<br />
12089GR 510 320 ST1 2244K ET83 -<br />
12091GR 510 310 ST38 656RK ST38 656RK<br />
12094GR 655 402 B2 635RK B2 635RK<br />
12095GR 631 382 ET104 ET104 ET69 ET69<br />
12635GR 485 307 B1 632RF B1 632RF<br />
12636GR 588 357 B1 632RF B1 632RF<br />
12636GRP 588 362 B1 632RF B1 632RF<br />
12637GR 577 348 ST1 2244K B2 635RK<br />
12639GR 484 298 ST1 2244K ET17 ET17<br />
12640GR 564 343 B2 635RK ST38 656RK<br />
12643GR 412 261 ST6 2244AK ET17 ET17<br />
12644GR 510 320 ET153 - ET36 -<br />
12645GR 531 333 B1 632RF ET142 -<br />
12645GRS 520 328 B1 632RF ET142 -<br />
12646GR 495 310 ST1 2244K ET113 ET113<br />
12648GR 640 385 B2 635RK ST1 2244K<br />
12650GR 593 364 B2 635RK B2 635RK<br />
12652GR 540 333 B1 632RF B1 632RF<br />
12658GR 510 320 ST1 2244K ET83 -<br />
12661GR 535 329 ST1 2244K B2 635RK<br />
12665GR 565 345 ST1 2244AK CB7 CB7<br />
12666GR 560 348 CB20 CB20 B5 -<br />
12667GR 381 250 ST1 2244K ET17 ET17<br />
12669GR 560 348 CB20 CB20 ET24 -<br />
12670GR 562 351 B5 - ET24 -<br />
12671GR 627 372 ST1 2244K B1 632RF<br />
12682GR 618 373 ST38 656RK B2 635RK<br />
12682GRC 618 373 ST38-1 ST38-1 ET38 ET38<br />
12682GRP 618 373 ST38-1 ST38-1 ET38 ET38<br />
12683GR 615 365 ST38 656RK ST38 656RK<br />
12691GR 462 343 ST38 656RK ET153 ET153<br />
12696GR 570 347 ET161 - ST38 656RK<br />
12697GR 520 322 B2 635RK ST38 656RK<br />
12698GR 624 381 B1 632RF B1 632RF<br />
12710GR 564 432 STEM 95 X M12 ST710RK ET153-1 ET153-1<br />
12711GR 318 206 STEM 68 X M10 - - -<br />
12712GR 570 357 ET19 - ET141 -<br />
12712LGR 700 416 ET19 - ET141 -<br />
12713GR 470 325 STEM 86 X M10 - ET158 ET158<br />
12714GR 575 351 ST1 ST714RK ET159 -<br />
12715GR 423 305 STEM 71 X M10 - ET158-1 ET158-1<br />
12716GR 389 284 STEM 85 X M12 656R ET153-2 ET153-2<br />
12717GR 575 352 B1 632RF ET34 ET34<br />
444 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorbers<br />
Part<br />
Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Part<br />
Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
12718GR 380 265 ET159 - ET159 -<br />
12720GR 600 435 STEM 69 X M14 ST720RK ET113-1 ET113-1<br />
12721GR 607 382 STEM 28 X M14 - CLEVIS -<br />
12722GR 545 343 ET83 - ET83 -<br />
12725GR 615 460 STEM 56 X M12 - FORK -<br />
12726GR 602 365 ET69 ET69 ET69 ET69<br />
12727GR 512 378 STEM 65 x M12 ST727RK ET154 ET154<br />
12728GR 608 369 B1 632RF ET34 ET34<br />
12729GR 550 339 B1 632RF B1 632RF<br />
12729GRP 550 343 B1 632RF B1 632RF<br />
12730GR 560 425 STEM 68 X M12 ST710RK ET153-1 ET153-1<br />
12731GR 540 333 ET69 ET69 ET69 ET69<br />
12732GR 580 380 STEM 33 X M12 - ET162 -<br />
12735GR 830 667 STEM 35 X M12 - CLEVIS -<br />
12738GR 830 667 STEM 35 X M12 - CLEVIS -<br />
12740GR 452 299 STEM 81 X M12 - ET158-2 ET158-2<br />
12742GR 564 356 ST42 - ET160 ET160<br />
12743GR 600 362 ST10 ST10RK ET38 ET38<br />
12744GR 609 361 ST10 ST10RK ET17 ET17<br />
12745GR 495 359 STEM 64 x M12 ST710RK ET153-1 ET153-1<br />
12746GR 605 360 ST1 2244K ET17 ET17<br />
12747GR 625 400 STEM 45 x M14 - CLEVIS -<br />
12748GR 711 450 STEM 45 x M14 - CLEVIS -<br />
12749GR 530 325 ET69 ET69 B1 632RF<br />
12750GR 562 425 STEM 68 X M12 ST710RK ET153-3 ET153-3<br />
12751GR 575 325 ST38 656RK ET69 632RF<br />
12751LGR 650 382 ST38 656RK ET69 632RF<br />
12752GR 617 374 CB35 CB35 ET69 632RF<br />
12752LGR 665 396 CB35 CB35 ET69 632RF<br />
12755GR 625 381 ET113 - ET113 -<br />
12756GR 432 293 ET173 - ET173 -<br />
12757GR 650 390 CB34 - ET34 -<br />
12759GR 440 277 ST1 2244K ET17 ET17<br />
12760GR 495 310 ET177 ET177 ET177 ET177<br />
12764GR 440 307 STEM 70 x M12 - ET153 ET153<br />
12765GR 625 380 ET163 - ET163 -<br />
12774GR 550 336 ST6 2244AK CB7 CB7<br />
12775GR 575 357 ET61 - ET65 -<br />
12776GR 587 362 ET172 - CB34 -<br />
12777GR 587 362 ET172 - ET172 -<br />
12780GR 613 450 STEM 68 x M12 ST710RK ET113-1 ET113-1<br />
12781GR 650 384 ST38 ST21RK ET38-2 ET38-2<br />
12791GR 310 217 ST1 2244K ET17 ET17<br />
12795GR 447 290 ST21 ST21RK ET153 -<br />
12796GR 619 369 ST21 ST21RK B2 635RK<br />
12797GR 415 295 STEM 64 X M12 ST710RK ET153-1 ET153-1<br />
12804GR 535 345 CB159 - ET38 ET38<br />
12805GR 570 351 B1 632RF B2 635RK<br />
12807GR 451 344 STEM 48 X M10 - CB160 -<br />
12808GR 673 404 ET164 - ET164 -<br />
12809GR 461 354 STEM 55 X M10 - CB160 -<br />
12810GR 605 375 ET164 - ET164 -<br />
12811GR 630 390 ET113 - ST39 ST39<br />
12812GR 597 375 ST39 - ET174 ET174<br />
12823GR 478 360 STEM 28 X M10 - ET174 ET174<br />
12824GR 525 320 STEM 90 X M10 - ET175 ET175<br />
12825GR 545 330 STEM 90 X M10 - ET175 ET175<br />
12826GR 580 365 ET176 ET176 ET176 ET176<br />
12827GR 496 376 STEM 65 X M12 - ET155 ET155<br />
12853GR 550 437 STEM 65 X M12 STZ2RK ET153-1 ET153-1<br />
12885GR 555 411 STEM 46 X M12 N/A ET885 ET885<br />
12886GR 650 398 ET886 ET886 ET886 ET886<br />
12886GRC 650 398 ET886 ET886 ET886 ET886<br />
12887GR 580 432 STEM 50 x M12 - - -<br />
12888GRC 730 452 - - - -<br />
12888GR 730 452 - - - -<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
445
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorbers<br />
Part Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Part Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
24080FE 552 332 ST38 656RK ST38 656RK<br />
24081FE 631 388 B2 635RK B2 635RK<br />
24081FEP 631 388 B2 635RK B2 635RK<br />
24082FE 342 230 ST1 2244K CB7 CB7<br />
24087FE 349 235 ST1 2244K ET17 ET17<br />
24088FE 368 246 ST1 2244K ET113 ET113<br />
24091FE 510 310 ST38 656RK ST38 656RK<br />
24091FEP 510 310 ST38 656RK ST38 656RK<br />
24091LFE 557 354 ST38 656RK ST38 656RK<br />
24091LFE1 597 353 ST38 656RK ST38 656RK<br />
24091LFEP 557 354 ST38 656RK ST38 656RK<br />
24094FE 658 402 B2 635RK B2 635RK<br />
24094LFE 718 429 B2 635RK B2 635RK<br />
24094LFE1 760 450 B2 635RK B2 635RK<br />
24094LFEC 718 429 B2 635RK B2 635RK<br />
24094LFEP 718 429 B2 635RK B2 635RK<br />
24095FE 630 385 ET104 ET104 ET69 ET69<br />
24635FE 485 310 B1 632RF B1 632RF<br />
24636FE 587 361 B1 632RF B1 632RF<br />
24636FEP 587 361 B1 632RF B1 632RF<br />
24637FE 577 350 ST1 2244K B2 635RK<br />
24639FE 484 303 ST1 2244K ET17 ET17<br />
24640FE 564 343 B2 635RK ST38 656RK<br />
24643FE 412 266 ST6 2244AK ET17 ET17<br />
24644FE 510 325 ET153 - ET36 -<br />
24645FE 531 333 B1 632RF ET142 -<br />
24645FEC 531 333 B1 632RF ET142 -<br />
24645FES 520 328 B1 632RF ET142 -<br />
24646FE 495 310 ST1 2244K ET113 ET113<br />
24648FE 640 385 B2 635RK ST1 2244K<br />
24650FE 592 366 B2 635RK B2 635RK<br />
24650FEP 592 366 B2 635RK B2 635RK<br />
24652FE 540 337 B1 632RF B1 632RF<br />
24661FE 533 331.5 ST1 2244K B2 635RK<br />
24665FE 564 346 ST1 2244K CB7 CB7<br />
24666FE 565 346 CB20 CB20 B5 -<br />
24667FE 382 251 ST1 2244AK ET17S ET17S<br />
24682FE 618 373 ST38 656RK B2 635RK<br />
24682FEC 618 373 ST38-1 ST38-1 ET38 ET38<br />
24682FEP 618 373 ST38-1 ST38-1 ET38 ET38<br />
24682LFE 670 398 ST38 656RK B2 635RK<br />
24682LFE1 730 428 ST38 656RK B2 635RK<br />
24683FE 615 365 ST38 656RK ST38 656RK<br />
24683LFE 670 390 ST38 656RK ST38 656RK<br />
24683LFE1 730 420 ST38 656RK ST38 656RK<br />
24691FE 462 343 ST38 656RK ET153 ET153<br />
24696FE 570 347 ET161 - ST38 656RK<br />
24697FE 520 322 B2 635RK ST38 656RK<br />
24698FE 626 381 B1 632RF B1 632RF<br />
24698FEC 626 381 B1 632RF B1 632RF<br />
24698FEP 626 381 B1 632RF B1 632RF<br />
24710FE 540 408 STEM 95 X M12 ST710RK ET153-1 ET153-1<br />
24713FE 470 325 STEM 86 X M10 - ET158 ET158<br />
24715FE 423 305 STEM 71 X M10 - ET158-1 ET158-1<br />
24716FE 389 284 STEM 85 X M12 656R ET153-2 ET153-2<br />
24717FE 577 356 B1 632RF ET34 ET34<br />
24717FEC 577 356 B1 632RF ET34 ET34<br />
24717FEP 575 356 B1 632RF ET34 ET34<br />
24718FE 380 265 ET159 - ET159 -<br />
24720FE 600 435 STEM 69 X M14 ST720RK ET113-1 ET113-1<br />
24727FE 512 378 STEM 65 x M12 ST727RK ET154 ET154<br />
24728FE 608 373 B1 632RF ET34 ET34<br />
24728FEP 608 373 B1 632RF ET34 ET34<br />
24729FE 550 348 B1 632RF B1 632RF<br />
24729FEP 550 348 B1 632RF B1 632RF<br />
24730FE 560 425 STEM 68 X M12 ST710RK ET153-1 ET153-1<br />
24732FE 580 374 STEM 33 X M12 - ET162 -<br />
24740FE 452 299 STEM 81 X M12 - ET158-2 ET158-2<br />
24742FE 564 356 ST42 - ET160 ET160<br />
24743FE 600 365 ST10 ST10RK B2 635RK<br />
24744FE 610 365 ST10 ST10RK ET17 ET17<br />
24745FE 495 359 STEM 64 x M12 ST710RK ET153-1 ET153-1<br />
24746FE 605 366 ST1 2244K ET17 ET17<br />
24750FE 562 425 STEM 68 X M12 ST710RK ET153-3 ET153-3<br />
24776FE 587 367 ET172 - CB34 -<br />
24777FE 587 367 ET172 - ET172 -<br />
24780FE 613 450 STEM 68 x M12 ST710RK ET113-1 ET113-1<br />
24781FE 650 387 ST38 ST21RK ET38-2 ET38-2<br />
24788FE 560 341 ET113 - ST39 ST39<br />
24789FE 576 349 ST39 ST39 ET174 ET174<br />
24795FE 447 290 ST21 ST21RK ET153 -<br />
24796FE 615 369 ST21 ST21RK B2 635RK<br />
24804FE 535 345 CB159 - ET38 ET38<br />
24805FE 570 355 B1 632RF B2 635RK<br />
24811FE 630 390 ET113 - ST39 ST39<br />
24812FE 597 375 ST39 ST39 ET174 ET174<br />
24827FE 496 376 STEM 65 XM12 - ET155 ET155<br />
24840FE 635 450 STEM 31 x M14 - CLEVIS -<br />
24842FE 570 375 B2 635RK B2 635RK<br />
24842FEC 570 375 B2 635RK B2 635RK<br />
24845FE 517 359 STEM 64 x M12 ST710RK ET153-1 ET153-1<br />
24851FE 640 456 ET180 - ET181 -<br />
24852FE 480 491 ET180 - ET181 -<br />
24853FE 550 437 STEM 65 X M12 ST72R K ET153-1 ET153-1<br />
24883FE 620 453 STEM 63 X M14 ST883RK ET183 ET183<br />
24884FE 620 410 STEM 81 X M14 ST884RK ET38 ET38<br />
24885FE 555 411 STEM 46 X M12 N/A ET886 ET885<br />
24886FE 650 398 ET886 ET886 ET886 ET886<br />
24886FEC 650 398 ET886 ET886 ET886 ET886<br />
446 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorbers<br />
Part Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Seal<br />
Service Kit<br />
Seat<br />
Insulator<br />
Adjusting Rings<br />
45002FE 533 395 STEM 71 x M14<br />
45003FEC 650 404 STEM 81 X M14 ST883RK ET38 ET38 45SK7220<br />
45003FE 650 404 STEM 81 X M14 ST883RK ET38 ET38 45SK7220<br />
45003FEP 650 404 STEM 81 X M14 ST883RK ET38 ET38 45SK7220<br />
45080FE 552 358 ST38 656RK ST38 656RK 45SK7220<br />
45081FE 631 400 B2 635RK B2 635RK 45SK7220<br />
45081FEC 631 400 B2 635RK B2 635RK 45SK7220<br />
45091FE 510 318 ST38 656RK ST38 656RK 45SK7220<br />
45091FEP 510 318 ST38 656RK ST38 656RK 45SK7220<br />
45091LFE 557 341 ST38 656RK ST38 656RK 45SK7220<br />
45091LFE1 597 361 ST38 656RK ST38 656RK 45SK7220<br />
45091LFE3 860 492 ST38 656RK ST38 656RK 45SK7220<br />
45091LFEP 557 341 ST38 656RK ST38 656RK 45SK7220<br />
45094FE 658 416 B2 635RK ET38 ET38 45SK7220<br />
45094FEC 658 416 B2 635RK ET38 ET38 45SK7220<br />
45094LFE 718 446 B2 635RK ET38 ET38 45SK7220<br />
45094LFE1 760 467 B2 635RK ET38 ET38 45SK7220<br />
45094LFE3 860 516 B2 635RK ET38 ET38 45SK7220<br />
45095FE 630 398 ET104 ET104 ET69 ET69 45SK7220<br />
45095FEC 630 398 ET104 ET104 ET69 ET69 45SK7220<br />
45635FE 485 323 B1 632RF B1 632RF 45SK7220<br />
45636FE 587 375 B1 632RF B1 632RF 45SK7220<br />
45636FEC 587 375 B1 632RF B1 632RF 45SK7220<br />
45637FE 577 363 ST1 2244K B2 635R 45SK7220<br />
45640FE 564 357 ET38 ET38 ST38 656RK 45SK7220<br />
45648FE 640 395 B2 635RK ST1 2244K 45SK7220<br />
45650FE 592 380 B2 635RK B2 635RK 45SK7220<br />
45650FEC 592 380 B2 635RK B2 635RK 45SK7220<br />
45650FEP 592 380 B2 635RK B2 635RK 45SK7220<br />
45652FE 540 354 B1 632RF B1 632RF 45SK7220<br />
45652FEC 540 354 B1 632RF B1 632RF 45SK7220<br />
45661FE 533 343 ST1 2244K ET38 ET38 45SK7220<br />
45667FE 382 257 ST1 2244K ET17 ET17 45SK6520<br />
45682FE 618 383 ST38 656RK ET38 ET38 45SK7220<br />
45682FEC 618 383 ST38-1 ST38-1 ET38 ET38 45SK7220<br />
45682FEP 618 383 ST38-1 ST38-1 ET38 ET38 45SK7220<br />
45682LFE 670 409 ST38 656RK ET38 ET38 45SK7220<br />
45682LFE1 730 439 ST38 656RK ET38 ET38 45SK7220<br />
45682LFE3 860 504 ST38 656RK ET38 ET38 45SK7220<br />
45683FE 615 370 ST38 656RK ST38 656RK 45SK7220<br />
45683LFE 670 397 ST38 656RK ST38 656RK 45SK7220<br />
45683LFE1 730 427 ST38 656RK ST38 656RK 45SK7220<br />
45691FE 462 342 ST38 656RK ET153 ET153 45SK6520 45RSS001 45TAR001<br />
45698FE 626 394 B1 632RF B1 632RF 45SK7220<br />
45698FEC 626 394 B1 632RF B1 632RF 45SK7220<br />
45710FE 540 408 STEM 95 x M12 ST710RK ET153-1 ET153-1 45SK6520 45RSS001 45TAR001<br />
45715FE 442 315 STEM 71 X M10 - ET158-1 ET158-1 45SK6520 45RSS001 45TAR001<br />
45716FE 389 283 STEM 86 x M12 656RK ET153-2 ET153-2 45SK7220 45RSS004 45TAR002<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
447
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorbers<br />
Part Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Seal<br />
Service Kit<br />
Seat<br />
Insulator<br />
Adjusting Rings<br />
45716LFE 402 287 STEM 86 x M12 656RK ET153-2 ET153-2 45SK7220 45RSS004 45TAR002<br />
45717FE 572 373 B1 632RF ET34 ET34 45SK7220<br />
45717FEC 572 373 B1 632RF ET34 ET34 45SK7220<br />
45720FE 600 435 STEM 71 x M14 ST720RK ET113-1 ET113-1 45SK7218 45RSS002 45TAR002<br />
45727FE 512 378 STEM 65 x M12 ST727RK ET154 ET154 45SK7220 45RSS005 45TAR002<br />
45728FE 608 389 B1 632RF ET34 ET34 45SK7220<br />
45728FEC 608 389 B1 632RF ET34 ET34 45SK7220<br />
45729FE 445 372 B1 632RF B1 632RF<br />
45729FEC 445 372 B1 632RF B1 632RF<br />
45729FEP 445 372 B1 632RF B1 632RF<br />
45730FE 560 425 STEM 68 X M12 ST710RK ET153-1 ET153-1 45SK6520 45RSS001 45TAR001<br />
45732FE 580 380 STEM 33 X M12 - ET162 - 45SK7218<br />
45732FEC 580 380 STEM 33 X M12 - ET162 - 45SK7218<br />
45740FE 452 302 STEM 81 x M12 - ET158-2 ET158-2 45SK7220 45RSS003 45TAR002<br />
45742FE 564 357 ST42 - ET160 ET160 45SK7220<br />
45743FE 600 376 ST10 ST10RK ET38 ET38 45SK7220<br />
45744FE 610 379 ST10 ST10RK ET17 ET17 45SK7220<br />
45745FE 495 359 STEM 64 x M12 ST710RK ET153-1 ET153-1 45SK6520 45RSS001 45TAR001<br />
45746FE 605 397 ST1 2244K ET17 ET17 45SK6520<br />
45746FEC 605 397 ST1 2244K ET17 ET17 45SK6520<br />
45750FE 562 425 STEM 68 x M12 ST710RK ET153-3 ET153-3 45SK6520 45RSS001 45TAR001<br />
45751FE 575 361 ST38 656RK B1 632RF 45SK7220<br />
45751LFE 650 399 ST38 656RK B1 632RF 45SK7220<br />
45752FE 617 393 CB35 CB35 B1 632RF 45SK7220<br />
45752LFE 665 417 CB35 CB35 B1 632RF 45SK7220<br />
45780FE 613 450 STEM 68 X M12 ST710RK ET113-1 ET113-1 45SK7218 45RSS002 45TAR002<br />
45781FE 650 401 ST21 ST21RK ET38-2 ET38-2 45SK7220<br />
45795FE 447 295 ST21 ST21RK ET38-1 ET38-1 45SK7220<br />
45796FE 615 401 ST21 ST21RK ET38 ET38 45SK7220<br />
45796FEP 615 401 ST21 ST21RK ET38 ET38 45SK7220<br />
45802FE 755 471 ET165 - ET165 - 45SK7220<br />
45802LFE 860 524 ET165 - ET165 - 45SK7220<br />
45803FE 710 449 ET165 - ET165 - 45SK7220<br />
45827FE 496 376 STEM 65 X M12 - ET155 ET155 45SK7218 45RSS005 45TAR002<br />
45845FE 517 359 STEM 64 x M12 ST710RK ET153-1 ET153-1 45SK6520 45RSS001 45TAR001<br />
45851FE 640 456 ET180 - ET181 - 45SK6520<br />
45851FEC 640 456 ET180 - ET181 - 45SK6520<br />
45851LFE 680 421 ET180 - ET181 - 45SK6520<br />
45851LFEC 680 421 ET180 - ET181 - 45SK6520<br />
45852FEC 640 498 ET180 - ET181 - 45SK6520<br />
45852LFE 730 453 ET180 - ET181 - 45SK6520<br />
45852LFEC 730 453 ET180 - ET181 - 45SK6520<br />
45853FE 550 437 STEM 65 X M12 ST72RK ET153-1 ET153-1 45SK6520 45RSS001 45TAR001<br />
45854FE 678 446 ET153-1 - ET153-1 - 45SK7220<br />
45854FEC 678 446 ET153-1 - ET153-1 - 45SK7220<br />
45854FEP 678 446 ET153-1 - ET153-1 - 45SK7220<br />
45855FE 542 389 STEM x 30 x M12 - CLEVIS 72.5 x 16.5 - 45SK6520<br />
45855LFE 558 389 STEM x 30 x M12 - CLEVIS 72.5 x 16.5 - 45SK6520<br />
448 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorbers<br />
Part Number<br />
Threaded Body Strut<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Seal<br />
Service Kit<br />
45856FE 678 446 ET153-2 ET153-2 ET153-3 - 45SK7220<br />
45856FEC 678 446 ET153-2 ET153-2 ET153-3 - 45SK7220<br />
45856LFE 700 457 ET153-2 ET153-2 ET153-3 - 45SK7220<br />
45856LFEC 700 457 ET153-2 ET153-2 ET153-3 - 45SK7220<br />
45860FE 561 412 STEM 30 X M12 - CLEVIS 72 X 16.5 - 45SK6520<br />
45860FEC 700 426 STEM 65 X M12 - ET153-3 ET153-3 45SK7220<br />
45862FE 700 426 STEM 65 X M12 - ET153-3 ET153-3 45SK7220<br />
45883FE 620 453 STEM 63 X M14 ST883RK ET183 ET183 45SK7218<br />
45884FE 660 424 STEM 81 X M14 ST883RK ET38 ET38 45SK7220<br />
45884FEP 660 424 STEM 81 X M14 ST883RK ET38 ET38 45SK7220<br />
45885FE 555 411 STEM 46 X M12 N/A ET885 ET885 45SK6520<br />
45886FE 650 409 ET886 ET886 ET886 ET886 45SK7220<br />
45886FEC 650 409 ET886 ET886 ET886 ET886 45SK7220<br />
45886FEP 650 409 ET886 ET886 ET886 ET886 45SK7220<br />
45887FE 580 432 STEM 50 x M12 45SK7220<br />
45888FEC 730 452 45SK7220<br />
45888FE 730 452 45SK7220<br />
45888FEP 730 452 45SK7220<br />
Seat<br />
Insulator<br />
Adjusting Rings<br />
Make To Suit Model Part No. OEM Spring Seat Height<br />
To Suit Ford To Suit Ranger PX, PX II 45727FE 190mm<br />
To Suit Ranger PX III 45827FE 166mm<br />
To Suit Ranger Next-Gen 45885FE 193mm<br />
To Suit F-150 45887FE 193mm<br />
To Suit Holden To Suit Colorado / Trailblazer 45745FE 190mm<br />
To Suit Isuzu To Suit D-Max 45745FE 190mm<br />
To Suit D-Max 45845FE 195mm<br />
To Suit Mazda To Suit BT50 45727FE 190mm<br />
To Suit Mercedes To Suit X-Class 45716FE 105mm<br />
To Suit Mitsubishi To Suit Triton 45715FE 210mm<br />
To Suit Nissan To Suit Navara D40 45716FE 105mm<br />
To Suit Navara NP300 45716FE 105mm<br />
To Suit Patrol Y62 45740FE 130mm<br />
Make To Suit Model Part No. OEM Spring Seat Height<br />
To Suit RAM To Suit RAM 1500 DS 45855FE 185mm<br />
To Suit Renault To Suit Alaskan 45716FE 105mm<br />
To Suit Toyota To Suit Prado 90 / 95 45691FE 163mm<br />
To Suit Hilux / Fortuner 2005-2014 45710FE 229mm<br />
To Suit Hilux / Fortuner 2015+ 45730FE 224mm<br />
To Suit Prado 120 45710FE 214mm<br />
To Suit Prado 150 2009-10/2017 45750FE 214mm<br />
To Suit Prado 150 11/2017+ 45710FE 214mm<br />
To Suit FJ Cruiser / Tacoma 45710FE 214mm<br />
To Suit Landcruiser 200 45720FE 220mm<br />
To Suit Landcruiser 300 45883FE 237mm<br />
To Suit Tundra 45780FE 245mm with TOY063 Coil<br />
To Suit Tundra 3rd Gen 45002FE 176mm<br />
Foam Cell Pro Struts feature a threaded body for ride height adjustment. Use Ironman 4x4, P/N# ISHOCKTOOL001 wrench<br />
when making adjustments. It may be neccessary to unload the spring tension before making adjustments.<br />
When setting ride height use the OEM shock absorber as a reference for spring seat height, or refer table above.<br />
Many independent suspension systems incorporating struts operate at a 2:1 motion ratio. For every 1mm of movement<br />
(compression or extension) at the strut, equates to 2mm movement when measured at the wheel. This MUST be<br />
considered when adjusting seat height. For example a 10mm seat height adjustment will provide 20mm change in ride<br />
height.<br />
SPRING<br />
SEAT<br />
HEIGHT<br />
Independent suspension MUST<br />
maintain at least 60mm downward<br />
Spring<br />
travel from ride height. Raising ride<br />
Seat<br />
height too high can damage the<br />
height<br />
suspension components, impair<br />
suspension operation and safety.<br />
ISHOCKTOOL001 Multi-tool for shock absorber service and strut ride height adjustment<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
449
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Steering Dampers<br />
STEERING DAMPER MEASUREMENT REFERENCE<br />
MEASURING POINTS<br />
MEASURING POINTS<br />
Part<br />
Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
Part<br />
Number<br />
Extended<br />
(mm)<br />
Compressed<br />
(mm)<br />
Upper Mount<br />
Type<br />
Upper<br />
Replacement<br />
Lower Mount<br />
Type<br />
Lower<br />
Replacement<br />
3501 550 345 B9 B9MK B9 B9MK<br />
3502 655 394 ET65 - ET65 -<br />
3511 525 310 ST1 2244K ST1 2244K<br />
3517 609 368 B6 - B6 -<br />
3521 540 340 ST1 2244K B9 B9MK<br />
3521S 487 293 ST1 2244K ST1 2244K<br />
3522 541 331 B1 632RF B1 632RF<br />
3523 458 322 B9 B9MK B9 B9MK<br />
3524 648 423 B9 B9MK B9 B9MK<br />
3525 748 443 B9 B9MK B9 B9MK<br />
3530 445 290 ET17 ET17 ET17 ET17<br />
3532 677 439 ST1 2244K ET57 -<br />
3533 613 368 ET109 - B9 B9MK<br />
3534 577 350 ET17 ET17 B1 632RF<br />
3536 487 292 ST1 2244K ST1 2244K<br />
3540 480 298 B1 632RF ET65 -<br />
3541 528 332 ET65 - ET65 -<br />
3542 622 419 ET17 - B1 -<br />
3543 725 520 ET65 - ET65 -<br />
3544 535 338 ET65 - ET65 -<br />
450 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Shock Absorber Mount Types<br />
SHOCK ABSORBER MOUNTS MEASUREMENT REFERENCES<br />
B<br />
B6, B9 CB<br />
ST<br />
ET<br />
B<br />
A<br />
A<br />
B<br />
B<br />
C<br />
A<br />
B<br />
Sleeved<br />
C<br />
A<br />
Type A Diameter B Length<br />
B1 16 36<br />
B2 19 43.5<br />
B5 15.5 33<br />
B6 16 36 Adaptor<br />
B9 16 36 Adaptor<br />
CB20 13 95 77<br />
CB34 11 97 75<br />
CB35 10 90 80<br />
CB7 11.5 78 62<br />
CB159 10 116 95.5<br />
CB160 11.5 128 100<br />
ET104 20 43<br />
ET109 10 24.1<br />
ET113 16 38.5<br />
ET113-1 16 38.5 Sleeved<br />
ET141 12 41<br />
ET142 16 36.5<br />
ET153 14 40 Sleeved<br />
ET153-1 14 40 Sleeved<br />
ET153-2 14 41.5 Sleeved<br />
ET153-3 14 41.5 Sleeved<br />
ET154 16 38 Sleeved<br />
ET155 20 49.5 Sleeved<br />
ET158 14 50 Sleeved<br />
ET158-1 14 50 Sleeved<br />
ET158-2 14 50 Sleeved<br />
ET159 14 48 Sleeved<br />
ET160 14 53 Sleeved<br />
ET161 16 70<br />
ET162 14 61.5 Sleeved<br />
Type A Diameter B Length<br />
ET163 16 32.5 Sleeved<br />
ET164 14.5 43<br />
ET165 20 55<br />
ET17 12 31.5<br />
ET172 12.4 43.5<br />
ET173 13 42.5<br />
ET174 12 38 Sleeved<br />
ET175 12.2 38 Sleeved<br />
ET176 16 38<br />
ET177 12 32 Sleeved<br />
ET180 13 70<br />
ET181 13 40<br />
ET19 12 46<br />
ET24 12.5 36<br />
ET34 14 41.5<br />
ET36 19 44<br />
ET38 19 45.5<br />
ET38-1 14 38<br />
ET38-2 12 39<br />
ET57 10 26.1<br />
ET61 12 46<br />
ET65 12 36 Sleeved<br />
ET69 12 40 Sleeved<br />
ET83 12 37.5 Sleeved<br />
ST1 10 26 60<br />
ST10 12 39 64<br />
ST21 17 59 84<br />
ST38 14 43 70<br />
ST38-1 14 43 70<br />
ST42 Rectangle M12 44 80<br />
ST6 11 34 65<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
451
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Trim Packers<br />
TRIM PACKER MEASUREMENT REFERENCE<br />
I/D<br />
THICKNESS<br />
O/D<br />
Part Number O/D I/D Thickness Material<br />
HILFR05 63 54.5 5 Steel<br />
HILFR05F 63 60.5 5 Steel<br />
HILFR10 63 54.5 10 Steel<br />
HILFR10F 63 60.5 10 Steel<br />
HILFR15 63 54.5 15 Steel<br />
HILFR15F 63 60.5 15 Steel<br />
LC70F30 138 86 30 Polyurethane<br />
LCF20 160 114.5 20 Polyurethane<br />
Part Number O/D I/D Thickness Material<br />
LCPR20 168 108 20 Polyurethane<br />
LCPR25 168 108 25 Polyurethane<br />
LCR15 187 133.5 15 Polyurethane<br />
LCR30 187 133.5 30 Polyurethane<br />
PATF15 172 116 15 Polyurethane<br />
PATF30 172 116 30 Polyurethane<br />
PATR15 180 120 15 Polyurethane<br />
PATR30 180 120 30 Polyurethane<br />
LCF30 160 114.5 30 Polyurethane<br />
452 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
U-Bolts and Load Plus Helper Springs<br />
U-BOLTS MEASUREMENT REFERENCE<br />
SQUARE<br />
ROUND<br />
I/D<br />
I/D<br />
LENGTH<br />
LENGTH<br />
Part Number Type Length I/D Thread Tension Nm<br />
415UBK Round 215 83 M14 X 1.5 X 100 125<br />
416UBK Round 230 83 M14 X 1.5 X 100 125<br />
416UBKL Round 250 83 M14 X 1.5 X 100 125<br />
417UBK Round 220 88 M14 X 1.5 X 80 125<br />
436UBK Square 230 73 M14 X 1.5 X 100 125<br />
437UBK Square 175 62 M14 X 1.5 X 100 125<br />
437UBKL Square 190 62 M14 X 1.5 X 100 125<br />
438UBK Square 200 66 M14 X 1.5 X 100 125<br />
449UBK Square 230 83 M14 X 1.5 X 100 125<br />
449UBKL Square 240 81 M14 X 1.5 X 100 125<br />
449UBKL1 Square 265 81 M14 X 1.5 X 100 125<br />
451UBK Round 190 75 M12 X 1.5 X 75 75<br />
452UBK Square 120 63 M12 X 1.5 X 75 75<br />
453UBK Round 230 97 M14 X 1.5 X 100 125<br />
Part Number Type Length I/D Thread Tension Nm<br />
512UBK Round 160 70 M12 X 1.5 X 65 75<br />
654UBK Round 165 82 M12 X 1.5 X 75 75<br />
655UBK Round 140 70 M12 X 1.5 X 65 75<br />
668UBK Square 230 73 M14 X 1.5 X 100 125<br />
669UBK Square 230 73 M14 X 1.5 X 100 125<br />
670UBK Round 230 95 M14 X 1.5 X 100 125<br />
678UBK Square 200 62 M14 X 1.5 X 70 125<br />
788UBK Square 190 63 M12 X 1.25 X65 75<br />
1100UBK Round 230 110 M14 X 1.5 X 100 125<br />
1100UBKL Round 265 110 M14 X 1.5 X 100 125<br />
1102UBK Square 155 72 M12 X 1.5 X 65 75<br />
1103UBK Round 185 72 M14 X 1.5 X 100 125<br />
1104UBK Round 200 83 M14 X 1.5 X 100 125<br />
1106UBK Square 205 92 M14 x 1.5 x 75 125<br />
LOAD PLUS HELPER SPRINGS<br />
Part Number Width Thickness Length Mounting Kit U-Bolt<br />
LP1 60 12 425 LP3-1 LP3-2<br />
LP2 60 12 420 LP3-1 LP3-2<br />
LP3 60 12 442 LP3-1 LP3-2<br />
Part Number Width Thickness Length Mounting Kit U-Bolt<br />
LP5 50 8 310 LP5-1 LP5-2<br />
LP7 75 12 438 LP7-1 LP7-2<br />
LP9 70 16 435 LP9-1 LP9-2<br />
LP4 70 12 442 LP4-1 LP4-2<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
453
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
Suspension Arm Rubber Bush Kits<br />
WITH STANDARD RADIUS ARM BUSHES<br />
Model Part Number Contents Position Qty Per Kit<br />
TO SUIT NISSAN PATROL Y60 GQ 1989 - On 839RK 832RT Radius Arm - Diff 4<br />
TO SUIT NISSAN PATROL Y61 GU WAGON Pre 2/2000 833R Radius Arm Chassis 4<br />
836RT Trailing Arm 8<br />
834RT Panhard Rod - Chassis 2<br />
840RT Panhard Rod - Diff 2<br />
TO SUIT NISSAN PATROL Y61 GU WAGON 2/2000 - On 848RK 832RT Radius Arm - Diff 4<br />
833R Radius Arm Chassis 4<br />
836RT Trailing Arm 8<br />
848RT Panhard Rod - Chassis 2<br />
840RT Panhard Rod - Diff 2<br />
TO SUIT TOYOTA LANDCRUISER 80/105 847RK 832RT Radius Arm - Diff 4<br />
846RT Radius Arm Chassis 2<br />
844RT Trailing Arm Upper 4<br />
843RT Trailing Arm Lower 4<br />
841RT Front Panhard Rod 2<br />
845RT Rear Panhard Rod 2<br />
WITH 2º OFFSET RADIUS ARM BUSHES<br />
Model Part Number Contents Position Qty Per Kit<br />
TO SUIT NISSAN PATROL Y60 GQ 1989 - On 839CRK 1144R Radius Arm - Diff Offset 4<br />
TO SUIT NISSAN PATROL Y61 GU WAGON Pre 2/2000 833R Radius Arm Chassis 4<br />
836RT Trailing Arm 8<br />
834RT Panhard Rod - Chassis 2<br />
840RT Panhard Rod - Diff 2<br />
TO SUIT NISSAN PATROL Y61 GU WAGON 2/2000 - On 848CRK 1144R Radius Arm - Diff Offset 4<br />
833R Radius Arm Chassis 4<br />
836RT Trailing Arm 8<br />
848RT Panhard Rod - Chassis 2<br />
840RT Panhard Rod - Diff 2<br />
TO SUIT TOYOTA LANDCRUISER 80/105 847CRK 1144R Radius Arm - Diff Offset 4<br />
846RT Radius Arm Chassis 2<br />
844RT Trailing Arm Upper 4<br />
843RT Trailing Arm Lower 4<br />
841RT Front Panhard Rod 2<br />
845RT Rear Panhard Rod 2<br />
454 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Ironman 4x4 Strut Compressor<br />
by<br />
Part No. IBSC7600<br />
Ironman 4x4 have teamed with Branick<br />
to bring you the industry leading 7600<br />
model strut compressor. The 7600 is<br />
the top of the line strut compressor and<br />
provides a safe and efficient way to<br />
assemble and disassemble struts.<br />
Key Features:<br />
• Increases workshop profitability<br />
• Safer and easier than alternate methods<br />
• Handles the heaviest 4WD struts<br />
• Has long handles for extra torque<br />
• Multi-position spring hooks<br />
• Has a long compression stroke<br />
• Does not require adapters<br />
• Heavy duty acme thread<br />
• Versatile mounting options<br />
• All-steel construction<br />
• Increase productivity<br />
• Made in USA<br />
IRONMAN 4X4<br />
1 year<br />
year<br />
IRON CLAD WARRANTY<br />
SAFER, STRONGER, SMARTER<br />
+61 3 9532 1111<br />
www.ironman4x4.com
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
FAQ / Troubleshooting<br />
Can I assemble struts at home?<br />
Can I re-use my original rubber spring bushes?<br />
In most cases, no. Ironman 4x4 recommend strut assembly be performed only by a qualified<br />
automotive mechanic using specialised strut compressor equipment.<br />
Assembled struts store large amounts of sprung energy. Only mechanics with necessary<br />
tools and equipment should attempt to disassemble or assemble a strut. Mishandling of<br />
strut assemblies can result in severe injury or death.<br />
Never loosen or remove strut centre top nut until all spring energy is retained within a high<br />
quality strut compressor.<br />
The shock absorber appears to be leaking.<br />
Upon initial use, there may be an oily residue or a small amount of oil originating from the<br />
rod seal and surrounding parts, this is referred to as manufacturing overflow.<br />
Oil can be trapped in the seal during assembly and released during transport or initial<br />
operation. This is considered normal and should be wiped clean prior to installation or after<br />
first use. If oil continues to appear, the shock absorber may be leaking and it should be<br />
replaced.<br />
The shock absorber does not<br />
self-extend with gas pressure.<br />
Ironman 4x4 Nitro Gas shock absorbers will self-extend due to pressurised nitrogen gas<br />
contained within, the rate of gas extension offers little relevance in determining the health<br />
or performance of the shock absorber.<br />
Ironman 4x4 Foam Cell shock absorbers will NOT self-extend like a gas pressurised shock<br />
absorber as they do not contain gas pressure - A Foam Cell shock absorber will generally<br />
feel firmer to extend than it will to compress.<br />
If a gas shock absorber fails to self-extend, this may not indicate a problem, it may simply<br />
be due to a dry or dirty piston rod, firm valving resistance or due to low gas pressure<br />
design. This does not adversely affect performance.<br />
Avoid removing the thin film of oil from the piston rod, it is required for smooth seal<br />
operation and lubrication. A light oil may be used to rejuvenate the seal if a squeak is<br />
present.<br />
The shock absorber appears damaged.<br />
All Ironman 4x4 shock absorbers are twin tube construction, this means they are very<br />
resilient to damage from rocks and debris. The outer tube can tolerate dents providing no<br />
puncture exists, the shock absorber will still function as intended.<br />
Do not allow mud or debris to accumulate for extended periods around suspension<br />
components, clean and rinse as soon as practical.<br />
Dust shields or rubber protective boots are provided by Ironman 4x4 to protect the piston<br />
rod from rock and debris damage.<br />
Spare parts such as bushes, boots and dust shields are often available as spare parts if<br />
required.<br />
The lower strut bushes have perished.<br />
This is most likely as a result of the bushes being tightened without neutralisation.<br />
Never tighten shock absorber bushes until the vehicle is lowered to the ground.<br />
Leave eye ring mounts finger tight ONLY, until the vehicle is lowered to the ground at normal<br />
ride height, failure to do this can damage the rubber bond due to twisting resulting in<br />
premature bush wear.<br />
This is particularly important for load bearing lower strut bush applications.<br />
Once the vehicle is lowered to the ground, only then tighten to specified tensions.<br />
Ironman 4x4 always recommends to renew leaf spring bushes with polyurethane when new<br />
springs are fitted. The extended range of travel provided by Ironman leaf springs and longer<br />
shock absorbers can over-rotate and damage the rubber material. In all cases when a silent<br />
block press fit bush is used, it cannot be transferred to an Ironman 4x4 leaf spring.<br />
Original two-piece rubber bushes will fit Ironman 4x4 leaf springs, however it is not<br />
recommended. When greased, polyurethane allows greater rotational freedom on the<br />
shackle pins when compared to rubber.<br />
Does polyurethane require re-greasing?<br />
Yes, polyurethane bushes should be re-greased as part of a regular maintenance schedule.<br />
Ironman 4x4 recommend a Molybdenum Disulphide based grease or other grease specified<br />
for use with polyurethane.<br />
Can I use Ironman 4x4 shock absorbers<br />
with original springs?<br />
Yes, in all cases. (Except those specified for racing or offroad only applications such as<br />
4” or 6” lift). Ironman 4x4 design all suspension components to be compatible with OEM<br />
suspension components.<br />
For optimal performance, Ironman 4x4 do recommend Ironman 4X4 shock absorbers are<br />
fitted as part of an integrated suspension system comprising Ironman 4x4 springs.<br />
Can I use Ironman 4x4 springs<br />
with original shock absorbers?<br />
Yes, in all cases. (Except those specified for racing or offroad only applications such as<br />
4” or 6” lift). Ironman 4x4 design all suspension components to be compatible with OEM<br />
suspension components.<br />
For optimal performance, Ironman 4x4 do recommend Ironman 4x4 springs are fitted as<br />
part of an integrated suspension system comprising Ironman 4x4 shock absorbers.<br />
The springs appear to be sagging.<br />
Refer to completed installation form to measure and compare with new ride height.<br />
Ironman 4x4 design an array of different springs to suit different load applications. It is<br />
imperative the correct spring is selected for the expected loads.<br />
Installing a spring which is too soft for the load will result in loss of expected ride height.<br />
Installing a spring which is too strong for the load will result in excessive ride height.<br />
To properly determine whether a spring has sagged or is under-specified, the spring must<br />
be removed from the vehicle and free height checked against the original specification<br />
found in suspension catalogue.<br />
Depending on spring size and rate, a loss of up to 10mm due to natural steel relaxation is<br />
considered normal.<br />
Natural settling is expected within the first 2-3 months, after which the springs are<br />
expected to maintain height.<br />
If a spring has lost more than 10mm free height from new, they may require replacement.<br />
456 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
FAQ / Troubleshooting<br />
The vehicle is leaning to one side.<br />
There is a squeak coming from the suspension.<br />
Refer to completed installation form to measure and compare with new ride height.<br />
If a vehicle is leaning down on one corner, firstly ensure the vehicle is on level ground and<br />
then assess the weight distribution to ensure even placement of load and accessories.<br />
Many vehicle models exhibit an uneven weight distribution from factory, Ironman 4x4 adjust<br />
the spring height accordingly to level the vehicle.<br />
Check if springs are designated for Drivers Side (D/S) or Passengers Side (N/S) and ensure<br />
they are installed to the correct location.<br />
Typically the taller coils should be fitted to the heavier side of the vehicle.<br />
The vehicle is leaning towards front or back.<br />
Refer to completed installation form to measure and compare with new ride height.<br />
Typically if the vehicle is level from side to side, but down at front or back, indicates<br />
incorrect spring selection. Check springs are correctly specified to match the load and<br />
accessories.<br />
Vehicles which feature independent suspension are generally subject to a 2:1 motion ratio,<br />
meaning that for every 1mm of movement at the spring, the ride height is affected 2mm.<br />
This is particularly important when assessing spring settling or sag. Natural settling of<br />
10mm at the spring will result in 20mm setting of ride height. Settling of new rubbers and<br />
bushes should also be factored as they will contribute a few additional mm.<br />
The shock absorber feels too soft<br />
or inconsistent when compressed.<br />
Prime the shock absorber by fully pumping it upright 2-3 times, ensuring the pressure<br />
chambers are fully purged of gas or air bubbles.<br />
The shock absorber will generally feel firmer to extend than it will to compress.<br />
The ride height is too high or banging over bumps.<br />
Independent suspension operates with limited wheel travel. Ironman 4x4 design springs to<br />
increase the ride height a prescribed amount within the safe limits of the original vehicles<br />
design.<br />
If incorrectly specified springs or additional spacers are fitted, the ride height may be<br />
excessive causing the strut to reach its upper limit “top out” during motion.<br />
As a general rule, Ironman 4x4 recommend a MINIMUM of 60mm downward travel available<br />
in the suspension, otherwise referred to as “droop”.<br />
To establish ride height in relation to maximum height, a droop measurement will be<br />
required.<br />
DROOP MEASUREMENT<br />
1) Measure and record the vertical rim to guard distance with the vehicle on flat level<br />
ground.<br />
2) Raise and support the vehicle with front or rear wheels hanging.<br />
3) Measure and record the vertical rim to guard distance with the wheels fully hanging.<br />
The difference between the two measurements is the amount of downward droop the<br />
suspension has available to it.<br />
The minimum droop distance should be no less than 60mm fully settled.<br />
If droop is less than 60mm, a reduction in handling performance will be experienced,<br />
possibility of damage to suspension, driveline and tyre wear can be a factor. In this case the<br />
ride height must be lowered.<br />
A squeak can originate from any number of sources or for many reasons. The most effective<br />
method to diagnose and resolve a squeak is to perform a systematic approach to locating<br />
the source. Make note of what conditions cause the squeak, ie. large bumps, small bumps,<br />
wet weather, cornering etc. Also note the type of noise whether it appears to be from a soft<br />
rubber / plastic origin or hard steel origin.<br />
Attempt should be made to simulate the condition, such as bouncing the vehicle whilst<br />
listening to locate the source, it may be required to enlist a second person to bounce the<br />
vehicle whilst another accesses the underneath of the vehicle closely to pin point the exact<br />
location.<br />
Typical sources for noise include:<br />
Dry or broken bushes<br />
Loose or misaligned components<br />
Bent or damaged components<br />
Steel to Steel friction<br />
Under-tensioned bolts<br />
The suspension appears to be rusty.<br />
In many cases, damage to spring or shock absorber coating is unavoidable due to impacts<br />
with stones and debris. In some instances light surface rusting may appear on exposed<br />
steel if coating becomes damaged. This will not affect the performance of the product<br />
however may be unsightly. Take care when using a high pressure washer or strong<br />
chemicals during cleaning as this can further compromise the coating leading to greater<br />
exposure.<br />
Care should be taken during installation to ensure components are not scratched or<br />
damaged which may result in exposure of the underlying steel.<br />
Vehicles operating in salty environments may experience further accelerated surface<br />
rusting.<br />
There is a vibration after fitting the suspension.<br />
This is a known issue in some vehicles after ride height has been raised. It is caused by the<br />
change in angle within the driveline, most commonly in vehicles with 2 piece driveshafts.<br />
In many cases where vibration is a common factor, Ironman 4x4 offer a solution such as a<br />
driveline spacer kit to adjust the angles of the driveshaft. The spacer kits are used to adjust<br />
the location of the centre bearing with view to reduce the vibration to a satisfactory level.<br />
Each vehicle can vary in severity, some may not be fully rectified after the re-alignment.<br />
In such cases axle wedges or a reduction in ride height may be required.<br />
Can I adjust the strut seat height?<br />
Ironman 4x4 struts feature an adjustable height spring seat. 12xxx & 24xxx series struts<br />
utilise a trim packer system, 45xxx series struts utilise a threaded strut body.<br />
Seat height cannot be adjusted whilst in vehicle, strut must be removed from vehicle with<br />
spring tension unloaded to enable adjustment.<br />
The purpose of this adjustment feature is to allow recalibration of ride height following the<br />
installation of heavy accessories or to compensate spring settling.<br />
Not to be used as a variable ride height system.<br />
An increase in seat height beyond OEM specifications may result in excessive lift and<br />
non-compliance to state or federal laws.<br />
A minimum 60mm suspension droop must be available at all times.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
457
SUSPENSION - TECHNICAL SPECIFICATIONS<br />
458 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
Accessories<br />
Specifications<br />
Effective 1 August 2023<br />
459
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Winches<br />
WINCHES<br />
Part Number Capacity Cable Material Cable Diameter Motor<br />
Gear Train /<br />
Reduction Ratio<br />
Hand Control Range Brake Battery Weight<br />
WWB9500 4.3t / 9500lb Steel<br />
28m / 8.3mm<br />
(91ft / 21/64”)<br />
5.5hp / 4.1kw<br />
Series Wound<br />
3-Stage Planetary<br />
265:1<br />
Wireless - 30.5m (100ft)<br />
Cord - 3.6m (12ft)<br />
Auto Cam Lock<br />
(In Drum)<br />
650CCA<br />
Min. for Winching<br />
N.W 42kg (92.5lb)<br />
WWB12000 5.4t / 12000lb Steel<br />
28m / 9.5mm<br />
(91ft / 3/8”)<br />
6.4hp / 4.5kw<br />
Series Wound<br />
3-Stage Planetary<br />
265:1<br />
Wireless - 30.5m (100ft)<br />
Cord - 3.6m (12ft)<br />
Auto Cam Lock<br />
(In Drum)<br />
650CCA<br />
Min. for Winching<br />
N.W 44kg (97lb)<br />
WWB9500SR 4.3t / 9500lb Synthetic Rope<br />
28m / 8mm<br />
(91ft / 5/16”)<br />
5.5hp / 4.1kw<br />
Series Wound<br />
3-Stage Planetary<br />
265:1<br />
Wireless - 30.5m (100ft)<br />
Cord - 3.6m (12ft)<br />
Auto Cam Lock<br />
(In Drum)<br />
650CCA<br />
Min. for Winching<br />
N.W 28kg (62lb)<br />
WWB12000SR 5.4t / 12000lb Synthetic Rope<br />
28m / 9mm<br />
(91ft / 23/64”)<br />
6.4hp / 4.5kw<br />
Series Wound<br />
3-Stage Planetary<br />
265:1<br />
Wireless - 30.5m (100ft)<br />
Cord - 3.6m (12ft)<br />
Auto Cam Lock<br />
(In Drum)<br />
650CCA<br />
Min. for Winching<br />
N.W 29kg (64lb)<br />
165mm<br />
218mm to Clear<br />
114.3mm<br />
150mm<br />
161mm<br />
254mm<br />
125mm<br />
224mm<br />
540mm<br />
161mm<br />
254mm<br />
125mm<br />
Side View<br />
Bolting Pattern<br />
TROUBLESHOOTING<br />
Problem Possible cause Possible solution<br />
Winch not operating Flat battery in vehicle. Replace or recharge battery.<br />
NOTE: Winch should always be connected to the main battery, not auxiliary battery.<br />
Flat battery in wireless remote controller.<br />
Replace battery or use the plug-in controller.<br />
Winch has been wired incorrectly.<br />
Poor motor earth.<br />
Check all wiring is correct as shown in the installation manual.<br />
Make sure earth cable for the motor is connected to the main battery.<br />
Poor control box earth.<br />
Wireless activator or the plug-in hand controller are<br />
not connected to control box.<br />
Make sure small earth wire for the control box is securely connected to a good earth (eg.<br />
Earth stud on winch motor).<br />
Connect wireless activator or the plug-in hand controller to the control box, ensuring the<br />
hand controller is switched to the correct mode.<br />
Hand controller will not operate. Incorrect mode selected on hand controller. Select wireless or plug-in mode on the hand controller.<br />
Winch operates in wrong<br />
direction.<br />
Cable spooled in the wrong direction on the drum.<br />
Winch has been wired incorrectly.<br />
Ensure the cable is spooled on in the direction as indicated on the winch housing.<br />
Check all connections to the motor are as shown in the installation manual.<br />
Winch only opertates in one Winch has been wired incorrectly.<br />
Check all connections to the motor are as shown in the installation manual.<br />
direction.<br />
Brake will not hold on hills. Cable spooled in the wrong direction on the drum. Ensure the cable is spooled on in the direction as indicated on the winch housing.<br />
Clutch handle is difficult to<br />
rotate.<br />
Winch motor gets hot during<br />
winching.<br />
Load has not been released from cable.<br />
This is quite normal.<br />
Winch will not free-spool. Clutch handle is in the ‘Engage’ position. Rotate handle to the ‘Disengage’ position.<br />
Using the hand controller, spool cable out slightly to release the load from the cable.<br />
Winch needs to be checked regularly during winching. If winch motor is uncomfortably<br />
warm to touch, cease operation until winch has cooled down.<br />
Winch motor operates, but<br />
cable drum does not turn.<br />
Uneven winch mounting surface.<br />
Clutch handle is in the ‘Disengage’ position.<br />
Ensure winch mounting surface is flat, not distorted and winch mounting bolts are tight.<br />
Rotate handle to the ‘Engage’ position.<br />
460 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Bull Bars<br />
BULL BARS<br />
IMPORTANT: IRONMAN 4X4 BULL BARS CONFORM TO AUSTRALIAN STANDARDS AS47861.1/2002<br />
• Scanned in 3D to ensure a correct and accurate fit with a stylish,<br />
but dependable design<br />
• Ironman 4x4 bull bars are tested for ADR, Airbag compliance and<br />
compatibility with vehicle safety systems<br />
• Made from the highest quality of SPHC oil and pickled steel (not mild<br />
steel) for maximum strength and highest resistance to rust<br />
• Ironman 4x4 bull bars are CNC laser cut, bent and robot welded for<br />
optimum accuracy and finish<br />
• Ironman 4x4 designed and engineered to ensure Airbag compatibility<br />
• Winch compatible and use a unique mounting cradle to remove excess<br />
weight from the bull bar<br />
• Black powdercoating using AKZO NOBEL powder (YN100G) allows a<br />
thicker, smoother and more durable coating<br />
• Ironman 4x4 designed aerial mount for quick installation and<br />
removal of an aerial<br />
• Integrated spot light or light bar mounts<br />
360º ROBOT WELDS FOG LIGHTS LED PARKER / SPOT OR LIGHT BAR AERIAL MOUNT<br />
INDICATOR LIGHTS<br />
MOUNTS<br />
COMMERCIAL<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• Winch compatible<br />
• Aerial mount<br />
BBC<br />
• Steel construction<br />
• A-Frame triple loop design<br />
• Tough polyurethane bumpers<br />
• LED parker / indicator included<br />
COMMERCIAL DELUXE<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• Winch compatible<br />
• Aerial mount<br />
• Steel construction<br />
BBCD<br />
• A-Frame triple loop design<br />
• Tough polyurethane bumpers<br />
• Fog lights (55W H3)<br />
• LED parker / indicator included<br />
PROTECTOR<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• Winch compatible<br />
• Aerial mount<br />
• Steel construction<br />
BBT<br />
• Stainless steel triple loop design<br />
• Tough polyurethane bumpers<br />
• Fog lights (55W H3)<br />
• LED parker / indicator included<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
461
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Bull Bars<br />
BULL BARS<br />
POLISHED ALLOY<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• Winch compatible<br />
• Aerial mount<br />
• 5mm aluminium frame<br />
BBA<br />
• 5mm sub frame<br />
• 35% lighter than steel<br />
• A-Frame triple loop design<br />
• Tough polyurethane bumpers<br />
• LED parker / indicator included<br />
PREMIUM COMMERCIAL DELUXE<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• 60.3mm steel tube construction<br />
• Winch compatible<br />
• Aerial mount<br />
BBP<br />
• A-Frame triple loop design<br />
• Tough polyurethane bumpers<br />
• Fog lights (55W H3)<br />
• LED parker / indicator included<br />
PROGUARD NO LOOP<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• Winch compatible<br />
• Steel construction<br />
BBT<br />
• Tough polyurethane bumpers<br />
• Fog lights (55W H3)<br />
• LED parker / indicator included<br />
• Single or triple loop options<br />
available<br />
RAID SERIES<br />
• ADR 69, 73 compliant<br />
• Air bag tested and certified<br />
• Winch compatible<br />
BBR<br />
• Steel construction<br />
• Integrated recovery points<br />
• Cube lights and lightbars shown<br />
are available as additional options<br />
462 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Bull Bars, Rear Tow Bars,<br />
Side Steps / Rails and Recovery Points<br />
Panel Protection and Recovery<br />
TO SUIT VEHICLE MAKE AND MODEL<br />
Commercial<br />
Commercial<br />
Deluxe<br />
Proguard<br />
No Loop 3 Premium Raid Raid/Special<br />
Approximate Weight 86kg 86 kg 75kg 92kg 75kg - - 30kg 69kg 40kg 13kg 53kg<br />
Tube Diameter 51mm 51mm - 60.3mm - - - - - 51/60.3mm 51/60.3mm 51/60.3mm<br />
To Suit Fiat Fullback 2016+ BBC050 BBCD050 BBT050-NL IRP050 TB050 RTB050 SS050 SS050 RAIL SSR050 47<br />
To Suit Ford Bronco 2020+<br />
BBR089<br />
Integrated<br />
in Bar<br />
RTB089 SS089 50<br />
To Suit Ford Everest Next-Gen 2022+<br />
To Suit Ford Everest AU II 7/2018-2022<br />
WITH or WITHOUT Tech Pack Adaptive Cruise Control (CC)<br />
To Suit Ford Everest AU II 7/2018-2022<br />
WITHOUT Tech Pack Adaptive CC With Sensor Provisions<br />
To Suit Ford Everest 2015-6/2018<br />
WITH or WITHOUT Tech Pack Adaptive Cruise Control (CC)<br />
To Suit Ford Everest 2015-6/2018<br />
WITHOUT Tech Pack Adaptive CC With Sensor Provisions<br />
BBCD115*<br />
BBR110<br />
BBR110-P<br />
Recovery<br />
Points<br />
Integrated<br />
in Bar<br />
Tow Bars<br />
Rear Step<br />
Bars<br />
Side Steps<br />
Side Rails<br />
Side Steps<br />
and Rails<br />
Page<br />
SS115-D SS115 RAIL SSR115-D 76<br />
BBCD066* BBT066-NL* IRP054 SS055 SS055 RAIL SSR055 78<br />
BBC055 BBCD055 IRP054 SS055 SS055 RAIL SSR055 78<br />
BBCD054 BBT054-NL IRP054 SS055 SS055 RAIL SSR055 80<br />
BBC055 BBCD055 IRP054 SS055 SS055 RAIL SSR055 80<br />
To Suit Ford F150 Series 14 2021+ BBP109 52<br />
To Suit Ford F150 Series 13 2015-2020 RTB086 SS086 55<br />
To Suit Ford Maverick 1988-1994 (See Nissan GQ Patrol) BBCD010 228<br />
To Suit Ford Ranger Next-Gen 2022+ BBC110 BBCD110 BBP110 BBR110<br />
To Suit Ford Ranger PX Mk III 8/2018-2022<br />
WITH or WITHOUT Tech Pack Adaptive Cruise Control (CC)<br />
To Suit Ford Ranger PX Mk III 8/2018-2022<br />
WITHOUT Tech Pack Adaptive CC With Sensor Provisions<br />
To Suit Ford Ranger PX Mk II 2015-7/2018<br />
WITH or WITHOUT Tech Pack Adaptive Cruise Control (CC)<br />
To Suit Ford Ranger PX Mk II 2015-7/2018<br />
WITHOUT Tech Pack Adaptive CC With Sensor Provisions<br />
Integrated<br />
in Bar<br />
TB110<br />
RTB110<br />
RTB110-M<br />
RBP110<br />
SS110-D SS110 RAIL SSR110-D 58<br />
BBCD066* BBT066-NL* IRP054 TB066 RTB066 SS054 SS054 RAIL SSR054 62<br />
BBC055 BBCD055 IRP054 TB066 RTB066 SS054 SS054 RAIL SSR054 62<br />
BBCD054 BBT054-NL IRP054 TB066 RTB066 SS054 SS054 RAIL SSR054 66<br />
BBC055 BBCD055 IRP054 TB066 RTB066 SS054 SS054 RAIL SSR054 66<br />
To Suit Ford Ranger PX 9/2011-2015 BBC038 BBCD038 BBT038-NL IRP054 TB066 RTB066 SS054 SS054 RAIL SSR054 70<br />
To Suit Ford Ranger PJ / PK 2007+ 2 BBCD014 SS008 SSR002 74<br />
To Suit Ford Ranger Raptor 2022+ BBP111 RTB111 56<br />
To Suit Ford Ranger Raptor 2018-2022 RTB069 57<br />
To Suit GM/Chevrolet Silverado 1500 2019+<br />
BBR087E<br />
RTB087<br />
(US ONLY)<br />
SS087 82<br />
To Suit GM/Holden Trailblazer LT / LTZ 11/2017+ BBC057 BBCD057 BBT057-NL<br />
IRP057<br />
IRP058<br />
SS044 SS044 RAIL SSR044 88<br />
To Suit GM/Holden Colorado RG 11/2016-2020 BBC057 BBCD057 BBT057-NL<br />
IRP057<br />
IRP058<br />
TB040 RTB040<br />
SS057<br />
SS057-D SS057 RAIL SSR057<br />
SSR057-D 92<br />
To Suit GM/Holden Colorado RG 2012-10/2016 BBC040 BBCD040 IRP058 TB040 RTB040<br />
SS057<br />
SS057-D SS057 RAIL SSR057<br />
SSR057-D 95<br />
To Suit GM/Holden Colorado 7 RG 2012+ BBCD044 IRP058 SS044 SS044 RAIL SSR044 90<br />
To Suit GM/Holden Colorado RC 7/2008-12/2012 1 2 BBCD027 SS001 SSR006 99<br />
To Suit GM/Holden Rodeo RA7 2003-2012 BBCD020 SS001 SSR006 100<br />
To Suit GM/Holden Rodeo RA 2002-2006 2 BBCD003 SS001 SSR006 101<br />
To Suit Great Wall Ute Cannon 9/2020+ BBCD083 RTB083 SS083 SS083 RAIL SSR083 104<br />
To Suit Isuzu D-Max 8/2019+ BBC074 BBCD074 BBT074-NL BBR074 IRP074 TB074 RTB074 SS074-D SS074 RAIL SSR074-D 108<br />
To Suit Isuzu D-Max 2/2017-7/2019 (Will not fit narrow body) BBC058 BBCD058 BBT058-NL IRP058 TB041 RTB041<br />
SS057<br />
SS057-D SS057 RAIL SSR057<br />
SSR057D 111<br />
To Suit Isuzu D-Max 6/2012-1/2017 BBC041 BBCD041 IRP058 TB041 RTB041<br />
SS057<br />
SS057-D SS057 RAIL SSR057<br />
SSR057D 114<br />
To Suit Isuzu D-Max 2007-6/2012 2 BBCD020 SS001 SSR006 118<br />
To Suit Isuzu MU-X 8/2021+ BBCD095 BBT095-NL BBR095 IRP074 SS095-D SS095 RAIL SSR095-D 120<br />
To Suit Isuzu MU-X 3/2017-7/2021 BBCD061 BBT061-NL IRP058 SS044 SS044 RAIL SSR044 122<br />
To Suit Isuzu MU-X 2014-2/2017 BBCD049 IRP058 SS044 SS044 RAIL SSR044 122<br />
To Suit Jeep Gladiator JT 4/2019+ BBR077 - (Raid Full Length Bumper) BBR077ST 4 - (Raid Stubby Bumper) RTB077JT SS077JT 130<br />
To Suit Jeep Grand Cherokee WK2 2013+ 5 BBCD052 132<br />
To Suit Jeep Wrangler JL (4 Door) 2018+ BBR077 - (Raid Full Length Bumper) BBR077ST 4 - (Raid Stubby Bumper) TB077JL RTB077JL SS077JL 136<br />
To Suit Jeep Wrangler JK 2007+ BBCD035 138<br />
To Suit LDV T60 2017+ BBCD068* BBT068-NL* 154<br />
NOTES: * Only compatible with Synthetic Rope Winch and Alloy Hawse.<br />
†<br />
Suits narrow body model.<br />
1<br />
Suits flared guard model.<br />
2<br />
Suits both 2WD and 4WD models.<br />
3<br />
Single and triple loop options available.<br />
4<br />
Not available in Australia.<br />
5<br />
Not suitable for vehicles with forward facing radar.<br />
6<br />
Not compatible with V6 model.<br />
7<br />
Suits GX model only.<br />
8<br />
Not compatible with sensors and headlight washers.<br />
9<br />
Narrow body Aus and NZ only.<br />
9<br />
Narrow body excludes Aus and NZ.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
463
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Panel Protection and Recovery<br />
Bull Bars, Rear Tow Bars,<br />
Side Steps / Rails and Recovery Points<br />
TO SUIT VEHICLE MAKE AND MODEL<br />
Commercial<br />
Commercial<br />
Deluxe<br />
Proguard<br />
No Loop 3 Premium Raid Raid/Special<br />
Recovery<br />
Points<br />
Tow Bars<br />
Rear Step<br />
Bars<br />
Side Steps<br />
Side Rails<br />
Side Steps<br />
and Rails<br />
Approximate Weight 86kg 86 kg 75kg 92kg 75kg - - 30kg 69kg 40kg 13kg 53kg<br />
Tube Diameter 51mm 51mm - 60.3mm - - - - - 51/60.3mm 51/60.3mm 51/60.3mm<br />
To Suit Mazda BT50 6/2020+ BBC080 BBCD080 BBT080-NL BBR080 IRP080 TB080 RTB080 SS074-D SS074 RAIL SSR074-D 159<br />
To Suit Mazda BT50 2012-5/2020 2 BBC039 BBCD039 BBT039-NL IRP054 TB066 RTB066 SSR039 162<br />
To Suit Mazda BT50 J97M 2006-2011 1 2 BBCD024 SS009 SSR007 166<br />
To Suit Mitsubishi Pajero Sport 7/2019+ BBCD079* BBT079-NL* IRP059 SS079 174<br />
Page<br />
To Suit Mitsubishi Pajero Sport 11/2016-6/2019<br />
(BBCD suits GLX and GLS only)<br />
BBCD059* BBT059-NL* IRP059 SS059 176<br />
To Suit Mitsubishi Pajero NW 2011-NX BBCD045 178<br />
To Suit Mitsubishi Pajero NS & NT 5/2000-2011 BBCD045 179<br />
To Suit Mitsubishi Triton MR (GLS Model) 11/2018+ BBC067* BBCD067* BBT067-NL* IRP059 TB050 RTB067GLS SS050 SS050 RAIL SSR050 190<br />
To Suit Mitsubishi Triton MR (Non-GLS Model) 11/2018+ BBC067* BBCD067* BBT067-NL* IRP059 TB050 RTB067GLX SS050 SS050 RAIL SSR050 190<br />
To Suit Mitsubishi Triton MQ 2015-10/2018 BBC050 BBCD050 BBT050-NL IRP050 TB050 RTB050 SS050 SS050 RAIL SSR050 194<br />
To Suit Mitsubishi Triton MN 2009-2015 1 2 BBC031 BBCD031 SS031 SSR031 199<br />
To Suit Mitsubishi Triton ML 2006-2009 1 2 BBCD016 SSR031 202<br />
To Suit Nissan Navara NP300 2021+ (Series 5) BBCD082 BBT082-NL BBR082 IRP005 RTB082<br />
SS048-D /<br />
SSP082<br />
SS082 RAIL /<br />
SSP082 RAIL SSR048-D SSRP082 / 208<br />
To Suit Nissan Navara NP300 2015-2020 (Series 1-4) BBC048 BBCD048 BBT048-NL BBR048 IRP005 TB048 RTB048 SS048-D SS048 RAIL SSR048-D 212<br />
To Suit Nissan Navara D40 2 (Does not suit 2010+ STX - Spain Build) BBCD012 IRP005 SS007 SSR003 217<br />
To Suit Nissan Navara D40 V6 2010+ STX 2 BBCD042 IRP005 SS042 SSR042 217<br />
To Suit Nissan Navara D22 2002+ 1 2 BBCD013 220<br />
To Suit Nissan Pathfinder R51 2005-2013 BBCD012 224<br />
To Suit Nissan Pathfinder R51 2010+ (Spain Built) BBCD042 224<br />
To Suit Nissan Patrol Y62 2020+ BBP084 SSP084 SSP084 RAIL SSRPO084 230<br />
To Suit Nissan Patrol Y62 2010-2019 BBP062 230<br />
To Suit Nissan Patrol Y61 GU Series 4 2005+ 1 BBP011 IRP005 SS012<br />
To Suit Nissan Patrol Y61 GU Series 1-3 1998-2004 1<br />
(Coil Spring Only)<br />
SSR012 /<br />
SSRP011 232<br />
BBCD009 IRP005 SS012 SSR012 233<br />
To Suit Nissan Patrol Y60 GQ 1987-1997 1 (Coil Spring Only) BBCD010 241<br />
To Suit Ram 1500 DT 6/2018+ BBR085E RTB085AU SS085 251<br />
To Suit Ram 1500 DS 2014+ BBP075 BBR075E RTB075AU SS075 252<br />
To Suit Renault Alaskan 2017+ (Thai Built Only) BBC048 BBCD048 BBT048-NL TB048 RTB048 SS048-D SS048 RAIL SSR048-D 254<br />
To Suit SsangYong Musso Q200 / 201 / 205 / 215 2022+ BBCD088* 257<br />
To Suit SsangYong Musso Q200 / 201 / 205 10/2018+ BBCD071* 257<br />
To Suit SsangYong Rexton Y400 10/2018+ BBCD071* 262<br />
To Suit Subaru XV Crosstrek 2018+ ITBR094 267<br />
To Suit Suzuki Jimny GJ 2019+ BBCD070* BBS070* IRP070 SS070 268<br />
To Suit Suzuki Jimny 2012-2018 BBCD063* 270<br />
To Suit Suzuki Grand Vitara 2012+ 6 (Diesel Manual Only) BBCD046 274<br />
To Suit Toyota 4Runner Gen 5 N280 2009+ BBR078 4 RTB078 SS078 278<br />
To Suit Toyota FJ Cruiser 2006+ BBCD037 284<br />
To Suit Toyota Fortuner 2020+ (facelift) BBCD081 BBT081-NL IRP051 SS053-D SS053 RAIL SSR053-D 286<br />
To Suit Toyota Fortuner 2015-9/2020 BBCD053 BBT053-NL IRP051 SS053-D SS053 RAIL SSR053-D 286<br />
To Suit Toyota Hilux Rogue (Wide Body) 2022+ 293<br />
To Suit Toyota Hilux (Standard Body) 8/2020+ BBCD076 BBT076-NL IRP051 TB051<br />
RTB051-SP<br />
RTB051-SPR<br />
SS051-D SS051 RAIL SSR051-D 296<br />
To Suit Toyota Hilux (Narrow Body) 8/2020+ BBC065-NB BBCD076-NB IRP051 TB051<br />
RTB051-SP<br />
RTB051-SPR<br />
SS051-D SS051 RAIL SSR051-D 296<br />
To Suit Toyota Hilux Revo (Wide Body) 5/2018-7/2020 BBC065 BBCD065 BBT065-NL IRP051 TB051 RTB051-SP SS051-D SS051 RAIL SSR051-D 300<br />
To Suit Toyota Hilux Revo (Wide Body) 2015-4/2018 BBC051 BBCD051 BBT051-NL IRP051 TB051 RTB051-SP SS051-D SS051 RAIL SSR051-D 300<br />
464 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Bull Bars, Rear Tow Bars,<br />
Side Steps / Rails and Recovery Points<br />
Panel Protection and Recovery<br />
TO SUIT VEHICLE MAKE AND MODEL<br />
Commercial<br />
Commercial<br />
Deluxe<br />
Proguard<br />
No Loop 3 Premium Raid Raid/Special<br />
Recovery<br />
Points<br />
Tow Bars<br />
Rear Step<br />
Bars<br />
Side Steps<br />
Side Rails<br />
Side Steps<br />
and Rails<br />
Approximate Weight 86kg 86 kg 75kg 92kg 75kg - - 30kg 69kg 40kg 13kg 53kg<br />
Tube Diameter 51mm 51mm - 60.3mm - - - - - 51/60.3mm 51/60.3mm 51/60.3mm<br />
To Suit Toyota Hilux Vigo 10/2011-2015 1 BBC033 BBCD033 IRP033 SS033-D SSR033-D 304<br />
To Suit Toyota Hilux Vigo 3/2005-9/2011 1 BBC002 BBCD002 IRP033 SS033-D SSR033-D 304<br />
To Suit Toyota Hilux Tiger 1997-2004 IFS 1 BBCD001 308<br />
To Suit Toyota Landcruiser 300 Series 2022+ BBC090 BBCD090<br />
To Suit Toyota Landcruiser 200 Series 11/2015+<br />
To Suit Toyota Landcruiser 200 Series /<br />
Lexus LX 570 2/2012-10/2015<br />
To Suit Toyota Landcruiser 200 Series /<br />
Lexus LX570 11/2007-1/2012<br />
BBP090<br />
BBR090<br />
BBR090P<br />
Page<br />
IRP090 SSP090 SSRP090 312<br />
BBT-<br />
056VX-NL*<br />
BBP056-VX* IRP056 SSP056 SSP056 RAIL SSRP056 314<br />
BBP043 IRP056 316<br />
BBP025 IRP056 316<br />
To Suit Toyota Landcruiser 105 Series 3/1998-10/2007 BBCD005 IRP005 318<br />
To Suit Toyota Landcruiser 100 Series IFS /<br />
Lexus LX470 3/1998-10/2007<br />
To Suit Toyota Landcruiser 80 Series /<br />
Lexus LX 450 1990-1998<br />
BBCD006 IRP005 321<br />
BBCD004 IRP005 323<br />
To Suit Toyota Landcruiser 79 Series<br />
Single Cab 9/2016+ 1 BBC019SC BBP019SC IRP019SC<br />
SS019SC /<br />
SSP019SC<br />
SS019SC RAIL/ SSR019SC /<br />
SSP019SC RAIL SSRP019SC 326<br />
To Suit Toyota Landcruiser 79 Series<br />
Single Cab 2007-8/2016 1 BBC019E BBP019E IRP019 SS016-D SSR016-D /<br />
SSRP016 326<br />
To Suit Toyota Landcruiser 79 Series Single Cab 1999-2007 1 BBCD018 326<br />
To Suit Toyota Landcruiser 79 Series Dual Cab 11/2012+ 1 BBC019E BBP019E BBR019 IRP019 SS019-D<br />
SSR019-D /<br />
SSRP019 329<br />
To Suit Toyota Landcruiser 78 Series Troop Carrier 2007+ 1 BBC019E BBP019E BBR019 IRP019 333<br />
To Suit Toyota Landcruiser 78 Series Troop Carrier 1999-2007+ 1 BBCD018 337<br />
To Suit Toyota Landcruiser 76 Series 2007+ 1 BBC019E BBP019E BBR019 IRP019 SS015<br />
SSR015 /<br />
SSRP015 341<br />
To Suit Toyota Landcruiser 75 Series 1984-1999 BBCD018 344<br />
To Suit Toyota Prado 150 Series Facelift 11/2017+ BBT064-NL* BBP064* BBR064 IRP064 SSP064-D SSP064 RAIL SSRP064-D 358<br />
To Suit Toyota Prado 150 Series 10/2013-10/2017 BBC047 BBCD047 IRP064 SS047-D SSR047-D 361<br />
To Suit Toyota Prado 150 Series 11/2009-10/2013 BBCD029 8 IRP064 SS047-D SSR047-D 361<br />
To Suit Toyota Prado 120 Series 4/2003-10/2009 1 BBCD008 SS017 SSR004 364<br />
To Suit Toyota Prado 90, 95 Series 1996-10/2002 1 BBCD007 366<br />
To Suit Toyota Rav4 2019+ ITBR091 RTB091 283<br />
To Suit Toyota Tacoma 2005+ BBR072 RTB072<br />
SS072 /<br />
SS072L 368<br />
To Suit Toyota Tundra 2022+ BBT098-NL BBP098 BBR098 RTB098 SS098 370<br />
To Suit Toyota Tundra 2013-2021 BBR073 RTB073 SS073 372<br />
To Suit <strong>Vol</strong>kswagen Amarok 2023+ BBCD112 BBR112 RTB060 SS110-D 378<br />
To Suit <strong>Vol</strong>kswagen Amarok V6 / 4 Cyl 11/2016+ BBCD060 BBT060-NL RTB060 SS034 SS034 RAIL SSR034 380<br />
To Suit <strong>Vol</strong>kswagen Amarok 2011-10/2016 BBCD034 SS034 SS034 RAIL SSR034 382<br />
NOTES: * Only compatible with Synthetic Rope Winch and Alloy Hawse.<br />
†<br />
Suits narrow body model.<br />
1<br />
Suits flared guard model.<br />
2<br />
Suits both 2WD and 4WD models.<br />
3<br />
Single and triple loop options available.<br />
4<br />
Not available in Australia.<br />
5<br />
Not suitable for vehicles with forward facing radar.<br />
6<br />
Not compatible with V6 model.<br />
7<br />
Suits GX model only.<br />
8<br />
Not compatible with sensors and headlight washers.<br />
9<br />
Narrow body Aus and NZ only.<br />
9<br />
Narrow body excludes Aus and NZ.<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
465
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Snorkels<br />
SNORKELS<br />
Vehicle Make Model and Specifics 3” Hat 3.5” Hat 4” Hat Part Number Page<br />
To Suit Fiat Fullback 2016+ • ISNORKEL050 47<br />
To Suit Ford Maverick 1988-1994 - (All models except 2.8L Diesel) • ISNORKEL011 241<br />
To Suit Ford Ranger Next-Gen 2022 • ISNORKEL110 58<br />
To Suit Ford Ranger PX III XL 8/2018+ 3.2L Diesel (with side indicator) • ISNORKEL034 62<br />
To Suit Ford Ranger / Everest PX III XLT 8/2018+ 3.2L Diesel (with indicator on side mirror) / UAII • ISNORKEL034XLT 62, 78<br />
To Suit Ford Ranger PX / PX II XL 7/2011+ 2.2 and 3.2L Diesel • ISNORKEL034 66, 70<br />
To Suit Ford Ranger PX / PX II XLT 7/2011+ 2.2 and 3.2L Diesel • ISNORKEL034XLT 66, 70<br />
To Suit Ford Ranger PJ / PK 2006-2011+ - 3.0L TDi Diesel • ISNORKEL021 74<br />
To Suit GM / Holden Trailblazer LT LTZ 2017+ • ISNORKEL036 88<br />
To Suit GM / Holden Colorado / Colorado 7 RG 2012-2020 • ISNORKEL036 90, 92, 94<br />
To Suit GM / Holden Colorado RC 2008-2012 • ISNORKEL028 99<br />
To Suit GM / Holden Rodeo RA7 LX and LT 2007-7/2008 - (Does not fit DX Model) • ISNORKEL022 100<br />
To Suit Isuzu D-Max 8/2019+ • ISNORKEL074 108<br />
To Suit Isuzu D-Max 6/2012 to 7/2019 • ISNORKEL041 111, 114<br />
To Suit Isuzu D-Max 2009-2012 - (Does not fit 4x2 SX Model) • ISNORKEL022 118<br />
To Suit Isuzu MU-X 8/2021+ • ISNORKEL074 120<br />
To Suit Isuzu MU-X 2014 to 7/2021 • ISNORKEL041 122<br />
To Suit Jeep Wrangler JK 2007+ (Not available in Australia) • ISNORKEL032 138<br />
To Suit Mazda BT50 6/2020+ • ISNORKEL080 159<br />
To Suit Mazda BT50 11/2006-2012 - 3.0L TDi Diesel • ISNORKEL024 166<br />
To Suit Mitsubishi Pajero Sport 7/2019+ • ISNORKEL067 174<br />
To Suit Mitsubishi Triton MR 11/2018+ • ISNORKEL067 190<br />
To Suit Mitsubishi Triton MQ 2015-10/2018 - 2.4L Diesel • ISNORKEL050 194<br />
To Suit Mitsubishi Triton ML / MN 2006-2015 • ISNORKEL020 199, 202<br />
To Suit Nissan Navara NP300 2015+ - Suits Wide and Narrow Body 2.3L Twin and Single Turbo Diesel • ISNORKEL048 208, 212<br />
To Suit Nissan Navara D40 2005+ (Does not suit 2010+ STX - Spain Build Single Cab) • ISNORKEL019 217<br />
To Suit Nissan Pathfinder R51 2005-2013 • ISNORKEL019 224<br />
To Suit Nissan Patrol GU Series 4 2005+ • ISNORKEL013 232<br />
To Suit Nissan Patrol GU Series 1, 2 and 3 1998-2004 • ISNORKEL015 219<br />
To Suit Nissan Patrol GQ 1987-1997 - (All models except 2.8L Diesel) • ISNORKEL011 241<br />
To Suit Suzuki Jimny GJ 2018+ • ISNORKEL070 268<br />
To Suit Toyota Fortuner 2015+ • ISNORKEL053 284<br />
To Suit Toyota Hilux 8/2020+ 2.8L Turbo Diesel • ISNORKEL051 296<br />
To Suit Toyota Hilux 8/2020+ Narrow Body Model • ISNORKEL076N 296<br />
To Suit Toyota Hilux Revo 2015-7/2020 - 2.8L Turbo Diesel • ISNORKEL051 300<br />
To Suit Toyota Hilux Vigo 2005-2015 - 3.0L TDi, 4.0L Petrol V6 • ISNORKEL001 304<br />
To Suit Toyota Landcruiser 300 Series 2022+ • ISNORKEL090 312<br />
To Suit Toyota Landcruiser 200 Series 11/2015+ • ISNORKEL056 314<br />
To Suit Toyota Landcruiser 200 Series 11/2007-10/2015 • ISNORKEL010 316<br />
To Suit Toyota Landcruiser / Lexus 105 and 100 Series / LX 470 1998-2007 • ISNORKEL003 318, 321<br />
To Suit Toyota Landcruiser / Lexus 80 Series / LX 450 1990-1998 • ISNORKEL004 323<br />
To Suit Toyota Landcruiser 79 / 78 / 76 Series 2007+ • ISNORKEL023 326, 329, 333, 341<br />
To Suit Toyota Landcruiser 75, 78, 79 Series 1984-2007 • ISNORKEL009 326, 337, 344<br />
To Suit Toyota Prado 150 Series 11/2017+ 2.8L • ISNORKEL064 356<br />
To Suit Toyota Prado 150 Series 11/2009-10/2017 3L D4D TDi / 4L Petrol V6 and 2.8L D4D TDi • ISNORKEL035 361<br />
To Suit Toyota Prado 120 Series 2003-2009 3L D4D TDi / 4L Petrol V6 • ISNORKEL006 364<br />
To Suit Toyota Prado 90 / 95 Series 1996-2002 3.4L Petrol V6 • ISNORKEL005 366<br />
To Suit <strong>Vol</strong>kswagen Amarok 2011+ • ISNORKEL037 380, 382<br />
466 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Underbody Protection<br />
UNDERBODY PROTECTION<br />
Vehicle Make Model and Specifics Standard Part No. Premium Part No. Page<br />
To Suit Fiat Fullback 2016+ IUP050K UBP050 47<br />
To Suit Ford Ranger Next-Gen 2022+ UBP110 58<br />
To Suit Ford Ranger PX III 8/2018+ UBP055 62<br />
To Suit Ford Ranger PX II 2015-7/2018 IUP014K UBP054 / UBP055 66<br />
To Suit Ford Ranger PX 7/2011-2015 IUP014K UBP054 70<br />
To Suit Ford Everest Next-Gen 2022+ UBP110 76<br />
To Suit Ford Everest UA II 7/2018+ UBP055 78<br />
To Suit Ford Everest 9/2015-6/2018 IUP014K UBP054 80<br />
To Suit GM / Holden Colorado / Trailblazer RG 11/2016-2020 / Trailblazer LT / LTZ 2017+ UBP057 88, 92<br />
To Suit GM / Holden Colorado RG 2012-10/2016 / Colorado 7 RG 2012-2016 UBP041 90, 95<br />
To Suit GM / Holden Colorado RC 2008-2012 IUP009K 99<br />
To Suit GM / Holden Rodeo RA and RA7 2002-2008 IUP009K 100, 101<br />
To Suit Isuzu D-Max 8/2019+ UBP074 / UBP074S 108<br />
To Suit Isuzu D-Max / MU-X 6/2012 to 7/2019 / MU-X 2014 to 7/2021 UBP041 111, 114, 122<br />
To Suit Isuzu D-Max 2007-06/2012 IUP009K 118<br />
To Suit Isuzu MU-X 8/2021 UBP074S 120<br />
To Suit Mazda BT50 6/2020+ UBP074 / UBP074S 159<br />
To Suit Mazda BT50 2012-5/2020 IUP014K UBP054 / UBP055 162<br />
To Suit Mitsubishi Pajero Sport 7/2019+ UBP050 174<br />
To Suit Mitsubishi Triton MR and MQ 2015+ IUP050K UBP050 190, 194<br />
To Suit Mitsubishi Triton ML 2006-2009 IUP010F 202<br />
To Suit Nissan Navara NP300 2015+ Series 1 / Series 2-5 UBP048 / UBP048S 208, 212<br />
To Suit Nissan Navara D40 2005+ (Diesel only) IUP007K 217<br />
To Suit Ram 1500 DT 6/2018+ UBP085 251<br />
To Suit Ram 1500 DS 2014+ UBP075 252<br />
To Suit Renault Alaskan 2017+ Series 1 / Series 2-5 UBP048 / UBP048S 240<br />
To Suit SsangYong Musso / Rexton Q200, Q201, Q205 and Q215 / Y400 10/2018+ UBP201SY 257, 262<br />
To Suit Suzuki Jimny GJ 2018+ UBP070 268<br />
To Suit Toyota 4Runner Gen 5, N280 2009+ UBP047 278<br />
To Suit Toyota FJ Cruiser 2006+ UBP047 284<br />
To Suit Toyota Fortuner / Hilux 2015+ UBP051 286, 296, 300<br />
To Suit Toyota Hilux Rogue Wide Body 2022+ TBA 293<br />
To Suit Toyota Hilux Vigo 2005-2015 IUP001K UBP033 304<br />
To Suit Toyota Landcruiser 300 Series 2022+ UBP090 312<br />
To Suit Toyota Landcruiser 200 Series 2015+ UBP056 314<br />
To Suit Toyota Landcruiser 200 Series 11/2007-10/2015 IUP004K / IUP004F UBP056 316<br />
To Suit Toyota Landcruiser 79 Series S/C 2007-8/2016 / 79 Series D/C 11/2012+ / 78/76 Series 2007+ UBP019SC / UBP019 326, 329<br />
To Suit Toyota Landcruiser 78 Series 2007+ / 76 Series 2007+ UBP019 333, 341<br />
To Suit Toyota Prado 150 Series 11/2009+ UBP047 358, 361<br />
To Suit Toyota Tacoma 2005+ UBP072 368<br />
To Suit Toyota Tundra 2013-2022+ UBP098 370<br />
To Suit Toyota Tundra 2013-2020 UBP073 372<br />
To Suit <strong>Vol</strong>kswagen Amarok 2023+ UBP110 378<br />
REFER TO VEHICLE LISTING PAGES FOR SPECIFIC MODEL COMPATIBILITY / SUITABILITY<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
467
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Atlas Racks and Crossbar Kits<br />
ATLAS RACK AND CROSSBAR KITS<br />
* Platform / Crossbar load rating only.<br />
Refer to vehicle manufacturer for specific roof load carrying capacity<br />
Vehicle Make (Suits) Type / Description Part Number Load Rating* Weight Dimensions (mm)<br />
ATLAS PLATFORM RACK KITS TO SUIT KG KG L W H<br />
Ford Ranger 2011+ Platform A IFR054PAK 100 28 1530 1240 50<br />
Ford Ranger Raptor 2018+ Platform A IFR054PAK 100 28 1530 1240 50<br />
Ford Ranger Wildtrack only 2022+ Platform A IFR110WTPAK 100 27 1530 1240 50<br />
Ford Ranger Wildtrack only 2011-2022 Platform A IFR054WTPAK 100 27 1530 1240 50<br />
Ford Everest Ambiente, Trend and Sport only 2022+ Platform E IFR115TSPEK 100 37 1530 1380 50<br />
Ford Everest Platinum only 2022+ Platform E IFR115PLPEK 100 37 1530 1380 50<br />
Isuzu D-Max DC only 2020+ Platform A IFR074PAK 100 27 1530 1240 50<br />
Isuzu MU-X 2021+ Platform E IFR095PEK 150 37 1530 1380 50<br />
Mazda BT50 2020+ Platform A IFR074PAK 100 27 1530 1240 50<br />
Mazda BT50 2012 to 2020 Platform A IFR054PAK 100 28 1530 1240 50<br />
Mitsubishi Pajero Sport 2019+ Platform E IFR079PEK 100 37 1530 1380 50<br />
Mitsubishi Triton MQ / MR Platform A IFR067PAK 100 27 1530 1240 50<br />
Nissan Navara NP300 2015+ Platform B IFR048PBK 100 29 1530 1380 50<br />
Nissan Patrol Y62 Platform N IFR062LPNK 100 39 2130 1380 50<br />
Ram 1500 DT Crew Cab 2018+ Platform S IFR085PSK 100 28 1390 1485 50<br />
Ram 1500 DS Crew Cab 2014+ Platform S IFR075PSK 100 28 1390 1485 50<br />
Toyota Hilux Rogue Wide Body 2023+ Platform A IFR065PAK 100 28 1530 1240 50<br />
Toyota Hilux 2015+ Platform A IFR065PAK 100 28 1530 1240 50<br />
Toyota Hilux 2005 to 2015 Platform A IFR033PAK 150 28 1530 1240 50<br />
Toyota Landcruiser 200 Series Platform A IFR056PAK 150 27 1530 1240 50<br />
Toyota Landcruiser 200 Series Platform E IFR056PEK 150 39 2130 1380 50<br />
Toyota Landcruiser 300 Series Platform A IFR090PAK 100 27 1530 1240 50<br />
Toyota Landcruiser 300 Series Platform E IFR090PEK 100 39 2130 1380 50<br />
Toyota Landcruiser 79 Series D/Cab Platform S IFR019PSK 100 28 1390 1485 50<br />
Toyota Prado 150 2009+ Platform E IFR047PEK 120 37 1530 1380 50<br />
<strong>Vol</strong>kswagen Amarok Core, Life and Style only 2023+ Platform A IFR054PAK 100 28 1530 1240 50<br />
<strong>Vol</strong>kswagen Amarok Panamericana and Aventra 2023+ Platform A IFR110WTPAK 100 27 1530 1240 50<br />
To Suit Pinnacle 2 Canopies Platform K IFRP2PKK 100 28 1390 1240 50<br />
To Suit Slideaway Hard Tonneau Cover Platform A IFRSLDAWAYPSK 100 30 1530 1240 50<br />
To Suit Slideaway Hard Tonneau Cover Platform G IFRSLDAWAYPGK 100 30 1390 1240 50<br />
ATLAS CROSSBAR KITS TO SUIT Load Rating* KG KG L W H<br />
Ford Ranger Next-Gen only 2022+ Crossbars (2) with Fit Kit IFR054C2K 100 7 - 1250 -<br />
Ford Ranger Next-Gen Wildtrack only 2022+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Ford Ranger Raptor 2018+ Crossbars (2) with Fit Kit IFR054C2K 100 7 - 1250 -<br />
Ford Ranger / Wildtrack 2011-2022 Crossbars (2) with Fit Kit IFR054C2K 100 7 - 1250 -<br />
Great Wall Cannon 2020+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Isuzu D-Max DC X-Terrain only 2019+ Crossbars (2) with Fit Kit IFR074C2K 100 7 - 1250 -<br />
Jeep Gladiator JT DC 2019+ Crossbars (2) with Fit Kit IFR077C2K 100 8 - 1650 -<br />
LDV T60 2017+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Mazda BT50 2020+ Crossbars (2) with Fit Kit IFR074C2K 100 7 - 1250 -<br />
Mazda BT50 2012 to 2020 Crossbars (2) with Fit Kit IFR054C2K 100 7 - 1250 -<br />
Mitsubishi Triton MQ / MR Crossbars (2) with Fit Kit IFR067C2K 100 7 - 1250 -<br />
Nissan Navara NP300 DC 2015+ Crossbars (2) with Fit Kit IFR048C2K 100 7 - 1250 -<br />
Nissan Navara NP300 ST-X and Pro-4X DC 2021+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Subaru Forester 2019+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Subaru Outback 2015+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Subaru XV Crosstrek 2018+ Crossbars (2) with Fit Kit IFRK091 75 7 - 1250 -<br />
Subaru XV Crosstrek 2018+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
Suzuki Jimny GJ Crossbars (2) with Fit Kit IFR070C2K 100 7 - 1250 -<br />
Toyota Rav4 2019+ Crossbars (2) with Fit Kit IFRK091 75 7 - 1250 -<br />
Toyota Hilux Rogue Wide Body 2023+ Crossbars (2) with Fit Kit IFR065C2K 100 7 - 1250 -<br />
Toyota Hilux 2015+ Crossbars (2) with Fit Kit IFR065C2K 100 7 - 1250 -<br />
Toyota Hilux 2005 to 2015 Crossbars (2) with Fit Kit IFR065C2K 100 7 - 1250 -<br />
Toyota Landcruiser 200 Series Crossbars (3) with Fit Kit IFR056C3K 150 8 - 1375 -<br />
Toyota Landcruiser 79 Series D/Cab Crossbars (2) with Fit Kit IFR019C2K 100 8 - 1650 -<br />
Toyota Prado 150 2009+ Crossbars (3) with Fit Kit IFR047C3K 150 8 - 1375 -<br />
<strong>Vol</strong>kswagen Amarok Core, Life and Style only 2023+ Crossbars (2) with Fit Kit IFR054C2K 100 7 - 1250 -<br />
<strong>Vol</strong>kswagen Amarok Panamericana and Aventra 2023+ Crossbars (2) with Fit Kit IFRK094 75 8 - 1375 -<br />
To Suit Pinnacle 2 Canopies Crossbars (2) with Fit Kit IFRP2C125K 100 7 - 1250 -<br />
To Suit Slideaway Hard Tonneau Cover Crossbars (2) with Fit Kit IFRSLDAWAYC2K 100 8 - 1650 -<br />
468 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Racks, Mount Kits, Rail Extrusions and Canopies<br />
ROOF RACKS<br />
Description Type Part Number Weight Kg Dimensions (mm) L x W x H<br />
Steel Roof Rack Cage Style IRRCAGE14 37 1400 1250 150<br />
Steel Roof Rack Cage Style IRRCAGE18 46 1800 1250 150<br />
Steel Roof Rack Cage Style IRRCAGE22 52 2200 1250 150<br />
Steel Roof Rack Rooftop Tent Compatible IRRTENT18 37 1800 1250 150<br />
Steel Roof Rack Rooftop Tent Compatible IRRTENT22 45 2200 1250 150<br />
Steel Roof Rack - Open End Trade Style IRRTRADE18 42 1800 1250 150<br />
Steel Roof Rack - Open End Trade Style IRRTRADE22 49 2200 1250 150<br />
Alloy Roof Rack - Mesh Floor Cage Style IRRCAGE14-ALLOY 17 1400 1250 150<br />
Alloy Roof Rack - Mesh Floor Cage Style IRRCAGE18-ALLOY 22 1800 1250 150<br />
Alloy Roof Rack - Mesh Floor Cage Style IRRCAGE22-ALLOY 27 2200 1250 150<br />
Alloy Roof Rack - Mesh Floor, Open End Trade Style IRROPEN14-ALLOY 16 1400 1250 150<br />
Alloy Roof Rack - Mesh Floor, Open End Trade Style IRRTRADE18-ALLOY 20 1800 1250 150<br />
Alloy Roof Rack - Mesh Floor, Open End Trade Style IRRTRADE22-ALLOY 25 2200 1250 150<br />
Alloy Roof Rack - Mesh Floor Flat Style IRRTFLAT18-ALLOY 18 1800 1250 30<br />
MOUNT KITS<br />
Description Feet Part Number Height<br />
100mm Gutter Mount 8 Feet IRRFEET100 100<br />
125mm Gutter Mount 8 Feet IRRFEET125 125<br />
150mm Gutter Mount 8 Feet IRRFEET150 150<br />
210mm Gutter Mount 8 Feet IRRFEET210 210<br />
To Suit Landcruiser 100 / 105 Series Roof Mount 8 Feet IRRFEETLC100 Adjustable<br />
To Suit Landcruiser 200 Series Roof Mount 8 Feet IRRFEETLC200 Adjustable<br />
To Suit GM / Holden Colorado 7 / Trailblazer 6 Feet IRRFEET001 Fixed<br />
To Suit Toyota Prado 150 2 Feet IRRFEETPRADO150 Fixed<br />
To Suit Isuzu MU-X - Replaces Roof Rails 4 Feet IRRFEETMUX Fixed<br />
ABS Canopies 010 / 011 / 012 / 013 / 014 / 015 / 019 / 020 4 (2 pieces) IRRFEETABS14 45<br />
CANOPIES - GENERIC LISTINGS<br />
REFER TO VEHICLE LISTING PAGES<br />
FOR SPECIFIC MODEL COMPATIBILITY / SUITABILITY<br />
Vehicle Make Model and Specifics Canopy Model/Type Part Number Weight Page<br />
To Suit Fiat Fullback 2016+ Thermo Plas / ABS Plastic CANOPY014 80kg 47<br />
To Suit Fiat Fullback 2016+ Pinnacle 1 / Fibreglass CANFIBRE050* 100kg 47<br />
To Suit Fiat Fullback 2016+ Pinnacle 2 / Fibreglass ICANOPY050* 100kg 47<br />
To Suit Ford Ranger Next-Gen 2022+ Pinnacle 2 / Fibreglass ICANOPY110* 100kg 58<br />
To Suit Ford Ranger PX 2011-2015* / PX II 2015-7/2018 / PX III 8/2018+ / Raptor 9/2018+ ABS Plastic CANOPY010* 80kg 62, 66, 70<br />
To Suit Ford Ranger PX 2011-2015* / PX II 2015-7/2018 / PX III 8/2018+ / Raptor 9/2018+ Pinnacle 1 / Fibreglass CANFIBRE054* 100kg 57, 62, 66, 70<br />
To Suit Ford Ranger PX 2011-2015* / PX II 2015-7/2018 / PX III 8/2018+ / Raptor 9/2018+ Pinnacle 2 / Fibreglass ICANOPY054* 100kg 57, 62, 66, 70<br />
To Suit Isuzu D-Max 6/2012 to 7/2019 ABS Plastic CANOPY020* 80kg 111, 114<br />
To Suit Isuzu D-Max 8/2019+ Pinnacle 2 / Fibreglass ICANOPY074* 100kg 108<br />
To Suit Mazda BT50 6/2020+ Pinnacle 2 / Fibreglass ICANOPY074* 100kg 159<br />
To Suit Mazda BT50 2012 to 5/2020 ABS Plastic CANOPY010* 80kg 163<br />
To Suit Mazda BT50 2012 to 5/2020 Pinnacle 1 / Fibreglass CANFIBRE054* 100kg 163<br />
To Suit Mazda BT50 2012 to 5/2020 Pinnacle 2 / Fibreglass ICANOPY054* 100kg 163<br />
To Suit Mitsubishi Triton MR 11/2018+ / MQ 2015-10/2018 ABS Plastic CANOPY014 80kg 191, 195<br />
To Suit Mitsubishi Triton MR 11/2018+ / MQ 2015-10/2018 Pinnacle 1 / Fibreglass CANFIBRE050* 100kg 191, 195<br />
To Suit Mitsubishi Triton MR 11/2018+ / MQ 2015-10/2018 Pinnacle 2 / Fibreglass ICANOPY050* 100kg 191, 195<br />
To Suit Nissan Navara 2021+ Pinnacle 2 / Fibreglass ICANOPY082* 100kg 208<br />
To Suit Nissan Navara NP300 2015 to 2020 ABS Plastic CANOPY013* 80kg 213<br />
To Suit Nissan Navara NP300 2015 to 2020 Pinnacle 1 / Fibreglass CANFIBRE048* 100kg 213<br />
To Suit Renault Alaskan 2017+ ABS Plastic CANOPY013* 80kg 254<br />
To Suit Renault Alaskan 2017+ Pinnacle 1 / Fibreglass CANFIBRE048* 100kg 254<br />
To Suit Toyota Hilux 2015+ ABS Plastic CANOPY017-SW 80kg 301<br />
To Suit Toyota Hilux 2015+ Pinnacle 1 / Fibreglass CANFIBRE051* 100kg 297, 301<br />
To Suit Toyota Hilux 2015+ Pinnacle 2 / Fibreglass ICANOPY051* 100kg 297, 301<br />
To Suit <strong>Vol</strong>kswagen Amarok 2023+ Pinnacle 2 / Fibreglass ICANOPY112* 100kg 378<br />
To Suit <strong>Vol</strong>kswagen Amarok 2011 to 2022 ABS Plastic CANOPY021 80kg 380, 382<br />
To Suit <strong>Vol</strong>kswagen Amarok 2011 to 2022 Pinnacle 2 / Fibreglass ICANOPY060* 100kg 380, 382<br />
* Colour coded options available<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
469
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
LED Driving Lights<br />
LED DRIVING LIGHTS<br />
IDL0701C Op.<strong>Vol</strong>t: 10-32V DC<br />
178mm (7”) 98mm (3.9”)<br />
IDL0701S Op.<strong>Vol</strong>t: 10-32V DC<br />
178mm (7”) 98mm (3.9”)<br />
IDL0901C Op.<strong>Vol</strong>t: 10-32V DC<br />
227mm (9”) 100mm (4”)<br />
IDL0901S Op.<strong>Vol</strong>t: 10-32V DC<br />
227mm (9”) 100mm (4”)<br />
206mm (8.1”)<br />
206mm (8.1”)<br />
245mm (9.6”)<br />
245mm (9.6”)<br />
COMBO BEAM PATTERN<br />
SPOT BEAM PATTERN<br />
COMBO BEAM PATTERN<br />
236lx 136lx 1lx 0.25lx 178lx 93lx 93lx 1lx 0.25lx 170lx 115lx 0.25lx 1lx 0.25lx<br />
236lx 136lx 1lx<br />
170lx 115lx 1lx 0.25lx<br />
243lx 175lx 175lx 1lx 0.25lx<br />
0.25lx<br />
80m<br />
80m<br />
60m<br />
80m<br />
175lx<br />
80m<br />
243lx 1lx 0.25lx<br />
80m<br />
40m<br />
30m<br />
40m<br />
40m<br />
80m<br />
40m<br />
-40m<br />
-30m<br />
40m<br />
-40m<br />
-80m<br />
-60m<br />
-80m<br />
-40m<br />
40m<br />
-40m<br />
20m 50m 550m 550m 750m 750m<br />
20m 50m 700m 700m 950m 950m<br />
-40m<br />
50m<br />
-80m<br />
-40m<br />
950m 20m 550m 750m<br />
-80m<br />
Combo Beam<br />
Spot Beam<br />
-80m<br />
-80m<br />
Combo 50m Beam 100m<br />
50m 100m<br />
1250m 1250m 1600m<br />
1600m<br />
1050m 1200m 50m 100m 1250m<br />
50m 100m<br />
1050m 1200m 1200m<br />
Combo Beam<br />
Combo Beam<br />
SPOT BEAM PATTERN<br />
Spot Beam<br />
Spot Beam<br />
ILED5X7 Op. <strong>Vol</strong>t: 12-24V DC<br />
178mm<br />
91mm<br />
ILEDBLAST2C Op. <strong>Vol</strong>t: 12-24V DC<br />
187mm<br />
78mm<br />
ILEDBLAST2S Op. <strong>Vol</strong>t: 12-24V DC<br />
187mm<br />
78mm<br />
ø178mm<br />
ø178mm<br />
127mm<br />
142mm<br />
193mm<br />
ILEDBLAST2S<br />
193mm<br />
60m<br />
30m<br />
-30m<br />
-60m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
ILEDBLAST2C<br />
178lx 93lx 1lx 0.25lx<br />
236lx 136lx 1lx 0.25lx<br />
ILED5X7<br />
BEAM PATTERN<br />
COMBO BEAM PATTERN<br />
80m<br />
40m<br />
-40m<br />
4200lx 1lx 0.25lx<br />
2950lx 1lx 0.25lx<br />
-80m<br />
30m<br />
750m30m<br />
20m 50m 700m 950m 20m 50m 550m<br />
Spot Beam<br />
20m<br />
Combo Beam<br />
20m<br />
10m<br />
10m<br />
0<br />
0<br />
-10m<br />
-10m<br />
-20m<br />
-20m<br />
-30m<br />
-30m<br />
10m 648m 1296m<br />
10m 506m 1086m<br />
SPOT BEAM PATTERN<br />
2560lx 1lx 0.25lx<br />
10m 543m 1086m<br />
Combo Beam<br />
ILED7M Op. <strong>Vol</strong>t: 12-24V DC<br />
ILED9M Op. <strong>Vol</strong>t: 12-24V DC<br />
ILED7C Op. <strong>Vol</strong>t: 12-24V DC<br />
ILED9C Op. <strong>Vol</strong>t: 12-24V DC<br />
187mm<br />
78mm<br />
238mm<br />
92mm<br />
ø178mm<br />
ø229mm<br />
ø178mm<br />
ø229mm<br />
193mm<br />
249mm<br />
199mm<br />
226mm<br />
250mm<br />
277mm<br />
HML-5948P<br />
HML-62102P<br />
ILED7C<br />
ILED9C<br />
103mm<br />
BEAM PATTERN<br />
2400lx 1lx 0.25lx<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
10m 490m 980m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
BEAM PATTERN<br />
2700lx 1lx 0.25lx<br />
10m 520m 1039m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
BEAM PATTERN<br />
860lx 1lx 0.25lx<br />
860lx 1lx 0.25lx<br />
10m 293m 587m<br />
10m 293m 587m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
BEAM PATTERN<br />
1400lx 1lx 0.25lx<br />
1400lx 1lx 0.25lx<br />
10m 374m 748m<br />
10m 374m 748m<br />
IMEGATOM Op.<strong>Vol</strong>t: 9-30V DC<br />
ø178mm<br />
ø178mm<br />
214 mm<br />
230mm<br />
214 mm<br />
230mm<br />
102mm<br />
102mm<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
ILEDOMG<br />
COMBO LIGHT BEAM PATTERN<br />
4300lx 1lx 0.25lx<br />
10m 656m 1311m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
ILEDOMG<br />
LIGHTBAR BEAM PATTERN<br />
4300lx 1lx 0.25lx<br />
10m 656m 1311m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
ILEDOMG<br />
DRIVING LIGHT BEAM PATTERN<br />
4300lx 1lx 0.25lx<br />
10m 656m 1311m<br />
321mm<br />
321mm<br />
66mm<br />
66mm<br />
Combo Beam<br />
Driving Light Bar Beam<br />
Spot Beam<br />
102mm<br />
66mm<br />
470 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
83mm<br />
64.2mm<br />
64.2mm<br />
75mm<br />
75mm<br />
15mm<br />
62mm<br />
44mm<br />
39mm<br />
50mm<br />
11mm<br />
11mm<br />
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
LED Work Lights and Upgrades<br />
LED WORK AND UNIVERSAL LIGHTS<br />
4110/ILEDWL10<br />
ILEDWL10 / ILEDWL10FA<br />
260lx 1lx 0.25lx<br />
30m 93mm<br />
20m<br />
10m<br />
0m<br />
46mm<br />
-10m<br />
-20m<br />
-30m<br />
10m 161m 322m<br />
BEAM PATTERN<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
45mm<br />
260lx 1lx 0.25lx<br />
10m 161m 322m<br />
9320 Spot SPOT/ILED20B<br />
Beam<br />
ILED20B SERIES<br />
30m<br />
9320<br />
20m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
69.9mm<br />
635lx 1lx 0.25lx<br />
59.6mm<br />
10m 252m 504m<br />
BEAM PATTERN<br />
635lx 1lx 0.25lx<br />
10m 252m 504m<br />
ILEDUNI3<br />
89mm<br />
97mm<br />
ILEDUNI3<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
78mm<br />
73mm<br />
BEAM PATTERN<br />
88lx 1lx 0.25lx<br />
10m 94m 188m<br />
ILED20BF SERIES<br />
30m 9320<br />
20m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
69.9mm<br />
9320 FC/ILED20BF<br />
35lx 1lx 0.25lx<br />
59.6mm<br />
10m 59m 118m<br />
BEAM PATTERN<br />
35lx 1lx 0.25lx<br />
10m 59m 118m<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
ILEDUNI5<br />
120mm<br />
136mm<br />
ILEDUNI5<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
109mm<br />
90mm<br />
BEAM PATTERN<br />
4300lx 1lx 0.25lx<br />
10m 341m 683m<br />
ILED80B SERIES<br />
30m 9540<br />
20m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
81mm<br />
9540 SPOT/ILED80B<br />
736lx 1lx 0.25lx<br />
78mm<br />
10m 271m 543m<br />
BEAM PATTERN<br />
736lx 1lx 0.25lx<br />
10m 271m 543m<br />
IRL120B<br />
30m<br />
4215<br />
20m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
77mm<br />
55mm<br />
1lx<br />
4209/IRL120B<br />
0.9lx<br />
9m<br />
10m<br />
BEAM PATTERN<br />
1lx 0.9lx<br />
9m<br />
ILED80BF SERIES<br />
30m 9540<br />
20m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
81mm<br />
10m<br />
Flood Beam<br />
9540 FC/ILED80BF<br />
28lx 1lx 0.25lx<br />
78mm<br />
10m 53m 106m<br />
BEAM PATTERN<br />
28lx 1lx 0.25lx<br />
10m 53m 106m<br />
Spot Beam<br />
IFL0201 SERIES<br />
IFL0201<br />
Flood Beam<br />
Spot Beam<br />
Flood Beam<br />
55mm<br />
78mm<br />
IFL0201x<br />
BEAM PATTERN<br />
406lx 180lx 1lx<br />
40m<br />
20m<br />
0<br />
-20m<br />
-40m<br />
10m 30m<br />
80m<br />
ILEDCOSMO<br />
ILEDSB<br />
179mm<br />
63mm<br />
165mm<br />
80mm<br />
HML-7120<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
112mm<br />
BEAM PATTERN<br />
650lx 1lx 0.25lx<br />
10m 255m 510m<br />
161mm<br />
138mm<br />
72mm<br />
99mm<br />
HML-5618M<br />
BEAM PATTERN<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
10lx 1lx 0.25lx<br />
10m 32m 63m<br />
BULL BAR UPGRADE LED LIGHTS<br />
100mm<br />
BBPART031<br />
68mm<br />
BBPART002<br />
230mm<br />
200mm<br />
230mm<br />
100mm<br />
200mm<br />
57mm 57mm<br />
100mm<br />
22mm<br />
68mm<br />
Operating <strong>Vol</strong>tage: 9-32V DC<br />
22mm<br />
Operating <strong>Vol</strong>tage: 12V DC<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
471
40mm<br />
40mm<br />
40mm<br />
40mm<br />
40mm<br />
40mm<br />
70mm<br />
70mm<br />
70mm<br />
40mm<br />
52mm<br />
52mm<br />
52mm<br />
70mm<br />
70mm<br />
70mm<br />
52mm<br />
70mm<br />
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
LED Lightbars<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
ILBSR005B<br />
(B1818 FC)<br />
177mm<br />
208mm<br />
229mm<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
ILBSR003B<br />
(B1863)<br />
522mm<br />
553mm<br />
574mm<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
ILBSR2340<br />
591mm<br />
622mm<br />
643mm<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
ILBSR002B<br />
(B1899)<br />
798mm<br />
829mm<br />
850mm<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
ILBSR001B<br />
(B18126)<br />
1005mm<br />
1036mm<br />
1057mm<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
ILBSR000B<br />
(B18162)<br />
1281mm<br />
1312mm<br />
1333mm<br />
BRIGHT SABRE MULTI-FUNCTION - DUAL ROW<br />
ILBDR002BM<br />
(B15180AW)<br />
815mm<br />
851mm<br />
875mm<br />
BRIGHT SABRE MULTI-FUNCTION - DUAL ROW<br />
ILBDR001BM<br />
(B15240AW)<br />
1076mm<br />
1112mm<br />
1136mm<br />
BRIGHT SABRE-X - SINGLE ROW SLIM<br />
30m<br />
20m<br />
B18128 FC/ILBSR005B<br />
ILBSR005B (B1818 FC)<br />
25lx 1lx 0.25lx<br />
177mm<br />
10m<br />
SINGLE ROW - SLIM<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
208mm<br />
B1863/ILBSR003B<br />
229mm<br />
BEAM PATTERN<br />
10m 50m 100m<br />
54mm 25lx 1lx 0.25lx<br />
30m<br />
20m 4065lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 50m 100m<br />
-30m<br />
10m 638m 1275m<br />
BEAM Flood ILBSR2340 PATTERN Beam<br />
54mm4065lx 1lx 0.25lx<br />
30m<br />
20m 4600lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
10m -10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 638m 1275m<br />
-30m<br />
10m 678m 1356m<br />
B1899/ILBSR002B<br />
BEAM Combo PATTERN Beam<br />
54mm4600lx 1lx 0.25lx<br />
30m<br />
20m 6150lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 678m 1356m<br />
-30m<br />
10m 784m 1568m<br />
B18126/ILBSR001B<br />
BEAM Combo PATTERN Beam<br />
54mm6150lx 1lx 0.25lx<br />
30m<br />
20m 6957lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 784m 1568m<br />
-30m<br />
10m 834m 1668m<br />
B18162/ILBSR000B<br />
BEAM Combo PATTERN Beam<br />
54mm6957lx 1lx 0.25lx<br />
30m<br />
20m 8402lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 834m 1668m<br />
-30m<br />
10m 917m 1833m<br />
BEAM Combo PATTERN Beam<br />
54mm8402lx 1lx 0.25lx<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
BRIGHT SABRE - DOUBLE<br />
10m<br />
ROW<br />
917m 1833m<br />
ILBDR003B (B15120)<br />
30m<br />
20m<br />
B15180AW/ILBDR002BM<br />
Combo Beam<br />
10m<br />
DUAL ROW - 0m MULTI FUNCTION<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
1997lx 1lx 0.25lx<br />
561mm<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
10m 447m 894m<br />
B15240AW/ILBDR001BM<br />
BEAM PATTERN<br />
601mm<br />
625mm<br />
67mm 1997lx 1lx 0.25lx<br />
2116lx 1lx 0.25lx<br />
10m 447m 894m<br />
10m 460m 920m<br />
BEAM Combo PATTERN Beam<br />
67mm 2116lx 1lx 0.25lx<br />
10m 460m 920m<br />
Combo Beam<br />
54mm<br />
67mm<br />
BRIGHT SABRE - SINGLE ROW WIDE<br />
ILBSR003BW<br />
(B1445)<br />
524mm<br />
555mm<br />
576mm<br />
BRIGHT SABRE - SINGLE ROW WIDE<br />
ILBSR002BW<br />
(B1472)<br />
812mm<br />
843mm<br />
864mm<br />
BRIGHT SABRE - SINGLE ROW WIDE<br />
ILBSR001BW<br />
(B1490)<br />
1004mm<br />
1035mm<br />
1056mm<br />
BRIGHT SABRE - DOUBLE ROW<br />
ILBDR003B<br />
(B15120)<br />
561mm<br />
601mm<br />
625mm<br />
BRIGHT SABRE - DOUBLE ROW<br />
ILBDR002B<br />
(B15180)<br />
815mm<br />
857mm<br />
880mm<br />
BRIGHT SABRE - DOUBLE ROW<br />
ILBDR001B<br />
(B15240)<br />
1076mm<br />
1112mm<br />
1136mm<br />
BRIGHT SABRE - SINGLE ROW WIDE<br />
30m<br />
20m<br />
B1445/ILBSR003BW<br />
ILBSR003BW (B1445)<br />
2560lx 1lx 0.25lx<br />
524mm<br />
10m<br />
SINGLE ROW - WIDE<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
555mm<br />
B1472/ILBSR002BW<br />
BEAM 576mm PATTERN<br />
10m 505m 1012m<br />
67mm2560lx 1lx 0.25lx<br />
30m<br />
20m 4950lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 505m 1012m<br />
-30m<br />
10m 704m 1407m<br />
B1490/ILBSR001BW<br />
BEAM Combo PATTERN Beam<br />
67mm4950lx 1lx 0.25lx<br />
30m<br />
20m 5164lx 1lx 0.25lx<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m 10m 704m 1407m<br />
-30m<br />
10m 719m 1437m<br />
BEAM Combo PATTERN Beam<br />
67mm5164lx 1lx 0.25lx<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
10m 719m 1437m<br />
BRIGHT SABRE - DOUBLE ROW<br />
ILBDR003B (B15120)<br />
30m<br />
20m<br />
10m<br />
DUAL 0m ROW<br />
-10m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
30m 10m<br />
20m0<br />
-10m 10m<br />
-20m 0m<br />
-10m -30m<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
Combo B15120/ILBDR003B<br />
Beam<br />
646lx 1lx 0.25lx<br />
561mm<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
10m 804m 1608m<br />
B15180/ILBDR002B<br />
BEAM PATTERN<br />
601mm<br />
625mm<br />
67mm 646lx 1lx 0.25lx<br />
8624lx 1lx 0.25lx<br />
10m 804m 1608m<br />
10m 929m 1857m<br />
B15240/ILBDR001B<br />
BEAM Combo PATTERN Beam<br />
67mm 8624lx 1lx 0.25lx<br />
11500lx 1lx 0.25lx<br />
10m 929m 1857m<br />
10m 1072m 2145m<br />
BEAM Combo PATTERN Beam<br />
67mm 11500lx 1lx 0.25lx<br />
10m 1072m 2145m<br />
Combo Beam<br />
67mm<br />
67mm<br />
472 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ILBSR004<br />
ILBSR003<br />
ILBSR002<br />
ILBSR001<br />
ILBSR003C<br />
ILBSR002C<br />
ILBSR001C<br />
ILBSR004 / B745 Operating <strong>Vol</strong>tage: 12-24V DC<br />
ILBSR004<br />
67.2mm<br />
302mm<br />
895lx 1lx 0.25lx<br />
Side 30m Bracket<br />
Bottom Bracket<br />
302mm<br />
20m<br />
10m<br />
0m<br />
-10m<br />
ILBSR004<br />
-20m<br />
-30m<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
30m -20m<br />
20m -30m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
ILBSR003<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
30m -20m<br />
20m -30m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
ILBSR002<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
30m<br />
-30m<br />
20m<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
-30m<br />
ILBSR001<br />
30m<br />
20m<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
LED LIGHT BARS - STRAIGHT<br />
ILBSR004<br />
302mm<br />
523mm<br />
ILBSR003<br />
74.5mm<br />
67.2mm 500mm<br />
10m 299m 598m<br />
BEAM PATTERN<br />
74.5mm<br />
895lx<br />
ILBSR003<br />
1lx 0.25lx 523mm<br />
ILBSR003 / B790<br />
ILBSR004<br />
302mm ILBSR002<br />
745mm<br />
1860lx ILBSR002 1lx 0.25lx<br />
10m 299m 598m<br />
ILBSR003<br />
523mm<br />
ILBSR001<br />
ILBSR001 ILBSR004 965mm<br />
10m<br />
302mm<br />
431m 863m<br />
BEAM PATTERN<br />
1860lx<br />
ILBSR002<br />
1lx 0.25lx<br />
ILBSR002 / B7135<br />
67.2mm<br />
745mm<br />
965mm<br />
ILBSR003C<br />
ILBSR003C 520mm 523mm<br />
67.2mm<br />
520mm<br />
497mm 74.5mm<br />
2460lx<br />
74.5mm<br />
ILBSR001 1lx 0.25lx 74.5mm<br />
47.5mm<br />
ILBSR004<br />
965mm<br />
10m<br />
302mm<br />
431m<br />
47.5mm 67.2mm<br />
863m<br />
ILBSR002C<br />
74.5mm<br />
740mm 745mm<br />
ILBSR002C<br />
ILBSR003C<br />
740mm<br />
717mm<br />
ILBSR003<br />
520mm<br />
10m 496m 992m 523mm<br />
74.5mm 67.2mm<br />
74.5mm<br />
BEAM PATTERN<br />
ILBSR001C<br />
47.5mm 74.5mm<br />
958mm 47.5mm<br />
2460lx 1lx 0.25lx<br />
965mm<br />
ILBSR001 / B7180 ILBSR001C<br />
ILBSR002C<br />
ILBSR002<br />
3446lx ILBSR003C 1lx 0.25lx<br />
520mm<br />
10m 496m 992m<br />
ILBSR001C<br />
ILBSR001<br />
ILBSR002C<br />
10m 587m 1174m<br />
BEAM PATTERN<br />
3446lx<br />
ILBSR003C<br />
1lx 0.25lx 520mm<br />
ILBSR001C<br />
ILBSR002C<br />
74.5mm<br />
958mm<br />
10m 587m 1174m<br />
67.2mm<br />
67.2mm<br />
74.5mm<br />
74.5mm<br />
745mm<br />
740mm<br />
745mm<br />
740mm<br />
740mm<br />
958mm<br />
965mm<br />
958mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
ILBSR003<br />
67.2mm<br />
85.7mm<br />
ACCESSORIES 500mm - TECHNICAL SPECIFICATIONS<br />
LED Lightbars ILBSR002 and Light Wire Looms<br />
745mm<br />
67.2mm<br />
85.7mm<br />
ILBSR002<br />
ILBSR001<br />
67.2mm<br />
74.5mm<br />
74.5mm<br />
47.5mm<br />
935mm 67.2mm<br />
74.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
73.8mm<br />
45.6mm<br />
47.5mm<br />
523mm<br />
67.2mm<br />
-20m<br />
30m<br />
-30m<br />
20m<br />
74.5mm<br />
10m<br />
0m<br />
-10m<br />
-20m<br />
73.8mm<br />
-30m<br />
45.6mm<br />
67.2mm<br />
74.5mm 30m<br />
74.5mm 20m<br />
47.5mm<br />
10m<br />
0<br />
-10m<br />
-20m<br />
-30m<br />
67.2mm<br />
74.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
ILBSR003<br />
74.5mm<br />
ILBSR004<br />
302mm<br />
ILBSR003<br />
ILBSR001<br />
965mm ILBSR002<br />
LED ILBSR003 LIGHT BARS - CURVED<br />
ILBSR003 / B790<br />
73.8mm<br />
45.6mm<br />
10m 587m 1174m<br />
722mm<br />
74.5mm<br />
74.5mm<br />
745mm 942mm<br />
67.2mm<br />
72.6mm<br />
74.5mm<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
74.5mm<br />
ILBSR001<br />
85.7mm ILBSR003C<br />
ILBSR004<br />
965mm<br />
ILBSR003C<br />
302mm<br />
67.2mm<br />
520mm<br />
497mm<br />
1860lx 1lx 0.25lx<br />
Side 30m Bracket 74.5mm ILBSR002<br />
74.5mm<br />
Bottom Bracket 73.8mm<br />
72.6mm<br />
745mm<br />
20m<br />
10m<br />
47.5mm<br />
45.6mm<br />
0m<br />
ILBSR003C<br />
ILBSR003<br />
520mm<br />
-10m<br />
523mm<br />
67.2mm<br />
74.5mm<br />
ILBSR002C<br />
85.7mm<br />
ILBSR003C<br />
-20m ILBSR002C<br />
740mm -30m<br />
ILBSR001<br />
74.5mm<br />
717mm<br />
47.5mm<br />
965mm<br />
10m 431m 863m<br />
74.5mm<br />
72.6mm<br />
BEAM PATTERN<br />
ILBSR002C<br />
67.2mm<br />
1860lx ILBSR002 1lx 0.25lx 47.5mm<br />
30m<br />
740mm<br />
745mm<br />
74.5mm<br />
20m<br />
10m ILBSR002<br />
ILBSR003C/ B7135<br />
ILBSR001C<br />
67.2mm<br />
85.7mm 0 ILBSR001C<br />
520mm<br />
722mm<br />
958mm<br />
935mm<br />
-10m<br />
74.5mm<br />
-20m<br />
2460lx ILBSR001C 1lx 0.25lx<br />
74.5mm<br />
74.5mm 67.2mm<br />
30m<br />
72.6mm ILBSR001<br />
958mm 47.5mm<br />
20m -30m<br />
965mm<br />
10m 431m 863m<br />
47.5mm<br />
74.5mm<br />
10m<br />
67.2mm<br />
0m<br />
ILBSR002C<br />
740mm<br />
-10m<br />
74.5mm<br />
67.2mm<br />
ILBSR002C<br />
-20m<br />
85.7mm<br />
942mm<br />
67.2mm -30m<br />
ILBSR003C<br />
10m 496m 992m 520mm<br />
74.5mm 74.5mm BEAM PATTERN72.6mm<br />
74.5mm<br />
ILBSR001C<br />
67.2mm<br />
2460lx 1lx 0.25lx<br />
958mm<br />
30m<br />
47.5mm<br />
74.5mm<br />
20m<br />
10m ILBSR001 / B7180<br />
ILBSR002C<br />
0<br />
740mm<br />
-10m<br />
ILBSR001C<br />
ILBSR004<br />
302mm<br />
523mm<br />
523mm<br />
3446lx 1lx 0.25lx<br />
10m 496m 992m<br />
ILBSR001C<br />
10m 587m 1174m<br />
BEAM PATTERN<br />
3446lx 1lx 0.25lx<br />
67.2mm<br />
67.2mm<br />
74.5mm<br />
958mm<br />
67.2mm<br />
67.2mm<br />
74.5mm<br />
67.2mm<br />
67.2mm<br />
74.5mm<br />
73.8mm<br />
45.6mm<br />
67.2mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
72.6mm<br />
67.2mm<br />
67.2mm<br />
74.5mm<br />
73<br />
67.2mm<br />
74.5mm 4<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
47.5mm<br />
74.5mm<br />
ILBSR001C<br />
958mm<br />
LED LIGHT BARS - MODULAR<br />
Operating <strong>Vol</strong>tage: 12-24V DC<br />
74.5mm<br />
47.5mm<br />
ILED180S (SPOT)<br />
ILED180F (FLOOD)<br />
MODULAR COMBINATIONS<br />
180mm<br />
180mm<br />
180mm<br />
180mm<br />
180mm<br />
180mm<br />
180mm<br />
180mm<br />
180mm<br />
76mm<br />
76mm<br />
76mm<br />
76mm<br />
76mm<br />
76mm<br />
76mm<br />
76mm<br />
76mm<br />
IWHL001<br />
30W Spot Beam (7”) Long<br />
Single<br />
180mm<br />
Unit<br />
30W Spot Beam (7”) Long 30W Spot Beam (7”) Long<br />
6180mm<br />
Joined side by side<br />
180mm<br />
IWHL002<br />
30W Spot Beam (7”) Long<br />
180mm<br />
30W Spot Beam (7”) Long<br />
180mm<br />
30W Spot Beam (7”) Long<br />
180mm<br />
30W Spot Beam (7”) Long<br />
IWHL003<br />
180mm<br />
180mm<br />
30W Spot Beam (7”) Long<br />
30W Flood Beam (7”) Long<br />
30W Spot Beam (7”) Long 30W Spot Beam (7”) Long<br />
2 Joined side by side<br />
76mm<br />
76mm<br />
30W Spot Beam (7”) Long 30W Spot Beam (7”) Long<br />
3 Joined side by side<br />
76mm<br />
76mm<br />
30W Spot Beam (7”) Long<br />
76mm<br />
180mm<br />
30W Spot Beam (7”) Long<br />
76mm<br />
76mm<br />
180mm<br />
30W Spot Beam (7”) Long<br />
76mm<br />
76mm<br />
180mm<br />
30W Spot Beam (7”) Long<br />
76mm<br />
76mm<br />
LED DRIVING LIGHTS / LIGHTBAR WIRE LOOMS<br />
2 Stacked<br />
30W Spot Beam (7”) Long<br />
4 Grouped<br />
30W Spot Beam (7”) Long<br />
30W Spot Beam (7”) Long<br />
SINGLE LIGHT LOOM<br />
TWIN LIGHT LOOM<br />
TWIN LIGHT WITH DRL LOOM<br />
TWIN MEGATOM LOOM<br />
IWHL004<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
473
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Fridges and Fridge Troubleshooting<br />
FRIDGE ERROR CODES<br />
EXISTING AND SUPERSEDED FRIDGE RANGE<br />
Code Error Type - Refer to User Manual for further information Possible solution<br />
E1 Battery protection stop auto cut-off (Battery too low or adjust protection setting) Set battery protection to lower setting.<br />
E2 Fan fault (Check clearance around the fan) Check for fan obstructions.<br />
E3<br />
Compressor motor starter error (Low voltage power supply)<br />
Check available voltage of 12/24V power supply, check all connections between<br />
battery and fridge, check condition of plug in lead.<br />
E4<br />
Compressor motor running speed error (Overloaded motor cannot maintain 1850<br />
times / min which is the lowest speed)<br />
Return to place place of purchase for assessment.<br />
E5 Compressor has overheated (Check clearance around the fan) Check for sufficient air flow clearance around fridge.<br />
ER1 Control panel and temperature probe fault Replacement of control panel or temperature probe.<br />
METAL / DRAWER FRIDGE RANGE<br />
Code Error Type - Refer to User Manual for further information Possible solution<br />
ERR01 / E1<br />
Battery cut-out activated<br />
Check source voltage is above the set cut-out level and adjust as required.<br />
Check operation on another power source.<br />
ERR02 / E2 Cooling fan issue Call Ironman 4x4 Customer Service.<br />
ERR03 / E3<br />
ERR04 / E4<br />
ERR05 / E5<br />
Compressor start-up issue<br />
Compressor speed too low<br />
Extreme ambient temperature<br />
Remove fridge from power source and wait 10 mins before reconnecting.<br />
Try connection to an alternate power source.<br />
Potential control system issue, contact Ironman 4x4 Customer Service.<br />
ERR06 / 07 Thermostat failure Call Ironman 4x4 Customer Service.<br />
Remove fridge from power source and wait 10 mins before reconnecting.<br />
Try connection to an alternate power source.<br />
Move unit to a lower ambient temperature area.<br />
Clean and verify all vents are clear to ensure uninterrupted air-flow across<br />
compressor and cooling system.<br />
Move unit to a lower ambient temperature area.<br />
Clean and verify all vents are clear to ensure uninterrupted air-flow across<br />
compressor and cooling system.<br />
Unit will not turn on<br />
• Check power supply ie. Battery voltage<br />
(See Battery Protection table in User Handbook)<br />
• Check all connections between battery and fridge<br />
• Check condition of fuse<br />
• Check that the unit is turned on<br />
Poor refrigeration performance<br />
• Too much food has been placed inside refrigerator<br />
• Temperature of food placed in fridge is too high<br />
• The door is not closed properly<br />
• Door seal is broken<br />
Poor cooling<br />
• Make sure adequate ventilation room is left around unit<br />
(See General Notes in User Handbook)<br />
• Ambient temperature is extremely high<br />
• Temperature is not set correctly<br />
Contents of fridge are freezing<br />
• Temperature setting is too low<br />
Noise<br />
• Unit is not on a flat or level surface<br />
• Check for vibrations in surrounding objects<br />
Sound of water from inside of unit<br />
• This is normal due to flow of refrigerant<br />
FRIDGE FAQ’s<br />
Q. Where can I find a list of the fault codes? A. See User Handbook (or above)<br />
Q. Why is my fridge freezing everything? A. Temperature is set to degrees Fahrenheit, reset to degrees Celsius<br />
Q. My fridge will not turn on? A. Hold On/Off button until the display illuminates<br />
Q. My fridge isn’t staying on? A. Check the battery protection setting, and ensure it is set correctly by referring to your User Handbook<br />
474 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Fridges and Slides<br />
FRIDGE / FREEZERS<br />
40L (10.5GAL) ICECUBE FRIDGE / FREEZER DRAWER - IFRIDGE40LMDR<br />
43L (11GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE43LM<br />
Overall Dimensions<br />
766(L) x 308(H) x 536mm(W) Overall Dimensions<br />
630(L) x 517(H) x 365mm(W)<br />
30.2(L) x 12.1(H) x 21.1”(W)<br />
24.8(L) x 20.4(H) x 14.4”(W)<br />
Weight<br />
22kg (48lb) Weight<br />
25kg (56lb)<br />
Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF) Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF)<br />
Power Draw<br />
4.5Amps Power Draw<br />
4.5Amps<br />
30L (7.9GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE30SP<br />
65L (17GAL) ICECUBE DUAL ZONE FRIDGE / FREEZER - IFRIDGE65LDZM<br />
Overall Dimensions 590(L) (650mm with handle) x 380(H) x 340mm(W) Overall Dimensions<br />
800(L) x 470(H) x 475mm(W)<br />
23.3(L) (25.6”mm with handle) x 15(H) x 13.4”(W)<br />
31.5(L) x 18.5(H) x 18.7”(W)<br />
Weight<br />
18kg (35lb) Weight<br />
29kg (63.9lb)<br />
Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF) Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF)<br />
Power Draw<br />
4.5Amps Power Draw<br />
4.5Amps<br />
40L (10.5GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE40SP<br />
70L (18GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE70LM<br />
Overall Dimensions 590(L) (650mm with handle) x 440(H) x 350mm(W) Overall Dimensions<br />
800(L) x 470(H) x 475mm(W)<br />
23.3(L) (25.6”mm with handle) x 17.4(H) x 13.8”(W)<br />
31.5(L) x 18.5(H) x 18.7”(W)<br />
Weight<br />
20kg (37lb) 843mm (External) Weight<br />
25kg (56lb)<br />
Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF) Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF)<br />
Power Draw<br />
4.5Amps Power Draw<br />
4.5Amps<br />
50L (13GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE50SP<br />
Overall Dimensions 590(L) (650mm with handle) x 520(H) x 350mm(W)<br />
23.3(L) (25.6”mm with handle) x 20.5(H) x 13.8”(W)<br />
Weight<br />
22kg (41lb)<br />
Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF)<br />
Power Draw<br />
4.5Amps<br />
534mm (External)<br />
811mm (Internal)<br />
65L (17GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE65SP (SUPERSEDED MODEL)<br />
Overall Dimensions<br />
820(L) x 495(H) x 490mm(W)<br />
32.3(L) x 19.5(H) x 19.3”(W)<br />
Weight<br />
33kg (66lb)<br />
Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF)<br />
Power Draw<br />
4.5Amps<br />
484mm (Internal)<br />
74L (19.5GAL) ICECUBE FRIDGE / FREEZER - IFRIDGE74SP (SUPERSEDED MODEL)<br />
Overall Dimensions<br />
820(L) x 495(H) x 490mm(W)<br />
32.3(L) x 19.5(H) x 19.3”(W)<br />
Weight<br />
32kg (66lb)<br />
Temperature Range / Regulation +10˚C to -18˚C (+50ºF to -0.4ºF)<br />
Power Draw<br />
4.5Amps<br />
FRIDGE SLIDES<br />
B<br />
A<br />
655mm (External)<br />
420mm (External)<br />
352mm (Internal)<br />
D<br />
592mm (Internal)<br />
IFRIDGESLIDE001 IFRIDGESLIDE002 IFRIDGESLIDE023 IFRIDGESLIDE034 IFRIDGESLIDE045<br />
A 655mm 843mm 902mm 796mm 902mm<br />
C<br />
B 420mm 534mm 576mm 576mm 676mm<br />
C 352mm 811mm 850mm 750mm 850mm<br />
D 592mm 484mm 530mm 430mm 530mm<br />
TILT No No No Yes Yes<br />
WEIGHT 21kg 25kg 21kg 21kg 31kg<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
475
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Locksafe Drawer Systems<br />
LOCKSAFE DRAWER SYSTEMS<br />
900mm Drawer System Weight Length (mm) Height (mm) Width (mm)<br />
TWIN - Cabinet specifications including drawers* 63kg 900 275 970<br />
TWIN - Drawer specifications 840 206 425<br />
SINGLE - Cabinet specifications including drawers* 34kg 900 275 490<br />
SINGLE - Drawer specifications 840 206 425<br />
TOP VIEW<br />
1000mm Drawer System Weight Length (mm) Height Drawers (mm) Width<br />
Width (mm)<br />
TWIN - Cabinet specifications including drawers* 76kg 1000 275 1020<br />
TWIN - Drawer specifications 940 206 450<br />
SINGLE - Cabinet specifications including drawers* 39kg 1000 275 510<br />
SINGLE - Drawer specifications 940 206 425<br />
1300mm Drawer System Weight Length (mm) Height (mm) Width (mm)<br />
TWIN - Cabinet specifications including drawers* 89kg 1300 275 970<br />
TWIN - Drawer specifications 1240 206 425<br />
SINGLE - Cabinet specifications including drawers* 46kg 1300 275 490<br />
SINGLE - Drawer specifications 1240 206 425<br />
* Top of timber to underside of fixing ribs<br />
TOP VIEW<br />
Drawers Width<br />
TOP VIEW<br />
FRONT VIEW<br />
Drawers Width<br />
TWIN DRAWERS<br />
Drawers Length Drawers Height<br />
SINGLE DRAWERS<br />
TOP VIEW<br />
Drawers Width<br />
FRONT VIEW<br />
FRONT VIEW<br />
Drawers Length Drawers Height<br />
Drawers Length Drawers Height<br />
Individual Drawer Width<br />
Drawers Length Drawers Height<br />
Individual Drawer Width<br />
Individual Drawer Width<br />
• All drawers extend 950mm from rear of FRONT unit. For VIEW an absolute overall width of each cabinet, add 26mm to the widths given above. Basic cabinet height is 238mm with 12mm<br />
carpeted ply on top and 20mm high fixing ribs under, giving an overall height of 270mm<br />
REFER TO VEHICLE LISTING PAGES FOR SPECIFIC MODEL COMPATIBILITY / SUITABILITY<br />
476 Individual Drawer Width<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
DeltaWing Awnings<br />
DELTAWING 270 XTR-143 - (WEIGHT 20KG)<br />
DELTAWING 270 XTR-143<br />
DELTAWING 270 XTR-143<br />
2848mm 2848mm 2848mm<br />
2006mm<br />
2006mm<br />
2180mm<br />
2180mm<br />
2848mm 2848mm 2848mm<br />
2180mm<br />
2180mm<br />
DELTAWING 270 XTR-71 - (WEIGHT 20KG)<br />
DELTAWING XTR-71<br />
DELTAWING XTR-71<br />
2180mm 2180mm<br />
2180mm<br />
1870mm<br />
1870mm<br />
2000mm<br />
2000mm<br />
2180mm<br />
2180mm 2180mm 2180mm<br />
2180mm 2180mm<br />
DELTAWING 270 XT-71 - (WEIGHT 18KG)<br />
DELTAWING 270 XT-71<br />
DELTAWING 270 XT-71<br />
2180mm 2180mm<br />
2180mm<br />
1870mm<br />
1870mm<br />
2000mm<br />
2000mm<br />
2180mm<br />
2180mm 2180mm 2180mm<br />
2180mm 2180mm<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
477
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Rooftop Tents<br />
OPEN SOFT ROOFTOP TENT - (WEIGHT 62KG)<br />
OPENVIEW FROM FRONT<br />
VIEW FROM FRONT<br />
Mattress Dimensions: 2300 x 135 x 60mm<br />
1380mm (H)<br />
1380mm (H)<br />
3150mm (L)<br />
1440mm (W)<br />
CLOSED<br />
VIEW FROM PASSENGER SIDE<br />
440mm<br />
Ladder 440mm<br />
3150mm (L)<br />
VIEW FROM PASSENGER SIDE<br />
40mm<br />
VIEW FROM FRONT<br />
VIEW FROM FRONT<br />
Ladder<br />
1440mm (W)<br />
Ladder<br />
Hinge Direction<br />
40mm<br />
320mm<br />
Ladder<br />
Hinge<br />
360mm<br />
Hinge Direction<br />
320mm<br />
Hinge<br />
360mm<br />
1450mm (W)<br />
1240mm (L)<br />
(Doubles in length when tent is open)<br />
1450mm (W)<br />
UBER LITE ROOFTOP TENT - (WEIGHT 47KG)<br />
2450mm<br />
1240mm (L)<br />
(Doubles in length when tent is open)<br />
1270mm<br />
340mm<br />
1220mm<br />
1230mm<br />
478 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Rooftop Tents and Rooftop Tent Awning<br />
SWIFT 1400 HARD TOP ROOFTOP TENT - (WEIGHT 92KG)<br />
SWIFT 1400 HARD TOP ROOFTOP TENT<br />
NOMAD 1300 ABS ROOFTOP TENT<br />
NOMAD 1300 ABS ROOFTOP TENT<br />
194mm<br />
194mm<br />
1400mm<br />
1400mm<br />
1600mm<br />
1050mm<br />
1050mm<br />
2340mm<br />
2340mm<br />
NOMAD 1300 NOMAD ABS ROOFTOP 1300 TENT ABS ROOFTOP TENT - (WEIGHT 69KG)<br />
194mm<br />
1400mm<br />
230mm<br />
230mm<br />
1200mm<br />
1200mm<br />
1050mm<br />
1600mm<br />
1600mm<br />
2340mm<br />
1300 FRONT EXTENSION AWNING KIT<br />
NOMAD 1300 ROOFTOP TENT AWNING - (WEIGHT 3KG)<br />
1150mm<br />
230mm<br />
2580mm<br />
1200mm<br />
2870mm<br />
2980mm<br />
2980mm<br />
1300mm<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
479
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Rooftop Tents<br />
SOFT ROOFTOP TENT ANNEX WITH EXTENSION KIT - (WEIGHT 9KG)<br />
1950mm<br />
1440mm<br />
1980mm<br />
2370mm<br />
2100mm<br />
AWNING ROOM - (WEIGHT 11-12KG)<br />
INSTANT ENSUITE - (WEIGHT 8KG)<br />
1600mm<br />
A<br />
B<br />
C<br />
1000mm<br />
1000mm<br />
IAWNING2MROOM<br />
IAWNING2.5MROOM<br />
A 1950mm 1950mm<br />
B 1880mm 1800mm<br />
C 2000mm 2500mm<br />
480 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Rooftop Tents and Rooftop Tent Awning<br />
LED INSTANT AWNING<br />
A<br />
B<br />
C<br />
IAWNING1.4M IAWNING2M IAWNING2.5M<br />
A 1400mm 2000mm 2500mm<br />
B 2000mm 2000mm 2000xmm<br />
C Variable Variable Variable<br />
2100mm<br />
900mm<br />
700mm<br />
SWAGS<br />
800mm<br />
(top height)<br />
600mm<br />
(bottom height)<br />
SINGLE SWAG - HOOP DESIGN<br />
DOUBLE SWAG - HOOP DESIGN<br />
2100mm<br />
2100mm<br />
2150mm<br />
900mm<br />
700mm<br />
1350mm<br />
1000mm<br />
1000mm<br />
800mm<br />
(top height)<br />
600mm<br />
(bottom height)<br />
800mm<br />
800mm<br />
(height)<br />
(top height)<br />
600mm<br />
(bottom height)<br />
KING SINGLE SWAG - RIDGE POLE 2100mm DESIGN<br />
2150mm<br />
DOUBLE SWAG - RIDGE POLE DESIGN<br />
2150mm<br />
1350mm<br />
1000mm<br />
1000mm<br />
1400mm<br />
800mm<br />
800mm<br />
(height)<br />
(top height)<br />
600mm<br />
(bottom height)<br />
850mm<br />
(height)<br />
2150mm<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
481
ACCESSORIES - TECHNICAL SPECIFICATIONS<br />
Solar Panels<br />
SOLAR PANEL KITS<br />
Part Number Cells per Panel Type Construction Power (Max.) <strong>Vol</strong>tage @ PMAX Current @ PMAX<br />
A ISOLAR120 36<br />
B ISOLAR200 54<br />
C ISOLAR160WR 102<br />
D ISOLAR210WR 136<br />
E ISOLAR110WF 68<br />
F ISOLAR150WF 99<br />
A Grade Monocrystaline Cell<br />
Shingle Assembly<br />
A Grade Monocrystaline Cell<br />
Shingle Assembly<br />
A Grade Monocrystaline Cell<br />
Shingle Assembly<br />
A Grade Monocrystaline Cell<br />
Shingle Assembly<br />
A Grade Monocrystaline Cell<br />
Shingle Assembly<br />
A Grade Monocrystaline Cell<br />
Shingle Assembly<br />
Folding 120W 18.0V 6.66A<br />
Folding 200W 18.0V 11.11A<br />
Rigid 160W 19.04V 8.40A<br />
Rigid 210W 19.04V 11.03A<br />
Semi-Flexible 110W 19.05V 5.77V<br />
Semi-Flexible 150W 19.05A 8.11A<br />
A<br />
357.5mm (14”)<br />
475mm (18.7”)<br />
Width<br />
4mm<br />
(0.15”)<br />
1430mm (4.7’)<br />
B<br />
537.5mm (21.2”)<br />
575mm (22.6”)<br />
Width<br />
4mm<br />
(0.15”)<br />
2150mm (7’)<br />
C<br />
D<br />
E<br />
F<br />
482 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES - PRODUCT INFORMATION<br />
Water Storage Tanks<br />
WATER TANKS<br />
IWT001 - 20L JERRY CAN<br />
IWT002 - 40L JERRY CAN<br />
IWT003 - 40L VERTICAL TANK<br />
50mm Plastic Screw Cap<br />
50mm Plastic Screw Cap<br />
50mm Plastic Screw Cap<br />
465mm<br />
335mm<br />
675mm<br />
Ø81mm<br />
174mm<br />
346mm<br />
Plastic Tap<br />
335mm<br />
460mm<br />
15mm Hosetail<br />
75mm<br />
15mm Hosetail<br />
367mm<br />
1100mm<br />
IWT004 - 50L ROOF RACK TANK<br />
IWT005 - 50L WHEEL ARCH TANK<br />
90mm<br />
120mm<br />
550mm<br />
300mm<br />
120mm<br />
1200mm<br />
50mm Plastic Screw Cap<br />
120mm<br />
850mm<br />
50mm Plastic Screw Cap<br />
15mm Hosetail<br />
85mm<br />
600mm<br />
15mm Hosetail<br />
1200mm<br />
IWT006 - 50L TAPERED TANK<br />
IWT007 - 60L TANK<br />
50mm Plastic Screw Cap<br />
148mm<br />
105mm<br />
50mm Plastic Screw Cap<br />
225mm<br />
120mm<br />
350mm<br />
100mm<br />
15mm Hosetail<br />
200mm<br />
15mm Hosetail<br />
1000mm<br />
360mm<br />
IWT008 - 15L UNDER TRAY HAND WASH TANK<br />
IWT009 - 30L MOUNTABLE WATER TANK<br />
IWT009 - 30L MOUNTABLE WATER TANK<br />
345mm<br />
130mm<br />
310mm<br />
200mm<br />
107mm<br />
255mm<br />
1059mm<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
483
ACCESSORIES AND SUSPENSION<br />
Terms and Conditions<br />
1. Interpretation<br />
In these Terms and Conditions of Sale (“Terms”), “Goods” means the Goods the subject<br />
of the Contract; IRONMAN 4X4 Pty. Ltd.” means the entity selling the Goods; “Buyer”<br />
means the entity purchasing the Goods; “Contract” means each contract between<br />
IRONMAN 4X4 Pty. Ltd. and the Buyer for the sale and purchase of the Goods and<br />
“order” includes” offer”.<br />
2. Terms and Conditions<br />
The only Terms of the Contract are those agreed to in writing by IRONMAN 4X4 Pty.<br />
Ltd. These Terms (to the extent they are not inconsistent with Terms agreed to in<br />
writing by IRONMAN 4X4 Pty. Ltd.) and those which are implied or imposed by law<br />
(including the Trade Practices Act 1974)) to the extent that it is not lawful or possible<br />
to exclude them. All other Terms, Conditions and Warranties are expressly excluded. lf<br />
a conflict arises between the Terms of any order made by the Buyer and these Terms,<br />
these Terms will prevail. An agreement to deliver the Goods in instalments is taken to<br />
be a separate Contract for each instalment. These Terms and each Contract including<br />
them are governed by the laws of New South Wales, and IRONMAN 4X4 Pty. Ltd. and<br />
the Buyer submit to the jurisdiction of the courts of that State. lf a Term is held to be<br />
unenforceable, the remaining Terms will apply.<br />
3. Quotations and Orders<br />
Any quotation made by IRONMAN 4X4 Pty. Ltd. will not be construed or operate as an<br />
offer or obligation to sell. IRONMAN 4X4 Pty. Ltd. reserves the right to accept or reject in<br />
its absolute discretion any order received by it. The Buyer will not be entitled to cancel<br />
or refuse delivery of, or payment for, any order made by it which has been accepted by<br />
IRONMAN 4X4 Pty. Ltd.<br />
4. Price<br />
The price payable to IRONMAN 4X4 Pty. Ltd. by the Buyer for the Goods will be the price<br />
agreed; failing which it will be the price prevailing at the date the Goods are dispatched<br />
by IRONMAN 4X4 Pty. Ltd. for delivery to the Buyer. Prices are payable in Australian<br />
currency and exclusive of delivery costs, taxes, duties and other imposts which, if<br />
changeable, are payable by the Buyer. Prices quoted in any IRONMAN 4X4 Pty. Ltd. Price<br />
List are suggested prices only and may be changed by IRONMAN 4X4 Pty. Ltd. without<br />
notice.<br />
5. Payment<br />
The Buyer must pay cash for the Goods on delivery or, at IRONMAN 4X4 Pty. Ltd.’s<br />
absolute discretion, strictly within 30 days of delivery. IRONMAN 4X4 Pty. Ltd. will<br />
appropriate payments first to outstanding interest and then to outstanding accounts in<br />
the date order rendered.<br />
6. Overdue Amounts<br />
lf Buyer fails to pay all or part of any amount to IRONMAN 4X4 Pty. Ltd. when due,<br />
interest will be payable on that amount from its due date until it is paid in full at a rate<br />
equivalent to 2% per annum above the overdraft rate from time to time charged to<br />
IRONMAN 4X4 Pty. Ltd. by its principal banker.<br />
7. Delivery<br />
IRONMAN 4X4 Pty. Ltd. will make all reasonable efforts to deliver the Goods on the dates<br />
agreed, to the place or carrier designated by the Buyer. IRONMAN 4X4 Pty. Ltd. has the<br />
right to make delivery in instalments and to deliver those Goods available for delivery.<br />
The Buyer has no right to terminate the Contract because of a delay in delivery.<br />
8. Warranty<br />
IRONMAN 4X4 Pty. Ltd. warrants that its products are manufactured to S.A.E.- Society of<br />
Automotive Engineers - specifications for the particular product. IRONMAN 4X4 Pty. Ltd.<br />
further warrants that all products sold hereunder are free from defects in material and<br />
workmanship.<br />
IRONMAN 4X4 Pty. Ltd. will, at its sole option, repair or replace any products supplied<br />
by it which are found to be defective in either materials or workmanship providing<br />
that IRONMAN 4X4 Pty. Ltd. is actually notified in writing from the Buyer of the alleged<br />
defect within ninety (90)days from the date of invoice. Any claim not made within<br />
this period shall conclusively be deemed waived by the Buyer. Repair or replacement<br />
is preconditioned on the examination of the Goods by IRONMAN 4X4 Pty. Ltd. and, if<br />
requested by IRONMAN 4X4 Pty. Ltd. return of the Goods to IRONMAN 4X4 Pty. Ltd.<br />
No products are to be returned to IRONMAN 4X4 Pty. Ltd. without its written consent,<br />
according to procedures outlined in this manual, and the receipt by the Buyer of<br />
specific shipping instructions. IRONMAN 4X4 Pty. Ltd. shall not be liable for any expense<br />
incurred by the Buyer in order to remedy any defect in its products. IRONMAN 4X4 Pty.<br />
Ltd. shall not be liable for any consequential, special, indirect or contingent damage,<br />
or expense arising directly or indirectly from any defect in its products or from use of<br />
any products. This warranty does not apply to (1) Goods bought for industrial, mining or<br />
agricultural use, (2) Goods bought for resupply or resale, (3) Goods no longer required by<br />
the Buyer, (4) Goods incorrectly chosen by the Buyer; or (5) Goods modified or altered by<br />
the Buyer (including changing colour).<br />
Except as set forth herein, and except as to title, it is expressly agreed (A) that there is<br />
no warranty or merchantability or fitness for a particular purpose, nor other warranty<br />
express, implied or statutory nor any affirmation of fact, or promises by IRONMAN 4X4<br />
Pty. Ltd. with reference to the goods which extends beyond the specifications, agreed<br />
upon by IRONMAN 4X4 Pty. Ltd. and the Buyer and (b) that the Buyer if any, mutually<br />
acknowledges that it is purchasing the goods solely on the basis of the commitments of<br />
IRONMAN 4X4 Pty. Ltd. expressly set forth herein. No person is authorised to change or<br />
add to any of IRONMAN 4X4 Pty. Ltd.’s obligations under this warranty. In no event shall<br />
IRONMAN 4X4 Pty. Ltd. be liable for anticipated profits or for incidental or consequential<br />
damages.<br />
The Buyer agrees to indemnify and hold IRONMAN 4X4 Pty. Ltd. harmless from and<br />
against any loss, injury or damage, to person or property, that extends beyond the<br />
warranties set forth above, whether the claims against IRONMAN 4X4 Pty. Ltd. or the<br />
damages are incidental or consequential.<br />
1 Year Warranty - Accessories / Mining Accessories / Underbody Protection<br />
2 Year Warranty - Premium Underbody Protection / GVM Upgrades / Load Plus<br />
3 Year Components Warranty - Ice Cube Fridge/Freezers<br />
4 Year Unlimited km Warranty - Suspension<br />
5 Year Warranty - Monster Winches, Snorkel<br />
5 Year Compressor Warranty - Ice Cube Fridge/Freezers<br />
Lifetime Limited Warranty - TREDs<br />
IRONMAN 4X4 Pty. Ltd. warrants the original buyer, only when purchased new via<br />
authorised IRONMAN 4X4 Pty. Ltd. resellers and distributors, from date of sale.<br />
Product is warranted against defects in material or workmanship that cause the product<br />
to perform below the specified limits set by IRONMAN 4X4 Pty. Ltd., to the extent that<br />
IRONMAN 4X4 Pty. Ltd. will repair or replace any parts which are found to be defective.<br />
All warranty claims must be submitted via original purchasing store or chain, unless<br />
otherwise arranged.<br />
Proof of original purchase must be presented upon request.<br />
Products may require to be returned to IRONMAN 4X4 Pty. Ltd. for assessment or repair.<br />
Postage and removal costs involved are not the responsibility of IRONMAN 4X4 Pty. Ltd.,<br />
and may only be considered upon discretion by IRONMAN 4X4 Pty. Ltd. in the event of<br />
such claim being verified.<br />
The warranty does NOT apply where, 1) acts of neglect or misuse are evident, 2)<br />
product has been modified, 3) vehicles which are modified or not the recommended<br />
vehicle of use, 4) used in racing or competition conditions without the prior consent<br />
of IRONMAN 4X4 Pty. Ltd., 5) used beyond the expectations of the original vehicle<br />
manufacturer.<br />
484 Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)
ACCESSORIES AND SUSPENSION<br />
Terms and Conditions<br />
Before installation of any product, please ensure you have received the correct parts for<br />
your application.<br />
Ordering of the correct parts is the responsibility of the Buyer. Return of a product in an<br />
unused condition will attract a 15% restock fee, where IRONMAN 4X4 Pty. Ltd. is not at<br />
fault.<br />
Return of used or soiled product, 1) outside warranty period, 2) without fault, will result<br />
in refusal of your claim and be returned at the Buyer`s expense.<br />
Damage to products through fitment error is not covered under warranty.<br />
9. Damage<br />
The Buyer acknowledges that the Goods leaving IRONMAN 4X4 Pty. Ltd’s premises<br />
are adequately packed. Claims for damage in transit must be made against the carrier<br />
and, while IRONMAN 4X4 Pty. Ltd. will not accept liability for any damage, details of<br />
any claim must be promptly advised to IRONMAN 4X4 Pty. Ltd. Prior to acknowledging<br />
delivery to the carrier, the Buyer must ensure that the complete consignment has been<br />
received as specified in the carrier’s note. Any shortage or visible damage to outer<br />
packaging must be endorsed on the carrier’s note. Any shortages and/or damages must<br />
be reported to IRONMAN 4X4 Pty. Ltd. within 72 hours or receipt.<br />
10. Title<br />
10.1 Title to the Goods will not pass to the Buyer until the earlier of:<br />
(a) IRONMAN 4X4 Pty. Ltd. being paid in full under all Contracts; or<br />
(b) the sale by the Buyer of the Goods in its ordinary course of business (in which case<br />
the Buyer must keep an accurate account of each sale, hold the proceeds of each sale<br />
separate from the Buyer’s own money and pay IRONMAN 4X4 Pty. Ltd. in full from the<br />
proceeds of the purchase price of each sale, despite that the payment is not otherwise<br />
due).<br />
10.2 Until title to the Goods passes to the Buyer, the Buyer must:<br />
(a) hold the Goods as bailed for IRONMAN 4X4 Pty. Ltd. and keep them in good order<br />
and condition;<br />
(b) not remove any markings placed by IRONMAN 4X4 Pty. Ltd. and ensure that the<br />
Goods can be readily identified and distinguished from other property in the Buyer’s<br />
possession; and<br />
(c) deliver the Goods to IRONMAN 4X4 Pty. Ltd. immediately upon demand and, for this<br />
purpose, IRONMAN 4X4 Pty. Ltd. is authorised to enter at any time any premises on<br />
which the Goods may be located (the costs incidental to which will be borne by the<br />
Buyer).<br />
11. Risk<br />
Risk in the Goods (including insurance responsibility) passes to the Buyer on delivery of<br />
the Goods to the place or carrier designated by the Buyer or, if sooner, possession of the<br />
Goods passes to the Buyer or its agent.<br />
12. Implied Terms, Limitation of Liability and Buyers Indemnity<br />
12.1 Subject to Clause 2, IRONMAN 4X4 Pty. Ltd’s liability for any breach of a condition<br />
or warranty imposed or implied by law in respect of any Goods or services which<br />
are not of a kind ordinarily acquired for personal, domestic or household use or<br />
consumption (provided that this provision does not apply if the Buyer establishes that it<br />
is not fair or reasonable for IRONMAN 4X4 Pty. Ltd. to rely on it) will be limited to:<br />
(a) in the case of Goods supplied, any one or more of the following (as IRONMAN 4X4<br />
Pty. Ltd. may determine):<br />
(i) replacement of the Goods or the supply of equivalent goods; (ii) repair of the Goods;<br />
(iv) payment of the cost of having the Goods repaired; and<br />
(b) in the case of services supplied, any one of the following (as IRONMAN 4X4 Pty. Ltd.<br />
may determine);<br />
(i) supplying the services again; or (ii) payment of the costs of having the services<br />
supplied again.<br />
12.2 Subject to these Terms, IRONMAN 4X4 Pty. Ltd. will not be liable for any loss,<br />
damage, expense or injury of any kind or nature suffered or incurred by the Buyer or<br />
any other person, arising out of or in connection with, the Contract (including, without<br />
limitation, liability due to negligence or wilful default of IRONMAN 4X4 Pty. Ltd. and<br />
any delay in delivery) or any error (whether negligent or not) in information supplied<br />
to the Buyer in connection with its subject matter or the use, possession or delivery of<br />
the Goods or the exercise by IRONMAN 4X4 Pty. Ltd. of its rights under Clause 16 and<br />
the Buyer will indemnify IRONMAN 4X4 Pty. Ltd. in relation to any such loss, damage,<br />
expense or injury.<br />
13. Claims<br />
Any claim made by the Buyer must be in writing and contain the particulars specified<br />
in the IRONMAN 4X4 Pty. Ltd’s ‘Application for Exchange or Credit’ or ‘Applications for<br />
Warranty’ and be received by IRONMAN 4X4 Pty. Ltd. within 14 days after delivery of<br />
the Goods. Subject to the Contract, no claim for credit will be recognised where (1) the<br />
Goods are made to special order or the Buyer’s specifications or drawings, (2) are no<br />
longer required by the Buyer, (3) are returned without the particulars required by this<br />
Clause, (4) the Buyer has modified or altered the Goods (including changing colour) or<br />
(5) if the IRONMAN 4X4 Pty. Ltd. <strong>Catalogue</strong> stipulates that return will not be accepted. lf<br />
the Buyer insists on returning the Goods, it must pay IRONMAN 4X4 Pty. Ltd. a handling<br />
fee equal to 40% of the price of the Goods.<br />
14. Force Majeure<br />
Despite any other Term or condition of the Contract, IRONMAN 4X4 Pty. Ltd. will not<br />
be liable for any loss, damage, expense or injury of any kind or nature suffered or<br />
incurred by the Buyer or any other person, arising out of or in connection with any<br />
delay in delivery, or failure to perform any other term or condition of the Contract where<br />
that delay or failure is caused by an act of God, fire, labour dispute, civil commotion,<br />
intervention of a Government, inability to obtain labour, materials or manufacturing<br />
facilities, accidents, interruptions of or delay in transportation or any other cause beyond<br />
IRONMAN 4X4 Pty. Ltd’s reasonable control<br />
15. Errors or Omissions<br />
IRONMAN 4X4 Pty. Ltd. has the right to correct any clerical errors or omissions, whether<br />
in computation or otherwise in any quotation, acknowledgment or document forming<br />
part of a Contract.<br />
16. Breach by Buyer<br />
lf the Buyer breaches a Contract or IRONMAN 4X4 Pty. Ltd. is not satisfied of a Buyer’s<br />
ability to pay or otherwise comply with each Contract, IRONMAN 4X4 Pty. Ltd. may by<br />
notice to the Buyer, but without compensation, terminate every Contract, suspend or<br />
cease deliveries under all Contracts, set-off all deposits against amounts due and made<br />
all amounts then outstanding by the Buyer to IRONMAN 4X4 Pty. Ltd. immediately due<br />
and payable.<br />
17. Waiver<br />
IRONMAN 4X4 Pty. Ltd’s right under the Contract are cumulative and in addition to<br />
any other rights. No delay or failure by IRONMAN 4X4 Pty. Ltd. to enforce any right is a<br />
waiver of that right. Any waiver by IRONMAN 4X4 Pty. Ltd. of any term or breach of the<br />
Contract is not to be taken as a continuing waiver or a waiver of any subsequent breach.<br />
(iiii) payment of the cost of replacing the Goods or of acquiring or obtaining equivalent<br />
goods; or<br />
Ironman 4x4 Product <strong>Catalogue</strong> - <strong>Vol</strong>ume <strong>22.2</strong> (<strong>International</strong>)<br />
485
4WD AND TOURING<br />
GEAR PRODUCT<br />
ACCESSORIES AND SUSPENSION<br />
PRODUCT BY VEHICLE<br />
ACCESSORY SPARE PARTS<br />
PRODUCT INSTALL<br />
TIME GUIDE<br />
GVM UPGRADES<br />
SUSPENSION SELECTION<br />
AND INFORMATION<br />
SUSPENSION TECHNICAL<br />
SPECIFICATIONS<br />
ACCESSORY TECHNICAL<br />
SPECIFICATIONS<br />
©Copyright 2023 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without<br />
the prior written consent of Ironman 4x4 Pty Ltd. No copyright infringement is intended on any vehicle listing image.<br />
MELBOURNE, AUSTRALIA<br />
2-8 Bessemer Drive,<br />
Dandenong South,<br />
Victoria 3175 Australia<br />
BANGKOK, THAILAND<br />
576 Soi Srinakarin 60,<br />
Srinakarin Road, Nongbon,<br />
Prawet, Bangkok,<br />
10250 Thailand<br />
OREGON, UNITED STATES<br />
12905 SW Tualatin-Sherwood Rd,<br />
Sherwood, OR, 97062<br />
United States of America<br />
TO CONTACT IRONMAN 4X4<br />
CALL 1300 731 137 OR VISIT US AT:<br />
www.ironman4x4.com<br />
Find us on Facebook<br />
facebook.com/Ironman4x4au<br />
VOLUME <strong>22.2</strong><br />
220823<br />
INTERNATIONAL
Change language