Coffee+Standards-Digital
8Green Coffee Standards cont.2.6 Water Activity Standard: Background InformationGuidelines: Follow the calibration and operations instructions given by thewater activity testing equipment manufacture, placing the appropriatequantity of coffee beans into the device.Caveat 1: Any analytical determination is at most as good as the samplingstep that precedes it.Caveat 2: Water Activity (aw) determinations cannot assure that previousinfection and spoilage did not occur on the green coffee in the past.Monitoring plans for extant presence of mycotoxins should always be in placethroughout the farm-to-roaster supply chain.Coffee Standards
9Cupping Standards3.1 Coffee to Water Ratio for CuppingWhen cupping, the ratio of 8.25 grams (whole bean) coffee (± 0.25 grams),to 5.07 fluid ounces (150 ml) water shall be used. When adjusting due tovessel size, a ratio of 1.63 grams (whole bean) coffee per 1 fluid ounce ofwater (or 0.055 g coffee per 1 ml water) shall be used.3.2 Cupping VesselCupping vessels shall be of tempered glass or ceramic material. They shallbe between 7 and 9 fluid ounces (207 ml to 266 ml), with a top diameter ofbetween 3 and 3.5 inches (76 - 89 mm). All cups used shall be of identicalvolume, dimensions and material of manufacture, and have lids.3.3 Cupping Water TemperatureCupping water temperature shall be 200°F ± 2°F (92.2 – 94.4°C) whenpoured on grounds.3.4 Cupping WaterCupping Water shall meet all the requirements listed in the SCA Standard‘Water for Brewing Specialty Coffee’, which can be found on the SCAResources web page.3.5 Grind for CuppingThe coffee used for cupping shall be ground so that 70-75 percent of thegrinds pass through the 20 mesh sieve.Coffee Standards
- Page 1 and 2: A Specialty Coffee Association Reso
- Page 4 and 5: 4What is a Coffee Standard?Standard
- Page 6 and 7: 6Green Coffee Standards cont.2.6 Wa
- Page 10 and 11: 10Cupping Standards3.6 Roast for Cu
- Page 12 and 13: 12Water Standards4.1 Water For Brew
- Page 14: Oak Lodge Farm, Leighams Road,Bickn
9
Cupping Standards
3.1 Coffee to Water Ratio for Cupping
When cupping, the ratio of 8.25 grams (whole bean) coffee (± 0.25 grams),
to 5.07 fluid ounces (150 ml) water shall be used. When adjusting due to
vessel size, a ratio of 1.63 grams (whole bean) coffee per 1 fluid ounce of
water (or 0.055 g coffee per 1 ml water) shall be used.
3.2 Cupping Vessel
Cupping vessels shall be of tempered glass or ceramic material. They shall
be between 7 and 9 fluid ounces (207 ml to 266 ml), with a top diameter of
between 3 and 3.5 inches (76 - 89 mm). All cups used shall be of identical
volume, dimensions and material of manufacture, and have lids.
3.3 Cupping Water Temperature
Cupping water temperature shall be 200°F ± 2°F (92.2 – 94.4°C) when
poured on grounds.
3.4 Cupping Water
Cupping Water shall meet all the requirements listed in the SCA Standard
‘Water for Brewing Specialty Coffee’, which can be found on the SCA
Resources web page.
3.5 Grind for Cupping
The coffee used for cupping shall be ground so that 70-75 percent of the
grinds pass through the 20 mesh sieve.
Coffee Standards