z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY PSWTRANS
►►
Query
Authorization
Purpose
Usage Notes
Responses
Messages
PSWTRans
Privilege Class: G
Use QUERY PSWTRANS to determine if the PSW option will be accepted on the
DISPLAY, DUMP and STORE commands to display or manipulate 64-bit ESA/390
PSWs when the virtual machine is in z/Architecture mode.
1. To change the PSWTRANS option, enter the SET PSWTRANS command.
Response 1:
PSWTRANS {ON }
{OFF }
{ALL }
{DISPLAY}
{STORE }
ON
HCP003E Invalid operand - operand
QUERY PSWTRANS
indicates that the PSW option is allowed for the DISPLAY, DUMP or STORE
commands when the virtual machine is in z/Architecture mode.
OFF
indicates that the PSW option is not allowed for the DISPLAY, DUMP or STORE
commands when the virtual machine is in z/Architecture mode.
ALL
indicates that the PSW option will be accepted for the DISPLAY, DUMP and
STORE commands to reference or change PSW data in the 64-bit ESA/390
format when the vitual machine is in z/Architecture mode (64-bit PSW displayed
and 64-bits accepted on STORE).
DISPLAY
indicates that the PSW option will be accepted for the DISPLAY and DUMP
commands (but not STORE) to reference PSW data in the 64-bit ESA/390
format when the virtual machine is in z/Architecture mode.
STORE
indicates that the PSW option will be accepted for the STORE command (but
not DISPLAY or DUMP) to change PSW data in the 64-bit ESA/390 format
when the virtual machine is in z/Architecture mode.
►◄
Chapter 2. CP Commands 939