z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY PROMPT
►►
Query
Authorization
Purpose
Operands
Usage Notes
Responses
Messages
PROMPt
AFTER_RESTart
AFTER_SHUTDOWN_REIPL
Privilege Class: B
Use QUERY PROMPT to display whether CP will prompt the operator for startup
information following a CP restart after an abend or a shutdown REIPL.
AFTER_RESTart
specifies to display whether CP will prompt the operator for startup information
after a CP restart after an abend or not.
AFTER_SHUTDOWN_REIPL
specifies to display whether CP will prompt the operator for startup information
after a shutdown REIPL or not.
1. Use the SET PROMPT command to change the settings of the prompt
operands.
2. Use the FEATURES ENABLE/DISABLE PROMPT configuration file statement to
initialize the settings of the prompt operands at IPL time.
3. If the SET PROMPT command was not used or the FEATURES ENABLE
PROMPT statement was not specified in the configuration file, the operator will
not be prompted for start up information after a system restart or a shutdown
REIPL.
Response 1:
To query the settings of the prompt after_restart operand enter the following:
q prompt after_restart
The system will not prompt for startup information after restart
Ready;
To query the settings of the prompt after_shutdown_reipl operand enter the
following:
q prompt after_shutdown_reipl
The system will not prompt for startup information after a
shutdown reipl
Ready;
QUERY PROMPT
HCP002E Invalid operand - operand HCP003E Invalid option - command contains
extra option(s) starting with option
►◄
Chapter 2. CP Commands 937