z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY PRODUCT
►►
Query
Notes:
Authorization
Purpose
Operands
(1)
PRODuct
Usage Notes
▼
PRODID
STATE
Privilege Class: C, E
ALL
vmses_prodid
ALL
ENabled
DISabled
1 You can specify each keyword (PRODID or STATE) only once.
QUERY PRODUCT
Use QUERY PRODUCT to display information regarding the PRODUCT statements
defined to the system in the system configuration file at IPL and defined using the
SET PRODUCT command.
PRODID ALL
tells CP to display information about all product IDs defined to the system. This
is the default.
PRODID vmses_prodid
is the identifer used by VMSES/E to install and service the given product.
vmses_prodid must be a 7 or 8 character identifier.
STATE ALL
tells the system to display the associated product information regardless of the
current state.
STATE ENABLED
displays information about the product IDs that are enabled on the system.
STATE DISABLED
displays information about product IDs that are explicitly disabled on the
system.
1. QUERY PRODUCT commands gathers information about the current
PRODUCT statements defined to the system. Although this information may be
contained in the system configuration file, it may have been changed with a
SET PRODUCT command since that time.
2. The output from QUERY PRODUCT is sorted by product ID from lowest to
highest.
3. QUERY PRODUCT is not intended to be a programming interface. Programs
requiring enablement data should use DIAGNOSE code X'27C'.
►◄
Chapter 2. CP Commands 935