z/VM: CP Commands and Utilities Reference - z/VM - IBM

Examples
TYPE QDIO
restricts the responses to VM LAN segments of the specified type.
ACTive
ACTivity
When the ACTive keyword is specified, active connections are described in the
response for each LAN. Each active connection represents a simulated Network
Interface Card (NIC) that has been coupled to the VM LAN. The following
information is included for each connection:
v Identity of the virtual adapter (owner and virtual device number)
v The list of VLAN IDs each is authorized to use.
v IP Addresses registered to the adapter.
ACCesslist
When the ACCesslist keyword is specified, the current access list is displayed
for each LAN. For a RESTRICTED LAN, this is the list of all users who are
authorized to connect to this LAN with a simulated network adapter.
Note: This is the list authorized through the use of the SET LAN command
using the GRANT and REVOKE operands. If the Guest LAN is protected
by an External Security Manager (ESM), ESM interfaces must be used
to determine the true authorization list.
DETails
When the DETails keyword is specified, all available detail is displayed for each
LAN. This is similar to specifying ACTIVE, except the display includes users
that are coupled, but not active.
VLAN vlanid
When the VLAN keyword is specified, the information displayed is restricted to
connections that have the specified vlanid active. VLAN ANY displays all
connections regardless of any VLAN settings. VLAN NONE displays
connections that have not enabled VLAN support.
1. QUERY LAN
List information about a specific Guest LAN.
cp query lan subnta
LAN SYSTEM SUBNTA Type: QDIO Connected: 11 Maxconn: INFINITE
PERSISTENT UNRESTRICTED IP Accounting: ON
2. QUERY LAN ACTive:
The following example shows that LAN SUBNTA has 3 coupled adapters, and
describes the adapters connected to the Guest LAN.
cp query lan subnta active
LAN SYSTEM SUBNTA Type: QDIO Connected: 3 Maxconn: INFINITE
PERSISTENT UNRESTRICTED IP Accounting: ON
Adapter Owner: LAPLACE1 NIC: 1FC0 Name: LaPlace1
RX Packets: 262 Discarded: 0 Errors: 0
TX Packets: 320 Discarded: 6 Errors: 0
RX Bytes: 30212 TX Bytes: 21181
Device: 1FC2 Unit: 002 Role: DATA
Options: Broadcast Multicast IPv6 IPv4 VLAN
Unicast IP Addresses:
9.60.59.59 MAC: 02-00-00-00-00-05
FE80::200:0:100:5 MAC: 02-00-00-00-00-05
Multicast IP Addresses:
224.0.0.1 MAC: 01-00-5E-00-00-01
FF02::1 MAC: 33-33-00-00-00-01
FF02::1:FF00:5 MAC: 33-33-FF-00-00-05
QUERY LAN
Chapter 2. CP Commands 837