z/VM: CP Commands and Utilities Reference - z/VM - IBM

QUERY FRAMES
QUERY FRAMES
►►
Query
Authorization
Purpose
FRames
Responses
Privilege Class: A, B, E
Use QUERY FRAMES to display the status of real storage.
The first two lines show how all of storage is divided. The next two lines show the
usable storage, and the third pair of lines provides a breakdown of the PAGING
area storage. When host real storage >= 2G, an additional set of lines is issued
describing that storage.
SYSGEN REAL USABLE OFFLINE
nnnnnn nnnnnn nnnnnn nnnnnn
V=R RESNUC PAGING TRACE RIO370
000000 nnnnnn nnnnnn nnnnnn 0000000
AVAIL PAGNUC LOCKRS LOCKCP SAVE FREE LOCKRIO
nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn 000000
Storage >= 2G:
Online = nnnnnnnnnn Available List = nnnnnnnnnn
Not init = nnnnnnnnnn Offline = nnnnnnnnnn
SYSGEN
identifies the number of 4 KB frames specified at system generation.
REAL
identifies the number of 4 KB frames of storage within the addressing capability
of the processor.
USABLE
identifies the number of frames of usable storage.
OFFLINE
identifies the number of frames taken offline because of error.
Notes:
804 z/VM: CP Commands and Utilities Reference
1. If SYSGEN < REAL and SYSGEN = USABLE + OFFLINE, it is because
pages below SYSGEN have been assigned to the hardware.
2. Offline does not include any frames that have been deconfigured by the
processor controller.
V=R
is always zero.
RESNUC
identifies the number of frames in the resident CP nucleus.
PAGING
identifies the number of frames available for paging.
►◄