z/VM: CP Commands and Utilities Reference - z/VM - IBM

Messages
CP will log userid’s attempts to issue
multiple commands with a DIAGNOSE X’08’.
This setting is locked against changes.
userid
represents the user ID whose D8ONECMD settings are being displayed.
This response indicates that any attempt to process a DIAGNOSE code X'08'
containing multiple CP commands will not fail but will cause a message to be sent
to operations personnel. The last line of the response indicates that only a
privileged user who is also not the command issuer can change the settings.
Response 3:
CP will block userid’s attempts to issue
multiple commands with a DIAGNOSE X’08’.
This setting is locked against changes.
userid
represents the user ID whose D8ONECMD settings are being displayed.
This response indicates that any attempt to process a DIAGNOSE code X'08'
containing multiple CP commands will fail and will cause a message to be sent to
operations personnel. The last line of the response indicates that only a privileged
user who is also not the command issuer can change the settings.
Any of the above messages may also have the following line as the second line of
the response:
This setting is not locked against changes.
This response indicates that a privileged user can change the command filtering
level for the selected virtual machine (even if the target virtual machine is the
command issuer’s virtual machine).
HCP003E Invalid option - {option|command
contains extra option(s) starting with
option}
HCP045E userid not logged on
QUERY D8ONECMD
Chapter 2. CP Commands 765