z/VM: CP Commands and Utilities Reference - z/VM - IBM

The following is the response to QUERY CRYPTO CAMQS if any crypto facilities
are online for CAM (Crypto Asynchronous Message) or DAC (Direct Attached
Crypto) processing.
CAMQ nn is {not in use }
{in use by userid}
where:
nn is the CAM queue number in decimal
userid
is the userid of the virtual machine to which the CAM queue is allocated
It is repeated for each installed CAM queue.
Response 6:
The following is the response to QUERY CRYPTO DOMAINS if a cryptographic
facility is online, but due to a hardware problem, no domains are installed.
No domains are installed
Response 7:
The following is the response to QUERY CRYPTO CAMQS if a cryptographic
facility is online, but due to a hardware problem, no CAM queues are installed.
No CAM queues are installed
Response 8
The following is the response to QUERY CRYPTO APQS if a Cryptographic Adjunct
Processor is installed.
AP mm tt Queue nn is status
where:
mm
is the AP number in decimal
tt is the AP type: PCICC, PCICA, PCIXCC, or CEX2C
nn is the queue number in decimal
status
is the queue status, and may be any of the following:
Installed
indicates that the queue is installed and operational
Checkstop
indicates that the queue is in a checkstop condition and is unavailable
Deconfigured
indicates that the AP is not in the configuration
Busy indicates that the AP is temporarily busy
QUERY CRYPTO
Superseded by ss
where ss is the type of queue chosen by z/VM for queue-sharing when
a mixture of queue types is installed.
DEDICATED TO userid
indicates that the userid has dedicated access to the AP queue.
Chapter 2. CP Commands 759