z/VM: CP Commands and Utilities Reference - z/VM - IBM

CHANGE
52 z/VM: CP Commands and Utilities Reference
For example, if you specify COPY 4 and FLASH name 2, the first two copies of
your file are flashed, whereas the last two copies remain unflashed. If ALL is
specified, the flash count always matches the copy count. ALL is the default.
FLash OFF
resets the flash parameters. Blanks are inserted into the flash name field of the
specified spool files, and the count is set to 0.
MOdify name n
assigns a copy modification module to be used when printing the spool files on
the 3800. This function makes it possible to alter text by either preventing the
printing of certain information or by adding labels to output. The name must be
one to four characters.
The n variable selects one of the character sets specified by the CHARS
operand to be used for the copy modification text. The values 0, 1, 2, or 3
correspond to the order in which the character sets have been specified. If no n
is specified, the first character set (0) is assumed.
MOdify OFF
resets the modify parameters. Blanks are inserted into the modify name field of
the spool files and, when printing takes place, no modification occurs. The
modify number (n) is set to 0.
FCB name
FCB 6
FCB 8
FCB 10
FCB 12
specifies the forms control buffer to be used when printing the file on the 3800
printer. The name variable is a 1- to 4-character name of an FCB image, or the
number 6, 8, 10, or 12. The number tells the 3800 to print the entire spool file
at 6, 8, 10, or 12 lines to the inch, regardless of the size of the paper currently
loaded. Using these unique numbers assures that printed material fits onto a
specified page size. Note, however, that FCB 10 prints only on a 3800 Model 3
printer.
FCB OFF
resets the FCB parameter. Blanks are inserted into the FCB name field of the
spool file or files and, when the file is printed, a default FCB controls the vertical
spacing of the output text.
CHars name
CHars name CHars name
specifies the name of the character set or sets used to print the spool file or
files on a 3800 printer. The name or names must be from one to four characters
with a maximum of four names specified. You need to use CHARS more than
once only if nameN is the same as an option name (for example, FORM) or
with a user ID. If more than one name is specified, and modification is also
specified, the order in which the names appear determines the table used for
copy modification text.
CHars OFF
resets the CHARS parameters. Blanks are inserted into the name fields of the
character sets used for output generation. The spool files, therefore, use a
default character set when actually printed.
SEClabel ssssssss
assigns a security label to the chosen files. ssssssss is the security label to be