z/VM: CP Commands and Utilities Reference - z/VM - IBM

Messages
The options for the third line of the response can be:
Category Possible Values Meaning
Destination value DEST Printer services the specified destination values.
The printer can service up to 4 destination values.
The first value for the device is always OFF if it
was not specifically set by either a START
command, or at initialization with the RDEVICE
statement in the system configuration file. If it was
set, the specified destination is shown. If the
remaining destination values were not specified,
the values are null and are shown as – NONE –. If
they were specified, the specified value is shown.
The last line of this response only appears if there is a file active on the card
punch. The line in the example above tells you the punch at the real device number
1F30 is punching the spool file 0042, owned by the user JAMES. The number of
records remaining for output in the file is 12K. K is the number of records in
thousands rounded to the nearest 1000. If the number is greater than 999499, the
number is shown as nnnM. M represents the number of lines in millions rounded to
the nearest million. There are two copies remaining for output. The sequence for
the file on the punch is 001.
Responses from Boxed Unit Record Devices:
If a unit record that is not dedicated to a user is unavailable, you see a message
like the following:
RDR 000F BOXED
HCP003E Invalid option - option
HCP020E Userid missing or invalid.
000F is the real device number of the card reader that is unavailable. RDR might
be replaced by PRT or PUN.
HCP263E Too many operands were supplied for
this command.
QUERY ALL
Chapter 2. CP Commands 685