z/VM: CP Commands and Utilities Reference - z/VM - IBM

MONITOR SAMPLE
As a result of the MONITOR SAMPLE START command, sample monitoring has
successfully started. There is at least one user with an active path connected to
*MONITOR for sample data collection.
This response is sent to the user that issued the command. If this user is not the
system operator, the response containing [userid] is also sent to the system
operator.
Response 2:
MONITOR SAMPLE STARTED -- RECORDING IS PENDING
- or -
MONITOR SAMPLE STARTED BY [userid] -- RECORDING IS PENDING
MONITOR SAMPLE START has been issued. Because there is no user with an
active path connected to *MONITOR for sample data collection, sample monitoring
is held pending. It shall remain pending until the first user is connected to
*MONITOR for sample data collection.
This response is sent to the user that issued the command. If this user is not the
system operator, the response containing [userid] is also sent to the system
operator.
Response 3:
MONITOR SAMPLE STOPPED
- or -
MONITOR SAMPLE STOPPED BY [userid]
MONITOR SAMPLE STOP has been issued and sample monitoring has been
stopped.
This response is sent to the user that issued the command. If this user is not the
system operator, the response containing [userid] is also sent to the system
operator.
Response 4:
Command complete
642 z/VM: CP Commands and Utilities Reference
The MONITOR command has completed successfully.