z/VM: CP Commands and Utilities Reference - z/VM - IBM

LOGON
HCP1502E The directory entry for this userid is in
use.
HCP1505I The device being used for LOGON
conflicts with the console definition in
the directory.
HCP1510I Device vdev not defined; device vdev
already defined
HCP1512E The System/370 machine mode was
requested, but CP does not support
System/370 mode virtual machines; the
machine mode will be set to XA
instead.
HCP1513E Log on already in progress on {GRAF
rdev|GRAF ldev|luname|SYSC}
HCP1558E Command processing cannot
complete.
HCP1700I One or more virtual CPUs are not
defined due to an error in the CP
directory.
HCP2094I Requested ABSOLUTE I/O priority
range falls outside range currently
allowed by CP and has been changed
to fit within CP’s range.
HCP2550I The console has been defined as a
3215 because a console mode of 3270
is not supported by the VTAM Service
Machine controlling the real terminal.
HCP2551E The console has been defined as a
3215 because the real device is not a
3270 display.
HCP2553E TERMINAL BRKKEY name is not
allowed during this session; it has
been changed to PA1.
HCP2554E TERMINAL BREAKIN GUESTCTL is not
allowed during this session; it has
been changed to IMMED.
HCP2808E User ID is a CF Service Machine and
may not be started by the LOGON
command.
588 z/VM: CP Commands and Utilities Reference
HCP2880E userid vaddr is not linked, CSE LINK I/O
error, code cc.
HCP6050E Your userid is not authorized to logon
userid userid.
HCP6053E You cannot issue the
{LOGON|AUTOLOG|XAUTOLOG}
command because the maximum
number of users allowed is already
logged on.
HCP6059I One or more devices were not defined
because an error occurred while
reading the CP directory.
HCP6525E External Security Manager is
unavailable.
HCP6704E Missing token at end of line