z/VM: CP Commands and Utilities Reference - z/VM - IBM

LOGOFF
Responses
non-SNA TTY display terminal, or a logical terminal, it is accepted and
processed. The HOLD option is accepted but ignored on all other terminals.
6. If your installation has coded the E3270HLD feature in the system real I/O
configuration file for your TTY display terminal connected to your DACU control
unit 7171, the telecommunication connection always remains in effect,
regardless of the HOLD option.
7. Users who are being logged off from the system will be given QUICKDSP
designation to expedite the logoff of the user.
Response 1:
CONNECT= hh:mm:ss VIRTCPU= mmm:ss.hs TOTCPU= mmm:ss.hs
LOGOFF AT hh:mm:ss zone weekday mm/dd/yy
CONNECT= hh:mm:ss
is the actual clock time in hours, minutes, and seconds spent in the current
session.
VIRTCPU= mmm:ss.hs
is the virtual processor time in minutes, seconds, and hundredths of seconds
used in the current session.
TOTCPU= mmm:ss.hs
is the total processor time in minutes, seconds, and hundredths of seconds
(including virtual and overhead) used in the current session.
These times are either the elapsed time for the entire session or the elapsed
time since the ACNT command was entered for this user.
LOGOFF AT hh:mm:ss
is the current time in hours, minutes, and seconds of your logoff.
zone
is the time zone.
weekday
is the current day of the week.
576 z/VM: CP Commands and Utilities Reference
mm/dd/yy
is the date in month/day-of-month/year format.
The system also responds with one of the following, depending on the type of
terminal being used:
Type of Terminal
Message
3270 family
Press ENTER or CLEAR key to continue
SNA/CCS terminal
Press ENTER key to continue
Pressing the appropriate key on your terminal causes the logo to appear on the
terminal, which readies the terminal for the next session. For terminals not listed
above, control automatically returns to CP, and the logo is displayed.
Response 2:
{type {rdev} } LOGOFF AS userid USERS = nnnnn
{ {ldev} }
{luname }
{SYSC }